Skip to contentSkip to conversation

memory: aemif: add support for machine code

PATCH Applied Bartosz Golaszewski 3 participants 5 messages Apr 19, 2018 – Apr 24, 2018

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

v2 cover memory: aemif: add support for machine code

From: Bartosz Golaszewski <[email protected]>

This is a follow-up to the series that contained both changes to the aemif driver and platform code. It contains only the driver changes.

As the first step in removing duplicate support for aemif from the kernel we need to add support for board files to the aemif memory driver.

First patch just uses a static string for the ti-aemif driver name.

The second adds support for board files to the aemif driver.

This series includes changes requested by Sekhar in his code review:
- made aemif the parent of each sub-device before registering it
- documented the new members in aemif_platform_data

v1 -> v2:
- actually iterate over abus entries instead of always accessing the first one

Bartosz Golaszewski (2):
memory: aemif: don't rely on kbuild for driver's name
memory: aemif: add support for board files

 drivers/memory/ti-aemif.c              | 60 +++++++++++++++++---------
 include/linux/platform_data/ti-aemif.h | 25 +++++++++++
 2 files changed, 64 insertions(+), 21 deletions(-)
Signature · 1 line
2.17.0
#1 lore raw

PATCH v2 1/2 memory: aemif: don't rely on kbuild for driver's name

From: Bartosz Golaszewski <[email protected]>

We want to use aemif from board files. Use a static name in the driver's code.

---
 drivers/memory/ti-aemif.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/memory/ti-aemif.c +1 -1
index 2744b1b91b57..588e58d40d1b 100644
@@ -422,7 +422,7 @@ static struct platform_driver aemif_driver = {
 	.probe = aemif_probe,
 	.remove = aemif_remove,
 	.driver = {
-		.name = KBUILD_MODNAME,
+		.name = "ti-aemif",
 		.of_match_table = of_match_ptr(aemif_of_match),
 	},
 };
Signature · 1 line
2.17.0
#2 lore raw

PATCH v2 2/2 memory: aemif: add support for board files

In reply to Bartosz Golaszewski

From: Bartosz Golaszewski <[email protected]>

Currently aemif is supported in two places separately. By the platform driver in drivers/memory and by a hand crafted driver in mach-davinci.

We want to drop the latter but also keep the legacy mode. Add support for board files to the aemif driver.

The new structure in platform data currently only contains the chip select number, since currently existing users don't require anything else, but it can be extended in the future.

While extending the platform data struct, add kernel docs describing its members.

---
 drivers/memory/ti-aemif.c              | 58 +++++++++++++++++---------
 include/linux/platform_data/ti-aemif.h | 25 +++++++++++
 2 files changed, 63 insertions(+), 20 deletions(-)
drivers/memory/ti-aemif.c +38 -20
index 588e58d40d1b..31112f622b88 100644
@@ -339,9 +339,6 @@ static int aemif_probe(struct platform_device *pdev)
 	struct aemif_platform_data *pdata;
 	struct of_dev_auxdata *dev_lookup;
 
-	if (np == NULL)
-		return 0;
-
 	aemif = devm_kzalloc(dev, sizeof(*aemif), GFP_KERNEL);
 	if (!aemif)
 		return -ENOMEM;
@@ -363,8 +360,10 @@ static int aemif_probe(struct platform_device *pdev)
 
 	aemif->clk_rate = clk_get_rate(aemif->clk) / MSEC_PER_SEC;
 
-	if (of_device_is_compatible(np, "ti,da850-aemif"))
+	if (np && of_device_is_compatible(np, "ti,da850-aemif"))
 		aemif->cs_offset = 2;
+	else if (pdata)
+		aemif->cs_offset = pdata->cs_offset;
 
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	aemif->base = devm_ioremap_resource(dev, res);
@@ -373,15 +372,23 @@ static int aemif_probe(struct platform_device *pdev)
 		goto error;
 	}
 
-	/*
-	 * For every controller device node, there is a cs device node that
-	 * describe the bus configuration parameters. This functions iterate
-	 * over these nodes and update the cs data array.
-	 */
-	for_each_available_child_of_node(np, child_np) {
-		ret = of_aemif_parse_abus_config(pdev, child_np);
-		if (ret < 0)
-			goto error;
+	if (np) {
+		/*
+		 * For every controller device node, there is a cs device node
+		 * that describe the bus configuration parameters. This
+		 * functions iterate over these nodes and update the cs data
+		 * array.
+		 */
+		for_each_available_child_of_node(np, child_np) {
+			ret = of_aemif_parse_abus_config(pdev, child_np);
+			if (ret < 0)
+				goto error;
+		}
+	} else if (pdata && pdata->num_abus_data > 0) {
+		for (i = 0; i < pdata->num_abus_data; i++, aemif->num_cs++) {
+			aemif->cs_data[i].cs = pdata->abus_data[i].cs;
+			aemif_get_hw_params(pdev, i);
+		}
 	}
 
 	for (i = 0; i < aemif->num_cs; i++) {
@@ -394,14 +401,25 @@ static int aemif_probe(struct platform_device *pdev)
 	}
 
 	/*
-	 * Create a child devices explicitly from here to
-	 * guarantee that the child will be probed after the AEMIF timing
-	 * parameters are set.
+	 * Create a child devices explicitly from here to guarantee that the
+	 * child will be probed after the AEMIF timing parameters are set.
 	 */
-	for_each_available_child_of_node(np, child_np) {
-		ret = of_platform_populate(child_np, NULL, dev_lookup, dev);
-		if (ret < 0)
-			goto error;
+	if (np) {
+		for_each_available_child_of_node(np, child_np) {
+			ret = of_platform_populate(child_np, NULL,
+						   dev_lookup, dev);
+			if (ret < 0)
+				goto error;
+		}
+	} else {
+		for (i = 0; i < pdata->num_sub_devices; i++) {
+			pdata->sub_devices[i].dev.parent = dev;
+			ret = platform_device_register(&pdata->sub_devices[i]);
+			if (ret) {
+				dev_warn(dev, "Error register sub device %s\n",
+					 pdata->sub_devices[i].name);
+			}
+		}
 	}
 
 	return 0;
include/linux/platform_data/ti-aemif.h +25 -0
index ac72e115093c..e6407bafcbf8 100644
@@ -16,8 +16,33 @@
 
 #include <linux/of_platform.h>
 
+/**
+ * struct aemif_abus_data - Async bus configuration parameters.
+ *
+ * @cs - Chip-select number.
+ */
+struct aemif_abus_data {
+	u32 cs;
+};
+
+/**
+ * struct aemif_platform_data - Data to set up the TI aemif driver.
+ *
+ * @dev_lookup: of_dev_auxdata passed to of_platform_populate() for aemif
+ *              subdevices.
+ * @cs_offset: Lowest allowed chip-select number.
+ * @abus_data: Array of async bus configuration entries.
+ * @num_abus_data: Number of abus entries.
+ * @sub_devices: Array of platform subdevices.
+ * @num_sub_devices: Number of subdevices.
+ */
 struct aemif_platform_data {
 	struct of_dev_auxdata *dev_lookup;
+	u32 cs_offset;
+	struct aemif_abus_data *abus_data;
+	size_t num_abus_data;
+	struct platform_device *sub_devices;
+	size_t num_sub_devices;
 };
 
 #endif /* __TI_DAVINCI_AEMIF_DATA_H__ */
Signature · 1 line
2.17.0
#3 lore raw
In reply to Bartosz Golaszewski
Quoted 17 lines · Bartosz Golaszewski

From: Bartosz Golaszewski <[email protected]>

This is a follow-up to the series that contained both changes to the aemif driver and platform code. It contains only the driver changes.

As the first step in removing duplicate support for aemif from the kernel we need to add support for board files to the aemif memory driver.

First patch just uses a static string for the ti-aemif driver name.

The second adds support for board files to the aemif driver.

This series includes changes requested by Sekhar in his code review:
- made aemif the parent of each sub-device before registering it
- documented the new members in aemif_platform_data

Quoted 8 lines

v1 -> v2:
- actually iterate over abus entries instead of always accessing the first one

Bartosz Golaszewski (2):
memory: aemif: don't rely on kbuild for driver's name
memory: aemif: add support for board files

Applied. Should show up in next soon.

Sekhar, You can use below branch.

git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone.git
'for_4.18/soc-drivers'

#4 lore raw
Quoted 26 lines · santosh.shilimkar at oracle.com
Quoted 17 lines · Bartosz Golaszewski

From: Bartosz Golaszewski <[email protected]>

This is a follow-up to the series that contained both changes to the aemif driver and platform code. It contains only the driver changes.

As the first step in removing duplicate support for aemif from the kernel we need to add support for board files to the aemif memory driver.

First patch just uses a static string for the ti-aemif driver name.

The second adds support for board files to the aemif driver.

This series includes changes requested by Sekhar in his code review:
- made aemif the parent of each sub-device before registering it
- documented the new members in aemif_platform_data

Quoted 8 lines

v1 -> v2:
- actually iterate over abus entries instead of always accessing the ?? first one

Bartosz Golaszewski (2):
?? memory: aemif: don't rely on kbuild for driver's name ?? memory: aemif: add support for board files

Quoted 5 lines

Applied. Should show up in next soon.

Sekhar, You can use below branch.

git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone.git ?'for_4.18/soc-drivers'

Thanks Santosh!

Regards,
Sekhar