net: phy: phylink: Don't release NULL GPIO
Subsystems (4)
PATCH 1/1 net: phy: phylink: Don't release NULL GPIO
If CONFIG_GPIOLIB is disabled, gpiod_put() becomes a stub that produces a warning, this helped identify that we could be attempting to release a NULL pl->link_gpio GPIO descriptor, so guard against that.
--- drivers/net/phy/phylink.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/net/phy/phylink.c +1 -1
@@ -624,7 +624,7 @@ void phylink_destroy(struct phylink *pl) {if (pl->sfp_bus)sfp_unregister_upstream (pl->sfp_bus); -if (!IS_ERR (pl->link_gpio)) +if (!IS_ERR_OR_NULL (pl->link_gpio))gpiod_put (pl->link_gpio);cancel_work_sync (&pl->resolve);
Signature · 1 line
2.14.1
Quoted 6 lines · Florian Fainelli
If
CONFIG_GPIOLIBis disabled,gpiod_put()becomes a stub that produces a warning, this helped identify that we could be attempting to release a NULLpl->link_gpioGPIO descriptor, so guard against that.Fixes daab3349ad1a ("net: phy: phylink: Release link GPIO")Signed-off-by Florian Fainelli <[email protected]>
Andrew
From: Florian Fainelli <[email protected]>
Date: Sun, 20 May 2018 20:49:47 -0700
Quoted 6 lines
If
CONFIG_GPIOLIBis disabled,gpiod_put()becomes a stub that produces a warning, this helped identify that we could be attempting to release a NULLpl->link_gpioGPIO descriptor, so guard against that.Fixes daab3349ad1a ("net: phy: phylink: Release link GPIO")Signed-off-by Florian Fainelli <[email protected]>
Applied.