Skip to contentSkip to conversation

dt: bindings: lm3601x: Introduce the lm3601x driver

PATCH Superseded Dan Murphy 3 participants 7 messages May 22, 2018

Subsystems (2)

v8 of 9 Superseded Latest is v9 →

lore
Share & tools
lore

Dan Murphy

author
#0 lore raw

PATCH v8 1/2 dt: bindings: lm3601x: Introduce the lm3601x driver

Introduce the device tree bindings for the lm3601x family of LED torch, flash and IR drivers.

---

v8 - No changes - https://patchwork.kernel.org/patch/10416161/

v7 - Removed led-sources in favor of reg, fixed malformatted ranges - https://patchwork.kernel.org/patch/10401435/
v6 - Removed multiple led child nodes, fixed example to display micro ranges
for corresponding child nodes and added led-sources to define the current driver -
https://patchwork.kernel.org/patch/10392121/
v5 - No changes - https://patchwork.kernel.org/patch/10391743/
v4 - Added " " around "=", changed strobe to flash on label, removed "support and
register" comment and change ir lable to ir:torch - See v2 patchworks for comments
v3 - Removed wildcard compatible - https://patchwork.kernel.org/patch/10386241/
v2 - No changes - https://patchwork.kernel.org/patch/10384587/

 .../devicetree/bindings/leds/leds-lm3601x.txt | 45 +++++++++++++++++++
 1 file changed, 45 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/leds/leds-lm3601x.txt
Documentation/devicetree/bindings/leds/leds-lm3601x.txt new file +45 -0
new file mode 100644
index 000000000000..a88b2c41e75b
@@ -0,0 +1,45 @@
+* Texas Instruments - lm3601x Single-LED Flash Driver
+
+The LM3601X are ultra-small LED flash drivers that
+provide a high level of adjustability.
+
+Required properties:
+	- compatible : Can be one of the following
+		"ti,lm36010"
+		"ti,lm36011"
+	- reg : I2C slave address
+	- #address-cells : 1
+	- #size-cells : 0
+
+Required child properties:
+	- reg : 0 - Indicates a IR mode
+		1 - Indicates a Torch (white LED) mode
+
+Required properties for flash LED child nodes:
+	See Documentation/devicetree/bindings/leds/common.txt
+	- flash-max-microamp : Range from 11mA - 1.5A
+	- flash-max-timeout-us : Range from 40ms - 1600ms
+	- led-max-microamp : Range from 2.4mA - 376mA
+
+Optional child properties:
+	- label : see Documentation/devicetree/bindings/leds/common.txt
+
+Example:
+led-controller@64 {
+	compatible = "ti,lm36010";
+	#address-cells = <1>;
+	#size-cells = <0>;
+	reg = <0x64>;
+
+	led@0 {
+		reg = <1>;
+		label = "white:torch";
+		led-max-microamp = <376000>;
+		flash-max-microamp = <1500000>;
+		flash-max-timeout-us = <1600000>;
+	};
+}
+
+For more product information please see the links below:
+http://www.ti.com/product/LM36010
+http://www.ti.com/product/LM36011
Signature · 1 line
2.17.0.582.gccdcbd54c
author
#1 lore raw

PATCH v8 2/2 leds: lm3601x: Introduce the lm3601x LED driver

Introduce the family of LED devices that can
drive a torch, strobe or IR LED.

The LED driver can be configured with a strobe
timer to execute a strobe flash. The IR LED
brightness is controlled via the torch brightness
register.

The data sheet for each the LM36010 and LM36011
LED drivers can be found here:
http://www.ti.com/product/LM36010
http://www.ti.com/product/LM36011

---

v8 - Removed OF Kconfig dependency, change strobe to flash, updated label generation,
fixed brightness calculation, added mutex_destroy and flash_unregister - https://patchwork.kernel.org/patch/10416163/

v7 - Numerous fixes to many to list. Highlights are moved from OF APIs to device_property APIs, updated LED registration, timeout to reg algorithim, and fixed label generation -
https://patchwork.kernel.org/patch/10401437/
v6 - This driver has been heavily modified from v5. There is no longer reading
of individual child nodes. There are too many changes to list here see -
https://patchwork.kernel.org/patch/10392123/
v5 - Fixed magic numbers, change reg cache type, added of_put_node to release
the dt node ref, and I did not change the remove function to leave the LED in its
state on driver removal - https://patchwork.kernel.org/patch/10391741/
v4 - Fixed Cocci issue using ARRAY_SIZE - https://patchwork.kernel.org/patch/10389259/
v3 - removed wildcard dt compatible, fixed copyright, fixed struct doc, removed
RO registers from default, added regmap volatile for FLAGS_REG, updated regmap cache type, fixed unlock and extra semi colon in strobe_set, removed unnecessary out label
in led register and fixed checking of the ret in brightness_set - https://patchwork.kernel.org/patch/10386243/
v2 - Fixed kbuild issue and removed unused cdev_strobe - https://patchwork.kernel.org/patch/10384585/

 drivers/leds/Kconfig        |   9 +
 drivers/leds/Makefile       |   1 +
 drivers/leds/leds-lm3601x.c | 492 ++++++++++++++++++++++++++++++++++++
 3 files changed, 502 insertions(+)
 create mode 100644 drivers/leds/leds-lm3601x.c
drivers/leds/Kconfig +9 -0
index 2c896c0e69e1..d95d436e6089 100644
@@ -145,6 +145,15 @@ config LEDS_LM3692X
 	  This option enables support for the TI LM3692x family
 	  of white LED string drivers used for backlighting.
 
+config LEDS_LM3601X
+	tristate "LED support for LM3601x Chips"
+	depends on LEDS_CLASS && I2C
+	depends on LEDS_CLASS_FLASH
+	select REGMAP_I2C
+	help
+	  This option enables support for the TI LM3601x family
+	  of flash, torch and indicator classes.
+
 config LEDS_LOCOMO
 	tristate "LED Support for Locomo device"
 	depends on LEDS_CLASS
drivers/leds/Makefile +1 -0
index 91eca81cae82..b79807fe1b67 100644
@@ -76,6 +76,7 @@ obj-$(CONFIG_LEDS_MLXREG)		+= leds-mlxreg.o
 obj-$(CONFIG_LEDS_NIC78BX)		+= leds-nic78bx.o
 obj-$(CONFIG_LEDS_MT6323)		+= leds-mt6323.o
 obj-$(CONFIG_LEDS_LM3692X)		+= leds-lm3692x.o
+obj-$(CONFIG_LEDS_LM3601X)		+= leds-lm3601x.o
 
 # LED SPI Drivers
 obj-$(CONFIG_LEDS_DAC124S085)		+= leds-dac124s085.o
drivers/leds/leds-lm3601x.c new file +492 -0

492 lines not on this page · raw message

Signature · 1 line
2.17.0.582.gccdcbd54c
#2 lore raw

Re: [PATCH v8 2/2] leds: lm3601x: Introduce the lm3601x LED driver

Quoted 205 lines · Dan Murphy

Introduce the family of LED devices that can
drive a torch, strobe or IR LED.

The LED driver can be configured with a strobe
timer to execute a strobe flash. The IR LED
brightness is controlled via the torch brightness
register.

The data sheet for each the LM36010 and LM36011
LED drivers can be found here:
http://www.ti.com/product/LM36010
http://www.ti.com/product/LM36011

---

v8 - Removed OF Kconfig dependency, change strobe to flash, updated label generation,
fixed brightness calculation, added mutex_destroy and flash_unregister - https://patchwork.kernel.org/patch/10416163/

v7 - Numerous fixes to many to list. Highlights are moved from OF APIs to device_property APIs, updated LED registration, timeout to reg algorithim, and fixed label generation -
https://patchwork.kernel.org/patch/10401437/
v6 - This driver has been heavily modified from v5. There is no longer reading
of individual child nodes. There are too many changes to list here see -
https://patchwork.kernel.org/patch/10392123/
v5 - Fixed magic numbers, change reg cache type, added of_put_node to release
the dt node ref, and I did not change the remove function to leave the LED in its
state on driver removal - https://patchwork.kernel.org/patch/10391741/
v4 - Fixed Cocci issue using ARRAY_SIZE - https://patchwork.kernel.org/patch/10389259/
v3 - removed wildcard dt compatible, fixed copyright, fixed struct doc, removed
RO registers from default, added regmap volatile for FLAGS_REG, updated regmap cache type, fixed unlock and extra semi colon in strobe_set, removed unnecessary out label
in led register and fixed checking of the ret in brightness_set - https://patchwork.kernel.org/patch/10386243/
v2 - Fixed kbuild issue and removed unused cdev_strobe - https://patchwork.kernel.org/patch/10384585/

 drivers/leds/Kconfig        |   9 +
 drivers/leds/Makefile       |   1 +
 drivers/leds/leds-lm3601x.c | 492 ++++++++++++++++++++++++++++++++++++
 3 files changed, 502 insertions(+)
 create mode 100644 drivers/leds/leds-lm3601x.c
drivers/leds/Kconfig +9 -0
index 2c896c0e69e1..d95d436e6089 100644
@@ -145,6 +145,15 @@ config LEDS_LM3692X
          This option enables support for the TI LM3692x family
          of white LED string drivers used for backlighting.
 
+config LEDS_LM3601X
+       tristate "LED support for LM3601x Chips"
+       depends on LEDS_CLASS && I2C
+       depends on LEDS_CLASS_FLASH
+       select REGMAP_I2C
+       help
+         This option enables support for the TI LM3601x family
+         of flash, torch and indicator classes.
+
 config LEDS_LOCOMO
        tristate "LED Support for Locomo device"
        depends on LEDS_CLASS
drivers/leds/Makefile +1 -0
index 91eca81cae82..b79807fe1b67 100644
@@ -76,6 +76,7 @@ obj-$(CONFIG_LEDS_MLXREG)             += leds-mlxreg.o
 obj-$(CONFIG_LEDS_NIC78BX)             += leds-nic78bx.o
 obj-$(CONFIG_LEDS_MT6323)              += leds-mt6323.o
 obj-$(CONFIG_LEDS_LM3692X)             += leds-lm3692x.o
+obj-$(CONFIG_LEDS_LM3601X)             += leds-lm3601x.o
 
 # LED SPI Drivers
 obj-$(CONFIG_LEDS_DAC124S085)          += leds-dac124s085.o
drivers/leds/leds-lm3601x.c new file +125 -0
new file mode 100644
index 000000000000..b1f0ede704c1
@@ -0,0 +1,492 @@
+// SPDX-License-Identifier: GPL-2.0
+// Flash and torch driver for Texas Instruments LM3601X LED
+// Flash driver chip family
+// Copyright (C) 2018 Texas Instruments Incorporated - http://www.ti.com/
+
+#include <linux/delay.h>
+#include <linux/i2c.h>
+#include <linux/leds.h>
+#include <linux/led-class-flash.h>
+#include <linux/module.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+#include <uapi/linux/uleds.h>
+
+#define LM3601X_LED_IR         0x0
+#define LM3601X_LED_TORCH      0x1
+
+/* Registers */
+#define LM3601X_ENABLE_REG     0x01
+#define LM3601X_CFG_REG                0x02
+#define LM3601X_LED_FLASH_REG  0x03
+#define LM3601X_LED_TORCH_REG  0x04
+#define LM3601X_FLAGS_REG      0x05
+#define LM3601X_DEV_ID_REG     0x06
+
+#define LM3601X_SW_RESET       BIT(7)
+
+/* Enable Mode bits */
+#define LM3601X_MODE_STANDBY   0x00
+#define LM3601X_MODE_IR_DRV    BIT(0)
+#define LM3601X_MODE_TORCH     BIT(1)
+#define LM3601X_MODE_STROBE    (BIT(0) | BIT(1))
+#define LM3601X_STRB_EN                BIT(2)
+#define LM3601X_STRB_EDGE_TRIG BIT(3)
+#define LM3601X_IVFM_EN                BIT(4)
+
+#define LM36010_BOOST_LIMIT_28 BIT(5)
+#define LM36010_BOOST_FREQ_4MHZ        BIT(6)
+#define LM36010_BOOST_MODE_PASS        BIT(7)
+
+/* Flag Mask */
+#define LM3601X_FLASH_TIME_OUT BIT(0)
+#define LM3601X_UVLO_FAULT     BIT(1)
+#define LM3601X_THERM_SHUTDOWN BIT(2)
+#define LM3601X_THERM_CURR     BIT(3)
+#define LM36010_CURR_LIMIT     BIT(4)
+#define LM3601X_SHORT_FAULT    BIT(5)
+#define LM3601X_IVFM_TRIP      BIT(6)
+#define LM36010_OVP_FAULT      BIT(7)
+
+#define LM3601X_MAX_TORCH_I_UA 376000
+#define LM3601X_MIN_TORCH_I_UA 2400
+#define LM3601X_TORCH_REG_DIV  2965
+
+#define LM3601X_MAX_STROBE_I_UA        1500000
+#define LM3601X_MIN_STROBE_I_UA        11000
+#define LM3601X_STROBE_REG_DIV 11800
+
+#define LM3601X_TIMEOUT_MASK   0x1e
+#define LM3601X_ENABLE_MASK    (LM3601X_MODE_IR_DRV | LM3601X_MODE_TORCH)
+
+#define LM3601X_LOWER_STEP_US  40000
+#define LM3601X_UPPER_STEP_US  200000
+#define LM3601X_MIN_TIMEOUT_US 40000
+#define LM3601X_MAX_TIMEOUT_US 1600000
+#define LM3601X_TIMEOUT_XOVER_US 400000
+
+enum lm3601x_type {
+       CHIP_LM36010 = 0,
+       CHIP_LM36011,
+};
+
+/**
+ * struct lm3601x_led -
+ * @fled_cdev: flash LED class device pointer
+ * @client: Pointer to the I2C client
+ * @regmap: Devices register map
+ * @lock: Lock for reading/writing the device
+ * @led_name: LED label for the Torch or IR LED
+ * @flash_timeout: the timeout for the flash
+ * @last_flag: last known flags register value
+ * @torch_current_max: maximum current for the torch
+ * @flash_current_max: maximum current for the flash
+ * @max_flash_timeout: maximum timeout for the flash
+ * @led_mode: The mode to enable either IR or Torch
+ */
+struct lm3601x_led {
+       struct led_classdev_flash fled_cdev;
+       struct i2c_client *client;
+       struct regmap *regmap;
+       struct mutex lock;
+
+       char led_name[LED_MAX_NAME_SIZE];
+
+       unsigned int flash_timeout;
+       unsigned int last_flag;
+
+       u32 torch_current_max;
+       u32 flash_current_max;
+       u32 max_flash_timeout;
+
+       u32 led_mode;
+};
+
+static const struct reg_default lm3601x_regmap_defs[] = {
+       { LM3601X_ENABLE_REG, 0x20 },
+       { LM3601X_CFG_REG, 0x15 },
+       { LM3601X_LED_FLASH_REG, 0x00 },
+       { LM3601X_LED_TORCH_REG, 0x00 },
+};
+
+static bool lm3601x_volatile_reg(struct device *dev, unsigned int reg)
+{
+       switch (reg) {
+       case LM3601X_FLAGS_REG:
+               return true;
+       default:
+               return false;
+       }
+}
+
+static const struct regmap_config lm3601x_regmap = {
+       .reg_bits = 8,
+       .val_bits = 8,
+

drivers/leds/leds-lm3601x.c line 134

Quoted 10 lines
drivers/leds/leds-lm3601x.c new file +9 -0
+       .max_register = LM3601X_DEV_ID_REG,
+       .reg_defaults = lm3601x_regmap_defs,
+       .num_reg_defaults = ARRAY_SIZE(lm3601x_regmap_defs),
+       .cache_type = REGCACHE_RBTREE,
+       .volatile_reg = lm3601x_volatile_reg,
+};
+
 
+static struct lm3601x_led *fled_cdev_to_led(
+                               struct led_classdev_flash *fled_cdev)

Didn't notice before. This will look much better in one line.

Quoted 71 lines
drivers/leds/leds-lm3601x.c new file +71 -0
+{
+       return container_of(fled_cdev, struct lm3601x_led, fled_cdev);
+}
+
+static int lm3601x_read_faults(struct lm3601x_led *led)
+{
+       int flags_val;
+       int ret;
+
+       ret = regmap_read(led->regmap, LM3601X_FLAGS_REG, &flags_val);
+       if (ret < 0)
+               return -EIO;
+
+       led->last_flag = 0;
+
+       if (flags_val & LM36010_OVP_FAULT)
+               led->last_flag |= LED_FAULT_OVER_VOLTAGE;
+
+       if (flags_val & (LM3601X_THERM_SHUTDOWN | LM3601X_THERM_CURR))
+               led->last_flag |= LED_FAULT_OVER_TEMPERATURE;
+
+       if (flags_val & LM3601X_SHORT_FAULT)
+               led->last_flag |= LED_FAULT_SHORT_CIRCUIT;
+
+       if (flags_val & LM36010_CURR_LIMIT)
+               led->last_flag |= LED_FAULT_OVER_CURRENT;
+
+       if (flags_val & LM3601X_UVLO_FAULT)
+               led->last_flag |= LED_FAULT_UNDER_VOLTAGE;
+
+       if (flags_val & LM3601X_IVFM_TRIP)
+               led->last_flag |= LED_FAULT_INPUT_VOLTAGE;
+
+       if (flags_val & LM3601X_THERM_SHUTDOWN)
+               led->last_flag |= LED_FAULT_LED_OVER_TEMPERATURE;
+
+       return led->last_flag;
+}
+
+static int lm3601x_brightness_set(struct led_classdev *cdev,
+                                       enum led_brightness brightness)
+{
+       struct led_classdev_flash *fled_cdev = lcdev_to_flcdev(cdev);
+       struct lm3601x_led *led = fled_cdev_to_led(fled_cdev);
+       int ret, led_mode_val;
+
+       mutex_lock(&led->lock);
+
+       ret = lm3601x_read_faults(led);
+       if (ret < 0)
+               goto out;
+
+       if (led->led_mode == LM3601X_LED_TORCH)
+               led_mode_val = LM3601X_MODE_TORCH;
+       else
+               led_mode_val = LM3601X_MODE_IR_DRV;
+
+       if (brightness == LED_OFF) {
+               ret = regmap_update_bits(led->regmap, LM3601X_ENABLE_REG,
+                                       led_mode_val, LED_OFF);
+               goto out;
+       }
+
+       ret = regmap_write(led->regmap, LM3601X_LED_TORCH_REG, brightness);
+       if (ret < 0)
+               goto out;
+
+       ret = regmap_update_bits(led->regmap, LM3601X_ENABLE_REG,
+                               LM3601X_MODE_TORCH | LM3601X_MODE_IR_DRV,
+                               led_mode_val);
+out:

drivers/leds/leds-lm3601x.c line 214

Quoted 10 lines
drivers/leds/leds-lm3601x.c new file +9 -0
+       mutex_unlock(&led->lock);
+       return ret;
+}
+
+static int lm3601x_flash_set(struct led_classdev_flash *fled_cdev,
+                               bool state)
+{
+       struct lm3601x_led *led = fled_cdev_to_led(fled_cdev);
 
+       int timeout_reg_val = 0;

Redundant assignment.

Quoted 29 lines
drivers/leds/leds-lm3601x.c new file +29 -0
+       int current_timeout;
+       int ret;
+
+       mutex_lock(&led->lock);
+
+       ret = regmap_read(led->regmap, LM3601X_CFG_REG, &current_timeout);
+       if (ret < 0)
+               goto out;
+
+       if (led->flash_timeout >= LM3601X_TIMEOUT_XOVER_US)
+               timeout_reg_val = led->flash_timeout / LM3601X_UPPER_STEP_US + 0x07;
+       else
+               timeout_reg_val = led->flash_timeout / LM3601X_LOWER_STEP_US - 0x01;
+
+       if (led->flash_timeout != current_timeout)
+               ret = regmap_update_bits(led->regmap, LM3601X_CFG_REG,
+                                       LM3601X_TIMEOUT_MASK, timeout_reg_val);
+
+       if (state)
+               ret = regmap_update_bits(led->regmap, LM3601X_ENABLE_REG,
+                                       LM3601X_MODE_TORCH | LM3601X_MODE_IR_DRV,
+                                       LM3601X_MODE_STROBE);
+       else
+               ret = regmap_update_bits(led->regmap, LM3601X_ENABLE_REG,
+                                       LM3601X_MODE_STROBE, LED_OFF);
+
+       ret = lm3601x_read_faults(led);
+out:
+       mutex_unlock(&led->lock);

drivers/leds/leds-lm3601x.c line 252

Quoted 10 lines
drivers/leds/leds-lm3601x.c new file +9 -0
+       return ret;
+}
+
+static int lm3601x_flash_brightness_set(struct led_classdev_flash *fled_cdev,
+                                       u32 brightness)
+{
+       struct lm3601x_led *led = fled_cdev_to_led(fled_cdev);
 
+       int ret;
+       u8 brightness_val;

Better to read reversed xmas tree order.

Quoted 16 lines
drivers/leds/leds-lm3601x.c new file +16 -0
+
+       mutex_lock(&led->lock);
+       ret = lm3601x_read_faults(led);
+       if (ret < 0)
+               goto out;
+
+       if (brightness == LED_OFF) {
+               ret = regmap_update_bits(led->regmap, LM3601X_ENABLE_REG,
+                                       LM3601X_MODE_STROBE, LED_OFF);
+               goto out;
+       }
+
+       brightness_val = brightness / LM3601X_STROBE_REG_DIV;
+
+       ret = regmap_write(led->regmap, LM3601X_LED_FLASH_REG, brightness_val);
+out:

drivers/leds/leds-lm3601x.c line 277

Quoted 10 lines
drivers/leds/leds-lm3601x.c new file +9 -0
+       mutex_unlock(&led->lock);
+       return ret;
+}
+
+static int lm3601x_flash_timeout_set(struct led_classdev_flash *fled_cdev,
+                               u32 timeout)
+{
+       struct lm3601x_led *led = fled_cdev_to_led(fled_cdev);
 
+       int ret = 0;

Redundant variable.

Quoted 72 lines
drivers/leds/leds-lm3601x.c new file +72 -0
+
+       mutex_lock(&led->lock);
+
+       led->flash_timeout = timeout;
+
+       mutex_unlock(&led->lock);
+
+       return ret;
+}
+
+static int lm3601x_flash_get(struct led_classdev_flash *fled_cdev,
+                               bool *state)
+{
+       struct lm3601x_led *led = fled_cdev_to_led(fled_cdev);
+       int ret;
+       int flash_state;
+
+       mutex_lock(&led->lock);
+
+       ret = regmap_read(led->regmap, LM3601X_ENABLE_REG, &flash_state);
+       if (ret < 0)
+               goto out;
+
+       *state = flash_state & LM3601X_MODE_STROBE;
+
+out:
+       mutex_unlock(&led->lock);
+       return ret;
+}
+
+static int lm3601x_flash_fault_get(struct led_classdev_flash *fled_cdev,
+                               u32 *fault)
+{
+       struct lm3601x_led *led = fled_cdev_to_led(fled_cdev);
+
+       lm3601x_read_faults(led);
+
+       *fault = led->last_flag;
+
+       return 0;
+}
+
+static const struct led_flash_ops flash_ops = {
+       .flash_brightness_set   = lm3601x_flash_brightness_set,
+       .strobe_set             = lm3601x_flash_set,
+       .strobe_get             = lm3601x_flash_get,
+       .timeout_set            = lm3601x_flash_timeout_set,
+       .fault_get              = lm3601x_flash_fault_get,
+};
+
+static int lm3601x_register_leds(struct lm3601x_led *led)
+{
+       struct led_classdev *led_cdev;
+       struct led_flash_setting *setting;
+
+       led->fled_cdev.ops = &flash_ops;
+
+       setting = &led->fled_cdev.timeout;
+       setting->min = LM3601X_MIN_TIMEOUT_US;
+       setting->max = led->max_flash_timeout;
+       setting->step = LM3601X_LOWER_STEP_US;
+       setting->val = led->max_flash_timeout;
+
+       setting = &led->fled_cdev.brightness;
+       setting->min = LM3601X_MIN_STROBE_I_UA;
+       setting->max = led->flash_current_max;
+       setting->step = LM3601X_TORCH_REG_DIV;
+       setting->val = led->flash_current_max;
+
+       led_cdev = &led->fled_cdev.led_cdev;
+       led_cdev->name = led->led_name;
+       led_cdev->brightness_set_blocking = lm3601x_brightness_set;

drivers/leds/leds-lm3601x.c line 358

Quoted 10 lines
drivers/leds/leds-lm3601x.c new file +9 -0
+       led_cdev->max_brightness = DIV_ROUND_UP(led->torch_current_max,
+                                               LM3601X_TORCH_REG_DIV);
+       led_cdev->flags |= LED_DEV_CAP_FLASH;
+
+       return led_classdev_flash_register(&led->client->dev, &led->fled_cdev);
+}
+
+static int lm3601x_parse_node(struct lm3601x_led *led,
 
+                             struct device_node *node)

I don't see how it's used.

Quoted 29 lines
drivers/leds/leds-lm3601x.c new file +29 -0
+{
+       struct fwnode_handle *child = NULL;
+       int ret = -ENODEV;
+       const char *name;
+
+       child = device_get_next_child_node(&led->client->dev, child);
+       if (!child) {
+               dev_err(&led->client->dev, "No LED Child node\n");
+               return ret;
+       }
+
+       ret = fwnode_property_read_u32(child, "reg", &led->led_mode);
+       if (ret) {
+               dev_err(&led->client->dev, "reg DT property missing\n");
+               goto out_err;
+       }
+
+       if (led->led_mode > LM3601X_LED_TORCH ||
+           led->led_mode < LM3601X_LED_IR) {
+               dev_warn(&led->client->dev, "Invalid led mode requested\n");
+               ret = -EINVAL;
+               goto out_err;
+       }
+
+       ret = fwnode_property_read_string(child, "label", &name);
+       if (ret) {
+               if (led->led_mode == LM3601X_LED_TORCH)
+                       name = "torch";
+               else

drivers/leds/leds-lm3601x.c line 396

Quoted 10 lines
drivers/leds/leds-lm3601x.c new file +9 -0
+                       name = "infrared";
+       }
+
+       snprintf(led->led_name, sizeof(led->led_name),
+               "%s:%s", led->client->name, name);
+
+       ret = fwnode_property_read_u32(child, "led-max-microamp",
+                                       &led->torch_current_max);
 
+       if (ret < 0) {

Be consistent with above or other way around.

Quoted 22 lines
drivers/leds/leds-lm3601x.c new file +22 -0
+               dev_warn(&led->client->dev,
+                       "led-max-microamp DT property missing\n");
+               goto out_err;
+       }
+
+       ret = fwnode_property_read_u32(child, "flash-max-microamp",
+                               &led->flash_current_max);
+       if (ret < 0) {
+               dev_warn(&led->client->dev,
+                        "flash-max-microamp DT property missing\n");
+               goto out_err;
+       }
+
+       ret = fwnode_property_read_u32(child, "flash-max-timeout-us",
+                               &led->max_flash_timeout);
+       if (ret < 0) {
+               dev_warn(&led->client->dev,
+                        "flash-max-timeout-us DT property missing\n");
+               goto out_err;
+       }
+
+out_err:

drivers/leds/leds-lm3601x.c line 427

Quoted 10 lines
drivers/leds/leds-lm3601x.c new file +9 -0
+       fwnode_handle_put(child);
+       return ret;
+}
+
+static int lm3601x_probe(struct i2c_client *client,
+                       const struct i2c_device_id *id)
+{
+       struct lm3601x_led *led;
 
+       int err;

Be consistent, either err everywhere, or ret.

drivers/leds/leds-lm3601x.c line 436

Quoted 10 lines
drivers/leds/leds-lm3601x.c new file +9 -0
+
+       led = devm_kzalloc(&client->dev, sizeof(*led), GFP_KERNEL);
+       if (!led)
+               return -ENOMEM;
+
+       led->client = client;
+       i2c_set_clientdata(client, led);
+
 
+       err = lm3601x_parse_node(led, client->dev.of_node);

Can't you use dev_fwnode() helper?
It seems it's even not used inside the function.

Quoted 25 lines
drivers/leds/leds-lm3601x.c new file +25 -0
+       if (err < 0)
+               return -ENODEV;
+
+       led->regmap = devm_regmap_init_i2c(client, &lm3601x_regmap);
+       if (IS_ERR(led->regmap)) {
+               err = PTR_ERR(led->regmap);
+               dev_err(&client->dev,
+                       "Failed to allocate register map: %d\n", err);
+               return err;
+       }
+
+       mutex_init(&led->lock);
+
+       return lm3601x_register_leds(led);
+}
+
+static int lm3601x_remove(struct i2c_client *client)
+{
+       struct lm3601x_led *led = i2c_get_clientdata(client);
+
+       led_classdev_flash_unregister(&led->fled_cdev);
+       mutex_destroy(&led->lock);
+
+       return regmap_update_bits(led->regmap, LM3601X_ENABLE_REG,
+                          LM3601X_ENABLE_MASK,

drivers/leds/leds-lm3601x.c line 470

Quoted 10 lines
drivers/leds/leds-lm3601x.c new file +9 -0
+                          LM3601X_MODE_STANDBY);
+}
+
 
+static const struct i2c_device_id lm3601x_id[] = {
+       { "LM36010", CHIP_LM36010 },
+       { "LM36011", CHIP_LM36011 },
+       { }
+};
+MODULE_DEVICE_TABLE(i2c, lm3601x_id);

Are you going to use it as a pure i2c driver? If yes, I would like to hear why. Otherwise just switch to ->probe_new().

Quoted 25 lines
drivers/leds/leds-lm3601x.c new file +22 -1
+
+static const struct of_device_id of_lm3601x_leds_match[] = {
+       { .compatible = "ti,lm36010", },
+       { .compatible = "ti,lm36011", },
+       { }
+};
+MODULE_DEVICE_TABLE(of, of_lm3601x_leds_match);
+
+static struct i2c_driver lm3601x_i2c_driver = {
+       .driver = {
+               .name = "lm3601x",
+               .of_match_table = of_lm3601x_leds_match,
+       },
+       .probe = lm3601x_probe,
+       .remove = lm3601x_remove,
+       .id_table = lm3601x_id,
+};
+module_i2c_driver(lm3601x_i2c_driver);
+
+MODULE_DESCRIPTION("Texas Instruments Flash Lighting driver for LM3601X");
+MODULE_AUTHOR("Dan Murphy <[email protected]>");
+MODULE_LICENSE("GPL v2");
--

2.17.0.582.gccdcbd54c

Signature · 2 lines
With Best Regards,
Andy Shevchenko
author
#3 lore raw

Re: [PATCH v8 2/2] leds: lm3601x: Introduce the lm3601x LED driver

Quoted 214 lines · Andy Shevchenko
Quoted 212 lines · Dan Murphy

Introduce the family of LED devices that can
drive a torch, strobe or IR LED.

The LED driver can be configured with a strobe
timer to execute a strobe flash. The IR LED
brightness is controlled via the torch brightness
register.

The data sheet for each the LM36010 and LM36011
LED drivers can be found here:
http://www.ti.com/product/LM36010
http://www.ti.com/product/LM36011

---

v8 - Removed OF Kconfig dependency, change strobe to flash, updated label generation,
fixed brightness calculation, added mutex_destroy and flash_unregister - https://patchwork.kernel.org/patch/10416163/

v7 - Numerous fixes to many to list. Highlights are moved from OF APIs to device_property APIs, updated LED registration, timeout to reg algorithim, and fixed label generation -
https://patchwork.kernel.org/patch/10401437/
v6 - This driver has been heavily modified from v5. There is no longer reading
of individual child nodes. There are too many changes to list here see -
https://patchwork.kernel.org/patch/10392123/
v5 - Fixed magic numbers, change reg cache type, added of_put_node to release
the dt node ref, and I did not change the remove function to leave the LED in its
state on driver removal - https://patchwork.kernel.org/patch/10391741/
v4 - Fixed Cocci issue using ARRAY_SIZE - https://patchwork.kernel.org/patch/10389259/
v3 - removed wildcard dt compatible, fixed copyright, fixed struct doc, removed
RO registers from default, added regmap volatile for FLAGS_REG, updated regmap cache type, fixed unlock and extra semi colon in strobe_set, removed unnecessary out label
in led register and fixed checking of the ret in brightness_set - https://patchwork.kernel.org/patch/10386243/
v2 - Fixed kbuild issue and removed unused cdev_strobe - https://patchwork.kernel.org/patch/10384585/

 drivers/leds/Kconfig        |   9 +
 drivers/leds/Makefile       |   1 +
 drivers/leds/leds-lm3601x.c | 492 ++++++++++++++++++++++++++++++++++++
 3 files changed, 502 insertions(+)
 create mode 100644 drivers/leds/leds-lm3601x.c
drivers/leds/Kconfig +9 -0
index 2c896c0e69e1..d95d436e6089 100644
@@ -145,6 +145,15 @@ config LEDS_LM3692X
          This option enables support for the TI LM3692x family
          of white LED string drivers used for backlighting.
 
+config LEDS_LM3601X
+       tristate "LED support for LM3601x Chips"
+       depends on LEDS_CLASS && I2C
+       depends on LEDS_CLASS_FLASH
+       select REGMAP_I2C
+       help
+         This option enables support for the TI LM3601x family
+         of flash, torch and indicator classes.
+
 config LEDS_LOCOMO
        tristate "LED Support for Locomo device"
        depends on LEDS_CLASS
drivers/leds/Makefile +1 -0
index 91eca81cae82..b79807fe1b67 100644
@@ -76,6 +76,7 @@ obj-$(CONFIG_LEDS_MLXREG)             += leds-mlxreg.o
 obj-$(CONFIG_LEDS_NIC78BX)             += leds-nic78bx.o
 obj-$(CONFIG_LEDS_MT6323)              += leds-mt6323.o
 obj-$(CONFIG_LEDS_LM3692X)             += leds-lm3692x.o
+obj-$(CONFIG_LEDS_LM3601X)             += leds-lm3601x.o
 
 # LED SPI Drivers
 obj-$(CONFIG_LEDS_DAC124S085)          += leds-dac124s085.o
drivers/leds/leds-lm3601x.c new file +132 -0
new file mode 100644
index 000000000000..b1f0ede704c1
@@ -0,0 +1,492 @@
+// SPDX-License-Identifier: GPL-2.0
+// Flash and torch driver for Texas Instruments LM3601X LED
+// Flash driver chip family
+// Copyright (C) 2018 Texas Instruments Incorporated - http://www.ti.com/
+
+#include <linux/delay.h>
+#include <linux/i2c.h>
+#include <linux/leds.h>
+#include <linux/led-class-flash.h>
+#include <linux/module.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+#include <uapi/linux/uleds.h>
+
+#define LM3601X_LED_IR         0x0
+#define LM3601X_LED_TORCH      0x1
+
+/* Registers */
+#define LM3601X_ENABLE_REG     0x01
+#define LM3601X_CFG_REG                0x02
+#define LM3601X_LED_FLASH_REG  0x03
+#define LM3601X_LED_TORCH_REG  0x04
+#define LM3601X_FLAGS_REG      0x05
+#define LM3601X_DEV_ID_REG     0x06
+
+#define LM3601X_SW_RESET       BIT(7)
+
+/* Enable Mode bits */
+#define LM3601X_MODE_STANDBY   0x00
+#define LM3601X_MODE_IR_DRV    BIT(0)
+#define LM3601X_MODE_TORCH     BIT(1)
+#define LM3601X_MODE_STROBE    (BIT(0) | BIT(1))
+#define LM3601X_STRB_EN                BIT(2)
+#define LM3601X_STRB_EDGE_TRIG BIT(3)
+#define LM3601X_IVFM_EN                BIT(4)
+
+#define LM36010_BOOST_LIMIT_28 BIT(5)
+#define LM36010_BOOST_FREQ_4MHZ        BIT(6)
+#define LM36010_BOOST_MODE_PASS        BIT(7)
+
+/* Flag Mask */
+#define LM3601X_FLASH_TIME_OUT BIT(0)
+#define LM3601X_UVLO_FAULT     BIT(1)
+#define LM3601X_THERM_SHUTDOWN BIT(2)
+#define LM3601X_THERM_CURR     BIT(3)
+#define LM36010_CURR_LIMIT     BIT(4)
+#define LM3601X_SHORT_FAULT    BIT(5)
+#define LM3601X_IVFM_TRIP      BIT(6)
+#define LM36010_OVP_FAULT      BIT(7)
+
+#define LM3601X_MAX_TORCH_I_UA 376000
+#define LM3601X_MIN_TORCH_I_UA 2400
+#define LM3601X_TORCH_REG_DIV  2965
+
+#define LM3601X_MAX_STROBE_I_UA        1500000
+#define LM3601X_MIN_STROBE_I_UA        11000
+#define LM3601X_STROBE_REG_DIV 11800
+
+#define LM3601X_TIMEOUT_MASK   0x1e
+#define LM3601X_ENABLE_MASK    (LM3601X_MODE_IR_DRV | LM3601X_MODE_TORCH)
+
+#define LM3601X_LOWER_STEP_US  40000
+#define LM3601X_UPPER_STEP_US  200000
+#define LM3601X_MIN_TIMEOUT_US 40000
+#define LM3601X_MAX_TIMEOUT_US 1600000
+#define LM3601X_TIMEOUT_XOVER_US 400000
+
+enum lm3601x_type {
+       CHIP_LM36010 = 0,
+       CHIP_LM36011,
+};
+
+/**
+ * struct lm3601x_led -
+ * @fled_cdev: flash LED class device pointer
+ * @client: Pointer to the I2C client
+ * @regmap: Devices register map
+ * @lock: Lock for reading/writing the device
+ * @led_name: LED label for the Torch or IR LED
+ * @flash_timeout: the timeout for the flash
+ * @last_flag: last known flags register value
+ * @torch_current_max: maximum current for the torch
+ * @flash_current_max: maximum current for the flash
+ * @max_flash_timeout: maximum timeout for the flash
+ * @led_mode: The mode to enable either IR or Torch
+ */
+struct lm3601x_led {
+       struct led_classdev_flash fled_cdev;
+       struct i2c_client *client;
+       struct regmap *regmap;
+       struct mutex lock;
+
+       char led_name[LED_MAX_NAME_SIZE];
+
+       unsigned int flash_timeout;
+       unsigned int last_flag;
+
+       u32 torch_current_max;
+       u32 flash_current_max;
+       u32 max_flash_timeout;
+
+       u32 led_mode;
+};
+
+static const struct reg_default lm3601x_regmap_defs[] = {
+       { LM3601X_ENABLE_REG, 0x20 },
+       { LM3601X_CFG_REG, 0x15 },
+       { LM3601X_LED_FLASH_REG, 0x00 },
+       { LM3601X_LED_TORCH_REG, 0x00 },
+};
+
+static bool lm3601x_volatile_reg(struct device *dev, unsigned int reg)
+{
+       switch (reg) {
+       case LM3601X_FLAGS_REG:
+               return true;
+       default:
+               return false;
+       }
+}
+
+static const struct regmap_config lm3601x_regmap = {
+       .reg_bits = 8,
+       .val_bits = 8,
+
+       .max_register = LM3601X_DEV_ID_REG,
+       .reg_defaults = lm3601x_regmap_defs,
+       .num_reg_defaults = ARRAY_SIZE(lm3601x_regmap_defs),
+       .cache_type = REGCACHE_RBTREE,
+       .volatile_reg = lm3601x_volatile_reg,
+};
+
Quoted 4 lines

drivers/leds/leds-lm3601x.c line 134

Quoted 2 lines
drivers/leds/leds-lm3601x.c new file +2 -0
+static struct lm3601x_led *fled_cdev_to_led(
+                               struct led_classdev_flash *fled_cdev)

Didn't notice before. This will look much better in one line.

Gives LTL warning.

Quoted 81 lines
Quoted 80 lines
drivers/leds/leds-lm3601x.c new file +79 -0
+{
+       return container_of(fled_cdev, struct lm3601x_led, fled_cdev);
+}
+
+static int lm3601x_read_faults(struct lm3601x_led *led)
+{
+       int flags_val;
+       int ret;
+
+       ret = regmap_read(led->regmap, LM3601X_FLAGS_REG, &flags_val);
+       if (ret < 0)
+               return -EIO;
+
+       led->last_flag = 0;
+
+       if (flags_val & LM36010_OVP_FAULT)
+               led->last_flag |= LED_FAULT_OVER_VOLTAGE;
+
+       if (flags_val & (LM3601X_THERM_SHUTDOWN | LM3601X_THERM_CURR))
+               led->last_flag |= LED_FAULT_OVER_TEMPERATURE;
+
+       if (flags_val & LM3601X_SHORT_FAULT)
+               led->last_flag |= LED_FAULT_SHORT_CIRCUIT;
+
+       if (flags_val & LM36010_CURR_LIMIT)
+               led->last_flag |= LED_FAULT_OVER_CURRENT;
+
+       if (flags_val & LM3601X_UVLO_FAULT)
+               led->last_flag |= LED_FAULT_UNDER_VOLTAGE;
+
+       if (flags_val & LM3601X_IVFM_TRIP)
+               led->last_flag |= LED_FAULT_INPUT_VOLTAGE;
+
+       if (flags_val & LM3601X_THERM_SHUTDOWN)
+               led->last_flag |= LED_FAULT_LED_OVER_TEMPERATURE;
+
+       return led->last_flag;
+}
+
+static int lm3601x_brightness_set(struct led_classdev *cdev,
+                                       enum led_brightness brightness)
+{
+       struct led_classdev_flash *fled_cdev = lcdev_to_flcdev(cdev);
+       struct lm3601x_led *led = fled_cdev_to_led(fled_cdev);
+       int ret, led_mode_val;
+
+       mutex_lock(&led->lock);
+
+       ret = lm3601x_read_faults(led);
+       if (ret < 0)
+               goto out;
+
+       if (led->led_mode == LM3601X_LED_TORCH)
+               led_mode_val = LM3601X_MODE_TORCH;
+       else
+               led_mode_val = LM3601X_MODE_IR_DRV;
+
+       if (brightness == LED_OFF) {
+               ret = regmap_update_bits(led->regmap, LM3601X_ENABLE_REG,
+                                       led_mode_val, LED_OFF);
+               goto out;
+       }
+
+       ret = regmap_write(led->regmap, LM3601X_LED_TORCH_REG, brightness);
+       if (ret < 0)
+               goto out;
+
+       ret = regmap_update_bits(led->regmap, LM3601X_ENABLE_REG,
+                               LM3601X_MODE_TORCH | LM3601X_MODE_IR_DRV,
+                               led_mode_val);
+out:
+       mutex_unlock(&led->lock);
+       return ret;
+}
+
+static int lm3601x_flash_set(struct led_classdev_flash *fled_cdev,
+                               bool state)
+{
+       struct lm3601x_led *led = fled_cdev_to_led(fled_cdev);
Quoted 3 lines

drivers/leds/leds-lm3601x.c line 214

Quoted 1 line
drivers/leds/leds-lm3601x.c new file +1 -0
+       int timeout_reg_val = 0;

Redundant assignment.

OK

Quoted 38 lines
Quoted 37 lines
drivers/leds/leds-lm3601x.c new file +36 -0
+       int current_timeout;
+       int ret;
+
+       mutex_lock(&led->lock);
+
+       ret = regmap_read(led->regmap, LM3601X_CFG_REG, &current_timeout);
+       if (ret < 0)
+               goto out;
+
+       if (led->flash_timeout >= LM3601X_TIMEOUT_XOVER_US)
+               timeout_reg_val = led->flash_timeout / LM3601X_UPPER_STEP_US + 0x07;
+       else
+               timeout_reg_val = led->flash_timeout / LM3601X_LOWER_STEP_US - 0x01;
+
+       if (led->flash_timeout != current_timeout)
+               ret = regmap_update_bits(led->regmap, LM3601X_CFG_REG,
+                                       LM3601X_TIMEOUT_MASK, timeout_reg_val);
+
+       if (state)
+               ret = regmap_update_bits(led->regmap, LM3601X_ENABLE_REG,
+                                       LM3601X_MODE_TORCH | LM3601X_MODE_IR_DRV,
+                                       LM3601X_MODE_STROBE);
+       else
+               ret = regmap_update_bits(led->regmap, LM3601X_ENABLE_REG,
+                                       LM3601X_MODE_STROBE, LED_OFF);
+
+       ret = lm3601x_read_faults(led);
+out:
+       mutex_unlock(&led->lock);
+       return ret;
+}
+
+static int lm3601x_flash_brightness_set(struct led_classdev_flash *fled_cdev,
+                                       u32 brightness)
+{
+       struct lm3601x_led *led = fled_cdev_to_led(fled_cdev);
Quoted 4 lines

drivers/leds/leds-lm3601x.c line 252

Quoted 2 lines
drivers/leds/leds-lm3601x.c new file +2 -0
+       int ret;
+       u8 brightness_val;

Better to read reversed xmas tree order.

ok

Quoted 26 lines
Quoted 25 lines
drivers/leds/leds-lm3601x.c new file +24 -0
+
+       mutex_lock(&led->lock);
+       ret = lm3601x_read_faults(led);
+       if (ret < 0)
+               goto out;
+
+       if (brightness == LED_OFF) {
+               ret = regmap_update_bits(led->regmap, LM3601X_ENABLE_REG,
+                                       LM3601X_MODE_STROBE, LED_OFF);
+               goto out;
+       }
+
+       brightness_val = brightness / LM3601X_STROBE_REG_DIV;
+
+       ret = regmap_write(led->regmap, LM3601X_LED_FLASH_REG, brightness_val);
+out:
+       mutex_unlock(&led->lock);
+       return ret;
+}
+
+static int lm3601x_flash_timeout_set(struct led_classdev_flash *fled_cdev,
+                               u32 timeout)
+{
+       struct lm3601x_led *led = fled_cdev_to_led(fled_cdev);
Quoted 3 lines

drivers/leds/leds-lm3601x.c line 277

Quoted 1 line
drivers/leds/leds-lm3601x.c new file +1 -0
+       int ret = 0;

Redundant variable.

Removed

Quoted 82 lines
Quoted 81 lines
drivers/leds/leds-lm3601x.c new file +80 -0
+
+       mutex_lock(&led->lock);
+
+       led->flash_timeout = timeout;
+
+       mutex_unlock(&led->lock);
+
+       return ret;
+}
+
+static int lm3601x_flash_get(struct led_classdev_flash *fled_cdev,
+                               bool *state)
+{
+       struct lm3601x_led *led = fled_cdev_to_led(fled_cdev);
+       int ret;
+       int flash_state;
+
+       mutex_lock(&led->lock);
+
+       ret = regmap_read(led->regmap, LM3601X_ENABLE_REG, &flash_state);
+       if (ret < 0)
+               goto out;
+
+       *state = flash_state & LM3601X_MODE_STROBE;
+
+out:
+       mutex_unlock(&led->lock);
+       return ret;
+}
+
+static int lm3601x_flash_fault_get(struct led_classdev_flash *fled_cdev,
+                               u32 *fault)
+{
+       struct lm3601x_led *led = fled_cdev_to_led(fled_cdev);
+
+       lm3601x_read_faults(led);
+
+       *fault = led->last_flag;
+
+       return 0;
+}
+
+static const struct led_flash_ops flash_ops = {
+       .flash_brightness_set   = lm3601x_flash_brightness_set,
+       .strobe_set             = lm3601x_flash_set,
+       .strobe_get             = lm3601x_flash_get,
+       .timeout_set            = lm3601x_flash_timeout_set,
+       .fault_get              = lm3601x_flash_fault_get,
+};
+
+static int lm3601x_register_leds(struct lm3601x_led *led)
+{
+       struct led_classdev *led_cdev;
+       struct led_flash_setting *setting;
+
+       led->fled_cdev.ops = &flash_ops;
+
+       setting = &led->fled_cdev.timeout;
+       setting->min = LM3601X_MIN_TIMEOUT_US;
+       setting->max = led->max_flash_timeout;
+       setting->step = LM3601X_LOWER_STEP_US;
+       setting->val = led->max_flash_timeout;
+
+       setting = &led->fled_cdev.brightness;
+       setting->min = LM3601X_MIN_STROBE_I_UA;
+       setting->max = led->flash_current_max;
+       setting->step = LM3601X_TORCH_REG_DIV;
+       setting->val = led->flash_current_max;
+
+       led_cdev = &led->fled_cdev.led_cdev;
+       led_cdev->name = led->led_name;
+       led_cdev->brightness_set_blocking = lm3601x_brightness_set;
+       led_cdev->max_brightness = DIV_ROUND_UP(led->torch_current_max,
+                                               LM3601X_TORCH_REG_DIV);
+       led_cdev->flags |= LED_DEV_CAP_FLASH;
+
+       return led_classdev_flash_register(&led->client->dev, &led->fled_cdev);
+}
+
+static int lm3601x_parse_node(struct lm3601x_led *led,
Quoted 3 lines

drivers/leds/leds-lm3601x.c line 358

Quoted 1 line
drivers/leds/leds-lm3601x.c new file +1 -0
+                             struct device_node *node)

I don't see how it's used.

Removed

Quoted 39 lines
Quoted 38 lines
drivers/leds/leds-lm3601x.c new file +37 -0
+{
+       struct fwnode_handle *child = NULL;
+       int ret = -ENODEV;
+       const char *name;
+
+       child = device_get_next_child_node(&led->client->dev, child);
+       if (!child) {
+               dev_err(&led->client->dev, "No LED Child node\n");
+               return ret;
+       }
+
+       ret = fwnode_property_read_u32(child, "reg", &led->led_mode);
+       if (ret) {
+               dev_err(&led->client->dev, "reg DT property missing\n");
+               goto out_err;
+       }
+
+       if (led->led_mode > LM3601X_LED_TORCH ||
+           led->led_mode < LM3601X_LED_IR) {
+               dev_warn(&led->client->dev, "Invalid led mode requested\n");
+               ret = -EINVAL;
+               goto out_err;
+       }
+
+       ret = fwnode_property_read_string(child, "label", &name);
+       if (ret) {
+               if (led->led_mode == LM3601X_LED_TORCH)
+                       name = "torch";
+               else
+                       name = "infrared";
+       }
+
+       snprintf(led->led_name, sizeof(led->led_name),
+               "%s:%s", led->client->name, name);
+
+       ret = fwnode_property_read_u32(child, "led-max-microamp",
+                                       &led->torch_current_max);
Quoted 3 lines

drivers/leds/leds-lm3601x.c line 396

Quoted 1 line
drivers/leds/leds-lm3601x.c new file +1 -0
+       if (ret < 0) {

Be consistent with above or other way around.

Fixed

Quoted 32 lines
Quoted 31 lines
drivers/leds/leds-lm3601x.c new file +30 -0
+               dev_warn(&led->client->dev,
+                       "led-max-microamp DT property missing\n");
+               goto out_err;
+       }
+
+       ret = fwnode_property_read_u32(child, "flash-max-microamp",
+                               &led->flash_current_max);
+       if (ret < 0) {
+               dev_warn(&led->client->dev,
+                        "flash-max-microamp DT property missing\n");
+               goto out_err;
+       }
+
+       ret = fwnode_property_read_u32(child, "flash-max-timeout-us",
+                               &led->max_flash_timeout);
+       if (ret < 0) {
+               dev_warn(&led->client->dev,
+                        "flash-max-timeout-us DT property missing\n");
+               goto out_err;
+       }
+
+out_err:
+       fwnode_handle_put(child);
+       return ret;
+}
+
+static int lm3601x_probe(struct i2c_client *client,
+                       const struct i2c_device_id *id)
+{
+       struct lm3601x_led *led;
Quoted 3 lines

drivers/leds/leds-lm3601x.c line 427

Quoted 1 line
drivers/leds/leds-lm3601x.c new file +1 -0
+       int err;

Be consistent, either err everywhere, or ret.

Seems pedantic but I will change it

Quoted 10 lines
Quoted 9 lines
drivers/leds/leds-lm3601x.c new file +8 -0
+
+       led = devm_kzalloc(&client->dev, sizeof(*led), GFP_KERNEL);
+       if (!led)
+               return -ENOMEM;
+
+       led->client = client;
+       i2c_set_clientdata(client, led);
+
Quoted 4 lines

drivers/leds/leds-lm3601x.c line 436

Quoted 1 line
drivers/leds/leds-lm3601x.c new file +1 -0
+       err = lm3601x_parse_node(led, client->dev.of_node);

Can't you use dev_fwnode() helper?
It seems it's even not used inside the function.

Dropping of_node anyway it is unused

Quoted 30 lines
Quoted 29 lines
drivers/leds/leds-lm3601x.c new file +28 -0
+       if (err < 0)
+               return -ENODEV;
+
+       led->regmap = devm_regmap_init_i2c(client, &lm3601x_regmap);
+       if (IS_ERR(led->regmap)) {
+               err = PTR_ERR(led->regmap);
+               dev_err(&client->dev,
+                       "Failed to allocate register map: %d\n", err);
+               return err;
+       }
+
+       mutex_init(&led->lock);
+
+       return lm3601x_register_leds(led);
+}
+
+static int lm3601x_remove(struct i2c_client *client)
+{
+       struct lm3601x_led *led = i2c_get_clientdata(client);
+
+       led_classdev_flash_unregister(&led->fled_cdev);
+       mutex_destroy(&led->lock);
+
+       return regmap_update_bits(led->regmap, LM3601X_ENABLE_REG,
+                          LM3601X_ENABLE_MASK,
+                          LM3601X_MODE_STANDBY);
+}
+
Quoted 9 lines

drivers/leds/leds-lm3601x.c line 470

Quoted 6 lines
drivers/leds/leds-lm3601x.c new file +6 -0
+static const struct i2c_device_id lm3601x_id[] = {
+       { "LM36010", CHIP_LM36010 },
+       { "LM36011", CHIP_LM36011 },
+       { }
+};
+MODULE_DEVICE_TABLE(i2c, lm3601x_id);

Are you going to use it as a pure i2c driver? If yes, I would like to hear why. Otherwise just switch to ->probe_new().

I was going to use the id variable but with code changes I don't use it anymore so I can convert the driver.

Dan

Quoted 29 lines
Quoted 26 lines
drivers/leds/leds-lm3601x.c new file +22 -1
+
+static const struct of_device_id of_lm3601x_leds_match[] = {
+       { .compatible = "ti,lm36010", },
+       { .compatible = "ti,lm36011", },
+       { }
+};
+MODULE_DEVICE_TABLE(of, of_lm3601x_leds_match);
+
+static struct i2c_driver lm3601x_i2c_driver = {
+       .driver = {
+               .name = "lm3601x",
+               .of_match_table = of_lm3601x_leds_match,
+       },
+       .probe = lm3601x_probe,
+       .remove = lm3601x_remove,
+       .id_table = lm3601x_id,
+};
+module_i2c_driver(lm3601x_i2c_driver);
+
+MODULE_DESCRIPTION("Texas Instruments Flash Lighting driver for LM3601X");
+MODULE_AUTHOR("Dan Murphy <[email protected]>");
+MODULE_LICENSE("GPL v2");
--

2.17.0.582.gccdcbd54c

Signature · 2 lines
------------------
Dan Murphy
Reviewed-by
#4 lore raw

Re: [PATCH v8 2/2] leds: lm3601x: Introduce the lm3601x LED driver

Quoted 10 lines · Dan Murphy
Quoted 7 lines · Andy Shevchenko

drivers/leds/leds-lm3601x.c line 134

Quoted 2 lines · Dan Murphy
drivers/leds/leds-lm3601x.c new file +2 -0
+static struct lm3601x_led *fled_cdev_to_led(
+                               struct led_classdev_flash *fled_cdev)

Didn't notice before. This will look much better in one line.

Gives LTL warning.

I wouldn't really care about it.
But I leave to Jacek to decide.

After addressing the rest, FWIW,

Signature · 2 lines
With Best Regards,
Andy Shevchenko
#5 lore raw

Re: [PATCH v8 2/2] leds: lm3601x: Introduce the lm3601x LED driver

Quoted 8 lines · Andy Shevchenko
Quoted 7 lines · Dan Murphy
Quoted 6 lines · Andy Shevchenko
Quoted 2 lines · Dan Murphy
drivers/leds/leds-lm3601x.c new file +2 -0
+static struct lm3601x_led *fled_cdev_to_led(
+                               struct led_classdev_flash *fled_cdev)
Quoted 6 lines
Quoted 3 lines
Quoted 1 line

Didn't notice before. This will look much better in one line.

Gives LTL warning.

I wouldn't really care about it.
But I leave to Jacek to decide.

Please make it one line.

It is even Linus' recommendation to not strictly stick to the 80 character limit as we all have modern computers nowadays.

Quoted 4 lines

After addressing the rest, FWIW,

Signature · 2 lines
Best regards,
Jacek Anaszewski
#6 lore raw

Re: [PATCH v8 2/2] leds: lm3601x: Introduce the lm3601x LED driver

In reply to Dan Murphy

Hi Dan,

In three cases we should have "strobe" instead of "flash" Please refer to the code below.

Otherwise it looks good to me - you even fixed some earlier unnoticed issues.

Quoted 363 lines · Dan Murphy

Introduce the family of LED devices that can
drive a torch, strobe or IR LED.

The LED driver can be configured with a strobe
timer to execute a strobe flash. The IR LED
brightness is controlled via the torch brightness
register.

The data sheet for each the LM36010 and LM36011
LED drivers can be found here:
http://www.ti.com/product/LM36010
http://www.ti.com/product/LM36011

---

v8 - Removed OF Kconfig dependency, change strobe to flash, updated label generation,
fixed brightness calculation, added mutex_destroy and flash_unregister - https://patchwork.kernel.org/patch/10416163/

v7 - Numerous fixes to many to list. Highlights are moved from OF APIs to device_property APIs, updated LED registration, timeout to reg algorithim, and fixed label generation -
https://patchwork.kernel.org/patch/10401437/
v6 - This driver has been heavily modified from v5. There is no longer reading
of individual child nodes. There are too many changes to list here see -
https://patchwork.kernel.org/patch/10392123/
v5 - Fixed magic numbers, change reg cache type, added of_put_node to release
the dt node ref, and I did not change the remove function to leave the LED in its
state on driver removal - https://patchwork.kernel.org/patch/10391741/
v4 - Fixed Cocci issue using ARRAY_SIZE - https://patchwork.kernel.org/patch/10389259/
v3 - removed wildcard dt compatible, fixed copyright, fixed struct doc, removed
RO registers from default, added regmap volatile for FLAGS_REG, updated regmap cache type, fixed unlock and extra semi colon in strobe_set, removed unnecessary out label
in led register and fixed checking of the ret in brightness_set - https://patchwork.kernel.org/patch/10386243/
v2 - Fixed kbuild issue and removed unused cdev_strobe - https://patchwork.kernel.org/patch/10384585/

  drivers/leds/Kconfig        |   9 +
  drivers/leds/Makefile       |   1 +
  drivers/leds/leds-lm3601x.c | 492 ++++++++++++++++++++++++++++++++++++
  3 files changed, 502 insertions(+)

create mode 100644 drivers/leds/leds-lm3601x.c

drivers/leds/Kconfig +9 -0
index 2c896c0e69e1..d95d436e6089 100644
@@ -145,6 +145,15 @@ config LEDS_LM3692X
  	  This option enables support for the TI LM3692x family
  	  of white LED string drivers used for backlighting.
 
+config LEDS_LM3601X
+	tristate "LED support for LM3601x Chips"
+	depends on LEDS_CLASS && I2C
+	depends on LEDS_CLASS_FLASH
+	select REGMAP_I2C
+	help
+	  This option enables support for the TI LM3601x family
+	  of flash, torch and indicator classes.
+
  config LEDS_LOCOMO
  	tristate "LED Support for Locomo device"
  	depends on LEDS_CLASS
drivers/leds/Makefile +1 -0
index 91eca81cae82..b79807fe1b67 100644
@@ -76,6 +76,7 @@ obj-$(CONFIG_LEDS_MLXREG)		+= leds-mlxreg.o
  obj-$(CONFIG_LEDS_NIC78BX)		+= leds-nic78bx.o
  obj-$(CONFIG_LEDS_MT6323)		+= leds-mt6323.o
  obj-$(CONFIG_LEDS_LM3692X)		+= leds-lm3692x.o
+obj-$(CONFIG_LEDS_LM3601X)		+= leds-lm3601x.o
 
  # LED SPI Drivers
  obj-$(CONFIG_LEDS_DAC124S085)		+= leds-dac124s085.o
drivers/leds/leds-lm3601x.c new file +283 -0
new file mode 100644
index 000000000000..b1f0ede704c1
@@ -0,0 +1,492 @@
+// SPDX-License-Identifier: GPL-2.0
+// Flash and torch driver for Texas Instruments LM3601X LED
+// Flash driver chip family
+// Copyright (C) 2018 Texas Instruments Incorporated - http://www.ti.com/
+
+#include <linux/delay.h>
+#include <linux/i2c.h>
+#include <linux/leds.h>
+#include <linux/led-class-flash.h>
+#include <linux/module.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+#include <uapi/linux/uleds.h>
+
+#define LM3601X_LED_IR		0x0
+#define LM3601X_LED_TORCH	0x1
+
+/* Registers */
+#define LM3601X_ENABLE_REG	0x01
+#define LM3601X_CFG_REG		0x02
+#define LM3601X_LED_FLASH_REG	0x03
+#define LM3601X_LED_TORCH_REG	0x04
+#define LM3601X_FLAGS_REG	0x05
+#define LM3601X_DEV_ID_REG	0x06
+
+#define LM3601X_SW_RESET	BIT(7)
+
+/* Enable Mode bits */
+#define LM3601X_MODE_STANDBY	0x00
+#define LM3601X_MODE_IR_DRV	BIT(0)
+#define LM3601X_MODE_TORCH	BIT(1)
+#define LM3601X_MODE_STROBE	(BIT(0) | BIT(1))
+#define LM3601X_STRB_EN		BIT(2)
+#define LM3601X_STRB_EDGE_TRIG	BIT(3)
+#define LM3601X_IVFM_EN		BIT(4)
+
+#define LM36010_BOOST_LIMIT_28	BIT(5)
+#define LM36010_BOOST_FREQ_4MHZ	BIT(6)
+#define LM36010_BOOST_MODE_PASS	BIT(7)
+
+/* Flag Mask */
+#define LM3601X_FLASH_TIME_OUT	BIT(0)
+#define LM3601X_UVLO_FAULT	BIT(1)
+#define LM3601X_THERM_SHUTDOWN	BIT(2)
+#define LM3601X_THERM_CURR	BIT(3)
+#define LM36010_CURR_LIMIT	BIT(4)
+#define LM3601X_SHORT_FAULT	BIT(5)
+#define LM3601X_IVFM_TRIP	BIT(6)
+#define LM36010_OVP_FAULT	BIT(7)
+
+#define LM3601X_MAX_TORCH_I_UA	376000
+#define LM3601X_MIN_TORCH_I_UA	2400
+#define LM3601X_TORCH_REG_DIV	2965
+
+#define LM3601X_MAX_STROBE_I_UA	1500000
+#define LM3601X_MIN_STROBE_I_UA	11000
+#define LM3601X_STROBE_REG_DIV	11800
+
+#define LM3601X_TIMEOUT_MASK	0x1e
+#define LM3601X_ENABLE_MASK	(LM3601X_MODE_IR_DRV | LM3601X_MODE_TORCH)
+
+#define LM3601X_LOWER_STEP_US	40000
+#define LM3601X_UPPER_STEP_US	200000
+#define LM3601X_MIN_TIMEOUT_US	40000
+#define LM3601X_MAX_TIMEOUT_US	1600000
+#define LM3601X_TIMEOUT_XOVER_US 400000
+
+enum lm3601x_type {
+	CHIP_LM36010 = 0,
+	CHIP_LM36011,
+};
+
+/**
+ * struct lm3601x_led -
+ * @fled_cdev: flash LED class device pointer
+ * @client: Pointer to the I2C client
+ * @regmap: Devices register map
+ * @lock: Lock for reading/writing the device
+ * @led_name: LED label for the Torch or IR LED
+ * @flash_timeout: the timeout for the flash
+ * @last_flag: last known flags register value
+ * @torch_current_max: maximum current for the torch
+ * @flash_current_max: maximum current for the flash
+ * @max_flash_timeout: maximum timeout for the flash
+ * @led_mode: The mode to enable either IR or Torch
+ */
+struct lm3601x_led {
+	struct led_classdev_flash fled_cdev;
+	struct i2c_client *client;
+	struct regmap *regmap;
+	struct mutex lock;
+
+	char led_name[LED_MAX_NAME_SIZE];
+
+	unsigned int flash_timeout;
+	unsigned int last_flag;
+
+	u32 torch_current_max;
+	u32 flash_current_max;
+	u32 max_flash_timeout;
+
+	u32 led_mode;
+};
+
+static const struct reg_default lm3601x_regmap_defs[] = {
+	{ LM3601X_ENABLE_REG, 0x20 },
+	{ LM3601X_CFG_REG, 0x15 },
+	{ LM3601X_LED_FLASH_REG, 0x00 },
+	{ LM3601X_LED_TORCH_REG, 0x00 },
+};
+
+static bool lm3601x_volatile_reg(struct device *dev, unsigned int reg)
+{
+	switch (reg) {
+	case LM3601X_FLAGS_REG:
+		return true;
+	default:
+		return false;
+	}
+}
+
+static const struct regmap_config lm3601x_regmap = {
+	.reg_bits = 8,
+	.val_bits = 8,
+
+	.max_register = LM3601X_DEV_ID_REG,
+	.reg_defaults = lm3601x_regmap_defs,
+	.num_reg_defaults = ARRAY_SIZE(lm3601x_regmap_defs),
+	.cache_type = REGCACHE_RBTREE,
+	.volatile_reg = lm3601x_volatile_reg,
+};
+
+static struct lm3601x_led *fled_cdev_to_led(
+				struct led_classdev_flash *fled_cdev)
+{
+	return container_of(fled_cdev, struct lm3601x_led, fled_cdev);
+}
+
+static int lm3601x_read_faults(struct lm3601x_led *led)
+{
+	int flags_val;
+	int ret;
+
+	ret = regmap_read(led->regmap, LM3601X_FLAGS_REG, &flags_val);
+	if (ret < 0)
+		return -EIO;
+
+	led->last_flag = 0;
+
+	if (flags_val & LM36010_OVP_FAULT)
+		led->last_flag |= LED_FAULT_OVER_VOLTAGE;
+
+	if (flags_val & (LM3601X_THERM_SHUTDOWN | LM3601X_THERM_CURR))
+		led->last_flag |= LED_FAULT_OVER_TEMPERATURE;
+
+	if (flags_val & LM3601X_SHORT_FAULT)
+		led->last_flag |= LED_FAULT_SHORT_CIRCUIT;
+
+	if (flags_val & LM36010_CURR_LIMIT)
+		led->last_flag |= LED_FAULT_OVER_CURRENT;
+
+	if (flags_val & LM3601X_UVLO_FAULT)
+		led->last_flag |= LED_FAULT_UNDER_VOLTAGE;
+
+	if (flags_val & LM3601X_IVFM_TRIP)
+		led->last_flag |= LED_FAULT_INPUT_VOLTAGE;
+
+	if (flags_val & LM3601X_THERM_SHUTDOWN)
+		led->last_flag |= LED_FAULT_LED_OVER_TEMPERATURE;
+
+	return led->last_flag;
+}
+
+static int lm3601x_brightness_set(struct led_classdev *cdev,
+					enum led_brightness brightness)
+{
+	struct led_classdev_flash *fled_cdev = lcdev_to_flcdev(cdev);
+	struct lm3601x_led *led = fled_cdev_to_led(fled_cdev);
+	int ret, led_mode_val;
+
+	mutex_lock(&led->lock);
+
+	ret = lm3601x_read_faults(led);
+	if (ret < 0)
+		goto out;
+
+	if (led->led_mode == LM3601X_LED_TORCH)
+		led_mode_val = LM3601X_MODE_TORCH;
+	else
+		led_mode_val = LM3601X_MODE_IR_DRV;
+
+	if (brightness == LED_OFF) {
+		ret = regmap_update_bits(led->regmap, LM3601X_ENABLE_REG,
+					led_mode_val, LED_OFF);
+		goto out;
+	}
+
+	ret = regmap_write(led->regmap, LM3601X_LED_TORCH_REG, brightness);
+	if (ret < 0)
+		goto out;
+
+	ret = regmap_update_bits(led->regmap, LM3601X_ENABLE_REG,
+				LM3601X_MODE_TORCH | LM3601X_MODE_IR_DRV,
+				led_mode_val);
+out:
+	mutex_unlock(&led->lock);
+	return ret;
+}
+
+static int lm3601x_flash_set(struct led_classdev_flash *fled_cdev,
+				bool state)
+{
+	struct lm3601x_led *led = fled_cdev_to_led(fled_cdev);
+	int timeout_reg_val = 0;
+	int current_timeout;
+	int ret;
+
+	mutex_lock(&led->lock);
+
+	ret = regmap_read(led->regmap, LM3601X_CFG_REG, &current_timeout);
+	if (ret < 0)
+		goto out;
+
+	if (led->flash_timeout >= LM3601X_TIMEOUT_XOVER_US)
+		timeout_reg_val = led->flash_timeout / LM3601X_UPPER_STEP_US + 0x07;
+	else
+		timeout_reg_val = led->flash_timeout / LM3601X_LOWER_STEP_US - 0x01;
+
+	if (led->flash_timeout != current_timeout)
+		ret = regmap_update_bits(led->regmap, LM3601X_CFG_REG,
+					LM3601X_TIMEOUT_MASK, timeout_reg_val);
+
+	if (state)
+		ret = regmap_update_bits(led->regmap, LM3601X_ENABLE_REG,
+					LM3601X_MODE_TORCH | LM3601X_MODE_IR_DRV,
+					LM3601X_MODE_STROBE);
+	else
+		ret = regmap_update_bits(led->regmap, LM3601X_ENABLE_REG,
+					LM3601X_MODE_STROBE, LED_OFF);
+
+	ret = lm3601x_read_faults(led);
+out:
+	mutex_unlock(&led->lock);
+	return ret;
+}
+
+static int lm3601x_flash_brightness_set(struct led_classdev_flash *fled_cdev,
+					u32 brightness)
+{
+	struct lm3601x_led *led = fled_cdev_to_led(fled_cdev);
+	int ret;
+	u8 brightness_val;
+
+	mutex_lock(&led->lock);
+	ret = lm3601x_read_faults(led);
+	if (ret < 0)
+		goto out;
+
+	if (brightness == LED_OFF) {
+		ret = regmap_update_bits(led->regmap, LM3601X_ENABLE_REG,
+					LM3601X_MODE_STROBE, LED_OFF);
+		goto out;
+	}
+
+	brightness_val = brightness / LM3601X_STROBE_REG_DIV;
+
+	ret = regmap_write(led->regmap, LM3601X_LED_FLASH_REG, brightness_val);
+out:
+	mutex_unlock(&led->lock);
+	return ret;
+}
+
+static int lm3601x_flash_timeout_set(struct led_classdev_flash *fled_cdev,
+				u32 timeout)
+{
+	struct lm3601x_led *led = fled_cdev_to_led(fled_cdev);
+	int ret = 0;
+
+	mutex_lock(&led->lock);
+
+	led->flash_timeout = timeout;
+
+	mutex_unlock(&led->lock);

drivers/leds/leds-lm3601x.c line 293

Quoted 10 lines
drivers/leds/leds-lm3601x.c new file +10 -0
+
+	return ret;
+}
+
+static int lm3601x_flash_get(struct led_classdev_flash *fled_cdev,
+				bool *state)
+{
+	struct lm3601x_led *led = fled_cdev_to_led(fled_cdev);
+	int ret;
+	int flash_state;

s/flash_state/strobe_state/

Quoted 20 lines
drivers/leds/leds-lm3601x.c new file +20 -0
+
+	mutex_lock(&led->lock);
+
+	ret = regmap_read(led->regmap, LM3601X_ENABLE_REG, &flash_state);
+	if (ret < 0)
+		goto out;
+
+	*state = flash_state & LM3601X_MODE_STROBE;
+
+out:
+	mutex_unlock(&led->lock);
+	return ret;
+}
+
+static int lm3601x_flash_fault_get(struct led_classdev_flash *fled_cdev,
+				u32 *fault)
+{
+	struct lm3601x_led *led = fled_cdev_to_led(fled_cdev);
+
+	lm3601x_read_faults(led);

drivers/leds/leds-lm3601x.c line 323

Quoted 10 lines
drivers/leds/leds-lm3601x.c new file +10 -0
+
+	*fault = led->last_flag;
+
+	return 0;
+}
+
+static const struct led_flash_ops flash_ops = {
+	.flash_brightness_set	= lm3601x_flash_brightness_set,
+	.strobe_set		= lm3601x_flash_set,
+	.strobe_get		= lm3601x_flash_get,

In case of the above two functions let's stay by "strobe".

I.e.: lm3601x_strobe_set and lm3601x_strobe_get.

Quoted 170 lines
drivers/leds/leds-lm3601x.c new file +169 -0
+	.timeout_set		= lm3601x_flash_timeout_set,
+	.fault_get		= lm3601x_flash_fault_get,
+};
+
+static int lm3601x_register_leds(struct lm3601x_led *led)
+{
+	struct led_classdev *led_cdev;
+	struct led_flash_setting *setting;
+
+	led->fled_cdev.ops = &flash_ops;
+
+	setting = &led->fled_cdev.timeout;
+	setting->min = LM3601X_MIN_TIMEOUT_US;
+	setting->max = led->max_flash_timeout;
+	setting->step = LM3601X_LOWER_STEP_US;
+	setting->val = led->max_flash_timeout;
+
+	setting = &led->fled_cdev.brightness;
+	setting->min = LM3601X_MIN_STROBE_I_UA;
+	setting->max = led->flash_current_max;
+	setting->step = LM3601X_TORCH_REG_DIV;
+	setting->val = led->flash_current_max;
+
+	led_cdev = &led->fled_cdev.led_cdev;
+	led_cdev->name = led->led_name;
+	led_cdev->brightness_set_blocking = lm3601x_brightness_set;
+	led_cdev->max_brightness = DIV_ROUND_UP(led->torch_current_max,
+						LM3601X_TORCH_REG_DIV);
+	led_cdev->flags |= LED_DEV_CAP_FLASH;
+
+	return led_classdev_flash_register(&led->client->dev, &led->fled_cdev);
+}
+
+static int lm3601x_parse_node(struct lm3601x_led *led,
+			      struct device_node *node)
+{
+	struct fwnode_handle *child = NULL;
+	int ret = -ENODEV;
+	const char *name;
+
+	child = device_get_next_child_node(&led->client->dev, child);
+	if (!child) {
+		dev_err(&led->client->dev, "No LED Child node\n");
+		return ret;
+	}
+
+	ret = fwnode_property_read_u32(child, "reg", &led->led_mode);
+	if (ret) {
+		dev_err(&led->client->dev, "reg DT property missing\n");
+		goto out_err;
+	}
+
+	if (led->led_mode > LM3601X_LED_TORCH ||
+	    led->led_mode < LM3601X_LED_IR) {
+		dev_warn(&led->client->dev, "Invalid led mode requested\n");
+		ret = -EINVAL;
+		goto out_err;
+	}
+
+	ret = fwnode_property_read_string(child, "label", &name);
+	if (ret) {
+		if (led->led_mode == LM3601X_LED_TORCH)
+			name = "torch";
+		else
+			name = "infrared";
+	}
+
+	snprintf(led->led_name, sizeof(led->led_name),
+		"%s:%s", led->client->name, name);
+
+	ret = fwnode_property_read_u32(child, "led-max-microamp",
+					&led->torch_current_max);
+	if (ret < 0) {
+		dev_warn(&led->client->dev,
+			"led-max-microamp DT property missing\n");
+		goto out_err;
+	}
+
+	ret = fwnode_property_read_u32(child, "flash-max-microamp",
+				&led->flash_current_max);
+	if (ret < 0) {
+		dev_warn(&led->client->dev,
+			 "flash-max-microamp DT property missing\n");
+		goto out_err;
+	}
+
+	ret = fwnode_property_read_u32(child, "flash-max-timeout-us",
+				&led->max_flash_timeout);
+	if (ret < 0) {
+		dev_warn(&led->client->dev,
+			 "flash-max-timeout-us DT property missing\n");
+		goto out_err;
+	}
+
+out_err:
+	fwnode_handle_put(child);
+	return ret;
+}
+
+static int lm3601x_probe(struct i2c_client *client,
+			const struct i2c_device_id *id)
+{
+	struct lm3601x_led *led;
+	int err;
+
+	led = devm_kzalloc(&client->dev, sizeof(*led), GFP_KERNEL);
+	if (!led)
+		return -ENOMEM;
+
+	led->client = client;
+	i2c_set_clientdata(client, led);
+
+	err = lm3601x_parse_node(led, client->dev.of_node);
+	if (err < 0)
+		return -ENODEV;
+
+	led->regmap = devm_regmap_init_i2c(client, &lm3601x_regmap);
+	if (IS_ERR(led->regmap)) {
+		err = PTR_ERR(led->regmap);
+		dev_err(&client->dev,
+			"Failed to allocate register map: %d\n", err);
+		return err;
+	}
+
+	mutex_init(&led->lock);
+
+	return lm3601x_register_leds(led);
+}
+
+static int lm3601x_remove(struct i2c_client *client)
+{
+	struct lm3601x_led *led = i2c_get_clientdata(client);
+
+	led_classdev_flash_unregister(&led->fled_cdev);
+	mutex_destroy(&led->lock);
+
+	return regmap_update_bits(led->regmap, LM3601X_ENABLE_REG,
+			   LM3601X_ENABLE_MASK,
+			   LM3601X_MODE_STANDBY);
+}
+
+static const struct i2c_device_id lm3601x_id[] = {
+	{ "LM36010", CHIP_LM36010 },
+	{ "LM36011", CHIP_LM36011 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, lm3601x_id);
+
+static const struct of_device_id of_lm3601x_leds_match[] = {
+	{ .compatible = "ti,lm36010", },
+	{ .compatible = "ti,lm36011", },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, of_lm3601x_leds_match);
+
+static struct i2c_driver lm3601x_i2c_driver = {
+	.driver = {
+		.name = "lm3601x",
+		.of_match_table = of_lm3601x_leds_match,
+	},
+	.probe = lm3601x_probe,
+	.remove = lm3601x_remove,
+	.id_table = lm3601x_id,
+};
+module_i2c_driver(lm3601x_i2c_driver);
+
+MODULE_DESCRIPTION("Texas Instruments Flash Lighting driver for LM3601X");
+MODULE_AUTHOR("Dan Murphy <[email protected]>");
+MODULE_LICENSE("GPL v2");
Signature · 2 lines
Best regards,
Jacek Anaszewski