Remove old build scripts

deleted file mode 100755
index e3c3190c0..000000000
@@ -1,71 +0,0 @@
-This scripts contains any and all scripts which will help in testing the make
-infrastructure.
-
-A brief description is as follows:
-
-Foundation Build Regression Test Scripts:
-
-- build_test_functions.sh	    -	Generic library functions for all
-					pull / build / test scenarios.
-
-There are a total of 3 different positive pull / build / test scenarios that
-have been identified which should be tested on a regular basis, both prior to
-and after commit:
-
-- test_install_in_build_tree.sh     -	Build in srcdir, install in srcdir.
-- test_install_out_of_build_tree.sh -	Build in srcdir, install in
-					rootfs / outside of builddir // srcdir.
-- test_out_of_build_tree.sh         -	Build outside of srcdir, install in
-					rootfs / outside of builddir // srcdir.
-
-The scenarios are defined in include/mk/env_pre.mk (look for BUILD_TREE_STATE).
-
-These scenarios all fulfill the following requirements:
-1. Pull LTP from a predefined SCM (cvs is the only method supported today, but
-   other SCMs could be added when and if support is properly enabled by the
-   project admins).
-2. Apply a custom -p0'able patch if defined with LTP_PATCH (THIS MUST BE THE
-   ABSOLUTE PATH TO THE PATCH!!!).
-3. Configure (make autotools -> configure).
-4. Compile (make all).
-5. Install (make install).
-6. Test (execltp -v).
-
-If you want to add another scenario, please email the list requesting the
-enhancement and we'll see what we can do to accomodate it if the scenario
-functionally makes sense.
-
-You can use a variety of variables to control how things operate, such as:
-
-- CLEAN_TEMPFILES	- !1 - don't clean up the temporary generated files
-			  after the scenario is complete.
-			- 1 - clean up the temporary generated files after the
-			  scenario is complete.
-- MAKEFLAGS		- flags which will be passed directly into make
-			  (please ensure that any and all options passed are
-			  properly escaped beforehand if quoted).
-- TMPDIR		- base temporary directory for all generated and
-			  pulled files.
-
-About the warning...
-
-If you see:
-
-	WARNING: Read the [.../]README before executing this script [...]!
-
-this is by design. I inserted this in the script to intentionally underscore
-the fact that folks need to be very careful when executing this script and
-exercise the following common sense:
-
-1. Use a chroot, or lower-privileged user (preferrably a test user). If there's
-   a bug in the make infrastructure, you could end up eating crow after your
-   build host gets hosed!
-2. Properly chmod your files / directories! You shouldn't have 00777 set on
-   anything that you don't mind parting with, or you are begging for trouble!
-
-   set I_HAVE_READ_THE_README_WARNING to 1 in your environment in order to
-   proceed.
-
-Utilities:
-- ltp-missing-install-files.py - A script which does a real basic first cut at
-				 trying to find missing commands or test files.

243 lines not on this page · raw message

44 lines not on this page · raw message

116 lines not on this page · raw message

47 lines not on this page · raw message

49 lines not on this page · raw message

51 lines not on this page · raw message