Skip to contentSkip to conversation

4.16.8-stable review

PATCH In review Greg Kroah-Hartman 5 participants 60 messages May 8, 2018 – May 9, 2018

Subsystems (3)
lore
Share & tools
lore

Greg Kroah-Hartman

author maintainer
#0 lore raw

cover 4.16.8-stable review

This is the start of the stable review cycle for the 4.16.8 release. There are 52 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Responses should be made by Thu May 10 07:38:51 UTC 2018. Anything received after that time might be too late.

The whole patch series can be found in one patch at:

	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.16.8-rc1.gz

or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.16.y
and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <[email protected]>

    Linux 4.16.8-rc1

Song Liu <[email protected]>
tracing: Fix bad use of igrab in trace_uprobe.c

Peter Zijlstra <[email protected]>
clocksource: Consistent de-rate when marking unstable

Peter Zijlstra <[email protected]>

    clocksource: Initialize cs->wd_list

Peter Zijlstra <[email protected]>
clocksource: Allow clocksource_mark_unstable() on unregistered clocksources

Agustin Vega-Frias <[email protected]>
irqchip/qcom: Fix check for spurious interrupts

Peter Zijlstra <[email protected]>
x86/tsc: Fix mark_tsc_unstable()

Peter Zijlstra <[email protected]>
x86/tsc: Always unregister clocksource_tsc_early

Anthoine Bourgeois <[email protected]>
KVM: x86: remove APIC Timer periodic/oneshot spikes

Mario Limonciello <[email protected]>
platform/x86: Kconfig: Fix dell-laptop dependency chain.

João Paulo Rechi Vita <[email protected]>
platform/x86: asus-wireless: Fix NULL pointer dereference

Bin Liu <[email protected]>
usb: musb: trace: fix NULL pointer dereference in musb_g_tx()

Bin Liu <[email protected]>
usb: musb: host: fix potential NULL pointer dereference

SZ Lin (林上智) <[email protected]>
USB: serial: option: adding support for ublox R410M

Johan Hovold <[email protected]>
USB: serial: option: reimplement interface masking

Alan Stern <[email protected]>
USB: Accept bulk endpoints with 1024-byte maxpacket

Mayank Rana <[email protected]>
usb: dwc3: gadget: Fix list_del corruption in dwc3_ep_dequeue

Greg Kroah-Hartman <[email protected]>
USB: serial: visor: handle potential invalid device configuration

Mathias Nyman <[email protected]>
xhci: Fix use-after-free in xhci_free_virt_device

Ben Hutchings <[email protected]>
test_firmware: fix setting old custom fw path back on exit, second try

Sean Paul <[email protected]>
drm/bridge: vga-dac: Fix edid memory leak

Thomas Hellstrom <[email protected]>
drm/vmwgfx: Fix a buffer object leak

Boris Brezillon <[email protected]>
drm/vc4: Make sure vc4_bo_{inc,dec}_usecnt() calls are balanced

ethanwu <[email protected]>
btrfs: Take trans lock before access running trans in check_delayed_ref

Bharat Potnuri <[email protected]>
iw_cxgb4: Atomically flush per QP HW CQEs

Sebastian Sanchez <[email protected]>
IB/hfi1: Fix NULL pointer dereference when invalid num_vls is used

Mike Marciniszyn <[email protected]>
IB/hfi1: Fix loss of BECN with AHG

Mike Marciniszyn <[email protected]>
IB/hfi1: Fix handling of FECN marked multicast packet

Randy Dunlap <[email protected]>
infiniband: mlx5: fix build errors when INFINIBAND_USER_ACCESS=m

Danit Goldberg <[email protected]>
IB/mlx5: Use unlimited rate when static rate is not supported

SZ Lin (林上智) <[email protected]>

    NET: usb: qmi_wwan: add support for ublox R410M PID 0x90b2

Leon Romanovsky <[email protected]>
RDMA/mlx5: Protect from shift operand overflow

Leon Romanovsky <[email protected]>
RDMA/mlx4: Add missed RSS hash inner header flag

Leon Romanovsky <[email protected]>
RDMA/mlx5: Fix multiple NULL-ptr deref errors in rereg_mr flow

Roland Dreier <[email protected]>
RDMA/ucma: Allow resolving address w/o specifying source address

Raju Rangoju <[email protected]>
RDMA/cxgb4: release hw resources on device removal

Jiri Slaby <[email protected]>
tools: power/acpi, revert to LD = gcc

Darrick J. Wong <[email protected]>
xfs: prevent creating negative-sized file via INSERT_RANGE

Ping-Ke Shih <[email protected]>
rtlwifi: cleanup 8723be ant_sel definition

Michel Dänzer <[email protected]>
swiotlb: fix inversed DMA_ATTR_NO_WARN test

Vittorio Gambaletta (VittGam) <[email protected]>
Input: atmel_mxt_ts - add touchpad button mapping for Samsung Chromebook Pro

Dmitry Torokhov <[email protected]>
Input: leds - fix out of bound access

Bryant G Ly <[email protected]>
scsi: target: Fix fortify_panic kernel exception

Mathieu Desnoyers <[email protected]>
tracepoint: Do not warn on ENOMEM

Matthew Wilcox <[email protected]>
errseq: Always report a writeback error once

Takashi Iwai <[email protected]>
ALSA: aloop: Add missing cable lock to ctl API callbacks

Robert Rosengren <[email protected]>
ALSA: aloop: Mark paused device as inactive

Takashi Sakamoto <[email protected]>
ALSA: dice: fix kernel NULL pointer dereference due to invalid calculation for array index

Takashi Iwai <[email protected]>
ALSA: seq: Fix races at MIDI encoding in snd_virmidi_output_trigger()

Takashi Iwai <[email protected]>
ALSA: pcm: Check PCM state at xfern compat ioctl

Takashi Iwai <[email protected]>
ALSA: hda - Fix incorrect usage of IS_REACHABLE()

Suzuki K Poulose <[email protected]>
arm64: Add work around for Arm Cortex-A55 Erratum 1024718

Ard Biesheuvel <[email protected]>
ACPI / button: make module loadable when booted in non-ACPI mode

-------------

Diffstat:

 Documentation/arm64/silicon-errata.txt             |   1 +
 Makefile                                           |   4 +-
 arch/arm64/Kconfig                                 |  14 +
 arch/arm64/include/asm/assembler.h                 |  40 ++
 arch/arm64/include/asm/cputype.h                   |   2 +
 arch/arm64/mm/proc.S                               |   5 +
 arch/x86/kernel/tsc.c                              |  22 +-
 arch/x86/kvm/lapic.c                               |  37 +-
 drivers/acpi/button.c                              |  24 +-
 drivers/gpu/drm/bridge/dumb-vga-dac.c              |   4 +-
 drivers/gpu/drm/vc4/vc4_crtc.c                     |  46 ++-
 drivers/gpu/drm/vmwgfx/vmwgfx_kms.c                |   1 +
 drivers/infiniband/core/ucma.c                     |   2 +-
 drivers/infiniband/hw/cxgb4/cq.c                   |  11 +-
 drivers/infiniband/hw/cxgb4/device.c               |   9 +-
 drivers/infiniband/hw/cxgb4/iw_cxgb4.h             |   6 +-
 drivers/infiniband/hw/cxgb4/qp.c                   |   4 +-
 drivers/infiniband/hw/cxgb4/resource.c             |  26 +-
 drivers/infiniband/hw/hfi1/driver.c                |  19 +-
 drivers/infiniband/hw/hfi1/hfi.h                   |   8 +-
 drivers/infiniband/hw/hfi1/init.c                  |   2 +
 drivers/infiniband/hw/hfi1/pcie.c                  |   3 -
 drivers/infiniband/hw/hfi1/ruc.c                   |  50 ++-
 drivers/infiniband/hw/hfi1/ud.c                    |   4 +-
 drivers/infiniband/hw/mlx4/qp.c                    |   3 +-
 drivers/infiniband/hw/mlx5/Kconfig                 |   1 +
 drivers/infiniband/hw/mlx5/mr.c                    |  32 +-
 drivers/infiniband/hw/mlx5/qp.c                    |  22 +-
 drivers/input/input-leds.c                         |   8 +-
 drivers/input/touchscreen/atmel_mxt_ts.c           |   9 +
 drivers/irqchip/qcom-irq-combiner.c                |   4 +-
 drivers/net/usb/qmi_wwan.c                         |   1 +
 .../realtek/rtlwifi/btcoexist/halbtcoutsrc.c       |  15 -
 .../net/wireless/realtek/rtlwifi/rtl8723be/hw.c    |  11 +-
 drivers/net/wireless/realtek/rtlwifi/wifi.h        |   5 +
 drivers/platform/x86/Kconfig                       |   2 +-
 drivers/platform/x86/asus-wireless.c               |   4 +-
 drivers/target/target_core_iblock.c                |   8 +-
 drivers/usb/core/config.c                          |   4 +-
 drivers/usb/dwc3/gadget.c                          |   2 +-
 drivers/usb/host/xhci.c                            |   1 +
 drivers/usb/musb/musb_gadget.c                     |   3 +-
 drivers/usb/musb/musb_host.c                       |   4 +-
 drivers/usb/serial/option.c                        | 451 +++++++--------------
 drivers/usb/serial/visor.c                         |  69 ++--
 fs/btrfs/extent-tree.c                             |   7 +
 fs/xfs/xfs_file.c                                  |  14 +-
 kernel/time/clocksource.c                          |  57 ++-
 kernel/trace/trace_uprobe.c                        |  24 +-
 kernel/tracepoint.c                                |   4 +-
 lib/errseq.c                                       |  23 +-
 lib/swiotlb.c                                      |   2 +-
 sound/core/pcm_compat.c                            |   2 +
 sound/core/seq/seq_virmidi.c                       |   4 +-
 sound/drivers/aloop.c                              |  29 +-
 sound/firewire/amdtp-stream.c                      |   5 +-
 sound/pci/hda/patch_realtek.c                      |   2 +-
 tools/power/acpi/Makefile.config                   |   1 +
 tools/testing/selftests/firmware/fw_filesystem.sh  |   6 +-
 59 files changed, 674 insertions(+), 509 deletions(-)
author maintainer
#1 lore raw

PATCH 1/52 ACPI / button: make module loadable when booted in non-ACPI mode

4.16-stable review patch. If anyone has any objections, please let me know.

------------------

From: Ard Biesheuvel <[email protected]>

commit ac1e55b1fdb27c1b07a0a6fe519f1291ff1e7d40 upstream.

Modules such as nouveau.ko and i915.ko have a link time dependency on acpi_lid_open(), and due to its use of acpi_bus_register_driver(), the button.ko module that provides it is only loadable when booted in ACPI mode. However, the ACPI button driver can be built into the core kernel as well, in which case the dependency can always be satisfied, and the dependent modules can be loaded regardless of whether the system was booted in ACPI mode or not.

So let's fix this asymmetry by making the ACPI button driver loadable as a module even if not booted in ACPI mode, so it can provide the acpi_lid_open() symbol in the same way as when built into the kernel.

[ rjw: Minor adjustments of comments, whitespace and names. ]
---
 drivers/acpi/button.c |   24 +++++++++++++++++++++++-
 1 file changed, 23 insertions(+), 1 deletion(-)
drivers/acpi/button.c +23 -1
@@ -635,4 +635,26 @@ module_param_call(lid_init_state,
 		  NULL, 0644);
 MODULE_PARM_DESC(lid_init_state, "Behavior for reporting LID initial state");
 
-module_acpi_driver(acpi_button_driver);
+static int acpi_button_register_driver(struct acpi_driver *driver)
+{
+	/*
+	 * Modules such as nouveau.ko and i915.ko have a link time dependency
+	 * on acpi_lid_open(), and would therefore not be loadable on ACPI
+	 * capable kernels booted in non-ACPI mode if the return value of
+	 * acpi_bus_register_driver() is returned from here with ACPI disabled
+	 * when this driver is built as a module.
+	 */
+	if (acpi_disabled)
+		return 0;
+
+	return acpi_bus_register_driver(driver);
+}
+
+static void acpi_button_unregister_driver(struct acpi_driver *driver)
+{
+	if (!acpi_disabled)
+		acpi_bus_unregister_driver(driver);
+}
+
+module_driver(acpi_button_driver, acpi_button_register_driver,
+	       acpi_button_unregister_driver);
author maintainer
#2 lore raw

PATCH 2/52 arm64: Add work around for Arm Cortex-A55 Erratum 1024718

In reply to Greg Kroah-Hartman

4.16-stable review patch. If anyone has any objections, please let me know.

------------------

From: Suzuki K Poulose <[email protected]>

commit ece1397cbc89c51914fae1aec729539cfd8bd62b upstream.

Some variants of the Arm Cortex-55 cores (r0p0, r0p1, r1p0) suffer from an erratum 1024718, which causes incorrect updates when DBM/AP bits in a page table entry is modified without a break-before-make sequence. The work around is to skip enabling the hardware DBM feature on the affected cores. The hardware Access Flag management features is not affected. There are some other cores suffering from this errata, which could be added to the midr_list to trigger the work around.

---
 Documentation/arm64/silicon-errata.txt |    1 
 arch/arm64/Kconfig                     |   14 +++++++++++
 arch/arm64/include/asm/assembler.h     |   40 +++++++++++++++++++++++++++++++++
 arch/arm64/include/asm/cputype.h       |    2 +
 arch/arm64/mm/proc.S                   |    5 ++++
 5 files changed, 62 insertions(+)
Documentation/arm64/silicon-errata.txt +1 -0
@@ -55,6 +55,7 @@ stable kernels.
 | ARM            | Cortex-A57      | #834220         | ARM64_ERRATUM_834220        |
 | ARM            | Cortex-A72      | #853709         | N/A                         |
 | ARM            | Cortex-A73      | #858921         | ARM64_ERRATUM_858921        |
+| ARM            | Cortex-A55      | #1024718        | ARM64_ERRATUM_1024718       |
 | ARM            | MMU-500         | #841119,#826419 | N/A                         |
 |                |                 |                 |                             |
 | Cavium         | ThunderX ITS    | #22375, #24313  | CAVIUM_ERRATUM_22375        |
arch/arm64/Kconfig +14 -0
@@ -464,6 +464,20 @@ config ARM64_ERRATUM_843419
 
 	  If unsure, say Y.
 
+config ARM64_ERRATUM_1024718
+	bool "Cortex-A55: 1024718: Update of DBM/AP bits without break before make might result in incorrect update"
+	default y
+	help
+	  This option adds work around for Arm Cortex-A55 Erratum 1024718.
+
+	  Affected Cortex-A55 cores (r0p0, r0p1, r1p0) could cause incorrect
+	  update of the hardware dirty bit when the DBM/AP bits are updated
+	  without a break-before-make. The work around is to disable the usage
+	  of hardware DBM locally on the affected cores. CPUs not affected by
+	  erratum will continue to use the feature.
+
+	  If unsure, say Y.
+
 config CAVIUM_ERRATUM_22375
 	bool "Cavium erratum 22375, 24313"
 	default y
arch/arm64/include/asm/assembler.h +40 -0
@@ -25,6 +25,7 @@
 
 #include <asm/asm-offsets.h>
 #include <asm/cpufeature.h>
+#include <asm/cputype.h>
 #include <asm/debug-monitors.h>
 #include <asm/page.h>
 #include <asm/pgtable-hwdef.h>
@@ -595,4 +596,43 @@ USER(\label, ic	ivau, \tmp2)			// invali
 #endif
 	.endm
 
+/*
+ * Check the MIDR_EL1 of the current CPU for a given model and a range of
+ * variant/revision. See asm/cputype.h for the macros used below.
+ *
+ *	model:		MIDR_CPU_MODEL of CPU
+ *	rv_min:		Minimum of MIDR_CPU_VAR_REV()
+ *	rv_max:		Maximum of MIDR_CPU_VAR_REV()
+ *	res:		Result register.
+ *	tmp1, tmp2, tmp3: Temporary registers
+ *
+ * Corrupts: res, tmp1, tmp2, tmp3
+ * Returns:  0, if the CPU id doesn't match. Non-zero otherwise
+ */
+	.macro	cpu_midr_match model, rv_min, rv_max, res, tmp1, tmp2, tmp3
+	mrs		\res, midr_el1
+	mov_q		\tmp1, (MIDR_REVISION_MASK | MIDR_VARIANT_MASK)
+	mov_q		\tmp2, MIDR_CPU_MODEL_MASK
+	and		\tmp3, \res, \tmp2	// Extract model
+	and		\tmp1, \res, \tmp1	// rev & variant
+	mov_q		\tmp2, \model
+	cmp		\tmp3, \tmp2
+	cset		\res, eq
+	cbz		\res, .Ldone\@		// Model matches ?
+
+	.if (\rv_min != 0)			// Skip min check if rv_min == 0
+	mov_q		\tmp3, \rv_min
+	cmp		\tmp1, \tmp3
+	cset		\res, ge
+	.endif					// \rv_min != 0
+	/* Skip rv_max check if rv_min == rv_max && rv_min != 0 */
+	.if ((\rv_min != \rv_max) || \rv_min == 0)
+	mov_q		\tmp2, \rv_max
+	cmp		\tmp1, \tmp2
+	cset		\tmp2, le
+	and		\res, \res, \tmp2
+	.endif
+.Ldone\@:
+	.endm
+
 #endif	/* __ASM_ASSEMBLER_H */
arch/arm64/include/asm/cputype.h +2 -0
@@ -83,6 +83,7 @@
 #define ARM_CPU_PART_CORTEX_A53		0xD03
 #define ARM_CPU_PART_CORTEX_A73		0xD09
 #define ARM_CPU_PART_CORTEX_A75		0xD0A
+#define ARM_CPU_PART_CORTEX_A55		0xD05
 
 #define APM_CPU_PART_POTENZA		0x000
 
@@ -102,6 +103,7 @@
 #define MIDR_CORTEX_A72 MIDR_CPU_MODEL(ARM_CPU_IMP_ARM, ARM_CPU_PART_CORTEX_A72)
 #define MIDR_CORTEX_A73 MIDR_CPU_MODEL(ARM_CPU_IMP_ARM, ARM_CPU_PART_CORTEX_A73)
 #define MIDR_CORTEX_A75 MIDR_CPU_MODEL(ARM_CPU_IMP_ARM, ARM_CPU_PART_CORTEX_A75)
+#define MIDR_CORTEX_A55 MIDR_CPU_MODEL(ARM_CPU_IMP_ARM, ARM_CPU_PART_CORTEX_A55)
 #define MIDR_THUNDERX	MIDR_CPU_MODEL(ARM_CPU_IMP_CAVIUM, CAVIUM_CPU_PART_THUNDERX)
 #define MIDR_THUNDERX_81XX MIDR_CPU_MODEL(ARM_CPU_IMP_CAVIUM, CAVIUM_CPU_PART_THUNDERX_81XX)
 #define MIDR_THUNDERX_83XX MIDR_CPU_MODEL(ARM_CPU_IMP_CAVIUM, CAVIUM_CPU_PART_THUNDERX_83XX)
arch/arm64/mm/proc.S +5 -0
@@ -448,6 +448,11 @@ ENTRY(__cpu_setup)
 	cbz	x9, 2f
 	cmp	x9, #2
 	b.lt	1f
+#ifdef CONFIG_ARM64_ERRATUM_1024718
+	/* Disable hardware DBM on Cortex-A55 r0p0, r0p1 & r1p0 */
+	cpu_midr_match MIDR_CORTEX_A55, MIDR_CPU_VAR_REV(0, 0), MIDR_CPU_VAR_REV(1, 0), x1, x2, x3, x4
+	cbnz	x1, 1f
+#endif
 	orr	x10, x10, #TCR_HD		// hardware Dirty flag update
 1:	orr	x10, x10, #TCR_HA		// hardware Access flag update
 2:
author maintainer
#3 lore raw

PATCH 3/52 ALSA: hda - Fix incorrect usage of IS_REACHABLE()

In reply to Greg Kroah-Hartman

4.16-stable review patch. If anyone has any objections, please let me know.

------------------

From: Takashi Iwai <[email protected]>

commit 6a30abaa40b62aed46ef12ea4c16c48565bdb376 upstream.

The commit c469652bb5e8 ("ALSA: hda - Use IS_REACHABLE() for dependency on input") simplified the dependencies with IS_REACHABLE() macro, but it broke due to its incorrect usage: it should have been IS_REACHABLE(CONFIG_INPUT) instead of IS_REACHABLE(INPUT).

Fixes c469652bb5e8 ("ALSA: hda - Use IS_REACHABLE() for dependency on input")
---
 sound/pci/hda/patch_realtek.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
sound/pci/hda/patch_realtek.c +1 -1
@@ -3832,7 +3832,7 @@ static void alc280_fixup_hp_gpio4(struct
 	}
 }
 
-#if IS_REACHABLE(INPUT)
+#if IS_REACHABLE(CONFIG_INPUT)
 static void gpio2_mic_hotkey_event(struct hda_codec *codec,
 				   struct hda_jack_callback *event)
 {
author maintainer
#4 lore raw

PATCH 4/52 ALSA: pcm: Check PCM state at xfern compat ioctl

In reply to Greg Kroah-Hartman

4.16-stable review patch. If anyone has any objections, please let me know.

------------------

From: Takashi Iwai <[email protected]>

commit f13876e2c33a657a71bcbb10f767c0951b165020 upstream.

Since snd_pcm_ioctl_xfern_compat() has no PCM state check, it may go further and hit the sanity check pcm_sanity_check() when the ioctl is called right after open. It may eventually spew a kernel warning, as triggered by syzbot, depending on kconfig.

The lack of PCM state check there was just an oversight. Although it's no real crash, the spurious kernel warning is annoying, so let's add the proper check.

---
 sound/core/pcm_compat.c |    2 ++
 1 file changed, 2 insertions(+)
sound/core/pcm_compat.c +2 -0
@@ -423,6 +423,8 @@ static int snd_pcm_ioctl_xfern_compat(st
 		return -ENOTTY;
 	if (substream->stream != dir)
 		return -EINVAL;
+	if (substream->runtime->status->state == SNDRV_PCM_STATE_OPEN)
+		return -EBADFD;
 
 	if ((ch = substream->runtime->channels) > 128)
 		return -EINVAL;
author maintainer
#5 lore raw

PATCH 5/52 ALSA: seq: Fix races at MIDI encoding in snd_virmidi_output_trigger()

In reply to Greg Kroah-Hartman

4.16-stable review patch. If anyone has any objections, please let me know.

------------------

From: Takashi Iwai <[email protected]>

commit 8f22e52528cc372b218b5f100457469615c733ce upstream.

The sequencer virmidi code has an open race at its output trigger
callback: namely, virmidi keeps only one event packet for processing while it doesn't protect for concurrent output trigger calls.

snd_virmidi_output_trigger() tries to process the previously unfinished event before starting encoding the given MIDI stream, but this is done without any lock. Meanwhile, if another rawmidi stream starts the output trigger, this proceeds further, and overwrites the event package that is being processed in another thread. This eventually corrupts and may lead to the invalid memory access if the event type is like SYSEX.

The fix is just to move the spinlock to cover both the pending event and the new stream.

The bug was spotted by a new fuzzer, RaceFuzzer.

---
 sound/core/seq/seq_virmidi.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
sound/core/seq/seq_virmidi.c +2 -2
@@ -174,12 +174,12 @@ static void snd_virmidi_output_trigger(s
 			}
 			return;
 		}
+		spin_lock_irqsave(&substream->runtime->lock, flags);
 		if (vmidi->event.type != SNDRV_SEQ_EVENT_NONE) {
 			if (snd_seq_kernel_client_dispatch(vmidi->client, &vmidi->event, in_atomic(), 0) < 0)
-				return;
+				goto out;
 			vmidi->event.type = SNDRV_SEQ_EVENT_NONE;
 		}
-		spin_lock_irqsave(&substream->runtime->lock, flags);
 		while (1) {
 			count = __snd_rawmidi_transmit_peek(substream, buf, sizeof(buf));
 			if (count <= 0)
author maintainer
#6 lore raw

PATCH 6/52 ALSA: dice: fix kernel NULL pointer dereference due to invalid calculation for array index

In reply to Greg Kroah-Hartman

4.16-stable review patch. If anyone has any objections, please let me know.

------------------

From: Takashi Sakamoto <[email protected]>

commit 52759c0963510a2843774aac9b65ccaed3308dc0 upstream.

At a commit f91c9d7610a ('ALSA: firewire-lib: cache maximum length of payload to reduce function calls'), maximum size of payload for tx isochronous packet is cached to reduce the number of function calls.

This cache was programmed to updated at a first callback of ohci1394 IR context. However, the maximum size is required to queueing packets before starting the isochronous context.

As a result, the cached value is reused to queue packets in next time to starting the isochronous context. Then the cache is updated in a first callback of the isochronous context. This can cause kernel NULL pointer dereference in a below call graph:

(sound/firewire/amdtp-stream.c)
amdtp_stream_start()
->queue_in_packet()
->queue_packet()

    (drivers/firewire/core-iso.c)
    ->fw_iso_context_queue()
      ->struct fw_card_driver.queue_iso()
      (drivers/firewire/ohci.c)
      = ohci_queue_iso()
        ->queue_iso_packet_per_buffer()
          buffer->pages[page]

The issued dereference occurs in a case that:
- target unit supports different stream formats for sampling transmission frequency.
- maximum length of payload for tx stream in a first trial is bigger than the length in a second trial.

In this case, correct number of pages are allocated for DMA and the 'pages' array has enough elements, while index of the element is wrongly calculated according to the old value of length of payload in a call of 'queue_in_packet()'. Then it causes the issue.

This commit fixes the critical bug. This affects all of drivers in ALSA firewire stack in Linux kernel v4.12 or later.

[12665.302360] BUG: unable to handle kernel NULL pointer dereference at 0000000000000030
[12665.302415] IP: ohci_queue_iso+0x47c/0x800 [firewire_ohci]
[12665.302439] PGD 0
[12665.302440] P4D 0
[12665.302450]
[12665.302470] Oops: 0000 [#1] SMP PTI
[12665.302487] Modules linked in: ...
[12665.303096] CPU: 1 PID: 12760 Comm: jackd Tainted: P           OE   4.13.0-38-generic #43-Ubuntu
[12665.303154] Hardware name:                  /DH77DF, BIOS KCH7710H.86A.0069.2012.0224.1825 02/24/2012
[12665.303215] task: ffff9ce87da2ae80 task.stack: ffffb5b8823d0000
[12665.303258] RIP: 0010:ohci_queue_iso+0x47c/0x800 [firewire_ohci]
[12665.303301] RSP: 0018:ffffb5b8823d3ab8 EFLAGS: 00010086
[12665.303337] RAX: ffff9ce4f4876930 RBX: 0000000000000008 RCX: ffff9ce88a3955e0
[12665.303384] RDX: 0000000000000000 RSI: 0000000034877f00 RDI: 0000000000000000
[12665.303427] RBP: ffffb5b8823d3b68 R08: ffff9ce8ccb390a0 R09: ffff9ce877639ab0
[12665.303475] R10: 0000000000000108 R11: 0000000000000000 R12: 0000000000000003
[12665.303513] R13: 0000000000000000 R14: ffff9ce4f4876950 R15: 0000000000000000
[12665.303554] FS:  00007f2ec467f8c0(0000) GS:ffff9ce8df280000(0000) knlGS:0000000000000000
[12665.303600] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[12665.303633] CR2: 0000000000000030 CR3: 00000002dcf90004 CR4: 00000000000606e0
[12665.303674] Call Trace:
[12665.303698]  fw_iso_context_queue+0x18/0x20 [firewire_core]
[12665.303735]  queue_packet+0x88/0xe0 [snd_firewire_lib]
[12665.303770]  amdtp_stream_start+0x19b/0x270 [snd_firewire_lib]
[12665.303811]  start_streams+0x276/0x3c0 [snd_dice]
[12665.303840]  snd_dice_stream_start_duplex+0x1bf/0x480 [snd_dice]
[12665.303882]  ? vma_gap_callbacks_rotate+0x1e/0x30
[12665.303914]  ? __rb_insert_augmented+0xab/0x240
[12665.303936]  capture_prepare+0x3c/0x70 [snd_dice]
[12665.303961]  snd_pcm_do_prepare+0x1d/0x30 [snd_pcm]
[12665.303985]  snd_pcm_action_single+0x3b/0x90 [snd_pcm]
[12665.304009]  snd_pcm_action_nonatomic+0x68/0x70 [snd_pcm]
[12665.304035]  snd_pcm_prepare+0x68/0x90 [snd_pcm]
[12665.304058]  snd_pcm_common_ioctl1+0x4c0/0x940 [snd_pcm]
[12665.304083]  snd_pcm_capture_ioctl1+0x19b/0x250 [snd_pcm]
[12665.304108]  snd_pcm_capture_ioctl+0x27/0x40 [snd_pcm]
[12665.304131]  do_vfs_ioctl+0xa8/0x630
[12665.304148]  ? entry_SYSCALL_64_after_hwframe+0xe9/0x139
[12665.304172]  ? entry_SYSCALL_64_after_hwframe+0xe2/0x139
[12665.304195]  ? entry_SYSCALL_64_after_hwframe+0xdb/0x139
[12665.304218]  ? entry_SYSCALL_64_after_hwframe+0xd4/0x139
[12665.304242]  ? entry_SYSCALL_64_after_hwframe+0xcd/0x139
[12665.304265]  ? entry_SYSCALL_64_after_hwframe+0xc6/0x139
[12665.304288]  ? entry_SYSCALL_64_after_hwframe+0xbf/0x139
[12665.304312]  ? entry_SYSCALL_64_after_hwframe+0xb8/0x139
[12665.304335]  ? entry_SYSCALL_64_after_hwframe+0xb1/0x139
[12665.304358]  SyS_ioctl+0x79/0x90
[12665.304374]  ? entry_SYSCALL_64_after_hwframe+0x72/0x139
[12665.304397]  entry_SYSCALL_64_fastpath+0x24/0xab
[12665.304417] RIP: 0033:0x7f2ec3750ef7
[12665.304433] RSP: 002b:00007fff99e31388 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
[12665.304465] RAX: ffffffffffffffda RBX: 00007fff99e312f0 RCX: 00007f2ec3750ef7
[12665.304494] RDX: 0000000000000000 RSI: 0000000000004140 RDI: 0000000000000007
[12665.304522] RBP: 0000556ebc63fd60 R08: 0000556ebc640560 R09: 0000000000000000
[12665.304553] R10: 0000000000000001 R11: 0000000000000246 R12: 0000556ebc63fcf0
[12665.304584] R13: 0000000000000000 R14: 0000000000000007 R15: 0000000000000000
[12665.304612] Code: 01 00 00 44 89 eb 45 31 ed 45 31 db 66 41 89 1e 66 41 89 5e 0c 66 45 89 5e 0e 49 8b 49 08 49 63 d4 4d 85 c0 49 63 ff 48 8b 14 d1 <48> 8b 72 30 41 8d 14 37 41 89 56 04 48 63 d3 0f 84 ce 00 00 00
[12665.304713] RIP: ohci_queue_iso+0x47c/0x800 [firewire_ohci] RSP: ffffb5b8823d3ab8
[12665.304743] CR2: 0000000000000030
[12665.317701] ---[ end trace 9d55b056dd52a19f ]---
Fixes f91c9d7610a ('ALSA: firewire-lib: cache maximum length of payload to reduce function calls')
Cc <[email protected]> # v4.12+
---
 sound/firewire/amdtp-stream.c |    5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)
sound/firewire/amdtp-stream.c +3 -2
@@ -773,8 +773,6 @@ static void amdtp_stream_first_callback(
 	u32 cycle;
 	unsigned int packets;
 
-	s->max_payload_length = amdtp_stream_get_max_payload(s);
-
 	/*
 	 * For in-stream, first packet has come.
 	 * For out-stream, prepared to transmit first packet
@@ -879,6 +877,9 @@ int amdtp_stream_start(struct amdtp_stre
 
 	amdtp_stream_update(s);
 
+	if (s->direction == AMDTP_IN_STREAM)
+		s->max_payload_length = amdtp_stream_get_max_payload(s);
+
 	if (s->flags & CIP_NO_HEADER)
 		s->tag = TAG_NO_CIP_HEADER;
 	else
author maintainer
#7 lore raw

PATCH 7/52 ALSA: aloop: Mark paused device as inactive

In reply to Greg Kroah-Hartman

4.16-stable review patch. If anyone has any objections, please let me know.

------------------

From: Robert Rosengren <[email protected]>

commit 306a4f3ca7f3c7dfa473ebd19d66e40e59d99734 upstream.

Show paused ALSA aloop device as inactive, i.e. the control "PCM Slave Active" set as false. Notification sent upon state change.

This makes it possible for client capturing from aloop device to know if data is expected. Without it the client expects data even if playback is paused.

---
 sound/drivers/aloop.c |   12 +++++++++---
 1 file changed, 9 insertions(+), 3 deletions(-)
sound/drivers/aloop.c +9 -3
@@ -296,6 +296,8 @@ static int loopback_trigger(struct snd_p
 		cable->pause |= stream;
 		loopback_timer_stop(dpcm);
 		spin_unlock(&cable->lock);
+		if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
+			loopback_active_notify(dpcm);
 		break;
 	case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
 	case SNDRV_PCM_TRIGGER_RESUME:
@@ -304,6 +306,8 @@ static int loopback_trigger(struct snd_p
 		cable->pause &= ~stream;
 		loopback_timer_start(dpcm);
 		spin_unlock(&cable->lock);
+		if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
+			loopback_active_notify(dpcm);
 		break;
 	default:
 		return -EINVAL;
@@ -892,9 +896,11 @@ static int loopback_active_get(struct sn
 			[kcontrol->id.subdevice][kcontrol->id.device ^ 1];
 	unsigned int val = 0;
 
-	if (cable != NULL)
-		val = (cable->running & (1 << SNDRV_PCM_STREAM_PLAYBACK)) ?
-									1 : 0;
+	if (cable != NULL) {
+		unsigned int running = cable->running ^ cable->pause;
+
+		val = (running & (1 << SNDRV_PCM_STREAM_PLAYBACK)) ? 1 : 0;
+	}
 	ucontrol->value.integer.value[0] = val;
 	return 0;
 }
author maintainer
#8 lore raw

PATCH 8/52 ALSA: aloop: Add missing cable lock to ctl API callbacks

In reply to Greg Kroah-Hartman

4.16-stable review patch. If anyone has any objections, please let me know.

------------------

From: Takashi Iwai <[email protected]>

commit 76b3421b39bd610546931fc923edcf90c18fa395 upstream.

Some control API callbacks in aloop driver are too lazy to take the loopback->cable_lock and it results in possible races of cable access while it's being freed. It eventually lead to a UAF, as reported by fuzzer recently.

This patch covers such control API callbacks and add the proper mutex locks.

---
 sound/drivers/aloop.c |   17 +++++++++++++++--
 1 file changed, 15 insertions(+), 2 deletions(-)
sound/drivers/aloop.c +15 -2
@@ -831,9 +831,11 @@ static int loopback_rate_shift_get(struc
 {
 	struct loopback *loopback = snd_kcontrol_chip(kcontrol);
 	
+	mutex_lock(&loopback->cable_lock);
 	ucontrol->value.integer.value[0] =
 		loopback->setup[kcontrol->id.subdevice]
 			       [kcontrol->id.device].rate_shift;
+	mutex_unlock(&loopback->cable_lock);
 	return 0;
 }
 
@@ -865,9 +867,11 @@ static int loopback_notify_get(struct sn
 {
 	struct loopback *loopback = snd_kcontrol_chip(kcontrol);
 	
+	mutex_lock(&loopback->cable_lock);
 	ucontrol->value.integer.value[0] =
 		loopback->setup[kcontrol->id.subdevice]
 			       [kcontrol->id.device].notify;
+	mutex_unlock(&loopback->cable_lock);
 	return 0;
 }
 
@@ -879,12 +883,14 @@ static int loopback_notify_put(struct sn
 	int change = 0;
 
 	val = ucontrol->value.integer.value[0] ? 1 : 0;
+	mutex_lock(&loopback->cable_lock);
 	if (val != loopback->setup[kcontrol->id.subdevice]
 				[kcontrol->id.device].notify) {
 		loopback->setup[kcontrol->id.subdevice]
 			[kcontrol->id.device].notify = val;
 		change = 1;
 	}
+	mutex_unlock(&loopback->cable_lock);
 	return change;
 }
 
@@ -892,15 +898,18 @@ static int loopback_active_get(struct sn
 			       struct snd_ctl_elem_value *ucontrol)
 {
 	struct loopback *loopback = snd_kcontrol_chip(kcontrol);
-	struct loopback_cable *cable = loopback->cables
-			[kcontrol->id.subdevice][kcontrol->id.device ^ 1];
+	struct loopback_cable *cable;
+
 	unsigned int val = 0;
 
+	mutex_lock(&loopback->cable_lock);
+	cable = loopback->cables[kcontrol->id.subdevice][kcontrol->id.device ^ 1];
 	if (cable != NULL) {
 		unsigned int running = cable->running ^ cable->pause;
 
 		val = (running & (1 << SNDRV_PCM_STREAM_PLAYBACK)) ? 1 : 0;
 	}
+	mutex_unlock(&loopback->cable_lock);
 	ucontrol->value.integer.value[0] = val;
 	return 0;
 }
@@ -943,9 +952,11 @@ static int loopback_rate_get(struct snd_
 {
 	struct loopback *loopback = snd_kcontrol_chip(kcontrol);
 	
+	mutex_lock(&loopback->cable_lock);
 	ucontrol->value.integer.value[0] =
 		loopback->setup[kcontrol->id.subdevice]
 			       [kcontrol->id.device].rate;
+	mutex_unlock(&loopback->cable_lock);
 	return 0;
 }
 
@@ -965,9 +976,11 @@ static int loopback_channels_get(struct
 {
 	struct loopback *loopback = snd_kcontrol_chip(kcontrol);
 	
+	mutex_lock(&loopback->cable_lock);
 	ucontrol->value.integer.value[0] =
 		loopback->setup[kcontrol->id.subdevice]
 			       [kcontrol->id.device].channels;
+	mutex_unlock(&loopback->cable_lock);
 	return 0;
 }
 
author maintainer
#9 lore raw

PATCH 9/52 errseq: Always report a writeback error once

In reply to Greg Kroah-Hartman

4.16-stable review patch. If anyone has any objections, please let me know.

------------------

From: Matthew Wilcox <[email protected]>

commit b4678df184b314a2bd47d2329feca2c2534aa12b upstream.

The errseq_t infrastructure assumes that errors which occurred before the file descriptor was opened are of no interest to the application. This turns out to be a regression for some applications, notably Postgres.

Before errseq_t, a writeback error would be reported exactly once (as long as the inode remained in memory), so Postgres could open a file, call fsync() and find out whether there had been a writeback error on that file from another process.

This patch changes the errseq infrastructure to report errors to all file descriptors which are opened after the error occurred, but before it was reported to any file descriptor. This restores the user-visible behaviour.

Fixes 5660e13d2fd6 ("fs: new infrastructure for writeback error handling and reporting")
---
 lib/errseq.c |   23 +++++++++--------------
 1 file changed, 9 insertions(+), 14 deletions(-)
lib/errseq.c +9 -14
@@ -111,27 +111,22 @@ EXPORT_SYMBOL(errseq_set);
  * errseq_sample() - Grab current errseq_t value.
  * @eseq: Pointer to errseq_t to be sampled.
  *
- * This function allows callers to sample an errseq_t value, marking it as
- * "seen" if required.
+ * This function allows callers to initialise their errseq_t variable.
+ * If the error has been "seen", new callers will not see an old error.
+ * If there is an unseen error in @eseq, the caller of this function will
+ * see it the next time it checks for an error.
  *
+ * Context: Any context.
  * Return: The current errseq value.
  */
 errseq_t errseq_sample(errseq_t *eseq)
 {
 	errseq_t old = READ_ONCE(*eseq);
-	errseq_t new = old;
 
-	/*
-	 * For the common case of no errors ever having been set, we can skip
-	 * marking the SEEN bit. Once an error has been set, the value will
-	 * never go back to zero.
-	 */
-	if (old != 0) {
-		new |= ERRSEQ_SEEN;
-		if (old != new)
-			cmpxchg(eseq, old, new);
-	}
-	return new;
+	/* If nobody has seen this error yet, then we can be the first. */
+	if (!(old & ERRSEQ_SEEN))
+		old = 0;
+	return old;
 }
 EXPORT_SYMBOL(errseq_sample);
 
author maintainer
#10 lore raw

PATCH 10/52 tracepoint: Do not warn on ENOMEM

In reply to Greg Kroah-Hartman

4.16-stable review patch. If anyone has any objections, please let me know.

------------------

From: Mathieu Desnoyers <[email protected]>

commit d66a270be3310d7aa132fec0cea77d3d32a0ff75 upstream.

Tracepoint should only warn when a kernel API user does not respect the required preconditions (e.g. same tracepoint enabled twice, or called to remove a tracepoint that does not exist).

Silence warning in out-of-memory conditions, given that the error is returned to the caller.

This ensures that out-of-memory error-injection testing does not trigger warnings in tracepoint.c, which were seen by syzbot.

CC Peter Zijlstra <[email protected]>
CC Jiri Olsa <[email protected]>
CC Arnaldo Carvalho de Melo <[email protected]>
CC Alexander Shishkin <[email protected]>
CC Namhyung Kim <[email protected]>
Fixes de7b2973903c6 ("tracepoint: Use struct pointer instead of name hash for reg/unreg tracepoints")
Reported-by [email protected]
Reported-by [email protected]
---
 kernel/tracepoint.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
kernel/tracepoint.c +2 -2
@@ -207,7 +207,7 @@ static int tracepoint_add_func(struct tr
 			lockdep_is_held(&tracepoints_mutex));
 	old = func_add(&tp_funcs, func, prio);
 	if (IS_ERR(old)) {
-		WARN_ON_ONCE(1);
+		WARN_ON_ONCE(PTR_ERR(old) != -ENOMEM);
 		return PTR_ERR(old);
 	}
 
@@ -239,7 +239,7 @@ static int tracepoint_remove_func(struct
 			lockdep_is_held(&tracepoints_mutex));
 	old = func_remove(&tp_funcs, func);
 	if (IS_ERR(old)) {
-		WARN_ON_ONCE(1);
+		WARN_ON_ONCE(PTR_ERR(old) != -ENOMEM);
 		return PTR_ERR(old);
 	}
 
author maintainer
#11 lore raw

PATCH 11/52 scsi: target: Fix fortify_panic kernel exception

In reply to Greg Kroah-Hartman

4.16-stable review patch. If anyone has any objections, please let me know.

------------------

From: Bryant G Ly <[email protected]>

commit f5957dade4f373b04fa1f5315a489f18cc2c4cb4 upstream.

memcmp() requires the two buffers passed as arguments to be at least 'size' bytes long, otherwise a fortify_panic will trigger.

Use memchr_inv() instead of memcmp() to determine whether the received payload is zeroed or not.

The bug was found by running a block backstore via LIO.

[  496.212958] Call Trace:
[  496.212960] [c0000007e58e3800] [c000000000cbbefc] fortify_panic+0x24/0x38 (unreliable)
[  496.212965] [c0000007e58e3860] [d00000000f150c28] iblock_execute_write_same+0x3b8/0x3c0 [target_core_iblock]
[  496.212976] [c0000007e58e3910] [d000000006c737d4] __target_execute_cmd+0x54/0x150 [target_core_mod]
[  496.212982] [c0000007e58e3940] [d000000006d32ce4] ibmvscsis_write_pending+0x74/0xe0 [ibmvscsis]
[  496.212991] [c0000007e58e39b0] [d000000006c74fc8] transport_generic_new_cmd+0x318/0x370 [target_core_mod]
[  496.213001] [c0000007e58e3a30] [d000000006c75084] transport_handle_cdb_direct+0x64/0xd0 [target_core_mod]
[  496.213011] [c0000007e58e3aa0] [d000000006c75298] target_submit_cmd_map_sgls+0x1a8/0x320 [target_core_mod]
[  496.213021] [c0000007e58e3b30] [d000000006c75458] target_submit_cmd+0x48/0x60 [target_core_mod]
[  496.213026] [c0000007e58e3bd0] [d000000006d34c20] ibmvscsis_scheduler+0x370/0x600 [ibmvscsis]
[  496.213031] [c0000007e58e3c90] [c00000000013135c] process_one_work+0x1ec/0x580
[  496.213035] [c0000007e58e3d20] [c000000000131798] worker_thread+0xa8/0x600
[  496.213039] [c0000007e58e3dc0] [c00000000013a468] kthread+0x168/0x1b0
[  496.213044] [c0000007e58e3e30] [c00000000000b528] ret_from_kernel_thread+0x5c/0xb4

[mkp: tweaked commit message]

Fixes 2237498f0b5c ("target/iblock: Convert WRITE_SAME to blkdev_issue_zeroout")
Cc Christoph Hellwig <[email protected]>
Cc Nicholas Bellinger <[email protected]>
Cc <[email protected]> # v4.13+
---
 drivers/target/target_core_iblock.c |    8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)
drivers/target/target_core_iblock.c +4 -4
@@ -427,8 +427,8 @@ iblock_execute_zero_out(struct block_dev
 {
 	struct se_device *dev = cmd->se_dev;
 	struct scatterlist *sg = &cmd->t_data_sg[0];
-	unsigned char *buf, zero = 0x00, *p = &zero;
-	int rc, ret;
+	unsigned char *buf, *not_zero;
+	int ret;
 
 	buf = kmap(sg_page(sg)) + sg->offset;
 	if (!buf)
@@ -437,10 +437,10 @@ iblock_execute_zero_out(struct block_dev
 	 * Fall back to block_execute_write_same() slow-path if
 	 * incoming WRITE_SAME payload does not contain zeros.
 	 */
-	rc = memcmp(buf, p, cmd->data_length);
+	not_zero = memchr_inv(buf, 0x00, cmd->data_length);
 	kunmap(sg_page(sg));
 
-	if (rc)
+	if (not_zero)
 		return TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE;
 
 	ret = blkdev_issue_zeroout(bdev,
author maintainer
#12 lore raw

PATCH 12/52 Input: leds - fix out of bound access

In reply to Greg Kroah-Hartman

4.16-stable review patch. If anyone has any objections, please let me know.

------------------

From: Dmitry Torokhov <[email protected]>

commit 6bd6ae639683c0b41f46990d5c64ff9fbfa019dc upstream.

UI_SET_LEDBIT ioctl() causes the following KASAN splat when used with led > LED_CHARGING:

[ 1274.663418] BUG: KASAN: slab-out-of-bounds in input_leds_connect+0x611/0x730 [input_leds]
[ 1274.663426] Write of size 8 at addr ffff88003377b2c0 by task ckb-next-daemon/5128

This happens because we were writing to the led structure before making sure that it exists.

---
 drivers/input/input-leds.c |    8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)
drivers/input/input-leds.c +4 -4
@@ -88,6 +88,7 @@ static int input_leds_connect(struct inp
 			      const struct input_device_id *id)
 {
 	struct input_leds *leds;
+	struct input_led *led;
 	unsigned int num_leds;
 	unsigned int led_code;
 	int led_no;
@@ -119,14 +120,13 @@ static int input_leds_connect(struct inp
 
 	led_no = 0;
 	for_each_set_bit(led_code, dev->ledbit, LED_CNT) {
-		struct input_led *led = &leds->leds[led_no];
+		if (!input_led_info[led_code].name)
+			continue;
 
+		led = &leds->leds[led_no];
 		led->handle = &leds->handle;
 		led->code = led_code;
 
-		if (!input_led_info[led_code].name)
-			continue;
-
 		led->cdev.name = kasprintf(GFP_KERNEL, "%s::%s",
 					   dev_name(&dev->dev),
 					   input_led_info[led_code].name);
author maintainer
#13 lore raw

PATCH 13/52 Input: atmel_mxt_ts - add touchpad button mapping for Samsung Chromebook Pro

In reply to Greg Kroah-Hartman

4.16-stable review patch. If anyone has any objections, please let me know.

------------------

From: Vittorio Gambaletta (VittGam) <[email protected]>

commit f372b81101e6895252298e563d634d5e44ae81e7 upstream.

This patch adds the correct platform data information for the Caroline Chromebook, so that the mouse button does not get stuck in pressed state after the first click.

The Samus button keymap and platform data definition are the correct ones for Caroline, so they have been reused here.

---
 drivers/input/touchscreen/atmel_mxt_ts.c |    9 +++++++++
 1 file changed, 9 insertions(+)
drivers/input/touchscreen/atmel_mxt_ts.c +9 -0
@@ -3031,6 +3031,15 @@ static const struct dmi_system_id mxt_dm
 		.driver_data = samus_platform_data,
 	},
 	{
+		/* Samsung Chromebook Pro */
+		.ident = "Samsung Chromebook Pro",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Google"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Caroline"),
+		},
+		.driver_data = samus_platform_data,
+	},
+	{
 		/* Other Google Chromebooks */
 		.ident = "Chromebook",
 		.matches = {
author maintainer
#14 lore raw

PATCH 14/52 swiotlb: fix inversed DMA_ATTR_NO_WARN test

In reply to Greg Kroah-Hartman

4.16-stable review patch. If anyone has any objections, please let me know.

------------------

From: Michel Dänzer <[email protected]>

commit 892a0be43edd63e1cd228af3453a064e9e94f08e upstream.

The result was printing the warning only when we were explicitly asked not to.

Fixes 0176adb004065d6815a8e67946752df4cd947c5b "swiotlb: refactor

coherent buffer allocation"

---
 lib/swiotlb.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
lib/swiotlb.c +1 -1
@@ -750,7 +750,7 @@ out_unmap:
 	swiotlb_tbl_unmap_single(dev, phys_addr, size, DMA_TO_DEVICE,
 			DMA_ATTR_SKIP_CPU_SYNC);
 out_warn:
-	if ((attrs & DMA_ATTR_NO_WARN) && printk_ratelimit()) {
+	if (!(attrs & DMA_ATTR_NO_WARN) && printk_ratelimit()) {
 		dev_warn(dev,
 			"swiotlb: coherent allocation failed, size=%zu\n",
 			size);
author maintainer
#15 lore raw

PATCH 15/52 rtlwifi: cleanup 8723be ant_sel definition

In reply to Greg Kroah-Hartman

4.16-stable review patch. If anyone has any objections, please let me know.

------------------

From: Ping-Ke Shih <[email protected]>

commit af8a41cccf8f469165c6debc8fe07c5fd2ca501a upstream.

Some HP laptops have only a single wifi antenna. This would not be a problem except that they were shipped with an incorrectly encoded EFUSE. It should have been possible to open the computer and transfer the antenna connection to the other terminal except that such action might void the warranty, and moving the antenna broke the Windows driver. The fix was to add a module option that would override the EFUSE encoding. That was done with commit c18d8f509571 ("rtlwifi:
rtl8723be: Add antenna select module parameter"). There was still a problem with Bluetooth coexistence, which was addressed with commit baa170229095 ("rtlwifi: btcoexist: Implement antenna selection"). There were still problems, thus there were commit 0ff78adeef11 ("rtlwifi: rtl8723be: fix ant_sel code") and commit 6d6226928369 ("rtlwifi: btcoexist: Fix antenna selection code"). Despite all these attempts at fixing the problem, the code is not yet right. A proper fix is important as there are now instances of laptops having RTL8723DE chips with the same problem.

The module parameter ant_sel is used to control antenna number and path. At present enum ANT_{X2,X1} is used to define the antenna number, but this choice is not intuitive, thus change to a new enum ANT_{MAIN,AUX} to make it more readable. This change showed examples where incorrect values were used. It was also possible to remove a workaround in halbtcoutsrc.c.

The experimental results with single antenna connected to specific path are now as follows:
ant_sel ANT_MAIN(#1) ANT_AUX(#2)

     0        -8            -62
     1        -62           -10
     2        -6            -60
Fixes c18d8f509571 ("rtlwifi: rtl8723be: Add antenna select module parameter")
Fixes baa170229095 ("rtlwifi: btcoexist: Implement antenna selection")
Fixes 0ff78adeef11 ("rtlwifi: rtl8723be: fix ant_sel code")
Fixes 6d6226928369 ("rtlwifi: btcoexist: Fix antenna selection code")
Cc Stable <[email protected]> # 4.7+
---
 drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtcoutsrc.c |   15 ----------
 drivers/net/wireless/realtek/rtlwifi/rtl8723be/hw.c           |   11 ++++---
 drivers/net/wireless/realtek/rtlwifi/wifi.h                   |    5 +++
 3 files changed, 12 insertions(+), 19 deletions(-)
drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtcoutsrc.c +0 -15
@@ -158,16 +158,6 @@ static u8 halbtc_get_wifi_central_chnl(s
 
 static u8 rtl_get_hwpg_single_ant_path(struct rtl_priv *rtlpriv)
 {
-	struct rtl_mod_params *mod_params = rtlpriv->cfg->mod_params;
-
-	/* override ant_num / ant_path */
-	if (mod_params->ant_sel) {
-		rtlpriv->btcoexist.btc_info.ant_num =
-			(mod_params->ant_sel == 1 ? ANT_X2 : ANT_X1);
-
-		rtlpriv->btcoexist.btc_info.single_ant_path =
-			(mod_params->ant_sel == 1 ? 0 : 1);
-	}
 	return rtlpriv->btcoexist.btc_info.single_ant_path;
 }
 
@@ -178,7 +168,6 @@ static u8 rtl_get_hwpg_bt_type(struct rt
 
 static u8 rtl_get_hwpg_ant_num(struct rtl_priv *rtlpriv)
 {
-	struct rtl_mod_params *mod_params = rtlpriv->cfg->mod_params;
 	u8 num;
 
 	if (rtlpriv->btcoexist.btc_info.ant_num == ANT_X2)
@@ -186,10 +175,6 @@ static u8 rtl_get_hwpg_ant_num(struct rt
 	else
 		num = 1;
 
-	/* override ant_num / ant_path */
-	if (mod_params->ant_sel)
-		num = (mod_params->ant_sel == 1 ? ANT_X2 : ANT_X1) + 1;
-
 	return num;
 }
 
drivers/net/wireless/realtek/rtlwifi/rtl8723be/hw.c +7 -4
@@ -848,6 +848,9 @@ static bool _rtl8723be_init_mac(struct i
 		return false;
 	}
 
+	if (rtlpriv->cfg->ops->get_btc_status())
+		rtlpriv->btcoexist.btc_ops->btc_power_on_setting(rtlpriv);
+
 	bytetmp = rtl_read_byte(rtlpriv, REG_MULTI_FUNC_CTRL);
 	rtl_write_byte(rtlpriv, REG_MULTI_FUNC_CTRL, bytetmp | BIT(3));
 
@@ -2696,21 +2699,21 @@ void rtl8723be_read_bt_coexist_info_from
 		rtlpriv->btcoexist.btc_info.bt_type = BT_RTL8723B;
 		rtlpriv->btcoexist.btc_info.ant_num = (value & 0x1);
 		rtlpriv->btcoexist.btc_info.single_ant_path =
-			 (value & 0x40);	/*0xc3[6]*/
+			 (value & 0x40 ? ANT_AUX : ANT_MAIN);	/*0xc3[6]*/
 	} else {
 		rtlpriv->btcoexist.btc_info.btcoexist = 0;
 		rtlpriv->btcoexist.btc_info.bt_type = BT_RTL8723B;
 		rtlpriv->btcoexist.btc_info.ant_num = ANT_X2;
-		rtlpriv->btcoexist.btc_info.single_ant_path = 0;
+		rtlpriv->btcoexist.btc_info.single_ant_path = ANT_MAIN;
 	}
 
 	/* override ant_num / ant_path */
 	if (mod_params->ant_sel) {
 		rtlpriv->btcoexist.btc_info.ant_num =
-			(mod_params->ant_sel == 1 ? ANT_X2 : ANT_X1);
+			(mod_params->ant_sel == 1 ? ANT_X1 : ANT_X2);
 
 		rtlpriv->btcoexist.btc_info.single_ant_path =
-			(mod_params->ant_sel == 1 ? 0 : 1);
+			(mod_params->ant_sel == 1 ? ANT_AUX : ANT_MAIN);
 	}
 }
 
drivers/net/wireless/realtek/rtlwifi/wifi.h +5 -0
@@ -2759,6 +2759,11 @@ enum bt_ant_num {
 	ANT_X1 = 1,
 };
 
+enum bt_ant_path {
+	ANT_MAIN = 0,
+	ANT_AUX = 1,
+};
+
 enum bt_co_type {
 	BT_2WIRE = 0,
 	BT_ISSC_3WIRE = 1,
author maintainer
#16 lore raw

PATCH 16/52 xfs: prevent creating negative-sized file via INSERT_RANGE

In reply to Greg Kroah-Hartman

4.16-stable review patch. If anyone has any objections, please let me know.

------------------

From: Darrick J. Wong <[email protected]>

commit 7d83fb14258b9961920cd86f0b921caaeb3ebe85 upstream.

During the "insert range" fallocate operation, i_size grows by the specified 'len' bytes. XFS verifies that i_size + len < s_maxbytes, as it should. But this comparison is done using the signed 'loff_t', and 'i_size + len' can wrap around to a negative value, causing the check to incorrectly pass, resulting in an inode with "negative" i_size. This is possible on 64-bit platforms, where XFS sets s_maxbytes = LLONG_MAX. ext4 and f2fs don't run into this because they set a smaller s_maxbytes.

Fix it by using subtraction instead.

Reproducer:

    xfs_io -f file -c "truncate $(((1<<63)-1))" -c "finsert 0 4096"
Fixes a904b1ca5751 ("xfs: Add support FALLOC_FL_INSERT_RANGE for fallocate")
Cc <[email protected]> # v4.1+

Originally-From: Eric Biggers <[email protected]>

---
 fs/xfs/xfs_file.c |   14 +++++++++-----
 1 file changed, 9 insertions(+), 5 deletions(-)
fs/xfs/xfs_file.c +9 -5
@@ -812,22 +812,26 @@ xfs_file_fallocate(
 		if (error)
 			goto out_unlock;
 	} else if (mode & FALLOC_FL_INSERT_RANGE) {
-		unsigned int blksize_mask = i_blocksize(inode) - 1;
+		unsigned int	blksize_mask = i_blocksize(inode) - 1;
+		loff_t		isize = i_size_read(inode);
 
-		new_size = i_size_read(inode) + len;
 		if (offset & blksize_mask || len & blksize_mask) {
 			error = -EINVAL;
 			goto out_unlock;
 		}
 
-		/* check the new inode size does not wrap through zero */
-		if (new_size > inode->i_sb->s_maxbytes) {
+		/*
+		 * New inode size must not exceed ->s_maxbytes, accounting for
+		 * possible signed overflow.
+		 */
+		if (inode->i_sb->s_maxbytes - isize < len) {
 			error = -EFBIG;
 			goto out_unlock;
 		}
+		new_size = isize + len;
 
 		/* Offset should be less than i_size */
-		if (offset >= i_size_read(inode)) {
+		if (offset >= isize) {
 			error = -EINVAL;
 			goto out_unlock;
 		}
author maintainer
#17 lore raw

PATCH 17/52 tools: power/acpi, revert to LD = gcc

In reply to Greg Kroah-Hartman

4.16-stable review patch. If anyone has any objections, please let me know.

------------------

From: Jiri Slaby <[email protected]>

commit 755396163148b50fe1afb4bdd3365e47f3ff7a42 upstream.

Commit 7ed1c1901fe5 (tools: fix cross-compile var clobbering) removed setting of LD to $(CROSS_COMPILE)gcc. This broke build of acpica (acpidump) in power/acpi:
ld: unrecognized option '-D_LINUX'

The tools pass CFLAGS to the linker (incl. -D_LINUX), so revert this particular change and let LD be $(CC) again. Note that the old behaviour was a bit different, it used $(CROSS_COMPILE)gcc which was eliminated by the commit 7ed1c1901fe5. We use $(CC) for that reason.

Fixes 7ed1c1901fe5 (tools: fix cross-compile var clobbering)
Cc 4.16+ <[email protected]> # 4.16+
---
 tools/power/acpi/Makefile.config |    1 +
 1 file changed, 1 insertion(+)
tools/power/acpi/Makefile.config +1 -0
@@ -56,6 +56,7 @@ INSTALL_SCRIPT = ${INSTALL_PROGRAM}
 # to compile vs uClibc, that can be done here as well.
 CROSS = #/usr/i386-linux-uclibc/usr/bin/i386-uclibc-
 CROSS_COMPILE ?= $(CROSS)
+LD = $(CC)
 HOSTCC = gcc
 
 # check if compiler option is supported
author maintainer
#18 lore raw

PATCH 18/52 RDMA/cxgb4: release hw resources on device removal

In reply to Greg Kroah-Hartman

4.16-stable review patch. If anyone has any objections, please let me know.

------------------

From: Raju Rangoju <[email protected]>

commit 26bff1bd74a4f7417509a83295614e9dab995b2a upstream.

The c4iw_rdev_close() logic was not releasing all the hw resources (PBL and RQT memory) during the device removal event (driver unload / system reboot). This can cause panic in gen_pool_destroy().

The module remove function will wait for all the hw resources to be released during the device removal event.

Fixes c12a67fe(iw_cxgb4: free EQ queue memory on last deref)

---
 drivers/infiniband/hw/cxgb4/device.c   |    9 ++++++++-
 drivers/infiniband/hw/cxgb4/iw_cxgb4.h |    4 ++++
 drivers/infiniband/hw/cxgb4/resource.c |   26 ++++++++++++++++++++++++--
 3 files changed, 36 insertions(+), 3 deletions(-)
drivers/infiniband/hw/cxgb4/device.c +8 -1
@@ -875,6 +875,11 @@ static int c4iw_rdev_open(struct c4iw_rd
 
 	rdev->status_page->db_off = 0;
 
+	init_completion(&rdev->rqt_compl);
+	init_completion(&rdev->pbl_compl);
+	kref_init(&rdev->rqt_kref);
+	kref_init(&rdev->pbl_kref);
+
 	return 0;
 err_free_status_page_and_wr_log:
 	if (c4iw_wr_log && rdev->wr_log)
@@ -893,13 +898,15 @@ destroy_resource:
 
 static void c4iw_rdev_close(struct c4iw_rdev *rdev)
 {
-	destroy_workqueue(rdev->free_workq);
 	kfree(rdev->wr_log);
 	c4iw_release_dev_ucontext(rdev, &rdev->uctx);
 	free_page((unsigned long)rdev->status_page);
 	c4iw_pblpool_destroy(rdev);
 	c4iw_rqtpool_destroy(rdev);
+	wait_for_completion(&rdev->pbl_compl);
+	wait_for_completion(&rdev->rqt_compl);
 	c4iw_ocqp_pool_destroy(rdev);
+	destroy_workqueue(rdev->free_workq);
 	c4iw_destroy_resource(&rdev->resource);
 }
 
drivers/infiniband/hw/cxgb4/iw_cxgb4.h +4 -0
@@ -185,6 +185,10 @@ struct c4iw_rdev {
 	struct wr_log_entry *wr_log;
 	int wr_log_size;
 	struct workqueue_struct *free_workq;
+	struct completion rqt_compl;
+	struct completion pbl_compl;
+	struct kref rqt_kref;
+	struct kref pbl_kref;
 };
 
 static inline int c4iw_fatal_error(struct c4iw_rdev *rdev)
drivers/infiniband/hw/cxgb4/resource.c +24 -2
@@ -260,12 +260,22 @@ u32 c4iw_pblpool_alloc(struct c4iw_rdev
 		rdev->stats.pbl.cur += roundup(size, 1 << MIN_PBL_SHIFT);
 		if (rdev->stats.pbl.cur > rdev->stats.pbl.max)
 			rdev->stats.pbl.max = rdev->stats.pbl.cur;
+		kref_get(&rdev->pbl_kref);
 	} else
 		rdev->stats.pbl.fail++;
 	mutex_unlock(&rdev->stats.lock);
 	return (u32)addr;
 }
 
+static void destroy_pblpool(struct kref *kref)
+{
+	struct c4iw_rdev *rdev;
+
+	rdev = container_of(kref, struct c4iw_rdev, pbl_kref);
+	gen_pool_destroy(rdev->pbl_pool);
+	complete(&rdev->pbl_compl);
+}
+
 void c4iw_pblpool_free(struct c4iw_rdev *rdev, u32 addr, int size)
 {
 	pr_debug("addr 0x%x size %d\n", addr, size);
@@ -273,6 +283,7 @@ void c4iw_pblpool_free(struct c4iw_rdev
 	rdev->stats.pbl.cur -= roundup(size, 1 << MIN_PBL_SHIFT);
 	mutex_unlock(&rdev->stats.lock);
 	gen_pool_free(rdev->pbl_pool, (unsigned long)addr, size);
+	kref_put(&rdev->pbl_kref, destroy_pblpool);
 }
 
 int c4iw_pblpool_create(struct c4iw_rdev *rdev)
@@ -310,7 +321,7 @@ int c4iw_pblpool_create(struct c4iw_rdev
 
 void c4iw_pblpool_destroy(struct c4iw_rdev *rdev)
 {
-	gen_pool_destroy(rdev->pbl_pool);
+	kref_put(&rdev->pbl_kref, destroy_pblpool);
 }
 
 /*
@@ -331,12 +342,22 @@ u32 c4iw_rqtpool_alloc(struct c4iw_rdev
 		rdev->stats.rqt.cur += roundup(size << 6, 1 << MIN_RQT_SHIFT);
 		if (rdev->stats.rqt.cur > rdev->stats.rqt.max)
 			rdev->stats.rqt.max = rdev->stats.rqt.cur;
+		kref_get(&rdev->rqt_kref);
 	} else
 		rdev->stats.rqt.fail++;
 	mutex_unlock(&rdev->stats.lock);
 	return (u32)addr;
 }
 
+static void destroy_rqtpool(struct kref *kref)
+{
+	struct c4iw_rdev *rdev;
+
+	rdev = container_of(kref, struct c4iw_rdev, rqt_kref);
+	gen_pool_destroy(rdev->rqt_pool);
+	complete(&rdev->rqt_compl);
+}
+
 void c4iw_rqtpool_free(struct c4iw_rdev *rdev, u32 addr, int size)
 {
 	pr_debug("addr 0x%x size %d\n", addr, size << 6);
@@ -344,6 +365,7 @@ void c4iw_rqtpool_free(struct c4iw_rdev
 	rdev->stats.rqt.cur -= roundup(size << 6, 1 << MIN_RQT_SHIFT);
 	mutex_unlock(&rdev->stats.lock);
 	gen_pool_free(rdev->rqt_pool, (unsigned long)addr, size << 6);
+	kref_put(&rdev->rqt_kref, destroy_rqtpool);
 }
 
 int c4iw_rqtpool_create(struct c4iw_rdev *rdev)
@@ -380,7 +402,7 @@ int c4iw_rqtpool_create(struct c4iw_rdev
 
 void c4iw_rqtpool_destroy(struct c4iw_rdev *rdev)
 {
-	gen_pool_destroy(rdev->rqt_pool);
+	kref_put(&rdev->rqt_kref, destroy_rqtpool);
 }
 
 /*
author maintainer
#19 lore raw

PATCH 19/52 RDMA/ucma: Allow resolving address w/o specifying source address

In reply to Greg Kroah-Hartman

4.16-stable review patch. If anyone has any objections, please let me know.

------------------

From: Roland Dreier <[email protected]>

commit 09abfe7b5b2f442a85f4c4d59ecf582ad76088d7 upstream.

The RDMA CM will select a source device and address by consulting the routing table if no source address is passed into rdma_resolve_address(). Userspace will ask for this by passing an all-zero source address in the RESOLVE_IP command. Unfortunately the new check for non-zero address size rejects this with EINVAL, which breaks valid userspace applications.

Fix this by explicitly allowing a zero address family for the source.

Fixes 2975d5de6428 ("RDMA/ucma: Check AF family prior resolving address")
---
 drivers/infiniband/core/ucma.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/infiniband/core/ucma.c +1 -1
@@ -678,7 +678,7 @@ static ssize_t ucma_resolve_ip(struct uc
 	if (copy_from_user(&cmd, inbuf, sizeof(cmd)))
 		return -EFAULT;
 
-	if (!rdma_addr_size_in6(&cmd.src_addr) ||
+	if ((cmd.src_addr.sin6_family && !rdma_addr_size_in6(&cmd.src_addr)) ||
 	    !rdma_addr_size_in6(&cmd.dst_addr))
 		return -EINVAL;
 
author maintainer
#20 lore raw

PATCH 20/52 RDMA/mlx5: Fix multiple NULL-ptr deref errors in rereg_mr flow

In reply to Greg Kroah-Hartman

4.16-stable review patch. If anyone has any objections, please let me know.

------------------

From: Leon Romanovsky <[email protected]>

commit b4bd701ac469075d94ed9699a28755f2862252b9 upstream.

Failure in rereg MR releases UMEM but leaves the MR to be destroyed by the user. As a result the following scenario may happen:
"create MR -> rereg MR with failure -> call to rereg MR again" and hit "NULL-ptr deref or user memory access" errors.

Ensure that rereg MR is only performed on a non-dead MR.

Cc syzkaller <[email protected]>
Fixes 395a8e4c32ea ("IB/mlx5: Refactoring register MR code")
---
 drivers/infiniband/hw/mlx5/mr.c |   32 +++++++++++++++++++++++---------
 1 file changed, 23 insertions(+), 9 deletions(-)
drivers/infiniband/hw/mlx5/mr.c +23 -9
@@ -836,25 +836,28 @@ static int mr_umem_get(struct ib_pd *pd,
 		       int *order)
 {
 	struct mlx5_ib_dev *dev = to_mdev(pd->device);
+	struct ib_umem *u;
 	int err;
 
-	*umem = ib_umem_get(pd->uobject->context, start, length,
-			    access_flags, 0);
-	err = PTR_ERR_OR_ZERO(*umem);
+	*umem = NULL;
+
+	u = ib_umem_get(pd->uobject->context, start, length, access_flags, 0);
+	err = PTR_ERR_OR_ZERO(u);
 	if (err) {
-		*umem = NULL;
-		mlx5_ib_err(dev, "umem get failed (%d)\n", err);
+		mlx5_ib_dbg(dev, "umem get failed (%d)\n", err);
 		return err;
 	}
 
-	mlx5_ib_cont_pages(*umem, start, MLX5_MKEY_PAGE_SHIFT_MASK, npages,
+	mlx5_ib_cont_pages(u, start, MLX5_MKEY_PAGE_SHIFT_MASK, npages,
 			   page_shift, ncont, order);
 	if (!*npages) {
 		mlx5_ib_warn(dev, "avoid zero region\n");
-		ib_umem_release(*umem);
+		ib_umem_release(u);
 		return -EINVAL;
 	}
 
+	*umem = u;
+
 	mlx5_ib_dbg(dev, "npages %d, ncont %d, order %d, page_shift %d\n",
 		    *npages, *ncont, *order, *page_shift);
 
@@ -1343,13 +1346,12 @@ int mlx5_ib_rereg_user_mr(struct ib_mr *
 	int access_flags = flags & IB_MR_REREG_ACCESS ?
 			    new_access_flags :
 			    mr->access_flags;
-	u64 addr = (flags & IB_MR_REREG_TRANS) ? virt_addr : mr->umem->address;
-	u64 len = (flags & IB_MR_REREG_TRANS) ? length : mr->umem->length;
 	int page_shift = 0;
 	int upd_flags = 0;
 	int npages = 0;
 	int ncont = 0;
 	int order = 0;
+	u64 addr, len;
 	int err;
 
 	mlx5_ib_dbg(dev, "start 0x%llx, virt_addr 0x%llx, length 0x%llx, access_flags 0x%x\n",
@@ -1357,6 +1359,17 @@ int mlx5_ib_rereg_user_mr(struct ib_mr *
 
 	atomic_sub(mr->npages, &dev->mdev->priv.reg_pages);
 
+	if (!mr->umem)
+		return -EINVAL;
+
+	if (flags & IB_MR_REREG_TRANS) {
+		addr = virt_addr;
+		len = length;
+	} else {
+		addr = mr->umem->address;
+		len = mr->umem->length;
+	}
+
 	if (flags != IB_MR_REREG_PD) {
 		/*
 		 * Replace umem. This needs to be done whether or not UMR is
@@ -1364,6 +1377,7 @@ int mlx5_ib_rereg_user_mr(struct ib_mr *
 		 */
 		flags |= IB_MR_REREG_TRANS;
 		ib_umem_release(mr->umem);
+		mr->umem = NULL;
 		err = mr_umem_get(pd, addr, len, access_flags, &mr->umem,
 				  &npages, &page_shift, &ncont, &order);
 		if (err < 0) {
author maintainer
#21 lore raw

PATCH 21/52 RDMA/mlx4: Add missed RSS hash inner header flag

In reply to Greg Kroah-Hartman

4.16-stable review patch. If anyone has any objections, please let me know.

------------------

From: Leon Romanovsky <[email protected]>

commit 4f9ca2d8686ecfdd40ca4f0294a3d94f83f05cea upstream.

Despite being advertised to user space application, the RSS inner header flag was filtered by checks at the beginning of QP creation routine.

Cc <[email protected]> # 4.15
Fixes 4d02ebd9bbbd ("IB/mlx4: Fix RSS hash fields restrictions")
Fixes 07d84f7b6adf ("IB/mlx4: Add support to RSS hash for inner headers")
---
 drivers/infiniband/hw/mlx4/qp.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
drivers/infiniband/hw/mlx4/qp.c +2 -1
@@ -673,7 +673,8 @@ static int set_qp_rss(struct mlx4_ib_dev
 					  MLX4_IB_RX_HASH_SRC_PORT_TCP	|
 					  MLX4_IB_RX_HASH_DST_PORT_TCP	|
 					  MLX4_IB_RX_HASH_SRC_PORT_UDP	|
-					  MLX4_IB_RX_HASH_DST_PORT_UDP)) {
+					  MLX4_IB_RX_HASH_DST_PORT_UDP  |
+					  MLX4_IB_RX_HASH_INNER)) {
 		pr_debug("RX Hash fields_mask has unsupported mask (0x%llx)\n",
 			 ucmd->rx_hash_fields_mask);
 		return (-EOPNOTSUPP);
author maintainer
#22 lore raw

PATCH 22/52 RDMA/mlx5: Protect from shift operand overflow

In reply to Greg Kroah-Hartman

4.16-stable review patch. If anyone has any objections, please let me know.

------------------

From: Leon Romanovsky <[email protected]>

commit 002bf2282b2d7318e444dca9ffcb994afc5d5f15 upstream.

Ensure that user didn't supply values too large that can cause overflow.

UBSAN: Undefined behaviour in drivers/infiniband/hw/mlx5/qp.c:263:23
shift exponent -2147483648 is negative
CPU: 0 PID: 292 Comm: syzkaller612609 Not tainted 4.16.0-rc1+ #131
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.11.0-0-g63451fca13-prebuilt.qemu-project.org 04/01/2014 Call
Trace:
dump_stack+0xde/0x164
ubsan_epilogue+0xe/0x81
set_rq_size+0x7c2/0xa90
create_qp_common+0xc18/0x43c0
mlx5_ib_create_qp+0x379/0x1ca0
create_qp.isra.5+0xc94/0x2260
ib_uverbs_create_qp+0x21b/0x2a0
ib_uverbs_write+0xc2c/0x1010
vfs_write+0x1b0/0x550
SyS_write+0xc7/0x1a0
do_syscall_64+0x1aa/0x740
entry_SYSCALL_64_after_hwframe+0x26/0x9b
RIP: 0033:0x433569
RSP: 002b:00007ffc6e62f448 EFLAGS: 00000217 ORIG_RAX: 0000000000000001
RAX: ffffffffffffffda RBX: 00000000004002f8 RCX: 0000000000433569
RDX: 0000000000000070 RSI: 00000000200042c0 RDI: 0000000000000003
RBP: 00000000006d5018 R08: 00000000004002f8 R09: 00000000004002f8
R10: 00000000004002f8 R11: 0000000000000217 R12: 0000000000000000
R13: 000000000040c9f0 R14: 000000000040ca80 R15: 0000000000000006
Cc <[email protected]> # 3.10
Fixes e126ba97dba9 ("mlx5: Add driver for Mellanox Connect-IB adapters")
Cc syzkaller <[email protected]>
---
 drivers/infiniband/hw/mlx5/qp.c |    4 ++++
 1 file changed, 4 insertions(+)
drivers/infiniband/hw/mlx5/qp.c +4 -0
@@ -256,7 +256,11 @@ static int set_rq_size(struct mlx5_ib_de
 	} else {
 		if (ucmd) {
 			qp->rq.wqe_cnt = ucmd->rq_wqe_count;
+			if (ucmd->rq_wqe_shift > BITS_PER_BYTE * sizeof(ucmd->rq_wqe_shift))
+				return -EINVAL;
 			qp->rq.wqe_shift = ucmd->rq_wqe_shift;
+			if ((1 << qp->rq.wqe_shift) / sizeof(struct mlx5_wqe_data_seg) < qp->wq_sig)
+				return -EINVAL;
 			qp->rq.max_gs = (1 << qp->rq.wqe_shift) / sizeof(struct mlx5_wqe_data_seg) - qp->wq_sig;
 			qp->rq.max_post = qp->rq.wqe_cnt;
 		} else {
author maintainer
#23 lore raw

PATCH 23/52 NET: usb: qmi_wwan: add support for ublox R410M PID 0x90b2

In reply to Greg Kroah-Hartman

4.16-stable review patch. If anyone has any objections, please let me know.

------------------

From: SZ Lin (林上智) <[email protected]>

commit 9306b38e42cb266f98bff6f6f4c1c652aa79ba45 upstream.

This patch adds support for PID 0x90b2 of ublox R410M.

qmicli -d /dev/cdc-wdm0 --dms-get-manufacturer
[/dev/cdc-wdm0] Device manufacturer retrieved:
Manufacturer: 'u-blox'

qmicli -d /dev/cdc-wdm0 --dms-get-model
[/dev/cdc-wdm0] Device model retrieved:

        Model: 'SARA-R410M-02B'
---
 drivers/net/usb/qmi_wwan.c |    1 +
 1 file changed, 1 insertion(+)
drivers/net/usb/qmi_wwan.c +1 -0
@@ -1098,6 +1098,7 @@ static const struct usb_device_id produc
 	{QMI_FIXED_INTF(0x05c6, 0x9080, 8)},
 	{QMI_FIXED_INTF(0x05c6, 0x9083, 3)},
 	{QMI_FIXED_INTF(0x05c6, 0x9084, 4)},
+	{QMI_FIXED_INTF(0x05c6, 0x90b2, 3)},    /* ublox R410M */
 	{QMI_FIXED_INTF(0x05c6, 0x920d, 0)},
 	{QMI_FIXED_INTF(0x05c6, 0x920d, 5)},
 	{QMI_QUIRK_SET_DTR(0x05c6, 0x9625, 4)},	/* YUGA CLM920-NC5 */
author maintainer
#24 lore raw

PATCH 24/52 IB/mlx5: Use unlimited rate when static rate is not supported

In reply to Greg Kroah-Hartman

4.16-stable review patch. If anyone has any objections, please let me know.

------------------

From: Danit Goldberg <[email protected]>

commit 4f32ac2e452c2180cd2df581cbadac183e27ecd0 upstream.

Before the change, if the user passed a static rate value different than zero and the FW doesn't support static rate,
it would end up configuring rate of 2.5 GBps.

Fix this by using rate 0; unlimited, in cases where FW doesn't support static rate configuration.

Cc <[email protected]> # 3.10
Fixes e126ba97dba9 ("mlx5: Add driver for Mellanox Connect-IB adapters")
---
 drivers/infiniband/hw/mlx5/qp.c |   18 +++++++++---------
 1 file changed, 9 insertions(+), 9 deletions(-)
drivers/infiniband/hw/mlx5/qp.c +9 -9
@@ -2424,18 +2424,18 @@ enum {
 
 static int ib_rate_to_mlx5(struct mlx5_ib_dev *dev, u8 rate)
 {
-	if (rate == IB_RATE_PORT_CURRENT) {
+	if (rate == IB_RATE_PORT_CURRENT)
 		return 0;
-	} else if (rate < IB_RATE_2_5_GBPS || rate > IB_RATE_300_GBPS) {
+
+	if (rate < IB_RATE_2_5_GBPS || rate > IB_RATE_300_GBPS)
 		return -EINVAL;
-	} else {
-		while (rate != IB_RATE_2_5_GBPS &&
-		       !(1 << (rate + MLX5_STAT_RATE_OFFSET) &
-			 MLX5_CAP_GEN(dev->mdev, stat_rate_support)))
-			--rate;
-	}
 
-	return rate + MLX5_STAT_RATE_OFFSET;
+	while (rate != IB_RATE_PORT_CURRENT &&
+	       !(1 << (rate + MLX5_STAT_RATE_OFFSET) &
+		 MLX5_CAP_GEN(dev->mdev, stat_rate_support)))
+		--rate;
+
+	return rate ? rate + MLX5_STAT_RATE_OFFSET : rate;
 }
 
 static int modify_raw_packet_eth_prio(struct mlx5_core_dev *dev,
author maintainer
#25 lore raw

PATCH 25/52 infiniband: mlx5: fix build errors when INFINIBAND_USER_ACCESS=m

In reply to Greg Kroah-Hartman

4.16-stable review patch. If anyone has any objections, please let me know.

------------------

From: Randy Dunlap <[email protected]>

commit b3fe6c62bc66868c45b5bb16050e6bcb333af337 upstream.

Fix build errors when INFINIBAND_USER_ACCESS=m and MLX5_INFINIBAND=y. The build error occurs when the mlx5 driver code attempts to use USER_ACCESS interfaces, which are built as a loadable module.

Fixes these build errors:

drivers/infiniband/hw/mlx5/main.o: In function `populate_specs_root':
../drivers/infiniband/hw/mlx5/main.c:4982: undefined reference to uverbs_default_get_objects' ../drivers/infiniband/hw/mlx5/main.c:4994: undefined reference to uverbs_alloc_spec_tree' drivers/infiniband/hw/mlx5/main.o: In function `depopulate_specs_root':
../drivers/infiniband/hw/mlx5/main.c:5001: undefined reference to `uverbs_free_spec_tree'

Build-tested with multiple config combinations.

Fixes 8c84660bb437 ("IB/mlx5: Initialize the parsing tree root without the help of uverbs")
Cc [email protected] # reported against 4.16
---
 drivers/infiniband/hw/mlx5/Kconfig |    1 +
 1 file changed, 1 insertion(+)
drivers/infiniband/hw/mlx5/Kconfig +1 -0
@@ -1,6 +1,7 @@
 config MLX5_INFINIBAND
 	tristate "Mellanox Connect-IB HCA support"
 	depends on NETDEVICES && ETHERNET && PCI && MLX5_CORE
+	depends on INFINIBAND_USER_ACCESS || INFINIBAND_USER_ACCESS=n
 	---help---
 	  This driver provides low-level InfiniBand support for
 	  Mellanox Connect-IB PCI Express host channel adapters (HCAs).
author maintainer
#26 lore raw

PATCH 26/52 IB/hfi1: Fix handling of FECN marked multicast packet

In reply to Greg Kroah-Hartman

4.16-stable review patch. If anyone has any objections, please let me know.

------------------

From: Mike Marciniszyn <[email protected]>

commit f59fb9e05109b836230813e45f71c9ecc2d5dbe6 upstream.

The code for handling a marked UD packet unconditionally returns the dlid in the header of the FECN marked packet. This is not correct for multicast packets where the DLID is in the multicast range.

The subsequent attempt to send the CNP with the multicast lid will cause the chip to halt the ack send context because the source
lid doesn't match the chip programming. The send context will
be halted and flush any other pending packets in the pio ring causing the CNP to not be sent.

A part of investigating the fix, it was determined that the 16B work broke the FECN routine badly with inconsistent use of 16 bit and 32 bits types for lids and pkeys. Since the port's source lid was correctly 32 bits the type mixmatches need to be dealt with at the same time as fixing the CNP header issue.

Fix these issues by:
- Using the ports lid for as the SLID for responding to FECN marked UD packets
- Insure pkey is always 16 bit in this and subordinate routines
- Insure lids are 32 bits in this and subordinate routines

---
 drivers/infiniband/hw/hfi1/driver.c |   19 +++++++++++++++----
 drivers/infiniband/hw/hfi1/hfi.h    |    8 ++++----
 drivers/infiniband/hw/hfi1/ud.c     |    4 ++--
 3 files changed, 21 insertions(+), 10 deletions(-)
drivers/infiniband/hw/hfi1/driver.c +15 -4
@@ -432,31 +432,43 @@ void hfi1_process_ecn_slowpath(struct rv
 			       bool do_cnp)
 {
 	struct hfi1_ibport *ibp = to_iport(qp->ibqp.device, qp->port_num);
+	struct hfi1_pportdata *ppd = ppd_from_ibp(ibp);
 	struct ib_other_headers *ohdr = pkt->ohdr;
 	struct ib_grh *grh = pkt->grh;
 	u32 rqpn = 0, bth1;
-	u16 pkey, rlid, dlid = ib_get_dlid(pkt->hdr);
+	u16 pkey;
+	u32 rlid, slid, dlid = 0;
 	u8 hdr_type, sc, svc_type;
 	bool is_mcast = false;
 
+	/* can be called from prescan */
 	if (pkt->etype == RHF_RCV_TYPE_BYPASS) {
 		is_mcast = hfi1_is_16B_mcast(dlid);
 		pkey = hfi1_16B_get_pkey(pkt->hdr);
 		sc = hfi1_16B_get_sc(pkt->hdr);
+		dlid = hfi1_16B_get_dlid(pkt->hdr);
+		slid = hfi1_16B_get_slid(pkt->hdr);
 		hdr_type = HFI1_PKT_TYPE_16B;
 	} else {
 		is_mcast = (dlid > be16_to_cpu(IB_MULTICAST_LID_BASE)) &&
 			   (dlid != be16_to_cpu(IB_LID_PERMISSIVE));
 		pkey = ib_bth_get_pkey(ohdr);
 		sc = hfi1_9B_get_sc5(pkt->hdr, pkt->rhf);
+		dlid = ib_get_dlid(pkt->hdr);
+		slid = ib_get_slid(pkt->hdr);
 		hdr_type = HFI1_PKT_TYPE_9B;
 	}
 
 	switch (qp->ibqp.qp_type) {
+	case IB_QPT_UD:
+		dlid = ppd->lid;
+		rlid = slid;
+		rqpn = ib_get_sqpn(pkt->ohdr);
+		svc_type = IB_CC_SVCTYPE_UD;
+		break;
 	case IB_QPT_SMI:
 	case IB_QPT_GSI:
-	case IB_QPT_UD:
-		rlid = ib_get_slid(pkt->hdr);
+		rlid = slid;
 		rqpn = ib_get_sqpn(pkt->ohdr);
 		svc_type = IB_CC_SVCTYPE_UD;
 		break;
@@ -481,7 +493,6 @@ void hfi1_process_ecn_slowpath(struct rv
 					      dlid, rlid, sc, grh);
 
 	if (!is_mcast && (bth1 & IB_BECN_SMASK)) {
-		struct hfi1_pportdata *ppd = ppd_from_ibp(ibp);
 		u32 lqpn = bth1 & RVT_QPN_MASK;
 		u8 sl = ibp->sc_to_sl[sc];
 
drivers/infiniband/hw/hfi1/hfi.h +4 -4
@@ -1538,13 +1538,13 @@ void set_link_ipg(struct hfi1_pportdata
 void process_becn(struct hfi1_pportdata *ppd, u8 sl, u32 rlid, u32 lqpn,
 		  u32 rqpn, u8 svc_type);
 void return_cnp(struct hfi1_ibport *ibp, struct rvt_qp *qp, u32 remote_qpn,
-		u32 pkey, u32 slid, u32 dlid, u8 sc5,
+		u16 pkey, u32 slid, u32 dlid, u8 sc5,
 		const struct ib_grh *old_grh);
 void return_cnp_16B(struct hfi1_ibport *ibp, struct rvt_qp *qp,
-		    u32 remote_qpn, u32 pkey, u32 slid, u32 dlid,
+		    u32 remote_qpn, u16 pkey, u32 slid, u32 dlid,
 		    u8 sc5, const struct ib_grh *old_grh);
 typedef void (*hfi1_handle_cnp)(struct hfi1_ibport *ibp, struct rvt_qp *qp,
-				u32 remote_qpn, u32 pkey, u32 slid, u32 dlid,
+				u32 remote_qpn, u16 pkey, u32 slid, u32 dlid,
 				u8 sc5, const struct ib_grh *old_grh);
 
 #define PKEY_CHECK_INVALID -1
@@ -2438,7 +2438,7 @@ static inline void hfi1_make_16b_hdr(str
 		((slid >> OPA_16B_SLID_SHIFT) << OPA_16B_SLID_HIGH_SHIFT);
 	lrh2 = (lrh2 & ~OPA_16B_DLID_MASK) |
 		((dlid >> OPA_16B_DLID_SHIFT) << OPA_16B_DLID_HIGH_SHIFT);
-	lrh2 = (lrh2 & ~OPA_16B_PKEY_MASK) | (pkey << OPA_16B_PKEY_SHIFT);
+	lrh2 = (lrh2 & ~OPA_16B_PKEY_MASK) | ((u32)pkey << OPA_16B_PKEY_SHIFT);
 	lrh2 = (lrh2 & ~OPA_16B_L4_MASK) | l4;
 
 	hdr->lrh[0] = lrh0;
drivers/infiniband/hw/hfi1/ud.c +2 -2
@@ -628,7 +628,7 @@ int hfi1_lookup_pkey_idx(struct hfi1_ibp
 }
 
 void return_cnp_16B(struct hfi1_ibport *ibp, struct rvt_qp *qp,
-		    u32 remote_qpn, u32 pkey, u32 slid, u32 dlid,
+		    u32 remote_qpn, u16 pkey, u32 slid, u32 dlid,
 		    u8 sc5, const struct ib_grh *old_grh)
 {
 	u64 pbc, pbc_flags = 0;
@@ -687,7 +687,7 @@ void return_cnp_16B(struct hfi1_ibport *
 }
 
 void return_cnp(struct hfi1_ibport *ibp, struct rvt_qp *qp, u32 remote_qpn,
-		u32 pkey, u32 slid, u32 dlid, u8 sc5,
+		u16 pkey, u32 slid, u32 dlid, u8 sc5,
 		const struct ib_grh *old_grh)
 {
 	u64 pbc, pbc_flags = 0;
author maintainer
#27 lore raw

PATCH 27/52 IB/hfi1: Fix loss of BECN with AHG

In reply to Greg Kroah-Hartman

4.16-stable review patch. If anyone has any objections, please let me know.

------------------

From: Mike Marciniszyn <[email protected]>

commit 0a0bcb046b2f0c15b89f8c1b08ad3de601a83c66 upstream.

AHG may be armed to use the stored header, which by design is limited to edits in the PSN/A 32 bit word (bth2).

When the code is trying to send a BECN, the use of the stored header will lose the BECN bit.

Fix by avoiding AHG when getting ready to send a BECN. This is accomplished by always claiming the packet is not a middle packet which is an AHG precursor. BECNs are not a normal case and this should not hurt AHG optimizations.

---
 drivers/infiniband/hw/hfi1/ruc.c |   50 +++++++++++++++++++++++++++++++--------
 1 file changed, 40 insertions(+), 10 deletions(-)
drivers/infiniband/hw/hfi1/ruc.c +40 -10
@@ -733,6 +733,20 @@ static inline void hfi1_make_ruc_bth(str
 	ohdr->bth[2] = cpu_to_be32(bth2);
 }
 
+/**
+ * hfi1_make_ruc_header_16B - build a 16B header
+ * @qp: the queue pair
+ * @ohdr: a pointer to the destination header memory
+ * @bth0: bth0 passed in from the RC/UC builder
+ * @bth2: bth2 passed in from the RC/UC builder
+ * @middle: non zero implies indicates ahg "could" be used
+ * @ps: the current packet state
+ *
+ * This routine may disarm ahg under these situations:
+ * - packet needs a GRH
+ * - BECN needed
+ * - migration state not IB_MIG_MIGRATED
+ */
 static inline void hfi1_make_ruc_header_16B(struct rvt_qp *qp,
 					    struct ib_other_headers *ohdr,
 					    u32 bth0, u32 bth2, int middle,
@@ -777,6 +791,12 @@ static inline void hfi1_make_ruc_header_
 	else
 		middle = 0;
 
+	if (qp->s_flags & RVT_S_ECN) {
+		qp->s_flags &= ~RVT_S_ECN;
+		/* we recently received a FECN, so return a BECN */
+		becn = true;
+		middle = 0;
+	}
 	if (middle)
 		build_ahg(qp, bth2);
 	else
@@ -784,11 +804,6 @@ static inline void hfi1_make_ruc_header_
 
 	bth0 |= pkey;
 	bth0 |= extra_bytes << 20;
-	if (qp->s_flags & RVT_S_ECN) {
-		qp->s_flags &= ~RVT_S_ECN;
-		/* we recently received a FECN, so return a BECN */
-		becn = true;
-	}
 	hfi1_make_ruc_bth(qp, ohdr, bth0, bth1, bth2);
 
 	if (!ppd->lid)
@@ -806,6 +821,20 @@ static inline void hfi1_make_ruc_header_
 			  pkey, becn, 0, l4, priv->s_sc);
 }
 
+/**
+ * hfi1_make_ruc_header_9B - build a 9B header
+ * @qp: the queue pair
+ * @ohdr: a pointer to the destination header memory
+ * @bth0: bth0 passed in from the RC/UC builder
+ * @bth2: bth2 passed in from the RC/UC builder
+ * @middle: non zero implies indicates ahg "could" be used
+ * @ps: the current packet state
+ *
+ * This routine may disarm ahg under these situations:
+ * - packet needs a GRH
+ * - BECN needed
+ * - migration state not IB_MIG_MIGRATED
+ */
 static inline void hfi1_make_ruc_header_9B(struct rvt_qp *qp,
 					   struct ib_other_headers *ohdr,
 					   u32 bth0, u32 bth2, int middle,
@@ -839,6 +868,12 @@ static inline void hfi1_make_ruc_header_
 	else
 		middle = 0;
 
+	if (qp->s_flags & RVT_S_ECN) {
+		qp->s_flags &= ~RVT_S_ECN;
+		/* we recently received a FECN, so return a BECN */
+		bth1 |= (IB_BECN_MASK << IB_BECN_SHIFT);
+		middle = 0;
+	}
 	if (middle)
 		build_ahg(qp, bth2);
 	else
@@ -846,11 +881,6 @@ static inline void hfi1_make_ruc_header_
 
 	bth0 |= pkey;
 	bth0 |= extra_bytes << 20;
-	if (qp->s_flags & RVT_S_ECN) {
-		qp->s_flags &= ~RVT_S_ECN;
-		/* we recently received a FECN, so return a BECN */
-		bth1 |= (IB_BECN_MASK << IB_BECN_SHIFT);
-	}
 	hfi1_make_ruc_bth(qp, ohdr, bth0, bth1, bth2);
 	hfi1_make_ib_hdr(&ps->s_txreq->phdr.hdr.ibh,
 			 lrh0,
author maintainer
#28 lore raw

PATCH 28/52 IB/hfi1: Fix NULL pointer dereference when invalid num_vls is used

In reply to Greg Kroah-Hartman

4.16-stable review patch. If anyone has any objections, please let me know.

------------------

From: Sebastian Sanchez <[email protected]>

commit 45d924571a5e1329580811f2419da61b07ac3613 upstream.

When an invalid num_vls is used as a module parameter, the code execution follows an exception path where the macro dd_dev_err() expects dd->pcidev->dev not to be NULL in hfi1_init_dd(). This causes a NULL pointer dereference.

Fix hfi1_init_dd() by initializing dd->pcidev and dd->pcidev->dev earlier in the code. If a dd exists, then dd->pcidev and dd->pcidev->dev always exists.

BUG: unable to handle kernel NULL pointer dereference
at 00000000000000f0
IP: __dev_printk+0x15/0x90
Workqueue: events work_for_cpu_fn
RIP: 0010:__dev_printk+0x15/0x90
Call Trace:
 dev_err+0x6c/0x90
 ? hfi1_init_pportdata+0x38d/0x3f0 [hfi1]
 hfi1_init_dd+0xdd/0x2530 [hfi1]
 ? pci_conf1_read+0xb2/0xf0
 ? pci_read_config_word.part.9+0x64/0x80
 ? pci_conf1_write+0xb0/0xf0
 ? pcie_capability_clear_and_set_word+0x57/0x80
 init_one+0x141/0x490 [hfi1]
 local_pci_probe+0x3f/0xa0
 work_for_cpu_fn+0x10/0x20
 process_one_work+0x152/0x350
 worker_thread+0x1cf/0x3e0
 kthread+0xf5/0x130
 ? max_active_store+0x80/0x80
 ? kthread_bind+0x10/0x10
 ? do_syscall_64+0x6e/0x1a0
 ? SyS_exit_group+0x10/0x10
 ret_from_fork+0x35/0x40
---
 drivers/infiniband/hw/hfi1/init.c |    2 ++
 drivers/infiniband/hw/hfi1/pcie.c |    3 ---
 2 files changed, 2 insertions(+), 3 deletions(-)
drivers/infiniband/hw/hfi1/init.c +2 -0
@@ -1265,6 +1265,8 @@ struct hfi1_devdata *hfi1_alloc_devdata(
 		return ERR_PTR(-ENOMEM);
 	dd->num_pports = nports;
 	dd->pport = (struct hfi1_pportdata *)(dd + 1);
+	dd->pcidev = pdev;
+	pci_set_drvdata(pdev, dd);
 
 	INIT_LIST_HEAD(&dd->list);
 	idr_preload(GFP_KERNEL);
drivers/infiniband/hw/hfi1/pcie.c +0 -3
@@ -163,9 +163,6 @@ int hfi1_pcie_ddinit(struct hfi1_devdata
 	resource_size_t addr;
 	int ret = 0;
 
-	dd->pcidev = pdev;
-	pci_set_drvdata(pdev, dd);
-
 	addr = pci_resource_start(pdev, 0);
 	len = pci_resource_len(pdev, 0);
 
author maintainer
#29 lore raw

PATCH 29/52 iw_cxgb4: Atomically flush per QP HW CQEs

In reply to Greg Kroah-Hartman

4.16-stable review patch. If anyone has any objections, please let me know.

------------------

From: Bharat Potnuri <[email protected]>

commit 2df19e19ae90d94fd8724083f161f368a2797537 upstream.

When a CQ is shared by multiple QPs, c4iw_flush_hw_cq() needs to acquire corresponding QP lock before moving the CQEs into its corresponding SW queue and accessing the SQ contents for completing a WR. Ignore CQEs if corresponding QP is already flushed.

---
 drivers/infiniband/hw/cxgb4/cq.c       |   11 ++++++++++-
 drivers/infiniband/hw/cxgb4/iw_cxgb4.h |    2 +-
 drivers/infiniband/hw/cxgb4/qp.c       |    4 ++--
 3 files changed, 13 insertions(+), 4 deletions(-)
drivers/infiniband/hw/cxgb4/cq.c +10 -1
@@ -315,7 +315,7 @@ static void advance_oldest_read(struct t
  * Deal with out-of-order and/or completions that complete
  * prior unsignalled WRs.
  */
-void c4iw_flush_hw_cq(struct c4iw_cq *chp)
+void c4iw_flush_hw_cq(struct c4iw_cq *chp, struct c4iw_qp *flush_qhp)
 {
 	struct t4_cqe *hw_cqe, *swcqe, read_cqe;
 	struct c4iw_qp *qhp;
@@ -339,6 +339,13 @@ void c4iw_flush_hw_cq(struct c4iw_cq *ch
 		if (qhp == NULL)
 			goto next_cqe;
 
+		if (flush_qhp != qhp) {
+			spin_lock(&qhp->lock);
+
+			if (qhp->wq.flushed == 1)
+				goto next_cqe;
+		}
+
 		if (CQE_OPCODE(hw_cqe) == FW_RI_TERMINATE)
 			goto next_cqe;
 
@@ -390,6 +397,8 @@ void c4iw_flush_hw_cq(struct c4iw_cq *ch
 next_cqe:
 		t4_hwcq_consume(&chp->cq);
 		ret = t4_next_hw_cqe(&chp->cq, &hw_cqe);
+		if (qhp && flush_qhp != qhp)
+			spin_unlock(&qhp->lock);
 	}
 }
 
drivers/infiniband/hw/cxgb4/iw_cxgb4.h +1 -1
@@ -1053,7 +1053,7 @@ u32 c4iw_pblpool_alloc(struct c4iw_rdev
 void c4iw_pblpool_free(struct c4iw_rdev *rdev, u32 addr, int size);
 u32 c4iw_ocqp_pool_alloc(struct c4iw_rdev *rdev, int size);
 void c4iw_ocqp_pool_free(struct c4iw_rdev *rdev, u32 addr, int size);
-void c4iw_flush_hw_cq(struct c4iw_cq *chp);
+void c4iw_flush_hw_cq(struct c4iw_cq *chp, struct c4iw_qp *flush_qhp);
 void c4iw_count_rcqes(struct t4_cq *cq, struct t4_wq *wq, int *count);
 int c4iw_ep_disconnect(struct c4iw_ep *ep, int abrupt, gfp_t gfp);
 int c4iw_flush_rq(struct t4_wq *wq, struct t4_cq *cq, int count);
drivers/infiniband/hw/cxgb4/qp.c +2 -2
@@ -1343,12 +1343,12 @@ static void __flush_qp(struct c4iw_qp *q
 	qhp->wq.flushed = 1;
 	t4_set_wq_in_error(&qhp->wq);
 
-	c4iw_flush_hw_cq(rchp);
+	c4iw_flush_hw_cq(rchp, qhp);
 	c4iw_count_rcqes(&rchp->cq, &qhp->wq, &count);
 	rq_flushed = c4iw_flush_rq(&qhp->wq, &rchp->cq, count);
 
 	if (schp != rchp)
-		c4iw_flush_hw_cq(schp);
+		c4iw_flush_hw_cq(schp, qhp);
 	sq_flushed = c4iw_flush_sq(qhp);
 
 	spin_unlock(&qhp->lock);
author maintainer
#30 lore raw

PATCH 30/52 btrfs: Take trans lock before access running trans in check_delayed_ref

In reply to Greg Kroah-Hartman

4.16-stable review patch. If anyone has any objections, please let me know.

------------------

From: ethanwu <[email protected]>

commit 998ac6d21cfd6efd58f5edf420bae8839dda9f2a upstream.

In preivous patch:
Btrfs: kill trans in run_delalloc_nocow and btrfs_cross_ref_exist We avoid starting btrfs transaction and get this information from fs_info->running_transaction directly.

When accessing running_transaction in check_delayed_ref, there's a chance that current transaction will be freed by commit transaction after the NULL pointer check of running_transaction is passed.

After looking all the other places using fs_info->running_transaction, they are either protected by trans_lock or holding the transactions.

Fix this by using trans_lock and increasing the use_count.

Fixes e4c3b2dcd144 ("Btrfs: kill trans in run_delalloc_nocow and btrfs_cross_ref_exist")
---
 fs/btrfs/extent-tree.c |    7 +++++++
 1 file changed, 7 insertions(+)
fs/btrfs/extent-tree.c +7 -0
@@ -3155,7 +3155,11 @@ static noinline int check_delayed_ref(st
 	struct rb_node *node;
 	int ret = 0;
 
+	spin_lock(&root->fs_info->trans_lock);
 	cur_trans = root->fs_info->running_transaction;
+	if (cur_trans)
+		refcount_inc(&cur_trans->use_count);
+	spin_unlock(&root->fs_info->trans_lock);
 	if (!cur_trans)
 		return 0;
 
@@ -3164,6 +3168,7 @@ static noinline int check_delayed_ref(st
 	head = btrfs_find_delayed_ref_head(delayed_refs, bytenr);
 	if (!head) {
 		spin_unlock(&delayed_refs->lock);
+		btrfs_put_transaction(cur_trans);
 		return 0;
 	}
 
@@ -3180,6 +3185,7 @@ static noinline int check_delayed_ref(st
 		mutex_lock(&head->mutex);
 		mutex_unlock(&head->mutex);
 		btrfs_put_delayed_ref_head(head);
+		btrfs_put_transaction(cur_trans);
 		return -EAGAIN;
 	}
 	spin_unlock(&delayed_refs->lock);
@@ -3212,6 +3218,7 @@ static noinline int check_delayed_ref(st
 	}
 	spin_unlock(&head->lock);
 	mutex_unlock(&head->mutex);
+	btrfs_put_transaction(cur_trans);
 	return ret;
 }
 
author maintainer
#31 lore raw

PATCH 31/52 drm/vc4: Make sure vc4_bo_{inc,dec}_usecnt() calls are balanced

In reply to Greg Kroah-Hartman

4.16-stable review patch. If anyone has any objections, please let me know.

------------------

From: Boris Brezillon <[email protected]>

commit f7aef1c207092770d06d0df21dceafdca2b49c39 upstream.

Commit b9f19259b84d ("drm/vc4: Add the DRM_IOCTL_VC4_GEM_MADVISE ioctl") introduced a mechanism to mark some BOs as purgeable to allow the driver to drop them under memory pressure. In order to implement this feature we had to add a mechanism to mark BOs as currently used by a piece of hardware which materialized through the ->usecnt counter.

Plane code is supposed to increment usecnt when it attaches a BO to a plane and decrement it when it's done with this BO, which was done in the ->prepare_fb() and ->cleanup_fb() hooks. The problem is, async page flip logic does not go through the regular atomic update path, and ->prepare_fb() and ->cleanup_fb() are not called in this case.

Fix that by manually calling vc4_bo_{inc,dec}_usecnt() in the async-page-flip path.

Note that all this should go away as soon as we get generic async page flip support in the core, in the meantime, this fix should do the trick.

---
 drivers/gpu/drm/vc4/vc4_crtc.c |   46 ++++++++++++++++++++++++++++++++++++++++-
 1 file changed, 45 insertions(+), 1 deletion(-)
drivers/gpu/drm/vc4/vc4_crtc.c +45 -1
@@ -735,6 +735,7 @@ static irqreturn_t vc4_crtc_irq_handler(
 struct vc4_async_flip_state {
 	struct drm_crtc *crtc;
 	struct drm_framebuffer *fb;
+	struct drm_framebuffer *old_fb;
 	struct drm_pending_vblank_event *event;
 
 	struct vc4_seqno_cb cb;
@@ -764,6 +765,23 @@ vc4_async_page_flip_complete(struct vc4_
 
 	drm_crtc_vblank_put(crtc);
 	drm_framebuffer_put(flip_state->fb);
+
+	/* Decrement the BO usecnt in order to keep the inc/dec calls balanced
+	 * when the planes are updated through the async update path.
+	 * FIXME: we should move to generic async-page-flip when it's
+	 * available, so that we can get rid of this hand-made cleanup_fb()
+	 * logic.
+	 */
+	if (flip_state->old_fb) {
+		struct drm_gem_cma_object *cma_bo;
+		struct vc4_bo *bo;
+
+		cma_bo = drm_fb_cma_get_gem_obj(flip_state->old_fb, 0);
+		bo = to_vc4_bo(&cma_bo->base);
+		vc4_bo_dec_usecnt(bo);
+		drm_framebuffer_put(flip_state->old_fb);
+	}
+
 	kfree(flip_state);
 
 	up(&vc4->async_modeset);
@@ -788,9 +806,22 @@ static int vc4_async_page_flip(struct dr
 	struct drm_gem_cma_object *cma_bo = drm_fb_cma_get_gem_obj(fb, 0);
 	struct vc4_bo *bo = to_vc4_bo(&cma_bo->base);
 
+	/* Increment the BO usecnt here, so that we never end up with an
+	 * unbalanced number of vc4_bo_{dec,inc}_usecnt() calls when the
+	 * plane is later updated through the non-async path.
+	 * FIXME: we should move to generic async-page-flip when it's
+	 * available, so that we can get rid of this hand-made prepare_fb()
+	 * logic.
+	 */
+	ret = vc4_bo_inc_usecnt(bo);
+	if (ret)
+		return ret;
+
 	flip_state = kzalloc(sizeof(*flip_state), GFP_KERNEL);
-	if (!flip_state)
+	if (!flip_state) {
+		vc4_bo_dec_usecnt(bo);
 		return -ENOMEM;
+	}
 
 	drm_framebuffer_get(fb);
 	flip_state->fb = fb;
@@ -801,10 +832,23 @@ static int vc4_async_page_flip(struct dr
 	ret = down_interruptible(&vc4->async_modeset);
 	if (ret) {
 		drm_framebuffer_put(fb);
+		vc4_bo_dec_usecnt(bo);
 		kfree(flip_state);
 		return ret;
 	}
 
+	/* Save the current FB before it's replaced by the new one in
+	 * drm_atomic_set_fb_for_plane(). We'll need the old FB in
+	 * vc4_async_page_flip_complete() to decrement the BO usecnt and keep
+	 * it consistent.
+	 * FIXME: we should move to generic async-page-flip when it's
+	 * available, so that we can get rid of this hand-made cleanup_fb()
+	 * logic.
+	 */
+	flip_state->old_fb = plane->state->fb;
+	if (flip_state->old_fb)
+		drm_framebuffer_get(flip_state->old_fb);
+
 	WARN_ON(drm_crtc_vblank_get(crtc) != 0);
 
 	/* Immediately update the plane's legacy fb pointer, so that later
author maintainer
#32 lore raw

PATCH 32/52 drm/vmwgfx: Fix a buffer object leak

In reply to Greg Kroah-Hartman

4.16-stable review patch. If anyone has any objections, please let me know.

------------------

From: Thomas Hellstrom <[email protected]>

commit 13f149d47392782baafd96d54d4e65f3b5ca342f upstream.

A buffer object leak was introduced when fixing a premature buffer object release. Fix this.

Fixes 73a88250b709 ("Fix a destoy-while-held mutex problem.")
---
 drivers/gpu/drm/vmwgfx/vmwgfx_kms.c |    1 +
 1 file changed, 1 insertion(+)
drivers/gpu/drm/vmwgfx/vmwgfx_kms.c +1 -0
@@ -2598,6 +2598,7 @@ void vmw_kms_helper_resource_finish(stru
 		vmw_kms_helper_buffer_finish(res->dev_priv, NULL, ctx->buf,
 					     out_fence, NULL);
 
+	vmw_dmabuf_unreference(&ctx->buf);
 	vmw_resource_unreserve(res, false, NULL, 0);
 	mutex_unlock(&res->dev_priv->cmdbuf_mutex);
 }
author maintainer
#33 lore raw

PATCH 33/52 drm/bridge: vga-dac: Fix edid memory leak

In reply to Greg Kroah-Hartman

4.16-stable review patch. If anyone has any objections, please let me know.

------------------

From: Sean Paul <[email protected]>

commit 49ceda9de2da4d1827941d06701f3017c27c1855 upstream.

edid should be freed once it's finished being used.

Fixes 56fe8b6f4991 ("drm/bridge: Add RGB to VGA bridge support")
Cc Rob Herring <[email protected]>
Cc Sean Paul <[email protected]>
Cc Maxime Ripard <[email protected]>
Cc Archit Taneja <[email protected]>
Cc Andrzej Hajda <[email protected]>
Cc Laurent Pinchart <[email protected]>
Cc <[email protected]> # v4.9+
---
 drivers/gpu/drm/bridge/dumb-vga-dac.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)
drivers/gpu/drm/bridge/dumb-vga-dac.c +3 -1
@@ -55,7 +55,9 @@ static int dumb_vga_get_modes(struct drm
 	}
 
 	drm_mode_connector_update_edid_property(connector, edid);
-	return drm_add_edid_modes(connector, edid);
+	ret = drm_add_edid_modes(connector, edid);
+	kfree(edid);
+	return ret;
 
 fallback:
 	/*
author maintainer
#34 lore raw

PATCH 34/52 test_firmware: fix setting old custom fw path back on exit, second try

In reply to Greg Kroah-Hartman

4.16-stable review patch. If anyone has any objections, please let me know.

------------------

From: Ben Hutchings <[email protected]>

commit e538409257d0217a9bc715686100a5328db75a15 upstream.

Commit 65c79230576 tried to clear the custom firmware path on exit by writing a single space to the firmware_class.path parameter. This doesn't work because nothing strips this space from the value stored and fw_get_filesystem_firmware() only ignores zero-length paths.

Instead, write a null byte.

Fixes 0a8adf58475 ("test: add firmware_class loader test")
Fixes 65c79230576 ("test_firmware: fix setting old custom fw path back on exit")
Cc stable <[email protected]>
---
 tools/testing/selftests/firmware/fw_filesystem.sh |    6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)
tools/testing/selftests/firmware/fw_filesystem.sh +4 -2
@@ -46,9 +46,11 @@ test_finish()
 		echo "$OLD_TIMEOUT" >/sys/class/firmware/timeout
 	fi
 	if [ "$OLD_FWPATH" = "" ]; then
-		OLD_FWPATH=" "
+		# A zero-length write won't work; write a null byte
+		printf '\000' >/sys/module/firmware_class/parameters/path
+	else
+		echo -n "$OLD_FWPATH" >/sys/module/firmware_class/parameters/path
 	fi
-	echo -n "$OLD_FWPATH" >/sys/module/firmware_class/parameters/path
 	rm -f "$FW"
 	rmdir "$FWPATH"
 }
author maintainer
#35 lore raw

PATCH 35/52 xhci: Fix use-after-free in xhci_free_virt_device

In reply to Greg Kroah-Hartman

4.16-stable review patch. If anyone has any objections, please let me know.

------------------

From: Mathias Nyman <[email protected]>

commit 44a182b9d17765514fa2b1cc911e4e65134eef93 upstream.

KASAN found a use-after-free in xhci_free_virt_device+0x33b/0x38e where xhci_free_virt_device() sets slot id to 0 if udev exists:
if (dev->udev && dev->udev->slot_id)

	dev->udev->slot_id = 0;

dev->udev will be true even if udev is freed because dev->udev is not set to NULL.

set dev->udev pointer to NULL in xhci_free_dev()

The original patch went to stable so this fix needs to be applied there as well.

Fixes a400efe455f7 ("xhci: zero usb device slot_id member when disabling and freeing a xhci slot")
---
 drivers/usb/host/xhci.c |    1 +
 1 file changed, 1 insertion(+)
drivers/usb/host/xhci.c +1 -0
@@ -3548,6 +3548,7 @@ static void xhci_free_dev(struct usb_hcd
 		del_timer_sync(&virt_dev->eps[i].stop_cmd_timer);
 	}
 	xhci_debugfs_remove_slot(xhci, udev->slot_id);
+	virt_dev->udev = NULL;
 	ret = xhci_disable_slot(xhci, udev->slot_id);
 	if (ret)
 		xhci_free_virt_device(xhci, udev->slot_id);
author maintainer
#36 lore raw

PATCH 36/52 USB: serial: visor: handle potential invalid device configuration

In reply to Greg Kroah-Hartman

4.16-stable review patch. If anyone has any objections, please let me know.

------------------

From: Greg Kroah-Hartman <[email protected]>

commit 4842ed5bfcb9daf6660537d70503c18d38dbdbb8 upstream.

If we get an invalid device configuration from a palm 3 type device, we might incorrectly parse things, and we have the potential to crash in "interesting" ways.

Fix this up by verifying the size of the configuration passed to us by the device, and only if it is correct, will we handle it.

Note that this also fixes an information leak of slab data.

---
 drivers/usb/serial/visor.c |   69 ++++++++++++++++++++++-----------------------
 1 file changed, 35 insertions(+), 34 deletions(-)
drivers/usb/serial/visor.c +35 -34
@@ -335,47 +335,48 @@ static int palm_os_3_probe(struct usb_se
 		goto exit;
 	}
 
-	if (retval == sizeof(*connection_info)) {
-			connection_info = (struct visor_connection_info *)
-							transfer_buffer;
-
-		num_ports = le16_to_cpu(connection_info->num_ports);
-		for (i = 0; i < num_ports; ++i) {
-			switch (
-			   connection_info->connections[i].port_function_id) {
-			case VISOR_FUNCTION_GENERIC:
-				string = "Generic";
-				break;
-			case VISOR_FUNCTION_DEBUGGER:
-				string = "Debugger";
-				break;
-			case VISOR_FUNCTION_HOTSYNC:
-				string = "HotSync";
-				break;
-			case VISOR_FUNCTION_CONSOLE:
-				string = "Console";
-				break;
-			case VISOR_FUNCTION_REMOTE_FILE_SYS:
-				string = "Remote File System";
-				break;
-			default:
-				string = "unknown";
-				break;
-			}
-			dev_info(dev, "%s: port %d, is for %s use\n",
-				serial->type->description,
-				connection_info->connections[i].port, string);
-		}
+	if (retval != sizeof(*connection_info)) {
+		dev_err(dev, "Invalid connection information received from device\n");
+		retval = -ENODEV;
+		goto exit;
 	}
-	/*
-	* Handle devices that report invalid stuff here.
-	*/
+
+	connection_info = (struct visor_connection_info *)transfer_buffer;
+
+	num_ports = le16_to_cpu(connection_info->num_ports);
+
+	/* Handle devices that report invalid stuff here. */
 	if (num_ports == 0 || num_ports > 2) {
 		dev_warn(dev, "%s: No valid connect info available\n",
 			serial->type->description);
 		num_ports = 2;
 	}
 
+	for (i = 0; i < num_ports; ++i) {
+		switch (connection_info->connections[i].port_function_id) {
+		case VISOR_FUNCTION_GENERIC:
+			string = "Generic";
+			break;
+		case VISOR_FUNCTION_DEBUGGER:
+			string = "Debugger";
+			break;
+		case VISOR_FUNCTION_HOTSYNC:
+			string = "HotSync";
+			break;
+		case VISOR_FUNCTION_CONSOLE:
+			string = "Console";
+			break;
+		case VISOR_FUNCTION_REMOTE_FILE_SYS:
+			string = "Remote File System";
+			break;
+		default:
+			string = "unknown";
+			break;
+		}
+		dev_info(dev, "%s: port %d, is for %s use\n",
+			serial->type->description,
+			connection_info->connections[i].port, string);
+	}
 	dev_info(dev, "%s: Number of ports: %d\n", serial->type->description,
 		num_ports);
 
author maintainer
#37 lore raw

PATCH 37/52 usb: dwc3: gadget: Fix list_del corruption in dwc3_ep_dequeue

In reply to Greg Kroah-Hartman

4.16-stable review patch. If anyone has any objections, please let me know.

------------------

From: Mayank Rana <[email protected]>

commit 96bd39df29c29d348d65311e5954c0b7d3a2a790 upstream.

dwc3_ep_dequeue() waits for completion of End Transfer command using wait_event_lock_irq(), which will release the dwc3->lock while waiting and reacquire after completion. This allows a potential race condition with ep_disable() which also removes all requests from started_list and pending_list.

The check for NULL r->trb should catch this but currently it exits to the wrong 'out1' label which calls dwc3_gadget_giveback(). Since its list entry was already removed, if CONFIG_DEBUG_LIST is enabled a 'list_del corruption' bug is thrown since its next/prev pointers are already LIST_POISON1/2. If r->trb is NULL it should simply exit to 'out0'.

Fixes cf3113d893d4 ("usb: dwc3: gadget: properly increment dequeue pointer on ep_dequeue")
Cc [email protected] # v4.12+
---
 drivers/usb/dwc3/gadget.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/usb/dwc3/gadget.c +1 -1
@@ -1424,7 +1424,7 @@ static int dwc3_gadget_ep_dequeue(struct
 					dwc->lock);
 
 			if (!r->trb)
-				goto out1;
+				goto out0;
 
 			if (r->num_pending_sgs) {
 				struct dwc3_trb *trb;
author maintainer
#38 lore raw

PATCH 38/52 USB: Accept bulk endpoints with 1024-byte maxpacket

In reply to Greg Kroah-Hartman

4.16-stable review patch. If anyone has any objections, please let me know.

------------------

From: Alan Stern <[email protected]>

commit fb5ee84ea72c5f1b6cabdd1c9d6e8648995ca7c6 upstream.

Some non-compliant high-speed USB devices have bulk endpoints with a 1024-byte maxpacket size. Although such endpoints don't work with xHCI host controllers, they do work with EHCI controllers. We used to accept these invalid sizes (with a warning), but we no longer do because of an unintentional change introduced by commit aed9d65ac327 ("USB: validate wMaxPacketValue entries in endpoint descriptors").

This patch restores the old behavior, so that people with these peculiar devices can use them without patching their kernels by hand.

Fixes aed9d65ac327 ("USB: validate wMaxPacketValue entries in endpoint descriptors")
---
 drivers/usb/core/config.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)
drivers/usb/core/config.c +3 -1
@@ -191,7 +191,9 @@ static const unsigned short full_speed_m
 static const unsigned short high_speed_maxpacket_maxes[4] = {
 	[USB_ENDPOINT_XFER_CONTROL] = 64,
 	[USB_ENDPOINT_XFER_ISOC] = 1024,
-	[USB_ENDPOINT_XFER_BULK] = 512,
+
+	/* Bulk should be 512, but some devices use 1024: we will warn below */
+	[USB_ENDPOINT_XFER_BULK] = 1024,
 	[USB_ENDPOINT_XFER_INT] = 1024,
 };
 static const unsigned short super_speed_maxpacket_maxes[4] = {
author maintainer
#39 lore raw

PATCH 39/52 USB: serial: option: reimplement interface masking

In reply to Greg Kroah-Hartman

4.16-stable review patch. If anyone has any objections, please let me know.

------------------

From: Johan Hovold <[email protected]>

commit c3a65808f04a8426481b63a4fbd9392f009f6330 upstream.

Reimplement interface masking using device flags stored directly in the device-id table. This will make it easier to add and maintain device-id entries by using a more compact and readable notation compared to the current implementation (which manages pairs of masks in separate blacklist structs).

Two convenience macros are used to flag an interface as either reserved or as not supporting modem-control requests:

	{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_ME910_DUAL_MODEM),
	  .driver_info = NCTRL(0) | RSVD(3) },

For now, we limit the highest maskable interface number to seven, which allows for (up to 16) additional device flags to be added later should need arise.

Note that this will likely need to be backported to stable in order to make future device-id backports more manageable.

---
 drivers/usb/serial/option.c |  446 ++++++++++++++------------------------------
 1 file changed, 152 insertions(+), 294 deletions(-)
drivers/usb/serial/option.c +152 -294
@@ -548,151 +548,15 @@ static void option_instat_callback(struc
 #define WETELECOM_PRODUCT_6802			0x6802
 #define WETELECOM_PRODUCT_WMD300		0x6803
 
-struct option_blacklist_info {
-	/* bitmask of interface numbers blacklisted for send_setup */
-	const unsigned long sendsetup;
-	/* bitmask of interface numbers that are reserved */
-	const unsigned long reserved;
-};
-
-static const struct option_blacklist_info four_g_w14_blacklist = {
-	.sendsetup = BIT(0) | BIT(1),
-};
-
-static const struct option_blacklist_info four_g_w100_blacklist = {
-	.sendsetup = BIT(1) | BIT(2),
-	.reserved = BIT(3),
-};
-
-static const struct option_blacklist_info alcatel_x200_blacklist = {
-	.sendsetup = BIT(0) | BIT(1),
-	.reserved = BIT(4),
-};
-
-static const struct option_blacklist_info zte_0037_blacklist = {
-	.sendsetup = BIT(0) | BIT(1),
-};
-
-static const struct option_blacklist_info zte_k3765_z_blacklist = {
-	.sendsetup = BIT(0) | BIT(1) | BIT(2),
-	.reserved = BIT(4),
-};
-
-static const struct option_blacklist_info zte_ad3812_z_blacklist = {
-	.sendsetup = BIT(0) | BIT(1) | BIT(2),
-};
-
-static const struct option_blacklist_info zte_mc2718_z_blacklist = {
-	.sendsetup = BIT(1) | BIT(2) | BIT(3) | BIT(4),
-};
-
-static const struct option_blacklist_info zte_mc2716_z_blacklist = {
-	.sendsetup = BIT(1) | BIT(2) | BIT(3),
-};
-
-static const struct option_blacklist_info zte_me3620_mbim_blacklist = {
-	.reserved = BIT(2) | BIT(3) | BIT(4),
-};
-
-static const struct option_blacklist_info zte_me3620_xl_blacklist = {
-	.reserved = BIT(3) | BIT(4) | BIT(5),
-};
-
-static const struct option_blacklist_info zte_zm8620_x_blacklist = {
-	.reserved = BIT(3) | BIT(4) | BIT(5),
-};
-
-static const struct option_blacklist_info huawei_cdc12_blacklist = {
-	.reserved = BIT(1) | BIT(2),
-};
-
-static const struct option_blacklist_info net_intf0_blacklist = {
-	.reserved = BIT(0),
-};
-
-static const struct option_blacklist_info net_intf1_blacklist = {
-	.reserved = BIT(1),
-};
-
-static const struct option_blacklist_info net_intf2_blacklist = {
-	.reserved = BIT(2),
-};
-
-static const struct option_blacklist_info net_intf3_blacklist = {
-	.reserved = BIT(3),
-};
-
-static const struct option_blacklist_info net_intf4_blacklist = {
-	.reserved = BIT(4),
-};
-
-static const struct option_blacklist_info net_intf5_blacklist = {
-	.reserved = BIT(5),
-};
-
-static const struct option_blacklist_info net_intf6_blacklist = {
-	.reserved = BIT(6),
-};
-
-static const struct option_blacklist_info zte_mf626_blacklist = {
-	.sendsetup = BIT(0) | BIT(1),
-	.reserved = BIT(4),
-};
-
-static const struct option_blacklist_info zte_1255_blacklist = {
-	.reserved = BIT(3) | BIT(4),
-};
-
-static const struct option_blacklist_info simcom_sim7100e_blacklist = {
-	.reserved = BIT(5) | BIT(6),
-};
-
-static const struct option_blacklist_info telit_me910_blacklist = {
-	.sendsetup = BIT(0),
-	.reserved = BIT(1) | BIT(3),
-};
-
-static const struct option_blacklist_info telit_me910_dual_modem_blacklist = {
-	.sendsetup = BIT(0),
-	.reserved = BIT(3),
-};
-
-static const struct option_blacklist_info telit_le910_blacklist = {
-	.sendsetup = BIT(0),
-	.reserved = BIT(1) | BIT(2),
-};
-
-static const struct option_blacklist_info telit_le920_blacklist = {
-	.sendsetup = BIT(0),
-	.reserved = BIT(1) | BIT(5),
-};
-
-static const struct option_blacklist_info telit_le920a4_blacklist_1 = {
-	.sendsetup = BIT(0),
-	.reserved = BIT(1),
-};
-
-static const struct option_blacklist_info telit_le922_blacklist_usbcfg0 = {
-	.sendsetup = BIT(2),
-	.reserved = BIT(0) | BIT(1) | BIT(3),
-};
 
-static const struct option_blacklist_info telit_le922_blacklist_usbcfg3 = {
-	.sendsetup = BIT(0),
-	.reserved = BIT(1) | BIT(2) | BIT(3),
-};
+/* Device flags */
 
-static const struct option_blacklist_info cinterion_rmnet2_blacklist = {
-	.reserved = BIT(4) | BIT(5),
-};
+/* Interface does not support modem-control requests */
+#define NCTRL(ifnum)	((BIT(ifnum) & 0xff) << 8)
 
-static const struct option_blacklist_info yuga_clm920_nc5_blacklist = {
-	.reserved = BIT(1) | BIT(4),
-};
+/* Interface is reserved */
+#define RSVD(ifnum)	((BIT(ifnum) & 0xff) << 0)
 
-static const struct option_blacklist_info quectel_ep06_blacklist = {
-	.reserved = BIT(4) | BIT(5),
-};
 
 static const struct usb_device_id option_ids[] = {
 	{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_COLT) },
@@ -726,26 +590,26 @@ static const struct usb_device_id option
 	{ USB_DEVICE(QUANTA_VENDOR_ID, QUANTA_PRODUCT_GKE) },
 	{ USB_DEVICE(QUANTA_VENDOR_ID, QUANTA_PRODUCT_GLE) },
 	{ USB_DEVICE(QUANTA_VENDOR_ID, 0xea42),
-		.driver_info = (kernel_ulong_t)&net_intf4_blacklist },
+	  .driver_info = RSVD(4) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0x1c05, USB_CLASS_COMM, 0x02, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0x1c1f, USB_CLASS_COMM, 0x02, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0x1c23, USB_CLASS_COMM, 0x02, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E173, 0xff, 0xff, 0xff),
-		.driver_info = (kernel_ulong_t) &net_intf1_blacklist },
+	  .driver_info = RSVD(1) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E173S6, 0xff, 0xff, 0xff),
-		.driver_info = (kernel_ulong_t) &net_intf1_blacklist },
+	  .driver_info = RSVD(1) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1750, 0xff, 0xff, 0xff),
-		.driver_info = (kernel_ulong_t) &net_intf2_blacklist },
+	  .driver_info = RSVD(2) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0x1441, USB_CLASS_COMM, 0x02, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0x1442, USB_CLASS_COMM, 0x02, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K4505, 0xff, 0xff, 0xff),
-		.driver_info = (kernel_ulong_t) &huawei_cdc12_blacklist },
+	  .driver_info = RSVD(1) | RSVD(2) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K3765, 0xff, 0xff, 0xff),
-		.driver_info = (kernel_ulong_t) &huawei_cdc12_blacklist },
+	  .driver_info = RSVD(1) | RSVD(2) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0x14ac, 0xff, 0xff, 0xff),	/* Huawei E1820 */
-		.driver_info = (kernel_ulong_t) &net_intf1_blacklist },
+	  .driver_info = RSVD(1) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K4605, 0xff, 0xff, 0xff),
-		.driver_info = (kernel_ulong_t) &huawei_cdc12_blacklist },
+	  .driver_info = RSVD(1) | RSVD(2) },
 	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0xff, 0xff) },
 	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x01) },
 	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x02) },
@@ -1190,67 +1054,67 @@ static const struct usb_device_id option
 	{ USB_DEVICE(KYOCERA_VENDOR_ID, KYOCERA_PRODUCT_KPC680) },
 	{ USB_DEVICE(QUALCOMM_VENDOR_ID, 0x6000)}, /* ZTE AC8700 */
 	{ USB_DEVICE_AND_INTERFACE_INFO(QUALCOMM_VENDOR_ID, 0x6001, 0xff, 0xff, 0xff), /* 4G LTE usb-modem U901 */
-	  .driver_info = (kernel_ulong_t)&net_intf3_blacklist },
+	  .driver_info = RSVD(3) },
 	{ USB_DEVICE(QUALCOMM_VENDOR_ID, 0x6613)}, /* Onda H600/ZTE MF330 */
 	{ USB_DEVICE(QUALCOMM_VENDOR_ID, 0x0023)}, /* ONYX 3G device */
 	{ USB_DEVICE(QUALCOMM_VENDOR_ID, 0x9000)}, /* SIMCom SIM5218 */
 	/* Quectel products using Qualcomm vendor ID */
 	{ USB_DEVICE(QUALCOMM_VENDOR_ID, QUECTEL_PRODUCT_UC15)},
 	{ USB_DEVICE(QUALCOMM_VENDOR_ID, QUECTEL_PRODUCT_UC20),
-	  .driver_info = (kernel_ulong_t)&net_intf4_blacklist },
+	  .driver_info = RSVD(4) },
 	/* Yuga products use Qualcomm vendor ID */
 	{ USB_DEVICE(QUALCOMM_VENDOR_ID, YUGA_PRODUCT_CLM920_NC5),
-	  .driver_info = (kernel_ulong_t)&yuga_clm920_nc5_blacklist },
+	  .driver_info = RSVD(1) | RSVD(4) },
 	/* Quectel products using Quectel vendor ID */
 	{ USB_DEVICE(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EC21),
-	  .driver_info = (kernel_ulong_t)&net_intf4_blacklist },
+	  .driver_info = RSVD(4) },
 	{ USB_DEVICE(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EC25),
-	  .driver_info = (kernel_ulong_t)&net_intf4_blacklist },
+	  .driver_info = RSVD(4) },
 	{ USB_DEVICE(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_BG96),
-	  .driver_info = (kernel_ulong_t)&net_intf4_blacklist },
+	  .driver_info = RSVD(4) },
 	{ USB_DEVICE(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EP06),
-	  .driver_info = (kernel_ulong_t)&quectel_ep06_blacklist },
+	  .driver_info = RSVD(4) | RSVD(5) },
 	{ USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_6001) },
 	{ USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_CMU_300) },
 	{ USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_6003),
-	  .driver_info = (kernel_ulong_t)&net_intf0_blacklist },
+	  .driver_info = RSVD(0) },
 	{ USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_6004) },
 	{ USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_6005) },
 	{ USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_CGU_628A) },
 	{ USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_CHE_628S),
-	  .driver_info = (kernel_ulong_t)&net_intf0_blacklist },
+	  .driver_info = RSVD(0) },
 	{ USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_CMU_301),
-	  .driver_info = (kernel_ulong_t)&net_intf0_blacklist },
+	  .driver_info = RSVD(0) },
 	{ USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_CHU_628),
-	  .driver_info = (kernel_ulong_t)&net_intf0_blacklist },
+	  .driver_info = RSVD(0) },
 	{ USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_CHU_628S) },
 	{ USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_CDU_680) },
 	{ USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_CDU_685A) },
 	{ USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_CHU_720S),
-	  .driver_info = (kernel_ulong_t)&net_intf0_blacklist },
+	  .driver_info = RSVD(0) },
 	{ USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_7002),
-	  .driver_info = (kernel_ulong_t)&net_intf0_blacklist },
+	  .driver_info = RSVD(0) },
 	{ USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_CHU_629K),
-	  .driver_info = (kernel_ulong_t)&net_intf4_blacklist },
+	  .driver_info = RSVD(4) },
 	{ USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_7004),
-	  .driver_info = (kernel_ulong_t)&net_intf3_blacklist },
+	  .driver_info = RSVD(3) },
 	{ USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_7005) },
 	{ USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_CGU_629),
-	  .driver_info = (kernel_ulong_t)&net_intf5_blacklist },
+	  .driver_info = RSVD(5) },
 	{ USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_CHU_629S),
-	  .driver_info = (kernel_ulong_t)&net_intf4_blacklist },
+	  .driver_info = RSVD(4) },
 	{ USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_CHU_720I),
-	  .driver_info = (kernel_ulong_t)&net_intf0_blacklist },
+	  .driver_info = RSVD(0) },
 	{ USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_7212),
-	  .driver_info = (kernel_ulong_t)&net_intf0_blacklist },
+	  .driver_info = RSVD(0) },
 	{ USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_7213),
-	  .driver_info = (kernel_ulong_t)&net_intf0_blacklist },
+	  .driver_info = RSVD(0) },
 	{ USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_7251),
-	  .driver_info = (kernel_ulong_t)&net_intf1_blacklist },
+	  .driver_info = RSVD(1) },
 	{ USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_7252),
-	  .driver_info = (kernel_ulong_t)&net_intf1_blacklist },
+	  .driver_info = RSVD(1) },
 	{ USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_7253),
-	  .driver_info = (kernel_ulong_t)&net_intf1_blacklist },
+	  .driver_info = RSVD(1) },
 	{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_UC864E) },
 	{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_UC864G) },
 	{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_CC864_DUAL) },
@@ -1258,38 +1122,38 @@ static const struct usb_device_id option
 	{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_DE910_DUAL) },
 	{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_UE910_V2) },
 	{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_LE922_USBCFG0),
-		.driver_info = (kernel_ulong_t)&telit_le922_blacklist_usbcfg0 },
+	  .driver_info = RSVD(0) | RSVD(1) | NCTRL(2) | RSVD(3) },
 	{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_LE922_USBCFG1),
-		.driver_info = (kernel_ulong_t)&telit_le910_blacklist },
+	  .driver_info = NCTRL(0) | RSVD(1) | RSVD(2) },
 	{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_LE922_USBCFG2),
-		.driver_info = (kernel_ulong_t)&telit_le922_blacklist_usbcfg3 },
+	  .driver_info = NCTRL(0) | RSVD(1) | RSVD(2) | RSVD(3) },
 	{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_LE922_USBCFG3),
-		.driver_info = (kernel_ulong_t)&telit_le922_blacklist_usbcfg3 },
+	  .driver_info = NCTRL(0) | RSVD(1) | RSVD(2) | RSVD(3) },
 	{ USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, TELIT_PRODUCT_LE922_USBCFG5, 0xff),
-		.driver_info = (kernel_ulong_t)&telit_le922_blacklist_usbcfg0 },
+	  .driver_info = RSVD(0) | RSVD(1) | NCTRL(2) | RSVD(3) },
 	{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_ME910),
-		.driver_info = (kernel_ulong_t)&telit_me910_blacklist },
+	  .driver_info = NCTRL(0) | RSVD(1) | RSVD(3) },
 	{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_ME910_DUAL_MODEM),
-		.driver_info = (kernel_ulong_t)&telit_me910_dual_modem_blacklist },
+	  .driver_info = NCTRL(0) | RSVD(3) },
 	{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_LE910),
-		.driver_info = (kernel_ulong_t)&telit_le910_blacklist },
+	  .driver_info = NCTRL(0) | RSVD(1) | RSVD(2) },
 	{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_LE910_USBCFG4),
-		.driver_info = (kernel_ulong_t)&telit_le922_blacklist_usbcfg3 },
+	  .driver_info = NCTRL(0) | RSVD(1) | RSVD(2) | RSVD(3) },
 	{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_LE920),
-		.driver_info = (kernel_ulong_t)&telit_le920_blacklist },
+	  .driver_info = NCTRL(0) | RSVD(1) | RSVD(5) },
 	{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_LE920A4_1207) },
 	{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_LE920A4_1208),
-		.driver_info = (kernel_ulong_t)&telit_le920a4_blacklist_1 },
+	  .driver_info = NCTRL(0) | RSVD(1) },
 	{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_LE920A4_1211),
-		.driver_info = (kernel_ulong_t)&telit_le922_blacklist_usbcfg3 },
+	  .driver_info = NCTRL(0) | RSVD(1) | RSVD(2) | RSVD(3) },
 	{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_LE920A4_1212),
-		.driver_info = (kernel_ulong_t)&telit_le920a4_blacklist_1 },
+	  .driver_info = NCTRL(0) | RSVD(1) },
 	{ USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, TELIT_PRODUCT_LE920A4_1213, 0xff) },
 	{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_LE920A4_1214),
-		.driver_info = (kernel_ulong_t)&telit_le922_blacklist_usbcfg3 },
+	  .driver_info = NCTRL(0) | RSVD(1) | RSVD(2) | RSVD(3) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_MF622, 0xff, 0xff, 0xff) }, /* ZTE WCDMA products */
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0002, 0xff, 0xff, 0xff),
-		.driver_info = (kernel_ulong_t)&net_intf1_blacklist },
+	  .driver_info = RSVD(1) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0003, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0004, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0005, 0xff, 0xff, 0xff) },
@@ -1305,58 +1169,58 @@ static const struct usb_device_id option
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0010, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0011, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0012, 0xff, 0xff, 0xff),
-		.driver_info = (kernel_ulong_t)&net_intf1_blacklist },
+	  .driver_info = RSVD(1) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0013, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_MF628, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0016, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0017, 0xff, 0xff, 0xff),
-		.driver_info = (kernel_ulong_t)&net_intf3_blacklist },
+	  .driver_info = RSVD(3) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0018, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0019, 0xff, 0xff, 0xff),
-		.driver_info = (kernel_ulong_t)&net_intf3_blacklist },
+	  .driver_info = RSVD(3) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0020, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0021, 0xff, 0xff, 0xff),
-		.driver_info = (kernel_ulong_t)&net_intf4_blacklist },
+	  .driver_info = RSVD(4) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0022, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0023, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0024, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0025, 0xff, 0xff, 0xff),
-		.driver_info = (kernel_ulong_t)&net_intf1_blacklist },
+	  .driver_info = RSVD(1) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0028, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0029, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0030, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_MF626, 0xff,
-	  0xff, 0xff), .driver_info = (kernel_ulong_t)&zte_mf626_blacklist },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_MF626, 0xff, 0xff, 0xff),
+	  .driver_info = NCTRL(0) | NCTRL(1) | RSVD(4) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0032, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0033, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0034, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0037, 0xff, 0xff, 0xff),
-		.driver_info = (kernel_ulong_t)&zte_0037_blacklist },
+	  .driver_info = NCTRL(0) | NCTRL(1) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0038, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0039, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0040, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0042, 0xff, 0xff, 0xff),
-		.driver_info = (kernel_ulong_t)&net_intf4_blacklist },
+	  .driver_info = RSVD(4) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0043, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0044, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0048, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0049, 0xff, 0xff, 0xff),
-		.driver_info = (kernel_ulong_t)&net_intf5_blacklist },
+	  .driver_info = RSVD(5) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0050, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0051, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0052, 0xff, 0xff, 0xff),
-		.driver_info = (kernel_ulong_t)&net_intf4_blacklist },
+	  .driver_info = RSVD(4) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0054, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0055, 0xff, 0xff, 0xff),
-		.driver_info = (kernel_ulong_t)&net_intf1_blacklist },
+	  .driver_info = RSVD(1) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0056, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0057, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0058, 0xff, 0xff, 0xff),
-		.driver_info = (kernel_ulong_t)&net_intf4_blacklist },
+	  .driver_info = RSVD(4) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0061, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0062, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0063, 0xff, 0xff, 0xff),
-		.driver_info = (kernel_ulong_t)&net_intf4_blacklist },
+	  .driver_info = RSVD(4) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0064, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0065, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0066, 0xff, 0xff, 0xff) },
@@ -1381,26 +1245,26 @@ static const struct usb_device_id option
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0096, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0097, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0104, 0xff, 0xff, 0xff),
-		.driver_info = (kernel_ulong_t)&net_intf4_blacklist },
+	  .driver_info = RSVD(4) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0105, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0106, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0108, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0113, 0xff, 0xff, 0xff),
-		.driver_info = (kernel_ulong_t)&net_intf5_blacklist },
+	  .driver_info = RSVD(5) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0117, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0118, 0xff, 0xff, 0xff),
-		.driver_info = (kernel_ulong_t)&net_intf5_blacklist },
+	  .driver_info = RSVD(5) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0121, 0xff, 0xff, 0xff),
-		.driver_info = (kernel_ulong_t)&net_intf5_blacklist },
+	  .driver_info = RSVD(5) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0122, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0123, 0xff, 0xff, 0xff),
-		.driver_info = (kernel_ulong_t)&net_intf4_blacklist },
+	  .driver_info = RSVD(4) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0124, 0xff, 0xff, 0xff),
-		.driver_info = (kernel_ulong_t)&net_intf5_blacklist },
+	  .driver_info = RSVD(5) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0125, 0xff, 0xff, 0xff),
-		.driver_info = (kernel_ulong_t)&net_intf6_blacklist },
+	  .driver_info = RSVD(6) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0126, 0xff, 0xff, 0xff),
-		.driver_info = (kernel_ulong_t)&net_intf5_blacklist },
+	  .driver_info = RSVD(5) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0128, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0135, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0136, 0xff, 0xff, 0xff) },
@@ -1416,50 +1280,50 @@ static const struct usb_device_id option
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0155, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0156, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0157, 0xff, 0xff, 0xff),
-	  .driver_info = (kernel_ulong_t)&net_intf5_blacklist },
+	  .driver_info = RSVD(5) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0158, 0xff, 0xff, 0xff),
-	  .driver_info = (kernel_ulong_t)&net_intf3_blacklist },
+	  .driver_info = RSVD(3) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0159, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0161, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0162, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0164, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0165, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0167, 0xff, 0xff, 0xff),
-	  .driver_info = (kernel_ulong_t)&net_intf4_blacklist },
+	  .driver_info = RSVD(4) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0189, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0191, 0xff, 0xff, 0xff), /* ZTE EuFi890 */
-	  .driver_info = (kernel_ulong_t)&net_intf4_blacklist },
+	  .driver_info = RSVD(4) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0196, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0197, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0199, 0xff, 0xff, 0xff), /* ZTE MF820S */
-	  .driver_info = (kernel_ulong_t)&net_intf1_blacklist },
+	  .driver_info = RSVD(1) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0200, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0201, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0254, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0257, 0xff, 0xff, 0xff), /* ZTE MF821 */
-	  .driver_info = (kernel_ulong_t)&net_intf3_blacklist },
+	  .driver_info = RSVD(3) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0265, 0xff, 0xff, 0xff), /* ONDA MT8205 */
-	  .driver_info = (kernel_ulong_t)&net_intf4_blacklist },
+	  .driver_info = RSVD(4) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0284, 0xff, 0xff, 0xff), /* ZTE MF880 */
-	  .driver_info = (kernel_ulong_t)&net_intf4_blacklist },
+	  .driver_info = RSVD(4) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0317, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0326, 0xff, 0xff, 0xff),
-	  .driver_info = (kernel_ulong_t)&net_intf4_blacklist },
+	  .driver_info = RSVD(4) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0330, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0395, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0412, 0xff, 0xff, 0xff), /* Telewell TW-LTE 4G */
-	  .driver_info = (kernel_ulong_t)&net_intf4_blacklist },
+	  .driver_info = RSVD(4) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0414, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0417, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1008, 0xff, 0xff, 0xff),
-	  .driver_info = (kernel_ulong_t)&net_intf4_blacklist },
+	  .driver_info = RSVD(4) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1010, 0xff, 0xff, 0xff),
-	  .driver_info = (kernel_ulong_t)&net_intf4_blacklist },
+	  .driver_info = RSVD(4) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1012, 0xff, 0xff, 0xff),
-	  .driver_info = (kernel_ulong_t)&net_intf4_blacklist },
+	  .driver_info = RSVD(4) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1018, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1021, 0xff, 0xff, 0xff),
-	  .driver_info = (kernel_ulong_t)&net_intf2_blacklist },
+	  .driver_info = RSVD(2) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1057, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1058, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1059, 0xff, 0xff, 0xff) },
@@ -1576,23 +1440,23 @@ static const struct usb_device_id option
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1170, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1244, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1245, 0xff, 0xff, 0xff),
-	  .driver_info = (kernel_ulong_t)&net_intf4_blacklist },
+	  .driver_info = RSVD(4) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1246, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1247, 0xff, 0xff, 0xff),
-	  .driver_info = (kernel_ulong_t)&net_intf4_blacklist },
+	  .driver_info = RSVD(4) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1248, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1249, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1250, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1251, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1252, 0xff, 0xff, 0xff),
-	  .driver_info = (kernel_ulong_t)&net_intf4_blacklist },
+	  .driver_info = RSVD(4) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1253, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1254, 0xff, 0xff, 0xff),
-	  .driver_info = (kernel_ulong_t)&net_intf4_blacklist },
+	  .driver_info = RSVD(4) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1255, 0xff, 0xff, 0xff),
-	  .driver_info = (kernel_ulong_t)&zte_1255_blacklist },
+	  .driver_info = RSVD(3) | RSVD(4) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1256, 0xff, 0xff, 0xff),
-	  .driver_info = (kernel_ulong_t)&net_intf4_blacklist },
+	  .driver_info = RSVD(4) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1257, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1258, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1259, 0xff, 0xff, 0xff) },
@@ -1607,7 +1471,7 @@ static const struct usb_device_id option
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1268, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1269, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1270, 0xff, 0xff, 0xff),
-	  .driver_info = (kernel_ulong_t)&net_intf5_blacklist },
+	  .driver_info = RSVD(5) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1271, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1272, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1273, 0xff, 0xff, 0xff) },
@@ -1643,17 +1507,17 @@ static const struct usb_device_id option
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1303, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1333, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1401, 0xff, 0xff, 0xff),
-		.driver_info = (kernel_ulong_t)&net_intf2_blacklist },
+	  .driver_info = RSVD(2) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1402, 0xff, 0xff, 0xff),
-		.driver_info = (kernel_ulong_t)&net_intf2_blacklist },
+	  .driver_info = RSVD(2) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1424, 0xff, 0xff, 0xff),
-		.driver_info = (kernel_ulong_t)&net_intf2_blacklist },
+	  .driver_info = RSVD(2) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1425, 0xff, 0xff, 0xff),
-		.driver_info = (kernel_ulong_t)&net_intf2_blacklist },
+	  .driver_info = RSVD(2) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1426, 0xff, 0xff, 0xff),  /* ZTE MF91 */
-		.driver_info = (kernel_ulong_t)&net_intf2_blacklist },
+	  .driver_info = RSVD(2) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1428, 0xff, 0xff, 0xff),  /* Telewell TW-LTE 4G v2 */
-		.driver_info = (kernel_ulong_t)&net_intf2_blacklist },
+	  .driver_info = RSVD(2) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1533, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1534, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1535, 0xff, 0xff, 0xff) },
@@ -1671,8 +1535,8 @@ static const struct usb_device_id option
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1596, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1598, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1600, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x2002, 0xff,
-	  0xff, 0xff), .driver_info = (kernel_ulong_t)&zte_k3765_z_blacklist },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x2002, 0xff, 0xff, 0xff),
+	  .driver_info = NCTRL(0) | NCTRL(1) | NCTRL(2) | RSVD(4) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x2003, 0xff, 0xff, 0xff) },
 
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0014, 0xff, 0xff, 0xff) }, /* ZTE CDMA products */
@@ -1683,20 +1547,20 @@ static const struct usb_device_id option
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0073, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0094, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0130, 0xff, 0xff, 0xff),
-		.driver_info = (kernel_ulong_t)&net_intf1_blacklist },
+	  .driver_info = RSVD(1) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0133, 0xff, 0xff, 0xff),
-		.driver_info = (kernel_ulong_t)&net_intf3_blacklist },
+	  .driver_info = RSVD(3) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0141, 0xff, 0xff, 0xff),
-		.driver_info = (kernel_ulong_t)&net_intf5_blacklist },
+	  .driver_info = RSVD(5) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0147, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0152, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0168, 0xff, 0xff, 0xff),
-		.driver_info = (kernel_ulong_t)&net_intf4_blacklist },
+	  .driver_info = RSVD(4) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0170, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0176, 0xff, 0xff, 0xff),
-		.driver_info = (kernel_ulong_t)&net_intf3_blacklist },
+	  .driver_info = RSVD(3) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0178, 0xff, 0xff, 0xff),
-		.driver_info = (kernel_ulong_t)&net_intf3_blacklist },
+	  .driver_info = RSVD(3) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff42, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff43, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff44, 0xff, 0xff, 0xff) },
@@ -1848,19 +1712,19 @@ static const struct usb_device_id option
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_AC2726, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_AC8710T, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_MC2718, 0xff, 0xff, 0xff),
-	 .driver_info = (kernel_ulong_t)&zte_mc2718_z_blacklist },
+	 .driver_info = NCTRL(1) | NCTRL(2) | NCTRL(3) | NCTRL(4) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_AD3812, 0xff, 0xff, 0xff),
-	 .driver_info = (kernel_ulong_t)&zte_ad3812_z_blacklist },
+	 .driver_info = NCTRL(0) | NCTRL(1) | NCTRL(2) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_MC2716, 0xff, 0xff, 0xff),
-	 .driver_info = (kernel_ulong_t)&zte_mc2716_z_blacklist },
+	 .driver_info = NCTRL(1) | NCTRL(2) | NCTRL(3) },
 	{ USB_DEVICE(ZTE_VENDOR_ID, ZTE_PRODUCT_ME3620_L),
-	 .driver_info = (kernel_ulong_t)&zte_me3620_xl_blacklist },
+	 .driver_info = RSVD(3) | RSVD(4) | RSVD(5) },
 	{ USB_DEVICE(ZTE_VENDOR_ID, ZTE_PRODUCT_ME3620_MBIM),
-	 .driver_info = (kernel_ulong_t)&zte_me3620_mbim_blacklist },
+	 .driver_info = RSVD(2) | RSVD(3) | RSVD(4) },
 	{ USB_DEVICE(ZTE_VENDOR_ID, ZTE_PRODUCT_ME3620_X),
-	 .driver_info = (kernel_ulong_t)&zte_me3620_xl_blacklist },
+	 .driver_info = RSVD(3) | RSVD(4) | RSVD(5) },
 	{ USB_DEVICE(ZTE_VENDOR_ID, ZTE_PRODUCT_ZM8620_X),
-	 .driver_info = (kernel_ulong_t)&zte_zm8620_x_blacklist },
+	 .driver_info = RSVD(3) | RSVD(4) | RSVD(5) },
 	{ USB_VENDOR_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff, 0x02, 0x01) },
 	{ USB_VENDOR_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff, 0x02, 0x05) },
 	{ USB_VENDOR_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff, 0x86, 0x10) },
@@ -1880,37 +1744,34 @@ static const struct usb_device_id option
 	{ USB_DEVICE(ALINK_VENDOR_ID, ALINK_PRODUCT_PH300) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ALINK_VENDOR_ID, ALINK_PRODUCT_3GU, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE(ALINK_VENDOR_ID, SIMCOM_PRODUCT_SIM7100E),
-	  .driver_info = (kernel_ulong_t)&simcom_sim7100e_blacklist },
+	  .driver_info = RSVD(5) | RSVD(6) },
 	{ USB_DEVICE(ALCATEL_VENDOR_ID, ALCATEL_PRODUCT_X060S_X200),
-	  .driver_info = (kernel_ulong_t)&alcatel_x200_blacklist
-	},
+	  .driver_info = NCTRL(0) | NCTRL(1) | RSVD(4) },
 	{ USB_DEVICE(ALCATEL_VENDOR_ID, ALCATEL_PRODUCT_X220_X500D),
-	  .driver_info = (kernel_ulong_t)&net_intf6_blacklist },
+	  .driver_info = RSVD(6) },
 	{ USB_DEVICE(ALCATEL_VENDOR_ID, 0x0052),
-	  .driver_info = (kernel_ulong_t)&net_intf6_blacklist },
+	  .driver_info = RSVD(6) },
 	{ USB_DEVICE(ALCATEL_VENDOR_ID, 0x00b6),
-	  .driver_info = (kernel_ulong_t)&net_intf3_blacklist },
+	  .driver_info = RSVD(3) },
 	{ USB_DEVICE(ALCATEL_VENDOR_ID, 0x00b7),
-	  .driver_info = (kernel_ulong_t)&net_intf5_blacklist },
+	  .driver_info = RSVD(5) },
 	{ USB_DEVICE(ALCATEL_VENDOR_ID, ALCATEL_PRODUCT_L100V),
-	  .driver_info = (kernel_ulong_t)&net_intf4_blacklist },
+	  .driver_info = RSVD(4) },
 	{ USB_DEVICE(ALCATEL_VENDOR_ID, ALCATEL_PRODUCT_L800MA),
-	  .driver_info = (kernel_ulong_t)&net_intf2_blacklist },
+	  .driver_info = RSVD(2) },
 	{ USB_DEVICE(AIRPLUS_VENDOR_ID, AIRPLUS_PRODUCT_MCD650) },
 	{ USB_DEVICE(TLAYTECH_VENDOR_ID, TLAYTECH_PRODUCT_TEU800) },
 	{ USB_DEVICE(LONGCHEER_VENDOR_ID, FOUR_G_SYSTEMS_PRODUCT_W14),
-  	  .driver_info = (kernel_ulong_t)&four_g_w14_blacklist
-  	},
+	  .driver_info = NCTRL(0) | NCTRL(1) },
 	{ USB_DEVICE(LONGCHEER_VENDOR_ID, FOUR_G_SYSTEMS_PRODUCT_W100),
-	  .driver_info = (kernel_ulong_t)&four_g_w100_blacklist
-	},
+	  .driver_info = NCTRL(1) | NCTRL(2) | RSVD(3) },
 	{USB_DEVICE(LONGCHEER_VENDOR_ID, FUJISOFT_PRODUCT_FS040U),
-	 .driver_info = (kernel_ulong_t)&net_intf3_blacklist},
+	 .driver_info = RSVD(3)},
 	{ USB_DEVICE_INTERFACE_CLASS(LONGCHEER_VENDOR_ID, SPEEDUP_PRODUCT_SU9800, 0xff) },
 	{ USB_DEVICE_INTERFACE_CLASS(LONGCHEER_VENDOR_ID, 0x9801, 0xff),
-	  .driver_info = (kernel_ulong_t)&net_intf3_blacklist },
+	  .driver_info = RSVD(3) },
 	{ USB_DEVICE_INTERFACE_CLASS(LONGCHEER_VENDOR_ID, 0x9803, 0xff),
-	  .driver_info = (kernel_ulong_t)&net_intf4_blacklist },
+	  .driver_info = RSVD(4) },
 	{ USB_DEVICE(LONGCHEER_VENDOR_ID, ZOOM_PRODUCT_4597) },
 	{ USB_DEVICE(LONGCHEER_VENDOR_ID, IBALL_3_5G_CONNECT) },
 	{ USB_DEVICE(HAIER_VENDOR_ID, HAIER_PRODUCT_CE100) },
@@ -1936,14 +1797,14 @@ static const struct usb_device_id option
 	{ USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_EU3_E) },
 	{ USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_EU3_P) },
 	{ USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_PH8),
-		.driver_info = (kernel_ulong_t)&net_intf4_blacklist },
+	  .driver_info = RSVD(4) },
 	{ USB_DEVICE_INTERFACE_CLASS(CINTERION_VENDOR_ID, CINTERION_PRODUCT_AHXX, 0xff) },
 	{ USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_PLXX),
-		.driver_info = (kernel_ulong_t)&net_intf4_blacklist },
+	  .driver_info = RSVD(4) },
 	{ USB_DEVICE_INTERFACE_CLASS(CINTERION_VENDOR_ID, CINTERION_PRODUCT_PH8_2RMNET, 0xff),
-		.driver_info = (kernel_ulong_t)&cinterion_rmnet2_blacklist },
+	  .driver_info = RSVD(4) | RSVD(5) },
 	{ USB_DEVICE_INTERFACE_CLASS(CINTERION_VENDOR_ID, CINTERION_PRODUCT_PH8_AUDIO, 0xff),
-		.driver_info = (kernel_ulong_t)&net_intf4_blacklist },
+	  .driver_info = RSVD(4) },
 	{ USB_DEVICE_INTERFACE_CLASS(CINTERION_VENDOR_ID, CINTERION_PRODUCT_AHXX_2RMNET, 0xff) },
 	{ USB_DEVICE_INTERFACE_CLASS(CINTERION_VENDOR_ID, CINTERION_PRODUCT_AHXX_AUDIO, 0xff) },
 	{ USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_HC28_MDM) },
@@ -1953,20 +1814,20 @@ static const struct usb_device_id option
 	{ USB_DEVICE(SIEMENS_VENDOR_ID, CINTERION_PRODUCT_HC28_MDM) }, /* HC28 enumerates with Siemens or Cinterion VID depending on FW revision */
 	{ USB_DEVICE(SIEMENS_VENDOR_ID, CINTERION_PRODUCT_HC28_MDMNET) },
 	{ USB_DEVICE(OLIVETTI_VENDOR_ID, OLIVETTI_PRODUCT_OLICARD100),
-		.driver_info = (kernel_ulong_t)&net_intf4_blacklist },
+	  .driver_info = RSVD(4) },
 	{ USB_DEVICE(OLIVETTI_VENDOR_ID, OLIVETTI_PRODUCT_OLICARD120),
-		.driver_info = (kernel_ulong_t)&net_intf4_blacklist },
+	  .driver_info = RSVD(4) },
 	{ USB_DEVICE(OLIVETTI_VENDOR_ID, OLIVETTI_PRODUCT_OLICARD140),
-		.driver_info = (kernel_ulong_t)&net_intf4_blacklist },
+	  .driver_info = RSVD(4) },
 	{ USB_DEVICE(OLIVETTI_VENDOR_ID, OLIVETTI_PRODUCT_OLICARD145) },
 	{ USB_DEVICE(OLIVETTI_VENDOR_ID, OLIVETTI_PRODUCT_OLICARD155),
-		.driver_info = (kernel_ulong_t)&net_intf6_blacklist },
+	  .driver_info = RSVD(6) },
 	{ USB_DEVICE(OLIVETTI_VENDOR_ID, OLIVETTI_PRODUCT_OLICARD200),
-		.driver_info = (kernel_ulong_t)&net_intf6_blacklist },
+	  .driver_info = RSVD(6) },
 	{ USB_DEVICE(OLIVETTI_VENDOR_ID, OLIVETTI_PRODUCT_OLICARD160),
-		.driver_info = (kernel_ulong_t)&net_intf6_blacklist },
+	  .driver_info = RSVD(6) },
 	{ USB_DEVICE(OLIVETTI_VENDOR_ID, OLIVETTI_PRODUCT_OLICARD500),
-		.driver_info = (kernel_ulong_t)&net_intf4_blacklist },
+	  .driver_info = RSVD(4) },
 	{ USB_DEVICE(CELOT_VENDOR_ID, CELOT_PRODUCT_CT680M) }, /* CT-650 CDMA 450 1xEVDO modem */
 	{ USB_DEVICE_AND_INTERFACE_INFO(SAMSUNG_VENDOR_ID, SAMSUNG_PRODUCT_GT_B3730, USB_CLASS_CDC_DATA, 0x00, 0x00) }, /* Samsung GT-B3730 LTE USB modem.*/
 	{ USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CEM600) },
@@ -2043,9 +1904,9 @@ static const struct usb_device_id option
 	{ USB_DEVICE(PETATEL_VENDOR_ID, PETATEL_PRODUCT_NP10T_600E) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(TPLINK_VENDOR_ID, TPLINK_PRODUCT_LTE, 0xff, 0x00, 0x00) },	/* TP-Link LTE Module */
 	{ USB_DEVICE(TPLINK_VENDOR_ID, TPLINK_PRODUCT_MA180),
-	  .driver_info = (kernel_ulong_t)&net_intf4_blacklist },
+	  .driver_info = RSVD(4) },
 	{ USB_DEVICE(TPLINK_VENDOR_ID, 0x9000),					/* TP-Link MA260 */
-	  .driver_info = (kernel_ulong_t)&net_intf4_blacklist },
+	  .driver_info = RSVD(4) },
 	{ USB_DEVICE(CHANGHONG_VENDOR_ID, CHANGHONG_PRODUCT_CH690) },
 	{ USB_DEVICE_INTERFACE_CLASS(0x2001, 0x7d01, 0xff) },			/* D-Link DWM-156 (variant) */
 	{ USB_DEVICE_INTERFACE_CLASS(0x2001, 0x7d02, 0xff) },
@@ -2053,9 +1914,9 @@ static const struct usb_device_id option
 	{ USB_DEVICE_INTERFACE_CLASS(0x2001, 0x7d04, 0xff) },			/* D-Link DWM-158 */
 	{ USB_DEVICE_INTERFACE_CLASS(0x2001, 0x7d0e, 0xff) },			/* D-Link DWM-157 C1 */
 	{ USB_DEVICE_INTERFACE_CLASS(0x2001, 0x7e19, 0xff),			/* D-Link DWM-221 B1 */
-	  .driver_info = (kernel_ulong_t)&net_intf4_blacklist },
+	  .driver_info = RSVD(4) },
 	{ USB_DEVICE_INTERFACE_CLASS(0x2001, 0x7e35, 0xff),			/* D-Link DWM-222 */
-	  .driver_info = (kernel_ulong_t)&net_intf4_blacklist },
+	  .driver_info = RSVD(4) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(0x07d1, 0x3e01, 0xff, 0xff, 0xff) }, /* D-Link DWM-152/C1 */
 	{ USB_DEVICE_AND_INTERFACE_INFO(0x07d1, 0x3e02, 0xff, 0xff, 0xff) }, /* D-Link DWM-156/C1 */
 	{ USB_DEVICE_AND_INTERFACE_INFO(0x07d1, 0x7e11, 0xff, 0xff, 0xff) }, /* D-Link DWM-156/A3 */
@@ -2115,7 +1976,7 @@ static int option_probe(struct usb_seria
 	struct usb_interface_descriptor *iface_desc =
 				&serial->interface->cur_altsetting->desc;
 	struct usb_device_descriptor *dev_desc = &serial->dev->descriptor;
-	const struct option_blacklist_info *blacklist;
+	unsigned long device_flags = id->driver_info;
 
 	/* Never bind to the CD-Rom emulation interface	*/
 	if (iface_desc->bInterfaceClass == 0x08)
@@ -2126,9 +1987,7 @@ static int option_probe(struct usb_seria
 	 * the same class/subclass/protocol as the serial interfaces.  Look at
 	 * the Windows driver .INF files for reserved interface numbers.
 	 */
-	blacklist = (void *)id->driver_info;
-	if (blacklist && test_bit(iface_desc->bInterfaceNumber,
-						&blacklist->reserved))
+	if (device_flags & RSVD(iface_desc->bInterfaceNumber))
 		return -ENODEV;
 	/*
 	 * Don't bind network interface on Samsung GT-B3730, it is handled by
@@ -2139,8 +1998,8 @@ static int option_probe(struct usb_seria
 	    iface_desc->bInterfaceClass != USB_CLASS_CDC_DATA)
 		return -ENODEV;
 
-	/* Store the blacklist info so we can use it during attach. */
-	usb_set_serial_data(serial, (void *)blacklist);
+	/* Store the device flags so we can use them during attach. */
+	usb_set_serial_data(serial, (void *)device_flags);
 
 	return 0;
 }
@@ -2148,22 +2007,21 @@ static int option_probe(struct usb_seria
 static int option_attach(struct usb_serial *serial)
 {
 	struct usb_interface_descriptor *iface_desc;
-	const struct option_blacklist_info *blacklist;
 	struct usb_wwan_intf_private *data;
+	unsigned long device_flags;
 
 	data = kzalloc(sizeof(struct usb_wwan_intf_private), GFP_KERNEL);
 	if (!data)
 		return -ENOMEM;
 
-	/* Retrieve blacklist info stored at probe. */
-	blacklist = usb_get_serial_data(serial);
+	/* Retrieve device flags stored at probe. */
+	device_flags = (unsigned long)usb_get_serial_data(serial);
 
 	iface_desc = &serial->interface->cur_altsetting->desc;
 
-	if (!blacklist || !test_bit(iface_desc->bInterfaceNumber,
-						&blacklist->sendsetup)) {
+	if (!(device_flags & NCTRL(iface_desc->bInterfaceNumber)))
 		data->use_send_setup = 1;
-	}
+
 	spin_lock_init(&data->susp_lock);
 
 	usb_set_serial_data(serial, data);
author maintainer
#40 lore raw

PATCH 40/52 USB: serial: option: adding support for ublox R410M

In reply to Greg Kroah-Hartman

4.16-stable review patch. If anyone has any objections, please let me know.

------------------

From: SZ Lin (林上智) <[email protected]>

commit 4205cb01f6e9ef2ae6daa7be4e8ac1edeb4c9d64 upstream.

This patch adds support for ublox R410M PID 0x90b2 USB modem to option driver, this module supports LTE Cat M1 / NB1.

Interface layout:
0: QCDM/DIAG
1: ADB
2: AT
3: RMNET

---
 drivers/usb/serial/option.c |    5 +++++
 1 file changed, 5 insertions(+)
drivers/usb/serial/option.c +5 -0
@@ -233,6 +233,8 @@ static void option_instat_callback(struc
 /* These Quectel products use Qualcomm's vendor ID */
 #define QUECTEL_PRODUCT_UC20			0x9003
 #define QUECTEL_PRODUCT_UC15			0x9090
+/* These u-blox products use Qualcomm's vendor ID */
+#define UBLOX_PRODUCT_R410M			0x90b2
 /* These Yuga products use Qualcomm's vendor ID */
 #define YUGA_PRODUCT_CLM920_NC5			0x9625
 
@@ -1065,6 +1067,9 @@ static const struct usb_device_id option
 	/* Yuga products use Qualcomm vendor ID */
 	{ USB_DEVICE(QUALCOMM_VENDOR_ID, YUGA_PRODUCT_CLM920_NC5),
 	  .driver_info = RSVD(1) | RSVD(4) },
+	/* u-blox products using Qualcomm vendor ID */
+	{ USB_DEVICE(QUALCOMM_VENDOR_ID, UBLOX_PRODUCT_R410M),
+	  .driver_info = RSVD(1) | RSVD(3) },
 	/* Quectel products using Quectel vendor ID */
 	{ USB_DEVICE(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EC21),
 	  .driver_info = RSVD(4) },
author maintainer
#41 lore raw

PATCH 41/52 usb: musb: host: fix potential NULL pointer dereference

In reply to Greg Kroah-Hartman

4.16-stable review patch. If anyone has any objections, please let me know.

------------------

From: Bin Liu <[email protected]>

commit 2b63f1329df2cd814c1f8353fae4853ace6521d1 upstream.

musb_start_urb() doesn't check the pass-in parameter if it is NULL. But in musb_bulk_nak_timeout() the parameter passed to musb_start_urb() is returned from first_qh(), which could be NULL.

So wrap the musb_start_urb() call here with a if condition check to avoid the potential NULL pointer dereference.

Fixes f283862f3b5c ("usb: musb: NAK timeout scheme on bulk TX endpoint")
---
 drivers/usb/musb/musb_host.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)
drivers/usb/musb/musb_host.c +3 -1
@@ -996,7 +996,9 @@ static void musb_bulk_nak_timeout(struct
 			/* set tx_reinit and schedule the next qh */
 			ep->tx_reinit = 1;
 		}
-		musb_start_urb(musb, is_in, next_qh);
+
+		if (next_qh)
+			musb_start_urb(musb, is_in, next_qh);
 	}
 }
 
author maintainer
#42 lore raw

PATCH 42/52 usb: musb: trace: fix NULL pointer dereference in musb_g_tx()

In reply to Greg Kroah-Hartman

4.16-stable review patch. If anyone has any objections, please let me know.

------------------

From: Bin Liu <[email protected]>

commit 9aea9b6cc78d2b99b23d84fb2e0bc6e464c6569e upstream.

The usb_request pointer could be NULL in musb_g_tx(), where the tracepoint call would trigger the NULL pointer dereference failure when parsing the members of the usb_request pointer.

Move the tracepoint call to where the usb_request pointer is already checked to solve the issue.

Fixes fc78003e5345 ("usb: musb: gadget: add usb-request tracepoints")
---
 drivers/usb/musb/musb_gadget.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
drivers/usb/musb/musb_gadget.c +2 -1
@@ -417,7 +417,6 @@ void musb_g_tx(struct musb *musb, u8 epn
 	req = next_request(musb_ep);
 	request = &req->request;
 
-	trace_musb_req_tx(req);
 	csr = musb_readw(epio, MUSB_TXCSR);
 	musb_dbg(musb, "<== %s, txcsr %04x", musb_ep->end_point.name, csr);
 
@@ -456,6 +455,8 @@ void musb_g_tx(struct musb *musb, u8 epn
 		u8	is_dma = 0;
 		bool	short_packet = false;
 
+		trace_musb_req_tx(req);
+
 		if (dma && (csr & MUSB_TXCSR_DMAENAB)) {
 			is_dma = 1;
 			csr |= MUSB_TXCSR_P_WZC_BITS;
author maintainer
#43 lore raw

PATCH 43/52 platform/x86: asus-wireless: Fix NULL pointer dereference

In reply to Greg Kroah-Hartman

4.16-stable review patch. If anyone has any objections, please let me know.

------------------

From: João Paulo Rechi Vita <[email protected]>

commit 9f0a93de9139c2b0a59299cd36b61564522458f8 upstream.

When the module is removed the led workqueue is destroyed in the remove callback, before the led device is unregistered from the led subsystem.

This leads to a NULL pointer derefence when the led device is unregistered automatically later as part of the module removal cleanup. Bellow is the backtrace showing the problem.

  BUG: unable to handle kernel NULL pointer dereference at           (null)
  IP: __queue_work+0x8c/0x410
  PGD 0 P4D 0
  Oops: 0000 [#1] SMP NOPTI
  Modules linked in: ccm edac_mce_amd kvm_amd kvm irqbypass crct10dif_pclmul crc32_pclmul ghash_clmulni_intel pcbc aesni_intel aes_x86_64 joydev crypto_simd asus_nb_wmi glue_helper uvcvideo snd_hda_codec_conexant snd_hda_codec_generic snd_hda_codec_hdmi snd_hda_intel asus_wmi snd_hda_codec cryptd snd_hda_core sparse_keymap videobuf2_vmalloc arc4 videobuf2_memops snd_hwdep input_leds videobuf2_v4l2 ath9k psmouse videobuf2_core videodev ath9k_common snd_pcm ath9k_hw media fam15h_power ath k10temp snd_timer mac80211 i2c_piix4 r8169 mii mac_hid cfg80211 asus_wireless(-) snd soundcore wmi shpchp 8250_dw ip_tables x_tables amdkfd amd_iommu_v2 amdgpu radeon chash i2c_algo_bit drm_kms_helper syscopyarea serio_raw sysfillrect sysimgblt fb_sys_fops ahci ttm libahci drm video
  CPU: 3 PID: 2177 Comm: rmmod Not tainted 4.15.0-5-generic #6+dev94.b4287e5bem1-Endless
  Hardware name: ASUSTeK COMPUTER INC. X555DG/X555DG, BIOS 5.011 05/05/2015
  RIP: 0010:__queue_work+0x8c/0x410
  RSP: 0018:ffffbe8cc249fcd8 EFLAGS: 00010086
  RAX: ffff992ac6810800 RBX: 0000000000000000 RCX: 0000000000000008
  RDX: 0000000000000000 RSI: 0000000000000008 RDI: ffff992ac6400e18
  RBP: ffffbe8cc249fd18 R08: ffff992ac6400db0 R09: 0000000000000000
  R10: 0000000000000040 R11: ffff992ac6400dd8 R12: 0000000000002000
  R13: ffff992abd762e00 R14: ffff992abd763e38 R15: 000000000001ebe0
  FS:  00007f318203e700(0000) GS:ffff992aced80000(0000) knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: 0000000000000000 CR3: 00000001c720e000 CR4: 00000000001406e0
  Call Trace:
   queue_work_on+0x38/0x40
   led_state_set+0x2c/0x40 [asus_wireless]
   led_set_brightness_nopm+0x14/0x40
   led_set_brightness+0x37/0x60
   led_trigger_set+0xfc/0x1d0
   led_classdev_unregister+0x32/0xd0
   devm_led_classdev_release+0x11/0x20
   release_nodes+0x109/0x1f0
   devres_release_all+0x3c/0x50
   device_release_driver_internal+0x16d/0x220
   driver_detach+0x3f/0x80
   bus_remove_driver+0x55/0xd0
   driver_unregister+0x2c/0x40
   acpi_bus_unregister_driver+0x15/0x20
   asus_wireless_driver_exit+0x10/0xb7c [asus_wireless]
   SyS_delete_module+0x1da/0x2b0
   entry_SYSCALL_64_fastpath+0x24/0x87
  RIP: 0033:0x7f3181b65fd7
  RSP: 002b:00007ffe74bcbe18 EFLAGS: 00000206 ORIG_RAX: 00000000000000b0
  RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f3181b65fd7
  RDX: 000000000000000a RSI: 0000000000000800 RDI: 0000555ea2559258
  RBP: 0000555ea25591f0 R08: 00007ffe74bcad91 R09: 000000000000000a
  R10: 0000000000000000 R11: 0000000000000206 R12: 0000000000000003
  R13: 00007ffe74bcae00 R14: 0000000000000000 R15: 0000555ea25591f0
  Code: 01 00 00 02 0f 85 7d 01 00 00 48 63 45 d4 48 c7 c6 00 f4 fa 87 49 8b 9d 08 01 00 00 48 03 1c c6 4c 89 f7 e8 87 fb ff ff 48 85 c0 <48> 8b 3b 0f 84 c5 01 00 00 48 39 f8 0f 84 bc 01 00 00 48 89 c7
  RIP: __queue_work+0x8c/0x410 RSP: ffffbe8cc249fcd8
  CR2: 0000000000000000
  ---[ end trace 7aa4f4a232e9c39c ]---

Unregistering the led device on the remove callback before destroying the workqueue avoids this problem.

https://bugzilla.kernel.org/show_bug.cgi?id=196097

---
 drivers/platform/x86/asus-wireless.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)
drivers/platform/x86/asus-wireless.c +3 -1
@@ -178,8 +178,10 @@ static int asus_wireless_remove(struct a
 {
 	struct asus_wireless_data *data = acpi_driver_data(adev);
 
-	if (data->wq)
+	if (data->wq) {
+		devm_led_classdev_unregister(&adev->dev, &data->led);
 		destroy_workqueue(data->wq);
+	}
 	return 0;
 }
 
author maintainer
#44 lore raw

PATCH 44/52 platform/x86: Kconfig: Fix dell-laptop dependency chain.

In reply to Greg Kroah-Hartman

4.16-stable review patch. If anyone has any objections, please let me know.

------------------

From: Mario Limonciello <[email protected]>

commit 7fe3fa3b5ec8e75389cce4bf5d052a52e6198d59 upstream.

As reported by Randy Dunlap:

Quoted 11 lines
Quoted 11 lines

WARNING: unmet direct dependencies detected for DELL_SMBIOS
Depends on [m]: X86 [=y] && X86_PLATFORM_DEVICES [=y]

	&& (DCDBAS [=m] ||

DCDBAS [=m]=n) && (ACPI_WMI [=n] || ACPI_WMI [=n]=n)
Selected by [y]:
- DELL_LAPTOP [=y] && X86 [=y] && X86_PLATFORM_DEVICES [=y]
&& DMI [=y]
&& BACKLIGHT_CLASS_DEVICE [=y] && (ACPI_VIDEO [=n] ||

	ACPI_VIDEO [=n]=n)

&& (RFKILL [=n] || RFKILL [=n]=n) && SERIO_I8042 [=y]

Right now it's possible to set dell laptop to compile in but this causes dell-smbios to compile in which breaks if dcdbas is a module.

Dell laptop shouldn't select dell-smbios anymore, but depend on it.

Fixes 32d7b19bad96 (platform/x86: dell-smbios: Resolve dependency error on DCDBAS)
---
 drivers/platform/x86/Kconfig |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/platform/x86/Kconfig +1 -1
@@ -154,7 +154,7 @@ config DELL_LAPTOP
 	depends on ACPI_VIDEO || ACPI_VIDEO = n
 	depends on RFKILL || RFKILL = n
 	depends on SERIO_I8042
-	select DELL_SMBIOS
+	depends on DELL_SMBIOS
 	select POWER_SUPPLY
 	select LEDS_CLASS
 	select NEW_LEDS
author maintainer
#45 lore raw

PATCH 45/52 KVM: x86: remove APIC Timer periodic/oneshot spikes

In reply to Greg Kroah-Hartman

4.16-stable review patch. If anyone has any objections, please let me know.

------------------

From: Anthoine Bourgeois <[email protected]>

commit ecf08dad723d3e000aecff6c396f54772d124733 upstream.

Since the commit "8003c9ae204e: add APIC Timer periodic/oneshot mode VMX preemption timer support", a Windows 10 guest has some erratic timer spikes.

Here the results on a 150000 times 1ms timer without any load:

	  Before 8003c9ae204e | After 8003c9ae204e
Max           1834us          |  86000us
Mean          1100us          |   1021us
Deviation       59us          |    149us
Here the results on a 150000 times 1ms timer with a cpu-z stress test:
	  Before 8003c9ae204e | After 8003c9ae204e
Max          32000us          | 140000us
Mean          1006us          |   1997us
Deviation      140us          |  11095us

The root cause of the problem is starting hrtimer with an expiry time already in the past can take more than 20 milliseconds to trigger the timer function. It can be solved by forward such past timers immediately, rather than submitting them to hrtimer_start(). In case the timer is periodic, update the target expiration and call hrtimer_start with it.

v2: Check if the tsc deadline is already expired. Thank you Mika.
v3: Execute the past timers immediately rather than submitting them to hrtimer_start().
v4: Rearm the periodic timer with advance_periodic_target_expiration() a simpler version of set_target_expiration(). Thank you Paolo.

8003c9ae204e ("KVM: LAPIC: add APIC Timer periodic/oneshot mode VMX preemption timer support")

---
 arch/x86/kvm/lapic.c |   37 ++++++++++++++++++++-----------------
 1 file changed, 20 insertions(+), 17 deletions(-)
arch/x86/kvm/lapic.c +20 -17
@@ -1455,23 +1455,6 @@ static void start_sw_tscdeadline(struct
 	local_irq_restore(flags);
 }
 
-static void start_sw_period(struct kvm_lapic *apic)
-{
-	if (!apic->lapic_timer.period)
-		return;
-
-	if (apic_lvtt_oneshot(apic) &&
-	    ktime_after(ktime_get(),
-			apic->lapic_timer.target_expiration)) {
-		apic_timer_expired(apic);
-		return;
-	}
-
-	hrtimer_start(&apic->lapic_timer.timer,
-		apic->lapic_timer.target_expiration,
-		HRTIMER_MODE_ABS_PINNED);
-}
-
 static void update_target_expiration(struct kvm_lapic *apic, uint32_t old_divisor)
 {
 	ktime_t now, remaining;
@@ -1538,6 +1521,26 @@ static void advance_periodic_target_expi
 				apic->lapic_timer.period);
 }
 
+static void start_sw_period(struct kvm_lapic *apic)
+{
+	if (!apic->lapic_timer.period)
+		return;
+
+	if (ktime_after(ktime_get(),
+			apic->lapic_timer.target_expiration)) {
+		apic_timer_expired(apic);
+
+		if (apic_lvtt_oneshot(apic))
+			return;
+
+		advance_periodic_target_expiration(apic);
+	}
+
+	hrtimer_start(&apic->lapic_timer.timer,
+		apic->lapic_timer.target_expiration,
+		HRTIMER_MODE_ABS_PINNED);
+}
+
 bool kvm_lapic_hv_timer_in_use(struct kvm_vcpu *vcpu)
 {
 	if (!lapic_in_kernel(vcpu))
author maintainer
#46 lore raw

PATCH 46/52 x86/tsc: Always unregister clocksource_tsc_early

In reply to Greg Kroah-Hartman

4.16-stable review patch. If anyone has any objections, please let me know.

------------------

From: Peter Zijlstra <[email protected]>

commit e9088adda13cd23249d4b0abb97ff8a81bf5573a upstream.

Don't leave the tsc-early clocksource registered if it errors out early.

This was reported by Diego, who on his Core2 era machine got TSC invalidated while it was running with tsc-early (due to C-states). This results in keeping tsc-early with very bad effects.

---
 arch/x86/kernel/tsc.c |   10 ++++++----
 1 file changed, 6 insertions(+), 4 deletions(-)
arch/x86/kernel/tsc.c +6 -4
@@ -1205,7 +1205,7 @@ static void tsc_refine_calibration_work(
 
 	/* Don't bother refining TSC on unstable systems */
 	if (tsc_unstable)
-		return;
+		goto unreg;
 
 	/*
 	 * Since the work is started early in boot, we may be
@@ -1258,11 +1258,12 @@ static void tsc_refine_calibration_work(
 
 out:
 	if (tsc_unstable)
-		return;
+		goto unreg;
 
 	if (boot_cpu_has(X86_FEATURE_ART))
 		art_related_clocksource = &clocksource_tsc;
 	clocksource_register_khz(&clocksource_tsc, tsc_khz);
+unreg:
 	clocksource_unregister(&clocksource_tsc_early);
 }
 
@@ -1272,8 +1273,8 @@ static int __init init_tsc_clocksource(v
 	if (!boot_cpu_has(X86_FEATURE_TSC) || tsc_disabled > 0 || !tsc_khz)
 		return 0;
 
-	if (check_tsc_unstable())
-		return 0;
+	if (tsc_unstable)
+		goto unreg;
 
 	if (tsc_clocksource_reliable)
 		clocksource_tsc.flags &= ~CLOCK_SOURCE_MUST_VERIFY;
@@ -1289,6 +1290,7 @@ static int __init init_tsc_clocksource(v
 		if (boot_cpu_has(X86_FEATURE_ART))
 			art_related_clocksource = &clocksource_tsc;
 		clocksource_register_khz(&clocksource_tsc, tsc_khz);
+unreg:
 		clocksource_unregister(&clocksource_tsc_early);
 		return 0;
 	}
author maintainer
#47 lore raw

PATCH 47/52 x86/tsc: Fix mark_tsc_unstable()

In reply to Greg Kroah-Hartman

4.16-stable review patch. If anyone has any objections, please let me know.

------------------

From: Peter Zijlstra <[email protected]>

commit e3b4f79025e0a4eb7e2a2c7d24dadfa1e38893b0 upstream.

mark_tsc_unstable() also needs to affect tsc_early, Now that clocksource_mark_unstable() can be used on a clocksource irrespective of its registration state, use it on both tsc_early and tsc.

This does however require cs->list to be initialized empty, otherwise it cannot tell the registation state before registation.

---
 arch/x86/kernel/tsc.c |   12 +++++-------
 1 file changed, 5 insertions(+), 7 deletions(-)
arch/x86/kernel/tsc.c +5 -7
@@ -1067,6 +1067,7 @@ static struct clocksource clocksource_ts
 	.resume			= tsc_resume,
 	.mark_unstable		= tsc_cs_mark_unstable,
 	.tick_stable		= tsc_cs_tick_stable,
+	.list			= LIST_HEAD_INIT(clocksource_tsc_early.list),
 };
 
 /*
@@ -1086,6 +1087,7 @@ static struct clocksource clocksource_ts
 	.resume			= tsc_resume,
 	.mark_unstable		= tsc_cs_mark_unstable,
 	.tick_stable		= tsc_cs_tick_stable,
+	.list			= LIST_HEAD_INIT(clocksource_tsc.list),
 };
 
 void mark_tsc_unstable(char *reason)
@@ -1098,13 +1100,9 @@ void mark_tsc_unstable(char *reason)
 		clear_sched_clock_stable();
 	disable_sched_clock_irqtime();
 	pr_info("Marking TSC unstable due to %s\n", reason);
-	/* Change only the rating, when not registered */
-	if (clocksource_tsc.mult) {
-		clocksource_mark_unstable(&clocksource_tsc);
-	} else {
-		clocksource_tsc.flags |= CLOCK_SOURCE_UNSTABLE;
-		clocksource_tsc.rating = 0;
-	}
+
+	clocksource_mark_unstable(&clocksource_tsc_early);
+	clocksource_mark_unstable(&clocksource_tsc);
 }
 
 EXPORT_SYMBOL_GPL(mark_tsc_unstable);
author maintainer
#48 lore raw

PATCH 48/52 irqchip/qcom: Fix check for spurious interrupts

In reply to Greg Kroah-Hartman

4.16-stable review patch. If anyone has any objections, please let me know.

------------------

From: Agustin Vega-Frias <[email protected]>

commit 1bc2463cee92ef0e2034c813d5e511adeb58b5fd upstream.

When the interrupts for a combiner span multiple registers it must be checked if any interrupts have been asserted on each register before checking for spurious interrupts.

Checking each register seperately leads to false positive warnings.

[ tglx: Massaged changelog ]

Fixes f20cc9b00c7b ("irqchip/qcom: Add IRQ combiner driver")
Cc Jason Cooper <[email protected]>
Cc Marc Zyngier <[email protected]>
Cc timur at codeaurora.org
Cc linux-arm-kernel at lists.infradead.org
Cc stable at vger.kernel.org
---
 drivers/irqchip/qcom-irq-combiner.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/irqchip/qcom-irq-combiner.c +2 -2
@@ -1,4 +1,4 @@
-/* Copyright (c) 2015-2016, The Linux Foundation. All rights reserved.
+/* Copyright (c) 2015-2018, The Linux Foundation. All rights reserved.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 and
@@ -68,7 +68,7 @@ static void combiner_handle_irq(struct i
 
 		bit = readl_relaxed(combiner->regs[reg].addr);
 		status = bit & combiner->regs[reg].enabled;
-		if (!status)
+		if (bit && !status)
 			pr_warn_ratelimited("Unexpected IRQ on CPU%d: (%08x %08lx %p)\n",
 					    smp_processor_id(), bit,
 					    combiner->regs[reg].enabled,
author maintainer
#49 lore raw

PATCH 49/52 clocksource: Allow clocksource_mark_unstable() on unregistered clocksources

In reply to Greg Kroah-Hartman

4.16-stable review patch. If anyone has any objections, please let me know.

------------------

From: Peter Zijlstra <[email protected]>

commit 2aae7bcfa4104b770e6f612356adb8d66c6144d6 upstream.

Because of how the code flips between tsc-early and tsc clocksources it might need to mark one or both unstable. The current code in mark_tsc_unstable() only worked because previously it registered the tsc clocksource once and then never touched it.

Since it now unregisters the tsc-early clocksource, it needs to know if a clocksource got unregistered and the current cs->mult test doesn't work for that. Instead use list_empty(&cs->list) to test for registration.

Furthermore, since clocksource_mark_unstable() needs to place the cs on the wd_list, it links the cs->list and cs->wd_list serialization. It must not see a clocsource registered (!empty cs->list) but already past dequeue_watchdog(). So place {en,de}queue{,_watchdog}() under the same lock.

Provided cs->list is initialized to empty, this then allows us to unconditionally use clocksource_mark_unstable(), regardless of the registration state.

---
 kernel/time/clocksource.c |   50 +++++++++++++++++++++++++++++++---------------
 1 file changed, 34 insertions(+), 16 deletions(-)
kernel/time/clocksource.c +34 -16
@@ -119,6 +119,16 @@ static DEFINE_SPINLOCK(watchdog_lock);
 static int watchdog_running;
 static atomic_t watchdog_reset_pending;
 
+static void inline clocksource_watchdog_lock(unsigned long *flags)
+{
+	spin_lock_irqsave(&watchdog_lock, *flags);
+}
+
+static void inline clocksource_watchdog_unlock(unsigned long *flags)
+{
+	spin_unlock_irqrestore(&watchdog_lock, *flags);
+}
+
 static int clocksource_watchdog_kthread(void *data);
 static void __clocksource_change_rating(struct clocksource *cs, int rating);
 
@@ -142,6 +152,9 @@ static void __clocksource_unstable(struc
 	cs->flags &= ~(CLOCK_SOURCE_VALID_FOR_HRES | CLOCK_SOURCE_WATCHDOG);
 	cs->flags |= CLOCK_SOURCE_UNSTABLE;
 
+	if (list_empty(&cs->list))
+		return;
+
 	if (cs->mark_unstable)
 		cs->mark_unstable(cs);
 
@@ -164,7 +177,7 @@ void clocksource_mark_unstable(struct cl
 
 	spin_lock_irqsave(&watchdog_lock, flags);
 	if (!(cs->flags & CLOCK_SOURCE_UNSTABLE)) {
-		if (list_empty(&cs->wd_list))
+		if (!list_empty(&cs->list) && list_empty(&cs->wd_list))
 			list_add(&cs->wd_list, &watchdog_list);
 		__clocksource_unstable(cs);
 	}
@@ -319,9 +332,6 @@ static void clocksource_resume_watchdog(
 
 static void clocksource_enqueue_watchdog(struct clocksource *cs)
 {
-	unsigned long flags;
-
-	spin_lock_irqsave(&watchdog_lock, flags);
 	if (cs->flags & CLOCK_SOURCE_MUST_VERIFY) {
 		/* cs is a clocksource to be watched. */
 		list_add(&cs->wd_list, &watchdog_list);
@@ -331,7 +341,6 @@ static void clocksource_enqueue_watchdog
 		if (cs->flags & CLOCK_SOURCE_IS_CONTINUOUS)
 			cs->flags |= CLOCK_SOURCE_VALID_FOR_HRES;
 	}
-	spin_unlock_irqrestore(&watchdog_lock, flags);
 }
 
 static void clocksource_select_watchdog(bool fallback)
@@ -373,9 +382,6 @@ static void clocksource_select_watchdog(
 
 static void clocksource_dequeue_watchdog(struct clocksource *cs)
 {
-	unsigned long flags;
-
-	spin_lock_irqsave(&watchdog_lock, flags);
 	if (cs != watchdog) {
 		if (cs->flags & CLOCK_SOURCE_MUST_VERIFY) {
 			/* cs is a watched clocksource. */
@@ -384,21 +390,19 @@ static void clocksource_dequeue_watchdog
 			clocksource_stop_watchdog();
 		}
 	}
-	spin_unlock_irqrestore(&watchdog_lock, flags);
 }
 
 static int __clocksource_watchdog_kthread(void)
 {
 	struct clocksource *cs, *tmp;
 	unsigned long flags;
-	LIST_HEAD(unstable);
 	int select = 0;
 
 	spin_lock_irqsave(&watchdog_lock, flags);
 	list_for_each_entry_safe(cs, tmp, &watchdog_list, wd_list) {
 		if (cs->flags & CLOCK_SOURCE_UNSTABLE) {
 			list_del_init(&cs->wd_list);
-			list_add(&cs->wd_list, &unstable);
+			__clocksource_change_rating(cs, 0);
 			select = 1;
 		}
 		if (cs->flags & CLOCK_SOURCE_RESELECT) {
@@ -410,11 +414,6 @@ static int __clocksource_watchdog_kthrea
 	clocksource_stop_watchdog();
 	spin_unlock_irqrestore(&watchdog_lock, flags);
 
-	/* Needs to be done outside of watchdog lock */
-	list_for_each_entry_safe(cs, tmp, &unstable, wd_list) {
-		list_del_init(&cs->wd_list);
-		__clocksource_change_rating(cs, 0);
-	}
 	return select;
 }
 
@@ -447,6 +446,9 @@ static inline int __clocksource_watchdog
 static bool clocksource_is_watchdog(struct clocksource *cs) { return false; }
 void clocksource_mark_unstable(struct clocksource *cs) { }
 
+static void inline clocksource_watchdog_lock(unsigned long *flags) { }
+static void inline clocksource_watchdog_unlock(unsigned long *flags) { }
+
 #endif /* CONFIG_CLOCKSOURCE_WATCHDOG */
 
 /**
@@ -775,14 +777,19 @@ EXPORT_SYMBOL_GPL(__clocksource_update_f
  */
 int __clocksource_register_scale(struct clocksource *cs, u32 scale, u32 freq)
 {
+	unsigned long flags;
 
 	/* Initialize mult/shift and max_idle_ns */
 	__clocksource_update_freq_scale(cs, scale, freq);
 
 	/* Add clocksource to the clocksource list */
 	mutex_lock(&clocksource_mutex);
+
+	clocksource_watchdog_lock(&flags);
 	clocksource_enqueue(cs);
 	clocksource_enqueue_watchdog(cs);
+	clocksource_watchdog_unlock(&flags);
+
 	clocksource_select();
 	clocksource_select_watchdog(false);
 	mutex_unlock(&clocksource_mutex);
@@ -804,8 +811,13 @@ static void __clocksource_change_rating(
  */
 void clocksource_change_rating(struct clocksource *cs, int rating)
 {
+	unsigned long flags;
+
 	mutex_lock(&clocksource_mutex);
+	clocksource_watchdog_lock(&flags);
 	__clocksource_change_rating(cs, rating);
+	clocksource_watchdog_unlock(&flags);
+
 	clocksource_select();
 	clocksource_select_watchdog(false);
 	mutex_unlock(&clocksource_mutex);
@@ -817,6 +829,8 @@ EXPORT_SYMBOL(clocksource_change_rating)
  */
 static int clocksource_unbind(struct clocksource *cs)
 {
+	unsigned long flags;
+
 	if (clocksource_is_watchdog(cs)) {
 		/* Select and try to install a replacement watchdog. */
 		clocksource_select_watchdog(true);
@@ -830,8 +844,12 @@ static int clocksource_unbind(struct clo
 		if (curr_clocksource == cs)
 			return -EBUSY;
 	}
+
+	clocksource_watchdog_lock(&flags);
 	clocksource_dequeue_watchdog(cs);
 	list_del_init(&cs->list);
+	clocksource_watchdog_unlock(&flags);
+
 	return 0;
 }
 
author maintainer
#50 lore raw

PATCH 50/52 clocksource: Initialize cs->wd_list

In reply to Greg Kroah-Hartman

4.16-stable review patch. If anyone has any objections, please let me know.

------------------

From: Peter Zijlstra <[email protected]>

commit 5b9e886a4af97574ca3ce1147f35545da0e7afc7 upstream.

A number of places relies on list_empty(&cs->wd_list), however the list_head does not get initialized. Do so upon registration, such that thereafter it is possible to rely on list_empty() correctly reflecting the list membership status.

---
 kernel/time/clocksource.c |    2 ++
 1 file changed, 2 insertions(+)
kernel/time/clocksource.c +2 -0
@@ -332,6 +332,8 @@ static void clocksource_resume_watchdog(
 
 static void clocksource_enqueue_watchdog(struct clocksource *cs)
 {
+	INIT_LIST_HEAD(&cs->wd_list);
+
 	if (cs->flags & CLOCK_SOURCE_MUST_VERIFY) {
 		/* cs is a clocksource to be watched. */
 		list_add(&cs->wd_list, &watchdog_list);
author maintainer
#51 lore raw

PATCH 51/52 clocksource: Consistent de-rate when marking unstable

In reply to Greg Kroah-Hartman

4.16-stable review patch. If anyone has any objections, please let me know.

------------------

From: Peter Zijlstra <[email protected]>

commit cd2af07d823e5287cd6c91d54337348c2a873462 upstream.

When a registered clocksource gets marked unstable the watchdog_kthread will de-rate and re-select the clocksource. Ensure it also de-rates when getting called on an unregistered clocksource.

---
 kernel/time/clocksource.c |    9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)
kernel/time/clocksource.c +8 -1
@@ -152,12 +152,19 @@ static void __clocksource_unstable(struc
 	cs->flags &= ~(CLOCK_SOURCE_VALID_FOR_HRES | CLOCK_SOURCE_WATCHDOG);
 	cs->flags |= CLOCK_SOURCE_UNSTABLE;
 
-	if (list_empty(&cs->list))
+	/*
+	 * If the clocksource is registered clocksource_watchdog_kthread() will
+	 * re-rate and re-select.
+	 */
+	if (list_empty(&cs->list)) {
+		cs->rating = 0;
 		return;
+	}
 
 	if (cs->mark_unstable)
 		cs->mark_unstable(cs);
 
+	/* kick clocksource_watchdog_kthread() */
 	if (finished_booting)
 		schedule_work(&watchdog_work);
 }
author maintainer
#52 lore raw

PATCH 52/52 tracing: Fix bad use of igrab in trace_uprobe.c

In reply to Greg Kroah-Hartman

4.16-stable review patch. If anyone has any objections, please let me know.

------------------

From: Song Liu <[email protected]>

commit 0c92c7a3c5d416f47b32c5f20a611dfeca5d5f2e upstream.

As Miklos reported and suggested:

This pattern repeats two times in trace_uprobe.c and in kernel/events/core.c as well:

      ret = kern_path(filename, LOOKUP_FOLLOW, &path);
      if (ret)
          goto fail_address_parse;

      inode = igrab(d_inode(path.dentry));
      path_put(&path);

And it's wrong. You can only hold a reference to the inode if you have an active ref to the superblock as well (which is normally through path.mnt) or holding s_umount.

This way unmounting the containing filesystem while the tracepoint is active will give you the "VFS: Busy inodes after unmount..." message and a crash when the inode is finally put.

Solution: store path instead of inode.

This patch fixes two instances in trace_uprobe.c. struct path is added to struct trace_uprobe to keep the inode and containing mount point referenced.

Fixes f3f096cfedf8 ("tracing: Provide trace events interface for uprobes")
Fixes 33ea4b24277b ("perf/core: Implement the 'perf_uprobe' PMU")
Cc Ingo Molnar <[email protected]>
Cc Howard McLauchlan <[email protected]>
Cc Josef Bacik <[email protected]>
Cc Srikar Dronamraju <[email protected]>
---
 kernel/trace/trace_uprobe.c |   24 ++++++++++--------------
 1 file changed, 10 insertions(+), 14 deletions(-)
kernel/trace/trace_uprobe.c +10 -14
@@ -55,6 +55,7 @@ struct trace_uprobe {
 	struct list_head		list;
 	struct trace_uprobe_filter	filter;
 	struct uprobe_consumer		consumer;
+	struct path			path;
 	struct inode			*inode;
 	char				*filename;
 	unsigned long			offset;
@@ -287,7 +288,7 @@ static void free_trace_uprobe(struct tra
 	for (i = 0; i < tu->tp.nr_args; i++)
 		traceprobe_free_probe_arg(&tu->tp.args[i]);
 
-	iput(tu->inode);
+	path_put(&tu->path);
 	kfree(tu->tp.call.class->system);
 	kfree(tu->tp.call.name);
 	kfree(tu->filename);
@@ -361,7 +362,6 @@ end:
 static int create_trace_uprobe(int argc, char **argv)
 {
 	struct trace_uprobe *tu;
-	struct inode *inode;
 	char *arg, *event, *group, *filename;
 	char buf[MAX_EVENT_NAME_LEN];
 	struct path path;
@@ -369,7 +369,6 @@ static int create_trace_uprobe(int argc,
 	bool is_delete, is_return;
 	int i, ret;
 
-	inode = NULL;
 	ret = 0;
 	is_delete = false;
 	is_return = false;
@@ -435,21 +434,16 @@ static int create_trace_uprobe(int argc,
 	}
 	/* Find the last occurrence, in case the path contains ':' too. */
 	arg = strrchr(argv[1], ':');
-	if (!arg) {
-		ret = -EINVAL;
-		goto fail_address_parse;
-	}
+	if (!arg)
+		return -EINVAL;
 
 	*arg++ = '\0';
 	filename = argv[1];
 	ret = kern_path(filename, LOOKUP_FOLLOW, &path);
 	if (ret)
-		goto fail_address_parse;
-
-	inode = igrab(d_inode(path.dentry));
-	path_put(&path);
+		return ret;
 
-	if (!inode || !S_ISREG(inode->i_mode)) {
+	if (!d_is_reg(path.dentry)) {
 		ret = -EINVAL;
 		goto fail_address_parse;
 	}
@@ -488,7 +482,7 @@ static int create_trace_uprobe(int argc,
 		goto fail_address_parse;
 	}
 	tu->offset = offset;
-	tu->inode = inode;
+	tu->path = path;
 	tu->filename = kstrdup(filename, GFP_KERNEL);
 
 	if (!tu->filename) {
@@ -556,7 +550,7 @@ error:
 	return ret;
 
 fail_address_parse:
-	iput(inode);
+	path_put(&path);
 
 	pr_info("Failed to parse address or file.\n");
 
@@ -935,6 +929,7 @@ probe_event_enable(struct trace_uprobe *
 		goto err_flags;
 
 	tu->consumer.filter = filter;
+	tu->inode = d_real_inode(tu->path.dentry);
 	ret = uprobe_register(tu->inode, tu->offset, &tu->consumer);
 	if (ret)
 		goto err_buffer;
@@ -980,6 +975,7 @@ probe_event_disable(struct trace_uprobe
 	WARN_ON(!uprobe_filter_is_empty(&tu->filter));
 
 	uprobe_unregister(tu->inode, tu->offset, &tu->consumer);
+	tu->inode = NULL;
 	tu->tp.flags &= file ? ~TP_FLAG_TRACE : ~TP_FLAG_PROFILE;
 
 	uprobe_buffer_disable();
#53 lore raw
In reply to Greg Kroah-Hartman
stable-rc/linux-4.16.y boot: 111 boots: 4 failed, 102 passed with 5 offline (v4.16.7-53-g113b01a62036)

stable-rc/linux-4.16.y boot: 111 boots: 4 failed, 102 passed with 5 offline (v4.16.7-53-g113b01a62036)

Full Boot Summary: https://kernelci.org/boot/all/job/stable-rc/branch/linux-4.16.y/kernel/v4.16.7-53-g113b01a62036/
Full Build Summary: https://kernelci.org/build/stable-rc/branch/linux-4.16.y/kernel/v4.16.7-53-g113b01a62036/

Tree: stable-rc
Branch: linux-4.16.y
Git Describe: v4.16.7-53-g113b01a62036
Git Commit: 113b01a62036d61f7ca3d8e6cff988df81700126
Git URL: http://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
Tested: 56 unique boards, 23 SoC families, 15 builds out of 186

Boot Regressions Detected:

arm:

    multi_v7_defconfig:
        am335x-boneblack:
            lab-collabora: failing since 3 days (last pass: v4.16.7-330-g42715b2b2887 - first fail: v4.16.7-2-g3afbe8ca7a94)
            lab-baylibre-seattle: new failure (last pass: v4.16.7-2-g3afbe8ca7a94)

arm64:

    defconfig:
        apq8016-sbc:
            lab-mhart: new failure (last pass: v4.16.7-2-g3afbe8ca7a94)

x86:

    i386_defconfig:
        x86-celeron:
            lab-mhart: new failure (last pass: v4.16.7-2-g3afbe8ca7a94)

Boot Failures Detected:

arm64:

    defconfig
        apq8016-sbc: 1 failed lab

arm:

multi_v7_defconfig
am335x-boneblack: 2 failed labs

x86:

i386_defconfig
x86-celeron: 1 failed lab

Offline Platforms:

arm:

    multi_v7_defconfig:
        qcom-apq8064-cm-qs600: 1 offline lab
        qcom-apq8064-ifc6410: 1 offline lab

    qcom_defconfig:
        qcom-apq8064-cm-qs600: 1 offline lab
        qcom-apq8064-ifc6410: 1 offline lab

arm64:

    defconfig:
        apq8016-sbc: 1 offline lab

---
For more info write to <[email protected]>

#54 lore raw
In reply to Greg Kroah-Hartman
Quoted 8 lines · Greg Kroah-Hartman

This is the start of the stable review cycle for the 4.16.8 release. There are 52 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Responses should be made by Thu May 10 07:38:51 UTC 2018. Anything received after that time might be too late.

Build results:

	total: 143 pass: 143 fail: 0
Qemu test results:
	total: 139 pass: 139 fail: 0

Details are available at http://kerneltests.org/builders/.

Guenter

author maintainer
#55 lore raw
Quoted 10 lines · Guenter Roeck
Quoted 8 lines · Greg Kroah-Hartman

This is the start of the stable review cycle for the 4.16.8 release. There are 52 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Responses should be made by Thu May 10 07:38:51 UTC 2018. Anything received after that time might be too late.

Quoted 6 lines

Build results:

	total: 143 pass: 143 fail: 0
Qemu test results:
	total: 139 pass: 139 fail: 0

Details are available at http://kerneltests.org/builders/.

Ah, it's nice that everything is all working better now. Thanks for testing all of these and letting me know.

greg k-h

#56 lore raw
In reply to Greg Kroah-Hartman
Quoted 9 lines · Greg Kroah-Hartman

This is the start of the stable review cycle for the 4.16.8 release. There are 52 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Responses should be made by Thu May 10 07:38:51 UTC 2018. Anything received after that time might be too late.

The whole patch series can be found in one patch at:

Quoted 8 lines
        https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.16.8-rc1.gz

or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.16.y
and the diffstat can be found below.

thanks,

greg k-h

Results from Linaro’s test farm.
No regressions on arm64, arm and x86_64.

Summary
------------------------------------------------------------------------

kernel: 4.16.8-rc1
git repo: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
git branch: linux-4.16.y
git commit: 113b01a62036d61f7ca3d8e6cff988df81700126
git describe: v4.16.7-53-g113b01a62036
Test details: https://qa-reports.linaro.org/lkft/linux-stable-rc-4.16-oe/build/v4.16.7-53-g113b01a62036

No regressions (compared to build v4.16.7-2-g3afbe8ca7a94)

Boards, architectures and test suites:
-------------------------------------

dragonboard-410c - arm64
* boot - fail: 6, pass: 19
* kselftest - skip: 26, fail: 1, pass: 41
* libhugetlbfs - skip: 1, fail: 1, pass: 89
* ltp-containers-tests - skip: 17, pass: 64
* ltp-fcntl-locktests-tests - pass: 2
* ltp-filecaps-tests - pass: 2
* ltp-fs-tests - skip: 6, pass: 57
* ltp-fs_bind-tests - pass: 2
* ltp-fs_perms_simple-tests - pass: 19
* ltp-fsx-tests - pass: 2
* ltp-hugetlb-tests - skip: 1, pass: 21
* ltp-io-tests - pass: 3
* ltp-ipc-tests - pass: 9
* ltp-math-tests - pass: 22
* ltp-nptl-tests - pass: 2
* ltp-sched-tests - pass: 14
* ltp-securebits-tests - pass: 4
* ltp-syscalls-tests - skip: 133, pass: 1017
* ltp-timers-tests - pass: 13

hi6220-hikey - arm64
* boot - pass: 20
* kselftest - skip: 22, pass: 45
* libhugetlbfs - skip: 1, pass: 90
* ltp-cap_bounds-tests - pass: 2
* ltp-containers-tests - skip: 17, pass: 64
* ltp-fcntl-locktests-tests - pass: 2
* ltp-filecaps-tests - pass: 2
* ltp-fs-tests - skip: 6, pass: 57
* ltp-fs_bind-tests - pass: 2
* ltp-fs_perms_simple-tests - pass: 19
* ltp-fsx-tests - pass: 2
* ltp-hugetlb-tests - skip: 1, pass: 21
* ltp-io-tests - pass: 3
* ltp-ipc-tests - pass: 9
* ltp-math-tests - pass: 11
* ltp-nptl-tests - pass: 2
* ltp-pty-tests - pass: 4
* ltp-sched-tests - skip: 4, pass: 10
* ltp-securebits-tests - pass: 4
* ltp-syscalls-tests - skip: 134, pass: 1016
* ltp-timers-tests - pass: 13

juno-r2 - arm64
* boot - pass: 20
* kselftest - skip: 24, pass: 44
* libhugetlbfs - skip: 1, pass: 90
* ltp-cap_bounds-tests - pass: 2
* ltp-containers-tests - skip: 17, pass: 64
* ltp-fcntl-locktests-tests - pass: 2
* ltp-filecaps-tests - pass: 2
* ltp-fs-tests - skip: 6, pass: 57
* ltp-fs_bind-tests - pass: 2
* ltp-fs_perms_simple-tests - pass: 19
* ltp-fsx-tests - pass: 2
* ltp-hugetlb-tests - pass: 22
* ltp-io-tests - pass: 3
* ltp-ipc-tests - pass: 9
* ltp-math-tests - pass: 11
* ltp-nptl-tests - pass: 2
* ltp-pty-tests - pass: 4
* ltp-sched-tests - skip: 4, pass: 10
* ltp-securebits-tests - pass: 4
* ltp-syscalls-tests - skip: 133, pass: 1017
* ltp-timers-tests - pass: 13

qemu_arm
* boot - fail: 8, pass: 12
* kselftest - skip: 31, pass: 37
* libhugetlbfs - pass: 1
* ltp-cap_bounds-tests - pass: 2
* ltp-containers-tests - skip: 18, pass: 63
* ltp-fcntl-locktests-tests - pass: 2
* ltp-filecaps-tests - pass: 2
* ltp-fsx-tests - pass: 2
* ltp-hugetlb-tests - skip: 1, pass: 21
* ltp-ipc-tests - pass: 9
* ltp-pty-tests - pass: 4
* ltp-sched-tests - skip: 7, pass: 7
* ltp-securebits-tests - pass: 4

qemu_arm64
* boot - fail: 3, pass: 17
* libhugetlbfs - skip: 1, pass: 90
* ltp-cap_bounds-tests - pass: 2
* ltp-containers-tests - skip: 17, pass: 64
* ltp-fcntl-locktests-tests - pass: 2
* ltp-filecaps-tests - pass: 2
* ltp-fs-tests - skip: 6, pass: 57
* ltp-fs_bind-tests - pass: 2
* ltp-fsx-tests - pass: 2
* ltp-hugetlb-tests - pass: 22
* ltp-io-tests - pass: 3
* ltp-ipc-tests - pass: 9
* ltp-nptl-tests - pass: 2
* ltp-pty-tests - pass: 4
* ltp-securebits-tests - pass: 4
* ltp-syscalls-tests - skip: 155, fail: 2, pass: 993
* ltp-timers-tests - pass: 13

qemu_x86_64
* boot - pass: 22
* kselftest - skip: 30, pass: 50
* kselftest-vsyscall-mode-native - skip: 30, pass: 50
* kselftest-vsyscall-mode-none - skip: 30, pass: 50
* libhugetlbfs - skip: 1, pass: 90
* ltp-cap_bounds-tests - pass: 2
* ltp-containers-tests - skip: 17, pass: 64
* ltp-fcntl-locktests-tests - pass: 2
* ltp-filecaps-tests - pass: 2
* ltp-fs-tests - skip: 6, pass: 57
* ltp-fs_bind-tests - pass: 2
* ltp-fs_perms_simple-tests - pass: 19
* ltp-fsx-tests - pass: 2
* ltp-hugetlb-tests - pass: 22
* ltp-io-tests - pass: 3
* ltp-ipc-tests - pass: 9
* ltp-math-tests - pass: 11
* ltp-nptl-tests - pass: 2
* ltp-pty-tests - pass: 4
* ltp-sched-tests - skip: 1, pass: 13
* ltp-securebits-tests - pass: 4
* ltp-syscalls-tests - skip: 152, pass: 998
* ltp-timers-tests - pass: 13

x15 - arm
* boot - pass: 20
* kselftest - skip: 28, pass: 37
* libhugetlbfs - skip: 1, pass: 87
* ltp-cap_bounds-tests - pass: 2
* ltp-containers-tests - skip: 18, pass: 63
* ltp-fcntl-locktests-tests - pass: 2
* ltp-filecaps-tests - pass: 2
* ltp-fs-tests - skip: 5, pass: 58
* ltp-fs_bind-tests - pass: 2
* ltp-fs_perms_simple-tests - pass: 19
* ltp-fsx-tests - pass: 2
* ltp-hugetlb-tests - skip: 2, pass: 20
* ltp-io-tests - pass: 3
* ltp-ipc-tests - pass: 9
* ltp-math-tests - pass: 11
* ltp-nptl-tests - pass: 2
* ltp-pty-tests - pass: 4
* ltp-sched-tests - skip: 1, pass: 13
* ltp-securebits-tests - pass: 4
* ltp-syscalls-tests - skip: 75, pass: 1075
* ltp-timers-tests - pass: 13

x86_64
* boot - pass: 23
* kselftest - skip: 32, pass: 56
* kselftest-vsyscall-mode-native - skip: 20, pass: 55
* kselftest-vsyscall-mode-none - skip: 24, pass: 55
* libhugetlbfs - skip: 1, pass: 90
* ltp-cap_bounds-tests - pass: 2
* ltp-containers-tests - skip: 17, pass: 63
* ltp-fcntl-locktests-tests - pass: 2
* ltp-filecaps-tests - pass: 2
* ltp-fs-tests - skip: 5, pass: 58
* ltp-fs_bind-tests - pass: 2
* ltp-fs_perms_simple-tests - pass: 19
* ltp-fsx-tests - pass: 2
* ltp-hugetlb-tests - pass: 22
* ltp-io-tests - pass: 3
* ltp-ipc-tests - pass: 9
* ltp-math-tests - pass: 11
* ltp-nptl-tests - pass: 2
* ltp-pty-tests - pass: 3
* ltp-sched-tests - skip: 5, pass: 9
* ltp-securebits-tests - pass: 4
* ltp-syscalls-tests - skip: 116, pass: 1034
* ltp-timers-tests - pass: 13

Signature · 2 lines
Linaro QA (BETA)
https://qa-reports.linaro.org
author maintainer
#57 lore raw
Quoted 15 lines · Naresh Kamboju
Quoted 14 lines · Greg Kroah-Hartman

This is the start of the stable review cycle for the 4.16.8 release. There are 52 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Responses should be made by Thu May 10 07:38:51 UTC 2018. Anything received after that time might be too late.

The whole patch series can be found in one patch at:

        https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.16.8-rc1.gz

or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.16.y
and the diffstat can be found below.

Quoted 6 lines
Quoted 3 lines

thanks,

greg k-h

Results from Linaro’s test farm.
No regressions on arm64, arm and x86_64.

Thanks for testing all three of these and letting me know.

greg k-h

#58 lore raw
In reply to Greg Kroah-Hartman
Quoted 9 lines · Greg Kroah-Hartman

This is the start of the stable review cycle for the 4.16.8 release. There are 52 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Responses should be made by Thu May 10 07:38:51 UTC 2018. Anything received after that time might be too late.

The whole patch series can be found in one patch at:

Quoted 9 lines
	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.16.8-rc1.gz

or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.16.y
and the diffstat can be found below.

thanks,

greg k-h

Compiled and booted on my test system. No dmesg regressions.

thanks,
-- Shuah

author maintainer
#59 lore raw
Quoted 15 lines · Shuah Khan
Quoted 14 lines · Greg Kroah-Hartman

This is the start of the stable review cycle for the 4.16.8 release. There are 52 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Responses should be made by Thu May 10 07:38:51 UTC 2018. Anything received after that time might be too late.

The whole patch series can be found in one patch at:

	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.16.8-rc1.gz

or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.16.y
and the diffstat can be found below.

Quoted 6 lines
Quoted 4 lines

thanks,

greg k-h

Compiled and booted on my test system. No dmesg regressions.

Great, thanks for testing all of these and letting me know.

greg k-h