mfd: arizona: Don't use regmap_read_poll_timeout
Subsystems (2)
PATCH v2 1/1 mfd: arizona: Don't use regmap_read_poll_timeout
Some Arizona CODECs have a small timing window where they will NAK an I2C transaction if it happens before the boot done bit is set. This can cause the read of the register containing the boot done bit to fail until it is set. Since regmap_read_poll_timeout will abort polling if a read fails it can't be reliably used to poll the boot done bit over I2C.
Do a partial revert of ef84f885e037 ("mfd: arizona: Refactor arizona_poll_reg"), removing the regmap_read_poll_timeout but leaving the refactoring to make the arizona_poll_reg take more sensible arguments.
---
Changes since v1:
- Explicitly include ktime header
- Use USEC_PER_MSEC instead of a constant
- Refactor the loop to not use a while (true)
Thanks,
Charles
drivers/mfd/arizona-core.c | 29 ++++++++++++++++++++--------- 1 file changed, 20 insertions(+), 9 deletions(-)
drivers/mfd/arizona-core.c +20 -9
@@ -24,6 +24,7 @@#include <linux/regulator/consumer.h> #include <linux/regulator/machine.h> #include <linux/slab.h> +#include <linux/ktime.h> #include <linux/platform_device.h> #include <linux/mfd/arizona/core.h>
@@ -240,18 +241,28 @@ static int arizona_poll_reg(struct arizona *arizona, int timeout_ms, unsigned int reg, unsigned int mask, unsigned int target) { + ktime_t timeout = ktime_add_us(ktime_get(), timeout_ms * USEC_PER_MSEC);unsigned int val =0 ; -int ret; +int ret =regmap_read (arizona->regmap, reg, &val); - ret =regmap_read_poll_timeout (arizona->regmap, - reg, val, ((val & mask) == target), -ARIZONA_REG_POLL_DELAY_US , - timeout_ms *1000 ); -if (ret) -dev_err (arizona->dev,"Polling reg 0x%x timed out: %x\n" , - reg, val); +while (ktime_compare (ktime_get (), timeout) <=0 ) { +if ((val & mask) == target) +return 0 ; -return ret; +usleep_range (ARIZONA_REG_POLL_DELAY_US /2 , +ARIZONA_REG_POLL_DELAY_US ); + + ret =regmap_read (arizona->regmap, reg, &val); + } + +if (ret) { +dev_err (arizona->dev,"Failed polling reg 0x%x: %d\n" , + reg, ret); +return ret; + } + +dev_err (arizona->dev,"Polling reg 0x%x timed out: %x\n" , reg, val); +return -ETIMEDOUT ; }static int arizona_wait_for_boot (struct arizona *arizona)
Signature · 1 line
2.11.0
Quoted 40 lines · Charles Keepax
Some Arizona CODECs have a small timing window where they will NAK an I2C transaction if it happens before the boot done bit is set. This can cause the read of the register containing the boot done bit to fail until it is set. Since
regmap_read_poll_timeoutwill abort polling if a read fails it can't be reliably used to poll the boot done bit over I2C.Do a partial revert of
ef84f885e037("mfd: arizona: Refactorarizona_poll_reg"), removing theregmap_read_poll_timeoutbut leaving the refactoring to make thearizona_poll_regtake more sensible arguments.Fixes ef84f885e037 ("mfd: arizona: Refactor arizona_poll_reg")Signed-off-by Charles Keepax <[email protected]>---
Changes since v1:
- Explicitly include ktime header
- UseUSEC_PER_MSECinstead of a constant
- Refactor the loop to not use a while (true)Thanks,
Charlesdrivers/mfd/arizona-core.c | 29 ++++++++++++++++++++--------- 1 file changed, 20 insertions(+), 9 deletions(-)drivers/mfd/arizona-core.c +1
-0@@ -24,6 +24,7 @@#include <linux/regulator/consumer.h> #include <linux/regulator/machine.h> #include <linux/slab.h> +#include <linux/ktime.h> #include <linux/platform_device.h> #include <linux/mfd/arizona/core.h>
drivers/mfd/arizona-core.c static int arizona_poll_reg(struct arizona *arizona, · line 246
Quoted 7 lines
drivers/mfd/arizona-core.c +2
-1@@ -240,18 +241,28 @@ static int arizona_poll_reg(struct arizona *arizona, int timeout_ms, unsigned int reg, unsigned int mask, unsigned int target) { + ktime_t timeout = ktime_add_us(ktime_get(), timeout_ms * USEC_PER_MSEC);unsigned int val =0 ; -int ret; +int ret =regmap_read (arizona->regmap, reg, &val);
I'm not a fan of this type of initialisation.
Also, what's the point of assigning 'ret' if you never check it?
Quoted 29 lines
drivers/mfd/arizona-core.c +17
-8- ret =regmap_read_poll_timeout (arizona->regmap, - reg, val, ((val & mask) == target), -ARIZONA_REG_POLL_DELAY_US , - timeout_ms *1000 ); -if (ret) -dev_err (arizona->dev,"Polling reg 0x%x timed out: %x\n" , - reg, val); +while (ktime_compare (ktime_get (), timeout) <=0 ) { +if ((val & mask) == target) +return 0 ; -return ret; +usleep_range (ARIZONA_REG_POLL_DELAY_US /2 , +ARIZONA_REG_POLL_DELAY_US ); + + ret =regmap_read (arizona->regmap, reg, &val); + } + +if (ret) { +dev_err (arizona->dev,"Failed polling reg 0x%x: %d\n" , + reg, ret); +return ret; + } + +dev_err (arizona->dev,"Polling reg 0x%x timed out: %x\n" , reg, val); +return -ETIMEDOUT ; }static int arizona_wait_for_boot (struct arizona *arizona)
Signature · 4 lines
Lee Jones [李琼斯] Linaro Services Technical Lead Linaro.org │ Open source software for ARM SoCs Follow Linaro: Facebook | Twitter | Blog
Quoted 12 lines · Lee Jones
drivers/mfd/arizona-core.c static int arizona_poll_reg(struct arizona *arizona, · line 246
Quoted 8 lines · Charles Keepax
drivers/mfd/arizona-core.c +2
-1@@ -240,18 +241,28 @@ static int arizona_poll_reg(struct arizona *arizona, int timeout_ms, unsigned int reg, unsigned int mask, unsigned int target) { + ktime_t timeout = ktime_add_us(ktime_get(), timeout_ms * USEC_PER_MSEC);unsigned int val =0 ; -int ret; +int ret =regmap_read (arizona->regmap, reg, &val);I'm not a fan of this type of initialisation.
Quoted 2 lines
Also, what's the point of assigning 'ret' if you never check it?
It could get checked if the timeout value is very small causing the while loop to be skipped and almost certainly will cause un-initialised warnings without it.
I can move it to its own line if you prefer? Would you want a comment as well?
Thanks,
Charles
Quoted 16 lines · Charles Keepax
Quoted 12 lines · Lee Jones
drivers/mfd/arizona-core.c static int arizona_poll_reg(struct arizona *arizona, · line 246
Quoted 8 lines · Charles Keepax
drivers/mfd/arizona-core.c +2
-1@@ -240,18 +241,28 @@ static int arizona_poll_reg(struct arizona *arizona, int timeout_ms, unsigned int reg, unsigned int mask, unsigned int target) { + ktime_t timeout = ktime_add_us(ktime_get(), timeout_ms * USEC_PER_MSEC);unsigned int val =0 ; -int ret; +int ret =regmap_read (arizona->regmap, reg, &val);I'm not a fan of this type of initialisation.
Quoted 2 lines
Also, what's the point of assigning 'ret' if you never check it?
Quoted 6 lines
It could get checked if the timeout value is very small causing the while loop to be skipped and almost certainly will cause un-initialised warnings without it.
I can move it to its own line if you prefer? Would you want a comment as well?
Yes please.
Signature · 4 lines
Lee Jones [李琼斯] Linaro Services Technical Lead Linaro.org │ Open source software for ARM SoCs Follow Linaro: Facebook | Twitter | Blog