Skip to contentSkip to conversation

package_manager.py: get rid of ROOTFS_RPM_DEBUG in RpmPM()

PATCH New Alexander Kanavin 1 participant 6 messages May 24, 2018

lore
Share & tools
lore
#0 lore raw

PATCH 1/6 package_manager.py: get rid of ROOTFS_RPM_DEBUG in RpmPM()

This was undocumented, and it's better to just always enable full debug output, as this allows immediate generation of logs with full diagnostics when things go not as expected.

Also, change the output of dnf from note to debug level; this does not affect what is written to log file, but does reduce the verbosity of bitbake -v.

---
 meta/lib/oe/package_manager.py | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
meta/lib/oe/package_manager.py +2 -2
index 1cba5ee9688..5ac729455e9 100644
@@ -888,7 +888,7 @@ class RpmPM(PackageManager):
         os.environ['RPM_ETCCONFIGDIR'] = self.target_rootfs
 
         dnf_cmd = bb.utils.which(os.getenv('PATH'), "dnf")
-        standard_dnf_args = (["-v", "--rpmverbosity=debug"] if self.d.getVar('ROOTFS_RPM_DEBUG') else []) + ["-y",
+        standard_dnf_args = ["-v", "--rpmverbosity=debug", "-y",
                              "-c", oe.path.join(self.target_rootfs, "etc/dnf/dnf.conf"),
                              "--setopt=reposdir=%s" %(oe.path.join(self.target_rootfs, "etc/yum.repos.d")),
                              "--repofrompath=oe-repo,%s" % (self.rpm_repo_dir),
@@ -900,7 +900,7 @@ class RpmPM(PackageManager):
         try:
             output = subprocess.check_output(cmd,stderr=subprocess.STDOUT).decode("utf-8")
             if print_output:
-                bb.note(output)
+                bb.debug(1, output)
             return output
         except subprocess.CalledProcessError as e:
             if print_output:
Signature · 1 line
2.17.0
#1 lore raw

PATCH 2/6 gtk-immodules-cache.bbclass: convert cache creation to postinst_intercept mechanism

This has the following benefits:
- consistent with how the other caches are created into target rootfs
- only runs once per package manager transaction, instead of once per every immodule package
- correctly postpones to first boot if qemu is not working; from postinst itself this would've required special arrangements to avoid what is now a do_rootfs failure.

---
 meta/classes/gtk-immodules-cache.bbclass      | 70 ++++++++-----------
 .../update_gtk_immodules_cache                | 18 +++++
 2 files changed, 46 insertions(+), 42 deletions(-)
 create mode 100644 scripts/postinst-intercepts/update_gtk_immodules_cache
meta/classes/gtk-immodules-cache.bbclass +28 -42
index 3d82dbe9e34..9bb0af8b26a 100644
@@ -10,53 +10,39 @@ GTKIMMODULES_PACKAGES ?= "${PN}"
 
 gtk_immodule_cache_postinst() {
 if [ "x$D" != "x" ]; then
-        if [ -x $D${bindir}/gtk-query-immodules-2.0 ]; then
-            IMFILES=$(ls $D${libdir}/gtk-2.0/*/immodules/*.so)
-            ${@qemu_run_binary(d, '$D', '${bindir}/gtk-query-immodules-2.0')} \
-                $IMFILES > $D${libdir}/gtk-2.0/2.10.0/immodules.cache 2>/dev/null &&
-                sed -i -e "s:$D::" $D${libdir}/gtk-2.0/2.10.0/immodules.cache
-        fi
-        if [ -x $D${bindir}/gtk-query-immodules-3.0 ]; then
-            IMFILES=$(ls $D${libdir}/gtk-3.0/*/immodules/*.so)
-            ${@qemu_run_binary(d, '$D', '${bindir}/gtk-query-immodules-3.0')} \
-                $IMFILES > $D${libdir}/gtk-3.0/3.0.0/immodules.cache 2>/dev/null &&
-                sed -i -e "s:$D::" $D${libdir}/gtk-3.0/3.0.0/immodules.cache
-        fi
-
-    [ $? -ne 0 ] && exit 1
-    exit 0
-fi
-if [ ! -z `which gtk-query-immodules-2.0` ]; then
-    gtk-query-immodules-2.0 > ${libdir}/gtk-2.0/2.10.0/immodules.cache
-fi
-if [ ! -z `which gtk-query-immodules-3.0` ]; then
-    gtk-query-immodules-3.0 > ${libdir}/gtk-3.0/3.0.0/immodules.cache
+    $INTERCEPT_DIR/postinst_intercept update_gtk_immodules_cache ${PKG} \
+            mlprefix=${MLPREFIX} \
+            binprefix=${MLPREFIX} \
+            libdir=${libdir} \
+            libexecdir=${libexecdir} \
+            base_libdir=${base_libdir} \
+            bindir=${bindir}
+else
+    if [ ! -z `which gtk-query-immodules-2.0` ]; then
+        gtk-query-immodules-2.0 > ${libdir}/gtk-2.0/2.10.0/immodules.cache
+    fi
+    if [ ! -z `which gtk-query-immodules-3.0` ]; then
+        gtk-query-immodules-3.0 > ${libdir}/gtk-3.0/3.0.0/immodules.cache
+    fi
 fi
 }
 
 gtk_immodule_cache_postrm() {
 if [ "x$D" != "x" ]; then
-        if [ -x $D${bindir}/gtk-query-immodules-2.0 ]; then
-            IMFILES=$(ls $D${libdir}/gtk-2.0/*/immodules/*.so)
-            ${@qemu_run_binary(d, '$D', '${bindir}/gtk-query-immodules-2.0')} \
-                $IMFILES > $D${libdir}/gtk-2.0/2.10.0/immodules.cache 2>/dev/null &&
-                sed -i -e "s:$D::" $D${libdir}/gtk-2.0/2.10.0/immodules.cache
-        fi
-        if [ -x $D${bindir}/gtk-query-immodules-3.0 ]; then
-            IMFILES=$(ls $D${libdir}/gtk-3.0/*/immodules/*.so)
-            ${@qemu_run_binary(d, '$D', '${bindir}/gtk-query-immodules-3.0')} \
-                $IMFILES > $D${libdir}/gtk-3.0/3.0.0/immodules.cache 2>/dev/null &&
-                sed -i -e "s:$D::" $D${libdir}/gtk-3.0/3.0.0/immodules.cache
-        fi
-
-    [ $? -ne 0 ] && exit 1
-    exit 0
-fi
-if [ ! -z `which gtk-query-immodules-2.0` ]; then
-    gtk-query-immodules-2.0 > ${libdir}/gtk-2.0/2.10.0/immodules.cache
-fi
-if [ ! -z `which gtk-query-immodules-3.0` ]; then
-    gtk-query-immodules-3.0 > ${libdir}/gtk-3.0/3.0.0/immodules.cache
+    $INTERCEPT_DIR/postinst_intercept update_gtk_immodules_cache ${PKG} \
+            mlprefix=${MLPREFIX} \
+            binprefix=${MLPREFIX} \
+            libdir=${libdir} \
+            libexecdir=${libexecdir} \
+            base_libdir=${base_libdir} \
+            bindir=${bindir}
+else
+    if [ ! -z `which gtk-query-immodules-2.0` ]; then
+        gtk-query-immodules-2.0 > ${libdir}/gtk-2.0/2.10.0/immodules.cache
+    fi
+    if [ ! -z `which gtk-query-immodules-3.0` ]; then
+        gtk-query-immodules-3.0 > ${libdir}/gtk-3.0/3.0.0/immodules.cache
+    fi
 fi
 }
 
scripts/postinst-intercepts/update_gtk_immodules_cache new file +18 -0
new file mode 100644
index 00000000000..e2b9ff74382
@@ -0,0 +1,18 @@
+#!/bin/sh
+
+set -e
+
+if [ -x $D${bindir}/gtk-query-immodules-2.0 ]; then
+    PSEUDO_UNLOAD=1 qemuwrapper -L $D -E LD_LIBRARY_PATH=$D${libdir}:$D${base_libdir} \
+        $D/${bindir}/gtk-query-immodules-2.0 \
+        > $D${libdir}/gtk-2.0/2.10.0/immodules.cache &&
+        sed -i -e "s:$D::" $D${libdir}/gtk-2.0/2.10.0/immodules.cache
+        chown root:root $D${libdir}/gtk-2.0/2.10.0/immodules.cache
+fi
+if [ -x $D${bindir}/gtk-query-immodules-3.0 ]; then
+    PSEUDO_UNLOAD=1 qemuwrapper -L $D -E LD_LIBRARY_PATH=$D${libdir}:$D${base_libdir} \
+        $D/${bindir}/gtk-query-immodules-3.0 \
+        > $D${libdir}/gtk-3.0/3.0.0/immodules.cache &&
+        sed -i -e "s:$D::" $D${libdir}/gtk-3.0/3.0.0/immodules.cache
+        chown root:root $D${libdir}/gtk-3.0/3.0.0/immodules.cache
+fi
Signature · 1 line
2.17.0
#2 lore raw

PATCH 3/6 lib/oe/package_manager: turn postinst failure warnings into bitbake failures

In reply to Alexander Kanavin

Sumo release provides a transition period so that deferrals to first boot via 'exit 1' can be converted to pkg_postinst_ontarget(). For the next release however, postinst script failures should be treated as such.

[YOCTO #12607]

---
 meta/lib/oe/package_manager.py               | 22 +++++++-------------
 meta/lib/oeqa/selftest/cases/runtime_test.py |  4 ++--
 2 files changed, 9 insertions(+), 17 deletions(-)
meta/lib/oe/package_manager.py +7 -15
index 5ac729455e9..516630b5cfb 100644
@@ -84,10 +84,10 @@ def opkg_query(cmd_output):
 
     return output
 
-# Note: this should be bb.fatal in the future.
-def failed_postinsts_warn(pkgs, log_path):
-    bb.warn("""Intentionally failing postinstall scriptlets of %s to defer them to first boot is deprecated. Please place them into pkg_postinst_ontarget_${PN} ().
-If deferring to first boot wasn't the intent, then scriptlet failure may mean an issue in the recipe, or a regression elsewhere.
+def failed_postinsts_abort(pkgs, log_path):
+    bb.fatal("""Postinstall scriptlets of %s have failed. If the intention is to defer them to first boot,
+then please place them into pkg_postinst_ontarget_${PN} ().
+Deferring to first boot via 'exit 1' is no longer supported.
 Details of the failure are in %s.""" %(pkgs, log_path))
 
 class Indexer(object, metaclass=ABCMeta):
@@ -789,9 +789,7 @@ class RpmPM(PackageManager):
                 failed_scriptlets_pkgnames[line.split()[-1]] = True
 
         if len(failed_scriptlets_pkgnames) > 0:
-            failed_postinsts_warn(list(failed_scriptlets_pkgnames.keys()), self.d.expand("${T}/log.do_${BB_CURRENTTASK}"))
-        for pkg in failed_scriptlets_pkgnames.keys():
-            self.save_rpmpostinst(pkg)
+            failed_postinsts_abort(list(failed_scriptlets_pkgnames.keys()), self.d.expand("${T}/log.do_${BB_CURRENTTASK}"))
 
     def remove(self, pkgs, with_dependencies = True):
         if len(pkgs) == 0:
@@ -1269,7 +1267,7 @@ class OpkgPM(OpkgDpkgPM):
                     bb.warn(line)
                     failed_pkgs.append(line.split(".")[0])
             if failed_pkgs:
-                failed_postinsts_warn(failed_pkgs, self.d.expand("${T}/log.do_${BB_CURRENTTASK}"))
+                failed_postinsts_abort(failed_pkgs, self.d.expand("${T}/log.do_${BB_CURRENTTASK}"))
         except subprocess.CalledProcessError as e:
             (bb.fatal, bb.warn)[attempt_only]("Unable to install packages. "
                                               "Command '%s' returned %d:\n%s" %
@@ -1519,7 +1517,6 @@ class DpkgPM(OpkgDpkgPM):
         os.environ['INTERCEPT_DIR'] = self.intercepts_dir
         os.environ['NATIVE_ROOT'] = self.d.getVar('STAGING_DIR_NATIVE')
 
-        failed_pkgs = []
         for pkg_name in installed_pkgs:
             for control_script in control_scripts:
                 p_full = os.path.join(info_dir, pkg_name + control_script.suffix)
@@ -1534,12 +1531,7 @@ class DpkgPM(OpkgDpkgPM):
                         bb.warn("%s for package %s failed with %d:\n%s" %
                                 (control_script.name, pkg_name, e.returncode,
                                     e.output.decode("utf-8")))
-                        failed_postinsts_warn([pkg_name], self.d.expand("${T}/log.do_${BB_CURRENTTASK}"))
-                        failed_pkgs.append(pkg_name)
-                        break
-
-        if len(failed_pkgs):
-            self.mark_packages("unpacked", failed_pkgs)
+                        failed_postinsts_abort([pkg_name], self.d.expand("${T}/log.do_${BB_CURRENTTASK}"))
 
     def update(self):
         os.environ['APT_CONFIG'] = self.apt_conf_file
meta/lib/oeqa/selftest/cases/runtime_test.py +2 -2
index 9c9b4b34111..21e2c405df1 100644
@@ -249,8 +249,8 @@ class Postinst(OESelftestTestCase):
                 features = 'CORE_IMAGE_EXTRA_INSTALL = "postinst-rootfs-failing"\n'
                 features += 'PACKAGE_CLASSES = "%s"\n' % classes
                 self.write_config(features)
-                bb_result = bitbake('core-image-minimal')
-                self.assertGreaterEqual(bb_result.output.find("Intentionally failing postinstall scriptlets of ['postinst-rootfs-failing'] to defer them to first boot is deprecated."), 0,
+                bb_result = bitbake('core-image-minimal', ignore_status=True)
+                self.assertGreaterEqual(bb_result.output.find("Postinstall scriptlets of ['postinst-rootfs-failing'] have failed."), 0,
                     "Warning about a failed scriptlet not found in bitbake output: %s" %(bb_result.output))
 
                 self.assertTrue(os.path.isfile(os.path.join(hosttestdir, "rootfs-before-failure")),
Signature · 1 line
2.17.0
#3 lore raw

PATCH 4/6 qemuwrapper-cross: always fall back to x86_64 and i386 variants of qemu

In reply to Alexander Kanavin

This helps in particular when executing nativesdk- postinsts; previously they were attempted only with target qemu, and this obivously failed.

This could be solved by properly mapping the binary to be run to the best available qemu variant for the binary architecture, but that would be a lot more invasive change, and so I think a simple fallback should be fine.

Also, add 'set -x' so we know exactly what is being executed.

---
 .../qemu/qemuwrapper-cross_1.0.bb             | 29 +++++++------------
 1 file changed, 11 insertions(+), 18 deletions(-)
meta/recipes-devtools/qemu/qemuwrapper-cross_1.0.bb +11 -18
index c983fbae667..d90ce36ba90 100644
@@ -16,31 +16,24 @@ do_install () {
 	echo "#!/bin/sh" > ${D}${bindir_crossscripts}/qemuwrapper
 	qemu_binary=${@qemu_target_binary(d)}
 	qemu_options='${QEMU_OPTIONS}'
+	echo "set -x" >> ${D}${bindir_crossscripts}/qemuwrapper
 	echo "$qemu_binary $qemu_options \"\$@\"" >> ${D}${bindir_crossscripts}/qemuwrapper
-	fallback_qemu_bin=
-	case $qemu_binary in
-		"qemu-i386")
-			fallback_qemu_bin=qemu-x86_64
-			;;
-		"qemu-x86_64")
-			fallback_qemu_bin=qemu-i386
-			;;
-		*)
-			;;
-	esac
-
-	if [ -n "$fallback_qemu_bin" ]; then
-
-		cat >> ${D}${bindir_crossscripts}/qemuwrapper << EOF
+
+	cat >> ${D}${bindir_crossscripts}/qemuwrapper << EOF
 rc=\$?
 if [ \$rc = 255 ]; then
-	$fallback_qemu_bin "\$@"
+	qemu-x86_64 $qemu_options "\$@"
 	rc=\$?
 fi
-exit \$rc
 EOF
 
-	fi
+	cat >> ${D}${bindir_crossscripts}/qemuwrapper << EOF
+if [ \$rc = 255 ]; then
+	qemu-i386 $qemu_options "\$@"
+	rc=\$?
+fi
+exit \$rc
+EOF
 
 	chmod +x ${D}${bindir_crossscripts}/qemuwrapper
 }
Signature · 1 line
2.17.0
#4 lore raw

PATCH 5/6 qemuwrapper-cross: set LD_LIBRARY_PATH directly

In reply to Alexander Kanavin

Previously the library paths were passed down from recipes, and if said recipes were allarch, and library paths were something else than /lib and /usr/lib (multilib, x32, etc.), things broke down.

---
 meta/recipes-devtools/qemu/qemuwrapper-cross_1.0.bb    | 2 +-
 scripts/postinst-intercepts/update_font_cache          | 3 +--
 scripts/postinst-intercepts/update_gio_module_cache    | 3 +--
 scripts/postinst-intercepts/update_gtk_immodules_cache | 6 ++----
 scripts/postinst-intercepts/update_pixbuf_cache        | 3 +--
 5 files changed, 6 insertions(+), 11 deletions(-)
meta/recipes-devtools/qemu/qemuwrapper-cross_1.0.bb +1 -1
index d90ce36ba90..6102db33588 100644
@@ -15,7 +15,7 @@ do_install () {
 
 	echo "#!/bin/sh" > ${D}${bindir_crossscripts}/qemuwrapper
 	qemu_binary=${@qemu_target_binary(d)}
-	qemu_options='${QEMU_OPTIONS}'
+	qemu_options='${QEMU_OPTIONS} -E LD_LIBRARY_PATH=$D${libdir}:$D${base_libdir}'
 	echo "set -x" >> ${D}${bindir_crossscripts}/qemuwrapper
 	echo "$qemu_binary $qemu_options \"\$@\"" >> ${D}${bindir_crossscripts}/qemuwrapper
 
scripts/postinst-intercepts/update_font_cache +1 -2
index bf65e19a41d..e797c65f2fc 100644
@@ -2,6 +2,5 @@
 
 set -e
 
-PSEUDO_UNLOAD=1 qemuwrapper -L $D -E LD_LIBRARY_PATH=$D/${libdir}:$D/${base_libdir} \
-					-E ${fontconfigcacheenv} $D${bindir}/fc-cache --sysroot=$D --system-only ${fontconfigcacheparams}
+PSEUDO_UNLOAD=1 qemuwrapper -L $D -E ${fontconfigcacheenv} $D${bindir}/fc-cache --sysroot=$D --system-only ${fontconfigcacheparams}
 chown -R root:root $D${fontconfigcachedir}
scripts/postinst-intercepts/update_gio_module_cache +1 -2
index fc3f9d0d6ce..7ad9c5a7d09 100644
@@ -2,8 +2,7 @@
 
 set -e
 
-PSEUDO_UNLOAD=1 qemuwrapper -L $D -E LD_LIBRARY_PATH=$D${libdir}:$D${base_libdir} \
-	$D${libexecdir}/${binprefix}gio-querymodules $D${libdir}/gio/modules/
+PSEUDO_UNLOAD=1 qemuwrapper -L $D $D${libexecdir}/${binprefix}gio-querymodules $D${libdir}/gio/modules/
 
 [ ! -e $D${libdir}/gio/modules/giomodule.cache ] ||
 	chown root:root $D${libdir}/gio/modules/giomodule.cache
scripts/postinst-intercepts/update_gtk_immodules_cache +2 -4
index e2b9ff74382..8a69a26bb17 100644
@@ -3,15 +3,13 @@
 set -e
 
 if [ -x $D${bindir}/gtk-query-immodules-2.0 ]; then
-    PSEUDO_UNLOAD=1 qemuwrapper -L $D -E LD_LIBRARY_PATH=$D${libdir}:$D${base_libdir} \
-        $D/${bindir}/gtk-query-immodules-2.0 \
+    PSEUDO_UNLOAD=1 qemuwrapper -L $D $D/${bindir}/gtk-query-immodules-2.0 \
         > $D${libdir}/gtk-2.0/2.10.0/immodules.cache &&
         sed -i -e "s:$D::" $D${libdir}/gtk-2.0/2.10.0/immodules.cache
         chown root:root $D${libdir}/gtk-2.0/2.10.0/immodules.cache
 fi
 if [ -x $D${bindir}/gtk-query-immodules-3.0 ]; then
-    PSEUDO_UNLOAD=1 qemuwrapper -L $D -E LD_LIBRARY_PATH=$D${libdir}:$D${base_libdir} \
-        $D/${bindir}/gtk-query-immodules-3.0 \
+    PSEUDO_UNLOAD=1 qemuwrapper -L $D $D/${bindir}/gtk-query-immodules-3.0 \
         > $D${libdir}/gtk-3.0/3.0.0/immodules.cache &&
         sed -i -e "s:$D::" $D${libdir}/gtk-3.0/3.0.0/immodules.cache
         chown root:root $D${libdir}/gtk-3.0/3.0.0/immodules.cache
scripts/postinst-intercepts/update_pixbuf_cache +1 -2
index 5d44075fb4c..efb56facc93 100644
@@ -5,7 +5,6 @@ set -e
 export GDK_PIXBUF_MODULEDIR=$D${libdir}/gdk-pixbuf-2.0/2.10.0/loaders
 export GDK_PIXBUF_FATAL_LOADER=1
 
-PSEUDO_UNLOAD=1 qemuwrapper -L $D -E LD_LIBRARY_PATH=$D/${libdir}:$D/${base_libdir}\
-    $D${libdir}/gdk-pixbuf-2.0/gdk-pixbuf-query-loaders \
+PSEUDO_UNLOAD=1 qemuwrapper -L $D $D${libdir}/gdk-pixbuf-2.0/gdk-pixbuf-query-loaders \
     >$GDK_PIXBUF_MODULEDIR/../loaders.cache && \
     sed -i -e "s:$D::g" $GDK_PIXBUF_MODULEDIR/../loaders.cache
Signature · 1 line
2.17.0
#5 lore raw

PATCH 6/6 package_manger.py: rework postinst_intercept failures

In reply to Alexander Kanavin

Previously a warning was printed regardless of context and nature of the failure.

Now, the following is considered when a failure happens:
1) whether we are installing packages into a target image, or populating a SDK with host or target packages.
2) whether the failure was due to qemu not supporting the target machine.

Accordingly, warnings, notes, and failures are printed, and postponing to first boot happens if possible.

---
 meta/lib/oe/package_manager.py                | 19 ++++++++++++++++---
 meta/lib/oe/sdk.py                            | 12 ++++++------
 .../qemu/qemuwrapper-cross_1.0.bb             |  5 +++++
 3 files changed, 27 insertions(+), 9 deletions(-)
meta/lib/oe/package_manager.py +16 -3
index 516630b5cfb..f87f76fec99 100644
@@ -370,7 +370,7 @@ class PackageManager(object, metaclass=ABCMeta):
                 self._handle_intercept_failure(registered_pkgs)
 
 
-    def run_intercepts(self):
+    def run_intercepts(self, populate_sdk=None):
         intercepts_dir = self.intercepts_dir
 
         bb.note("Running intercept scripts:")
@@ -392,9 +392,22 @@ class PackageManager(object, metaclass=ABCMeta):
                 output = subprocess.check_output(script_full, stderr=subprocess.STDOUT)
                 if output: bb.note(output.decode("utf-8"))
             except subprocess.CalledProcessError as e:
-                bb.warn("The postinstall intercept hook '%s' failed, details in %s/log.do_%s" % (script, self.d.getVar('T'), self.d.getVar('BB_CURRENTTASK')))
                 bb.note("Exit code %d. Output:\n%s" % (e.returncode, e.output.decode("utf-8")))
-                self._postpone_to_first_boot(script_full)
+                if populate_sdk == 'host':
+                    bb.warn("The postinstall intercept hook '%s' failed, details in %s/log.do_%s" % (script, self.d.getVar('T'), self.d.getVar('BB_CURRENTTASK')))
+                elif populate_sdk == 'target':
+                    if "qemuwrapper: qemu usermode is not supported" in e.output.decode("utf-8"):
+                        bb.warn("The postinstall intercept hook '%s' could not be executed due to missing qemu usermode support, details in %s/log.do_%s"
+                                % (script, self.d.getVar('T'), self.d.getVar('BB_CURRENTTASK')))
+                    else:
+                        bb.fatal("The postinstall intercept hook '%s' failed, details in %s/log.do_%s" % (script, self.d.getVar('T'), self.d.getVar('BB_CURRENTTASK')))
+                else:
+                    if "qemuwrapper: qemu usermode is not supported" in e.output.decode("utf-8"):
+                        bb.note("The postinstall intercept hook '%s' could not be executed due to missing qemu usermode support, details in %s/log.do_%s"
+                                % (script, self.d.getVar('T'), self.d.getVar('BB_CURRENTTASK')))
+                        self._postpone_to_first_boot(script_full)
+                    else:
+                        bb.fatal("The postinstall intercept hook '%s' failed, details in %s/log.do_%s" % (script, self.d.getVar('T'), self.d.getVar('BB_CURRENTTASK')))
 
     @abstractmethod
     def update(self):
meta/lib/oe/sdk.py +6 -6
index d6a503372a3..0d39ea8a91e 100644
@@ -209,7 +209,7 @@ class RpmSdk(Sdk):
 
         self.target_pm.install_complementary(self.d.getVar('SDKIMAGE_INSTALL_COMPLEMENTARY'))
 
-        self.target_pm.run_intercepts()
+        self.target_pm.run_intercepts(populate_sdk='target')
 
         execute_pre_post_process(self.d, self.d.getVar("POPULATE_SDK_POST_TARGET_COMMAND"))
 
@@ -220,7 +220,7 @@ class RpmSdk(Sdk):
         self._populate_sysroot(self.host_pm, self.host_manifest)
         self.install_locales(self.host_pm)
 
-        self.host_pm.run_intercepts()
+        self.host_pm.run_intercepts(populate_sdk='host')
 
         execute_pre_post_process(self.d, self.d.getVar("POPULATE_SDK_POST_HOST_COMMAND"))
 
@@ -297,7 +297,7 @@ class OpkgSdk(Sdk):
 
         self.target_pm.install_complementary(self.d.getVar('SDKIMAGE_INSTALL_COMPLEMENTARY'))
 
-        self.target_pm.run_intercepts()
+        self.target_pm.run_intercepts(populate_sdk='target')
 
         execute_pre_post_process(self.d, self.d.getVar("POPULATE_SDK_POST_TARGET_COMMAND"))
 
@@ -308,7 +308,7 @@ class OpkgSdk(Sdk):
         self._populate_sysroot(self.host_pm, self.host_manifest)
         self.install_locales(self.host_pm)
 
-        self.host_pm.run_intercepts()
+        self.host_pm.run_intercepts(populate_sdk='host')
 
         execute_pre_post_process(self.d, self.d.getVar("POPULATE_SDK_POST_HOST_COMMAND"))
 
@@ -386,7 +386,7 @@ class DpkgSdk(Sdk):
 
         self.target_pm.install_complementary(self.d.getVar('SDKIMAGE_INSTALL_COMPLEMENTARY'))
 
-        self.target_pm.run_intercepts()
+        self.target_pm.run_intercepts(populate_sdk='target')
 
         execute_pre_post_process(self.d, self.d.getVar("POPULATE_SDK_POST_TARGET_COMMAND"))
 
@@ -399,7 +399,7 @@ class DpkgSdk(Sdk):
         self._populate_sysroot(self.host_pm, self.host_manifest)
         self.install_locales(self.host_pm)
 
-        self.host_pm.run_intercepts()
+        self.host_pm.run_intercepts(populate_sdk='host')
 
         execute_pre_post_process(self.d, self.d.getVar("POPULATE_SDK_POST_HOST_COMMAND"))
 
meta/recipes-devtools/qemu/qemuwrapper-cross_1.0.bb +5 -0
index 6102db33588..0fe0b511b8f 100644
@@ -32,6 +32,11 @@ if [ \$rc = 255 ]; then
 	qemu-i386 $qemu_options "\$@"
 	rc=\$?
 fi
+
+if [ ${@bb.utils.contains('MACHINE_FEATURES', 'qemu-usermode', 'True', 'False', d)} = False ]; then
+        echo "qemuwrapper: qemu usermode is not supported"
+fi
+
 exit \$rc
 EOF
 
Signature · 1 line
2.17.0