drm/i915: configure the transcoder clocks before touching pipeconf on HSW+
Subsystems (2)
PATCH 1/1 drm/i915: configure the transcoder clocks before touching pipeconf on HSW+
For all platforms that run haswell_crtc_enable, our spec tells us to configure the transcoder clocks before it tells us to set pipeconf and the other pipe/transcoder/plane registers.
For some reason we've been able to get away with doing what we were doing until now, but starting from Icelake, we get machine hangs if we try to touch the pipe/transcoder registers without having the clocks configured.
So this patch changes all the relevant platforms to call intel_ddi_enable_pipe_clock at the point we're supposed to, according to the spec.
It seems there is a way to work around this problem on ICL with some chicken bit, but I still couldn't find which one it is, and it's better if we just do the right thing here.
--- drivers/gpu/drm/i915/intel_display.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)
Luckily our CI system should be in a spot where it is able to tell us whether this patch is good with high confidence. I haven't tested it on every affected platform.
drivers/gpu/drm/i915/intel_display.c +4 -4
@@ -5578,8 +5578,11 @@ static void haswell_crtc_enable(struct intel_crtc_state *pipe_config, &intel_crtc->config->fdi_m_n, NULL); } -if (!transcoder_is_dsi (cpu_transcoder)) +if (!transcoder_is_dsi (cpu_transcoder)) { +intel_ddi_enable_pipe_clock (pipe_config); +haswell_set_pipeconf (crtc); + }haswell_set_pipemisc (crtc);
@@ -5589,9 +5592,6 @@ static void haswell_crtc_enable(struct intel_crtc_state *pipe_config,intel_encoders_pre_enable (crtc, pipe_config, old_state); -if (!transcoder_is_dsi (cpu_transcoder)) -intel_ddi_enable_pipe_clock (pipe_config); -/* Display WA #1180: WaDisableScalarClockGating: glk, cnl */ psl_clkgate_wa = (IS_GEMINILAKE (dev_priv) ||IS_CANNONLAKE (dev_priv)) && intel_crtc->config->pch_pfit.enabled;
Signature · 6 lines
2.14.3 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Patchwork
CI✓ Fi.CI.BAT: success for drm/i915: configure the transcoder clocks before touching pipeconf on HSW+
== Series Details ==
== Series Details ==
Series: drm/i915: configure the transcoder clocks before touching pipeconf on HSW+
URL : https://patchwork.freedesktop.org/series/42436/
State : success
== Summary ==
= CI Bug Log - changes from CI_DRM_4112 -> Patchwork_8840 =
== Summary - SUCCESS ==
No regressions found.
External URL: https://patchwork.freedesktop.org/api/1.0/series/42436/revisions/1/mbox/
== Known issues ==
Here are the changes found in Patchwork_8840 that come from known issues:
=== IGT changes ===
==== Issues hit ====
igt@kms_pipe_crc_basic@suspend-read-crc-pipe-c:
fi-ivb-3520m: PASS -> DMESG-WARN (fdo#106084)fdo#106084 https://bugs.freedesktop.org/show_bug.cgi?id=106084
== Participating hosts (39 -> 22) ==
Missing (17): fi-hsw-4770r fi-kbl-7567u fi-ilk-m540 fi-bdw-5557u fi-skl-gvtdvm fi-skl-6770hq fi-bdw-gvtdvm fi-skl-guc fi-cnl-y3 fi-skl-6260u fi-cfl-8700k fi-kbl-7500u fi-ctg-p8600 fi-hsw-4770 fi-cfl-s3 fi-skl-6700hq fi-skl-6700k2
== Build changes ==
* Linux: CI_DRM_4112 -> Patchwork_8840
CI_DRM_4112: 423a00794c9d9610a71d8a02cd3bc17c6fe5fae1 @ git://anongit.freedesktop.org/gfx-ci/linux
IGT_4452: 29ae12bd764e3b1876356e7628a32192b4ec9066 @ git://anongit.freedesktop.org/xorg/app/intel-gpu-tools
Patchwork_8840: 87aad90c198c1fd70a6582f5fd839a276da0ddff @ git://anongit.freedesktop.org/gfx-ci/linux
piglit_4452: 04a2952c5b3782eb03cb136bb16d89daaf243f14 @ git://anongit.freedesktop.org/piglit
== Linux commits ==
87aad90c198c drm/i915: configure the transcoder clocks before touching pipeconf on HSW+
== Logs ==
For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_8840/issues.html
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Patchwork
CI✓ Fi.CI.BAT: success for drm/i915: configure the transcoder clocks before touching pipeconf on HSW+
In reply to Paulo Zanoni== Series Details ==
== Series Details ==
Series: drm/i915: configure the transcoder clocks before touching pipeconf on HSW+
URL : https://patchwork.freedesktop.org/series/42436/
State : success
== Summary ==
= CI Bug Log - changes from CI_DRM_4112 -> Patchwork_8842 =
== Summary - SUCCESS ==
No regressions found.
External URL: https://patchwork.freedesktop.org/api/1.0/series/42436/revisions/1/mbox/
== Known issues ==
Here are the changes found in Patchwork_8842 that come from known issues:
=== IGT changes ===
==== Issues hit ====
igt@kms_pipe_crc_basic@suspend-read-crc-pipe-a:
fi-ivb-3520m: PASS -> DMESG-WARN (fdo#106084)
fi-cnl-psr: PASS -> DMESG-WARN (fdo#104951) fdo#104951 https://bugs.freedesktop.org/show_bug.cgi?id=104951
fdo#106084 https://bugs.freedesktop.org/show_bug.cgi?id=106084
== Participating hosts (39 -> 22) ==
Missing (17): fi-hsw-4770r fi-kbl-7567u fi-ilk-m540 fi-bdw-5557u fi-skl-gvtdvm fi-skl-6770hq fi-bdw-gvtdvm fi-skl-guc fi-cnl-y3 fi-skl-6260u fi-cfl-8700k fi-kbl-7500u fi-ctg-p8600 fi-hsw-4770 fi-cfl-s3 fi-skl-6700hq fi-skl-6700k2
== Build changes ==
* Linux: CI_DRM_4112 -> Patchwork_8842
CI_DRM_4112: 423a00794c9d9610a71d8a02cd3bc17c6fe5fae1 @ git://anongit.freedesktop.org/gfx-ci/linux
IGT_4452: 29ae12bd764e3b1876356e7628a32192b4ec9066 @ git://anongit.freedesktop.org/xorg/app/intel-gpu-tools
Patchwork_8842: 96dd83b16e1d41740c95f80905d941799befd6c8 @ git://anongit.freedesktop.org/gfx-ci/linux
piglit_4452: 04a2952c5b3782eb03cb136bb16d89daaf243f14 @ git://anongit.freedesktop.org/piglit
== Linux commits ==
96dd83b16e1d drm/i915: configure the transcoder clocks before touching pipeconf on HSW+
== Logs ==
For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_8842/issues.html
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Patchwork
CI✓ Fi.CI.BAT: success for drm/i915: configure the transcoder clocks before touching pipeconf on HSW+
In reply to Paulo Zanoni== Series Details ==
== Series Details ==
Series: drm/i915: configure the transcoder clocks before touching pipeconf on HSW+
URL : https://patchwork.freedesktop.org/series/42436/
State : success
== Summary ==
= CI Bug Log - changes from CI_DRM_4112 -> Patchwork_8843 =
== Summary - WARNING ==
Minor unknown changes coming with Patchwork_8843 need to be verified manually.
If you think the reported changes have nothing to do with the changes introduced in Patchwork_8843, please notify your bug team to allow them to document this new failure mode, which will reduce false positives in CI.
External URL: https://patchwork.freedesktop.org/api/1.0/series/42436/revisions/1/mbox/
== Possible new issues ==
Here are the unknown changes that may have been introduced in Patchwork_8843:
=== IGT changes ===
==== Warnings ====
igt@gem_exec_gttfill@basic:
fi-pnv-d510: PASS -> SKIP== Known issues ==
Here are the changes found in Patchwork_8843 that come from known issues:
=== IGT changes ===
==== Issues hit ====
igt@kms_pipe_crc_basic@suspend-read-crc-pipe-c:
fi-ivb-3520m: PASS -> DMESG-WARN (fdo#106084)
==== Possible fixes ====
igt@kms_pipe_crc_basic@suspend-read-crc-pipe-b:
fi-ivb-3520m: DMESG-WARN (fdo#106084) -> PASSfdo#106084 https://bugs.freedesktop.org/show_bug.cgi?id=106084
== Participating hosts (39 -> 22) ==
Missing (17): fi-hsw-4770r fi-kbl-7567u fi-ilk-m540 fi-bdw-5557u fi-skl-gvtdvm fi-skl-6770hq fi-bdw-gvtdvm fi-skl-guc fi-cnl-y3 fi-skl-6260u fi-cfl-8700k fi-kbl-7500u fi-ctg-p8600 fi-hsw-4770 fi-cfl-s3 fi-skl-6700hq fi-skl-6700k2
== Build changes ==
* Linux: CI_DRM_4112 -> Patchwork_8843
CI_DRM_4112: 423a00794c9d9610a71d8a02cd3bc17c6fe5fae1 @ git://anongit.freedesktop.org/gfx-ci/linux
IGT_4452: 29ae12bd764e3b1876356e7628a32192b4ec9066 @ git://anongit.freedesktop.org/xorg/app/intel-gpu-tools
Patchwork_8843: d2ffa705b37a7cd5dd34563dc5f0cf81198ce33d @ git://anongit.freedesktop.org/gfx-ci/linux
piglit_4452: 04a2952c5b3782eb03cb136bb16d89daaf243f14 @ git://anongit.freedesktop.org/piglit
== Linux commits ==
d2ffa705b37a drm/i915: configure the transcoder clocks before touching pipeconf on HSW+
== Logs ==
For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_8843/issues.html
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Patchwork
CI✓ Fi.CI.IGT: success for drm/i915: configure the transcoder clocks before touching pipeconf on HSW+
In reply to Paulo Zanoni== Series Details ==
== Series Details ==
Series: drm/i915: configure the transcoder clocks before touching pipeconf on HSW+
URL : https://patchwork.freedesktop.org/series/42436/
State : success
== Summary ==
= CI Bug Log - changes from CI_DRM_4112_full -> Patchwork_8840_full =
== Summary - SUCCESS ==
No regressions found.
External URL: https://patchwork.freedesktop.org/api/1.0/series/42436/revisions/1/mbox/
== Known issues ==
Here are the changes found in Patchwork_8840_full that come from known issues:
=== IGT changes ===
==== Issues hit ====
igt@kms_flip@absolute-wf_vblank-interruptible:
shard-glk: PASS -> FAIL (fdo#106087)
igt@kms_flip@flip-vs-absolute-wf_vblank-interruptible:
shard-glk: PASS -> FAIL (fdo#100368)
igt@prime_vgem@basic-fence-flip:
shard-glk: PASS -> FAIL (fdo#104008)
==== Possible fixes ====
igt@kms_flip@flip-vs-expired-vblank:
shard-glk: FAIL (fdo#105707) -> PASS
igt@kms_flip@flip-vs-expired-vblank-interruptible:
shard-glk: FAIL (fdo#105363, fdo#102887) -> PASS
igt@kms_flip@plain-flip-fb-recreate-interruptible:
shard-glk: FAIL (fdo#100368) -> PASS fdo#100368 https://bugs.freedesktop.org/show_bug.cgi?id=100368
fdo#102887 https://bugs.freedesktop.org/show_bug.cgi?id=102887
fdo#104008 https://bugs.freedesktop.org/show_bug.cgi?id=104008
fdo#105363 https://bugs.freedesktop.org/show_bug.cgi?id=105363
fdo#105707 https://bugs.freedesktop.org/show_bug.cgi?id=105707
fdo#106087 https://bugs.freedesktop.org/show_bug.cgi?id=106087
== Participating hosts (9 -> 6) ==
Missing (3): shard-glkb shard-hsw shard-kbl
== Build changes ==
* Linux: CI_DRM_4112 -> Patchwork_8840
CI_DRM_4112: 423a00794c9d9610a71d8a02cd3bc17c6fe5fae1 @ git://anongit.freedesktop.org/gfx-ci/linux
IGT_4452: 29ae12bd764e3b1876356e7628a32192b4ec9066 @ git://anongit.freedesktop.org/xorg/app/intel-gpu-tools
Patchwork_8840: 87aad90c198c1fd70a6582f5fd839a276da0ddff @ git://anongit.freedesktop.org/gfx-ci/linux
piglit_4452: 04a2952c5b3782eb03cb136bb16d89daaf243f14 @ git://anongit.freedesktop.org/piglit
== Logs ==
For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_8840/shards.html
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Patchwork
CI✓ Fi.CI.IGT: success for drm/i915: configure the transcoder clocks before touching pipeconf on HSW+
In reply to Paulo Zanoni== Series Details ==
== Series Details ==
Series: drm/i915: configure the transcoder clocks before touching pipeconf on HSW+
URL : https://patchwork.freedesktop.org/series/42436/
State : success
== Summary ==
= CI Bug Log - changes from CI_DRM_4112_full -> Patchwork_8842_full =
== Summary - SUCCESS ==
No regressions found.
External URL: https://patchwork.freedesktop.org/api/1.0/series/42436/revisions/1/mbox/
== Known issues ==
Here are the changes found in Patchwork_8842_full that come from known issues:
=== IGT changes ===
==== Issues hit ====
igt@kms_cursor_crc@cursor-128x128-dpms:
shard-apl: PASS -> FAIL (fdo#104645, fdo#103232)
igt@kms_flip@absolute-wf_vblank-interruptible:
shard-glk: PASS -> FAIL (fdo#106087)
igt@kms_flip@plain-flip-fb-recreate:
shard-glk: PASS -> FAIL (fdo#100368) +1
igt@kms_frontbuffer_tracking@fbc-rgb565-draw-mmap-cpu:
shard-apl: PASS -> FAIL (fdo#103167)
igt@perf_pmu@busy-check-all-vcs0:
shard-snb: PASS -> FAIL (fdo#105106)
==== Possible fixes ====
igt@kms_flip@flip-vs-expired-vblank:
shard-glk: FAIL (fdo#105707) -> PASS
igt@kms_flip@flip-vs-expired-vblank-interruptible:
shard-glk: FAIL (fdo#102887, fdo#105363) -> PASS
igt@kms_flip@plain-flip-fb-recreate-interruptible:
shard-glk: FAIL (fdo#100368) -> PASS +2 fdo#100368 https://bugs.freedesktop.org/show_bug.cgi?id=100368
fdo#102887 https://bugs.freedesktop.org/show_bug.cgi?id=102887
fdo#103167 https://bugs.freedesktop.org/show_bug.cgi?id=103167
fdo#103232 https://bugs.freedesktop.org/show_bug.cgi?id=103232
fdo#104645 https://bugs.freedesktop.org/show_bug.cgi?id=104645
fdo#105106 https://bugs.freedesktop.org/show_bug.cgi?id=105106
fdo#105363 https://bugs.freedesktop.org/show_bug.cgi?id=105363
fdo#105707 https://bugs.freedesktop.org/show_bug.cgi?id=105707
fdo#106087 https://bugs.freedesktop.org/show_bug.cgi?id=106087
== Participating hosts (9 -> 5) ==
Missing (4): shard-glkb pig-glk-j4005 shard-hsw shard-kbl
== Build changes ==
* Linux: CI_DRM_4112 -> Patchwork_8842
CI_DRM_4112: 423a00794c9d9610a71d8a02cd3bc17c6fe5fae1 @ git://anongit.freedesktop.org/gfx-ci/linux
IGT_4452: 29ae12bd764e3b1876356e7628a32192b4ec9066 @ git://anongit.freedesktop.org/xorg/app/intel-gpu-tools
Patchwork_8842: 96dd83b16e1d41740c95f80905d941799befd6c8 @ git://anongit.freedesktop.org/gfx-ci/linux
piglit_4452: 04a2952c5b3782eb03cb136bb16d89daaf243f14 @ git://anongit.freedesktop.org/piglit
== Logs ==
For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_8842/shards.html
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Patchwork
CI✓ Fi.CI.IGT: success for drm/i915: configure the transcoder clocks before touching pipeconf on HSW+
In reply to Paulo Zanoni== Series Details ==
== Series Details ==
Series: drm/i915: configure the transcoder clocks before touching pipeconf on HSW+
URL : https://patchwork.freedesktop.org/series/42436/
State : success
== Summary ==
= CI Bug Log - changes from CI_DRM_4112_full -> Patchwork_8843_full =
== Summary - SUCCESS ==
No regressions found.
External URL: https://patchwork.freedesktop.org/api/1.0/series/42436/revisions/1/mbox/
== Known issues ==
Here are the changes found in Patchwork_8843_full that come from known issues:
=== IGT changes ===
==== Possible fixes ====
igt@kms_flip@flip-vs-expired-vblank:
shard-glk: FAIL (fdo#105707) -> PASS
igt@kms_flip@flip-vs-expired-vblank-interruptible:
shard-glk: FAIL (fdo#105363, fdo#102887) -> PASS
igt@kms_flip@plain-flip-fb-recreate-interruptible:
shard-glk: FAIL (fdo#100368) -> PASS +1
igt@kms_setmode@basic:
shard-glk: FAIL (fdo#99912) -> PASS
igt@kms_sysfs_edid_timing:
shard-apl: WARN (fdo#100047) -> PASS fdo#100047 https://bugs.freedesktop.org/show_bug.cgi?id=100047
fdo#100368 https://bugs.freedesktop.org/show_bug.cgi?id=100368
fdo#102887 https://bugs.freedesktop.org/show_bug.cgi?id=102887
fdo#105363 https://bugs.freedesktop.org/show_bug.cgi?id=105363
fdo#105707 https://bugs.freedesktop.org/show_bug.cgi?id=105707
fdo#99912 https://bugs.freedesktop.org/show_bug.cgi?id=99912
== Participating hosts (9 -> 6) ==
Missing (3): shard-glkb shard-hsw shard-kbl
== Build changes ==
* Linux: CI_DRM_4112 -> Patchwork_8843
CI_DRM_4112: 423a00794c9d9610a71d8a02cd3bc17c6fe5fae1 @ git://anongit.freedesktop.org/gfx-ci/linux
IGT_4452: 29ae12bd764e3b1876356e7628a32192b4ec9066 @ git://anongit.freedesktop.org/xorg/app/intel-gpu-tools
Patchwork_8843: d2ffa705b37a7cd5dd34563dc5f0cf81198ce33d @ git://anongit.freedesktop.org/gfx-ci/linux
piglit_4452: 04a2952c5b3782eb03cb136bb16d89daaf243f14 @ git://anongit.freedesktop.org/piglit
== Logs ==
For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_8843/shards.html
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Quoted 4 lines · Paulo Zanoni
For all platforms that run
haswell_crtc_enable, our spec tells us to configure the transcoder clocks before it tells us to set pipeconf and the other pipe/transcoder/plane registers.
Quoted 8 lines
For some reason we've been able to get away with doing what we were doing until now, but starting from Icelake, we get machine hangs if we try to touch the pipe/transcoder registers without having the clocks configured.
So this patch changes all the relevant platforms to call
intel_ddi_enable_pipe_clockat the point we're supposed to, according to the spec.
I don't think this really matches the spec. You're now enabling the clock before configuring the port stuff and link training. So AFAICS intel_ddi_enable_pipe_clock() seems to be in the correct place, but we're just configuring all the pipe/transcoder/etc. stuff way too early.
Quoted 50 lines
It seems there is a way to work around this problem on ICL with some chicken bit, but I still couldn't find which one it is, and it's better if we just do the right thing here.
Cc Arthur J Runyan <[email protected]>Cc James Ausmus <[email protected]>Signed-off-by Paulo Zanoni <[email protected]>--- drivers/gpu/drm/i915/intel_display.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)Luckily our CI system should be in a spot where it is able to tell us whether this patch is good with high confidence. I haven't tested it on every affected platform.
drivers/gpu/drm/i915/intel_display.c +4
-4@@ -5578,8 +5578,11 @@ static void haswell_crtc_enable(struct intel_crtc_state *pipe_config, &intel_crtc->config->fdi_m_n, NULL); } -if (!transcoder_is_dsi (cpu_transcoder)) +if (!transcoder_is_dsi (cpu_transcoder)) { +intel_ddi_enable_pipe_clock (pipe_config); +haswell_set_pipeconf (crtc); + }haswell_set_pipemisc (crtc);@@ -5589,9 +5592,6 @@ static void haswell_crtc_enable(struct intel_crtc_state *pipe_config,intel_encoders_pre_enable (crtc, pipe_config, old_state); -if (!transcoder_is_dsi (cpu_transcoder)) -intel_ddi_enable_pipe_clock (pipe_config); -/* Display WA #1180: WaDisableScalarClockGating: glk, cnl */ psl_clkgate_wa = (IS_GEMINILAKE (dev_priv) ||IS_CANNONLAKE (dev_priv)) && intel_crtc->config->pch_pfit.enabled;Signature · 6 lines
2.14.3 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Signature · 6 lines
Ville Syrjälä Intel _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Em Seg, 2018-04-30 às 21:12 +0300, Ville Syrjälä escreveu:
Quoted 19 lines · Paulo Zanoni
Quoted 13 lines
For all platforms that run
haswell_crtc_enable, our spec tells us to
configure the transcoder clocks before it tells us to set pipeconf and
the other pipe/transcoder/plane registers.For some reason we've been able to get away with doing what we were doing until now, but starting from Icelake, we get machine hangs if we
try to touch the pipe/transcoder registers without having the clocks
configured.Quoted 4 lines
So this patch changes all the relevant platforms to call
intel_ddi_enable_pipe_clockat the point we're supposed to, according
to the spec.
Quoted 5 lines
I don't think this really matches the spec. You're now enabling the clock before configuring the port stuff and link training. So AFAICS
intel_ddi_enable_pipe_clock()seems to be in the correct place, but we're just configuring all the pipe/transcoder/etc. stuff way too early.
You're right, I missed the link training part, it needs to come before.
But anyway, moving enable_pipe_clock() + link_training ()up is the same as moving all the pipe/transcoder/etc stuff down, the only difference being when we set intel_crtc->active. I'll write a second version.
Quoted 6 lines
Quoted 6 lines
It seems there is a way to work around this problem on ICL with some
chicken bit, but I still couldn't find which one it is, and it's better if we just do the right thing here.
We got the info we wanted and now know how to work around the problem, but I still think we should go for the solution where we program the hardware in the order it expects to be programmed.
Or we could do both: program correctly *and* enable the chicken bits.
Thanks,
Paulo
Quoted 50 lines
Quoted 50 lines
Cc Arthur J Runyan <[email protected]>Cc James Ausmus <[email protected]>Signed-off-by Paulo Zanoni <[email protected]>--- drivers/gpu/drm/i915/intel_display.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)Luckily our CI system should be in a spot where it is able to tell us
whether this patch is good with high confidence. I haven't tested it
on every affected platform.drivers/gpu/drm/i915/intel_display.c +4
-1@@ -5578,8 +5578,11 @@ static void haswell_crtc_enable(struct intel_crtc_state *pipe_config, &intel_crtc->config->fdi_m_n, NULL); } -if (!transcoder_is_dsi (cpu_transcoder)) +if (!transcoder_is_dsi (cpu_transcoder)) { +intel_ddi_enable_pipe_clock (pipe_config); +haswell_set_pipeconf (crtc); + }drivers/gpu/drm/i915/intel_display.c +0
-3haswell_set_pipemisc (crtc);@@ -5589,9 +5592,6 @@ static void haswell_crtc_enable(structintel_crtc_state *pipe_config,intel_encoders_pre_enable (crtc ,pipe_config ,old_state ); -if (!transcoder_is_dsi (cpu_transcoder)) -intel_ddi_enable_pipe_clock (pipe_config); -/* Display WA #1180: WaDisableScalarClockGating: glk, cnl */
psl_clkgate_wa= (IS_GEMINILAKE(dev_priv)||IS_CANNONLAKE(dev_priv)) &&
intel_crtc->config->pch_pfit.enabled;Signature · 1 line
2.14.3
Quoted 6 lines
Quoted 4 lines
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
PATCH 1/1 drm/i915: enable the pipe/transcoder/planes later on HSW+
In reply to Paulo ZanoniFor all platforms that run haswell_crtc_enable, our spec tells us to configure the transcoder clocks and do link training before it tells us to set pipeconf and the other pipe/transcoder/plane registers.
Starting from Icelake, we get machine hangs if we try to touch the pipe/transcoder registers without having the clocks configured and not having some chicken bits set. So this patch changes haswell_crtc_enable() to issue the calls at the appropriate order mandated by the spec.
While setting the appropriate chicken bits would also work here, it's better if we actually program the hardware the way it is intended to be programmed. And the chicken bit also has some theoretical downsides that may or may not affect us. Also, correctly programming the hardware does not prevent us from setting the chicken bits in a later patch in case we decide to.
v2: Don't forget link training (Ville).
--- drivers/gpu/drm/i915/intel_display.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-)
Again, I didn't test this patch on every affected platform. Let's see what the CI system says about it.
drivers/gpu/drm/i915/intel_display.c +5 -5
@@ -5559,6 +5559,11 @@ static void haswell_crtc_enable(struct intel_crtc_state *pipe_config,if (intel_crtc->config->shared_dpll)intel_enable_shared_dpll (intel_crtc); +intel_encoders_pre_enable (crtc, pipe_config, old_state); + +if (!transcoder_is_dsi (cpu_transcoder)) +intel_ddi_enable_pipe_clock (pipe_config); +if (intel_crtc_has_dp_encoder (intel_crtc->config))intel_dp_set_m_n (intel_crtc,M1_N1 );
@@ -5587,11 +5592,6 @@ static void haswell_crtc_enable(struct intel_crtc_state *pipe_config, intel_crtc->active = true; -intel_encoders_pre_enable (crtc, pipe_config, old_state); - -if (!transcoder_is_dsi (cpu_transcoder)) -intel_ddi_enable_pipe_clock (pipe_config); -/* Display WA #1180: WaDisableScalarClockGating: glk, cnl */ psl_clkgate_wa = (IS_GEMINILAKE (dev_priv) ||IS_CANNONLAKE (dev_priv)) && intel_crtc->config->pch_pfit.enabled;
Signature · 6 lines
2.14.3 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Re: [PATCH] drm/i915: enable the pipe/transcoder/planes later on HSW+
Quoted 3 lines · Paulo Zanoni
For all platforms that run
haswell_crtc_enable, our spec tells us to configure the transcoder clocks and do link training before it tells us to set pipeconf and the other pipe/transcoder/plane registers.
oh! I remember this order years ago when trying to figure out where to enable PSR... but I never noticed we weren't fully respecting it.
Quoted 14 lines
Starting from Icelake, we get machine hangs if we try to touch the pipe/transcoder registers without having the clocks configured and not having some chicken bits set. So this patch changes
haswell_crtc_enable()to issue the calls at the appropriate order mandated by the spec.While setting the appropriate chicken bits would also work here, it's better if we actually program the hardware the way it is intended to be programmed. And the chicken bit also has some theoretical downsides that may or may not affect us. Also, correctly programming the hardware does not prevent us from setting the chicken bits in a later patch in case we decide to.
Quoted 6 lines
v2: Don't forget link training (Ville).
Cc Arthur J Runyan <[email protected]>Cc James Ausmus <[email protected]>Cc Ville Syrjälä <[email protected]>Signed-off-by Paulo Zanoni <[email protected]>
makes sense for me.... let's now just see CI is happy as well! ;)
Quoted 42 lines
--- drivers/gpu/drm/i915/intel_display.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-)Again, I didn't test this patch on every affected platform. Let's see what the CI system says about it.
drivers/gpu/drm/i915/intel_display.c +5
-5@@ -5559,6 +5559,11 @@ static void haswell_crtc_enable(struct intel_crtc_state *pipe_config,if (intel_crtc->config->shared_dpll)intel_enable_shared_dpll (intel_crtc); +intel_encoders_pre_enable (crtc, pipe_config, old_state); + +if (!transcoder_is_dsi (cpu_transcoder)) +intel_ddi_enable_pipe_clock (pipe_config); +if (intel_crtc_has_dp_encoder (intel_crtc->config))intel_dp_set_m_n (intel_crtc,M1_N1 );@@ -5587,11 +5592,6 @@ static void haswell_crtc_enable(struct intel_crtc_state *pipe_config, intel_crtc->active = true; -intel_encoders_pre_enable (crtc, pipe_config, old_state); - -if (!transcoder_is_dsi (cpu_transcoder)) -intel_ddi_enable_pipe_clock (pipe_config); -/* Display WA #1180: WaDisableScalarClockGating: glk, cnl */ psl_clkgate_wa = (IS_GEMINILAKE (dev_priv) ||IS_CANNONLAKE (dev_priv)) && intel_crtc->config->pch_pfit.enabled;Signature · 6 lines
2.14.3 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Re: [PATCH] drm/i915: enable the pipe/transcoder/planes later on HSW+
In reply to Paulo ZanoniQuoted 17 lines · Paulo Zanoni
For all platforms that run
haswell_crtc_enable, our spec tells us to configure the transcoder clocks and do link training before it tells us to set pipeconf and the other pipe/transcoder/plane registers.Starting from Icelake, we get machine hangs if we try to touch the pipe/transcoder registers without having the clocks configured and not having some chicken bits set. So this patch changes
haswell_crtc_enable()to issue the calls at the appropriate order mandated by the spec.While setting the appropriate chicken bits would also work here, it's better if we actually program the hardware the way it is intended to be programmed. And the chicken bit also has some theoretical downsides that may or may not affect us. Also, correctly programming the hardware does not prevent us from setting the chicken bits in a later patch in case we decide to.
Quoted 6 lines
v2: Don't forget link training (Ville).
Cc Arthur J Runyan <[email protected]>Cc James Ausmus <[email protected]>Cc Ville Syrjälä <[email protected]>Signed-off-by Paulo Zanoni <[email protected]>
yes I verified this against the display modset sequence mentioned in the spec and this is correct order.
Quoted 42 lines
--- drivers/gpu/drm/i915/intel_display.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-)Again, I didn't test this patch on every affected platform. Let's see what the CI system says about it.
drivers/gpu/drm/i915/intel_display.c +5
-5@@ -5559,6 +5559,11 @@ static void haswell_crtc_enable(struct intel_crtc_state *pipe_config,if (intel_crtc->config->shared_dpll)intel_enable_shared_dpll (intel_crtc); +intel_encoders_pre_enable (crtc, pipe_config, old_state); + +if (!transcoder_is_dsi (cpu_transcoder)) +intel_ddi_enable_pipe_clock (pipe_config); +if (intel_crtc_has_dp_encoder (intel_crtc->config))intel_dp_set_m_n (intel_crtc,M1_N1 );@@ -5587,11 +5592,6 @@ static void haswell_crtc_enable(struct intel_crtc_state *pipe_config, intel_crtc->active = true; -intel_encoders_pre_enable (crtc, pipe_config, old_state); - -if (!transcoder_is_dsi (cpu_transcoder)) -intel_ddi_enable_pipe_clock (pipe_config); -/* Display WA #1180: WaDisableScalarClockGating: glk, cnl */ psl_clkgate_wa = (IS_GEMINILAKE (dev_priv) ||IS_CANNONLAKE (dev_priv)) && intel_crtc->config->pch_pfit.enabled;Signature · 6 lines
2.14.3 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Patchwork
CI✗ Fi.CI.BAT: failure for drm/i915: configure the transcoder clocks before touching pipeconf on HSW+ (rev2)
In reply to Paulo Zanoni== Series Details ==
== Series Details ==
Series: drm/i915: configure the transcoder clocks before touching pipeconf on HSW+ (rev2)
URL : https://patchwork.freedesktop.org/series/42436/
State : failure
== Summary ==
= CI Bug Log - changes from CI_DRM_4125 -> Patchwork_8884 =
== Summary - FAILURE ==
Serious unknown changes coming with Patchwork_8884 absolutely need to be verified manually.
If you think the reported changes have nothing to do with the changes introduced in Patchwork_8884, please notify your bug team to allow them to document this new failure mode, which will reduce false positives in CI.
External URL: https://patchwork.freedesktop.org/api/1.0/series/42436/revisions/2/mbox/
== Possible new issues ==
Here are the unknown changes that may have been introduced in Patchwork_8884:
=== IGT changes ===
==== Possible regressions ====
igt@kms_frontbuffer_tracking@basic:
fi-hsw-peppy: PASS -> DMESG-FAIL== Known issues ==
Here are the changes found in Patchwork_8884 that come from known issues:
=== IGT changes ===
==== Issues hit ====
igt@gem_mmap_gtt@basic-small-bo-tiledx:
fi-gdg-551: PASS -> FAIL (fdo#102575)
igt@kms_pipe_crc_basic@suspend-read-crc-pipe-c:
fi-bxt-dsi: PASS -> INCOMPLETE (fdo#103927)
==== Possible fixes ====
igt@kms_flip@basic-flip-vs-wf_vblank:
fi-hsw-4200u: FAIL (fdo#100368) -> PASS
igt@kms_frontbuffer_tracking@basic:
fi-hsw-4200u: DMESG-FAIL (fdo#106103, fdo#102614) -> PASS
igt@kms_pipe_crc_basic@hang-read-crc-pipe-b:
fi-skl-6700k2: FAIL (fdo#103191) -> PASS fdo#100368 https://bugs.freedesktop.org/show_bug.cgi?id=100368
fdo#102575 https://bugs.freedesktop.org/show_bug.cgi?id=102575
fdo#102614 https://bugs.freedesktop.org/show_bug.cgi?id=102614
fdo#103191 https://bugs.freedesktop.org/show_bug.cgi?id=103191
fdo#103927 https://bugs.freedesktop.org/show_bug.cgi?id=103927
fdo#106103 https://bugs.freedesktop.org/show_bug.cgi?id=106103
== Participating hosts (39 -> 37) ==
Additional (1): fi-byt-j1900
Missing (3): fi-ctg-p8600 fi-ilk-m540 fi-skl-6700hq
== Build changes ==
* Linux: CI_DRM_4125 -> Patchwork_8884
CI_DRM_4125: c862a73270499cdd3d7c04c889e43303ae5f928e @ git://anongit.freedesktop.org/gfx-ci/linux
IGT_4456: 43761534c6482dc67b9c3d8eeecd425ef40b3c4c @ git://anongit.freedesktop.org/xorg/app/intel-gpu-tools
Patchwork_8884: 4a5b649073070534c7a0f7a1b828b2c3f7acd690 @ git://anongit.freedesktop.org/gfx-ci/linux
piglit_4456: 30b992bdc047073e1fe99b1ac622f026618a8081 @ git://anongit.freedesktop.org/piglit
== Linux commits ==
4a5b64907307 drm/i915: enable the pipe/transcoder/planes later on HSW+
== Logs ==
For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_8884/issues.html
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Re: ✗ Fi.CI.BAT: failure for drm/i915: configure the transcoder clocks before touching pipeconf on HSW+ (rev2)
Em Qua, 2018-05-02 às 22:23 +0000, Patchwork escreveu:
Quoted 13 lines
== Series Details ==
Series: drm/i915: configure the transcoder clocks before touching pipeconf on HSW+ (rev2)
URL : https://patchwork.freedesktop.org/series/42436/
State : failure== Summary ==
= CI Bug Log - changes from
CI_DRM_4125->Patchwork_8884=== Summary - FAILURE ==
Quoted 7 lines
Serious unknown changes coming with
Patchwork_8884absolutely need
to be
verified manually.If you think the reported changes have nothing to do with the
changes
introduced inPatchwork_8884, please notify your bug team
Can't the bot just give me the emails to cc?
Quoted 3 lines
to allow them
to document this new failure mode, which will reduce false
positives in CI.
There were 2 runs for this series, both with different failures.
The FBC one is caused by a FIFO underrun (which looks like we never properly fixed, and FBC is disabled on HSW anyway).
In the other email there's a possible PNV regresison which definitely has nothing to do with this series. The other is a wedged GPU on module reload, which also doesn't seem to be caused by us.
Quoted 75 lines
External URL: https://patchwork.freedesktop.org/api/1.0/series/4243
6/revisions/2/mbox/== Possible new issues ==
Here are the unknown changes that may have been introduced in
Patchwork_8884:=== IGT changes ===
==== Possible regressions ==== igt@kms_frontbuffer_tracking@basic: fi-hsw-peppy: PASS -> DMESG-FAIL== Known issues ==
Here are the changes found in
Patchwork_8884that come from known
issues:=== IGT changes ===
==== Issues hit ==== igt@gem_mmap_gtt@basic-small-bo-tiledx: fi-gdg-551: PASS -> FAIL (fdo#102575) igt@kms_pipe_crc_basic@suspend-read-crc-pipe-c: fi-bxt-dsi: PASS -> INCOMPLETE (fdo#103927) ==== Possible fixes ==== igt@kms_flip@basic-flip-vs-wf_vblank: fi-hsw-4200u: FAIL (fdo#100368) -> PASS igt@kms_frontbuffer_tracking@basic: fi-hsw-4200u: DMESG-FAIL (fdo#106103, fdo#102614) -> PASS igt@kms_pipe_crc_basic@hang-read-crc-pipe-b: fi-skl-6700k2: FAIL (fdo#103191) -> PASSfdo#100368 https://bugs.freedesktop.org/show_bug.cgi?id=100368
fdo#102575 https://bugs.freedesktop.org/show_bug.cgi?id=102575
fdo#102614 https://bugs.freedesktop.org/show_bug.cgi?id=102614
fdo#103191 https://bugs.freedesktop.org/show_bug.cgi?id=103191
fdo#103927 https://bugs.freedesktop.org/show_bug.cgi?id=103927
fdo#106103 https://bugs.freedesktop.org/show_bug.cgi?id=106103== Participating hosts (39 -> 37) ==
Additional (1): fi-byt-j1900
Missing (3): fi-ctg-p8600 fi-ilk-m540 fi-skl-6700hq== Build changes ==
* Linux:
CI_DRM_4125->Patchwork_8884
CI_DRM_4125:c862a73270499cdd3d7c04c889e43303ae5f928e@git://anongit.freedesktop.org/gfx-ci/linux
IGT_4456:43761534c6482dc67b9c3d8eeecd425ef40b3c4c@git://anongit.freedesktop.org/xorg/app/intel-gpu-tools
Patchwork_8884:4a5b649073070534c7a0f7a1b828b2c3f7acd690@git://anongit.freedesktop.org/gfx-ci/linux
piglit_4456:30b992bdc047073e1fe99b1ac622f026618a8081@git://anongit.freedesktop.org/piglit== Linux commits ==
Quoted 7 lines
4a5b64907307drm/i915: enable the pipe/transcoder/planes later on HSW+== Logs ==
For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchw
ork_8884/issues.html
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Patchwork
CI✗ Fi.CI.BAT: failure for drm/i915: configure the transcoder clocks before touching pipeconf on HSW+ (rev2)
In reply to Paulo Zanoni== Series Details ==
== Series Details ==
Series: drm/i915: configure the transcoder clocks before touching pipeconf on HSW+ (rev2)
URL : https://patchwork.freedesktop.org/series/42436/
State : failure
== Summary ==
= CI Bug Log - changes from CI_DRM_4126 -> Patchwork_8887 =
== Summary - FAILURE ==
Serious unknown changes coming with Patchwork_8887 absolutely need to be verified manually.
If you think the reported changes have nothing to do with the changes introduced in Patchwork_8887, please notify your bug team to allow them to document this new failure mode, which will reduce false positives in CI.
External URL: https://patchwork.freedesktop.org/api/1.0/series/42436/revisions/2/mbox/
== Possible new issues ==
Here are the unknown changes that may have been introduced in Patchwork_8887:
=== IGT changes ===
==== Possible regressions ====
igt@drv_module_reload@basic-reload-inject:
fi-bsw-n3050: PASS -> DMESG-FAIL
==== Warnings ====
igt@gem_exec_gttfill@basic:
fi-pnv-d510: PASS -> SKIP== Known issues ==
Here are the changes found in Patchwork_8887 that come from known issues:
=== IGT changes ===
==== Issues hit ====
igt@gem_exec_suspend@basic-s3:
fi-skl-guc: PASS -> FAIL (fdo#104699)
igt@kms_pipe_crc_basic@suspend-read-crc-pipe-b:
fi-cnl-y3: PASS -> DMESG-WARN (fdo#104951)
==== Possible fixes ====
igt@debugfs_test@read_all_entries:
fi-snb-2520m: INCOMPLETE (fdo#103713) -> PASS
igt@gem_mmap_gtt@basic-small-bo-tiledx:
fi-gdg-551: FAIL (fdo#102575) -> PASS
igt@kms_frontbuffer_tracking@basic:
fi-hsw-peppy: DMESG-FAIL -> PASS fdo#102575 https://bugs.freedesktop.org/show_bug.cgi?id=102575
fdo#103713 https://bugs.freedesktop.org/show_bug.cgi?id=103713
fdo#104699 https://bugs.freedesktop.org/show_bug.cgi?id=104699
fdo#104951 https://bugs.freedesktop.org/show_bug.cgi?id=104951
== Participating hosts (40 -> 37) ==
Missing (3): fi-ctg-p8600 fi-ilk-m540 fi-skl-6700hq
== Build changes ==
* Linux: CI_DRM_4126 -> Patchwork_8887
CI_DRM_4126: c49cbe0d1eb8d4c0ad477b8c7fdc5fbd82617674 @ git://anongit.freedesktop.org/gfx-ci/linux
IGT_4457: 43761534c6482dc67b9c3d8eeecd425ef40b3c4c @ git://anongit.freedesktop.org/xorg/app/intel-gpu-tools
Patchwork_8887: e176465502803411e8e7bef4a7d8adf1e4206849 @ git://anongit.freedesktop.org/gfx-ci/linux
piglit_4457: 69a0d9192f52570211df74a12265c5d2b0721542 @ git://anongit.freedesktop.org/piglit
== Linux commits ==
e17646550280 drm/i915: enable the pipe/transcoder/planes later on HSW+
== Logs ==
For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_8887/issues.html
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Patchwork
CI✓ Fi.CI.BAT: success for drm/i915: configure the transcoder clocks before touching pipeconf on HSW+ (rev2)
In reply to Paulo Zanoni== Series Details ==
== Series Details ==
Series: drm/i915: configure the transcoder clocks before touching pipeconf on HSW+ (rev2)
URL : https://patchwork.freedesktop.org/series/42436/
State : success
== Summary ==
= CI Bug Log - changes from CI_DRM_4151 -> Patchwork_8929 =
== Summary - SUCCESS ==
No regressions found.
External URL: https://patchwork.freedesktop.org/api/1.0/series/42436/revisions/2/mbox/
== Known issues ==
Here are the changes found in Patchwork_8929 that come from known issues:
=== IGT changes ===
==== Issues hit ====
igt@drv_module_reload@basic-reload:
fi-bsw-n3050: PASS -> DMESG-FAIL (fdo#106373)
igt@gem_exec_suspend@basic-s4-devices:
fi-skl-guc: PASS -> FAIL (fdo#105900, fdo#104699) +1
igt@kms_flip@basic-flip-vs-wf_vblank:
fi-cnl-psr: PASS -> FAIL (fdo#100368)
igt@kms_frontbuffer_tracking@basic:
fi-hsw-4200u: PASS -> DMESG-FAIL (fdo#102614, fdo#106103)
==== Possible fixes ====
igt@drv_module_reload@basic-no-display:
fi-bsw-n3050: DMESG-FAIL (fdo#106373) -> PASS
igt@kms_chamelium@hdmi-hpd-fast:
fi-kbl-7500u: FAIL (fdo#103841, fdo#102672) -> SKIP
igt@kms_flip@basic-flip-vs-wf_vblank:
fi-elk-e7500: INCOMPLETE (fdo#103989) -> PASS
igt@kms_pipe_crc_basic@nonblocking-crc-pipe-a-frame-sequence:
fi-cnl-psr: FAIL (fdo#103481) -> PASS
igt@prime_vgem@basic-fence-flip:
fi-ilk-650: FAIL (fdo#104008) -> PASS fdo#100368 https://bugs.freedesktop.org/show_bug.cgi?id=100368
fdo#102614 https://bugs.freedesktop.org/show_bug.cgi?id=102614
fdo#102672 https://bugs.freedesktop.org/show_bug.cgi?id=102672
fdo#103481 https://bugs.freedesktop.org/show_bug.cgi?id=103481
fdo#103841 https://bugs.freedesktop.org/show_bug.cgi?id=103841
fdo#103989 https://bugs.freedesktop.org/show_bug.cgi?id=103989
fdo#104008 https://bugs.freedesktop.org/show_bug.cgi?id=104008
fdo#104699 https://bugs.freedesktop.org/show_bug.cgi?id=104699
fdo#105900 https://bugs.freedesktop.org/show_bug.cgi?id=105900
fdo#106103 https://bugs.freedesktop.org/show_bug.cgi?id=106103
fdo#106373 https://bugs.freedesktop.org/show_bug.cgi?id=106373
== Participating hosts (41 -> 35) ==
Missing (6): fi-ilk-m540 fi-byt-j1900 fi-byt-squawks fi-ctg-p8600 fi-glk-j4005 fi-skl-6700hq
== Build changes ==
* Linux: CI_DRM_4151 -> Patchwork_8929
CI_DRM_4151: 176975baca37c5cdb1632b9aa2ba0170c9ab53df @ git://anongit.freedesktop.org/gfx-ci/linux
IGT_4464: 1bb318b32db003a377da14715c7b80675a712b6b @ git://anongit.freedesktop.org/xorg/app/intel-gpu-tools
Patchwork_8929: 3ed9e5ed8acae24777f512cd36516a2815ccf907 @ git://anongit.freedesktop.org/gfx-ci/linux
piglit_4464: 33e58d5583eb7ed3966a1b905f875a1dfa959f6b @ git://anongit.freedesktop.org/piglit
== Linux commits ==
3ed9e5ed8aca drm/i915: enable the pipe/transcoder/planes later on HSW+
== Logs ==
For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_8929/issues.html
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Patchwork
CI✗ Fi.CI.IGT: failure for drm/i915: configure the transcoder clocks before touching pipeconf on HSW+ (rev2)
In reply to Paulo Zanoni== Series Details ==
== Series Details ==
Series: drm/i915: configure the transcoder clocks before touching pipeconf on HSW+ (rev2)
URL : https://patchwork.freedesktop.org/series/42436/
State : failure
== Summary ==
= CI Bug Log - changes from CI_DRM_4151_full -> Patchwork_8929_full =
== Summary - FAILURE ==
Serious unknown changes coming with Patchwork_8929_full absolutely need to be verified manually.
If you think the reported changes have nothing to do with the changes introduced in Patchwork_8929_full, please notify your bug team to allow them to document this new failure mode, which will reduce false positives in CI.
External URL: https://patchwork.freedesktop.org/api/1.0/series/42436/revisions/2/mbox/
== Possible new issues ==
Here are the unknown changes that may have been introduced in Patchwork_8929_full:
=== IGT changes ===
==== Possible regressions ====
igt@perf_pmu@interrupts-sync:
shard-hsw: PASS -> FAIL
==== Warnings ====
igt@gem_mocs_settings@mocs-rc6-blt:
shard-kbl: PASS -> SKIP
igt@pm_rc6_residency@rc6-accuracy:
shard-kbl: SKIP -> PASS== Known issues ==
Here are the changes found in Patchwork_8929_full that come from known issues:
=== IGT changes ===
==== Issues hit ====
igt@kms_flip@modeset-vs-vblank-race-interruptible:
shard-hsw: PASS -> FAIL (fdo#103060) +1
igt@kms_flip@wf_vblank-ts-check-interruptible:
shard-glk: PASS -> FAIL (fdo#100368)
igt@kms_rotation_crc@primary-rotation-180:
shard-apl: PASS -> FAIL (fdo#103925, fdo#104724)
igt@kms_setmode@basic:
shard-glk: PASS -> FAIL (fdo#99912)
==== Possible fixes ====
igt@drv_selftest@live_contexts:
shard-kbl: INCOMPLETE (fdo#103665) -> PASS
igt@drv_selftest@live_gtt:
shard-apl: INCOMPLETE (fdo#103927) -> PASS
igt@kms_flip@flip-vs-expired-vblank-interruptible:
shard-glk: FAIL (fdo#102887) -> PASS
igt@kms_flip@modeset-vs-vblank-race-interruptible:
shard-glk: FAIL (fdo#103060) -> PASS
igt@kms_flip@plain-flip-ts-check:
shard-hsw: FAIL (fdo#100368) -> PASS +1
igt@kms_pwrite_crc:
shard-kbl: DMESG-WARN (fdo#105602, fdo#103313, fdo#103558) -> PASS +6
igt@kms_rotation_crc@sprite-rotation-90-pos-100-0:
shard-apl: FAIL (fdo#103925, fdo#104724) -> PASS +1
igt@pm_rpm@debugfs-read:
shard-kbl: DMESG-WARN (fdo#103313, fdo#103558) -> PASS
igt@pm_rpm@i2c:
shard-kbl: DMESG-FAIL (fdo#103313, fdo#103558) -> PASS fdo#100368 https://bugs.freedesktop.org/show_bug.cgi?id=100368
fdo#102887 https://bugs.freedesktop.org/show_bug.cgi?id=102887
fdo#103060 https://bugs.freedesktop.org/show_bug.cgi?id=103060
fdo#103313 https://bugs.freedesktop.org/show_bug.cgi?id=103313
fdo#103558 https://bugs.freedesktop.org/show_bug.cgi?id=103558
fdo#103665 https://bugs.freedesktop.org/show_bug.cgi?id=103665
fdo#103925 https://bugs.freedesktop.org/show_bug.cgi?id=103925
fdo#103927 https://bugs.freedesktop.org/show_bug.cgi?id=103927
fdo#104724 https://bugs.freedesktop.org/show_bug.cgi?id=104724
fdo#105602 https://bugs.freedesktop.org/show_bug.cgi?id=105602
fdo#99912 https://bugs.freedesktop.org/show_bug.cgi?id=99912
== Participating hosts (6 -> 6) ==
No changes in participating hosts
== Build changes ==
* Linux: CI_DRM_4151 -> Patchwork_8929
CI_DRM_4151: 176975baca37c5cdb1632b9aa2ba0170c9ab53df @ git://anongit.freedesktop.org/gfx-ci/linux
IGT_4464: 1bb318b32db003a377da14715c7b80675a712b6b @ git://anongit.freedesktop.org/xorg/app/intel-gpu-tools
Patchwork_8929: 3ed9e5ed8acae24777f512cd36516a2815ccf907 @ git://anongit.freedesktop.org/gfx-ci/linux
piglit_4464: 33e58d5583eb7ed3966a1b905f875a1dfa959f6b @ git://anongit.freedesktop.org/piglit
== Logs ==
For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_8929/shards.html
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx