ccid: Fix dwProtocols advertisement of T=0

Commit d7d218ef02d87c637d20d64da8f575d434ff6f78 attempted to change dwProtocols to only advertise support for T=0 and not T=1. The change was incorrect as it changed 0x00000003 to 0x00010000.

lsusb -v in a linux guest shows:
"dwProtocols 65536 (Invalid values detected)", though the
smart card could still be accessed. Windows 7 does not detect inserted smart cards and logs the the following Error in the Event Logs:

Source: Smart Card Service
Event ID: 610
Smart Card Reader 'QEMU QEMU USB CCID 0' rejected IOCTL SET_PROTOCOL:
Incorrect function. If this error persists, your smart card or reader may not be functioning correctly

Command Header: 03 00 00 00

Setting to 0x00000001 fixes the Windows issue.

---
 hw/usb/dev-smartcard-reader.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

index e6468057a0..cabb564788 100644
@@ -329,8 +329,8 @@ static const uint8_t qemu_ccid_descriptor[] = {
                      */
         0x07,       /* u8  bVoltageSupport; 01h - 5.0v, 02h - 3.0, 03 - 1.8 */
 
-        0x00, 0x00, /* u32 dwProtocols; RRRR PPPP. RRRR = 0000h.*/
-        0x01, 0x00, /* PPPP: 0001h = Protocol T=0, 0002h = Protocol T=1 */
+        0x01, 0x00, /* u32 dwProtocols; RRRR PPPP. RRRR = 0000h.*/
+        0x00, 0x00, /* PPPP: 0001h = Protocol T=0, 0002h = Protocol T=1 */
                     /* u32 dwDefaultClock; in kHZ (0x0fa0 is 4 MHz) */
         0xa0, 0x0f, 0x00, 0x00,
                     /* u32 dwMaximumClock; */

2.14.3

Added to usb queue.

thanks,
Gerd