USB: serial: ftdi_sio: use non-underscore fixed types

index 62c99871863c..0d24da03a4a3 100644
@@ -54,7 +54,7 @@ struct ftdi_private {
 	int custom_divisor;	/* custom_divisor kludge, this is for
 				   baud_base (different from what goes to the
 				   chip!) */
-	__u16 last_set_data_urb_value ;
+	u16 last_set_data_urb_value;
 				/* the last data state set - needed for doing
 				 * a break
 				 */

@@ -62,7 +62,7 @@ struct ftdi_private {
 	unsigned long last_dtr_rts;	/* saved modem control outputs */
 	char prev_status;        /* Used for TIOCMIWAIT */
 	char transmit_empty;	/* If transmitter is empty or not */
-	__u16 interface;	/* FT2232C, FT2232H or FT4232H port interface
+	u16 interface;		/* FT2232C, FT2232H or FT4232H port interface
 				   (0 for FT232/245) */
 
 	speed_t force_baud;	/* if non-zero, force the baud rate to

@@ -1063,10 +1063,10 @@ static int ftdi_get_modem_status(struct usb_serial_port *port,
 
 static unsigned short int ftdi_232am_baud_base_to_divisor(int baud, int base);
 static unsigned short int ftdi_232am_baud_to_divisor(int baud);
-static __u32 ftdi_232bm_baud_base_to_divisor(int baud, int base);
-static __u32 ftdi_232bm_baud_to_divisor(int baud);
-static __u32 ftdi_2232h_baud_base_to_divisor(int baud, int base);
-static __u32 ftdi_2232h_baud_to_divisor(int baud);
+static u32 ftdi_232bm_baud_base_to_divisor(int baud, int base);
+static u32 ftdi_232bm_baud_to_divisor(int baud);
+static u32 ftdi_2232h_baud_base_to_divisor(int baud, int base);
+static u32 ftdi_2232h_baud_to_divisor(int baud);
 
 static struct usb_serial_driver ftdi_sio_device = {
 	.driver = {

@@ -1136,14 +1136,14 @@ static unsigned short int ftdi_232am_baud_to_divisor(int baud)
 	 return ftdi_232am_baud_base_to_divisor(baud, 48000000);
 }
 
-static __u32 ftdi_232bm_baud_base_to_divisor(int baud, int base)
+static u32 ftdi_232bm_baud_base_to_divisor(int baud, int base)
 {
 	static const unsigned char divfrac[8] = { 0, 3, 2, 4, 1, 5, 6, 7 };
-	__u32 divisor;
+	u32 divisor;
 	/* divisor shifted 3 bits to the left */
 	int divisor3 = base / 2 / baud;
 	divisor = divisor3 >> 3;
-	divisor |= (__u32)divfrac[divisor3 & 0x7] << 14;
+	divisor |= (u32)divfrac[divisor3 & 0x7] << 14;
 	/* Deal with special cases for highest baud rates. */
 	if (divisor == 1)
 		divisor = 0;

@@ -1152,22 +1152,22 @@ static __u32 ftdi_232bm_baud_base_to_divisor(int baud, int base)
 	return divisor;
 }
 
-static __u32 ftdi_232bm_baud_to_divisor(int baud)
+static u32 ftdi_232bm_baud_to_divisor(int baud)
 {
 	 return ftdi_232bm_baud_base_to_divisor(baud, 48000000);
 }
 
-static __u32 ftdi_2232h_baud_base_to_divisor(int baud, int base)
+static u32 ftdi_2232h_baud_base_to_divisor(int baud, int base)
 {
 	static const unsigned char divfrac[8] = { 0, 3, 2, 4, 1, 5, 6, 7 };
-	__u32 divisor;
+	u32 divisor;
 	int divisor3;
 
 	/* hi-speed baud rate is 10-bit sampling instead of 16-bit */
 	divisor3 = base * 8 / (baud * 10);
 
 	divisor = divisor3 >> 3;
-	divisor |= (__u32)divfrac[divisor3 & 0x7] << 14;
+	divisor |= (u32)divfrac[divisor3 & 0x7] << 14;
 	/* Deal with special cases for highest baud rates. */
 	if (divisor == 1)
 		divisor = 0;

@@ -1182,7 +1182,7 @@ static __u32 ftdi_2232h_baud_base_to_divisor(int baud, int base)
 	return divisor;
 }
 
-static __u32 ftdi_2232h_baud_to_divisor(int baud)
+static u32 ftdi_2232h_baud_to_divisor(int baud)
 {
 	 return ftdi_2232h_baud_base_to_divisor(baud, 120000000);
 }

@@ -1236,12 +1236,12 @@ static int update_mctrl(struct usb_serial_port *port, unsigned int set,
 }
 
 
-static __u32 get_ftdi_divisor(struct tty_struct *tty,
+static u32 get_ftdi_divisor(struct tty_struct *tty,
 						struct usb_serial_port *port)
 {
 	struct ftdi_private *priv = usb_get_serial_port_data(port);
 	struct device *dev = &port->dev;
-	__u32 div_value = 0;
+	u32 div_value = 0;
 	int div_okay = 1;
 	int baud;
 

@@ -1299,7 +1299,7 @@ static __u32 get_ftdi_divisor(struct tty_struct *tty,
 	case FT232RL: /* FT232RL chip */
 	case FTX:     /* FT-X series */
 		if (baud <= 3000000) {
-			__u16 product_id = le16_to_cpu(
+			u16 product_id = le16_to_cpu(
 				port->serial->dev->descriptor.idProduct);
 			if (((product_id == FTDI_NDI_HUC_PID)		||
 			     (product_id == FTDI_NDI_SPECTRA_SCU_PID)	||

@@ -1346,19 +1346,19 @@ static __u32 get_ftdi_divisor(struct tty_struct *tty,
 static int change_speed(struct tty_struct *tty, struct usb_serial_port *port)
 {
 	struct ftdi_private *priv = usb_get_serial_port_data(port);
-	__u16 urb_value;
-	__u16 urb_index;
-	__u32 urb_index_value;
+	u16 urb_value;
+	u16 urb_index;
+	u32 urb_index_value;
 	int rv;
 
 	urb_index_value = get_ftdi_divisor(tty, port);
-	urb_value = (__u16)urb_index_value;
-	urb_index = (__u16)(urb_index_value >> 16);
+	urb_value = (u16)urb_index_value;
+	urb_index = (u16)(urb_index_value >> 16);
 	if ((priv->chip_type == FT2232C) || (priv->chip_type == FT2232H) ||
 		(priv->chip_type == FT4232H) || (priv->chip_type == FT232H)) {
 		/* Probably the BM type needs the MSB of the encoded fractional
 		 * divider also moved like for the chips above. Any infos? */
-		urb_index = (__u16)((urb_index << 8) | priv->interface);
+		urb_index = (u16)((urb_index << 8) | priv->interface);
 	}
 
 	rv = usb_control_msg(port->serial->dev,

@@ -2140,7 +2140,7 @@ static void ftdi_break_ctl(struct tty_struct *tty, int break_state)
 {
 	struct usb_serial_port *port = tty->driver_data;
 	struct ftdi_private *priv = usb_get_serial_port_data(port);
-	__u16 urb_value;
+	u16 urb_value;
 
 	/* break_state = -1 to turn on break, and 0 to turn off break */
 	/* see drivers/char/tty_io.c to see it used */

@@ -2192,7 +2192,7 @@ static void ftdi_set_termios(struct tty_struct *tty,
 	struct ftdi_private *priv = usb_get_serial_port_data(port);
 	struct ktermios *termios = &tty->termios;
 	unsigned int cflag = termios->c_cflag;
-	__u16 urb_value; /* will hold the new flags */
+	u16 urb_value; /* will hold the new flags */
 
 	/* Added for xon/xoff support */
 	unsigned int iflag = termios->c_iflag;