Skip to contentSkip to conversation

autofs: make autofs4 and autofs mutually exclusive

PATCH In review Arnd Bergmann 3 participants 8 messages May 29, 2018 – Jun 1, 2018

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 autofs: make autofs4 and autofs mutually exclusive

The autofs4 implementation is just a redirect to autofs now, but that also means we can't have both built into the same kernel:

fs/autofs/inode.o: In function `autofs_new_ino':
inode.c:(.text+0x1b8): multiple definition of autofs_new_ino' fs/autofs/inode.o:inode.c:(.text+0x1b8): first defined here fs/autofs/inode.o: In function autofs_clean_ino':
inode.c:(.text+0x288): multiple definition of `autofs_clean_ino'

There is also a problem with trying to build both in parallel, which leads to two 'make' processes writing to the same fs/autofs/.*.o.cmd file, causing corruption that manifests like

fs/autofs4/../autofs/.expire.o.cmd:679: *** missing separator. Stop.

Making AUTOFS4_FS depend on AUTOFS_FS being disabled should avoid all configurations that run into either issue.

Fixes mmotm ("autofs: update fs/autofs4/Makefile")
---
 fs/autofs4/Kconfig | 1 +
 1 file changed, 1 insertion(+)
fs/autofs4/Kconfig +1 -0
index 53bc592a250d..eccf673c6c8c 100644
@@ -1,5 +1,6 @@
 config AUTOFS4_FS
 	tristate "Kernel automounter version 4 support (also supports v3 and v5)"
+	depends on AUTOFS_FS=n
 	default n
 	help
 	  The automounter is a tool to automatically mount remote file systems
Signature · 1 line
2.9.0
maintainer
#1 lore raw
Quoted 9 lines · Arnd Bergmann

The autofs4 implementation is just a redirect to autofs now, but that also means we can't have both built into the same kernel:

fs/autofs/inode.o: In function `autofs_new_ino':
inode.c:(.text+0x1b8): multiple definition of autofs_new_ino' fs/autofs/inode.o:inode.c:(.text+0x1b8): first defined here fs/autofs/inode.o: In function autofs_clean_ino':
inode.c:(.text+0x288): multiple definition of `autofs_clean_ino'

Quoted 8 lines

There is also a problem with trying to build both in parallel, which leads to two 'make' processes writing to the same fs/autofs/.*.o.cmd file, causing corruption that manifests like

fs/autofs4/../autofs/.expire.o.cmd:679: *** missing separator. Stop.

Making AUTOFS4_FS depend on AUTOFS_FS being disabled should avoid all configurations that run into either issue.

Thanks Arnd and this adds support that my analysis of build problems is accurate.

I posted a similar patch on May 21 which also added a NOTE to fs/autofs4/Kconfig saying pretty much what you've said.
https://patchwork.kernel.org/patch/10413823/

I recommend using my patch so that anyone that's surprised by the .config change has a chance of finding an explanation somewhere, ;)

Not only is the change needed, but to preserve bisection it needs to be folded into the original patch titled:
autofs: create autofs Kconfig and Makefile

otherwise build test robots will still see this problem between build testing after "autofs: create autofs Kconfig and Makefile" and before this change is applied.

Folding in the change is my current recommendation to Andrew. Hopefully that will fix the problem.

Any further thoughts are of course welcome.

Quoted 20 lines
Fixes mmotm ("autofs: update fs/autofs4/Makefile")
---
 fs/autofs4/Kconfig | 1 +
 1 file changed, 1 insertion(+)
fs/autofs4/Kconfig +0 -0
index 53bc592a250d..eccf673c6c8c 100644
@@ -1,5 +1,6 @@
 config AUTOFS4_FS
 	tristate "Kernel automounter version 4 support (also supports v3 and

v5)"

fs/autofs4/Kconfig +1 -0
+	depends on AUTOFS_FS=n
 	default n
 	help
 	  The automounter is a tool to automatically mount remote file

systems

#2 lore raw
Quoted 33 lines · Ian Kent
Quoted 9 lines · Arnd Bergmann

The autofs4 implementation is just a redirect to autofs now, but that also means we can't have both built into the same kernel:

fs/autofs/inode.o: In function `autofs_new_ino':
inode.c:(.text+0x1b8): multiple definition of autofs_new_ino' fs/autofs/inode.o:inode.c:(.text+0x1b8): first defined here fs/autofs/inode.o: In function autofs_clean_ino':
inode.c:(.text+0x288): multiple definition of `autofs_clean_ino'

Quoted 8 lines

There is also a problem with trying to build both in parallel, which leads to two 'make' processes writing to the same fs/autofs/.*.o.cmd file, causing corruption that manifests like

fs/autofs4/../autofs/.expire.o.cmd:679: *** missing separator. Stop.

Making AUTOFS4_FS depend on AUTOFS_FS being disabled should avoid all configurations that run into either issue.

Thanks Arnd and this adds support that my analysis of build problems is accurate.

I posted a similar patch on May 21 which also added a NOTE to fs/autofs4/Kconfig saying pretty much what you've said.
https://patchwork.kernel.org/patch/10413823/

I recommend using my patch so that anyone that's surprised by the .config change has a chance of finding an explanation somewhere, ;)

Not only is the change needed, but to preserve bisection it needs to be folded into the original patch titled:
autofs: create autofs Kconfig and Makefile

Quoted 6 lines

otherwise build test robots will still see this problem between build testing after "autofs: create autofs Kconfig and Makefile" and before this change is applied.

Folding in the change is my current recommendation to Andrew. Hopefully that will fix the problem.

Yes, looks good.

Quoted 1 line

Any further thoughts are of course welcome.

I actually had an alternative approach that I tried out successfully but discarded as being too different from the original code. Just for reference, this one would work as well, and allow both to be compiled together. The version you posted is probably better.

fs/autofs/autofs_i.h +2 -0
index 9400a9f6318a..5a361f5273a1 100644
@@ -6,6 +6,8 @@
  * the terms of the GNU General Public License, version 2, or at your
  * option, any later version, incorporated herein by reference.
  */
+#ifndef __AUTOFS_H
+#define __AUTOFS_H
 
 /* Internal header file for autofs */
 
@@ -271,3 +273,5 @@ static inline void autofs_del_expiring(struct

dentry *dentry)
}

void autofs_kill_sb(struct super_block *);
+
+#endif /* __AUTOFS_H */

fs/autofs4/Makefile +0 -4
index 417dd726d9ef..5fc0a28d656d 100644
@@ -3,7 +3,3 @@
 #
 
 obj-$(CONFIG_AUTOFS4_FS) += autofs4.o
-
-autofs4-objs := ../autofs/init.o ../autofs/inode.o ../autofs/root.o \
-       ../autofs/symlink.o ../autofs/waitq.o ../autofs/expire.o \
-       ../autofs/dev-ioctl.o
fs/autofs4/autofs4.c new file +7 -0
new file mode 100644
index 000000000000..a76066aa9f27
@@ -0,0 +1,7 @@
+#include "../autofs/init.c"
+#include "../autofs/inode.c"
+#include "../autofs/root.c"
+#include "../autofs/symlink.c"
+#include "../autofs/waitq.c"
+#include "../autofs/expire.c"
+#include "../autofs/dev-ioctl.c"
maintainer
#3 lore raw
Quoted 41 lines · Arnd Bergmann
Quoted 33 lines · Ian Kent
Quoted 9 lines · Arnd Bergmann

The autofs4 implementation is just a redirect to autofs now, but that also means we can't have both built into the same kernel:

fs/autofs/inode.o: In function `autofs_new_ino':
inode.c:(.text+0x1b8): multiple definition of autofs_new_ino' fs/autofs/inode.o:inode.c:(.text+0x1b8): first defined here fs/autofs/inode.o: In function autofs_clean_ino':
inode.c:(.text+0x288): multiple definition of `autofs_clean_ino'

Quoted 8 lines

There is also a problem with trying to build both in parallel, which leads to two 'make' processes writing to the same fs/autofs/.*.o.cmd file, causing corruption that manifests like

fs/autofs4/../autofs/.expire.o.cmd:679: *** missing separator. Stop.

Making AUTOFS4_FS depend on AUTOFS_FS being disabled should avoid all configurations that run into either issue.

Thanks Arnd and this adds support that my analysis of build problems is accurate.

I posted a similar patch on May 21 which also added a NOTE to fs/autofs4/Kconfig saying pretty much what you've said.
https://patchwork.kernel.org/patch/10413823/

I recommend using my patch so that anyone that's surprised by the .config change has a chance of finding an explanation somewhere, ;)

Not only is the change needed, but to preserve bisection it needs to be folded into the original patch titled:
autofs: create autofs Kconfig and Makefile

Quoted 6 lines

otherwise build test robots will still see this problem between build testing after "autofs: create autofs Kconfig and Makefile" and before this change is applied.

Folding in the change is my current recommendation to Andrew. Hopefully that will fix the problem.

Quoted 8 lines

Yes, looks good.

Quoted 1 line

Any further thoughts are of course welcome.

I actually had an alternative approach that I tried out successfully but discarded as being too different from the original code. Just for reference, this one would work as well, and allow both to be compiled together. The version you posted is probably better.

It's an attractive option but the problem is both implement the autofs file system.

I've always thought you can't register the same file system at the same time from two distinct sources.

If you're careful and compile each only as a module you could do it.

But many configurations have autofs compiled built-in because of the auto-loading problems that arose back when there was an autofs fs module as well as an autofs fs module present in the autofs4 directory.

Maybe it would actually work with one winning over the other but I'd prefer not to go that way.

It will be gone in two subsequent releases if it gets merged and no changes to the retained code will be needed with this approach.

Quoted 48 lines
fs/autofs/autofs_i.h +4 -0
index 9400a9f6318a..5a361f5273a1 100644
@@ -6,6 +6,8 @@
  * the terms of the GNU General Public License, version 2, or at your
  * option, any later version, incorporated herein by reference.
  */
+#ifndef __AUTOFS_H
+#define __AUTOFS_H
 
 /* Internal header file for autofs */
 
@@ -271,3 +273,5 @@ static inline void autofs_del_expiring(struct
 dentry *dentry)
 }
 
 void autofs_kill_sb(struct super_block *);
+
+#endif /* __AUTOFS_H */
fs/autofs4/Makefile +0 -4
index 417dd726d9ef..5fc0a28d656d 100644
@@ -3,7 +3,3 @@
 #
 
 obj-$(CONFIG_AUTOFS4_FS) += autofs4.o
-
-autofs4-objs := ../autofs/init.o ../autofs/inode.o ../autofs/root.o \
-       ../autofs/symlink.o ../autofs/waitq.o ../autofs/expire.o \
-       ../autofs/dev-ioctl.o
fs/autofs4/autofs4.c new file +7 -0
new file mode 100644
index 000000000000..a76066aa9f27
@@ -0,0 +1,7 @@
+#include "../autofs/init.c"
+#include "../autofs/inode.c"
+#include "../autofs/root.c"
+#include "../autofs/symlink.c"
+#include "../autofs/waitq.c"
+#include "../autofs/expire.c"
+#include "../autofs/dev-ioctl.c"
Tested-by Randy Dunlap
#4 lore raw
Quoted 17 lines · On Wed, 30 May 2018 17:18:55 +0800 Ian Kent <[email protected]> wrote:
Quoted 4 lines

I actually had an alternative approach that I tried out successfully but discarded as being too different from the original code. Just for reference, this one would work as well, and allow both to be compiled together. The version you posted is probably better.

It's an attractive option but the problem is both implement the autofs file system.

I've always thought you can't register the same file system at the same time from two distinct sources.

If you're careful and compile each only as a module you could do it.

But many configurations have autofs compiled built-in because of the auto-loading problems that arose back when there was an autofs fs module as well as an autofs fs module present in the autofs4 directory.

Quoted 5 lines

Maybe it would actually work with one winning over the other but I'd prefer not to go that way.

It will be gone in two subsequent releases if it gets merged and no changes to the retained code will be needed with this approach.

I'm losing the plot here. Can you please confirm that this is the patch we want?

From: Ian Kent <[email protected]>
Subject: autofs: update fs/autofs4/Kconfig

Update Kconfig and add a depricated warning.

---

 fs/autofs4/Kconfig |   42 +++++++++++++++++++++++++++++++-----------
 1 file changed, 31 insertions(+), 11 deletions(-)
fs/autofs4/Kconfig renamed from fs/autofs4/Kconfig~autofs-update-fs-autofs4-kconfig +31 -11
diff -puN fs/autofs4/Kconfig~autofs-update-fs-autofs4-kconfig fs/autofs4/Kconfig
@@ -1,5 +1,7 @@
 config AUTOFS4_FS
-	tristate "Kernel automounter version 4 support (also supports v3)"
+	tristate "Kernel automounter version 4 support (also supports v3 and v5)"
+	default n
+	depends on AUTOFS_FS = n
 	help
 	  The automounter is a tool to automatically mount remote file systems
 	  on demand. This implementation is partially kernel-based to reduce
@@ -7,14 +9,32 @@ config AUTOFS4_FS
 	  automounter (amd), which is a pure user space daemon.
 
 	  To use the automounter you need the user-space tools from
-	  <https://www.kernel.org/pub/linux/daemons/autofs/v4/>; you also
-	  want to answer Y to "NFS file system support", below.
+	  <https://www.kernel.org/pub/linux/daemons/autofs/>; you also want
+	  to answer Y to "NFS file system support", below.
 
-	  To compile this support as a module, choose M here: the module will be
-	  called autofs4.  You will need to add "alias autofs autofs4" to your
-	  modules configuration file.
-
-	  If you are not a part of a fairly large, distributed network or
-	  don't have a laptop which needs to dynamically reconfigure to the
-	  local network, you probably do not need an automounter, and can say
-	  N here.
+	  This module is in the process of being renamed from autofs4 to
+	  autofs. Since autofs is now the only module that provides the
+	  autofs file system the module is not version 4 specific.
+
+	  The autofs4 module is now built from the source located in
+	  fs/autofs. The autofs4 directory and its configuration entry
+	  will be removed two kernel versions from the inclusion of this
+	  change.
+
+	  Changes that will need to be made should be limited to:
+	  - source include statments should be changed from autofs_fs4.h to
+	    autofs_fs.h since these two header files have been merged.
+	  - user space scripts that manually load autofs4.ko should be
+	    changed to load autofs.ko. But since the module directory name
+	    and the module name are the same as the file system name there
+	    is no need to manually load module.
+	  - any "alias autofs autofs4" will need to be removed.
+
+	  Please configure AUTOFS_FS instead of AUTOFS4_FS from now on.
+
+	  NOTE: Since the modules autofs and autofs4 use the same file system
+		type name of "autofs" only one can be built. The "depends"
+		above will result in AUTOFS4_FS not appearing in .config for
+		any setting of AUTOFS_FS other than n and AUTOFS4_FS will
+		appear under the AUTOFS_FS entry otherwise which is intended
+		to draw attention to the module rename change.

_

maintainer
#5 lore raw
Quoted 19 lines · Andrew Morton
Quoted 17 lines · On Wed, 30 May 2018 17:18:55 +0800 Ian Kent <[email protected]> wrote:
Quoted 4 lines

I actually had an alternative approach that I tried out successfully but discarded as being too different from the original code. Just for reference, this one would work as well, and allow both to be compiled together. The version you posted is probably better.

It's an attractive option but the problem is both implement the autofs file system.

I've always thought you can't register the same file system at the same time from two distinct sources.

If you're careful and compile each only as a module you could do it.

But many configurations have autofs compiled built-in because of the auto-loading problems that arose back when there was an autofs fs module as well as an autofs fs module present in the autofs4 directory.

Quoted 8 lines
Quoted 5 lines

Maybe it would actually work with one winning over the other but I'd prefer not to go that way.

It will be gone in two subsequent releases if it gets merged and no changes to the retained code will be needed with this approach.

I'm losing the plot here. Can you please confirm that this is the patch we want?

Understandable.

This wasn't quite what I did and at the risk of confusing matters further I'll try and explain what I did and why.

I folded the change into the patch which created fs/autofs/Kconfig (autofs-create-autofs-kconfig-and-makefile.patch).

However doing what you're doing here should have the same effect as long as Kbuild is smart enough to work out that
"depends on AUTOFS_FS = n" doesn't apply when fs/autofs/Kconfig hasn't yet been created (by autofs-create-autofs-kconfig-and-makefile.patch).

The problem is that AUTOFS_FS=y might be still be present in .config (surviving after many years) causing the bisection problem.

That's why I thought it best to add the depends in fs/autofs4/Kconfig at the time fs/autofs/Kconfig is created rather than before that in autofs-update-fs-autofs4-makefile.patch, as is done here.

Let me check if Kbuild will do the right thing and get back to you.

Quoted 84 lines

From: Ian Kent <[email protected]>
Subject: autofs: update fs/autofs4/Kconfig

Update Kconfig and add a depricated warning.

luto.themaw.net

luto.themaw.net

---

 fs/autofs4/Kconfig |   42 +++++++++++++++++++++++++++++++-----------
 1 file changed, 31 insertions(+), 11 deletions(-)

diff -puN fs/autofs4/Kconfig~autofs-update-fs-autofs4-kconfig fs/autofs4/Kconfig

fs/autofs4/Kconfig renamed from fs/autofs4/Kconfig~autofs-update-fs-autofs4-kconfig +1 -1
@@ -1,5 +1,7 @@
 config AUTOFS4_FS
-	tristate "Kernel automounter version 4 support (also supports v3)"
+	tristate "Kernel automounter version 4 support (also supports v3 and

v5)"

fs/autofs4/Kconfig renamed from fs/autofs4/Kconfig~autofs-update-fs-autofs4-kconfig +2 -0
+	default n
+	depends on AUTOFS_FS = n
 	help
 	  The automounter is a tool to automatically mount remote file

systems

fs/autofs4/Kconfig renamed from fs/autofs4/Kconfig~autofs-update-fs-autofs4-kconfig +2 -3
 	  on demand. This implementation is partially kernel-based to reduce
@@ -7,14 +9,32 @@ config AUTOFS4_FS
 	  automounter (amd), which is a pure user space daemon.
 
 	  To use the automounter you need the user-space tools from
-	  <https://www.kernel.org/pub/linux/daemons/autofs/v4/>; you also
-	  want to answer Y to "NFS file system support", below.
+	  <https://www.kernel.org/pub/linux/daemons/autofs/>; you also want
+	  to answer Y to "NFS file system support", below.
 
-	  To compile this support as a module, choose M here: the module will

be

fs/autofs4/Kconfig renamed from fs/autofs4/Kconfig~autofs-update-fs-autofs4-kconfig +0 -1
-	  called autofs4.  You will need to add "alias autofs autofs4" to

your

fs/autofs4/Kconfig renamed from fs/autofs4/Kconfig~autofs-update-fs-autofs4-kconfig +26 -6
-	  modules configuration file.
-
-	  If you are not a part of a fairly large, distributed network or
-	  don't have a laptop which needs to dynamically reconfigure to the
-	  local network, you probably do not need an automounter, and can say
-	  N here.
+	  This module is in the process of being renamed from autofs4 to
+	  autofs. Since autofs is now the only module that provides the
+	  autofs file system the module is not version 4 specific.
+
+	  The autofs4 module is now built from the source located in
+	  fs/autofs. The autofs4 directory and its configuration entry
+	  will be removed two kernel versions from the inclusion of this
+	  change.
+
+	  Changes that will need to be made should be limited to:
+	  - source include statments should be changed from autofs_fs4.h to
+	    autofs_fs.h since these two header files have been merged.
+	  - user space scripts that manually load autofs4.ko should be
+	    changed to load autofs.ko. But since the module directory name
+	    and the module name are the same as the file system name there
+	    is no need to manually load module.
+	  - any "alias autofs autofs4" will need to be removed.
+
+	  Please configure AUTOFS_FS instead of AUTOFS4_FS from now on.
+
+	  NOTE: Since the modules autofs and autofs4 use the same file system
+		type name of "autofs" only one can be built. The "depends"
+		above will result in AUTOFS4_FS not appearing in .config for
+		any setting of AUTOFS_FS other than n and AUTOFS4_FS will
+		appear under the AUTOFS_FS entry otherwise which is intended
+		to draw attention to the module rename change.

_

maintainer
#6 lore raw
Quoted 42 lines · Ian Kent
Quoted 19 lines · Andrew Morton
Quoted 17 lines · On Wed, 30 May 2018 17:18:55 +0800 Ian Kent <[email protected]> wrote:
Quoted 4 lines

I actually had an alternative approach that I tried out successfully but discarded as being too different from the original code. Just for reference, this one would work as well, and allow both to be compiled together. The version you posted is probably better.

It's an attractive option but the problem is both implement the autofs file system.

I've always thought you can't register the same file system at the same time from two distinct sources.

If you're careful and compile each only as a module you could do it.

But many configurations have autofs compiled built-in because of the auto-loading problems that arose back when there was an autofs fs module as well as an autofs fs module present in the autofs4 directory.

Quoted 8 lines
Quoted 5 lines

Maybe it would actually work with one winning over the other but I'd prefer not to go that way.

It will be gone in two subsequent releases if it gets merged and no changes to the retained code will be needed with this approach.

I'm losing the plot here. Can you please confirm that this is the patch we want?

Understandable.

This wasn't quite what I did and at the risk of confusing matters further I'll try and explain what I did and why.

I folded the change into the patch which created fs/autofs/Kconfig (autofs-create-autofs-kconfig-and-makefile.patch).

However doing what you're doing here should have the same effect as long as Kbuild is smart enough to work out that
"depends on AUTOFS_FS = n" doesn't apply when fs/autofs/Kconfig hasn't yet been created (by autofs-create-autofs-kconfig-and-makefile.patch).

Quoted 8 lines

The problem is that AUTOFS_FS=y might be still be present in .config (surviving after many years) causing the bisection problem.

That's why I thought it best to add the depends in fs/autofs4/Kconfig at the time fs/autofs/Kconfig is created rather than before that in autofs-update-fs-autofs4-makefile.patch, as is done here.

Let me check if Kbuild will do the right thing and get back to you.

It appears that folding the "depends" update into the earlier patch will result in any CONFIG_AUTOFS* entries being silently removed from .config until the later patch that creates the new fs/autofs/Kconfig is applied.

Loosing the CONFIG_AUTOFS* settings could surprise someone doing a bisect.

To try and clear up the confusion I've taken the series from
http://www.ozlabs.org/~akpm/mmotm/series

#NEXT_PATCHES_START autofs autofs4-merge-auto_fsh-and-auto_fs4h.patch autofs4-use-autofs-instead-of-autofs4-everywhere.patch autofs-copy-autofs4-to-autofs.patch autofs-update-fs-autofs4-kconfig.patch autofs-update-fs-autofs4-kconfig-fix.patch <--the update was folded into this autofs-update-fs-autofs4-makefile.patch autofs-delete-fs-autofs4-source-files.patch autofs-create-autofs-kconfig-and-makefile.patch <-- when it should have been
<-- folded into this one
autofs-rename-autofs-documentation-files.patch autofs-use-autofs-instead-of-autofs4-in-documentation.patch autofs-update-maintainers-entry-for-autofs.patch
# autofs-comment-on-selinux-changes-needed-for-module-autoload.patch #
autofs-clean-up-includes.patch
#NEXT_PATCHES_END

And the patches from http://www.ozlabs.org/~akpm/mmotm/broken-out/,
folded "autofs-update-fs-autofs4-kconfig-fix.patch" into "autofs-create-autofs-kconfig-and-makefile.patch", and dropped the former fix patch.

I've uploaded the resulting quilt series to
http://people.redhat.com/~ikent/akpm-autofs-rename-series/
so you can check.

The resulting "autofs-create-autofs-kconfig-and-makefile.patch" should now look like (ha, of course that "Link:" is now wrong ...):

From: Ian Kent <[email protected]>
Subject: autofs: create autofs Kconfig and Makefile

Create Makefile and Kconfig for autofs module.

---

 fs/Kconfig         |    1 +
 fs/Makefile        |    1 +
 fs/autofs/Kconfig  |   20 ++++++++++++++++++++
 fs/autofs/Makefile |    7 +++++++
 4 files changed, 29 insertions(+)
fs/autofs/Kconfig new file +20 -0
@@ -0,0 +1,20 @@
+config AUTOFS_FS
+	tristate "Kernel automounter support (supports v3, v4 and v5)"
+	default n
+	help
+	   The automounter is a tool to automatically mount remote file systems
+	   on demand. This implementation is partially kernel-based to reduce
+	   overhead in the already-mounted case; this is unlike the BSD
+	   automounter (amd), which is a pure user space daemon.
+
+	   To use the automounter you need the user-space tools from
+	   <https://www.kernel.org/pub/linux/daemons/autofs/>; you also want
+	   to answer Y to "NFS file system support", below.
+
+	   To compile this support as a module, choose M here: the module will be
+	   called autofs.
+
+	   If you are not a part of a fairly large, distributed network or
+	   don't have a laptop which needs to dynamically reconfigure to the
+	   local network, you probably do not need an automounter, and can say
+	   N here.
fs/autofs/Makefile new file +7 -0
@@ -0,0 +1,7 @@
+#
+# Makefile for the linux autofs-filesystem routines.
+#
+
+obj-$(CONFIG_AUTOFS_FS) += autofs.o
+
+autofs-objs := init.o inode.o root.o symlink.o waitq.o expire.o dev-ioctl.o
fs/Kconfig +1 -0
@@ -108,6 +108,7 @@ source "fs/notify/Kconfig"
 
 source "fs/quota/Kconfig"
 
+source "fs/autofs/Kconfig"
 source "fs/autofs4/Kconfig"
 source "fs/fuse/Kconfig"
 source "fs/overlayfs/Kconfig"
fs/Makefile +1 -0
@@ -102,6 +102,7 @@ obj-$(CONFIG_AFFS_FS)		+= affs/
 obj-$(CONFIG_ROMFS_FS)		+= romfs/
 obj-$(CONFIG_QNX4FS_FS)		+= qnx4/
 obj-$(CONFIG_QNX6FS_FS)		+= qnx6/
+obj-$(CONFIG_AUTOFS_FS)		+= autofs/
 obj-$(CONFIG_AUTOFS4_FS)	+= autofs4/
 obj-$(CONFIG_ADFS_FS)		+= adfs/
 obj-$(CONFIG_FUSE_FS)		+= fuse/
fs/autofs4/Kconfig +8 -0
@@ -1,6 +1,7 @@
 config AUTOFS4_FS
 	tristate "Kernel automounter version 4 support (also supports v3 and v5)"
 	default n
+	depends on AUTOFS_FS = n
 	help
 	  The automounter is a tool to automatically mount remote file systems
 	  on demand. This implementation is partially kernel-based to reduce
@@ -30,3 +31,10 @@ config AUTOFS4_FS
 	  - any "alias autofs autofs4" will need to be removed.
 
 	  Please configure AUTOFS_FS instead of AUTOFS4_FS from now on.
+
+	  NOTE: Since the modules autofs and autofs4 use the same file system
+		type name of "autofs" only one can be built. The "depends"
+		above will result in AUTOFS4_FS not appearing in .config for
+		any setting of AUTOFS_FS other than n and AUTOFS4_FS will
+		appear under the AUTOFS_FS entry otherwise which is intended
+		to draw attention to the module rename change.
#7 lore raw
Quoted 2 lines · On Fri, 01 Jun 2018 16:42:36 +0800 Ian Kent <[email protected]> wrote:

The resulting "autofs-create-autofs-kconfig-and-makefile.patch" should now look like

Got it, thanks ;)