Skip to contentSkip to conversation

clamav: reformat patches as Git-formatted patches

PATCH New Thomas Petazzoni 2 participants 5 messages May 7, 2018 – May 13, 2018

lore
Share & tools
lore

Thomas Petazzoni

author
#0 lore raw

PATCH 1/2 clamav: reformat patches as Git-formatted patches

ClamAV is using Git upstream
(https://github.com/Cisco-Talos/clamav-devel), so it makes sense to use Git-formatted patches.

Signed-off-by Thomas Petazzoni <[email protected]>
---
 ...roto.c-fix-build-error-due-to-missing-soc.patch | 34 ++++++++++++++++++++++
 package/clamav/0001-clamdscan.patch                | 21 -------------
 ...use-backtrace-if-using-uClibc-without-ba.patch} | 22 ++++++++++----
 3 files changed, 51 insertions(+), 26 deletions(-)
 create mode 100644 package/clamav/0001-clamdscan-proto.c-fix-build-error-due-to-missing-soc.patch
 delete mode 100644 package/clamav/0001-clamdscan.patch
 rename package/clamav/{0002-backtrace-uClibc.patch => 0002-mbox-do-not-use-backtrace-if-using-uClibc-without-ba.patch} (53%)
package/clamav/0001-clamdscan-proto.c-fix-build-error-due-to-missing-soc.patch new file +34 -0
new file mode 100644
index 0000000000..daac677eaa
@@ -0,0 +1,34 @@
+From 52fda6e6689e22866a39ec4273713fb6035c38b2 Mon Sep 17 00:00:00 2001
+From: Bernd Kuhls <[email protected]>
+Date: Mon, 7 May 2018 23:14:46 +0200
+Subject: [PATCH] clamdscan/proto.c: fix build error due to missing sockaddr_un
+ definition
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+proto.c: In function ?dconnect?:
+proto.c:86:67: error: invalid application of ?sizeof? to incomplete type ?struct sockaddr_un?
+             if (connect(sockd, (struct sockaddr *)&nixsock, sizeof(nixsock)) == 0)
+
+Signed-off-by: Bernd Kuhls <[email protected]>
+Upstream-status: http://lurker.clamav.net/message/20140928.130829.5494fd68.en.html
+---
+ clamdscan/proto.c | 1 +
+ 1 file changed, 1 insertion(+)
+
+diff --git a/clamdscan/proto.c b/clamdscan/proto.c
+index 0205f6da0..d3396732f 100644
+--- a/clamdscan/proto.c
++++ b/clamdscan/proto.c
+@@ -42,6 +42,7 @@
+ #include <sys/stat.h>
+ #include <fcntl.h>
+ #include <sys/types.h>
++#include <sys/un.h>
+ #ifdef HAVE_SYS_SELECT_H
+ #include <sys/select.h>
+ #endif
+-- 
+2.14.3
+
package/clamav/0001-clamdscan.patch deleted +0 -21
deleted file mode 100644
index c395ae1600..0000000000
@@ -1,21 +0,0 @@
-Fixes build error
-
-proto.c: In function ?dconnect?:
-proto.c:86:67: error: invalid application of ?sizeof? to incomplete type ?struct sockaddr_un?
-             if (connect(sockd, (struct sockaddr *)&nixsock, sizeof(nixsock)) == 0)
-
-Patch sent upstream: http://lurker.clamav.net/message/20140928.130829.5494fd68.en.html
-
-Signed-off-by: Bernd Kuhls <[email protected]>
-
-diff -uNr clamav-0.98.3.org/clamdscan/proto.c clamav-0.98.3/clamdscan/proto.c
---- clamav-0.98.3.org/clamdscan/proto.c	2014-05-06 20:39:56.000000000 +0200
-+++ clamav-0.98.3/clamdscan/proto.c	2014-05-10 10:41:44.000000000 +0200
-@@ -35,6 +35,7 @@
- #include <sys/stat.h>
- #include <fcntl.h>
- #include <sys/types.h>
-+#include <sys/un.h>
- #ifdef HAVE_SYS_SELECT_H
- #include <sys/select.h>
- #endif
package/clamav/0002-mbox-do-not-use-backtrace-if-using-uClibc-without-ba.patch renamed from package/clamav/0002-backtrace-uClibc.patch +17 -5
similarity index 53%
rename from package/clamav/0002-backtrace-uClibc.patch
rename to package/clamav/0002-mbox-do-not-use-backtrace-if-using-uClibc-without-ba.patch
index 82ad67307d..e99a9742ec 100644
@@ -1,4 +1,8 @@
-mbox: do not use backtrace if using uClibc without backtrace support
+From 053bac34b9f0f947c58fcdf80ac03d5a6b05aa12 Mon Sep 17 00:00:00 2001
+From: "Yann E. MORIN" <[email protected]>
+Date: Mon, 7 May 2018 23:15:58 +0200
+Subject: [PATCH] mbox: do not use backtrace if using uClibc without backtrace
+ support
 
 Since uClibc can be configured without support for backtrace, disable
 the backtrace if we are building with a uClibc that was built without

@@ -8,10 +12,15 @@ This is a bit hacky, and would greatly benefit from a test in ./configure
 instead, but does nicely as a quick fix for now.
 
 Signed-off-by: "Yann E. MORIN" <[email protected]>
-diff -durN clamav-0.98.4.orig/libclamav/mbox.c clamav-0.98.4/libclamav/mbox.c
---- clamav-0.98.4.orig/libclamav/mbox.c	2014-05-21 17:25:05.000000000 +0200
-+++ clamav-0.98.4/libclamav/mbox.c	2014-11-16 17:21:04.885383286 +0100
-@@ -83,7 +83,7 @@
+---
+ libclamav/mbox.c | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+diff --git a/libclamav/mbox.c b/libclamav/mbox.c
+index 71f540c0a..4851297a9 100644
+--- a/libclamav/mbox.c
++++ b/libclamav/mbox.c
+@@ -98,7 +98,7 @@
  #include <features.h>
  #endif
  

@@ -20,3 +29,6 @@ diff -durN clamav-0.98.4.orig/libclamav/mbox.c clamav-0.98.4/libclamav/mbox.c
  #define HAVE_BACKTRACE
  #endif
  #endif
+-- 
+2.14.3
+
Signature · 1 line
2.14.3
author
#1 lore raw

PATCH 1/2 clamav: reformat patches as Git-formatted patches

Hello,

Quoted 5 lines · Thomas Petazzoni

ClamAV is using Git upstream
(https://github.com/Cisco-Talos/clamav-devel), so it makes sense to use Git-formatted patches.

Signed-off-by Thomas Petazzoni <[email protected]>
Quoted 8 lines
---
 ...roto.c-fix-build-error-due-to-missing-soc.patch | 34 ++++++++++++++++++++++
 package/clamav/0001-clamdscan.patch                | 21 -------------
 ...use-backtrace-if-using-uClibc-without-ba.patch} | 22 ++++++++++----
 3 files changed, 51 insertions(+), 26 deletions(-)
 create mode 100644 package/clamav/0001-clamdscan-proto.c-fix-build-error-due-to-missing-soc.patch
 delete mode 100644 package/clamav/0001-clamdscan.patch
 rename package/clamav/{0002-backtrace-uClibc.patch => 0002-mbox-do-not-use-backtrace-if-using-uClibc-without-ba.patch} (53%)

Thanks to Yann's review, both patches have been applied to master.

Thomas

Signature · 3 lines
Thomas Petazzoni, CTO, Bootlin (formerly Free Electrons)
Embedded Linux and Kernel engineering
https://bootlin.com
#2 lore raw

PATCH 1/2 clamav: reformat patches as Git-formatted patches

In reply to Thomas Petazzoni

Thomas, All,

On 2018-05-07 23:20 +0200, Thomas Petazzoni spake thusly:

Quoted 5 lines

ClamAV is using Git upstream
(https://github.com/Cisco-Talos/clamav-devel), so it makes sense to use Git-formatted patches.

Signed-off-by Thomas Petazzoni <[email protected]>
Reviewed-by "Yann E. MORIN" <[email protected]>

Regards,
Yann E. MORIN.

Quoted 127 lines
---
 ...roto.c-fix-build-error-due-to-missing-soc.patch | 34 ++++++++++++++++++++++
 package/clamav/0001-clamdscan.patch                | 21 -------------
 ...use-backtrace-if-using-uClibc-without-ba.patch} | 22 ++++++++++----
 3 files changed, 51 insertions(+), 26 deletions(-)
 create mode 100644 package/clamav/0001-clamdscan-proto.c-fix-build-error-due-to-missing-soc.patch
 delete mode 100644 package/clamav/0001-clamdscan.patch
 rename package/clamav/{0002-backtrace-uClibc.patch => 0002-mbox-do-not-use-backtrace-if-using-uClibc-without-ba.patch} (53%)
package/clamav/0001-clamdscan-proto.c-fix-build-error-due-to-missing-soc.patch new file +34 -0
new file mode 100644
index 0000000000..daac677eaa
@@ -0,0 +1,34 @@
+From 52fda6e6689e22866a39ec4273713fb6035c38b2 Mon Sep 17 00:00:00 2001
+From: Bernd Kuhls <[email protected]>
+Date: Mon, 7 May 2018 23:14:46 +0200
+Subject: [PATCH] clamdscan/proto.c: fix build error due to missing sockaddr_un
+ definition
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+proto.c: In function ?dconnect?:
+proto.c:86:67: error: invalid application of ?sizeof? to incomplete type ?struct sockaddr_un?
+             if (connect(sockd, (struct sockaddr *)&nixsock, sizeof(nixsock)) == 0)
+
+Signed-off-by: Bernd Kuhls <[email protected]>
+Upstream-status: http://lurker.clamav.net/message/20140928.130829.5494fd68.en.html
+---
+ clamdscan/proto.c | 1 +
+ 1 file changed, 1 insertion(+)
+
+diff --git a/clamdscan/proto.c b/clamdscan/proto.c
+index 0205f6da0..d3396732f 100644
+--- a/clamdscan/proto.c
++++ b/clamdscan/proto.c
+@@ -42,6 +42,7 @@
+ #include <sys/stat.h>
+ #include <fcntl.h>
+ #include <sys/types.h>
++#include <sys/un.h>
+ #ifdef HAVE_SYS_SELECT_H
+ #include <sys/select.h>
+ #endif
+-- 
+2.14.3
+
package/clamav/0001-clamdscan.patch deleted +0 -21
deleted file mode 100644
index c395ae1600..0000000000
@@ -1,21 +0,0 @@
-Fixes build error
-
-proto.c: In function ?dconnect?:
-proto.c:86:67: error: invalid application of ?sizeof? to incomplete type ?struct sockaddr_un?
-             if (connect(sockd, (struct sockaddr *)&nixsock, sizeof(nixsock)) == 0)
-
-Patch sent upstream: http://lurker.clamav.net/message/20140928.130829.5494fd68.en.html
-
-Signed-off-by: Bernd Kuhls <[email protected]>
-
-diff -uNr clamav-0.98.3.org/clamdscan/proto.c clamav-0.98.3/clamdscan/proto.c
---- clamav-0.98.3.org/clamdscan/proto.c	2014-05-06 20:39:56.000000000 +0200
-+++ clamav-0.98.3/clamdscan/proto.c	2014-05-10 10:41:44.000000000 +0200
-@@ -35,6 +35,7 @@
- #include <sys/stat.h>
- #include <fcntl.h>
- #include <sys/types.h>
-+#include <sys/un.h>
- #ifdef HAVE_SYS_SELECT_H
- #include <sys/select.h>
- #endif
package/clamav/0002-mbox-do-not-use-backtrace-if-using-uClibc-without-ba.patch renamed from package/clamav/0002-backtrace-uClibc.patch +17 -5
similarity index 53%
rename from package/clamav/0002-backtrace-uClibc.patch
rename to package/clamav/0002-mbox-do-not-use-backtrace-if-using-uClibc-without-ba.patch
index 82ad67307d..e99a9742ec 100644
@@ -1,4 +1,8 @@
-mbox: do not use backtrace if using uClibc without backtrace support
+From 053bac34b9f0f947c58fcdf80ac03d5a6b05aa12 Mon Sep 17 00:00:00 2001
+From: "Yann E. MORIN" <[email protected]>
+Date: Mon, 7 May 2018 23:15:58 +0200
+Subject: [PATCH] mbox: do not use backtrace if using uClibc without backtrace
+ support
 
 Since uClibc can be configured without support for backtrace, disable
 the backtrace if we are building with a uClibc that was built without

@@ -8,10 +12,15 @@ This is a bit hacky, and would greatly benefit from a test in ./configure
 instead, but does nicely as a quick fix for now.
 
 Signed-off-by: "Yann E. MORIN" <[email protected]>
-diff -durN clamav-0.98.4.orig/libclamav/mbox.c clamav-0.98.4/libclamav/mbox.c
---- clamav-0.98.4.orig/libclamav/mbox.c	2014-05-21 17:25:05.000000000 +0200
-+++ clamav-0.98.4/libclamav/mbox.c	2014-11-16 17:21:04.885383286 +0100
-@@ -83,7 +83,7 @@
+---
+ libclamav/mbox.c | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+diff --git a/libclamav/mbox.c b/libclamav/mbox.c
+index 71f540c0a..4851297a9 100644
+--- a/libclamav/mbox.c
++++ b/libclamav/mbox.c
+@@ -98,7 +98,7 @@
  #include <features.h>
  #endif
 

@@ -20,3 +29,6 @@ diff -durN clamav-0.98.4.orig/libclamav/mbox.c clamav-0.98.4/libclamav/mbox.c
  #define HAVE_BACKTRACE
  #endif
  #endif
+-- 
+2.14.3
+
Signature · 6 lines
2.14.3

_______________________________________________
buildroot mailing list
buildroot at busybox.net
http://lists.busybox.net/mailman/listinfo/buildroot
Signature · 6 lines
.-----------------.--------------------.------------------.--------------------.
|  Yann E. MORIN  | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: |
| +33 662 376 056 | Software  Designer | \ / CAMPAIGN     |  ___               |
| +33 223 225 172 `------------.-------:  X  AGAINST      |  \e/  There is no  |
| http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL    |   v   conspiracy.  |
'------------------------------^-------^------------------^--------------------'
author
#3 lore raw

PATCH 2/2 clamav: add patch to fix build failure caused by lack of libcurl

In reply to Thomas Petazzoni

When json-c is enabled but libcurl is disabled, clamav tries to build the clamsubmit program, which fails with:

CC clamsubmit.o
clamsubmit.c:6:23: fatal error: curl/curl.h: No such file or directory
#include <curl/curl.h>

This is due to an incorrect curl-config detection logic, leading to /bin/curl-config being present making the configure script believe that curl is available, even when --without-libcurl is explicitly passed.

This commit adds a patch, submitted upstream, which fixes this problem.

Fixes:

http://autobuild.buildroot.net/results/c43d2ebd8ab30016969d642dbd71c297dc5f6bab/

Signed-off-by Thomas Petazzoni <[email protected]>
---
 ...zation-libs-curl.m4-fix-curl-config-detec.patch | 75 ++++++++++++++++++++++
 package/clamav/clamav.mk                           |  2 +
 2 files changed, 77 insertions(+)
 create mode 100644 package/clamav/0003-m4-reorganization-libs-curl.m4-fix-curl-config-detec.patch
package/clamav/0003-m4-reorganization-libs-curl.m4-fix-curl-config-detec.patch new file +75 -0
new file mode 100644
index 0000000000..1d26b099b9
@@ -0,0 +1,75 @@
+From 6b6ff53b5931c162be13504a1efc53fc5212f9d1 Mon Sep 17 00:00:00 2001
+From: Thomas Petazzoni <[email protected]>
+Date: Mon, 7 May 2018 22:57:34 +0200
+Subject: [PATCH] m4/reorganization/libs/curl.m4: fix curl-config detection
+ logic
+
+The current logic in curl.m4 doesn't behave properly when
+--without-libcurl is passed to the ./configure script.
+
+Indeed, in this case what happens is that:
+
+ (1) Since --without-libcurl is passed, LIBCURL_HOME is set to nothing
+
+ (2) find_curl is set to "no"
+
+ (3) Due to find_curl being "no", LIBCURL_HOME is not set to
+     /usr/local and remains empty
+
+ (4) We test if $LIBCURL_HOME/bin/curl_config exists, which is
+     equivalent to testing if /bin/curl-config exists. So curl.m4 is
+     looking at /bin/curl-config, which is irrelevant in a
+     cross-compilation context: it is not because the build machine
+     has libcurl installed that it is available for the target.
+
+     Due to this mistake, it sets have_curl="yes"
+
+Due to this, the ./configure script assumes it can build the
+clamsubmit program, which fails at build time because curl/curl.h
+doesn't exist.
+
+To fix this, this commit rewrites the curl-config detection logic with
+a simpler loop. If find_curl=yes, it means we have to find libcurl
+ourselves, so we iterate over /usr/local and /usr, and check if a
+bin/curl-config binary is available there. If so, we use this path as
+LIBCURL_HOME and set have_curl="yes".
+
+This preserves the existing behavior, while fixing the situation where
+--without-libcurl is passed, but /bin/curl-config exists.
+
+Signed-off-by: Thomas Petazzoni <[email protected]>
+Upstream-status: https://github.com/Cisco-Talos/clamav-devel/pull/87
+---
+ m4/reorganization/libs/curl.m4 | 15 +++++----------
+ 1 file changed, 5 insertions(+), 10 deletions(-)
+
+diff --git a/m4/reorganization/libs/curl.m4 b/m4/reorganization/libs/curl.m4
+index 2a5966ee7..b6a9c2137 100644
+--- a/m4/reorganization/libs/curl.m4
++++ b/m4/reorganization/libs/curl.m4
+@@ -19,17 +19,12 @@ fi
+ [find_curl="yes"])
+ 
+ if test "X$find_curl" = "Xyes"; then
+-    LIBCURL_HOME=/usr/local
+-fi
+-if test -f "$LIBCURL_HOME/bin/curl-config"; then
+-    have_curl="yes"
+-else
+-    if test "X$find_curl" = "Xyes"; then
+-        LIBCURL_HOME=/usr
+-        if test -f "$LIBCURL_HOME/bin/curl-config"; then
+-            have_curl="yes"
++    for p in /usr/local /usr ; do
++        if test -f "${p}/bin/curl-config"; then
++           LIBCURL_HOME=$p
++           have_curl="yes"
+         fi
+-    fi
++    done
+ fi
+ 
+ if test "X$have_curl" = "Xyes"; then
+-- 
+2.14.3
+
package/clamav/clamav.mk +2 -0
index 2711ca2a86..c0138a8944 100644
@@ -16,6 +16,8 @@ CLAMAV_DEPENDENCIES = \
 	openssl \
 	zlib \
 	$(TARGET_NLS_DEPENDENCIES)
+# 0003-m4-reorganization-libs-curl.m4-fix-curl-config-detec.patch
+CLAMAV_AUTORECONF = YES
 
 # mmap cannot be detected when cross-compiling, needed for mempool support
 CLAMAV_CONF_ENV = \
Signature · 1 line
2.14.3
#4 lore raw

PATCH 2/2 clamav: add patch to fix build failure caused by lack of libcurl

Thomas, All,

On 2018-05-07 23:20 +0200, Thomas Petazzoni spake thusly:

Quoted 12 lines

When json-c is enabled but libcurl is disabled, clamav tries to build the clamsubmit program, which fails with:

CC clamsubmit.o
clamsubmit.c:6:23: fatal error: curl/curl.h: No such file or directory
#include <curl/curl.h>

This is due to an incorrect curl-config detection logic, leading to /bin/curl-config being present making the configure script believe that curl is available, even when --without-libcurl is explicitly passed.

Quoted 8 lines

This commit adds a patch, submitted upstream, which fixes this problem.

Fixes:

http://autobuild.buildroot.net/results/c43d2ebd8ab30016969d642dbd71c297dc5f6bab/

Signed-off-by Thomas Petazzoni <[email protected]>

I had a bit of a trouble understanding what was going on, but now I see and the fix indeed does make sense.

Reviewed-by "Yann E. MORIN" <[email protected]>

Regards,
Yann E. MORIN.

Quoted 107 lines
---
 ...zation-libs-curl.m4-fix-curl-config-detec.patch | 75 ++++++++++++++++++++++
 package/clamav/clamav.mk                           |  2 +
 2 files changed, 77 insertions(+)
 create mode 100644 package/clamav/0003-m4-reorganization-libs-curl.m4-fix-curl-config-detec.patch
package/clamav/0003-m4-reorganization-libs-curl.m4-fix-curl-config-detec.patch new file +75 -0
new file mode 100644
index 0000000000..1d26b099b9
@@ -0,0 +1,75 @@
+From 6b6ff53b5931c162be13504a1efc53fc5212f9d1 Mon Sep 17 00:00:00 2001
+From: Thomas Petazzoni <[email protected]>
+Date: Mon, 7 May 2018 22:57:34 +0200
+Subject: [PATCH] m4/reorganization/libs/curl.m4: fix curl-config detection
+ logic
+
+The current logic in curl.m4 doesn't behave properly when
+--without-libcurl is passed to the ./configure script.
+
+Indeed, in this case what happens is that:
+
+ (1) Since --without-libcurl is passed, LIBCURL_HOME is set to nothing
+
+ (2) find_curl is set to "no"
+
+ (3) Due to find_curl being "no", LIBCURL_HOME is not set to
+     /usr/local and remains empty
+
+ (4) We test if $LIBCURL_HOME/bin/curl_config exists, which is
+     equivalent to testing if /bin/curl-config exists. So curl.m4 is
+     looking at /bin/curl-config, which is irrelevant in a
+     cross-compilation context: it is not because the build machine
+     has libcurl installed that it is available for the target.
+
+     Due to this mistake, it sets have_curl="yes"
+
+Due to this, the ./configure script assumes it can build the
+clamsubmit program, which fails at build time because curl/curl.h
+doesn't exist.
+
+To fix this, this commit rewrites the curl-config detection logic with
+a simpler loop. If find_curl=yes, it means we have to find libcurl
+ourselves, so we iterate over /usr/local and /usr, and check if a
+bin/curl-config binary is available there. If so, we use this path as
+LIBCURL_HOME and set have_curl="yes".
+
+This preserves the existing behavior, while fixing the situation where
+--without-libcurl is passed, but /bin/curl-config exists.
+
+Signed-off-by: Thomas Petazzoni <[email protected]>
+Upstream-status: https://github.com/Cisco-Talos/clamav-devel/pull/87
+---
+ m4/reorganization/libs/curl.m4 | 15 +++++----------
+ 1 file changed, 5 insertions(+), 10 deletions(-)
+
+diff --git a/m4/reorganization/libs/curl.m4 b/m4/reorganization/libs/curl.m4
+index 2a5966ee7..b6a9c2137 100644
+--- a/m4/reorganization/libs/curl.m4
++++ b/m4/reorganization/libs/curl.m4
+@@ -19,17 +19,12 @@ fi
+ [find_curl="yes"])
+ 
+ if test "X$find_curl" = "Xyes"; then
+-    LIBCURL_HOME=/usr/local
+-fi
+-if test -f "$LIBCURL_HOME/bin/curl-config"; then
+-    have_curl="yes"
+-else
+-    if test "X$find_curl" = "Xyes"; then
+-        LIBCURL_HOME=/usr
+-        if test -f "$LIBCURL_HOME/bin/curl-config"; then
+-            have_curl="yes"
++    for p in /usr/local /usr ; do
++        if test -f "${p}/bin/curl-config"; then
++           LIBCURL_HOME=$p
++           have_curl="yes"
+         fi
+-    fi
++    done
+ fi
+ 
+ if test "X$have_curl" = "Xyes"; then
+-- 
+2.14.3
+
package/clamav/clamav.mk +2 -0
index 2711ca2a86..c0138a8944 100644
@@ -16,6 +16,8 @@ CLAMAV_DEPENDENCIES = \
 	openssl \
 	zlib \
 	$(TARGET_NLS_DEPENDENCIES)
+# 0003-m4-reorganization-libs-curl.m4-fix-curl-config-detec.patch
+CLAMAV_AUTORECONF = YES
 
 # mmap cannot be detected when cross-compiling, needed for mempool support
 CLAMAV_CONF_ENV = \
Signature · 6 lines
2.14.3

_______________________________________________
buildroot mailing list
buildroot at busybox.net
http://lists.busybox.net/mailman/listinfo/buildroot
Signature · 6 lines
.-----------------.--------------------.------------------.--------------------.
|  Yann E. MORIN  | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: |
| +33 662 376 056 | Software  Designer | \ / CAMPAIGN     |  ___               |
| +33 223 225 172 `------------.-------:  X  AGAINST      |  \e/  There is no  |
| http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL    |   v   conspiracy.  |
'------------------------------^-------^------------------^--------------------'