ARM: dts: am3517-evm: Remove unnessary PMIC parameters
PATCH 1/1 ARM: dts: am3517-evm: Remove unnessary PMIC parameters
The AM3517-EVM uses a TPS65023 PMIC. This is already defined
by: compatible = "ti,tps65023"
There doesn't seem to be a need to have each regulator in the PMIC with the 'compatible = "regulator-fixed"' since each regulator has a min and max setting.
arch/arm/boot/dts/am3517-som.dtsi +0 -5
@@ -64,7 +64,6 @@ regulators { vdd_core_reg: VDCDC1 { regulator-name = "vdd_core"; - compatible = "regulator-fixed"; regulator-always-on; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>;
@@ -72,7 +71,6 @@ vdd_io_reg: VDCDC2 { regulator-name = "vdd_io"; - compatible = "regulator-fixed"; regulator-always-on; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>;
@@ -80,7 +78,6 @@ vdd_1v8_reg: VDCDC3 { regulator-name = "vdd_1v8"; - compatible = "regulator-fixed"; regulator-always-on; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>;
@@ -88,7 +85,6 @@ vdd_usb18_reg: LDO1 { regulator-name = "vdd_usb18"; - compatible = "regulator-fixed"; regulator-always-on; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>;
@@ -96,7 +92,6 @@ vdd_usb33_reg: LDO2 { regulator-name = "vdd_usb33"; - compatible = "regulator-fixed"; regulator-always-on; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>;
Signature · 1 line
2.17.0
Quoted 10 lines · Adam Ford
The AM3517-EVM uses a TPS65023 PMIC. This is already defined
by: compatible = "ti,tps65023"There doesn't seem to be a need to have each regulator in the PMIC with the 'compatible = "regulator-fixed"' since each regulator has a min and max setting.
Signed-off-by Adam Ford <[email protected]>
Gentle nudge
adam
Quoted 47 lines
arch/arm/boot/dts/am3517-som.dtsi +0
-6@@ -64,7 +64,6 @@ regulators { vdd_core_reg: VDCDC1 { regulator-name = "vdd_core"; - compatible = "regulator-fixed"; regulator-always-on; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>;@@ -72,7 +71,6 @@ vdd_io_reg: VDCDC2 { regulator-name = "vdd_io"; - compatible = "regulator-fixed"; regulator-always-on; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>;@@ -80,7 +78,6 @@ vdd_1v8_reg: VDCDC3 { regulator-name = "vdd_1v8"; - compatible = "regulator-fixed"; regulator-always-on; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>;@@ -88,7 +85,6 @@ vdd_usb18_reg: LDO1 { regulator-name = "vdd_usb18"; - compatible = "regulator-fixed"; regulator-always-on; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>;@@ -96,7 +92,6 @@ vdd_usb33_reg: LDO2 { regulator-name = "vdd_usb33"; - compatible = "regulator-fixed"; regulator-always-on; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; --2.17.0
Quoted 5 lines · Adam Ford
Quoted 4 lines · Adam Ford
The AM3517-EVM uses a TPS65023 PMIC. This is already defined
by: compatible = "ti,tps65023"
Quoted 8 lines
Quoted 6 lines
There doesn't seem to be a need to have each regulator in the PMIC with the 'compatible = "regulator-fixed"' since each regulator has a min and max setting.
Signed-off-by Adam Ford <[email protected]>Gentle nudge
Sorry for the delay, applying into omap-for-v4.19/dt thanks.
Regards,
Tony