powerpc/xive: add OPAL extensions for the XIVE native exploitation support
RFC PATCH 2/16 powerpc/xive: add OPAL extensions for the XIVE native exploitation support
The support for XIVE native exploitation mode in Linux/KVM needs a couple more OPAL calls to configure the sPAPR guest and to save/restore the state of the XIVE internals.
Signed-off-by Cédric Le Goater <[email protected]>
--- arch/powerpc/include/asm/opal-api.h | 13 ++- arch/powerpc/include/asm/opal.h | 12 +++ arch/powerpc/include/asm/xive.h | 19 +++++ arch/powerpc/platforms/powernv/opal-wrappers.S | 4 + arch/powerpc/sysdev/xive/native.c | 107 +++++++++++++++++++++++++ 5 files changed, 152 insertions(+), 3 deletions(-)
arch/powerpc/include/asm/opal-api.h +10 -3
@@ -186,8 +186,8 @@#define OPAL_XIVE_FREE_IRQ 140#define OPAL_XIVE_SYNC 141#define OPAL_XIVE_DUMP 142 -#define OPAL_XIVE_RESERVED3 143 -#define OPAL_XIVE_RESERVED4 144 +#define OPAL_XIVE_GET_QUEUE_STATE 143 +#define OPAL_XIVE_SET_QUEUE_STATE 144#define OPAL_SIGNAL_SYSTEM_RESET 145#define OPAL_NPU_INIT_CONTEXT 146#define OPAL_NPU_DESTROY_CONTEXT 147
@@ -204,7 +204,14 @@#define OPAL_NPU_SPA_SETUP 159#define OPAL_NPU_SPA_CLEAR_CACHE 160#define OPAL_NPU_TL_SET 161 -#define OPAL_LAST 161 +#define OPAL_SENSOR_READ_U64 162 +#define OPAL_SENSOR_GROUP_ENABLE 163 +#define OPAL_PCI_GET_PBCQ_TUNNEL_BAR 164 +#define OPAL_PCI_SET_PBCQ_TUNNEL_BAR 165 +#define OPAL_HANDLE_HMI2 166 +#define OPAL_XIVE_GET_VP_STATE 167 +#define OPAL_XIVE_SET_VP_STATE 168 +#define OPAL_LAST 168/* Device tree flags */
arch/powerpc/include/asm/opal.h +12 -0
@@ -273,6 +273,18 @@ int64_t opal_xive_allocate_irq(uint32_t chip_id);int64_t opal_xive_free_irq (uint32_t girq);int64_t opal_xive_sync (uint32_t type,uint32_t id);int64_t opal_xive_dump (uint32_t type,uint32_t id); +int64_t opal_xive_get_queue_state (uint64_t vp,uint32_t prio, +__be32 *out_version, +__be64 *out_state); +int64_t opal_xive_set_queue_state (uint64_t vp,uint32_t prio, +uint32_t version, +uint64_t new_state); +int64_t opal_xive_get_vp_state (uint64_t vp, +__be32 *out_version, +__be64 *out_state); +int64_t opal_xive_set_vp_state (uint64_t vp, +uint32_t version, +uint64_t new_state);int64_t opal_pci_set_p2p (uint64_t phb_init,uint64_t phb_target,uint64_t desc,uint16_t pe_number);
arch/powerpc/include/asm/xive.h +19 -0
@@ -139,6 +139,25 @@ extern int xive_native_disable_vp(u32 vp_id);extern int xive_native_get_vp_info (u32 vp_id,u32 *out_cam_id,u32 *out_chip_id);extern bool xive_native_has_single_escalation (void ); +extern int xive_native_get_queue_info (u32 vp_id,uint32_t prio, +u64 *out_qpage, +u64 *out_qsize, +u64 *out_qeoi_page, +u32 *out_escalate_irq, +u64 *out_qflags); + +/* Version is 1, backward compatible to 1 */ +#define XIVE_STATE_VERSION 0x00010001 +#define XIVE_STATE_COMPAT (v) ((v) & 0xffff) + +extern int xive_native_get_queue_state (u32 vp_id,uint32_t prio,u32 *out_version, +u64 *out_state); +extern int xive_native_set_queue_state (u32 vp_id,uint32_t prio,u32 version, +u64 state); +extern int xive_native_get_vp_state (u32 vp_id,u32 *out_version, +u64 *out_state); +extern int xive_native_set_vp_state (u32 vp_id,u32 version,u64 state); +#else static inline bool xive_enabled (void ) {return false; }
arch/powerpc/platforms/powernv/opal-wrappers.S +4 -0
@@ -307,6 +307,10 @@ OPAL_CALL(opal_xive_get_vp_info, OPAL_XIVE_GET_VP_INFO); OPAL_CALL(opal_xive_set_vp_info, OPAL_XIVE_SET_VP_INFO); OPAL_CALL(opal_xive_sync, OPAL_XIVE_SYNC); OPAL_CALL(opal_xive_dump, OPAL_XIVE_DUMP); +OPAL_CALL(opal_xive_get_queue_state, OPAL_XIVE_GET_QUEUE_STATE); +OPAL_CALL(opal_xive_set_queue_state, OPAL_XIVE_SET_QUEUE_STATE); +OPAL_CALL(opal_xive_get_vp_state, OPAL_XIVE_GET_VP_STATE); +OPAL_CALL(opal_xive_set_vp_state, OPAL_XIVE_SET_VP_STATE); OPAL_CALL(opal_signal_system_reset, OPAL_SIGNAL_SYSTEM_RESET); OPAL_CALL(opal_npu_init_context, OPAL_NPU_INIT_CONTEXT); OPAL_CALL(opal_npu_destroy_context, OPAL_NPU_DESTROY_CONTEXT);
arch/powerpc/sysdev/xive/native.c +107 -0
110 lines not on this page · raw message
Signature · 1 line
2.13.6