libkrb5: disable rpath
PATCH 1/1 libkrb5: disable rpath
The default rpath value for krb5 is /usr/lib. On some hosts this might confuse the build time linker as it looks for target libraries in the host /usr/lib directory.
Should fix:
http://autobuild.buildroot.net/results/6df/6df84ed325ddd92248741d2f4737423b1b999489/
http://autobuild.buildroot.net/results/049/049f5147288b418402b6e5a4181eff4d426c8d7a/
http://autobuild.buildroot.net/results/432/432d5d0295f77cd34b78e70e8b4b7d77ef19ae3c/
--- package/libkrb5/libkrb5.mk | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
package/libkrb5/libkrb5.mk +2 -1
@@ -28,7 +28,8 @@ LIBKRB5_CONF_OPTS = \ --without-system-et \ --without-system-ss \ --without-system-verto \ - --without-tcl + --without-tcl \ + --disable-rpath ifeq ($(BR2_PACKAGE_OPENLDAP),y) LIBKRB5_CONF_OPTS += --with-ldap
Signature · 1 line
2.17.0
PATCH 1/1 libkrb5: disable rpath
Am 13.05.2018 um 20:37 schrieb Baruch Siach:
Quoted 20 lines
The default rpath value for krb5 is
/usr/lib. On some hosts this might confuse the build time linker as it looks for target libraries in the host/usr/libdirectory.Should fix:
http://autobuild.buildroot.net/results/6df/6df84ed325ddd92248741d2f4737423b1b999489/
http://autobuild.buildroot.net/results/049/049f5147288b418402b6e5a4181eff4d426c8d7a/
http://autobuild.buildroot.net/results/432/432d5d0295f77cd34b78e70e8b4b7d77ef19ae3c/Signed-off-by Baruch Siach <[email protected]>--- package/libkrb5/libkrb5.mk | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)package/libkrb5/libkrb5.mk +0
-0
package/libkrb5/libkrb5.mk LIBKRB5_CONF_OPTS = \ · line 35
Quoted 9 lines
package/libkrb5/libkrb5.mk +2
-1@@ -28,7 +28,8 @@ LIBKRB5_CONF_OPTS = \ --without-system-et \ --without-system-ss \ --without-system-verto \ - --without-tcl + --without-tcl \ + --disable-rpath ifeq ($(BR2_PACKAGE_OPENLDAP),y) LIBKRB5_CONF_OPTS += --with-ldap
Thank you!
Sorry for not catching those myself, I just had no clue what was going on here and with the other failures.
PATCH 1/1 libkrb5: disable rpath
Andr?, All,
On 2018-05-13 20:59 +0200, Andr? Hentschel spake thusly:
Quoted 27 lines
Am 13.05.2018 um 20:37 schrieb Baruch Siach:
Quoted 26 lines
The default rpath value for krb5 is
/usr/lib. On some hosts this might confuse the build time linker as it looks for target libraries in the host/usr/libdirectory.Should fix:
http://autobuild.buildroot.net/results/6df/6df84ed325ddd92248741d2f4737423b1b999489/
http://autobuild.buildroot.net/results/049/049f5147288b418402b6e5a4181eff4d426c8d7a/
http://autobuild.buildroot.net/results/432/432d5d0295f77cd34b78e70e8b4b7d77ef19ae3c/Signed-off-by Baruch Siach <[email protected]>--- package/libkrb5/libkrb5.mk | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)package/libkrb5/libkrb5.mk +2
-1@@ -28,7 +28,8 @@ LIBKRB5_CONF_OPTS = \ --without-system-et \ --without-system-ss \ --without-system-verto \ - --without-tcl + --without-tcl \ + --disable-rpath
Quoted 8 lines
package/libkrb5/libkrb5.mk LIBKRB5_CONF_OPTS = \ · line 35
Quoted 3 lines
package/libkrb5/libkrb5.mk +0
-0ifeq ($(BR2_PACKAGE_OPENLDAP),y) LIBKRB5_CONF_OPTS += --with-ldapThank you!
Sorry for not catching those myself, I just had no clue what was going on here and with the other failures.Signed-off-by Andr? Hentschel <[email protected]>
"Signed-off-by" is when you are part of the submission chain, i.e. you participated in the chain that goes from the author down to the one that sends it on the mailing list.
If you agree with a patch, you can provide:
Reviewed-by: you looked at the patch, it looks OK for you, but you
can't guarantee there so side effect;
Acked-by: same as Reviewed-by, but you would commit it if you had
commit rights;
Regards,
Yann E. MORIN.
Quoted 3 lines
buildroot mailing list
buildroot at busybox.net
http://lists.busybox.net/mailman/listinfo/buildroot
Signature · 6 lines
.-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 223 225 172 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------'
PATCH 1/1 libkrb5: disable rpath
In reply to Baruch SiachBaruch,
Added Matthew in Cc, as the failures only occur on hios autobuilder, as I could see...
Matthew, not sure you saw my request on IRC: were you able to test the same fix I shared on IRC?
On 2018-05-13 21:37 +0300, Baruch Siach spake thusly:
Quoted 10 lines
The default rpath value for krb5 is
/usr/lib. On some hosts this might confuse the build time linker as it looks for target libraries in the host/usr/libdirectory.Should fix:
http://autobuild.buildroot.net/results/6df/6df84ed325ddd92248741d2f4737423b1b999489/
http://autobuild.buildroot.net/results/049/049f5147288b418402b6e5a4181eff4d426c8d7a/
http://autobuild.buildroot.net/results/432/432d5d0295f77cd34b78e70e8b4b7d77ef19ae3c/Signed-off-by Baruch Siach <[email protected]>
Regards,
Yann E. MORIN.
Quoted 25 lines
--- package/libkrb5/libkrb5.mk | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)package/libkrb5/libkrb5.mk +2
-1@@ -28,7 +28,8 @@ LIBKRB5_CONF_OPTS = \ --without-system-et \ --without-system-ss \ --without-system-verto \ - --without-tcl + --without-tcl \ + --disable-rpath ifeq ($(BR2_PACKAGE_OPENLDAP),y) LIBKRB5_CONF_OPTS += --with-ldapSignature · 6 lines
2.17.0 _______________________________________________ buildroot mailing list buildroot at busybox.net http://lists.busybox.net/mailman/listinfo/buildroot
Signature · 6 lines
.-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 223 225 172 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------'
Thomas Petazzoni
AppliedPATCH 1/1 libkrb5: disable rpath
In reply to Baruch SiachHello,
Quoted 9 lines · Baruch Siach
The default rpath value for krb5 is
/usr/lib. On some hosts this might confuse the build time linker as it looks for target libraries in the host/usr/libdirectory.Should fix:
http://autobuild.buildroot.net/results/6df/6df84ed325ddd92248741d2f4737423b1b999489/
http://autobuild.buildroot.net/results/049/049f5147288b418402b6e5a4181eff4d426c8d7a/
http://autobuild.buildroot.net/results/432/432d5d0295f77cd34b78e70e8b4b7d77ef19ae3c/
Quoted 4 lines
Signed-off-by Baruch Siach <[email protected]>--- package/libkrb5/libkrb5.mk | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
Applied to master, thanks.
Thomas
Signature · 3 lines
Thomas Petazzoni, CTO, Bootlin (formerly Free Electrons) Embedded Linux and Kernel engineering https://bootlin.com