3.18.108-stable review

@@ -515,6 +515,7 @@ int jbd2_journal_start_reserved(handle_t
 	 */
 	ret = start_this_handle(journal, handle, GFP_NOFS);
 	if (ret < 0) {
+		handle->h_journal = journal;
 		jbd2_journal_free_reserved(handle);
 		return ret;
 	}

@@ -338,20 +338,25 @@ static ext4_fsblk_t ext4_valid_block_bit
 	/* check whether block bitmap block number is set */
 	blk = ext4_block_bitmap(sb, desc);
 	offset = blk - group_first_block;
-	if (!ext4_test_bit(EXT4_B2C(sbi, offset), bh->b_data))
+	if (offset < 0 || EXT4_B2C(sbi, offset) >= sb->s_blocksize ||
+	    !ext4_test_bit(EXT4_B2C(sbi, offset), bh->b_data))
 		/* bad block bitmap */
 		return blk;
 
 	/* check whether the inode bitmap block number is set */
 	blk = ext4_inode_bitmap(sb, desc);
 	offset = blk - group_first_block;
-	if (!ext4_test_bit(EXT4_B2C(sbi, offset), bh->b_data))
+	if (offset < 0 || EXT4_B2C(sbi, offset) >= sb->s_blocksize ||
+	    !ext4_test_bit(EXT4_B2C(sbi, offset), bh->b_data))
 		/* bad block bitmap */
 		return blk;
 
 	/* check whether the inode table block number is set */
 	blk = ext4_inode_table(sb, desc);
 	offset = blk - group_first_block;
+	if (offset < 0 || EXT4_B2C(sbi, offset) >= sb->s_blocksize ||
+	    EXT4_B2C(sbi, offset + sbi->s_itb_per_group) >= sb->s_blocksize)
+		return blk;
 	next_zero_bit = ext4_find_next_zero_bit(bh->b_data,
 			EXT4_B2C(sbi, offset + EXT4_SB(sb)->s_itb_per_group),
 			EXT4_B2C(sbi, offset));

@@ -414,6 +419,7 @@ struct buffer_head *
 ext4_read_block_bitmap_nowait(struct super_block *sb, ext4_group_t block_group)
 {
 	struct ext4_group_desc *desc;
+	struct ext4_sb_info *sbi = EXT4_SB(sb);
 	struct buffer_head *bh;
 	ext4_fsblk_t bitmap_blk;
 

@@ -421,6 +427,12 @@ ext4_read_block_bitmap_nowait(struct sup
 	if (!desc)
 		return NULL;
 	bitmap_blk = ext4_block_bitmap(sb, desc);
+	if ((bitmap_blk <= le32_to_cpu(sbi->s_es->s_first_data_block)) ||
+	    (bitmap_blk >= ext4_blocks_count(sbi->s_es))) {
+		ext4_error(sb, "Invalid block bitmap block %llu in "
+			   "block_group %u", bitmap_blk, block_group);
+		return ERR_PTR(-EUCLEAN);
+	}
 	bh = sb_getblk(sb, bitmap_blk);
 	if (unlikely(!bh)) {
 		ext4_error(sb, "Cannot get buffer for block bitmap - "

@@ -84,16 +84,22 @@ static struct buffer_head *
 ext4_read_inode_bitmap(struct super_block *sb, ext4_group_t block_group)
 {
 	struct ext4_group_desc *desc;
+	struct ext4_sb_info *sbi = EXT4_SB(sb);
 	struct buffer_head *bh = NULL;
 	ext4_fsblk_t bitmap_blk;
 	struct ext4_group_info *grp;
-	struct ext4_sb_info *sbi = EXT4_SB(sb);
 
 	desc = ext4_get_group_desc(sb, block_group, NULL);
 	if (!desc)
 		return NULL;
 
 	bitmap_blk = ext4_inode_bitmap(sb, desc);
+	if ((bitmap_blk <= le32_to_cpu(sbi->s_es->s_first_data_block)) ||
+	    (bitmap_blk >= ext4_blocks_count(sbi->s_es))) {
+		ext4_error(sb, "Invalid inode bitmap blk %llu in "
+			   "block_group %u", bitmap_blk, block_group);
+		return ERR_PTR(-EUCLEAN);
+	}
 	bh = sb_getblk(sb, bitmap_blk);
 	if (unlikely(!bh)) {
 		ext4_error(sb, "Cannot read inode bitmap - "

@@ -321,6 +321,7 @@ static ext4_fsblk_t ext4_valid_block_bit
 	struct ext4_sb_info *sbi = EXT4_SB(sb);
 	ext4_grpblk_t offset;
 	ext4_grpblk_t next_zero_bit;
+	ext4_grpblk_t max_bit = EXT4_CLUSTERS_PER_GROUP(sb);
 	ext4_fsblk_t blk;
 	ext4_fsblk_t group_first_block;
 

@@ -338,7 +339,7 @@ static ext4_fsblk_t ext4_valid_block_bit
 	/* check whether block bitmap block number is set */
 	blk = ext4_block_bitmap(sb, desc);
 	offset = blk - group_first_block;
-	if (offset < 0 || EXT4_B2C(sbi, offset) >= sb->s_blocksize ||
+	if (offset < 0 || EXT4_B2C(sbi, offset) >= max_bit ||
 	    !ext4_test_bit(EXT4_B2C(sbi, offset), bh->b_data))
 		/* bad block bitmap */
 		return blk;

@@ -346,7 +347,7 @@ static ext4_fsblk_t ext4_valid_block_bit
 	/* check whether the inode bitmap block number is set */
 	blk = ext4_inode_bitmap(sb, desc);
 	offset = blk - group_first_block;
-	if (offset < 0 || EXT4_B2C(sbi, offset) >= sb->s_blocksize ||
+	if (offset < 0 || EXT4_B2C(sbi, offset) >= max_bit ||
 	    !ext4_test_bit(EXT4_B2C(sbi, offset), bh->b_data))
 		/* bad block bitmap */
 		return blk;

@@ -354,8 +355,8 @@ static ext4_fsblk_t ext4_valid_block_bit
 	/* check whether the inode table block number is set */
 	blk = ext4_inode_table(sb, desc);
 	offset = blk - group_first_block;
-	if (offset < 0 || EXT4_B2C(sbi, offset) >= sb->s_blocksize ||
-	    EXT4_B2C(sbi, offset + sbi->s_itb_per_group) >= sb->s_blocksize)
+	if (offset < 0 || EXT4_B2C(sbi, offset) >= max_bit ||
+	    EXT4_B2C(sbi, offset + sbi->s_itb_per_group) >= max_bit)
 		return blk;
 	next_zero_bit = ext4_find_next_zero_bit(bh->b_data,
 			EXT4_B2C(sbi, offset + EXT4_SB(sb)->s_itb_per_group),

@@ -201,7 +201,12 @@ static ssize_t rebind_store(struct devic
 	if (!bid)
 		return -ENODEV;
 
+	/* device_attach() callers should hold parent lock for USB */
+	if (bid->udev->dev.parent)
+		device_lock(bid->udev->dev.parent);
 	ret = device_attach(&bid->udev->dev);
+	if (bid->udev->dev.parent)
+		device_unlock(bid->udev->dev.parent);
 	if (ret < 0) {
 		dev_err(&bid->udev->dev, "rebind failed\n");
 		return ret;

@@ -248,7 +248,7 @@ enum usbip_side {
 #define	SDEV_EVENT_ERROR_SUBMIT	(USBIP_EH_SHUTDOWN | USBIP_EH_RESET)
 #define	SDEV_EVENT_ERROR_MALLOC	(USBIP_EH_SHUTDOWN | USBIP_EH_UNUSABLE)
 
-#define	VDEV_EVENT_REMOVED	(USBIP_EH_SHUTDOWN | USBIP_EH_BYE)
+#define	VDEV_EVENT_REMOVED (USBIP_EH_SHUTDOWN | USBIP_EH_RESET | USBIP_EH_BYE)
 #define	VDEV_EVENT_DOWN		(USBIP_EH_SHUTDOWN | USBIP_EH_RESET)
 #define	VDEV_EVENT_ERROR_TCP	(USBIP_EH_SHUTDOWN | USBIP_EH_RESET)
 #define	VDEV_EVENT_ERROR_MALLOC	(USBIP_EH_SHUTDOWN | USBIP_EH_UNUSABLE)

@@ -1908,7 +1908,8 @@ static int ftdi_8u2232c_probe(struct usb
 		return ftdi_jtag_probe(serial);
 
 	if (udev->product &&
-		(!strcmp(udev->product, "BeagleBone/XDS100V2") ||
+		(!strcmp(udev->product, "Arrow USB Blaster") ||
+		 !strcmp(udev->product, "BeagleBone/XDS100V2") ||
 		 !strcmp(udev->product, "SNAP Connect E10")))
 		return ftdi_jtag_probe(serial);
 

@@ -207,6 +207,7 @@ static const struct usb_device_id id_tab
 	{ USB_DEVICE(0x3195, 0xF190) }, /* Link Instruments MSO-19 */
 	{ USB_DEVICE(0x3195, 0xF280) }, /* Link Instruments MSO-28 */
 	{ USB_DEVICE(0x3195, 0xF281) }, /* Link Instruments MSO-28 */
+	{ USB_DEVICE(0x3923, 0x7A0B) }, /* National Instruments USB Serial Console */
 	{ USB_DEVICE(0x413C, 0x9500) }, /* DW700 GPS USB interface */
 	{ } /* Terminating Entry */
 };

@@ -41,6 +41,9 @@ static const struct usb_device_id usb_qu
 	{ USB_DEVICE(0x03f0, 0x0701), .driver_info =
 			USB_QUIRK_STRING_FETCH_255 },
 
+	/* HP v222w 16GB Mini USB Drive */
+	{ USB_DEVICE(0x03f0, 0x3f40), .driver_info = USB_QUIRK_DELAY_INIT },
+
 	/* Creative SB Audigy 2 NX */
 	{ USB_DEVICE(0x041e, 0x3020), .driver_info = USB_QUIRK_RESET_RESUME },
 

@@ -2289,6 +2289,7 @@ void usb_hcd_resume_root_hub (struct usb
 
 	spin_lock_irqsave (&hcd_root_hub_lock, flags);
 	if (hcd->rh_registered) {
+		pm_wakeup_event(&hcd->self.root_hub->dev, 0);
 		set_bit(HCD_FLAG_WAKEUP_PENDING, &hcd->flags);
 		queue_work(pm_wq, &hcd->wakeup_work);
 	}

@@ -633,12 +633,17 @@ void usb_wakeup_notification(struct usb_
 		unsigned int portnum)
 {
 	struct usb_hub *hub;
+	struct usb_port *port_dev;
 
 	if (!hdev)
 		return;
 
 	hub = usb_hub_to_struct_hub(hdev);
 	if (hub) {
+		port_dev = hub->ports[portnum - 1];
+		if (port_dev && port_dev->child)
+			pm_wakeup_event(&port_dev->child->dev, 0);
+
 		set_bit(portnum, hub->wakeup_bits);
 		kick_hub_wq(hub);
 	}

@@ -3363,8 +3368,11 @@ int usb_port_resume(struct usb_device *u
 
 	/* Skip the initial Clear-Suspend step for a remote wakeup */
 	status = hub_port_status(hub, port1, &portstatus, &portchange);
-	if (status == 0 && !port_is_suspended(hub, portstatus))
+	if (status == 0 && !port_is_suspended(hub, portstatus)) {
+		if (portchange & USB_PORT_STAT_C_SUSPEND)
+			pm_wakeup_event(&udev->dev, 0);
 		goto SuspendCleared;
+	}
 
 	/* see 7.1.7.7; affects power usage, but not budgeting */
 	if (hub_is_superspeed(hub->hdev))

@@ -353,8 +353,11 @@ static struct usbmix_name_map dragonfly_
 /*
  * Dell usb dock with ALC4020 codec had a firmware problem where it got
  * screwed up when zero volume is passed; just skip it as a workaround
+ *
+ * Also the extension unit gives an access error, so skip it as well.
  */
 static const struct usbmix_name_map dell_alc4020_map[] = {
+	{ 4, NULL },	/* extension unit */
 	{ 16, NULL },
 	{ 19, NULL },
 	{ 0 }

@@ -122,6 +122,9 @@ int virtio_device_freeze(struct virtio_d
 int virtio_device_restore(struct virtio_device *dev);
 #endif
 
+#define virtio_device_for_each_vq(vdev, vq) \
+	list_for_each_entry(vq, &vdev->vqs, list)
+
 /**
  * virtio_driver - operations for a virtio I/O driver
  * @driver: underlying device driver (populate name and owner).

@@ -1398,7 +1398,6 @@ static int add_port(struct ports_device
 {
 	char debugfs_name[16];
 	struct port *port;
-	struct port_buffer *buf;
 	dev_t devt;
 	unsigned int nr_added_bufs;
 	int err;

@@ -1509,8 +1508,6 @@ static int add_port(struct ports_device
 	return 0;
 
 free_inbufs:
-	while ((buf = virtqueue_detach_unused_buf(port->in_vq)))
-		free_buf(buf, true);
 free_device:
 	device_destroy(pdrvdata.class, port->dev->devt);
 free_cdev:

@@ -1535,34 +1532,14 @@ static void remove_port(struct kref *kre
 
 static void remove_port_data(struct port *port)
 {
-	struct port_buffer *buf;
-
 	spin_lock_irq(&port->inbuf_lock);
 	/* Remove unused data this port might have received. */
 	discard_port_data(port);
 	spin_unlock_irq(&port->inbuf_lock);
 
-	/* Remove buffers we queued up for the Host to send us data in. */
-	do {
-		spin_lock_irq(&port->inbuf_lock);
-		buf = virtqueue_detach_unused_buf(port->in_vq);
-		spin_unlock_irq(&port->inbuf_lock);
-		if (buf)
-			free_buf(buf, true);
-	} while (buf);
-
 	spin_lock_irq(&port->outvq_lock);
 	reclaim_consumed_buffers(port);
 	spin_unlock_irq(&port->outvq_lock);
-
-	/* Free pending buffers from the out-queue. */
-	do {
-		spin_lock_irq(&port->outvq_lock);
-		buf = virtqueue_detach_unused_buf(port->out_vq);
-		spin_unlock_irq(&port->outvq_lock);
-		if (buf)
-			free_buf(buf, true);
-	} while (buf);
 }
 
 /*

@@ -1783,13 +1760,24 @@ static void control_work_handler(struct
 	spin_unlock(&portdev->c_ivq_lock);
 }
 
+static void flush_bufs(struct virtqueue *vq, bool can_sleep)
+{
+	struct port_buffer *buf;
+	unsigned int len;
+
+	while ((buf = virtqueue_get_buf(vq, &len)))
+		free_buf(buf, can_sleep);
+}
+
 static void out_intr(struct virtqueue *vq)
 {
 	struct port *port;
 
 	port = find_port_by_vq(vq->vdev->priv, vq);
-	if (!port)
+	if (!port) {
+		flush_bufs(vq, false);
 		return;
+	}
 
 	wake_up_interruptible(&port->waitqueue);
 }

@@ -1800,8 +1788,10 @@ static void in_intr(struct virtqueue *vq
 	unsigned long flags;
 
 	port = find_port_by_vq(vq->vdev->priv, vq);
-	if (!port)
+	if (!port) {
+		flush_bufs(vq, false);
 		return;
+	}
 
 	spin_lock_irqsave(&port->inbuf_lock, flags);
 	port->inbuf = get_inbuf(port);

@@ -1976,6 +1966,15 @@ static const struct file_operations port
 
 static void remove_vqs(struct ports_device *portdev)
 {
+	struct virtqueue *vq;
+
+	virtio_device_for_each_vq(portdev->vdev, vq) {
+		struct port_buffer *buf;
+
+		flush_bufs(vq, true);
+		while ((buf = virtqueue_detach_unused_buf(vq)))
+			free_buf(buf, true);
+	}
 	portdev->vdev->config->del_vqs(portdev->vdev);
 	kfree(portdev->in_vqs);
 	kfree(portdev->out_vqs);

@@ -137,6 +137,9 @@ struct gsm_dlci {
 	struct mutex mutex;
 
 	/* Link layer */
+	int mode;
+#define DLCI_MODE_ABM		0	/* Normal Asynchronous Balanced Mode */
+#define DLCI_MODE_ADM		1	/* Asynchronous Disconnected Mode */
 	spinlock_t lock;	/* Protects the internal state */
 	struct timer_list t1;	/* Retransmit timer for SABM and UA */
 	int retries;

@@ -1380,7 +1383,13 @@ retry:
 	ctrl->data = data;
 	ctrl->len = clen;
 	gsm->pending_cmd = ctrl;
-	gsm->cretries = gsm->n2;
+
+	/* If DLCI0 is in ADM mode skip retries, it won't respond */
+	if (gsm->dlci[0]->mode == DLCI_MODE_ADM)
+		gsm->cretries = 1;
+	else
+		gsm->cretries = gsm->n2;
+
 	mod_timer(&gsm->t2_timer, jiffies + gsm->t2 * HZ / 100);
 	gsm_control_transmit(gsm, ctrl);
 	spin_unlock_irqrestore(&gsm->control_lock, flags);

@@ -1488,6 +1497,7 @@ static void gsm_dlci_t1(unsigned long da
 			if (debug & 8)
 				pr_info("DLCI %d opening in ADM mode.\n",
 					dlci->addr);
+			dlci->mode = DLCI_MODE_ADM;
 			gsm_dlci_open(dlci);
 		} else {
 			gsm_dlci_close(dlci);

@@ -2892,11 +2892,22 @@ static int gsmtty_modem_update(struct gs
 static int gsm_carrier_raised(struct tty_port *port)
 {
 	struct gsm_dlci *dlci = container_of(port, struct gsm_dlci, port);
+	struct gsm_mux *gsm = dlci->gsm;
+
 	/* Not yet open so no carrier info */
 	if (dlci->state != DLCI_OPEN)
 		return 0;
 	if (debug & 2)
 		return 1;
+
+	/*
+	 * Basic mode with control channel in ADM mode may not respond
+	 * to CMD_MSC at all and modem_rx is empty.
+	 */
+	if (gsm->encoding == 0 && gsm->dlci[0]->mode == DLCI_MODE_ADM &&
+	    !dlci->modem_rx)
+		return 1;
+
 	return dlci->modem_rx & TIOCM_CD;
 }
 

@@ -171,12 +171,11 @@ static struct tty_ldisc *tty_ldisc_get(s
 			return ERR_CAST(ldops);
 	}
 
-	ld = kmalloc(sizeof(struct tty_ldisc), GFP_KERNEL);
-	if (ld == NULL) {
-		put_ldops(ldops);
-		return ERR_PTR(-ENOMEM);
-	}
-
+	/*
+	 * There is no way to handle allocation failure of only 16 bytes.
+	 * Let's simplify error handling and save more memory.
+	 */
+	ld = kmalloc(sizeof(struct tty_ldisc), GFP_KERNEL | __GFP_NOFAIL);
 	ld->ops = ldops;
 	ld->tty = tty;
 

@@ -2695,6 +2695,7 @@ static int snd_pcm_sync_ptr(struct snd_p
 	sync_ptr.s.status.hw_ptr = status->hw_ptr;
 	sync_ptr.s.status.tstamp = status->tstamp;
 	sync_ptr.s.status.suspended_state = status->suspended_state;
+	sync_ptr.s.status.audio_tstamp = status->audio_tstamp;
 	snd_pcm_stream_unlock_irq(substream);
 	if (copy_to_user(_sync_ptr, &sync_ptr, sizeof(sync_ptr)))
 		return -EFAULT;

@@ -363,10 +363,14 @@ get_synthdev(struct seq_oss_devinfo *dp,
 		return NULL;
 	if (! dp->synths[dev].opened)
 		return NULL;
-	if (dp->synths[dev].is_midi)
-		return &midi_synth_dev;
-	if ((rec = get_sdev(dev)) == NULL)
-		return NULL;
+	if (dp->synths[dev].is_midi) {
+		rec = &midi_synth_dev;
+		snd_use_lock_use(&rec->use_lock);
+	} else {
+		rec = get_sdev(dev);
+		if (!rec)
+			return NULL;
+	}
 	if (! rec->opened) {
 		snd_use_lock_free(&rec->use_lock);
 		return NULL;

@@ -825,21 +825,25 @@ static int chip_ready (struct map_info *
 		     (mode == FL_WRITING && (cfip->SuspendCmdSupport & 1))))
 			goto sleep;
 
+		/* Do not allow suspend iff read/write to EB address */
+		if ((adr & chip->in_progress_block_mask) ==
+		    chip->in_progress_block_addr)
+			goto sleep;
 
 		/* Erase suspend */
-		map_write(map, CMD(0xB0), adr);
+		map_write(map, CMD(0xB0), chip->in_progress_block_addr);
 
 		/* If the flash has finished erasing, then 'erase suspend'
 		 * appears to make some (28F320) flash devices switch to
 		 * 'read' mode.  Make sure that we switch to 'read status'
 		 * mode so we get the right data. --rmk
 		 */
-		map_write(map, CMD(0x70), adr);
+		map_write(map, CMD(0x70), chip->in_progress_block_addr);
 		chip->oldstate = FL_ERASING;
 		chip->state = FL_ERASE_SUSPENDING;
 		chip->erase_suspended = 1;
 		for (;;) {
-			status = map_read(map, adr);
+			status = map_read(map, chip->in_progress_block_addr);
 			if (map_word_andequal(map, status, status_OK, status_OK))
 			        break;
 

@@ -1035,8 +1039,8 @@ static void put_chip(struct map_info *ma
 		   sending the 0x70 (Read Status) command to an erasing
 		   chip and expecting it to be ignored, that's what we
 		   do. */
-		map_write(map, CMD(0xd0), adr);
-		map_write(map, CMD(0x70), adr);
+		map_write(map, CMD(0xd0), chip->in_progress_block_addr);
+		map_write(map, CMD(0x70), chip->in_progress_block_addr);
 		chip->oldstate = FL_READY;
 		chip->state = FL_ERASING;
 		break;

@@ -1927,6 +1931,8 @@ static int __xipram do_erase_oneblock(st
 	map_write(map, CMD(0xD0), adr);
 	chip->state = FL_ERASING;
 	chip->erase_suspended = 0;
+	chip->in_progress_block_addr = adr;
+	chip->in_progress_block_mask = ~(len - 1);
 
 	ret = INVAL_CACHE_AND_WAIT(map, chip, adr,
 				   adr, len,

@@ -85,6 +85,7 @@ struct flchip {
 	unsigned int write_suspended:1;
 	unsigned int erase_suspended:1;
 	unsigned long in_progress_block_addr;
+	unsigned long in_progress_block_mask;
 
 	struct mutex mutex;
 	wait_queue_head_t wq; /* Wait on here when we're waiting for the chip

@@ -45,6 +45,7 @@
 #define I82802AB	0x00ad
 #define I82802AC	0x00ac
 #define PF38F4476	0x881c
+#define M28F00AP30	0x8963
 /* STMicroelectronics chips */
 #define M50LPW080       0x002F
 #define M50FLW080A	0x0080

@@ -375,6 +376,17 @@ static void cfi_fixup_major_minor(struct
 		extp->MinorVersion = '1';
 }
 
+static int cfi_is_micron_28F00AP30(struct cfi_private *cfi, struct flchip *chip)
+{
+	/*
+	 * Micron(was Numonyx) 1Gbit bottom boot are buggy w.r.t
+	 * Erase Supend for their small Erase Blocks(0x8000)
+	 */
+	if (cfi->mfr == CFI_MFR_INTEL && cfi->id == M28F00AP30)
+		return 1;
+	return 0;
+}
+
 static inline struct cfi_pri_intelext *
 read_pri_intelext(struct map_info *map, __u16 adr)
 {

@@ -830,6 +842,11 @@ static int chip_ready (struct map_info *
 		    chip->in_progress_block_addr)
 			goto sleep;
 
+		/* do not suspend small EBs, buggy Micron Chips */
+		if (cfi_is_micron_28F00AP30(cfi, chip) &&
+		    (chip->in_progress_block_mask == ~(0x8000-1)))
+			goto sleep;
+
 		/* Erase suspend */
 		map_write(map, CMD(0xB0), chip->in_progress_block_addr);
 

@@ -814,9 +814,10 @@ static int get_chip(struct map_info *map
 		    (mode == FL_WRITING && (cfip->EraseSuspend & 0x2))))
 			goto sleep;
 
-		/* We could check to see if we're trying to access the sector
-		 * that is currently being erased. However, no user will try
-		 * anything like that so we just wait for the timeout. */
+		/* Do not allow suspend iff read/write to EB address */
+		if ((adr & chip->in_progress_block_mask) ==
+		    chip->in_progress_block_addr)
+			goto sleep;
 
 		/* Erase suspend */
 		/* It's harmless to issue the Erase-Suspend and Erase-Resume

@@ -2265,6 +2266,7 @@ static int __xipram do_erase_chip(struct
 	chip->state = FL_ERASING;
 	chip->erase_suspended = 0;
 	chip->in_progress_block_addr = adr;
+	chip->in_progress_block_mask = ~(map->size - 1);
 
 	INVALIDATE_CACHE_UDELAY(map, chip,
 				adr, map->size,

@@ -2354,6 +2356,7 @@ static int __xipram do_erase_oneblock(st
 	chip->state = FL_ERASING;
 	chip->erase_suspended = 0;
 	chip->in_progress_block_addr = adr;
+	chip->in_progress_block_mask = ~(len - 1);
 
 	INVALIDATE_CACHE_UDELAY(map, chip,
 				adr, len,

@@ -234,14 +234,12 @@ static int kobject_add_internal(struct k
 
 		/* be noisy on error issues */
 		if (error == -EEXIST)
-			WARN(1, "%s failed for %s with "
-			     "-EEXIST, don't try to register things with "
-			     "the same name in the same directory.\n",
-			     __func__, kobject_name(kobj));
+			pr_err("%s failed for %s with -EEXIST, don't try to register things with the same name in the same directory.\n",
+			       __func__, kobject_name(kobj));
 		else
-			WARN(1, "%s failed for %s (error: %d parent: %s)\n",
-			     __func__, kobject_name(kobj), error,
-			     parent ? kobject_name(parent) : "'none'");
+			pr_err("%s failed for %s (error: %d parent: %s)\n",
+			       __func__, kobject_name(kobj), error,
+			       parent ? kobject_name(parent) : "'none'");
 	} else
 		kobj->state_in_sysfs = 1;
 

@@ -1848,6 +1848,8 @@ sd_spinup_disk(struct scsi_disk *sdkp)
 				break;	/* standby */
 			if (sshdr.asc == 4 && sshdr.ascq == 0xc)
 				break;	/* unavailable */
+			if (sshdr.asc == 4 && sshdr.ascq == 0x1b)
+				break;	/* sanitize in progress */
 			/*
 			 * Issue command to spin up drive when not ready
 			 */

@@ -143,6 +143,13 @@ static int fsl_esai_divisor_cal(struct s
 
 	psr = ratio <= 256 * maxfp ? ESAI_xCCR_xPSR_BYPASS : ESAI_xCCR_xPSR_DIV8;
 
+	/* Do not loop-search if PM (1 ~ 256) alone can serve the ratio */
+	if (ratio <= 256) {
+		pm = ratio;
+		fp = 1;
+		goto out;
+	}
+
 	/* Set the max fluctuation -- 0.1% of the max devisor */
 	savesub = (psr ? 1 : 8)  * 256 * maxfp / 1000;
 

@@ -2449,6 +2449,11 @@ static int try_write(struct ceph_connect
 	int ret = 1;
 
 	dout("try_write start %p state %lu\n", con, con->state);
+	if (con->state != CON_STATE_PREOPEN &&
+	    con->state != CON_STATE_CONNECTING &&
+	    con->state != CON_STATE_NEGOTIATING &&
+	    con->state != CON_STATE_OPEN)
+		return 0;
 
 more:
 	dout("try_write out_kvec_bytes %d\n", con->out_kvec_bytes);

@@ -2474,6 +2479,8 @@ more:
 	}
 
 more_kvec:
+	BUG_ON(!con->sock);
+
 	/* kvec data queued? */
 	if (con->out_skip) {
 		ret = write_partial_skip(con);

@@ -141,8 +141,6 @@ static int read_object_code(u64 addr, si
 	unsigned char buf2[BUFSZ];
 	size_t ret_len;
 	u64 objdump_addr;
-	const char *objdump_name;
-	char decomp_name[KMOD_DECOMP_LEN];
 	int ret;
 
 	pr_debug("Reading object code for memory address: %#"PRIx64"\n", addr);

@@ -204,25 +202,9 @@ static int read_object_code(u64 addr, si
 		state->done[state->done_cnt++] = al.map->start;
 	}
 
-	objdump_name = al.map->dso->long_name;
-	if (dso__needs_decompress(al.map->dso)) {
-		if (dso__decompress_kmodule_path(al.map->dso, objdump_name,
-						 decomp_name,
-						 sizeof(decomp_name)) < 0) {
-			pr_debug("decompression failed\n");
-			return -1;
-		}
-
-		objdump_name = decomp_name;
-	}
-
 	/* Read the object code using objdump */
 	objdump_addr = map__rip_2objdump(al.map, al.addr);
-	ret = read_via_objdump(objdump_name, objdump_addr, buf2, len);
-
-	if (dso__needs_decompress(al.map->dso))
-		unlink(objdump_name);
-
+	ret = read_via_objdump(al.map->dso->long_name, objdump_addr, buf2, len);
 	if (ret > 0) {
 		/*
 		 * The kernel maps are inaccurate - assume objdump is right in