Skip to contentSkip to conversation

db820c: add dummy clock for uart node

PATCH In review Ramon Fried 2 participants 2 messages May 28, 2018 – May 30, 2018 Arm (32-bit)

lore
Share & tools
lore

Ramon Fried

author
#0 lore raw

PATCH 1/1 db820c: add dummy clock for uart node

The missing clock causes serial_msm driver probe to fail. Added a dummy node so the probe succeeds, as the clock init currently in db820c is empty.

Fixes 11d59fe5374a ("serial: serial_msm: fail probe if settings clocks fails")
Signed-off-by Ramon Fried <[email protected]>
---
 arch/arm/dts/dragonboard820c.dts | 1 +
 1 file changed, 1 insertion(+)
arch/arm/dts/dragonboard820c.dts +1 -0
index 7bfae1c426..7457d7b7e3 100644
@@ -50,6 +50,7 @@
 		blsp2_uart1: serial at 75b0000 {
 			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
 			reg = <0x75b0000 0x1000>;
+			clock = <&gcc 4>;
 		};
 
 		sdhc2: sdhci at 74a4900 {
Signature · 1 line
2.17.0
#1 lore raw
Quoted 7 lines · Ramon Fried

The missing clock causes serial_msm driver probe to fail. Added a dummy node so the probe succeeds, as the clock init currently in db820c is empty.

Fixes 11d59fe5374a ("serial: serial_msm: fail probe if settings clocks fails")
Signed-off-by Ramon Fried <[email protected]>

Applied to u-boot/master, thanks!

Signature · 8 lines
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20180529/82f6ca97/attachment.sig>