Skip to contentSkip to conversation

drm/i915/icl: Add warn about unsupported CDCLK rates

PATCH Superseded Imre Deak 3 participants 12 messages Jun 7, 2018 – Jun 11, 2018

Subsystems (2)
lore
Share & tools
lore

Imre Deak

author
#0 lore raw

PATCH 1/1 drm/i915/icl: Add warn about unsupported CDCLK rates

While checking workarounds related to the CDCLK PLL, I noticed that the DMC firmware bits for WA#1183 are missing for SKL. After that I clarified with HW people that it's not needed on SKL, since it doesn't support eDP1.4 which would be the only thing requiring the problematic CDCLK clock rates. So in theory we shouldn't ever choose these frequencies, but add an assert in any case for catching such cases and for documentation.

Cc Ville Syrjälä <[email protected]>
---
 drivers/gpu/drm/i915/intel_cdclk.c | 10 ++++++++++
 1 file changed, 10 insertions(+)
drivers/gpu/drm/i915/intel_cdclk.c +10 -0
index 704ddb4d3ca7..71045c38e233 100644
@@ -2355,6 +2355,16 @@ static int skl_modeset_calc_cdclk(struct drm_atomic_state *state)
 	 */
 	cdclk = skl_calc_cdclk(min_cdclk, vco);
 
+	/*
+	 * The following CDCLK rates are unsupported on SKL. In theory this
+	 * should never happen since only the eDP1.4 2.16 and 4.32Gbps rates
+	 * require it, but eDP1.4 is not supported on SKL, see display
+	 * WA#1183.
+	 */
+	if (IS_SKYLAKE(to_i915(state->dev)) &&
+	    (cdclk == 308571 || cdclk == 617143))
+		DRM_WARN_ONCE("Unsupported CDCLK rate.\n");
+
 	intel_state->cdclk.logical.vco = vco;
 	intel_state->cdclk.logical.cdclk = cdclk;
 	intel_state->cdclk.logical.voltage_level =
Signature · 6 lines
2.13.2

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
#1 lore raw

✓ Fi.CI.BAT: success for drm/i915/icl: Add warn about unsupported CDCLK rates

== Series Details ==

== Series Details ==

Series: drm/i915/icl: Add warn about unsupported CDCLK rates
URL : https://patchwork.freedesktop.org/series/44421/
State : success

== Summary ==

= CI Bug Log - changes from CI_DRM_4289 -> Patchwork_9231 =

== Summary - WARNING ==

Minor unknown changes coming with Patchwork_9231 need to be verified manually.

If you think the reported changes have nothing to do with the changes introduced in Patchwork_9231, please notify your bug team to allow them to document this new failure mode, which will reduce false positives in CI.

External URL: https://patchwork.freedesktop.org/api/1.0/series/44421/revisions/1/mbox/

== Possible new issues ==

Here are the unknown changes that may have been introduced in Patchwork_9231:

=== IGT changes ===

    ==== Warnings ====

    igt@gem_exec_gttfill@basic:
      fi-pnv-d510:        SKIP -> PASS

    igt@kms_pipe_crc_basic@read-crc-pipe-c:
      fi-glk-j4005:       SKIP -> PASS

== Known issues ==

Here are the changes found in Patchwork_9231 that come from known issues:

=== IGT changes ===

    ==== Issues hit ====

    igt@gem_ctx_switch@basic-default:
      fi-glk-j4005:       PASS -> DMESG-WARN (fdo#105719)

    igt@gem_mmap_gtt@basic-small-bo-tiledx:
      fi-gdg-551:         PASS -> FAIL (fdo#102575)

    igt@kms_cursor_legacy@basic-busy-flip-before-cursor-atomic:
      fi-glk-j4005:       PASS -> FAIL (fdo#106765)

    
    ==== Possible fixes ====

    igt@gem_sync@basic-many-each:
      fi-cnl-y3:          INCOMPLETE (fdo#105086) -> PASS

    igt@kms_flip@basic-flip-vs-modeset:
      fi-glk-j4005:       DMESG-WARN (fdo#106000) -> PASS +1

    igt@kms_pipe_crc_basic@suspend-read-crc-pipe-b:
      fi-cnl-psr:         DMESG-WARN (fdo#104951) -> PASS

    igt@prime_vgem@basic-fence-flip:
      fi-ilk-650:         FAIL (fdo#104008) -> PASS

fdo#102575 https://bugs.freedesktop.org/show_bug.cgi?id=102575
fdo#104008 https://bugs.freedesktop.org/show_bug.cgi?id=104008
fdo#104951 https://bugs.freedesktop.org/show_bug.cgi?id=104951
fdo#105086 https://bugs.freedesktop.org/show_bug.cgi?id=105086
fdo#105719 https://bugs.freedesktop.org/show_bug.cgi?id=105719
fdo#106000 https://bugs.freedesktop.org/show_bug.cgi?id=106000
fdo#106765 https://bugs.freedesktop.org/show_bug.cgi?id=106765

== Participating hosts (40 -> 35) ==

Missing (5): fi-hsw-4770 fi-ilk-m540 fi-byt-squawks fi-skl-6700hq fi-hsw-4200u

== Build changes ==

* Linux: CI_DRM_4289 -> Patchwork_9231

CI_DRM_4289: 0e963d962be75b4e3d3d1c884e1bf4600473096d @ git://anongit.freedesktop.org/gfx-ci/linux
IGT_4509: c8f1ae58e1b7da17af4722a5ce5a9cd8b9a34059 @ git://anongit.freedesktop.org/xorg/app/intel-gpu-tools
Patchwork_9231: 8586f606e2fc4bf26ffc12a2db5ddf23e62de570 @ git://anongit.freedesktop.org/gfx-ci/linux

== Linux commits ==

8586f606e2fc drm/i915/icl: Add warn about unsupported CDCLK rates

== Logs ==

For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_9231/issues.html
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

#2 lore raw
In reply to Imre Deak
Quoted 21 lines · Imre Deak

While checking workarounds related to the CDCLK PLL, I noticed that the DMC firmware bits for WA#1183 are missing for SKL. After that I clarified with HW people that it's not needed on SKL, since it doesn't support eDP1.4 which would be the only thing requiring the problematic CDCLK clock rates. So in theory we shouldn't ever choose these frequencies, but add an assert in any case for catching such cases and for documentation.

Cc Ville Syrjälä <[email protected]>
---
 drivers/gpu/drm/i915/intel_cdclk.c | 10 ++++++++++
 1 file changed, 10 insertions(+)
drivers/gpu/drm/i915/intel_cdclk.c +0 -0
index 704ddb4d3ca7..71045c38e233 100644
@@ -2355,6 +2355,16 @@ static int skl_modeset_calc_cdclk(struct drm_atomic_state *state)
 	 */
 	cdclk = skl_calc_cdclk(min_cdclk, vco);

drivers/gpu/drm/i915/intel_cdclk.c static int skl_modeset_calc_cdclk(struct drm_atomic_state *state) · line 2366

Quoted 10 lines
drivers/gpu/drm/i915/intel_cdclk.c +9 -0
 
+	/*
+	 * The following CDCLK rates are unsupported on SKL. In theory this
+	 * should never happen since only the eDP1.4 2.16 and 4.32Gbps rates
+	 * require it, but eDP1.4 is not supported on SKL, see display
+	 * WA#1183.
+	 */
+	if (IS_SKYLAKE(to_i915(state->dev)) &&
+	    (cdclk == 308571 || cdclk == 617143))
+		DRM_WARN_ONCE("Unsupported CDCLK rate.\n");

Or just WARN(vco == 8640000) in eg. skl_set_cdclk()?

Quoted 6 lines
drivers/gpu/drm/i915/intel_cdclk.c +1 -0
+
 	intel_state->cdclk.logical.vco = vco;
 	intel_state->cdclk.logical.cdclk = cdclk;
 	intel_state->cdclk.logical.voltage_level =
Signature · 1 line
2.13.2
Signature · 6 lines
Ville Syrjälä
Intel
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
author
#3 lore raw
Quoted 23 lines · Ville Syrjälä
Quoted 22 lines · Imre Deak

While checking workarounds related to the CDCLK PLL, I noticed that the DMC firmware bits for WA#1183 are missing for SKL. After that I clarified with HW people that it's not needed on SKL, since it doesn't support eDP1.4 which would be the only thing requiring the problematic CDCLK clock rates. So in theory we shouldn't ever choose these frequencies, but add an assert in any case for catching such cases and for documentation.

Cc Ville Syrjälä <[email protected]>
---
 drivers/gpu/drm/i915/intel_cdclk.c | 10 ++++++++++
 1 file changed, 10 insertions(+)
drivers/gpu/drm/i915/intel_cdclk.c +0 -0
index 704ddb4d3ca7..71045c38e233 100644
@@ -2355,6 +2355,16 @@ static int skl_modeset_calc_cdclk(struct drm_atomic_state *state)
 	 */
 	cdclk = skl_calc_cdclk(min_cdclk, vco);
 
Quoted 11 lines

drivers/gpu/drm/i915/intel_cdclk.c static int skl_modeset_calc_cdclk(struct drm_atomic_state *state) · line 2366

Quoted 9 lines
drivers/gpu/drm/i915/intel_cdclk.c +9 -0
+	/*
+	 * The following CDCLK rates are unsupported on SKL. In theory this
+	 * should never happen since only the eDP1.4 2.16 and 4.32Gbps rates
+	 * require it, but eDP1.4 is not supported on SKL, see display
+	 * WA#1183.
+	 */
+	if (IS_SKYLAKE(to_i915(state->dev)) &&
+	    (cdclk == 308571 || cdclk == 617143))
+		DRM_WARN_ONCE("Unsupported CDCLK rate.\n");

Or just WARN(vco == 8640000) in eg. skl_set_cdclk()?

Ok, can move it there. cdclk==432MHz is not specifically disallowed, so wouldn't checking cdclk be clearer? Even if it's not used atm.

Quoted 10 lines
Quoted 6 lines
drivers/gpu/drm/i915/intel_cdclk.c +1 -0
+
 	intel_state->cdclk.logical.vco = vco;
 	intel_state->cdclk.logical.cdclk = cdclk;
 	intel_state->cdclk.logical.voltage_level =
Signature · 1 line
2.13.2
Signature · 2 lines
Ville Syrjälä
Intel

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

#4 lore raw

✓ Fi.CI.IGT: success for drm/i915/icl: Add warn about unsupported CDCLK rates

In reply to Imre Deak
== Series Details ==

== Series Details ==

Series: drm/i915/icl: Add warn about unsupported CDCLK rates
URL : https://patchwork.freedesktop.org/series/44421/
State : success

== Summary ==

= CI Bug Log - changes from CI_DRM_4289_full -> Patchwork_9231_full =

== Summary - WARNING ==

Minor unknown changes coming with Patchwork_9231_full need to be verified manually.

If you think the reported changes have nothing to do with the changes introduced in Patchwork_9231_full, please notify your bug team to allow them to document this new failure mode, which will reduce false positives in CI.

== Possible new issues ==

Here are the unknown changes that may have been introduced in Patchwork_9231_full:

=== IGT changes ===

    ==== Warnings ====

    igt@gem_exec_schedule@deep-bsd2:
      shard-kbl:          PASS -> SKIP +1

    igt@gem_exec_schedule@deep-render:
      shard-kbl:          SKIP -> PASS

== Known issues ==

Here are the changes found in Patchwork_9231_full that come from known issues:

=== IGT changes ===

    ==== Issues hit ====

    igt@drv_selftest@live_hangcheck:
      shard-kbl:          PASS -> DMESG-FAIL (fdo#106560)

    igt@kms_cursor_legacy@flip-vs-cursor-toggle:
      shard-hsw:          PASS -> FAIL (fdo#102670)

    igt@kms_flip@2x-flip-vs-expired-vblank:
      shard-glk:          PASS -> FAIL (fdo#105363)

    igt@kms_flip@2x-plain-flip-fb-recreate-interruptible:
      shard-glk:          PASS -> FAIL (fdo#100368)

    igt@kms_flip@flip-vs-expired-vblank:
      shard-glk:          PASS -> FAIL (fdo#102887, fdo#105363)

    igt@kms_flip_tiling@flip-to-x-tiled:
      shard-glk:          PASS -> FAIL (fdo#104724)

    igt@kms_flip_tiling@flip-to-y-tiled:
      shard-glk:          PASS -> FAIL (fdo#103822, fdo#104724)

    igt@kms_rotation_crc@primary-rotation-270:
      shard-glk:          PASS -> FAIL (fdo#103925, fdo#104724)

    
    ==== Possible fixes ====

    igt@drv_selftest@live_gtt:
      shard-glk:          INCOMPLETE (k.org#198133, fdo#103359) -> PASS

    igt@kms_atomic_transition@1x-modeset-transitions-nonblocking-fencing:
      shard-glk:          FAIL (fdo#105703) -> PASS +1

    igt@kms_flip@dpms-vs-vblank-race-interruptible:
      shard-hsw:          FAIL (fdo#103060) -> PASS

    igt@kms_flip@wf_vblank-ts-check:
      shard-hsw:          FAIL (fdo#103928) -> PASS

    igt@kms_plane@plane-panning-bottom-right-suspend-pipe-c-planes:
      shard-kbl:          INCOMPLETE (fdo#103665) -> PASS

    igt@kms_setmode@basic:
      shard-apl:          FAIL (fdo#99912) -> PASS

fdo#100368 https://bugs.freedesktop.org/show_bug.cgi?id=100368
fdo#102670 https://bugs.freedesktop.org/show_bug.cgi?id=102670
fdo#102887 https://bugs.freedesktop.org/show_bug.cgi?id=102887
fdo#103060 https://bugs.freedesktop.org/show_bug.cgi?id=103060
fdo#103359 https://bugs.freedesktop.org/show_bug.cgi?id=103359
fdo#103665 https://bugs.freedesktop.org/show_bug.cgi?id=103665
fdo#103822 https://bugs.freedesktop.org/show_bug.cgi?id=103822
fdo#103925 https://bugs.freedesktop.org/show_bug.cgi?id=103925
fdo#103928 https://bugs.freedesktop.org/show_bug.cgi?id=103928
fdo#104724 https://bugs.freedesktop.org/show_bug.cgi?id=104724
fdo#105363 https://bugs.freedesktop.org/show_bug.cgi?id=105363
fdo#105703 https://bugs.freedesktop.org/show_bug.cgi?id=105703
fdo#106560 https://bugs.freedesktop.org/show_bug.cgi?id=106560
fdo#99912 https://bugs.freedesktop.org/show_bug.cgi?id=99912
k.org#198133 https://bugzilla.kernel.org/show_bug.cgi?id=198133

== Participating hosts (5 -> 5) ==

No changes in participating hosts

== Build changes ==

* Linux: CI_DRM_4289 -> Patchwork_9231

CI_DRM_4289: 0e963d962be75b4e3d3d1c884e1bf4600473096d @ git://anongit.freedesktop.org/gfx-ci/linux
IGT_4509: c8f1ae58e1b7da17af4722a5ce5a9cd8b9a34059 @ git://anongit.freedesktop.org/xorg/app/intel-gpu-tools
Patchwork_9231: 8586f606e2fc4bf26ffc12a2db5ddf23e62de570 @ git://anongit.freedesktop.org/gfx-ci/linux
piglit_4509: fdc5a4ca11124ab8413c7988896eec4c97336694 @ git://anongit.freedesktop.org/piglit

== Logs ==

For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_9231/shards.html
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

author
#5 lore raw

PATCH v2 1/1 drm/i915/skl: Add warn about unsupported CDCLK rates

In reply to Imre Deak

While checking workarounds related to the CDCLK PLL, I noticed that the DMC firmware bits for WA#1183 are missing for SKL. After that I clarified with HW people that it's not needed on SKL, since it doesn't support eDP1.4 which would be the only thing requiring the problematic CDCLK clock rates. So in theory we shouldn't ever choose these frequencies, but add an assert in any case for catching such cases and for documentation.

v2:
- Move the check to skl_set_cdclk and warn whenever using the corresponding VCO freq. (Ville)

Cc Ville Syrjälä <[email protected]>
---
 drivers/gpu/drm/i915/intel_cdclk.c | 10 ++++++++++
 1 file changed, 10 insertions(+)
drivers/gpu/drm/i915/intel_cdclk.c +10 -0
index 704ddb4d3ca7..a1e9434698b9 100644
@@ -991,6 +991,16 @@ static void skl_set_cdclk(struct drm_i915_private *dev_priv,
 	u32 freq_select, cdclk_ctl;
 	int ret;
 
+	/*
+	 * Based on WA#1183 CDCLK rates 308 and 617MHz CDCLK rates are
+	 * unsupported on SKL. In theory this should never happen since only
+	 * the eDP1.4 2.16 and 4.32Gbps rates require it, but eDP1.4 is not
+	 * supported on SKL either, see the above WA. WARN whenever trying to
+	 * use the corresponding VCO freq as that always leads to using the
+	 * minimum 308MHz CDCLK.
+	 */
+	WARN_ON_ONCE(vco == 8640000);
+
 	mutex_lock(&dev_priv->pcu_lock);
 	ret = skl_pcode_request(dev_priv, SKL_PCODE_CDCLK_CONTROL,
 				SKL_CDCLK_PREPARE_FOR_CHANGE,
Signature · 6 lines
2.13.2

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Reviewed-by on v2 1/1
#6 lore raw

Re: [PATCH v2] drm/i915/skl: Add warn about unsupported CDCLK rates

Quoted 25 lines · Imre Deak

While checking workarounds related to the CDCLK PLL, I noticed that the DMC firmware bits for WA#1183 are missing for SKL. After that I clarified with HW people that it's not needed on SKL, since it doesn't support eDP1.4 which would be the only thing requiring the problematic CDCLK clock rates. So in theory we shouldn't ever choose these frequencies, but add an assert in any case for catching such cases and for documentation.

v2:
- Move the check to skl_set_cdclk and warn whenever using the corresponding VCO freq. (Ville)

Cc Ville Syrjälä <[email protected]>
---
 drivers/gpu/drm/i915/intel_cdclk.c | 10 ++++++++++
 1 file changed, 10 insertions(+)
drivers/gpu/drm/i915/intel_cdclk.c +0 -0
index 704ddb4d3ca7..a1e9434698b9 100644
@@ -991,6 +991,16 @@ static void skl_set_cdclk(struct drm_i915_private *dev_priv,
 	u32 freq_select, cdclk_ctl;
 	int ret;

drivers/gpu/drm/i915/intel_cdclk.c static void skl_set_cdclk(struct drm_i915_private *dev_priv, · line 1002

Quoted 10 lines
drivers/gpu/drm/i915/intel_cdclk.c +9 -0
 
+	/*
+	 * Based on WA#1183 CDCLK rates 308 and 617MHz CDCLK rates are
+	 * unsupported on SKL. In theory this should never happen since only
+	 * the eDP1.4 2.16 and 4.32Gbps rates require it, but eDP1.4 is not
+	 * supported on SKL either, see the above WA. WARN whenever trying to
+	 * use the corresponding VCO freq as that always leads to using the
+	 * minimum 308MHz CDCLK.
+	 */
+	WARN_ON_ONCE(vco == 8640000);

Needs IS_SKYLAKE()

with that

Quoted 6 lines
drivers/gpu/drm/i915/intel_cdclk.c +1 -0
+
 	mutex_lock(&dev_priv->pcu_lock);
 	ret = skl_pcode_request(dev_priv, SKL_PCODE_CDCLK_CONTROL,
 				SKL_CDCLK_PREPARE_FOR_CHANGE,
Signature · 1 line
2.13.2
Signature · 6 lines
Ville Syrjälä
Intel
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
author
#7 lore raw

PATCH v3 1/1 drm/i915/skl: Add warn about unsupported CDCLK rates

In reply to Imre Deak

While checking workarounds related to the CDCLK PLL, I noticed that the DMC firmware bits for WA#1183 are missing for SKL. After that I clarified with HW people that it's not needed on SKL, since it doesn't support eDP1.4 which would be the only thing requiring the problematic CDCLK clock rates. So in theory we shouldn't ever choose these frequencies, but add an assert in any case for catching such cases and for documentation.

v2:
- Move the check to skl_set_cdclk and warn whenever using the corresponding VCO freq. (Ville)

v3:
- Actually check for the platform. (Ville)

---
 drivers/gpu/drm/i915/intel_cdclk.c | 10 ++++++++++
 1 file changed, 10 insertions(+)
drivers/gpu/drm/i915/intel_cdclk.c +10 -0
index 704ddb4d3ca7..8ed7bd052e46 100644
@@ -991,6 +991,16 @@ static void skl_set_cdclk(struct drm_i915_private *dev_priv,
 	u32 freq_select, cdclk_ctl;
 	int ret;
 
+	/*
+	 * Based on WA#1183 CDCLK rates 308 and 617MHz CDCLK rates are
+	 * unsupported on SKL. In theory this should never happen since only
+	 * the eDP1.4 2.16 and 4.32Gbps rates require it, but eDP1.4 is not
+	 * supported on SKL either, see the above WA. WARN whenever trying to
+	 * use the corresponding VCO freq as that always leads to using the
+	 * minimum 308MHz CDCLK.
+	 */
+	WARN_ON_ONCE(IS_SKYLAKE(dev_priv) && vco == 8640000);
+
 	mutex_lock(&dev_priv->pcu_lock);
 	ret = skl_pcode_request(dev_priv, SKL_PCODE_CDCLK_CONTROL,
 				SKL_CDCLK_PREPARE_FOR_CHANGE,
Signature · 6 lines
2.13.2

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
#8 lore raw

✓ Fi.CI.BAT: success for drm/i915/icl: Add warn about unsupported CDCLK rates (rev2)

In reply to Imre Deak
== Series Details ==

== Series Details ==

Series: drm/i915/icl: Add warn about unsupported CDCLK rates (rev2)
URL : https://patchwork.freedesktop.org/series/44421/
State : success

== Summary ==

= CI Bug Log - changes from CI_DRM_4294 -> Patchwork_9243 =

== Summary - WARNING ==

Minor unknown changes coming with Patchwork_9243 need to be verified manually.

If you think the reported changes have nothing to do with the changes introduced in Patchwork_9243, please notify your bug team to allow them to document this new failure mode, which will reduce false positives in CI.

External URL: https://patchwork.freedesktop.org/api/1.0/series/44421/revisions/2/mbox/

== Possible new issues ==

Here are the unknown changes that may have been introduced in Patchwork_9243:

=== IGT changes ===

    ==== Warnings ====

    igt@gem_exec_gttfill@basic:
      fi-pnv-d510:        SKIP -> PASS

== Known issues ==

Here are the changes found in Patchwork_9243 that come from known issues:

=== IGT changes ===

    ==== Issues hit ====

    igt@kms_flip@basic-plain-flip:
      fi-glk-j4005:       PASS -> DMESG-WARN (fdo#106097)

    igt@kms_pipe_crc_basic@read-crc-pipe-a-frame-sequence:
      fi-skl-6770hq:      PASS -> FAIL (fdo#103481)

    
    ==== Possible fixes ====

    igt@gem_sync@basic-many-each:
      fi-cnl-y3:          INCOMPLETE (fdo#105086) -> PASS

    igt@kms_chamelium@dp-crc-fast:
      fi-kbl-7500u:       DMESG-FAIL (fdo#103841) -> PASS

fdo#103481 https://bugs.freedesktop.org/show_bug.cgi?id=103481
fdo#103841 https://bugs.freedesktop.org/show_bug.cgi?id=103841
fdo#105086 https://bugs.freedesktop.org/show_bug.cgi?id=105086
fdo#106097 https://bugs.freedesktop.org/show_bug.cgi?id=106097

== Participating hosts (41 -> 38) ==

Additional (1): fi-bxt-dsi
Missing (4): fi-byt-j1900 fi-ilk-m540 fi-byt-squawks fi-skl-6700hq

== Build changes ==

* Linux: CI_DRM_4294 -> Patchwork_9243

CI_DRM_4294: af0889384edc6de2f91494325d571c66dffea83f @ git://anongit.freedesktop.org/gfx-ci/linux
IGT_4512: 093fa482371795c3aa246509994eb21907f501b9 @ git://anongit.freedesktop.org/xorg/app/intel-gpu-tools
Patchwork_9243: ba6a0a473aee6cd0a690ba05c03a486148baf2a6 @ git://anongit.freedesktop.org/gfx-ci/linux

== Linux commits ==

ba6a0a473aee drm/i915/skl: Add warn about unsupported CDCLK rates

== Logs ==

For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_9243/issues.html
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

#9 lore raw

✓ Fi.CI.BAT: success for drm/i915/icl: Add warn about unsupported CDCLK rates (rev3)

In reply to Imre Deak
== Series Details ==

== Series Details ==

Series: drm/i915/icl: Add warn about unsupported CDCLK rates (rev3)
URL : https://patchwork.freedesktop.org/series/44421/
State : success

== Summary ==

= CI Bug Log - changes from CI_DRM_4294 -> Patchwork_9244 =

== Summary - SUCCESS ==

No regressions found.

External URL: https://patchwork.freedesktop.org/api/1.0/series/44421/revisions/3/mbox/

== Known issues ==

Here are the changes found in Patchwork_9244 that come from known issues:

=== IGT changes ===

    ==== Issues hit ====

    igt@prime_vgem@basic-fence-flip:
      fi-kbl-7500u:       PASS -> FAIL (fdo#104008)

    
    ==== Possible fixes ====

    igt@gem_sync@basic-many-each:
      fi-cnl-y3:          INCOMPLETE (fdo#105086) -> PASS

    igt@kms_chamelium@dp-crc-fast:
      fi-kbl-7500u:       DMESG-FAIL (fdo#103841) -> PASS

    igt@kms_flip@basic-flip-vs-dpms:
      fi-glk-j4005:       DMESG-WARN (fdo#106000) -> PASS

    igt@kms_flip@basic-flip-vs-modeset:
      fi-glk-j4005:       DMESG-WARN (fdo#106097, fdo#106000) -> PASS

fdo#103841 https://bugs.freedesktop.org/show_bug.cgi?id=103841
fdo#104008 https://bugs.freedesktop.org/show_bug.cgi?id=104008
fdo#105086 https://bugs.freedesktop.org/show_bug.cgi?id=105086
fdo#106000 https://bugs.freedesktop.org/show_bug.cgi?id=106000
fdo#106097 https://bugs.freedesktop.org/show_bug.cgi?id=106097

== Participating hosts (41 -> 36) ==

Missing (5): fi-byt-j1900 fi-ilk-m540 fi-byt-squawks fi-skl-6700hq fi-pnv-d510

== Build changes ==

* Linux: CI_DRM_4294 -> Patchwork_9244

CI_DRM_4294: af0889384edc6de2f91494325d571c66dffea83f @ git://anongit.freedesktop.org/gfx-ci/linux
IGT_4512: 093fa482371795c3aa246509994eb21907f501b9 @ git://anongit.freedesktop.org/xorg/app/intel-gpu-tools
Patchwork_9244: 38bcd836f3574fc1949555dc0cb11e8a9ad25c82 @ git://anongit.freedesktop.org/gfx-ci/linux

== Linux commits ==

38bcd836f357 drm/i915/skl: Add warn about unsupported CDCLK rates

== Logs ==

For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_9244/issues.html
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

#10 lore raw

✓ Fi.CI.IGT: success for drm/i915/icl: Add warn about unsupported CDCLK rates (rev3)

In reply to Imre Deak
== Series Details ==

== Series Details ==

Series: drm/i915/icl: Add warn about unsupported CDCLK rates (rev3)
URL : https://patchwork.freedesktop.org/series/44421/
State : success

== Summary ==

= CI Bug Log - changes from CI_DRM_4294_full -> Patchwork_9244_full =

== Summary - WARNING ==

Minor unknown changes coming with Patchwork_9244_full need to be verified manually.

If you think the reported changes have nothing to do with the changes introduced in Patchwork_9244_full, please notify your bug team to allow them to document this new failure mode, which will reduce false positives in CI.

== Possible new issues ==

Here are the unknown changes that may have been introduced in Patchwork_9244_full:

=== IGT changes ===

    ==== Warnings ====

    igt@gem_exec_schedule@deep-bsd1:
      shard-kbl:          PASS -> SKIP +1

    igt@perf_pmu@rc6:
      shard-kbl:          SKIP -> PASS

== Known issues ==

Here are the changes found in Patchwork_9244_full that come from known issues:

=== IGT changes ===

    ==== Issues hit ====

    igt@drv_selftest@live_hangcheck:
      shard-apl:          PASS -> DMESG-FAIL (fdo#106560)

    igt@kms_flip@2x-flip-vs-expired-vblank:
      shard-hsw:          PASS -> FAIL (fdo#105189)

    igt@kms_flip@2x-flip-vs-expired-vblank-interruptible:
      shard-glk:          PASS -> FAIL (fdo#105363)

    igt@kms_flip@flip-vs-expired-vblank-interruptible:
      shard-glk:          PASS -> FAIL (fdo#105189)

    igt@kms_flip@plain-flip-ts-check-interruptible:
      shard-glk:          PASS -> FAIL (fdo#100368)

    igt@kms_setmode@basic:
      shard-apl:          PASS -> FAIL (fdo#99912)

    
    ==== Possible fixes ====

    igt@drv_selftest@live_gtt:
      shard-glk:          INCOMPLETE (fdo#103359, k.org#198133) -> PASS
      shard-apl:          FAIL (fdo#105347) -> PASS

    igt@drv_selftest@live_hangcheck:
      shard-kbl:          DMESG-FAIL (fdo#106560) -> PASS

    igt@kms_atomic_transition@1x-modeset-transitions-nonblocking-fencing:
      shard-glk:          FAIL (fdo#105703) -> PASS

    igt@kms_cursor_legacy@2x-nonblocking-modeset-vs-cursor-atomic:
      shard-glk:          FAIL (fdo#105454, fdo#106509) -> PASS

    igt@kms_flip@2x-plain-flip-fb-recreate:
      shard-hsw:          FAIL (fdo#100368) -> PASS +1
      shard-glk:          FAIL (fdo#100368) -> PASS

    igt@kms_flip@modeset-vs-vblank-race-interruptible:
      shard-hsw:          FAIL (fdo#103060) -> PASS +1

    igt@kms_flip_tiling@flip-to-y-tiled:
      shard-glk:          FAIL (fdo#104724) -> PASS

    igt@kms_frontbuffer_tracking@fbc-1p-primscrn-pri-indfb-draw-mmap-cpu:
      shard-snb:          FAIL (fdo#103167, fdo#104724) -> PASS

fdo#100368 https://bugs.freedesktop.org/show_bug.cgi?id=100368
fdo#103060 https://bugs.freedesktop.org/show_bug.cgi?id=103060
fdo#103167 https://bugs.freedesktop.org/show_bug.cgi?id=103167
fdo#103359 https://bugs.freedesktop.org/show_bug.cgi?id=103359
fdo#104724 https://bugs.freedesktop.org/show_bug.cgi?id=104724
fdo#105189 https://bugs.freedesktop.org/show_bug.cgi?id=105189
fdo#105347 https://bugs.freedesktop.org/show_bug.cgi?id=105347
fdo#105363 https://bugs.freedesktop.org/show_bug.cgi?id=105363
fdo#105454 https://bugs.freedesktop.org/show_bug.cgi?id=105454
fdo#105703 https://bugs.freedesktop.org/show_bug.cgi?id=105703
fdo#106509 https://bugs.freedesktop.org/show_bug.cgi?id=106509
fdo#106560 https://bugs.freedesktop.org/show_bug.cgi?id=106560
fdo#99912 https://bugs.freedesktop.org/show_bug.cgi?id=99912
k.org#198133 https://bugzilla.kernel.org/show_bug.cgi?id=198133

== Participating hosts (5 -> 5) ==

No changes in participating hosts

== Build changes ==

* Linux: CI_DRM_4294 -> Patchwork_9244

CI_DRM_4294: af0889384edc6de2f91494325d571c66dffea83f @ git://anongit.freedesktop.org/gfx-ci/linux
IGT_4512: 093fa482371795c3aa246509994eb21907f501b9 @ git://anongit.freedesktop.org/xorg/app/intel-gpu-tools
Patchwork_9244: 38bcd836f3574fc1949555dc0cb11e8a9ad25c82 @ git://anongit.freedesktop.org/gfx-ci/linux
piglit_4509: fdc5a4ca11124ab8413c7988896eec4c97336694 @ git://anongit.freedesktop.org/piglit

== Logs ==

For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_9244/shards.html
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

author Applied
#11 lore raw

Re: ✓ Fi.CI.IGT: success for drm/i915/icl: Add warn about unsupported CDCLK rates (rev3)

Quoted 5 lines · Patchwork

== Series Details ==

Series: drm/i915/icl: Add warn about unsupported CDCLK rates (rev3)
URL : https://patchwork.freedesktop.org/series/44421/
State : success

Pushed to -dinq, thanks for the review.

Quoted 112 lines

== Summary ==

= CI Bug Log - changes from CI_DRM_4294_full -> Patchwork_9244_full =

== Summary - WARNING ==

Minor unknown changes coming with Patchwork_9244_full need to be verified manually.

If you think the reported changes have nothing to do with the changes introduced in Patchwork_9244_full, please notify your bug team to allow them to document this new failure mode, which will reduce false positives in CI.

== Possible new issues ==

Here are the unknown changes that may have been introduced in Patchwork_9244_full:

=== IGT changes ===

    ==== Warnings ====

    igt@gem_exec_schedule@deep-bsd1:
      shard-kbl:          PASS -> SKIP +1

    igt@perf_pmu@rc6:
      shard-kbl:          SKIP -> PASS

== Known issues ==

Here are the changes found in Patchwork_9244_full that come from known issues:

=== IGT changes ===

    ==== Issues hit ====

    igt@drv_selftest@live_hangcheck:
      shard-apl:          PASS -> DMESG-FAIL (fdo#106560)

    igt@kms_flip@2x-flip-vs-expired-vblank:
      shard-hsw:          PASS -> FAIL (fdo#105189)

    igt@kms_flip@2x-flip-vs-expired-vblank-interruptible:
      shard-glk:          PASS -> FAIL (fdo#105363)

    igt@kms_flip@flip-vs-expired-vblank-interruptible:
      shard-glk:          PASS -> FAIL (fdo#105189)

    igt@kms_flip@plain-flip-ts-check-interruptible:
      shard-glk:          PASS -> FAIL (fdo#100368)

    igt@kms_setmode@basic:
      shard-apl:          PASS -> FAIL (fdo#99912)

    
    ==== Possible fixes ====

    igt@drv_selftest@live_gtt:
      shard-glk:          INCOMPLETE (fdo#103359, k.org#198133) -> PASS
      shard-apl:          FAIL (fdo#105347) -> PASS

    igt@drv_selftest@live_hangcheck:
      shard-kbl:          DMESG-FAIL (fdo#106560) -> PASS

    igt@kms_atomic_transition@1x-modeset-transitions-nonblocking-fencing:
      shard-glk:          FAIL (fdo#105703) -> PASS

    igt@kms_cursor_legacy@2x-nonblocking-modeset-vs-cursor-atomic:
      shard-glk:          FAIL (fdo#105454, fdo#106509) -> PASS

    igt@kms_flip@2x-plain-flip-fb-recreate:
      shard-hsw:          FAIL (fdo#100368) -> PASS +1
      shard-glk:          FAIL (fdo#100368) -> PASS

    igt@kms_flip@modeset-vs-vblank-race-interruptible:
      shard-hsw:          FAIL (fdo#103060) -> PASS +1

    igt@kms_flip_tiling@flip-to-y-tiled:
      shard-glk:          FAIL (fdo#104724) -> PASS

    igt@kms_frontbuffer_tracking@fbc-1p-primscrn-pri-indfb-draw-mmap-cpu:
      shard-snb:          FAIL (fdo#103167, fdo#104724) -> PASS

fdo#100368 https://bugs.freedesktop.org/show_bug.cgi?id=100368
fdo#103060 https://bugs.freedesktop.org/show_bug.cgi?id=103060
fdo#103167 https://bugs.freedesktop.org/show_bug.cgi?id=103167
fdo#103359 https://bugs.freedesktop.org/show_bug.cgi?id=103359
fdo#104724 https://bugs.freedesktop.org/show_bug.cgi?id=104724
fdo#105189 https://bugs.freedesktop.org/show_bug.cgi?id=105189
fdo#105347 https://bugs.freedesktop.org/show_bug.cgi?id=105347
fdo#105363 https://bugs.freedesktop.org/show_bug.cgi?id=105363
fdo#105454 https://bugs.freedesktop.org/show_bug.cgi?id=105454
fdo#105703 https://bugs.freedesktop.org/show_bug.cgi?id=105703
fdo#106509 https://bugs.freedesktop.org/show_bug.cgi?id=106509
fdo#106560 https://bugs.freedesktop.org/show_bug.cgi?id=106560
fdo#99912 https://bugs.freedesktop.org/show_bug.cgi?id=99912
k.org#198133 https://bugzilla.kernel.org/show_bug.cgi?id=198133

== Participating hosts (5 -> 5) ==

No changes in participating hosts

== Build changes ==

* Linux: CI_DRM_4294 -> Patchwork_9244

Quoted 8 lines

CI_DRM_4294: af0889384edc6de2f91494325d571c66dffea83f @ git://anongit.freedesktop.org/gfx-ci/linux
IGT_4512: 093fa482371795c3aa246509994eb21907f501b9 @ git://anongit.freedesktop.org/xorg/app/intel-gpu-tools
Patchwork_9244: 38bcd836f3574fc1949555dc0cb11e8a9ad25c82 @ git://anongit.freedesktop.org/gfx-ci/linux
piglit_4509: fdc5a4ca11124ab8413c7988896eec4c97336694 @ git://anongit.freedesktop.org/piglit

== Logs ==

For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_9244/shards.html

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx