KVM: PPC: Book3S: HV: Fix kvmppc_bad_host_intr for real mode interrupts

When CONFIG_RELOCATABLE=n, the Linux real mode interrupt handlers call into KVM using real address. This needs to be translated to the kernel linear effective address before the MMU is switched on.

kvmppc_bad_host_intr misses adding these bits, so when it is used to handle a system reset interrupt (that always gets delivered in real mode), it results in an instruction access fault immediately after the MMU is turned on.

Fix this by ensuring the stop 2 address bits are set when the MMU is turned on.

---
 arch/powerpc/kvm/book3s_hv_rmhandlers.S | 2 ++
 1 file changed, 2 insertions(+)

index d4c7bb3e777e..3b56fe1fc1b2 100644
@@ -3555,6 +3555,8 @@ END_MMU_FTR_SECTION_IFSET(MMU_FTR_TYPE_RADIX)
 	bcl	20, 31, .+4
 5:	mflr	r3
 	addi	r3, r3, 9f - 5b
+	li	r4,-1
+	rldimi	r3,r4,62,0 /* ensure 0xc000000000000000 bits are set */
 	ld	r4, PACAKMSR(r13)
 	mtspr	SPRN_SRR0, r3
 	mtspr	SPRN_SRR1, r4

2.17.0