Install fuego_release_test dependencies on fuego
cover Install fuego_release_test dependencies on fuego
Hello, everyone.
These three patches are adding the necessary dockerfile cmds to install the dependencies for the fuego_release_test on the fuego image.
By adding these patches on top of fuego master we will be able to run fuego_release_test from within Tim's master branch and not only from Profusion's branches.
The "Return error" patch is being added to allow fuego_release_test to detect if the install script fails, reporting the failure on test logs.
Thanks
--
Guilherme
Guilherme Campos Camargo (3):
Install Fuego Release Test dependencies and add fuego-test board Return error if docker install script fails
Add CheckScreenshot fuego_release_test dependencies
Dockerfile | 51 +++++++++++++++++++ fuego-host-scripts/docker-create-container.sh | 1 + .../docker-create-usb-privileged-container.sh | 1 + fuego-ro/boards/fuego-test.board | 13 +++++ install.sh | 4 ++ 5 files changed, 70 insertions(+) create mode 100644 fuego-ro/boards/fuego-test.board
Signature · 1 line
2.17.0
PATCH 1/3 Install Fuego Release Test dependencies and add fuego-test board
A new session has been added to the Dockerfile, mainly responsible for installing the Docker binary, pexpect and seleniumHQ (that are needed for Fuego to test a new Fuego release).
Also, a fuego-test board (a simple loopback that points to localhost) has been added.
The create scripts have also been modified to allow mapping the hosts' dockerd socket into the container. By doing this we allow Fuego and the host to share the same docker daemon.
--- Dockerfile | 48 +++++++++++++++++++ fuego-host-scripts/docker-create-container.sh | 1 + .../docker-create-usb-privileged-container.sh | 1 + fuego-ro/boards/fuego-test.board | 13 +++++ 4 files changed, 63 insertions(+) create mode 100644 fuego-ro/boards/fuego-test.board
Dockerfile +48 -0
@@ -61,6 +61,54 @@ RUN echo "${JENKINS_SHA} jenkins_${JENKINS_VERSION}_all.deb" | sha1sum -c - RUN dpkg -i jenkins_${JENKINS_VERSION}_all.deb RUN rm jenkins_${JENKINS_VERSION}_all.deb + +# ============================================================================== +# Install Fuego Release Test Dependencies +# ============================================================================== + +# TODO: This session should be moved to a separate Dockerfile in the future, +# that simply extends a fuego-base image and compiles a Fuego that's capable of +# testing itself. + +# Install Dependencies +RUN apt-get update && \ + apt-get -yV install \ + apt-transport-https \ + ca-certificates \ + chromium \ + curl \ + gnupg2 \ + python3 \ + python3-pip \ + software-properties-common && \ + pip3 install \ + docker \ + pexpect \ + selenium + +# Install Docker +RUN curl -fsSL https://download.docker.com/linux/$(source /etc/os-release; \ + echo "$ID")/gpg | sudo apt-key add - && \ + add-apt-repository \ + "deb [arch=amd64] https://download.docker.com/linux/$(\ + source /etc/os-release; echo "$ID") $(lsb_release -cs) stable" && \ + apt-get update && \ + apt-get -yV install \ + docker-ce + +# Install Chrome Driver for SeleniumHQ +RUN CHROME_DRIVER_VERSION=$(curl --silent --fail \ + https://chromedriver.storage.googleapis.com/LATEST_RELEASE) && \ + curl https://chromedriver.storage.googleapis.com/$(\ + echo ${CHROME_DRIVER_VERSION})/chromedriver_linux64.zip \ + -o chrome-driver.zip && \ + unzip chrome-driver.zip -d /usr/local/bin && rm chrome-driver.zip && \ + chmod +x /usr/local/bin/chromedriver + +# Setting jenkins as a sudoer. Needed for accessing the dockerd socket. +RUN echo "jenkins ALL = (root) NOPASSWD:ALL" >> /etc/sudoers + + # ============================================================================== # get ttc script and helpers # ==============================================================================
fuego-host-scripts/docker-create-container.sh +1 -0
@@ -18,6 +18,7 @@ if [ ! -d $DIR/../../fuego-core ]; then fi sudo docker create -it --name ${DOCKERCONTAINER} \ + -v /var/run/docker.sock:/var/run/docker.sock \ -v /boot:/boot:ro \ -v $DIR/../fuego-rw:/fuego-rw \ -v $DIR/../fuego-ro:/fuego-ro:ro \
fuego-host-scripts/docker-create-usb-privileged-container.sh +1 -0
@@ -19,6 +19,7 @@ fi sudo docker create -it --name ${DOCKERCONTAINER} \ --privileged \ + -v /var/run/docker.sock:/var/run/docker.sock \ -v /boot:/boot:ro \ -v /dev/bus/usb:/dev/bus/usb \ -v /dev/ttyACM0:/dev/ttyACM0 \
fuego-ro/boards/fuego-test.board new file +13 -0
@@ -0,0 +1,13 @@ +inherit "base-board" +include "base-params" + +IPADDR=127.0.0.1 +SRV_IP=127.0.0.1 +#LOGIN="root" +#PASSWORD="root" +#SSH_KEY="path/to/id_rsa" +BOARD_TESTDIR="$FUEGO_RW/tests" +PLATFORM="x86_64" +TRANSPORT="local" +ARCHITECTURE="x86_64" +DISTRIB="nosyslogd.dist"
Signature · 1 line
2.17.0
[email protected]
AppliedRe: [Fuego] [PATCH 1/3] Install Fuego Release Test dependencies and add fuego-test board
I've applied and pushed these patches to my master branch.
But please see the feedback below.
Quoted 51 lines
-----Original Message-----
From: Guilherme Campos CamargoA new session has been added to the Dockerfile, mainly responsible for installing the Docker binary, pexpect and seleniumHQ (that are needed for Fuego to test a new Fuego release).
Also, a fuego-test board (a simple loopback that points to localhost) has been added.
The create scripts have also been modified to allow mapping the hosts' dockerd socket into the container. By doing this we allow Fuego and the host to share the same docker daemon.
--- Dockerfile | 48 +++++++++++++++++++ fuego-host-scripts/docker-create-container.sh | 1 + .../docker-create-usb-privileged-container.sh | 1 + fuego-ro/boards/fuego-test.board | 13 +++++ 4 files changed, 63 insertions(+) create mode 100644 fuego-ro/boards/fuego-test.boardDockerfile +0
-0@@ -61,6 +61,54 @@ RUN echo "${JENKINS_SHA}jenkins_${JENKINS_VERSION}_all.deb" | sha1sum -c -
RUN dpkg -i jenkins_${JENKINS_VERSION}_all.deb RUN rm jenkins_${JENKINS_VERSION}_all.debDockerfile +2
-0+ +#==========================================================
====================Dockerfile +2
-0+# Install Fuego Release Test Dependencies +#==========================================================
====================Dockerfile +2
-0+ +# TODO: This session should be moved to a separate Dockerfile in thefuture,
+# that simply extends a fuego-base image and compiles a Fuego that's capable ofDockerfile +8
-0+# testing itself. + +# Install Dependencies +RUN apt-get update && \ + apt-get -yV install \ + apt-transport-https \ + ca-certificates \ + chromium \
Dockerfile RUN echo "${JENKINS_SHA} jenkins_${JENKINS_VERSION}_all.deb" | sha1sum -c - · line 88
Quoted 10 lines
Dockerfile +10
-0+ curl \ + gnupg2 \ + python3 \ + python3-pip \ + software-properties-common && \ + pip3 install \ + docker \ + pexpect \ + selenium +
I'm getting the following error messages when running that line:
[91mdebconf: unable to initialize frontend: Dialog
debconf: (TERM is not set, so the dialog frontend is not usable.)
debconf: falling back to frontend: Readline
[0m [91mdebconf: unable to initialize frontend: Readline
debconf: (This frontend requires a controlling tty.)
debconf: falling back to frontend: Teletype
[0m [91mdpkg-preconfigure: unable to re-open stdin:
I believe this is due to a missing DEBIAN_FRONTEND=noninteractive. But I tried to fiddle with this and figure out where to put it, and didn't have any luck getting rid of the message. The apt-get install appears to work non-interactively, but it would be nice to get rid of the message.
Dockerfile RUN echo "${JENKINS_SHA} jenkins_${JENKINS_VERSION}_all.deb" | sha1sum -c - · line 98
Quoted 11 lines
Dockerfile +2
-0+# Install Docker +RUN curl -fsSL https://download.docker.com/linux/$(source /etc/os-release; \
Dockerfile +8
-0+ echo "$ID")/gpg | sudo apt-key add - && \ + add-apt-repository \ + "deb [arch=amd64] https://download.docker.com/linux/$(\ + source /etc/os-release; echo "$ID") $(lsb_release -cs) stable" && \ + apt-get update && \ + apt-get -yV install \ + docker-ce +
Same problem here. somewhere during this line I get the messages about Debian frontend issues.
Can you try to fix this?
Thanks,
-- Tim
Quoted 73 lines
Dockerfile +13
-0+# Install Chrome Driver for SeleniumHQ +RUN CHROME_DRIVER_VERSION=$(curl --silent --fail \ + https://chromedriver.storage.googleapis.com/LATEST_RELEASE) && \ + curl https://chromedriver.storage.googleapis.com/$(\ + echo ${CHROME_DRIVER_VERSION})/chromedriver_linux64.zip \ + -o chrome-driver.zip && \ + unzip chrome-driver.zip -d /usr/local/bin && rm chrome-driver.zip && \ + chmod +x /usr/local/bin/chromedriver + +# Setting jenkins as a sudoer. Needed for accessing the dockerd socket. +RUN echo "jenkins ALL = (root) NOPASSWD:ALL" >> /etc/sudoers + + #==========================================================
====================# get ttc script and helpers # ========================================================== ====================fuego-host- renamed from fuego-host-scripts/docker-create-container.sh +0
-0
scripts/docker-create-container.sh
index 20f4b59..59cce3d 100755fuego-host-scripts/docker-create-container.sh +1
-0@@ -18,6 +18,7 @@ if [ ! -d $DIR/../../fuego-core ]; then fi sudo docker create -it --name ${DOCKERCONTAINER} \ + -v /var/run/docker.sock:/var/run/docker.sock \ -v /boot:/boot:ro \ -v $DIR/../fuego-rw:/fuego-rw \ -v $DIR/../fuego-ro:/fuego-ro:ro \fuego-host-scripts/docker-create-usb-privileged-container.sh +1
-0@@ -19,6 +19,7 @@ fi sudo docker create -it --name ${DOCKERCONTAINER} \ --privileged \ + -v /var/run/docker.sock:/var/run/docker.sock \ -v /boot:/boot:ro \ -v /dev/bus/usb:/dev/bus/usb \ -v /dev/ttyACM0:/dev/ttyACM0 \fuego-ro/boards/fuego- renamed from fuego-ro/boards/fuego-test.board +0
-0test.board
new file mode 100644
index 0000000..185e0b4fuego-ro/boards/fuego-test.board new file +13
-1@@ -0,0 +1,13 @@ +inherit "base-board" +include "base-params" + +IPADDR=127.0.0.1 +SRV_IP=127.0.0.1 +#LOGIN="root" +#PASSWORD="root" +#SSH_KEY="path/to/id_rsa" +BOARD_TESTDIR="$FUEGO_RW/tests" +PLATFORM="x86_64" +TRANSPORT="local" +ARCHITECTURE="x86_64" +DISTRIB="nosyslogd.dist" --2.17.0
_______________________________________________
Fuego mailing list
[email protected]
https://lists.linuxfoundation.org/mailman/listinfo/fuego
Re: [Fuego] [PATCH 1/3] Install Fuego Release Test dependencies and add fuego-test board
Hello, Tim. Sure. We could set DEBIAN_FRONTEND=noninteractive to avoid those warnings.
I'll submit a patch fixing that by setting a global ARG DEBIAN_FRONTEND=noninteractive -
cleaning up all DEBIAN_FRONTEND= that already exist.
This seems to be the cleanest approach.
Quoted 179 lines · On Fri, May 4, 2018 at 5:20 PM, <[email protected]> wrote:
I've applied and pushed these patches to my master branch.
But please see the feedback below.
Quoted 51 lines
-----Original Message-----
From: Guilherme Campos CamargoA new session has been added to the Dockerfile, mainly responsible for installing the Docker binary, pexpect and seleniumHQ (that are needed for Fuego to test a new Fuego release).
Also, a fuego-test board (a simple loopback that points to localhost) has been added.
The create scripts have also been modified to allow mapping the hosts' dockerd socket into the container. By doing this we allow Fuego and the host to share the same docker daemon.
--- Dockerfile | 48 +++++++++++++++++++ fuego-host-scripts/docker-create-container.sh | 1 + .../docker-create-usb-privileged-container.sh | 1 + fuego-ro/boards/fuego-test.board | 13 +++++ 4 files changed, 63 insertions(+) create mode 100644 fuego-ro/boards/fuego-test.boardDockerfile +0
-0@@ -61,6 +61,54 @@ RUN echo "${JENKINS_SHA}jenkins_${JENKINS_VERSION}_all.deb" | sha1sum -c -
RUN dpkg -i jenkins_${JENKINS_VERSION}_all.deb RUN rm jenkins_${JENKINS_VERSION}_all.debDockerfile +2
-0+ +#==========================================================
====================Dockerfile +2
-0+# Install Fuego Release Test Dependencies +#==========================================================
====================Dockerfile +2
-0+ +# TODO: This session should be moved to a separate Dockerfile in thefuture,
+# that simply extends a fuego-base image and compiles a Fuego that's capable ofDockerfile +8
-0+# testing itself. + +# Install Dependencies +RUN apt-get update && \ + apt-get -yV install \ + apt-transport-https \ + ca-certificates \ + chromium \Dockerfile RUN echo "${JENKINS_SHA} jenkins_${JENKINS_VERSION}_all.deb" | sha1sum -c - · line 88
Quoted 10 lines
Dockerfile +10
-0+ curl \ + gnupg2 \ + python3 \ + python3-pip \ + software-properties-common && \ + pip3 install \ + docker \ + pexpect \ + selenium +I'm getting the following error messages when running that line:
[91mdebconf: unable to initialize frontend: Dialog
debconf: (TERM is not set, so the dialog frontend is not usable.)
debconf: falling back to frontend: Readline
[0m [91mdebconf: unable to initialize frontend: Readline
debconf: (This frontend requires a controlling tty.)
debconf: falling back to frontend: Teletype
[0m [91mdpkg-preconfigure: unable to re-open stdin:I believe this is due to a missing DEBIAN_FRONTEND=noninteractive. But I tried to fiddle with this and figure out where to put it, and didn't have any luck getting rid of the message. The apt-get install appears to work non-interactively, but it would be nice to get rid of the message.
Dockerfile RUN echo "${JENKINS_SHA} jenkins_${JENKINS_VERSION}_all.deb" | sha1sum -c -
Quoted 7 lines
Dockerfile +2
-0+# Install Docker +RUN curl -fsSL https://download.docker.com/linux/$(source /etc/os-release; \
Dockerfile +4
-0+ echo "$ID")/gpg | sudo apt-key add - && \ + add-apt-repository \ + "deb [arch=amd64] https://download.docker.com/linux/$(\ + source /etc/os-release; echo "$ID") $(lsb_release -cs)stable" && \
Dockerfile RUN echo "${JENKINS_SHA} jenkins_${JENKINS_VERSION}_all.deb" | sha1sum -c - · line 98
Quoted 4 lines
Dockerfile +4
-0+ apt-get update && \ + apt-get -yV install \ + docker-ce +Same problem here. somewhere during this line I get the messages about Debian frontend issues.
Can you try to fix this?
Thanks,
-- TimDockerfile RUN echo "${JENKINS_SHA} jenkins_${JENKINS_VERSION}_all.deb" | sha1sum -c -
Quoted 3 lines
Dockerfile +3
-0+# Install Chrome Driver for SeleniumHQ +RUN CHROME_DRIVER_VERSION=$(curl --silent --fail \ + https://chromedriver.storage.googleapis.com/LATEST_RELEASE) &&\
Dockerfile RUN echo "${JENKINS_SHA} jenkins_${JENKINS_VERSION}_all.deb" | sha1sum -c -
Quoted 4 lines
Dockerfile +4
-0+ curl https://chromedriver.storage.googleapis.com/$(\ + echo ${CHROME_DRIVER_VERSION})/chromedriver_linux64.zip \ + -o chrome-driver.zip && \ + unzip chrome-driver.zip -d /usr/local/bin && rm chrome-driver.zip&& \
Review
Quoted 27 lines
Dockerfile +6
-0+ chmod +x /usr/local/bin/chromedriver + +# Setting jenkins as a sudoer. Needed for accessing the dockerd socket. +RUN echo "jenkins ALL = (root) NOPASSWD:ALL" >> /etc/sudoers + + #==========================================================
====================# get ttc script and helpers # ========================================================== ====================fuego-host- renamed from fuego-host-scripts/docker-create-container.sh +0
-0
scripts/docker-create-container.sh
index 20f4b59..59cce3d 100755fuego-host-scripts/docker-create-container.sh +1
-0@@ -18,6 +18,7 @@ if [ ! -d $DIR/../../fuego-core ]; then fi sudo docker create -it --name ${DOCKERCONTAINER} \ + -v /var/run/docker.sock:/var/run/docker.sock \ -v /boot:/boot:ro \ -v $DIR/../fuego-rw:/fuego-rw \ -v $DIR/../fuego-ro:/fuego-ro:ro \(quoted diff) +0
-0sh
Quoted 39 lines
b/fuego-host-scripts/docker-create-usb-privileged-container.shindex b3a55c4..b4c7f5b 100755fuego-host-scripts/docker-create-usb-privileged-container.sh +1
-0@@ -19,6 +19,7 @@ fi sudo docker create -it --name ${DOCKERCONTAINER} \ --privileged \ + -v /var/run/docker.sock:/var/run/docker.sock \ -v /boot:/boot:ro \ -v /dev/bus/usb:/dev/bus/usb \ -v /dev/ttyACM0:/dev/ttyACM0 \fuego-ro/boards/fuego- renamed from fuego-ro/boards/fuego-test.board +0
-0test.board
new file mode 100644
index 0000000..185e0b4fuego-ro/boards/fuego-test.board new file +13
-1@@ -0,0 +1,13 @@ +inherit "base-board" +include "base-params" + +IPADDR=127.0.0.1 +SRV_IP=127.0.0.1 +#LOGIN="root" +#PASSWORD="root" +#SSH_KEY="path/to/id_rsa" +BOARD_TESTDIR="$FUEGO_RW/tests" +PLATFORM="x86_64" +TRANSPORT="local" +ARCHITECTURE="x86_64" +DISTRIB="nosyslogd.dist" --2.17.0
_______________________________________________
Fuego mailing list
[email protected]
https://lists.linuxfoundation.org/mailman/listinfo/fuego
Re: [Fuego] [PATCH 1/3] Install Fuego Release Test dependencies and add fuego-test board
Quoted 7 lines
-----Original Message-----
From: Guilherme Camargo
Hello, Tim. Sure. We could set DEBIAN_FRONTEND=noninteractive to avoid those warnings.
Quoted 5 lines
I'll submit a patch fixing that by setting a global ARG DEBIAN_FRONTEND=noninteractive -
cleaning up all DEBIAN_FRONTEND= that already exist.This seems to be the cleanest approach.
Sounds good. Thanks!
-- Tim
Quoted 211 lines
On Fri, May 4, 2018 at 5:20 PM, <[email protected] <mailto:[email protected]> > wrote:
I've applied and pushed these patches to my master branch.
But please see the feedback below.
> -----Original Message-----
> From: Guilherme Campos Camargo
>
> A new session has been added to the Dockerfile, mainly
responsible for
> installing the Docker binary, pexpect and seleniumHQ (that are
needed
> for Fuego to test a new Fuego release).
>
> Also, a fuego-test board (a simple loopback that points to localhost) > has been added.
>
> The create scripts have also been modified to allow mapping the
hosts'
> dockerd socket into the container. By doing this we allow Fuego
and the> host to share the same docker daemon. > --- > Dockerfile | 48 +++++++++++++++++++ > fuego-host-scripts/docker-create-container.sh | 1 + > .../docker-create-usb-privileged-container.sh | 1 + > fuego-ro/boards/fuego-test.board | 13 +++++ > 4 files changed, 63 insertions(+) > create mode 100644 fuego-ro/boards/fuego-test.board > > diff --git a/Dockerfile b/Dockerfile > index cc995d6..f148cf7 100644 > --- a/Dockerfile > +++ b/Dockerfile > @@ -61,6 +61,54 @@ RUN echo "${JENKINS_SHA} > jenkins_${JENKINS_VERSION}_all.deb" | sha1sum -c - > RUN dpkg -i jenkins_${JENKINS_VERSION}_all.deb > RUN rm jenkins_${JENKINS_VERSION}_all.deb > > + > +# > ========================================================== > ==================== > +# Install Fuego Release Test Dependencies > +# > ========================================================== > ==================== > + > +# TODO: This session should be moved to a separate Dockerfile inthe
> future,
> +# that simply extends a fuego-base image and compiles a Fuego
that's> capable of > +# testing itself. > + > +# Install Dependencies > +RUN apt-get update && \ > + apt-get -yV install \ > + apt-transport-https \ > + ca-certificates \ > + chromium \ > + curl \ > + gnupg2 \ > + python3 \ > + python3-pip \ > + software-properties-common && \ > + pip3 install \ > + docker \ > + pexpect \ > + selenium > + I'm getting the following error messages when running that line: [91mdebconf: unable to initialize frontend: Dialog debconf: (TERM is not set, so the dialog frontend is not usable.) debconf: falling back to frontend: Readline [0m [91mdebconf: unable to initialize frontend: Readline debconf: (This frontend requires a controlling tty.) debconf: falling back to frontend: Teletype [0m [91mdpkg-preconfigure: unable to re-open stdin: I believe this is due to a missing DEBIAN_FRONTEND=noninteractive. But I tried to fiddle with this and figure out where to put it, and didn't have any luck getting rid of the message. The apt-getinstall
appears to work non-interactively, but it would be nice to get rid of the message.> +# Install Docker
> +RUN curl -fsSL https://download.docker.com/linux/$(source
<https://download.docker.com/linux/$(source>/etc/os-> release; \ > + echo "$ID")/gpg | sudo apt-key add - && \ > + add-apt-repository \ > + "deb [arch=amd64] https://download.docker.com/linux/$(\ <https://download.docker.com/linux/$(%5C> > + source /etc/os-release; echo "$ID") $(lsb_release -cs) stable" && \ > + apt-get update && \ > + apt-get -yV install \ > + docker-ce > + Same problem here. somewhere during this line I get the messages about Debian frontend issues. Can you try to fix this? Thanks, -- Tim > +# Install Chrome Driver for SeleniumHQ > +RUN CHROME_DRIVER_VERSION=$(curl --silent --fail \ > + https://chromedriver.storage.googleapis.com/LATEST_RELEASE <https://chromedriver.storage.googleapis.com/LATEST_RELEASE> ) && \ > + curl https://chromedriver.storage.googleapis.com/$(\ <https://chromedriver.storage.googleapis.com/$(%5C> > + echo ${CHROME_DRIVER_VERSION})/chromedriver_linux64.zip \ > + -o chrome-driver.zip && \ > + unzip chrome-driver.zip -d /usr/local/bin && rm chrome-driver.zip && \
> + chmod +x/usr/local/bin/chromedriver
> +
> +# Setting jenkins as a sudoer. Needed for accessing the dockerd
socket.> +RUN echo "jenkins ALL = (root) NOPASSWD:ALL" >> /etc/sudoers > + > + > # > ========================================================== > ==================== > # get ttc script and helpers > # > ========================================================== > ==================== > diff --git a/fuego-host-scripts/docker-create-container.sh b/fuego- host- > scripts/docker-create-container.sh > index 20f4b59..59cce3d 100755 > --- a/fuego-host-scripts/docker-create-container.sh > +++ b/fuego-host-scripts/docker-create-container.sh > @@ -18,6 +18,7 @@ if [ ! -d $DIR/../../fuego-core ]; then > fi > > sudo docker create -it --name ${DOCKERCONTAINER} \ > + -v /var/run/docker.sock:/var/run/docker.sock \ > -v /boot:/boot:ro \ > -v $DIR/../fuego-rw:/fuego-rw \ > -v $DIR/../fuego-ro:/fuego-ro:ro \ > diff --git a/fuego-host-scripts/docker-create-usb-privileged-
container.sh
>b/fuego-host-scripts/docker-create-usb-privileged-container.sh> index b3a55c4..b4c7f5b 100755
> ---a/fuego-host-scripts/docker-create-usb-privileged-container.sh> +++ b/fuego-host-scripts/docker-create-usb-privileged-container.sh> @@ -19,6 +19,7 @@ fi > > sudo docker create -it --name ${DOCKERCONTAINER} \ > --privileged \ > + -v /var/run/docker.sock:/var/run/docker.sock \ > -v /boot:/boot:ro \ > -v /dev/bus/usb:/dev/bus/usb \ > -v /dev/ttyACM0:/dev/ttyACM0 \ > diff --git a/fuego-ro/boards/fuego-test.board b/fuego- ro/boards/fuego- > test.board > new file mode 100644 > index 0000000..185e0b4 > --- /dev/null > +++ b/fuego-ro/boards/fuego-test.board > @@ -0,0 +1,13 @@ > +inherit "base-board" > +include "base-params" > + > +IPADDR=127.0.0.1 > +SRV_IP=127.0.0.1 > +#LOGIN="root" > +#PASSWORD="root" > +#SSH_KEY="path/to/id_rsa" > +BOARD_TESTDIR="$FUEGO_RW/tests" > +PLATFORM="x86_64" > +TRANSPORT="local" > +ARCHITECTURE="x86_64" > +DISTRIB="nosyslogd.dist" > -- > 2.17.0 > > _______________________________________________ > Fuego mailing list > [email protected]<mailto:[email protected]>
> https://lists.linuxfoundation.org/mailman/listinfo/fuego
<https://lists.linuxfoundation.org/mailman/listinfo/fuego>
PATCH 2/3 Return error if docker install script fails
In reply to Guilherme Campos CamargoBefore this patch, install.sh would return 0 even if fuego-host-scripts/docker-build-image.sh (that's sourced in it) failed, what could possibly mislead a script or program that depends on its return.
By using 'set -e' we make sure that any failure inside its sourced scripts is propagated, aborting the execution and returning the proper error code.
--- install.sh | 4 ++++ 1 file changed, 4 insertions(+)
install.sh +4 -0
@@ -1,2 +1,6 @@ +#!/bin/bash + +set -e + source fuego-host-scripts/docker-build-image.sh $1 sudo /bin/sh -c "if [ -f /etc/ttc.conf -a ! -f fuego-ro/conf/ttc.conf ] ; then cp /etc/ttc.conf fuego-ro/conf/ttc.conf ; fi"
Signature · 1 line
2.17.0
Re: [Fuego] [PATCH 2/3] Return error if docker install script fails
Applied and pushed.
thanks.
-- Tim
Quoted 41 lines
-----Original Message-----
From: [email protected] [mailto:fuego- [email protected]] On Behalf Of Guilherme Campos Camargo
Sent: Wednesday, May 02, 2018 2:27 PM
To: [email protected]
Subject: [Fuego] [PATCH 2/3] Return error if docker install script failsBefore this patch,
install.shwould return 0 even iffuego-host-scripts/docker-build-image.sh(that's sourced in it) failed, what could possibly mislead a script or program that depends on its return.By using 'set -e' we make sure that any failure inside its sourced scripts is propagated, aborting the execution and returning the proper error code.
Signed-off-by Guilherme Campos Camargo <[email protected]>--- install.sh | 4 ++++ 1 file changed, 4 insertions(+)install.sh +4
-0@@ -1,2 +1,6 @@ +#!/bin/bash + +set -e + source fuego-host-scripts/docker-build-image.sh $1 sudo /bin/sh -c "if [ -f /etc/ttc.conf -a ! -f fuego-ro/conf/ttc.conf ] ; then cp
/etc/ttc.conffuego-ro/conf/ttc.conf; fi"
--
2.17.0_______________________________________________
Fuego mailing list
[email protected]
https://lists.linuxfoundation.org/mailman/listinfo/fuego
PATCH 3/3 Add CheckScreenshot fuego_release_test dependencies
In reply to Guilherme Campos CamargoA new class of tests has been included in fuego_release_test. The purpose of this new class is to compare screenshots.
This patch adds the newly required dependencies: imagemagick and python-pillow, that are used by CheckScreenshot.
--- Dockerfile | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-)
Dockerfile +4 -1
@@ -78,10 +78,13 @@ RUN apt-get update && \ chromium \ curl \ gnupg2 \ + imagemagick \ python3 \ python3-pip \ + python3-pillow \ software-properties-common && \ - pip3 install \ + rm -rf /var/lib/apt/lists/* && \ + python3 -m pip install \ docker \ pexpect \ selenium
Signature · 1 line
2.17.0
Re: [Fuego] [PATCH 3/3] Add CheckScreenshot fuego_release_test dependencies
Quoted 20 lines
-----Original Message-----
From: Guilherme Campos Camargo
A new class of tests has been included infuego_release_test. The purpose of this new class is to compare screenshots.This patch adds the newly required dependencies: imagemagick and python-pillow, that are used by CheckScreenshot.
Signed-off-by Guilherme Campos Camargo <[email protected]>--- Dockerfile | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-)Dockerfile +0
-0
Dockerfile RUN apt-get update && \ · line 86
Quoted 10 lines
Dockerfile +3
-1@@ -78,10 +78,13 @@ RUN apt-get update && \ chromium \ curl \ gnupg2 \ + imagemagick \ python3 \ python3-pip \ + python3-pillow \ software-properties-common && \ - pip3 install \ + rm -rf /var/lib/apt/lists/* && \
This line kind of scares me. What is this doing, and why?
Quoted 6 lines
Dockerfile +1
-1+ python3 -m pip install \ docker \ pexpect \ selenium --2.17.0
Applied and pushed.
I'm testing it at the moment, and may have further feedback depending on results.
Thanks.
-- Tim
Re: [Fuego] [PATCH 3/3] Add CheckScreenshot fuego_release_test dependencies
Quoted 25 lines · On Fri, May 4, 2018 at 5:22 PM, <[email protected]> wrote:
Quoted 25 lines
-----Original Message-----
From: Guilherme Campos Camargo
A new class of tests has been included infuego_release_test. The purpose of this new class is to compare screenshots.This patch adds the newly required dependencies: imagemagick and python-pillow, that are used by CheckScreenshot.
Signed-off-by Guilherme Campos Camargo <[email protected]>--- Dockerfile | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-)Dockerfile +1
-0@@ -78,10 +78,13 @@ RUN apt-get update && \ chromium \ curl \ gnupg2 \ + imagemagick \
Quoted 8 lines
Dockerfile RUN apt-get update && \ · line 86
Quoted 6 lines
Dockerfile +2
-1python3 \ python3-pip \ + python3-pillow \ software-properties-common && \ - pip3 install \ + rm -rf /var/lib/apt/lists/* && \This line kind of scares me. What is this doing, and why?
basically this is the standard approach for debian + docker: install then cleanup local caches as they just take space in the final image, without much benefit (since "apt-get update" will regenerate those files anyway).
Signature · 6 lines
Gustavo Sverzut Barbieri http://profusion.mobi embedded systems -------------------------------------- MSN, GTalk, FaceTime: [email protected] Skype: gsbarbieri Mobile: +55 (16) 99354-9890
Re: [Fuego] [PATCH 3/3] Add CheckScreenshot fuego_release_test dependencies
Quoted 40 lines
-----Original Message-----
From: Gustavo Sverzut BarbieriQuoted 25 lines · On Fri, May 4, 2018 at 5:22 PM, <[email protected]> wrote:
Quoted 25 lines
-----Original Message-----
From: Guilherme Campos Camargo
A new class of tests has been included infuego_release_test. The purpose of this new class is to compare screenshots.This patch adds the newly required dependencies: imagemagick and python-pillow, that are used by CheckScreenshot.
Signed-off-by Guilherme Campos Camargo <[email protected]>--- Dockerfile | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-)Dockerfile +1
-0@@ -78,10 +78,13 @@ RUN apt-get update && \ chromium \ curl \ gnupg2 \ + imagemagick \Quoted 8 lines
Dockerfile RUN apt-get update && \ · line 86
Quoted 6 lines
Dockerfile +2
-1python3 \ python3-pip \ + python3-pillow \ software-properties-common && \ - pip3 install \ + rm -rf /var/lib/apt/lists/* && \This line kind of scares me. What is this doing, and why?
Quoted 4 lines
basically this is the standard approach for debian + docker: install then cleanup local caches as they just take space in the final image, without much benefit (since "apt-get update" will regenerate those files anyway).
OK - sounds good.
-- Tim