drm/i915: Stash desired logical vco in a reliable place.
Subsystems (2)
Rodrigo Vivi
maintainerPATCH 1/1 drm/i915: Stash desired logical vco in a reliable place.
On intel_dp_compute_config() we calculate the needed vco for eDP on gen9 and we stash it in intel_atomic_state.cdclk.logical.vco
However few moments later on intel_modeset_checks() we fully replace entire intel_atomic_state.cdclk.logical with dev_priv->cdclk.logical fully overwriting the logical desired vco.
So, with wrong VCO value we end up with wrong desired cdclk, but also it will raise a lot of WARNs: On gen9, when we read CDCLK_CTL to verify if we configured properly the desired frequency the CD Frequency Select bits [27:26] == 10b can mean 337.5 or 308.57 MHz depending on the VCO. So if we have wrong VCO value stashed we will believe the frequency selection didn't stick and start to raise WARNs of cdclk mismatch.
[ 42.857519] [drm:intel_dump_cdclk_state [i915]] Changing CDCLK to 308571 kHz, VCO 8640000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0 [ 42.897269] cdclk state doesn't match! [ 42.901052] WARNING: CPU: 5 PID: 1116 at drivers/gpu/drm/i915/intel_cdclk.c:2084 intel_set_cdclk+0x5d/0x110 [i915] [ 42.938004] RIP: 0010:intel_set_cdclk+0x5d/0x110 [i915] [ 43.155253] WARNING: CPU: 5 PID: 1116 at drivers/gpu/drm/i915/intel_cdclk.c:2084 intel_set_cdclk+0x5d/0x110 [i915] [ 43.170277] [drm:intel_dump_cdclk_state [i915]] [hw state] 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0 [ 43.182566] [drm:intel_dump_cdclk_state [i915]] [sw state] 308571 kHz, VCO 8640000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0
--- drivers/gpu/drm/i915/intel_dp.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/gpu/drm/i915/intel_dp.c +1 -1
@@ -1946,7 +1946,7 @@ intel_dp_compute_config(struct intel_encoder *encoder,break ; } -to_intel_atomic_state (pipe_config->base.state)->cdclk.logical.vco = vco; + dev_priv->cdclk.logical.vco = vco; }if (!HAS_DDI (dev_priv))
Signature · 6 lines
2.13.6 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Patchwork
CI✗ Fi.CI.BAT: failure for drm/i915: Stash desired logical vco in a reliable place.
== Series Details ==
== Series Details ==
Series: drm/i915: Stash desired logical vco in a reliable place.
URL : https://patchwork.freedesktop.org/series/42537/
State : failure
== Summary ==
= CI Bug Log - changes from CI_DRM_4117 -> Patchwork_8864 =
== Summary - FAILURE ==
Serious unknown changes coming with Patchwork_8864 absolutely need to be verified manually.
If you think the reported changes have nothing to do with the changes introduced in Patchwork_8864, please notify your bug team to allow them to document this new failure mode, which will reduce false positives in CI.
External URL: https://patchwork.freedesktop.org/api/1.0/series/42537/revisions/1/mbox/
== Possible new issues ==
Here are the unknown changes that may have been introduced in Patchwork_8864:
=== IGT changes ===
==== Possible regressions ====
igt@kms_chamelium@dp-edid-read:
fi-kbl-7500u: PASS -> FAIL== Known issues ==
Here are the changes found in Patchwork_8864 that come from known issues:
=== IGT changes ===
==== Issues hit ====
igt@debugfs_test@read_all_entries:
fi-snb-2520m: PASS -> INCOMPLETE (fdo#103713)fdo#103713 https://bugs.freedesktop.org/show_bug.cgi?id=103713
== Participating hosts (37 -> 34) ==
Missing (3): fi-ctg-p8600 fi-ilk-m540 fi-skl-6700hq
== Build changes ==
* Linux: CI_DRM_4117 -> Patchwork_8864
CI_DRM_4117: 844dd95837ab995c37d1139d74ff55139987b437 @ git://anongit.freedesktop.org/gfx-ci/linux
IGT_4454: 5baea95fc3abaedff3feb0f96ce29b995f0e301d @ git://anongit.freedesktop.org/xorg/app/intel-gpu-tools
Patchwork_8864: 19d62881c5a3cb8b066a889d4a1d4d5f82829cc3 @ git://anongit.freedesktop.org/gfx-ci/linux
piglit_4454: d0a0bca2194a673c4d9a70a2256837c59213c64b @ git://anongit.freedesktop.org/piglit
== Linux commits ==
19d62881c5a3 drm/i915: Stash desired logical vco in a reliable place.
== Logs ==
For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_8864/issues.html
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Patchwork
CI✗ Fi.CI.BAT: failure for drm/i915: Stash desired logical vco in a reliable place.
In reply to Rodrigo Vivi== Series Details ==
== Series Details ==
Series: drm/i915: Stash desired logical vco in a reliable place.
URL : https://patchwork.freedesktop.org/series/42537/
State : failure
== Summary ==
= CI Bug Log - changes from CI_DRM_4121 -> Patchwork_8871 =
== Summary - FAILURE ==
Serious unknown changes coming with Patchwork_8871 absolutely need to be verified manually.
If you think the reported changes have nothing to do with the changes introduced in Patchwork_8871, please notify your bug team to allow them to document this new failure mode, which will reduce false positives in CI.
External URL: https://patchwork.freedesktop.org/api/1.0/series/42537/revisions/1/mbox/
== Possible new issues ==
Here are the unknown changes that may have been introduced in Patchwork_8871:
=== IGT changes ===
==== Possible regressions ====
igt@kms_frontbuffer_tracking@basic:
fi-hsw-peppy: PASS -> DMESG-FAIL== Known issues ==
Here are the changes found in Patchwork_8871 that come from known issues:
=== IGT changes ===
==== Issues hit ====
igt@kms_pipe_crc_basic@suspend-read-crc-pipe-b:
fi-ivb-3520m: PASS -> DMESG-WARN (fdo#106084)
==== Possible fixes ====
igt@kms_pipe_crc_basic@suspend-read-crc-pipe-b:
fi-snb-2520m: INCOMPLETE (fdo#103713) -> PASS
igt@kms_pipe_crc_basic@suspend-read-crc-pipe-c:
fi-ivb-3520m: DMESG-WARN (fdo#106084) -> PASS fdo#103713 https://bugs.freedesktop.org/show_bug.cgi?id=103713
fdo#106084 https://bugs.freedesktop.org/show_bug.cgi?id=106084
== Participating hosts (40 -> 35) ==
Missing (5): fi-ctg-p8600 fi-glk-j4005 fi-kbl-7560u fi-ilk-m540 fi-skl-6700hq
== Build changes ==
* Linux: CI_DRM_4121 -> Patchwork_8871
CI_DRM_4121: d4f7520d80ab83ea9053ee080df09a23463b6966 @ git://anongit.freedesktop.org/gfx-ci/linux
IGT_4456: 43761534c6482dc67b9c3d8eeecd425ef40b3c4c @ git://anongit.freedesktop.org/xorg/app/intel-gpu-tools
Patchwork_8871: 933e2d4d85cc49818ed47c556c6f6fb9553b8b25 @ git://anongit.freedesktop.org/gfx-ci/linux
piglit_4456: 30b992bdc047073e1fe99b1ac622f026618a8081 @ git://anongit.freedesktop.org/piglit
== Linux commits ==
933e2d4d85cc drm/i915: Stash desired logical vco in a reliable place.
== Logs ==
For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_8871/issues.html
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Quoted 8 lines · Rodrigo Vivi
On
intel_dp_compute_config()we calculate the needed vco for eDP on gen9 and we stash it in intel_atomic_state.cdclk.logical.vcoHowever few moments later on
intel_modeset_checks()we fully replace entire intel_atomic_state.cdclk.logical withdev_priv->cdclk.logicalfully overwriting the logical desired vco.
Hmm. Yeah, that's a problem. However we can't just overwrite the current state like you propose in the middle of the atomic check phase.
I guess what we could do is move the code from intel_dp_compute_config() into skl_modeset_calc_cdclk(). That way we wouldn't have to add new encoder hooks or anything like that. Something like this perhaps?
static int skl_dpll0_vco(struct intel_atomic_state *state)
{
vco = state->cdclk.logical.vco;
if (!vco)
vco = dev_priv->skl_preferred_vco_freq;
for_each_new_intel_crtc_in_state(state, crtc, crtc_state, i) {
if (!crtc_state->base.enable)
continue;
if (!intel_crtc_has_type(crtc_state, INTEL_OUTPUT_EDP))
continue;
<insert code from intel_dp_compute_config()>
}
return vco;
}skl_modeset_calc_cdclk()
{
...
- vco = intel_state->cdclk.logical.vco;
- if (!vco)
- vco = dev_priv->skl_preferred_vco_freq;
+ vco = skl_dpll0_vco(intel_state);
...
}Quoted 38 lines
So, with wrong VCO value we end up with wrong desired cdclk, but also it will raise a lot of WARNs: On gen9, when we read
CDCLK_CTLto verify if we configured properly the desired frequency the CD Frequency Select bits [27:26] == 10b can mean 337.5 or 308.57 MHz depending on the VCO. So if we have wrong VCO value stashed we will believe the frequency selection didn't stick and start to raise WARNs of cdclk mismatch.[ 42.857519] [drm:intel_dump_cdclk_state [i915]] Changing CDCLK to 308571 kHz, VCO 8640000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0 [ 42.897269] cdclk state doesn't match! [ 42.901052] WARNING: CPU: 5 PID: 1116 at drivers/gpu/drm/i915/intel_cdclk.c:2084 intel_set_cdclk+0x5d/0x110 [i915] [ 42.938004] RIP: 0010:intel_set_cdclk+0x5d/0x110 [i915] [ 43.155253] WARNING: CPU: 5 PID: 1116 at drivers/gpu/drm/i915/intel_cdclk.c:2084 intel_set_cdclk+0x5d/0x110 [i915] [ 43.170277] [drm:intel_dump_cdclk_state [i915]] [hw state] 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0 [ 43.182566] [drm:intel_dump_cdclk_state [i915]] [sw state] 308571 kHz, VCO 8640000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0Cc Ville Syrjälä <[email protected]>Signed-off-by Rodrigo Vivi <[email protected]>--- drivers/gpu/drm/i915/intel_dp.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)drivers/gpu/drm/i915/intel_dp.c +1
-1@@ -1946,7 +1946,7 @@ intel_dp_compute_config(struct intel_encoder *encoder,break ; } -to_intel_atomic_state (pipe_config->base.state)->cdclk.logical.vco = vco; + dev_priv->cdclk.logical.vco = vco; }if (!HAS_DDI (dev_priv))Signature · 1 line
2.13.6
Signature · 6 lines
Ville Syrjälä Intel _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Rodrigo Vivi
maintainerPATCH 1/1 drm/i915: Adjust eDP's logical vco in a reliable place.
On intel_dp_compute_config() we were calculating the needed vco for eDP on gen9 and we stashing it in intel_atomic_state.cdclk.logical.vco
However few moments later on intel_modeset_checks() we fully replace entire intel_atomic_state.cdclk.logical with dev_priv->cdclk.logical fully overwriting the logical desired vco for eDP on gen9.
So, with wrong VCO value we end up with wrong desired cdclk, but also it will raise a lot of WARNs: On gen9, when we read CDCLK_CTL to verify if we configured properly the desired frequency the CD Frequency Select bits [27:26] == 10b can mean 337.5 or 308.57 MHz depending on the VCO. So if we have wrong VCO value stashed we will believe the frequency selection didn't stick and start to raise WARNs of cdclk mismatch.
[ 42.857519] [drm:intel_dump_cdclk_state [i915]] Changing CDCLK to 308571 kHz, VCO 8640000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0 [ 42.897269] cdclk state doesn't match! [ 42.901052] WARNING: CPU: 5 PID: 1116 at drivers/gpu/drm/i915/intel_cdclk.c:2084 intel_set_cdclk+0x5d/0x110 [i915] [ 42.938004] RIP: 0010:intel_set_cdclk+0x5d/0x110 [i915] [ 43.155253] WARNING: CPU: 5 PID: 1116 at drivers/gpu/drm/i915/intel_cdclk.c:2084 intel_set_cdclk+0x5d/0x110 [i915] [ 43.170277] [drm:intel_dump_cdclk_state [i915]] [hw state] 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0 [ 43.182566] [drm:intel_dump_cdclk_state [i915]] [sw state] 308571 kHz, VCO 8640000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0
v2: Move the entire eDP's vco logical adjustment to inside
the skl_modeset_calc_cdclk as suggested by Ville.
--- drivers/gpu/drm/i915/intel_cdclk.c | 41 ++++++++++++++++++++++++++++++++++---- drivers/gpu/drm/i915/intel_dp.c | 20 ------------------- 2 files changed, 37 insertions(+), 24 deletions(-)
drivers/gpu/drm/i915/intel_cdclk.c +37 -4
@@ -2302,9 +2302,44 @@ static int bdw_modeset_calc_cdclk(struct drm_atomic_state *state)return 0 ; } +static int skl_dpll0_vco (struct intel_atomic_state *intel_state) +{ +struct drm_i915_private *dev_priv =to_i915 (intel_state->base.dev); +struct intel_crtc *crtc; +struct intel_crtc_state *crtc_state; +int vco, i; + + vco = intel_state->cdclk.logical.vco; +if (!vco) + vco = dev_priv->skl_preferred_vco_freq; + +for_each_new_intel_crtc_in_state (intel_state, crtc, crtc_state, i) { +if (!crtc_state->base.enable) +continue ; + +if (!intel_crtc_has_type (crtc_state,INTEL_OUTPUT_EDP )) +continue ; + +/* +* DPLL0 VCO may need to be adjusted to get the correct +* clock for eDP. This will affect cdclk as well. +*/ +switch (crtc_state->port_clock /2 ) { +case 108000 : +case 216000 : + vco =8640000 ; +break ; +default : + vco =8100000 ; +break ; + } + } + +return vco; +} +static int skl_modeset_calc_cdclk (struct drm_atomic_state *state) { -struct drm_i915_private *dev_priv =to_i915 (state->dev);struct intel_atomic_state *intel_state =to_intel_atomic_state (state);int min_cdclk, cdclk, vco;
@@ -2312,9 +2347,7 @@ static int skl_modeset_calc_cdclk(struct drm_atomic_state *state)if (min_cdclk <0 )return min_cdclk; - vco = intel_state->cdclk.logical.vco; -if (!vco) - vco = dev_priv->skl_preferred_vco_freq; + vco =skl_dpll0_vco (intel_state);/* * FIXME should also account for plane ratio
drivers/gpu/drm/i915/intel_dp.c +0 -20
@@ -1929,26 +1929,6 @@ intel_dp_compute_config(struct intel_encoder *encoder, reduce_m_n); } -/* -* DPLL0 VCO may need to be adjusted to get the correct -* clock for eDP. This will affect cdclk as well. -*/ -if (intel_dp_is_edp (intel_dp) &&IS_GEN9_BC (dev_priv)) { -int vco; - -switch (pipe_config->port_clock /2 ) { -case 108000 : -case 216000 : - vco =8640000 ; -break ; -default : - vco =8100000 ; -break ; - } - -to_intel_atomic_state (pipe_config->base.state)->cdclk.logical.vco = vco; - } -if (!HAS_DDI (dev_priv))intel_dp_set_clock (encoder, pipe_config);
Signature · 6 lines
2.13.6 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Re: [PATCH] drm/i915: Adjust eDP's logical vco in a reliable place.
Quoted 68 lines · Rodrigo Vivi
On
intel_dp_compute_config()we were calculating the needed vco for eDP on gen9 and we stashing it in intel_atomic_state.cdclk.logical.vcoHowever few moments later on
intel_modeset_checks()we fully replace entire intel_atomic_state.cdclk.logical withdev_priv->cdclk.logicalfully overwriting the logical desired vco for eDP on gen9.So, with wrong VCO value we end up with wrong desired cdclk, but also it will raise a lot of WARNs: On gen9, when we read
CDCLK_CTLto verify if we configured properly the desired frequency the CD Frequency Select bits [27:26] == 10b can mean 337.5 or 308.57 MHz depending on the VCO. So if we have wrong VCO value stashed we will believe the frequency selection didn't stick and start to raise WARNs of cdclk mismatch.[ 42.857519] [drm:intel_dump_cdclk_state [i915]] Changing CDCLK to 308571 kHz, VCO 8640000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0 [ 42.897269] cdclk state doesn't match! [ 42.901052] WARNING: CPU: 5 PID: 1116 at drivers/gpu/drm/i915/intel_cdclk.c:2084 intel_set_cdclk+0x5d/0x110 [i915] [ 42.938004] RIP: 0010:intel_set_cdclk+0x5d/0x110 [i915] [ 43.155253] WARNING: CPU: 5 PID: 1116 at drivers/gpu/drm/i915/intel_cdclk.c:2084 intel_set_cdclk+0x5d/0x110 [i915] [ 43.170277] [drm:intel_dump_cdclk_state [i915]] [hw state] 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0 [ 43.182566] [drm:intel_dump_cdclk_state [i915]] [sw state] 308571 kHz, VCO 8640000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0v2: Move the entire eDP's vco logical adjustment to inside
theskl_modeset_calc_cdclkas suggested by Ville.Cc Ville Syrjälä <[email protected]>Signed-off-by Rodrigo Vivi <[email protected]>--- drivers/gpu/drm/i915/intel_cdclk.c | 41 ++++++++++++++++++++++++++++++++++---- drivers/gpu/drm/i915/intel_dp.c | 20 ------------------- 2 files changed, 37 insertions(+), 24 deletions(-)drivers/gpu/drm/i915/intel_cdclk.c +25
-0@@ -2302,9 +2302,44 @@ static int bdw_modeset_calc_cdclk(struct drm_atomic_state *state)return 0 ; } +static int skl_dpll0_vco (struct intel_atomic_state *intel_state) +{ +struct drm_i915_private *dev_priv =to_i915 (intel_state->base.dev); +struct intel_crtc *crtc; +struct intel_crtc_state *crtc_state; +int vco, i; + + vco = intel_state->cdclk.logical.vco; +if (!vco) + vco = dev_priv->skl_preferred_vco_freq; + +for_each_new_intel_crtc_in_state (intel_state, crtc, crtc_state, i) { +if (!crtc_state->base.enable) +continue ; + +if (!intel_crtc_has_type (crtc_state,INTEL_OUTPUT_EDP )) +continue ; + +/* +* DPLL0 VCO may need to be adjusted to get the correct +* clock for eDP. This will affect cdclk as well. +*/ +switch (crtc_state->port_clock /2 ) { +case 108000 : +case 216000 :
drivers/gpu/drm/i915/intel_cdclk.c static int bdw_modeset_calc_cdclk(struct drm_atomic_state *state) · line 2339
Quoted 10 lines
drivers/gpu/drm/i915/intel_cdclk.c +10
-0+ vco =8640000 ; +break ; +default : + vco =8100000 ; +break ; + } + } + +return vco; +}
Yep. I think this should do the right thing. For the times when the pipe driving eDP isn't part of the atomic state we wil simply preserve the current vco setting. That means other pipes can't actually make a mess of the DPLL0 VCO while eDP depends on it.
Quoted 51 lines
drivers/gpu/drm/i915/intel_cdclk.c +2
-4+static int skl_modeset_calc_cdclk (struct drm_atomic_state *state) { -struct drm_i915_private *dev_priv =to_i915 (state->dev);struct intel_atomic_state *intel_state =to_intel_atomic_state (state);int min_cdclk, cdclk, vco;@@ -2312,9 +2347,7 @@ static int skl_modeset_calc_cdclk(struct drm_atomic_state *state)if (min_cdclk <0 )return min_cdclk; - vco = intel_state->cdclk.logical.vco; -if (!vco) - vco = dev_priv->skl_preferred_vco_freq; + vco =skl_dpll0_vco (intel_state);/* * FIXME should also account for plane ratio drivers/gpu/drm/i915/intel_dp.c +0
-20@@ -1929,26 +1929,6 @@ intel_dp_compute_config(struct intel_encoder *encoder, reduce_m_n); } -/* -* DPLL0 VCO may need to be adjusted to get the correct -* clock for eDP. This will affect cdclk as well. -*/ -if (intel_dp_is_edp (intel_dp) &&IS_GEN9_BC (dev_priv)) { -int vco; - -switch (pipe_config->port_clock /2 ) { -case 108000 : -case 216000 : - vco =8640000 ; -break ; -default : - vco =8100000 ; -break ; - } - -to_intel_atomic_state (pipe_config->base.state)->cdclk.logical.vco = vco; - } -if (!HAS_DDI (dev_priv))intel_dp_set_clock (encoder, pipe_config);Signature · 1 line
2.13.6
Signature · 6 lines
Ville Syrjälä Intel _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Rodrigo Vivi
maintainerRe: [PATCH] drm/i915: Adjust eDP's logical vco in a reliable place.
Quoted 85 lines · Ville Syrjälä
Quoted 68 lines · Rodrigo Vivi
On
intel_dp_compute_config()we were calculating the needed vco for eDP on gen9 and we stashing it in intel_atomic_state.cdclk.logical.vcoHowever few moments later on
intel_modeset_checks()we fully replace entire intel_atomic_state.cdclk.logical withdev_priv->cdclk.logicalfully overwriting the logical desired vco for eDP on gen9.So, with wrong VCO value we end up with wrong desired cdclk, but also it will raise a lot of WARNs: On gen9, when we read
CDCLK_CTLto verify if we configured properly the desired frequency the CD Frequency Select bits [27:26] == 10b can mean 337.5 or 308.57 MHz depending on the VCO. So if we have wrong VCO value stashed we will believe the frequency selection didn't stick and start to raise WARNs of cdclk mismatch.[ 42.857519] [drm:intel_dump_cdclk_state [i915]] Changing CDCLK to 308571 kHz, VCO 8640000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0 [ 42.897269] cdclk state doesn't match! [ 42.901052] WARNING: CPU: 5 PID: 1116 at drivers/gpu/drm/i915/intel_cdclk.c:2084 intel_set_cdclk+0x5d/0x110 [i915] [ 42.938004] RIP: 0010:intel_set_cdclk+0x5d/0x110 [i915] [ 43.155253] WARNING: CPU: 5 PID: 1116 at drivers/gpu/drm/i915/intel_cdclk.c:2084 intel_set_cdclk+0x5d/0x110 [i915] [ 43.170277] [drm:intel_dump_cdclk_state [i915]] [hw state] 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0 [ 43.182566] [drm:intel_dump_cdclk_state [i915]] [sw state] 308571 kHz, VCO 8640000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0v2: Move the entire eDP's vco logical adjustment to inside
theskl_modeset_calc_cdclkas suggested by Ville.Cc Ville Syrjälä <[email protected]>Signed-off-by Rodrigo Vivi <[email protected]>--- drivers/gpu/drm/i915/intel_cdclk.c | 41 ++++++++++++++++++++++++++++++++++---- drivers/gpu/drm/i915/intel_dp.c | 20 ------------------- 2 files changed, 37 insertions(+), 24 deletions(-)drivers/gpu/drm/i915/intel_cdclk.c +25
-0@@ -2302,9 +2302,44 @@ static int bdw_modeset_calc_cdclk(struct drm_atomic_state *state)return 0 ; } +static int skl_dpll0_vco (struct intel_atomic_state *intel_state) +{ +struct drm_i915_private *dev_priv =to_i915 (intel_state->base.dev); +struct intel_crtc *crtc; +struct intel_crtc_state *crtc_state; +int vco, i; + + vco = intel_state->cdclk.logical.vco; +if (!vco) + vco = dev_priv->skl_preferred_vco_freq; + +for_each_new_intel_crtc_in_state (intel_state, crtc, crtc_state, i) { +if (!crtc_state->base.enable) +continue ; + +if (!intel_crtc_has_type (crtc_state,INTEL_OUTPUT_EDP )) +continue ; + +/* +* DPLL0 VCO may need to be adjusted to get the correct +* clock for eDP. This will affect cdclk as well. +*/ +switch (crtc_state->port_clock /2 ) { +case 108000 : +case 216000 :drivers/gpu/drm/i915/intel_cdclk.c static int bdw_modeset_calc_cdclk(struct drm_atomic_state *state) · line 2339
Quoted 10 lines
drivers/gpu/drm/i915/intel_cdclk.c +10
-0+ vco =8640000 ; +break ; +default : + vco =8100000 ; +break ; + } + } + +return vco; +}Yep. I think this should do the right thing. For the times when the pipe driving eDP isn't part of the atomic state we wil simply preserve the current vco setting. That means other pipes can't actually make a mess of the DPLL0 VCO while eDP depends on it.
Quoted 1 line
Reviewed-by Ville Syrjälä <[email protected]>
Thanks for the suggestions.
So, on setting the examples of what *not* to do: I forgot to include
Fixes: and cc stable.
Luckily I remembered before pushing. So,
seems right for you?
Quoted 50 lines
Quoted 50 lines
drivers/gpu/drm/i915/intel_cdclk.c +2
-4+static int skl_modeset_calc_cdclk (struct drm_atomic_state *state) { -struct drm_i915_private *dev_priv =to_i915 (state->dev);struct intel_atomic_state *intel_state =to_intel_atomic_state (state);int min_cdclk, cdclk, vco;@@ -2312,9 +2347,7 @@ static int skl_modeset_calc_cdclk(struct drm_atomic_state *state)if (min_cdclk <0 )return min_cdclk; - vco = intel_state->cdclk.logical.vco; -if (!vco) - vco = dev_priv->skl_preferred_vco_freq; + vco =skl_dpll0_vco (intel_state);/* * FIXME should also account for plane ratio drivers/gpu/drm/i915/intel_dp.c +0
-20@@ -1929,26 +1929,6 @@ intel_dp_compute_config(struct intel_encoder *encoder, reduce_m_n); } -/* -* DPLL0 VCO may need to be adjusted to get the correct -* clock for eDP. This will affect cdclk as well. -*/ -if (intel_dp_is_edp (intel_dp) &&IS_GEN9_BC (dev_priv)) { -int vco; - -switch (pipe_config->port_clock /2 ) { -case 108000 : -case 216000 : - vco =8640000 ; -break ; -default : - vco =8100000 ; -break ; - } - -to_intel_atomic_state (pipe_config->base.state)->cdclk.logical.vco = vco; - } -if (!HAS_DDI (dev_priv))intel_dp_set_clock (encoder, pipe_config);
Quoted 6 lines
Quoted 2 lines
Signature · 1 line
2.13.6Signature · 2 lines
Ville Syrjälä Intel
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Re: [PATCH] drm/i915: Adjust eDP's logical vco in a reliable place.
Quoted 93 lines · Rodrigo Vivi
Quoted 85 lines · Ville Syrjälä
Quoted 68 lines · Rodrigo Vivi
On
intel_dp_compute_config()we were calculating the needed vco for eDP on gen9 and we stashing it in intel_atomic_state.cdclk.logical.vcoHowever few moments later on
intel_modeset_checks()we fully replace entire intel_atomic_state.cdclk.logical withdev_priv->cdclk.logicalfully overwriting the logical desired vco for eDP on gen9.So, with wrong VCO value we end up with wrong desired cdclk, but also it will raise a lot of WARNs: On gen9, when we read
CDCLK_CTLto verify if we configured properly the desired frequency the CD Frequency Select bits [27:26] == 10b can mean 337.5 or 308.57 MHz depending on the VCO. So if we have wrong VCO value stashed we will believe the frequency selection didn't stick and start to raise WARNs of cdclk mismatch.[ 42.857519] [drm:intel_dump_cdclk_state [i915]] Changing CDCLK to 308571 kHz, VCO 8640000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0 [ 42.897269] cdclk state doesn't match! [ 42.901052] WARNING: CPU: 5 PID: 1116 at drivers/gpu/drm/i915/intel_cdclk.c:2084 intel_set_cdclk+0x5d/0x110 [i915] [ 42.938004] RIP: 0010:intel_set_cdclk+0x5d/0x110 [i915] [ 43.155253] WARNING: CPU: 5 PID: 1116 at drivers/gpu/drm/i915/intel_cdclk.c:2084 intel_set_cdclk+0x5d/0x110 [i915] [ 43.170277] [drm:intel_dump_cdclk_state [i915]] [hw state] 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0 [ 43.182566] [drm:intel_dump_cdclk_state [i915]] [sw state] 308571 kHz, VCO 8640000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0v2: Move the entire eDP's vco logical adjustment to inside
theskl_modeset_calc_cdclkas suggested by Ville.Cc Ville Syrjälä <[email protected]>Signed-off-by Rodrigo Vivi <[email protected]>--- drivers/gpu/drm/i915/intel_cdclk.c | 41 ++++++++++++++++++++++++++++++++++---- drivers/gpu/drm/i915/intel_dp.c | 20 ------------------- 2 files changed, 37 insertions(+), 24 deletions(-)drivers/gpu/drm/i915/intel_cdclk.c +25
-0@@ -2302,9 +2302,44 @@ static int bdw_modeset_calc_cdclk(struct drm_atomic_state *state)return 0 ; } +static int skl_dpll0_vco (struct intel_atomic_state *intel_state) +{ +struct drm_i915_private *dev_priv =to_i915 (intel_state->base.dev); +struct intel_crtc *crtc; +struct intel_crtc_state *crtc_state; +int vco, i; + + vco = intel_state->cdclk.logical.vco; +if (!vco) + vco = dev_priv->skl_preferred_vco_freq; + +for_each_new_intel_crtc_in_state (intel_state, crtc, crtc_state, i) { +if (!crtc_state->base.enable) +continue ; + +if (!intel_crtc_has_type (crtc_state,INTEL_OUTPUT_EDP )) +continue ; + +/* +* DPLL0 VCO may need to be adjusted to get the correct +* clock for eDP. This will affect cdclk as well. +*/ +switch (crtc_state->port_clock /2 ) { +case 108000 : +case 216000 :drivers/gpu/drm/i915/intel_cdclk.c static int bdw_modeset_calc_cdclk(struct drm_atomic_state *state) · line 2339
Quoted 10 lines
drivers/gpu/drm/i915/intel_cdclk.c +10
-0+ vco =8640000 ; +break ; +default : + vco =8100000 ; +break ; + } + } + +return vco; +}Yep. I think this should do the right thing. For the times when the pipe driving eDP isn't part of the atomic state we wil simply preserve the current vco setting. That means other pipes can't actually make a mess of the DPLL0 VCO while eDP depends on it.
Quoted 1 line
Reviewed-by Ville Syrjälä <[email protected]>Thanks for the suggestions.
So, on setting the examples of what *not* to do: I forgot to include
Fixes: and cc stable.
Quoted 6 lines
Luckily I remembered before pushing. So,
Fixes bb0f4aab0e76 ("drm/i915: Track full cdclk state for the logical and actual cdclk frequencies")Cc <[email protected]> # v4.12+seems right for you?
Yeah, that looks like the one to blame.
Quoted 57 lines
Quoted 57 lines
Quoted 53 lines
drivers/gpu/drm/i915/intel_cdclk.c +2
-4+static int skl_modeset_calc_cdclk (struct drm_atomic_state *state) { -struct drm_i915_private *dev_priv =to_i915 (state->dev);struct intel_atomic_state *intel_state =to_intel_atomic_state (state);int min_cdclk, cdclk, vco;@@ -2312,9 +2347,7 @@ static int skl_modeset_calc_cdclk(struct drm_atomic_state *state)if (min_cdclk <0 )return min_cdclk; - vco = intel_state->cdclk.logical.vco; -if (!vco) - vco = dev_priv->skl_preferred_vco_freq; + vco =skl_dpll0_vco (intel_state);/* * FIXME should also account for plane ratio drivers/gpu/drm/i915/intel_dp.c +0
-20@@ -1929,26 +1929,6 @@ intel_dp_compute_config(struct intel_encoder *encoder, reduce_m_n); } -/* -* DPLL0 VCO may need to be adjusted to get the correct -* clock for eDP. This will affect cdclk as well. -*/ -if (intel_dp_is_edp (intel_dp) &&IS_GEN9_BC (dev_priv)) { -int vco; - -switch (pipe_config->port_clock /2 ) { -case 108000 : -case 216000 : - vco =8640000 ; -break ; -default : - vco =8100000 ; -break ; - } - -to_intel_atomic_state (pipe_config->base.state)->cdclk.logical.vco = vco; - } -if (!HAS_DDI (dev_priv))intel_dp_set_clock (encoder, pipe_config);Signature · 1 line
2.13.6Signature · 2 lines
Ville Syrjälä Intel
Signature · 6 lines
Ville Syrjälä Intel _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Rodrigo Vivi
maintainerRe: [PATCH] drm/i915: Adjust eDP's logical vco in a reliable place.
Quoted 94 lines · Ville Syrjälä
Quoted 93 lines · Rodrigo Vivi
Quoted 85 lines · Ville Syrjälä
Quoted 68 lines · Rodrigo Vivi
On
intel_dp_compute_config()we were calculating the needed vco for eDP on gen9 and we stashing it in intel_atomic_state.cdclk.logical.vcoHowever few moments later on
intel_modeset_checks()we fully replace entire intel_atomic_state.cdclk.logical withdev_priv->cdclk.logicalfully overwriting the logical desired vco for eDP on gen9.So, with wrong VCO value we end up with wrong desired cdclk, but also it will raise a lot of WARNs: On gen9, when we read
CDCLK_CTLto verify if we configured properly the desired frequency the CD Frequency Select bits [27:26] == 10b can mean 337.5 or 308.57 MHz depending on the VCO. So if we have wrong VCO value stashed we will believe the frequency selection didn't stick and start to raise WARNs of cdclk mismatch.[ 42.857519] [drm:intel_dump_cdclk_state [i915]] Changing CDCLK to 308571 kHz, VCO 8640000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0 [ 42.897269] cdclk state doesn't match! [ 42.901052] WARNING: CPU: 5 PID: 1116 at drivers/gpu/drm/i915/intel_cdclk.c:2084 intel_set_cdclk+0x5d/0x110 [i915] [ 42.938004] RIP: 0010:intel_set_cdclk+0x5d/0x110 [i915] [ 43.155253] WARNING: CPU: 5 PID: 1116 at drivers/gpu/drm/i915/intel_cdclk.c:2084 intel_set_cdclk+0x5d/0x110 [i915] [ 43.170277] [drm:intel_dump_cdclk_state [i915]] [hw state] 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0 [ 43.182566] [drm:intel_dump_cdclk_state [i915]] [sw state] 308571 kHz, VCO 8640000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0v2: Move the entire eDP's vco logical adjustment to inside
theskl_modeset_calc_cdclkas suggested by Ville.Cc Ville Syrjälä <[email protected]>Signed-off-by Rodrigo Vivi <[email protected]>--- drivers/gpu/drm/i915/intel_cdclk.c | 41 ++++++++++++++++++++++++++++++++++---- drivers/gpu/drm/i915/intel_dp.c | 20 ------------------- 2 files changed, 37 insertions(+), 24 deletions(-)drivers/gpu/drm/i915/intel_cdclk.c +25
-0@@ -2302,9 +2302,44 @@ static int bdw_modeset_calc_cdclk(struct drm_atomic_state *state)return 0 ; } +static int skl_dpll0_vco (struct intel_atomic_state *intel_state) +{ +struct drm_i915_private *dev_priv =to_i915 (intel_state->base.dev); +struct intel_crtc *crtc; +struct intel_crtc_state *crtc_state; +int vco, i; + + vco = intel_state->cdclk.logical.vco; +if (!vco) + vco = dev_priv->skl_preferred_vco_freq; + +for_each_new_intel_crtc_in_state (intel_state, crtc, crtc_state, i) { +if (!crtc_state->base.enable) +continue ; + +if (!intel_crtc_has_type (crtc_state,INTEL_OUTPUT_EDP )) +continue ; + +/* +* DPLL0 VCO may need to be adjusted to get the correct +* clock for eDP. This will affect cdclk as well. +*/ +switch (crtc_state->port_clock /2 ) { +case 108000 : +case 216000 :drivers/gpu/drm/i915/intel_cdclk.c static int bdw_modeset_calc_cdclk(struct drm_atomic_state *state) · line 2339
Quoted 10 lines
drivers/gpu/drm/i915/intel_cdclk.c +10
-0+ vco =8640000 ; +break ; +default : + vco =8100000 ; +break ; + } + } + +return vco; +}Yep. I think this should do the right thing. For the times when the pipe driving eDP isn't part of the atomic state we wil simply preserve the current vco setting. That means other pipes can't actually make a mess of the DPLL0 VCO while eDP depends on it.
Quoted 1 line
Reviewed-by Ville Syrjälä <[email protected]>Thanks for the suggestions.
So, on setting the examples of what *not* to do: I forgot to include
Fixes: and cc stable.
Quoted 8 lines
Quoted 6 lines
Luckily I remembered before pushing. So,
Fixes bb0f4aab0e76 ("drm/i915: Track full cdclk state for the logical and actual cdclk frequencies")Cc <[email protected]> # v4.12+seems right for you?
Yeah, that looks like the one to blame.
pushed, thanks
Quoted 52 lines
Quoted 52 lines
Quoted 52 lines
Quoted 52 lines
drivers/gpu/drm/i915/intel_cdclk.c +2
-4+static int skl_modeset_calc_cdclk (struct drm_atomic_state *state) { -struct drm_i915_private *dev_priv =to_i915 (state->dev);struct intel_atomic_state *intel_state =to_intel_atomic_state (state);int min_cdclk, cdclk, vco;@@ -2312,9 +2347,7 @@ static int skl_modeset_calc_cdclk(struct drm_atomic_state *state)if (min_cdclk <0 )return min_cdclk; - vco = intel_state->cdclk.logical.vco; -if (!vco) - vco = dev_priv->skl_preferred_vco_freq; + vco =skl_dpll0_vco (intel_state);/* * FIXME should also account for plane ratio drivers/gpu/drm/i915/intel_dp.c +0
-20@@ -1929,26 +1929,6 @@ intel_dp_compute_config(struct intel_encoder *encoder, reduce_m_n); } -/* -* DPLL0 VCO may need to be adjusted to get the correct -* clock for eDP. This will affect cdclk as well. -*/ -if (intel_dp_is_edp (intel_dp) &&IS_GEN9_BC (dev_priv)) { -int vco; - -switch (pipe_config->port_clock /2 ) { -case 108000 : -case 216000 : - vco =8640000 ; -break ; -default : - vco =8100000 ; -break ; - } - -to_intel_atomic_state (pipe_config->base.state)->cdclk.logical.vco = vco; - } -if (!HAS_DDI (dev_priv))intel_dp_set_clock (encoder, pipe_config);
Quoted 14 lines
Quoted 6 lines
Quoted 6 lines
Quoted 2 lines
Signature · 1 line
2.13.6Signature · 2 lines
Ville Syrjälä IntelSignature · 6 lines
Ville Syrjälä Intel _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Patchwork
CI✗ Fi.CI.BAT: failure for drm/i915: Stash desired logical vco in a reliable place.
In reply to Rodrigo Vivi== Series Details ==
== Series Details ==
Series: drm/i915: Stash desired logical vco in a reliable place.
URL : https://patchwork.freedesktop.org/series/42537/
State : failure
== Summary ==
= CI Bug Log - changes from CI_DRM_4121 -> Patchwork_8875 =
== Summary - FAILURE ==
Serious unknown changes coming with Patchwork_8875 absolutely need to be verified manually.
If you think the reported changes have nothing to do with the changes introduced in Patchwork_8875, please notify your bug team to allow them to document this new failure mode, which will reduce false positives in CI.
External URL: https://patchwork.freedesktop.org/api/1.0/series/42537/revisions/1/mbox/
== Possible new issues ==
Here are the unknown changes that may have been introduced in Patchwork_8875:
=== IGT changes ===
==== Possible regressions ====
igt@kms_frontbuffer_tracking@basic:
fi-hsw-peppy: PASS -> DMESG-FAIL
igt@kms_pipe_crc_basic@suspend-read-crc-pipe-b:
fi-elk-e7500: PASS -> DMESG-FAIL
==== Warnings ====
igt@gem_exec_gttfill@basic:
fi-pnv-d510: PASS -> SKIP== Known issues ==
Here are the changes found in Patchwork_8875 that come from known issues:
=== IGT changes ===
==== Issues hit ====
igt@kms_pipe_crc_basic@suspend-read-crc-pipe-b:
fi-skl-guc: PASS -> FAIL (fdo#103191)
==== Possible fixes ====
igt@gem_mmap_gtt@basic-small-bo-tiledx:
fi-gdg-551: FAIL (fdo#102575) -> PASS
igt@kms_pipe_crc_basic@suspend-read-crc-pipe-b:
fi-snb-2520m: INCOMPLETE (fdo#103713) -> PASS
igt@kms_pipe_crc_basic@suspend-read-crc-pipe-c:
fi-ivb-3520m: DMESG-WARN (fdo#106084) -> PASS fdo#102575 https://bugs.freedesktop.org/show_bug.cgi?id=102575
fdo#103191 https://bugs.freedesktop.org/show_bug.cgi?id=103191
fdo#103713 https://bugs.freedesktop.org/show_bug.cgi?id=103713
fdo#106084 https://bugs.freedesktop.org/show_bug.cgi?id=106084
== Participating hosts (40 -> 37) ==
Missing (3): fi-ctg-p8600 fi-ilk-m540 fi-skl-6700hq
== Build changes ==
* Linux: CI_DRM_4121 -> Patchwork_8875
CI_DRM_4121: d4f7520d80ab83ea9053ee080df09a23463b6966 @ git://anongit.freedesktop.org/gfx-ci/linux
IGT_4456: 43761534c6482dc67b9c3d8eeecd425ef40b3c4c @ git://anongit.freedesktop.org/xorg/app/intel-gpu-tools
Patchwork_8875: 5806758f04c585f394ed485dd592ffdf2b7e380e @ git://anongit.freedesktop.org/gfx-ci/linux
piglit_4456: 30b992bdc047073e1fe99b1ac622f026618a8081 @ git://anongit.freedesktop.org/piglit
== Linux commits ==
5806758f04c5 drm/i915: Stash desired logical vco in a reliable place.
== Logs ==
For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_8875/issues.html
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Patchwork
CI✓ Fi.CI.BAT: success for drm/i915: Stash desired logical vco in a reliable place. (rev2)
In reply to Rodrigo Vivi== Series Details ==
== Series Details ==
Series: drm/i915: Stash desired logical vco in a reliable place. (rev2)
URL : https://patchwork.freedesktop.org/series/42537/
State : success
== Summary ==
= CI Bug Log - changes from CI_DRM_4123 -> Patchwork_8878 =
== Summary - WARNING ==
Minor unknown changes coming with Patchwork_8878 need to be verified manually.
If you think the reported changes have nothing to do with the changes introduced in Patchwork_8878, please notify your bug team to allow them to document this new failure mode, which will reduce false positives in CI.
External URL: https://patchwork.freedesktop.org/api/1.0/series/42537/revisions/2/mbox/
== Possible new issues ==
Here are the unknown changes that may have been introduced in Patchwork_8878:
=== IGT changes ===
==== Warnings ====
igt@gem_exec_gttfill@basic:
fi-pnv-d510: PASS -> SKIP== Known issues ==
Here are the changes found in Patchwork_8878 that come from known issues:
=== IGT changes ===
==== Issues hit ====
igt@kms_flip@basic-flip-vs-wf_vblank:
fi-hsw-4770r: PASS -> FAIL (fdo#100368)
==== Possible fixes ====
igt@kms_chamelium@dp-edid-read:
fi-kbl-7500u: FAIL (fdo#103841) -> PASS
igt@kms_flip@basic-flip-vs-wf_vblank:
fi-cfl-s3: FAIL (fdo#100368, fdo#103928) -> PASS
igt@kms_pipe_crc_basic@suspend-read-crc-pipe-b:
fi-ivb-3520m: DMESG-WARN (fdo#106084) -> PASS fdo#100368 https://bugs.freedesktop.org/show_bug.cgi?id=100368
fdo#103841 https://bugs.freedesktop.org/show_bug.cgi?id=103841
fdo#103928 https://bugs.freedesktop.org/show_bug.cgi?id=103928
fdo#106084 https://bugs.freedesktop.org/show_bug.cgi?id=106084
== Participating hosts (40 -> 37) ==
Missing (3): fi-ctg-p8600 fi-ilk-m540 fi-skl-6700hq
== Build changes ==
* Linux: CI_DRM_4123 -> Patchwork_8878
CI_DRM_4123: cbb6a0aa933f3323a8deb331aca503b7388abc06 @ git://anongit.freedesktop.org/gfx-ci/linux
IGT_4456: 43761534c6482dc67b9c3d8eeecd425ef40b3c4c @ git://anongit.freedesktop.org/xorg/app/intel-gpu-tools
Patchwork_8878: f1f1c4d8d875ec8ac2eaa6e9034e81213965269a @ git://anongit.freedesktop.org/gfx-ci/linux
piglit_4456: 30b992bdc047073e1fe99b1ac622f026618a8081 @ git://anongit.freedesktop.org/piglit
== Linux commits ==
f1f1c4d8d875 drm/i915: Adjust eDP's logical vco in a reliable place.
== Logs ==
For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_8878/issues.html
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Patchwork
CI✓ Fi.CI.IGT: success for drm/i915: Stash desired logical vco in a reliable place. (rev2)
In reply to Rodrigo Vivi== Series Details ==
== Series Details ==
Series: drm/i915: Stash desired logical vco in a reliable place. (rev2)
URL : https://patchwork.freedesktop.org/series/42537/
State : success
== Summary ==
= CI Bug Log - changes from CI_DRM_4123_full -> Patchwork_8878_full =
== Summary - WARNING ==
Minor unknown changes coming with Patchwork_8878_full need to be verified manually.
If you think the reported changes have nothing to do with the changes introduced in Patchwork_8878_full, please notify your bug team to allow them to document this new failure mode, which will reduce false positives in CI.
External URL: https://patchwork.freedesktop.org/api/1.0/series/42537/revisions/2/mbox/
== Possible new issues ==
Here are the unknown changes that may have been introduced in Patchwork_8878_full:
=== IGT changes ===
==== Warnings ====
igt@gem_mocs_settings@mocs-rc6-bsd1:
shard-kbl: PASS -> SKIP
igt@pm_rc6_residency@rc6-accuracy:
shard-snb: PASS -> SKIP== Known issues ==
Here are the changes found in Patchwork_8878_full that come from known issues:
=== IGT changes ===
==== Issues hit ====
igt@kms_flip@absolute-wf_vblank-interruptible:
shard-glk: PASS -> FAIL (fdo#106087)
igt@kms_flip@plain-flip-fb-recreate-interruptible:
shard-glk: PASS -> FAIL (fdo#100368) +1
igt@kms_setmode@basic:
shard-hsw: PASS -> FAIL (fdo#99912)
igt@kms_sysfs_edid_timing:
shard-apl: PASS -> WARN (fdo#100047)
==== Possible fixes ====
igt@gem_exec_suspend@basic-s3:
shard-kbl: INCOMPLETE (fdo#103665) -> PASS
igt@kms_atomic_interruptible@universal-setplane-primary:
shard-kbl: DMESG-WARN (fdo#105602, fdo#103558) -> PASS +40
igt@kms_flip@dpms-vs-vblank-race-interruptible:
shard-glk: FAIL (fdo#103060) -> PASS
igt@kms_flip@flip-vs-expired-vblank:
shard-glk: FAIL (fdo#105363) -> PASS
igt@kms_flip@flip-vs-expired-vblank-interruptible:
shard-glk: FAIL (fdo#102887) -> PASS
igt@kms_flip@flip-vs-wf_vblank-interruptible:
shard-glk: FAIL (fdo#100368) -> PASS +1
igt@kms_flip@wf_vblank-ts-check-interruptible:
shard-hsw: FAIL (fdo#103928) -> PASS fdo#100047 https://bugs.freedesktop.org/show_bug.cgi?id=100047
fdo#100368 https://bugs.freedesktop.org/show_bug.cgi?id=100368
fdo#102887 https://bugs.freedesktop.org/show_bug.cgi?id=102887
fdo#103060 https://bugs.freedesktop.org/show_bug.cgi?id=103060
fdo#103558 https://bugs.freedesktop.org/show_bug.cgi?id=103558
fdo#103665 https://bugs.freedesktop.org/show_bug.cgi?id=103665
fdo#103928 https://bugs.freedesktop.org/show_bug.cgi?id=103928
fdo#105363 https://bugs.freedesktop.org/show_bug.cgi?id=105363
fdo#105602 https://bugs.freedesktop.org/show_bug.cgi?id=105602
fdo#106087 https://bugs.freedesktop.org/show_bug.cgi?id=106087
fdo#99912 https://bugs.freedesktop.org/show_bug.cgi?id=99912
== Participating hosts (7 -> 7) ==
No changes in participating hosts
== Build changes ==
* Linux: CI_DRM_4123 -> Patchwork_8878
CI_DRM_4123: cbb6a0aa933f3323a8deb331aca503b7388abc06 @ git://anongit.freedesktop.org/gfx-ci/linux
IGT_4456: 43761534c6482dc67b9c3d8eeecd425ef40b3c4c @ git://anongit.freedesktop.org/xorg/app/intel-gpu-tools
Patchwork_8878: f1f1c4d8d875ec8ac2eaa6e9034e81213965269a @ git://anongit.freedesktop.org/gfx-ci/linux
piglit_4456: 30b992bdc047073e1fe99b1ac622f026618a8081 @ git://anongit.freedesktop.org/piglit
== Logs ==
For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_8878/shards.html
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx