Hyper-V netvsc PMD (and VMBus)
Subsystems (2)
v5 cover Hyper-V netvsc PMD (and VMBus)
This is a revised version of the Hyper-V native bus (VMBus) and network device (netvsc) drivers. This virtual device is used in Microsoft Hyper-V in Windows 10, Windows Server 2016 and Azure. Most of this code was extracted from FreeBSD and some of this is from earlier code donated by Brocade.
Only Linux is supported at present, but the code is split to allow future FreeBSD and Windows support.
This version works with upstream kernel (4.16) but in that mode only a single queue is supported. With additional patches that are pending for 5.0 kernel, multi-queue support works as well.
Device binding is best done via driverctl; this required some additional fixes to kernel and driverctl to work correctly. Linux kernel vmbus support needed to support sysfs driver_override and driverctl needed to handle non-PCI bus from udev.
https://gitlab.com/driverctl/driverctl/merge_requests/3
http://driverdev.linuxdriverproject.org/pipermail/driverdev-devel/2018-April/118889.html
v5
- rebase to current 18.05
- fix message from vmbus due to race on sysfs for sub channel
v4
- don't enable by default because of uuid library dependency
- api's are internal no need to mark experimental
- add netvsc ini file
- fix MAINTAINERS entry
v3
- fix documentation to format correctly and include more info about binding
- fix build on 32 bit
- minor white space and indentation fixes
Stephen Hemminger (4):
bus/vmbus: add hyper-v virtual bus support net/netvsc: add hyper-v netvsc network device net/netvsc: add documentation
bus/vmbus and net/netvsc: add meson build support
MAINTAINERS | 11 + config/common_base | 13 + config/meson.build | 7 + doc/guides/nics/features/netvsc.ini | 23 + doc/guides/nics/index.rst | 1 + doc/guides/nics/netvsc.rst | 97 ++ doc/guides/rel_notes/release_18_05.rst | 5 + drivers/bus/Makefile | 1 + drivers/bus/meson.build | 2 +- drivers/bus/vmbus/Makefile | 36 + drivers/bus/vmbus/linux/Makefile | 3 + drivers/bus/vmbus/linux/vmbus_bus.c | 355 +++++ drivers/bus/vmbus/linux/vmbus_uio.c | 390 ++++++ drivers/bus/vmbus/meson.build | 16 + drivers/bus/vmbus/private.h | 132 ++ drivers/bus/vmbus/rte_bus_vmbus.h | 397 ++++++ drivers/bus/vmbus/rte_bus_vmbus_version.map | 28 + drivers/bus/vmbus/rte_vmbus_reg.h | 344 +++++ drivers/bus/vmbus/vmbus_bufring.c | 241 ++++ drivers/bus/vmbus/vmbus_channel.c | 405 ++++++ drivers/bus/vmbus/vmbus_common.c | 286 ++++ drivers/bus/vmbus/vmbus_common_uio.c | 232 ++++ drivers/net/Makefile | 1 + drivers/net/meson.build | 2 +- drivers/net/netvsc/Makefile | 23 + drivers/net/netvsc/hn_ethdev.c | 732 ++++++++++ drivers/net/netvsc/hn_logs.h | 35 + drivers/net/netvsc/hn_nvs.c | 533 +++++++ drivers/net/netvsc/hn_nvs.h | 243 ++++ drivers/net/netvsc/hn_rndis.c | 1101 +++++++++++++++ drivers/net/netvsc/hn_rndis.h | 26 + drivers/net/netvsc/hn_rxtx.c | 1221 +++++++++++++++++ drivers/net/netvsc/hn_var.h | 140 ++ drivers/net/netvsc/meson.build | 13 + drivers/net/netvsc/ndis.h | 378 +++++ drivers/net/netvsc/rndis.h | 414 ++++++ drivers/net/netvsc/rte_pmd_netvsc_version.map | 5 + mk/rte.app.mk | 2 + 38 files changed, 7892 insertions(+), 2 deletions(-) create mode 100644 doc/guides/nics/features/netvsc.ini create mode 100644 doc/guides/nics/netvsc.rst create mode 100644 drivers/bus/vmbus/Makefile create mode 100644 drivers/bus/vmbus/linux/Makefile create mode 100644 drivers/bus/vmbus/linux/vmbus_bus.c create mode 100644 drivers/bus/vmbus/linux/vmbus_uio.c create mode 100644 drivers/bus/vmbus/meson.build create mode 100644 drivers/bus/vmbus/private.h create mode 100644 drivers/bus/vmbus/rte_bus_vmbus.h create mode 100644 drivers/bus/vmbus/rte_bus_vmbus_version.map create mode 100644 drivers/bus/vmbus/rte_vmbus_reg.h create mode 100644 drivers/bus/vmbus/vmbus_bufring.c create mode 100644 drivers/bus/vmbus/vmbus_channel.c create mode 100644 drivers/bus/vmbus/vmbus_common.c create mode 100644 drivers/bus/vmbus/vmbus_common_uio.c create mode 100644 drivers/net/netvsc/Makefile create mode 100644 drivers/net/netvsc/hn_ethdev.c create mode 100644 drivers/net/netvsc/hn_logs.h create mode 100644 drivers/net/netvsc/hn_nvs.c create mode 100644 drivers/net/netvsc/hn_nvs.h create mode 100644 drivers/net/netvsc/hn_rndis.c create mode 100644 drivers/net/netvsc/hn_rndis.h create mode 100644 drivers/net/netvsc/hn_rxtx.c create mode 100644 drivers/net/netvsc/hn_var.h create mode 100644 drivers/net/netvsc/meson.build create mode 100644 drivers/net/netvsc/ndis.h create mode 100644 drivers/net/netvsc/rndis.h create mode 100644 drivers/net/netvsc/rte_pmd_netvsc_version.map
Signature · 1 line
2.17.0
PATCH v5 1/4 bus/vmbus: add hyper-v virtual bus support
This patch adds support for an additional bus type Virtual Machine BUS (VMBUS) on Microsoft Hyper-V in Windows 10, Windows Server 2016 and Azure. Most of this code was extracted from FreeBSD and some of this is from earlier code donated by Brocade.
Only Linux is supported at present, but the code is split to allow future FreeBSD and Windows support.
The bus support relies on the uio_hv_generic driver from Linux kernel 4.16. Multiple queue support requires additional sysfs interfaces which is in kernel 5.0 (a.k.a 4.17).
--- MAINTAINERS | 3 + config/common_base | 5 + drivers/bus/Makefile | 1 + drivers/bus/vmbus/Makefile | 36 ++ drivers/bus/vmbus/linux/Makefile | 3 + drivers/bus/vmbus/linux/vmbus_bus.c | 355 +++++++++++++++++ drivers/bus/vmbus/linux/vmbus_uio.c | 390 +++++++++++++++++++ drivers/bus/vmbus/private.h | 132 +++++++ drivers/bus/vmbus/rte_bus_vmbus.h | 397 +++++++++++++++++++ drivers/bus/vmbus/rte_bus_vmbus_version.map | 28 ++ drivers/bus/vmbus/rte_vmbus_reg.h | 344 +++++++++++++++++ drivers/bus/vmbus/vmbus_bufring.c | 241 ++++++++++++ drivers/bus/vmbus/vmbus_channel.c | 405 ++++++++++++++++++++ drivers/bus/vmbus/vmbus_common.c | 286 ++++++++++++++ drivers/bus/vmbus/vmbus_common_uio.c | 232 +++++++++++ mk/rte.app.mk | 1 + 16 files changed, 2859 insertions(+) create mode 100644 drivers/bus/vmbus/Makefile create mode 100644 drivers/bus/vmbus/linux/Makefile create mode 100644 drivers/bus/vmbus/linux/vmbus_bus.c create mode 100644 drivers/bus/vmbus/linux/vmbus_uio.c create mode 100644 drivers/bus/vmbus/private.h create mode 100644 drivers/bus/vmbus/rte_bus_vmbus.h create mode 100644 drivers/bus/vmbus/rte_bus_vmbus_version.map create mode 100644 drivers/bus/vmbus/rte_vmbus_reg.h create mode 100644 drivers/bus/vmbus/vmbus_bufring.c create mode 100644 drivers/bus/vmbus/vmbus_channel.c create mode 100644 drivers/bus/vmbus/vmbus_common.c create mode 100644 drivers/bus/vmbus/vmbus_common_uio.c
MAINTAINERS +3 -0
@@ -389,6 +389,9 @@ VDEV bus driver M: Jianfeng Tan <[email protected]> F: drivers/bus/vdev/ +VMBUS bus driver +M: Stephen Hemminger <[email protected]> +F: drivers/bus/vmbus/ Networking Drivers ------------------
config/common_base +5 -0
@@ -397,6 +397,11 @@ CONFIG_RTE_LIBRTE_PMD_FAILSAFE=y CONFIG_RTE_LIBRTE_MVPP2_PMD=n # +# Compile support for VMBus library +# +CONFIG_RTE_LIBRTE_VMBUS=n + + # Compile virtual device driver for NetVSC on Hyper-V/Azure # CONFIG_RTE_LIBRTE_VDEV_NETVSC_PMD=n
drivers/bus/Makefile +1 -0
@@ -9,5 +9,6 @@ DIRS-$(CONFIG_RTE_LIBRTE_FSLMC_BUS) += fslmc endif DIRS-$(CONFIG_RTE_LIBRTE_PCI_BUS) += pci DIRS-$(CONFIG_RTE_LIBRTE_VDEV_BUS) += vdev +DIRS-$(CONFIG_RTE_LIBRTE_VMBUS) += vmbus include $(RTE_SDK)/mk/rte.subdir.mk
drivers/bus/vmbus/Makefile new file +36 -0
@@ -0,0 +1,36 @@ +# SPDX-License-Identifier: BSD-3-Clause + +include $(RTE_SDK)/mk/rte.vars.mk + +LIB = librte_bus_vmbus.a +LIBABIVER := 1 +EXPORT_MAP := rte_bus_vmbus_version.map + +CFLAGS += -I$(SRCDIR) +CFLAGS += -O3 $(WERROR_FLAGS) +CFLAGS += -DALLOW_EXPERIMENTAL_API + +ifneq ($(CONFIG_RTE_EXEC_ENV_LINUXAPP),) +SYSTEM := linux +endif +ifneq ($(CONFIG_RTE_EXEC_ENV_BSDAPP),) +$(error "VMBUS not implemented for BSD yet") +endif + +CFLAGS += -I$(RTE_SDK)/drivers/bus/vmbus/$(SYSTEM) +CFLAGS += -I$(RTE_SDK)/lib/librte_eal/common +CFLAGS += -I$(RTE_SDK)/lib/librte_eal/$(SYSTEM)app/eal + +LDLIBS += -lrte_eal -lrte_mbuf -lrte_mempool -lrte_ring +LDLIBS += -lrte_ethdev -luuid + +include $(RTE_SDK)/drivers/bus/vmbus/$(SYSTEM)/Makefile +SRCS-$(CONFIG_RTE_LIBRTE_VMBUS) := $(addprefix $(SYSTEM)/,$(SRCS)) +SRCS-$(CONFIG_RTE_LIBRTE_VMBUS) += vmbus_common.c +SRCS-$(CONFIG_RTE_LIBRTE_VMBUS) += vmbus_channel.c vmbus_bufring.c +SRCS-$(CONFIG_RTE_LIBRTE_VMBUS) += vmbus_common_uio.c + +SYMLINK-$(CONFIG_RTE_LIBRTE_VMBUS)-include += rte_bus_vmbus.h +SYMLINK-$(CONFIG_RTE_LIBRTE_VMBUS)-include += rte_vmbus_reg.h + +include $(RTE_SDK)/mk/rte.lib.mk
drivers/bus/vmbus/linux/Makefile new file +3 -0
@@ -0,0 +1,3 @@ +# SPDX-License-Identifier: BSD-3-Clause + +SRCS += vmbus_bus.c vmbus_uio.c
drivers/bus/vmbus/linux/vmbus_bus.c new file +355 -0
355 lines not on this page · raw message
drivers/bus/vmbus/linux/vmbus_uio.c new file +390 -0
390 lines not on this page · raw message
drivers/bus/vmbus/private.h new file +132 -0
132 lines not on this page · raw message
drivers/bus/vmbus/rte_bus_vmbus.h new file +397 -0
397 lines not on this page · raw message
drivers/bus/vmbus/rte_bus_vmbus_version.map new file +28 -0
@@ -0,0 +1,28 @@ +/* SPDX-License-Identifier: BSD-3-Clause */ +DPDK_18.05 { + global: + + rte_vmbus_chan_close; + rte_vmbus_chan_open; + rte_vmbus_chan_recv; + rte_vmbus_chan_recv_raw; + rte_vmbus_chan_rx_empty; + rte_vmbus_chan_send; + rte_vmbus_chan_send_sglist; + rte_vmbus_chan_signal_tx; + rte_vmbus_irq_mask; + rte_vmbus_irq_read; + rte_vmbus_irq_unmask; + rte_vmbus_map_device; + rte_vmbus_max_channels; + rte_vmbus_probe; + rte_vmbus_probe_one; + rte_vmbus_register; + rte_vmbus_scan; + rte_vmbus_sub_channel_index; + rte_vmbus_subchan_open; + rte_vmbus_unmap_device; + rte_vmbus_unregister; + + local: *; +};
drivers/bus/vmbus/rte_vmbus_reg.h new file +344 -0
344 lines not on this page · raw message
drivers/bus/vmbus/vmbus_bufring.c new file +241 -0
241 lines not on this page · raw message
drivers/bus/vmbus/vmbus_channel.c new file +405 -0
405 lines not on this page · raw message
drivers/bus/vmbus/vmbus_common.c new file +286 -0
286 lines not on this page · raw message
drivers/bus/vmbus/vmbus_common_uio.c new file +232 -0
232 lines not on this page · raw message
mk/rte.app.mk +1 -0
@@ -189,6 +189,7 @@ ifeq ($(CONFIG_RTE_LIBRTE_VHOST),y) _LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_VHOST) += -lrte_pmd_vhost endif # $(CONFIG_RTE_LIBRTE_VHOST) _LDLIBS-$(CONFIG_RTE_LIBRTE_VMXNET3_PMD) += -lrte_pmd_vmxnet3_uio +_LDLIBS-$(CONFIG_RTE_LIBRTE_VMBUS) += -lrte_bus_vmbus -luuid ifeq ($(CONFIG_RTE_LIBRTE_BBDEV),y) _LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_BBDEV_NULL) += -lrte_pmd_bbdev_null
Signature · 1 line
2.17.0
PATCH v5 2/4 net/netvsc: add hyper-v netvsc network device
In reply to Stephen HemmingerThe driver supports Hyper-V networking directly like virtio for KVM or vmxnet3 for VMware.
This code is based off of the FreeBSD driver. The file and variable names are kept the same to help with understanding (with most of the BSD style warts removed).
--- MAINTAINERS | 8 + config/common_base | 8 + drivers/net/Makefile | 1 + drivers/net/netvsc/Makefile | 23 + drivers/net/netvsc/hn_ethdev.c | 732 ++++++++++ drivers/net/netvsc/hn_logs.h | 35 + drivers/net/netvsc/hn_nvs.c | 533 +++++++ drivers/net/netvsc/hn_nvs.h | 243 ++++ drivers/net/netvsc/hn_rndis.c | 1101 +++++++++++++++ drivers/net/netvsc/hn_rndis.h | 26 + drivers/net/netvsc/hn_rxtx.c | 1221 +++++++++++++++++ drivers/net/netvsc/hn_var.h | 140 ++ drivers/net/netvsc/ndis.h | 378 +++++ drivers/net/netvsc/rndis.h | 414 ++++++ drivers/net/netvsc/rte_pmd_netvsc_version.map | 5 + mk/rte.app.mk | 1 + 16 files changed, 4869 insertions(+) create mode 100644 drivers/net/netvsc/Makefile create mode 100644 drivers/net/netvsc/hn_ethdev.c create mode 100644 drivers/net/netvsc/hn_logs.h create mode 100644 drivers/net/netvsc/hn_nvs.c create mode 100644 drivers/net/netvsc/hn_nvs.h create mode 100644 drivers/net/netvsc/hn_rndis.c create mode 100644 drivers/net/netvsc/hn_rndis.h create mode 100644 drivers/net/netvsc/hn_rxtx.c create mode 100644 drivers/net/netvsc/hn_var.h create mode 100644 drivers/net/netvsc/ndis.h create mode 100644 drivers/net/netvsc/rndis.h create mode 100644 drivers/net/netvsc/rte_pmd_netvsc_version.map
MAINTAINERS +8 -0
@@ -560,6 +560,14 @@ F: drivers/net/vdev_netvsc/ F: doc/guides/nics/vdev_netvsc.rst F: doc/guides/nics/features/vdev_netvsc.ini +Microsoft Hyper-V netvsc - EXPERIMENTAL +M: Stephen Hemminger <[email protected]> +M: "K. Y. Srinivasan" <[email protected]> +M: Haiyang Zhang <[email protected]> +F: drivers/net/hyperv/ +F: doc/guides/nics/netvsc.rst +F: doc/guides/nics/features/netvsc.ini + Netcope szedata2 M: Matej Vido <[email protected]> F: drivers/net/szedata2/
config/common_base +8 -0
@@ -401,7 +401,15 @@ CONFIG_RTE_LIBRTE_MVPP2_PMD=n # CONFIG_RTE_LIBRTE_VMBUS=n +# +# Compile native PMD for Hyper-V/Azure +# +CONFIG_RTE_LIBRTE_NETVSC_PMD=n +CONFIG_RTE_LIBRTE_NETVSC_DEBUG_RX=n +CONFIG_RTE_LIBRTE_NETVSC_DEBUG_TX=n +CONFIG_RTE_LIBRTE_NETVSC_DEBUG_DUMP=n +# # Compile virtual device driver for NetVSC on Hyper-V/Azure # CONFIG_RTE_LIBRTE_VDEV_NETVSC_PMD=n
drivers/net/Makefile +1 -0
@@ -33,6 +33,7 @@ DIRS-$(CONFIG_RTE_LIBRTE_LIO_PMD) += liquidio DIRS-$(CONFIG_RTE_LIBRTE_MLX4_PMD) += mlx4 DIRS-$(CONFIG_RTE_LIBRTE_MLX5_PMD) += mlx5 DIRS-$(CONFIG_RTE_LIBRTE_MVPP2_PMD) += mvpp2 +DIRS-$(CONFIG_RTE_LIBRTE_NETVSC_PMD) += netvsc DIRS-$(CONFIG_RTE_LIBRTE_NFP_PMD) += nfp DIRS-$(CONFIG_RTE_LIBRTE_BNXT_PMD) += bnxt DIRS-$(CONFIG_RTE_LIBRTE_PMD_NULL) += null
drivers/net/netvsc/Makefile new file +23 -0
@@ -0,0 +1,23 @@ +# SPDX-License-Identifier: BSD-3-Clause + +include $(RTE_SDK)/mk/rte.vars.mk + +LIB = librte_pmd_netvsc.a + +CFLAGS += -O3 $(WERROR_FLAGS) +CFLAGS += -DALLOW_EXPERIMENTAL_API + +EXPORT_MAP := rte_pmd_netvsc_version.map + +LIBABIVER := 1 + +SRCS-$(CONFIG_RTE_LIBRTE_NETVSC_PMD) += hn_ethdev.c +SRCS-$(CONFIG_RTE_LIBRTE_NETVSC_PMD) += hn_rxtx.c +SRCS-$(CONFIG_RTE_LIBRTE_NETVSC_PMD) += hn_rndis.c +SRCS-$(CONFIG_RTE_LIBRTE_NETVSC_PMD) += hn_nvs.c + +LDLIBS += -lrte_eal -lrte_mbuf -lrte_mempool -lrte_ring +LDLIBS += -lrte_ethdev -lrte_net -lrte_kvargs +LDLIBS += -lrte_bus_vmbus + +include $(RTE_SDK)/mk/rte.lib.mk
drivers/net/netvsc/hn_ethdev.c new file +732 -0
732 lines not on this page · raw message
drivers/net/netvsc/hn_logs.h new file +35 -0
@@ -0,0 +1,35 @@ +/* SPDX-License-Identifier: BSD-3-Clause */ + +#ifndef _HN_LOGS_H_ +#define _HN_LOGS_H_ + +#include <rte_log.h> + +extern int hn_logtype_init; + +#define PMD_INIT_LOG(level, fmt, args...) \ + rte_log(RTE_LOG_ ## level, hn_logtype_init, "%s(): " fmt "\n",\ + __func__, ## args) +#define PMD_INIT_FUNC_TRACE () PMD_INIT_LOG(DEBUG, " >>") + +#ifdef RTE_LIBRTE_NETVSC_DEBUG_RX +#define PMD_RX_LOG(level, fmt, args...) \ + RTE_LOG(level, PMD, "%s() rx: " fmt "\n", __func__, ## args) +#else +#define PMD_RX_LOG(level, fmt, args...) do { } while (0) +#endif + +#ifdef RTE_LIBRTE_NETVSC_DEBUG_TX +#define PMD_TX_LOG(level, fmt, args...) \ + RTE_LOG(level, PMD, "%s() tx: " fmt "\n", __func__, ## args) +#else +#define PMD_TX_LOG(level, fmt, args...) do { } while (0) +#endif + + +extern int hn_logtype_driver; +#define PMD_DRV_LOG(level, fmt, args...) \ + rte_log(RTE_LOG_ ## level, hn_logtype_driver, "%s(): " fmt "\n", \ + __func__, ## args) + +#endif /* _HN_LOGS_H_ */
drivers/net/netvsc/hn_nvs.c new file +533 -0
533 lines not on this page · raw message
drivers/net/netvsc/hn_nvs.h new file +243 -0
243 lines not on this page · raw message
drivers/net/netvsc/hn_rndis.c new file +1101 -0
1,101 lines not on this page · raw message
drivers/net/netvsc/hn_rndis.h new file +26 -0
@@ -0,0 +1,26 @@ +/* SPDX-License-Identifier: BSD-3-Clause */ + +#include "rndis.h" + +struct hn_data ; + +void hn_rndis_receive_response (struct hn_data *hv, +const void *data,uint32_t len); +void hn_rndis_link_status (struct hn_data *hv,const void *data); +int hn_rndis_attach (struct hn_data *hv); +void hn_rndis_detach (struct hn_data *hv); +int hn_rndis_get_eaddr (struct hn_data *hv,uint8_t *eaddr); +int hn_rndis_get_linkstatus (struct hn_data *hv); +int hn_rndis_get_linkspeed (struct hn_data *hv); +int hn_rndis_set_rxfilter (struct hn_data *hv,uint32_t filter); +void hn_rndis_rx_ctrl (struct hn_data *hv,const void *data, +int dlen); +int hn_rndis_get_offload (struct hn_data *hv, +struct rte_eth_dev_info *dev_info); +int hn_rndis_conf_offload (struct hn_data *hv, +uint64_t tx_offloads, +uint64_t rx_offloads); +int hn_rndis_query_rsscaps (struct hn_data *hv, +unsigned int *rxr_cnt0); +int hn_rndis_conf_rss (struct hn_data *hv, +const struct rte_eth_rss_conf *rss_conf);
drivers/net/netvsc/hn_rxtx.c new file +1221 -0
271 lines not on this page · raw message
drivers/net/netvsc/hn_var.h new file +140 -0
140 lines not on this page · raw message
drivers/net/netvsc/ndis.h new file +378 -0
378 lines not on this page · raw message
drivers/net/netvsc/rndis.h new file +414 -0
414 lines not on this page · raw message
drivers/net/netvsc/rte_pmd_netvsc_version.map new file +5 -0
Lines of this file are not shown. View the raw message.
The rest of this diff is not shown. View the raw message.
Signature · 1 line
2.17.0
Part of the diff is not shown here. View the raw message.
PATCH v5 3/4 net/netvsc: add documentation
In reply to Stephen HemmingerFrom: Stephen Hemminger <[email protected]>
Matching documentation for new netvsc device.
--- doc/guides/nics/features/netvsc.ini | 23 ++++++ doc/guides/nics/index.rst | 1 + doc/guides/nics/netvsc.rst | 97 ++++++++++++++++++++++++++ doc/guides/rel_notes/release_18_05.rst | 5 ++ 4 files changed, 126 insertions(+) create mode 100644 doc/guides/nics/features/netvsc.ini create mode 100644 doc/guides/nics/netvsc.rst
doc/guides/nics/features/netvsc.ini new file +23 -0
@@ -0,0 +1,23 @@ +; +; Supported features of the 'netvsc' network poll mode driver. +; +; Refer to default.ini for the full list of available PMD features. +; +[Features] +Speed capabilities = P +Link status = Y +Queue start/stop = Y +Scattered Rx = Y +Promiscuous mode = Y +Allmulticast mode = Y +Basic stats = Y +Stats per queue = Y +Extended stats = Y +Multiprocess aware = Y +Other kdrv = Y +ARMv7 = Y +ARMv8 = Y +x86-32 = Y +x86-64 = Y +Usage doc = Y +MTU update = Y
doc/guides/nics/index.rst +1 -0
@@ -32,6 +32,7 @@ Network Interface Controller Drivers mlx4 mlx5 mvpp2 + netvsc nfp octeontx qede
doc/guides/nics/netvsc.rst new file +97 -0
97 lines not on this page · raw message
doc/guides/rel_notes/release_18_05.rst +5 -0
@@ -149,6 +149,11 @@ New Features stats/xstats on shared memory from secondary process, and also pdump packets on those virtual devices. +* **Added experimental support for Hyper-V netvsc PMD.** + + The new experimntal ``netvsc`` poll mode driver provides native support for + networking on Hyper-V. See the :doc:`../nics/netvsc` nic driver guide + for more details on this new driver. API Changes -----------
Signature · 1 line
2.17.0
PATCH v5 4/4 bus/vmbus and net/netvsc: add meson build support
In reply to Stephen HemmingerFrom: Stephen Hemminger <[email protected]>
Update meson build files for new netvsc and vmbus drivers.
--- config/meson.build | 7 +++++++ drivers/bus/meson.build | 2 +- drivers/bus/vmbus/meson.build | 16 ++++++++++++++++ drivers/net/meson.build | 2 +- drivers/net/netvsc/meson.build | 13 +++++++++++++ 5 files changed, 38 insertions(+), 2 deletions(-) create mode 100644 drivers/bus/vmbus/meson.build create mode 100644 drivers/net/netvsc/meson.build
config/meson.build +7 -0
@@ -49,6 +49,13 @@ if host_machine.system() == 'linux' and cc.find_library('bsd', required: false). dpdk_extra_ldflags += '-lbsd' endif +# vmbus depends on lib uuid +uuid_dep = cc.find_library('uuid', required: false) +if uuid_dep.found() and cc.has_header('uuid/uuid.h') + add_project_link_arguments('-luuid', language: 'c') + dpdk_extra_ldflags += '-luuid' +endif + # add -include rte_config to cflags add_project_arguments('-include', 'rte_config.h', language: 'c')
drivers/bus/meson.build +1 -1
@@ -1,7 +1,7 @@ # SPDX-License-Identifier: BSD-3-Clause # Copyright(c) 2017 Intel Corporation -drivers = ['dpaa', 'fslmc', 'pci', 'vdev'] +drivers = ['dpaa', 'fslmc', 'pci', 'vdev', 'vmbus'] std_deps = ['eal'] config_flag_fmt = 'RTE_LIBRTE_@0@_BUS' driver_name_fmt = 'rte_bus_@0@'
drivers/bus/vmbus/meson.build new file +16 -0
@@ -0,0 +1,16 @@ +# SPDX-License-Identifier: BSD-3-Clause + +install_headers('rte_bus_vmbus.h','rte_vmbus_reg.h') + +sources = files('vmbus_common.c', + 'vmbus_channel.c', + 'vmbus_bufring.c', + 'vmbus_common_uio.c') + +if host_machine.system() == 'linux' + sources += files('linux/vmbus_bus.c', + 'linux/vmbus_uio.c') + includes += include_directories('linux') +else + build = false +endif
drivers/net/meson.build +1 -1
@@ -3,7 +3,7 @@ drivers = ['af_packet', 'axgbe', 'bonding', 'dpaa', 'dpaa2', 'e1000', 'enic', 'fm10k', 'i40e', 'ixgbe', - 'mvpp2', 'null', 'octeontx', 'pcap', 'ring', + 'mvpp2', 'netvsc', 'null', 'octeontx', 'pcap', 'ring', 'sfc', 'thunderx', 'virtio'] std_deps = ['ethdev', 'kvargs'] # 'ethdev' also pulls in mbuf, net, eal etc std_deps += ['bus_pci'] # very many PMDs depend on PCI, so make std
drivers/net/netvsc/meson.build new file +13 -0
@@ -0,0 +1,13 @@ +# SPDX-License-Identifier: BSD-3-Clause +# Copyright(c) 2018 Microsoft Corporation + +version = 2 + +allow_experimental_apis = true + +sources = files('hn_ethdev.c', + 'hn_rxtx.c', + 'hn_rndis.c', + 'hn_nvs.c') + +deps += ['bus_vmbus' ]
Signature · 1 line
2.17.0
Hi Stephen,
I'm trying to compile your patches and I'm getting this compilation issue:
/download/dpdk/drivers/net/netvsc/hn_ethdev.c:28:27: fatal error: rte_bus_vmbus.h: No such file or directory compilation terminated.
/download/dpdk/mk/internal/rte.compile-pre.mk:114: recipe for target 'hn_ethdev.o' failed make[6]: *** [hn_ethdev.o] Error 1
make[6]: *** Waiting for unfinished jobs....
CC hn_rndis.o
Kindest regards,
Raslan Darawsheh
-----Original Message-----
From: dev [mailto:[email protected]] On Behalf Of Stephen Hemminger
Sent: Friday, April 27, 2018 1:58 AM
To: [email protected]
Cc: Stephen Hemminger <[email protected]>
Subject: [dpdk-dev] [PATCH v5 0/4] Hyper-V netvsc PMD (and VMBus)
This is a revised version of the Hyper-V native bus (VMBus) and network device (netvsc) drivers. This virtual device is used in Microsoft Hyper-V in Windows 10, Windows Server 2016 and Azure. Most of this code was extracted from FreeBSD and some of this is from earlier code donated by Brocade.
Only Linux is supported at present, but the code is split to allow future FreeBSD and Windows support.
This version works with upstream kernel (4.16) but in that mode only a single queue is supported. With additional patches that are pending for 5.0 kernel, multi-queue support works as well.
Device binding is best done via driverctl; this required some additional fixes to kernel and driverctl to work correctly. Linux kernel vmbus support needed to support sysfs driver_override and driverctl needed to handle non-PCI bus from udev.
https://emea01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgitlab.com%2Fdriverctl%2Fdriverctl%2Fmerge_requests%2F3&data=02%7C01%7Cvasilyf%40mellanox.com%7Cfef68d6edf7e48e171ab08d5abc922c8%7Ca652971c7d2e4d9ba6a4d149256f461b%7C0%7C0%7C636603802739758809&sdata=PmKpSOIJTJ2iuPG37SfdXjH8cELSJxaoYB4FM3iKyMw%3D&reserved=0
https://emea01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fdriverdev.linuxdriverproject.org%2Fpipermail%2Fdriverdev-devel%2F2018-April%2F118889.html&data=02%7C01%7Cvasilyf%40mellanox.com%7Cfef68d6edf7e48e171ab08d5abc922c8%7Ca652971c7d2e4d9ba6a4d149256f461b%7C0%7C0%7C636603802739758809&sdata=%2Fgxh5NFMja9dFdj8RCd6YTocZ0TvRBCVTgvC6hzok4M%3D&reserved=0
v5
- rebase to current 18.05
- fix message from vmbus due to race on sysfs for sub channel
v4
- don't enable by default because of uuid library dependency
- api's are internal no need to mark experimental
- add netvsc ini file
- fix MAINTAINERS entry
v3
- fix documentation to format correctly and include more info about binding
- fix build on 32 bit
- minor white space and indentation fixes
Stephen Hemminger (4):
bus/vmbus: add hyper-v virtual bus support net/netvsc: add hyper-v netvsc network device net/netvsc: add documentation
bus/vmbus and net/netvsc: add meson build support
MAINTAINERS | 11 + config/common_base | 13 + config/meson.build | 7 + doc/guides/nics/features/netvsc.ini | 23 + doc/guides/nics/index.rst | 1 + doc/guides/nics/netvsc.rst | 97 ++ doc/guides/rel_notes/release_18_05.rst | 5 + drivers/bus/Makefile | 1 + drivers/bus/meson.build | 2 +- drivers/bus/vmbus/Makefile | 36 + drivers/bus/vmbus/linux/Makefile | 3 + drivers/bus/vmbus/linux/vmbus_bus.c | 355 +++++ drivers/bus/vmbus/linux/vmbus_uio.c | 390 ++++++ drivers/bus/vmbus/meson.build | 16 + drivers/bus/vmbus/private.h | 132 ++ drivers/bus/vmbus/rte_bus_vmbus.h | 397 ++++++ drivers/bus/vmbus/rte_bus_vmbus_version.map | 28 + drivers/bus/vmbus/rte_vmbus_reg.h | 344 +++++ drivers/bus/vmbus/vmbus_bufring.c | 241 ++++ drivers/bus/vmbus/vmbus_channel.c | 405 ++++++ drivers/bus/vmbus/vmbus_common.c | 286 ++++ drivers/bus/vmbus/vmbus_common_uio.c | 232 ++++ drivers/net/Makefile | 1 + drivers/net/meson.build | 2 +- drivers/net/netvsc/Makefile | 23 + drivers/net/netvsc/hn_ethdev.c | 732 ++++++++++ drivers/net/netvsc/hn_logs.h | 35 + drivers/net/netvsc/hn_nvs.c | 533 +++++++ drivers/net/netvsc/hn_nvs.h | 243 ++++ drivers/net/netvsc/hn_rndis.c | 1101 +++++++++++++++ drivers/net/netvsc/hn_rndis.h | 26 + drivers/net/netvsc/hn_rxtx.c | 1221 +++++++++++++++++ drivers/net/netvsc/hn_var.h | 140 ++ drivers/net/netvsc/meson.build | 13 + drivers/net/netvsc/ndis.h | 378 +++++ drivers/net/netvsc/rndis.h | 414 ++++++ drivers/net/netvsc/rte_pmd_netvsc_version.map | 5 + mk/rte.app.mk | 2 + 38 files changed, 7892 insertions(+), 2 deletions(-) create mode 100644 doc/guides/nics/features/netvsc.ini create mode 100644 doc/guides/nics/netvsc.rst create mode 100644 drivers/bus/vmbus/Makefile create mode 100644 drivers/bus/vmbus/linux/Makefile create mode 100644 drivers/bus/vmbus/linux/vmbus_bus.c create mode 100644 drivers/bus/vmbus/linux/vmbus_uio.c create mode 100644 drivers/bus/vmbus/meson.build create mode 100644 drivers/bus/vmbus/private.h create mode 100644 drivers/bus/vmbus/rte_bus_vmbus.h create mode 100644 drivers/bus/vmbus/rte_bus_vmbus_version.map create mode 100644 drivers/bus/vmbus/rte_vmbus_reg.h create mode 100644 drivers/bus/vmbus/vmbus_bufring.c create mode 100644 drivers/bus/vmbus/vmbus_channel.c create mode 100644 drivers/bus/vmbus/vmbus_common.c create mode 100644 drivers/bus/vmbus/vmbus_common_uio.c create mode 100644 drivers/net/netvsc/Makefile create mode 100644 drivers/net/netvsc/hn_ethdev.c create mode 100644 drivers/net/netvsc/hn_logs.h create mode 100644 drivers/net/netvsc/hn_nvs.c create mode 100644 drivers/net/netvsc/hn_nvs.h create mode 100644 drivers/net/netvsc/hn_rndis.c create mode 100644 drivers/net/netvsc/hn_rndis.h create mode 100644 drivers/net/netvsc/hn_rxtx.c create mode 100644 drivers/net/netvsc/hn_var.h create mode 100644 drivers/net/netvsc/meson.build create mode 100644 drivers/net/netvsc/ndis.h create mode 100644 drivers/net/netvsc/rndis.h create mode 100644 drivers/net/netvsc/rte_pmd_netvsc_version.map
Signature · 1 line
2.17.0
Quoted 10 lines · On Wed, 9 May 2018 14:59:20 +0000 Raslan Darawsheh <[email protected]> wrote:
Hi Stephen,
I'm trying to compile your patches and I'm getting this compilation issue:
/download/dpdk/drivers/net/netvsc/hn_ethdev.c:28:27: fatal error:rte_bus_vmbus.h: No such file or directory compilation terminated.
/download/dpdk/mk/internal/rte.compile-pre.mk:114: recipe for target 'hn_ethdev.o' failed make[6]: *** [hn_ethdev.o] Error 1
make[6]: *** Waiting for unfinished jobs....
CC hn_rndis.o
Did you enable VMBUS in the config file?