Add new packge Shadowsocks-libev v3.1.3

PATCH New Min Xu 2 participants 4 messages May 24, 2018 – May 30, 2018

lore

Share & tools

lore

Min Xu

author

2018-05-24 17:12 UTC #0 lore raw

PATCH 1/1 Add new packge Shadowsocks-libev v3.1.3

Signed-off-by Min Xu <[email protected]>

---
 package/Config.in                              |  1 +
 package/shadowsocks-libev/Config.in            | 12 ++++++++++++
 package/shadowsocks-libev/shadowsocks-libev.mk | 20 ++++++++++++++++++++
 3 files changed, 33 insertions(+)
 create mode 100644 package/shadowsocks-libev/Config.in
 create mode 100644 package/shadowsocks-libev/shadowsocks-libev.mk

package/Config.in +1 -0

index ecee493..1427665 100644
@@ -1846,6 +1846,7 @@ endif
 	source "package/samba4/Config.in"
 	source "package/sconeserver/Config.in"
 	source "package/ser2net/Config.in"
+        source "package/shadowsocks-libev/Config.in"
 	source "package/shairport-sync/Config.in"
 	source "package/shellinabox/Config.in"
 	source "package/smcroute/Config.in"

package/shadowsocks-libev/Config.in new file +12 -0

new file mode 100644
index 0000000..78fd35a
@@ -0,0 +1,12 @@
+config BR2_PACKAGE_SHADOWSOCKS_LIBEV
+        bool "shadowsocks-libev"
+        select BR2_PACKAGE_LIBSODIUM
+        select BR2_PACKAGE_MBEDTLS
+        select BR2_PACKAGE_PCRE
+        select BR2_PACKAGE_C_ARES
+        select BR2_PACKAGE_LIBEV
+        help
+          Shadowsocks-libev is a lightweight secured SOCKS5 proxy for
+          embedded devices and low-end boxes.
+
+          https://github.com/shadowsocks/shadowsocks-libev

package/shadowsocks-libev/shadowsocks-libev.mk new file +20 -0

new file mode 100644
index 0000000..1c7f76a
@@ -0,0 +1,20 @@
+################################################################################
+#
+# SHADOWSOCKS_LIBEV
+#
+################################################################################
+
+SHADOWSOCKS_LIBEV_VERSION = 3.1.3
+SHADOWSOCKS_LIBEV_SOURCE = shadowsocks-libev-$(SHADOWSOCKS_LIBEV_VERSION).tar.gz
+SHADOWSOCKS_LIBEV_SITE = https://github.com/shadowsocks/shadowsocks-libev/releases/download/v$(SHADOWSOCKS_LIBEV_VERSION)
+SHADOWSOCKS_LIBEV_LICENSE = GPLv3
+SHADOWSOCKS_LIBEV_DEPENDENCIES = host-pkgconf
+SHADOWSOCKS_LIBEV_LICENSE_FILES = COPYING
+SHADOWSOCKS_LIBEV_INSTALL_STAGING = YES
+SHADOWSOCKS_LIBEV_CONF_ENV = PCRECONFIG=$(STAGING_DIR)/usr/bin/pcre-config
+SHADOWSOCKS_LIBEV_DEPENDENCIES += pcre
+SHADOWSOCKS_LIBEV_CONF_OPTS = --disable-documentation --with-pcre=$(STAGING_DIR)/usr/bin/
+
+$(eval $(autotools-package))
+$(eval $(host-autotools-package))
+

Signature · 1 line

2.11.0

Arnout Vandecappelle

2018-05-27 15:47 UTC #1 lore raw

PATCH 1/1 Add new packge Shadowsocks-libev v3.1.3

Hi Min,

Thank you for your contributions. There are several problems with your patch,
could you fix them and resubmit?

First of all, the subject line should be:

shadowsocks-libev: new package

Quoted 5 lines · Min Xu

Signed-off-by Min Xu <[email protected]>

---
 package/Config.in                              |  1 +
 package/shadowsocks-libev/Config.in            | 12 ++++++++++++
 package/shadowsocks-libev/shadowsocks-libev.mk | 20 ++++++++++++++++++++

Please also add a hash file, containing a hash for the tarball and for all
license files.

package/Config.in endif · line 1849

Quoted 13 lines

 3 files changed, 33 insertions(+)
 create mode 100644 package/shadowsocks-libev/Config.in
 create mode 100644 package/shadowsocks-libev/shadowsocks-libev.mk

package/Config.in +1 -0

index ecee493..1427665 100644
@@ -1846,6 +1846,7 @@ endif
 	source "package/samba4/Config.in"
 	source "package/sconeserver/Config.in"
 	source "package/ser2net/Config.in"
+        source "package/shadowsocks-libev/Config.in"

Indentation should be with tabs.

Similar problems exist elsewhere as well. Please use the utils/check-package
script to find such mistakes.

Quoted 9 lines

package/Config.in +0 -0

 	source "package/shairport-sync/Config.in"
 	source "package/shellinabox/Config.in"
 	source "package/smcroute/Config.in"

package/shadowsocks-libev/Config.in new file +0 -0

new file mode 100644
index 0000000..78fd35a

package/shadowsocks-libev/Config.in line 7

Quoted 7 lines

package/shadowsocks-libev/Config.in new file +7 -0

@@ -0,0 +1,12 @@
+config BR2_PACKAGE_SHADOWSOCKS_LIBEV
+        bool "shadowsocks-libev"
+        select BR2_PACKAGE_LIBSODIUM
+        select BR2_PACKAGE_MBEDTLS
+        select BR2_PACKAGE_PCRE
+        select BR2_PACKAGE_C_ARES
+        select BR2_PACKAGE_LIBEV

Please keep the select lines alphabetical. So c-ares should be first.

Quoted 11 lines

package/shadowsocks-libev/Config.in new file +5 -0

+        help
+          Shadowsocks-libev is a lightweight secured SOCKS5 proxy for
+          embedded devices and low-end boxes.
+
+          https://github.com/shadowsocks/shadowsocks-libev

package/shadowsocks-libev/shadowsocks-libev.mk new file +0 -0

new file mode 100644
index 0000000..1c7f76a

package/shadowsocks-libev/shadowsocks-libev.mk line 3

Quoted 3 lines

package/shadowsocks-libev/shadowsocks-libev.mk new file +3 -0
@@ -0,0 +1,20 @@
+################################################################################
+#
+# SHADOWSOCKS_LIBEV

This should be lower case.

package/shadowsocks-libev/shadowsocks-libev.mk line 8

Quoted 5 lines

package/shadowsocks-libev/shadowsocks-libev.mk new file +5 -0

+#
+################################################################################
+
+SHADOWSOCKS_LIBEV_VERSION = 3.1.3
+SHADOWSOCKS_LIBEV_SOURCE = shadowsocks-libev-$(SHADOWSOCKS_LIBEV_VERSION).tar.gz

This is the default so you can omit it.

package/shadowsocks-libev/shadowsocks-libev.mk line 10

Quoted 2 lines

package/shadowsocks-libev/shadowsocks-libev.mk new file +2 -0

+SHADOWSOCKS_LIBEV_SITE = https://github.com/shadowsocks/shadowsocks-libev/releases/download/v$(SHADOWSOCKS_LIBEV_VERSION)
+SHADOWSOCKS_LIBEV_LICENSE = GPLv3

Use SPDX tags, so GPL-3.0.

It looks to me like it has 'or later' everywhere, so GPL-3.0+.

It looks like it includes additional libraries under different licenses. So it
should be (I think, please check)

SHADOWSOCKS_LIBEV_LICENSE = GPL-3.0+, BSD-2-Clause (libbloom), \
BSD-3-Clause (libcork, libipset)

Note that murmur2 is public domain and doesn't need to be mentioned.

Also the LICENSE_FILES should immediately follow it, and include the license
files for all of these:

SHADOWSOCKS_LIBEV_LICENSE_FILES = COPYING libbloom/COPYING libcork/COPYING

(libipset is a bit problematic because it doesn't have a license file in the tarball. The git repo does have it, though, and it's identical to the one lin libcork as far as I can tell.)

Also please add hashes for all these files.

package/shadowsocks-libev/shadowsocks-libev.mk line 11

Quoted 1 line

package/shadowsocks-libev/shadowsocks-libev.mk new file +1 -0
+SHADOWSOCKS_LIBEV_DEPENDENCIES = host-pkgconf

You need to specify all build dependencies here, alphabetically. So:

SHADOWSOCKS_LIBEV_DEPENDENCIES = host-pkgconf c-ares libev libsodium mbedtls pcre

package/shadowsocks-libev/shadowsocks-libev.mk line 19

Quoted 8 lines

package/shadowsocks-libev/shadowsocks-libev.mk new file +8 -0

+SHADOWSOCKS_LIBEV_LICENSE_FILES = COPYING
+SHADOWSOCKS_LIBEV_INSTALL_STAGING = YES
+SHADOWSOCKS_LIBEV_CONF_ENV = PCRECONFIG=$(STAGING_DIR)/usr/bin/pcre-config
+SHADOWSOCKS_LIBEV_DEPENDENCIES += pcre
+SHADOWSOCKS_LIBEV_CONF_OPTS = --disable-documentation --with-pcre=$(STAGING_DIR)/usr/bin/
+
+$(eval $(autotools-package))
+$(eval $(host-autotools-package))

You should only add a host version of the package if it is needed for something.

Regards,
Arnout

Signature · 6 lines

Arnout Vandecappelle                          arnout at mind be
Senior Embedded Software Architect            +32-16-286500
Essensium/Mind                                http://www.mind.be
G.Geenslaan 9, 3001 Leuven, Belgium           BE 872 984 063 RPR Leuven
LinkedIn profile: http://www.linkedin.com/in/arnoutvandecappelle
GPG fingerprint:  7493 020B C7E3 8618 8DEC 222C 82EB F404 F9AC 0DDF

xu min

author

2018-05-29 07:02 UTC #2 lore raw

PATCH 1/1 Add new packge Shadowsocks-libev v3.1.3

Hi Arnout,

Thank you so much for your help. This is my first contributions. I think I fixed all the problem. My new submit is here:
https://patchwork.ozlabs.org/patch/921864/
Thanks.

MinXu

Quoted 156 lines · Arnout Vandecappelle

Hi Min,
Thank you for your contributions. There are several problems with your
patch,
could you fix them and resubmit?
First of all, the subject line should be:
shadowsocks-libev: new package
Quoted 5 lines · Min Xu
Signed-off-by Min Xu <[email protected]>
---
 package/Config.in                              |  1 +
 package/shadowsocks-libev/Config.in            | 12 ++++++++++++
 package/shadowsocks-libev/shadowsocks-libev.mk | 20
++++++++++++++++++++
Please also add a hash file, containing a hash for the tarball and for all
license files.
package/Config.in endif · line 1849
Quoted 13 lines
 3 files changed, 33 insertions(+)
 create mode 100644 package/shadowsocks-libev/Config.in
 create mode 100644 package/shadowsocks-libev/shadowsocks-libev.mk
package/Config.in +1 -0
index ecee493..1427665 100644
@@ -1846,6 +1846,7 @@ endif
      source "package/samba4/Config.in"
      source "package/sconeserver/Config.in"
      source "package/ser2net/Config.in"
+        source "package/shadowsocks-libev/Config.in"
Indentation should be with tabs.
Similar problems exist elsewhere as well. Please use the
utils/check-package
script to find such mistakes.
Review
Quoted 4 lines
package/Config.in +0 -0
      source "package/shairport-sync/Config.in"
      source "package/shellinabox/Config.in"
      source "package/smcroute/Config.in"
(quoted diff) +0 -0
b/package/shadowsocks-libev/Config.in
package/shadowsocks-libev/Config.in line 7
Quoted 12 lines
new file mode 100644
index 0000000..78fd35a
package/shadowsocks-libev/Config.in new file +7 -0
@@ -0,0 +1,12 @@
+config BR2_PACKAGE_SHADOWSOCKS_LIBEV
+        bool "shadowsocks-libev"
+        select BR2_PACKAGE_LIBSODIUM
+        select BR2_PACKAGE_MBEDTLS
+        select BR2_PACKAGE_PCRE
+        select BR2_PACKAGE_C_ARES
+        select BR2_PACKAGE_LIBEV
Please keep the select lines alphabetical. So c-ares should be first.
Review
Quoted 6 lines
package/shadowsocks-libev/Config.in new file +5 -0
+        help
+          Shadowsocks-libev is a lightweight secured SOCKS5 proxy for
+          embedded devices and low-end boxes.
+
+          https://github.com/shadowsocks/shadowsocks-libev
(quoted diff) +0 -0
b/package/shadowsocks-libev/shadowsocks-libev.mk
package/shadowsocks-libev/shadowsocks-libev.mk line 1
Quoted 6 lines
new file mode 100644
index 0000000..1c7f76a
package/shadowsocks-libev/shadowsocks-libev.mk new file +1 -0
@@ -0,0 +1,20 @@
+###########################################################
#####################
package/shadowsocks-libev/shadowsocks-libev.mk line 3
Quoted 2 lines
package/shadowsocks-libev/shadowsocks-libev.mk new file +2 -0
+#
+# SHADOWSOCKS_LIBEV
This should be lower case.
package/shadowsocks-libev/shadowsocks-libev.mk line 5
Quoted 2 lines
package/shadowsocks-libev/shadowsocks-libev.mk new file +2 -0
+#
+###########################################################
#####################
package/shadowsocks-libev/shadowsocks-libev.mk
Quoted 3 lines
package/shadowsocks-libev/shadowsocks-libev.mk new file +3 -0
+
+SHADOWSOCKS_LIBEV_VERSION = 3.1.3
+SHADOWSOCKS_LIBEV_SOURCE = shadowsocks-libev-$(
SHADOWSOCKS_LIBEV_VERSION).tar.gz
This is the default so you can omit it.
package/shadowsocks-libev/shadowsocks-libev.mk line 9
Quoted 1 line
package/shadowsocks-libev/shadowsocks-libev.mk new file +1 -0
+SHADOWSOCKS_LIBEV_SITE = https://github.com/
shadowsocks/shadowsocks-libev/releases/download/v$( SHADOWSOCKS_LIBEV_VERSION)
package/shadowsocks-libev/shadowsocks-libev.mk line 10
Quoted 1 line
package/shadowsocks-libev/shadowsocks-libev.mk new file +1 -0
+SHADOWSOCKS_LIBEV_LICENSE = GPLv3
Use SPDX tags, so GPL-3.0.
It looks to me like it has 'or later' everywhere, so GPL-3.0+.
It looks like it includes additional libraries under different licenses.
So it
should be (I think, please check)
SHADOWSOCKS_LIBEV_LICENSE = GPL-3.0+, BSD-2-Clause (libbloom), \
BSD-3-Clause (libcork, libipset)
Note that murmur2 is public domain and doesn't need to be mentioned.
Also the LICENSE_FILES should immediately follow it, and include the
license
files for all of these:
SHADOWSOCKS_LIBEV_LICENSE_FILES = COPYING libbloom/COPYING libcork/COPYING
(libipset is a bit problematic because it doesn't have a license file in the
tarball. The git repo does have it, though, and it's identical to the one lin
libcork as far as I can tell.)
Also please add hashes for all these files.
package/shadowsocks-libev/shadowsocks-libev.mk line 11
Quoted 1 line
package/shadowsocks-libev/shadowsocks-libev.mk new file +1 -0
+SHADOWSOCKS_LIBEV_DEPENDENCIES = host-pkgconf
You need to specify all build dependencies here, alphabetically. So:
SHADOWSOCKS_LIBEV_DEPENDENCIES = host-pkgconf c-ares libev libsodium mbedtls pcre
package/shadowsocks-libev/shadowsocks-libev.mk
Quoted 3 lines
package/shadowsocks-libev/shadowsocks-libev.mk new file +3 -0
+SHADOWSOCKS_LIBEV_LICENSE_FILES = COPYING
+SHADOWSOCKS_LIBEV_INSTALL_STAGING = YES
+SHADOWSOCKS_LIBEV_CONF_ENV = PCRECONFIG=$(STAGING_DIR)/usr/
bin/pcre-config
package/shadowsocks-libev/shadowsocks-libev.mk line 16
Quoted 2 lines
package/shadowsocks-libev/shadowsocks-libev.mk new file +2 -0
+SHADOWSOCKS_LIBEV_DEPENDENCIES += pcre
+SHADOWSOCKS_LIBEV_CONF_OPTS = --disable-documentation
--with-pcre=$(STAGING_DIR)/usr/bin/
package/shadowsocks-libev/shadowsocks-libev.mk line 19
Quoted 3 lines
package/shadowsocks-libev/shadowsocks-libev.mk new file +3 -0
+
+$(eval $(autotools-package))
+$(eval $(host-autotools-package))
You should only add a host version of the package if it is needed for
something.
Regards,
Arnout
--
Arnout Vandecappelle                          arnout at mind be
Senior Embedded Software Architect            +32-16-286500
Essensium/Mind                                http://www.mind.be
G.Geenslaan 9, 3001 Leuven, Belgium           BE 872 984 063 RPR Leuven
LinkedIn profile: http://www.linkedin.com/in/arnoutvandecappelle
GPG fingerprint:  7493 020B C7E3 8618 8DEC 222C 82EB F404 F9AC 0DDF

Signature · 6 lines

*Best Regards*

*XuMin's Ready?*
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.busybox.net/pipermail/buildroot/attachments/20180529/7fc7a49c/attachment.html>

xu min

author

2018-05-30 07:50 UTC #3 lore raw

PATCH 1/1 Add new packge Shadowsocks-libev v3.1.3

Hi Arnout,

I just notice my last submit still miss libbloom/COPYING libcork/COPYING, ipset/COPYING. Please discard my last submit. I'll resubmit a new one tomorrow. Sorry about that.

MinXu

Quoted 178 lines · xu min

Hi Arnout,
Thank you so much for your help. This is my first contributions. I think I fixed all the problem. My new submit is here: https://patchwork.
ozlabs.org/patch/921864/
Thanks.
MinXu
Quoted 149 lines · Arnout Vandecappelle
Hi Min,
Thank you for your contributions. There are several problems with your
patch,
could you fix them and resubmit?
First of all, the subject line should be:
shadowsocks-libev: new package
Quoted 5 lines · Min Xu
Signed-off-by Min Xu <[email protected]>
---
 package/Config.in                              |  1 +
 package/shadowsocks-libev/Config.in            | 12 ++++++++++++
 package/shadowsocks-libev/shadowsocks-libev.mk | 20
++++++++++++++++++++
Please also add a hash file, containing a hash for the tarball and for
all
license files.
package/Config.in endif · line 1849
Quoted 13 lines
 3 files changed, 33 insertions(+)
 create mode 100644 package/shadowsocks-libev/Config.in
 create mode 100644 package/shadowsocks-libev/shadowsocks-libev.mk
package/Config.in +1 -0
index ecee493..1427665 100644
@@ -1846,6 +1846,7 @@ endif
      source "package/samba4/Config.in"
      source "package/sconeserver/Config.in"
      source "package/ser2net/Config.in"
+        source "package/shadowsocks-libev/Config.in"
Indentation should be with tabs.
Similar problems exist elsewhere as well. Please use the
utils/check-package
script to find such mistakes.
Review
Quoted 4 lines
package/Config.in +0 -0
      source "package/shairport-sync/Config.in"
      source "package/shellinabox/Config.in"
      source "package/smcroute/Config.in"
(quoted diff) +0 -0
b/package/shadowsocks-libev/Config.in
package/shadowsocks-libev/Config.in line 7
Quoted 12 lines
new file mode 100644
index 0000000..78fd35a
package/shadowsocks-libev/Config.in new file +7 -0
@@ -0,0 +1,12 @@
+config BR2_PACKAGE_SHADOWSOCKS_LIBEV
+        bool "shadowsocks-libev"
+        select BR2_PACKAGE_LIBSODIUM
+        select BR2_PACKAGE_MBEDTLS
+        select BR2_PACKAGE_PCRE
+        select BR2_PACKAGE_C_ARES
+        select BR2_PACKAGE_LIBEV
Please keep the select lines alphabetical. So c-ares should be first.
Review
Quoted 6 lines
package/shadowsocks-libev/Config.in new file +5 -0
+        help
+          Shadowsocks-libev is a lightweight secured SOCKS5 proxy for
+          embedded devices and low-end boxes.
+
+          https://github.com/shadowsocks/shadowsocks-libev
(quoted diff) +0 -0
b/package/shadowsocks-libev/shadowsocks-libev.mk
package/shadowsocks-libev/shadowsocks-libev.mk line 1
Quoted 6 lines
new file mode 100644
index 0000000..1c7f76a
package/shadowsocks-libev/shadowsocks-libev.mk new file +1 -0
@@ -0,0 +1,20 @@
+###########################################################
#####################
package/shadowsocks-libev/shadowsocks-libev.mk line 3
Quoted 2 lines
package/shadowsocks-libev/shadowsocks-libev.mk new file +2 -0
+#
+# SHADOWSOCKS_LIBEV
This should be lower case.
package/shadowsocks-libev/shadowsocks-libev.mk line 5
Quoted 2 lines
package/shadowsocks-libev/shadowsocks-libev.mk new file +2 -0
+#
+###########################################################
#####################
package/shadowsocks-libev/shadowsocks-libev.mk
Quoted 3 lines
package/shadowsocks-libev/shadowsocks-libev.mk new file +3 -0
+
+SHADOWSOCKS_LIBEV_VERSION = 3.1.3
+SHADOWSOCKS_LIBEV_SOURCE = shadowsocks-libev-$(SHADOWSOCK
S_LIBEV_VERSION).tar.gz
This is the default so you can omit it.
package/shadowsocks-libev/shadowsocks-libev.mk line 9
Quoted 1 line
package/shadowsocks-libev/shadowsocks-libev.mk new file +1 -0
+SHADOWSOCKS_LIBEV_SITE = https://github.com/shadowsocks
/shadowsocks-libev/releases/download/v$(SHADOWSOCKS_LIBEV_VERSION)
package/shadowsocks-libev/shadowsocks-libev.mk line 10
Quoted 1 line
package/shadowsocks-libev/shadowsocks-libev.mk new file +1 -0
+SHADOWSOCKS_LIBEV_LICENSE = GPLv3
Use SPDX tags, so GPL-3.0.
It looks to me like it has 'or later' everywhere, so GPL-3.0+.
It looks like it includes additional libraries under different licenses.
So it
should be (I think, please check)
SHADOWSOCKS_LIBEV_LICENSE = GPL-3.0+, BSD-2-Clause (libbloom), \
BSD-3-Clause (libcork, libipset)
Note that murmur2 is public domain and doesn't need to be mentioned.
Also the LICENSE_FILES should immediately follow it, and include the
license
files for all of these:
SHADOWSOCKS_LIBEV_LICENSE_FILES = COPYING libbloom/COPYING libcork/COPYING
(libipset is a bit problematic because it doesn't have a license file in the
tarball. The git repo does have it, though, and it's identical to the one lin
libcork as far as I can tell.)
Also please add hashes for all these files.
package/shadowsocks-libev/shadowsocks-libev.mk line 11
Quoted 1 line
package/shadowsocks-libev/shadowsocks-libev.mk new file +1 -0
+SHADOWSOCKS_LIBEV_DEPENDENCIES = host-pkgconf
You need to specify all build dependencies here, alphabetically. So:
SHADOWSOCKS_LIBEV_DEPENDENCIES = host-pkgconf c-ares libev libsodium mbedtls pcre
package/shadowsocks-libev/shadowsocks-libev.mk
Quoted 3 lines
package/shadowsocks-libev/shadowsocks-libev.mk new file +3 -0
+SHADOWSOCKS_LIBEV_LICENSE_FILES = COPYING
+SHADOWSOCKS_LIBEV_INSTALL_STAGING = YES
+SHADOWSOCKS_LIBEV_CONF_ENV = PCRECONFIG=$(STAGING_DIR)/usr/
bin/pcre-config
package/shadowsocks-libev/shadowsocks-libev.mk line 16
Quoted 2 lines
package/shadowsocks-libev/shadowsocks-libev.mk new file +2 -0
+SHADOWSOCKS_LIBEV_DEPENDENCIES += pcre
+SHADOWSOCKS_LIBEV_CONF_OPTS = --disable-documentation
--with-pcre=$(STAGING_DIR)/usr/bin/
package/shadowsocks-libev/shadowsocks-libev.mk line 19
Quoted 3 lines
package/shadowsocks-libev/shadowsocks-libev.mk new file +3 -0
+
+$(eval $(autotools-package))
+$(eval $(host-autotools-package))
You should only add a host version of the package if it is needed for
something.
Regards,
Arnout
Quoted 8 lines
--
Arnout Vandecappelle                          arnout at mind be
Senior Embedded Software Architect            +32-16-286500
Essensium/Mind                                http://www.mind.be
G.Geenslaan 9, 3001 Leuven, Belgium           BE 872 984 063 RPR Leuven
LinkedIn profile: http://www.linkedin.com/in/arnoutvandecappelle
GPG fingerprint:  7493 020B C7E3 8618 8DEC 222C 82EB F404 F9AC 0DDF
--
*Best Regards*
*XuMin's Ready?*

Signature · 6 lines

*Best Regards*

*XuMin's Ready?*
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.busybox.net/pipermail/buildroot/attachments/20180530/d0690684/attachment.html>