Skip to contentSkip to conversation

ARM: dts: imx6qdl-tx6: Remove 'bus-format-override' property

PATCH New Fabio Estevam 2 participants 2 messages Apr 10, 2018 – Apr 23, 2018

Subsystems (2)
Device tree bindings Arm i.MX and Layerscape
lore
Share & tools
lore

Fabio Estevam

author reviewer
#0 lore raw

PATCH 1/1 ARM: dts: imx6qdl-tx6: Remove 'bus-format-override' property

From: Fabio Estevam <[email protected]>

The 'bus-format-override' property is not documented nor used anywhere else, so just remove it.

Reported-by Rob Herring <[email protected]>
Signed-off-by Fabio Estevam <[email protected]>
---
 arch/arm/boot/dts/imx6qdl-tx6-lcd.dtsi | 1 -
 arch/arm/boot/dts/imx6qdl-tx6-mb7.dtsi | 3 ---
 2 files changed, 4 deletions(-)
arch/arm/boot/dts/imx6qdl-tx6-lcd.dtsi +0 -1
index 5102fc4..79f2354 100644
@@ -77,7 +77,6 @@
 		enable-gpios = <&gpio3 29 GPIO_ACTIVE_HIGH>;
 		power-supply = <&reg_3v3>;
 		backlight = <&backlight>;
-		bus-format-override = "rgb24";
 
 		port {
 			lcd_panel_in: endpoint {
arch/arm/boot/dts/imx6qdl-tx6-mb7.dtsi +0 -3
index 4c4e2e1..410972e 100644
@@ -54,19 +54,16 @@
 
 	lcd-panel {
 		compatible = "edt,et057090dhu";
-		bus-format-override = "rgb24";
 		pixelclk-active = <0>;
 	};
 
 	lvds0-panel {
 		compatible = "edt,etml1010g0dka";
-		bus-format-override = "spwg-18";
 		pixelclk-active = <0>;
 	};
 
 	lvds1-panel {
 		compatible = "edt,etml1010g0dka";
-		bus-format-override = "spwg-18";
 		pixelclk-active = <0>;
 	};
 };
Signature · 1 line
2.7.4