Skip to contentSkip to conversation

mach-snapdragon: increase size of malloc pool

PATCH New Ramon Fried 2 participants 2 messages May 28, 2018 – May 30, 2018

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH v2 1/1 mach-snapdragon: increase size of malloc pool

Pool size must be increased to support new additionals drivers.

---
v2: increase pool size to 0x200 as suggested by Tom.

 arch/arm/mach-snapdragon/Kconfig | 6 ++++++
 1 file changed, 6 insertions(+)
arch/arm/mach-snapdragon/Kconfig +6 -0
index 2588635730..57d3fcd55a 100644
@@ -3,6 +3,12 @@ if ARCH_SNAPDRAGON
 config SYS_SOC
 	default "snapdragon"
 
+config SYS_MALLOC_F_LEN
+	default 0x2000
+
+config SPL_SYS_MALLOC_F_LEN
+	default 0x2000
+
 choice
 	prompt "Snapdragon board select"
 
Signature · 1 line
2.17.0
#1 lore raw

PATCH v2 1/1 mach-snapdragon: increase size of malloc pool

Quoted 4 lines · Ramon Fried

Pool size must be increased to support new additionals drivers.

Applied to u-boot/master, thanks!

Signature · 8 lines
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20180529/a9c4ba37/attachment.sig>