Skip to contentSkip to conversation

configs: add openssl for kernel where necessary

PATCH Superseded Vincent Stehle 4 participants 5 messages Apr 18, 2018 – Apr 22, 2018

lore
Share & tools
lore

Vincent Stehle

author
#0 lore raw

PATCH 1/1 configs: add openssl for kernel where necessary

From: Vincent Stehl? <[email protected]>

Add host-openssl to those configs, which need it for the Linux kernel build.

Signed-off-by Vincent Stehl? <[email protected]>
Cc Matthew Weber <[email protected]>
Cc Marcin Niestroj <[email protected]>
Cc Fabio Estevam <[email protected]>
---
 configs/freescale_t1040d4rdb_defconfig | 1 +
 configs/grinn_chiliboard_defconfig     | 1 +
 configs/mx25pdk_defconfig              | 1 +
 configs/wandboard_defconfig            | 1 +
 configs/warp7_defconfig                | 1 +
 5 files changed, 5 insertions(+)
configs/freescale_t1040d4rdb_defconfig +1 -0
index b8d162736c..df44046ef5 100644
@@ -15,6 +15,7 @@ BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.15.7"
 BR2_LINUX_KERNEL_DEFCONFIG="corenet64_smp"
 BR2_LINUX_KERNEL_DTS_SUPPORT=y
 BR2_LINUX_KERNEL_INTREE_DTS_NAME="fsl/t1040d4rdb"
+BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y
 
 # Filesystem
 BR2_TARGET_ROOTFS_CPIO=y
configs/grinn_chiliboard_defconfig +1 -0
index 07fa0b3797..81d7bae911 100644
@@ -10,6 +10,7 @@ BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.16.1"
 BR2_LINUX_KERNEL_DEFCONFIG="omap2plus"
 BR2_LINUX_KERNEL_DTS_SUPPORT=y
 BR2_LINUX_KERNEL_INTREE_DTS_NAME="am335x-chiliboard"
+BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y
 BR2_TARGET_ROOTFS_EXT2=y
 BR2_TARGET_ROOTFS_EXT2_4=y
 BR2_TARGET_UBOOT=y
configs/mx25pdk_defconfig +1 -0
index f86ce7af02..ec4f8b8289 100644
@@ -32,3 +32,4 @@ BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.15.7"
 BR2_LINUX_KERNEL_DEFCONFIG="imx_v4_v5"
 BR2_LINUX_KERNEL_DTS_SUPPORT=y
 BR2_LINUX_KERNEL_INTREE_DTS_NAME="imx25-pdk"
+BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y
configs/wandboard_defconfig +1 -0
index 406bd113ff..4265fdcfb0 100644
@@ -24,6 +24,7 @@ BR2_LINUX_KERNEL_DEFCONFIG="imx_v6_v7"
 BR2_LINUX_KERNEL_DTS_SUPPORT=y
 BR2_LINUX_KERNEL_INTREE_DTS_NAME="imx6q-wandboard imx6dl-wandboard imx6q-wandboard-revb1 imx6dl-wandboard-revb1 imx6q-wandboard-revd1 imx6dl-wandboard-revd1 imx6qp-wandboard-revd1"
 BR2_LINUX_KERNEL_INSTALL_TARGET=y
+BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y
 # required tools to create the SD card image
 BR2_PACKAGE_HOST_DOSFSTOOLS=y
 BR2_PACKAGE_HOST_GENIMAGE=y
configs/warp7_defconfig +1 -0
index 344c4430b0..e1744d8275 100644
@@ -19,6 +19,7 @@ BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.15.15"
 BR2_LINUX_KERNEL_DEFCONFIG="imx_v6_v7"
 BR2_LINUX_KERNEL_DTS_SUPPORT=y
 BR2_LINUX_KERNEL_INTREE_DTS_NAME="imx7s-warp"
+BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y
 
 # U-Boot
 BR2_TARGET_UBOOT=y
Signature · 1 line
2.17.0
#1 lore raw

PATCH 1/1 configs: add openssl for kernel where necessary

Hi Vincent,

Thanks for noticing grinn_chiliboard_defconfig! Please also add grinn_liteboard_defconfig, as it has the same build issues with missing openssl.

Regards,
Marcin

Quoted 15 lines · Vincent Stehle

From: Vincent Stehl? <[email protected]>

Add host-openssl to those configs, which need it for the Linux kernel build.

Signed-off-by Vincent Stehl? <[email protected]>
Cc Matthew Weber <[email protected]>
Cc Marcin Niestroj <[email protected]>
Cc Fabio Estevam <[email protected]>
---
  configs/freescale_t1040d4rdb_defconfig | 1 +
  configs/grinn_chiliboard_defconfig     | 1 + >   configs/mx25pdk_defconfig              | 1 +
  configs/wandboard_defconfig            | 1 +
  configs/warp7_defconfig                | 1 +
  5 files changed, 5 insertions(+)

<snip>

Signature · 1 line
Marcin Niestroj
author
#2 lore raw

PATCH v2 1/1 configs: add openssl for kernel where necessary

From: Vincent Stehl? <[email protected]>

Add host-openssl to those configs, which need it for the Linux kernel build.

Signed-off-by Vincent Stehl? <[email protected]>
Cc Matthew Weber <[email protected]>
Cc Marcin Niestroj <[email protected]>
Cc Fabio Estevam <[email protected]>

---

Quoted 3 lines · Marcin Niestroj

Thanks for noticing grinn_chiliboard_defconfig! Please also add grinn_liteboard_defconfig, as it has the same build issues with missing openssl.

Hi Marcin,

Here you go!

I also updated mx6cubox_defconfig while at it.

Best regards,

Vincent.

 configs/freescale_t1040d4rdb_defconfig | 1 +
 configs/grinn_chiliboard_defconfig     | 1 +
 configs/grinn_liteboard_defconfig      | 1 +
 configs/mx25pdk_defconfig              | 1 +
 configs/mx6cubox_defconfig             | 1 +
 configs/wandboard_defconfig            | 1 +
 configs/warp7_defconfig                | 1 +
 7 files changed, 7 insertions(+)
configs/freescale_t1040d4rdb_defconfig +1 -0
index b8d162736c..df44046ef5 100644
@@ -15,6 +15,7 @@ BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.15.7"
 BR2_LINUX_KERNEL_DEFCONFIG="corenet64_smp"
 BR2_LINUX_KERNEL_DTS_SUPPORT=y
 BR2_LINUX_KERNEL_INTREE_DTS_NAME="fsl/t1040d4rdb"
+BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y
 
 # Filesystem
 BR2_TARGET_ROOTFS_CPIO=y
configs/grinn_chiliboard_defconfig +1 -0
index 07fa0b3797..81d7bae911 100644
@@ -10,6 +10,7 @@ BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.16.1"
 BR2_LINUX_KERNEL_DEFCONFIG="omap2plus"
 BR2_LINUX_KERNEL_DTS_SUPPORT=y
 BR2_LINUX_KERNEL_INTREE_DTS_NAME="am335x-chiliboard"
+BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y
 BR2_TARGET_ROOTFS_EXT2=y
 BR2_TARGET_ROOTFS_EXT2_4=y
 BR2_TARGET_UBOOT=y
configs/grinn_liteboard_defconfig +1 -0
index f644d36f06..5f3ca07552 100644
@@ -10,6 +10,7 @@ BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.16.2"
 BR2_LINUX_KERNEL_DEFCONFIG="imx_v6_v7"
 BR2_LINUX_KERNEL_DTS_SUPPORT=y
 BR2_LINUX_KERNEL_INTREE_DTS_NAME="imx6ul-liteboard"
+BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y
 BR2_TARGET_ROOTFS_EXT2=y
 BR2_TARGET_ROOTFS_EXT2_4=y
 BR2_TARGET_UBOOT=y
configs/mx25pdk_defconfig +1 -0
index f86ce7af02..ec4f8b8289 100644
@@ -32,3 +32,4 @@ BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.15.7"
 BR2_LINUX_KERNEL_DEFCONFIG="imx_v4_v5"
 BR2_LINUX_KERNEL_DTS_SUPPORT=y
 BR2_LINUX_KERNEL_INTREE_DTS_NAME="imx25-pdk"
+BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y
configs/mx6cubox_defconfig +1 -0
index 6357720aa4..2996c375ff 100644
@@ -24,6 +24,7 @@ BR2_LINUX_KERNEL_DEFCONFIG="imx_v6_v7"
 BR2_LINUX_KERNEL_DTS_SUPPORT=y
 BR2_LINUX_KERNEL_INTREE_DTS_NAME="imx6q-cubox-i imx6dl-cubox-i imx6q-hummingboard imx6dl-hummingboard"
 BR2_LINUX_KERNEL_INSTALL_TARGET=y
+BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y
 # required tools to create the SD card image
 BR2_PACKAGE_HOST_DOSFSTOOLS=y
 BR2_PACKAGE_HOST_GENIMAGE=y
configs/wandboard_defconfig +1 -0
index 406bd113ff..4265fdcfb0 100644
@@ -24,6 +24,7 @@ BR2_LINUX_KERNEL_DEFCONFIG="imx_v6_v7"
 BR2_LINUX_KERNEL_DTS_SUPPORT=y
 BR2_LINUX_KERNEL_INTREE_DTS_NAME="imx6q-wandboard imx6dl-wandboard imx6q-wandboard-revb1 imx6dl-wandboard-revb1 imx6q-wandboard-revd1 imx6dl-wandboard-revd1 imx6qp-wandboard-revd1"
 BR2_LINUX_KERNEL_INSTALL_TARGET=y
+BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y
 # required tools to create the SD card image
 BR2_PACKAGE_HOST_DOSFSTOOLS=y
 BR2_PACKAGE_HOST_GENIMAGE=y
configs/warp7_defconfig +1 -0
index 344c4430b0..e1744d8275 100644
@@ -19,6 +19,7 @@ BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.15.15"
 BR2_LINUX_KERNEL_DEFCONFIG="imx_v6_v7"
 BR2_LINUX_KERNEL_DTS_SUPPORT=y
 BR2_LINUX_KERNEL_INTREE_DTS_NAME="imx7s-warp"
+BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y
 
 # U-Boot
 BR2_TARGET_UBOOT=y
Signature · 1 line
2.17.0
Applied
#4 lore raw

PATCH v2 1/1 configs: add openssl for kernel where necessary

In reply to Vincent Stehle

Hello,

Quoted 10 lines · Vincent Stehle

From: Vincent Stehl? <[email protected]>

Add host-openssl to those configs, which need it for the Linux kernel build.

Signed-off-by Vincent Stehl? <[email protected]>
Cc Matthew Weber <[email protected]>
Cc Marcin Niestroj <[email protected]>
Cc Fabio Estevam <[email protected]>

---

Applied to master, thanks.

Thomas

Signature · 3 lines
Thomas Petazzoni, CTO, Bootlin (formerly Free Electrons)
Embedded Linux and Kernel engineering
https://bootlin.com