PCI: improve host drivers compile test coverage
Subsystems (3)
Rob Herring
reviewerPATCH v4 1/1 PCI: improve host drivers compile test coverage
Add COMPILE_TEST on driver config options with it. Some ARM drivers still have arch dependencies, so we have to keep those dependent on ARM.
---
v4: Drop iProc hunks
drivers/pci/dwc/Kconfig | 24 ++++++++++++------------ drivers/pci/host/Kconfig | 31 ++++++++++++++----------------- 2 files changed, 26 insertions(+), 29 deletions(-)
drivers/pci/dwc/Kconfig +12 -12
@@ -64,21 +64,21 @@ config PCIE_DW_PLAT config PCI_EXYNOS bool "Samsung Exynos PCIe controller" - depends on SOC_EXYNOS5440 + depends on SOC_EXYNOS5440 || COMPILE_TEST depends on PCI_MSI_IRQ_DOMAIN select PCIEPORTBUS select PCIE_DW_HOST config PCI_IMX6 bool "Freescale i.MX6 PCIe controller" - depends on SOC_IMX6Q + depends on SOC_IMX6Q || (ARM && COMPILE_TEST) depends on PCI_MSI_IRQ_DOMAIN select PCIEPORTBUS select PCIE_DW_HOST config PCIE_SPEAR13XX bool "STMicroelectronics SPEAr PCIe controller" - depends on ARCH_SPEAR13XX + depends on ARCH_SPEAR13XX || COMPILE_TEST depends on PCI_MSI_IRQ_DOMAIN select PCIEPORTBUS select PCIE_DW_HOST
@@ -87,7 +87,7 @@ config PCIE_SPEAR13XX config PCI_KEYSTONE bool "TI Keystone PCIe controller" - depends on ARCH_KEYSTONE + depends on ARCH_KEYSTONE || (ARM && COMPILE_TEST) depends on PCI_MSI_IRQ_DOMAIN select PCIEPORTBUS select PCIE_DW_HOST
@@ -99,7 +99,7 @@ config PCI_KEYSTONE config PCI_LAYERSCAPE bool "Freescale Layerscape PCIe controller" - depends on OF && (ARM || ARCH_LAYERSCAPE) + depends on OF && (ARM || ARCH_LAYERSCAPE || COMPILE_TEST) depends on PCI_MSI_IRQ_DOMAIN select MFD_SYSCON select PCIE_DW_HOST
@@ -107,7 +107,7 @@ config PCI_LAYERSCAPE Say Y here if you want PCIe controller support on Layerscape SoCs. config PCI_HISI - depends on OF && ARM64 + depends on OF && (ARM64 || COMPILE_TEST) bool "HiSilicon Hip05 and Hip06 SoCs PCIe controllers" depends on PCI_MSI_IRQ_DOMAIN select PCIEPORTBUS
@@ -119,7 +119,7 @@ config PCI_HISI config PCIE_QCOM bool "Qualcomm PCIe controller" - depends on ARCH_QCOM && OF + depends on OF && (ARCH_QCOM || COMPILE_TEST) depends on PCI_MSI_IRQ_DOMAIN select PCIEPORTBUS select PCIE_DW_HOST
@@ -130,7 +130,7 @@ config PCIE_QCOM config PCIE_ARMADA_8K bool "Marvell Armada-8K PCIe controller" - depends on ARCH_MVEBU + depends on ARCH_MVEBU || COMPILE_TEST depends on PCI_MSI_IRQ_DOMAIN select PCIEPORTBUS select PCIE_DW_HOST
@@ -145,7 +145,7 @@ config PCIE_ARTPEC6 config PCIE_ARTPEC6_HOST bool "Axis ARTPEC-6 PCIe controller Host Mode" - depends on MACH_ARTPEC6 + depends on MACH_ARTPEC6 || COMPILE_TEST depends on PCI_MSI_IRQ_DOMAIN select PCIEPORTBUS select PCIE_DW_HOST
@@ -156,7 +156,7 @@ config PCIE_ARTPEC6_HOST config PCIE_ARTPEC6_EP bool "Axis ARTPEC-6 PCIe controller Endpoint Mode" - depends on MACH_ARTPEC6 + depends on MACH_ARTPEC6 || COMPILE_TEST depends on PCI_ENDPOINT select PCIE_DW_EP select PCIE_ARTPEC6
@@ -165,7 +165,7 @@ config PCIE_ARTPEC6_EP endpoint mode. This uses the DesignWare core. config PCIE_KIRIN - depends on OF && ARM64 + depends on OF && (ARM64 || COMPILE_TEST) bool "HiSilicon Kirin series SoCs PCIe controllers" depends on PCI_MSI_IRQ_DOMAIN select PCIEPORTBUS
@@ -176,7 +176,7 @@ config PCIE_KIRIN config PCIE_HISI_STB bool "HiSilicon STB SoCs PCIe controllers" - depends on ARCH_HISI + depends on ARCH_HISI || COMPILE_TEST depends on PCI_MSI_IRQ_DOMAIN select PCIEPORTBUS select PCIE_DW_HOST
drivers/pci/host/Kconfig +14 -17
@@ -5,13 +5,13 @@ menu "PCI host controller drivers" config PCI_MVEBU bool "Marvell EBU PCIe controller" - depends on ARCH_MVEBU || ARCH_DOVE + depends on ARCH_MVEBU || ARCH_DOVE || COMPILE_TEST depends on ARM depends on OF config PCI_AARDVARK bool "Aardvark PCIe controller" - depends on ARCH_MVEBU && ARM64 + depends on (ARCH_MVEBU && ARM64) || COMPILE_TEST depends on OF depends on PCI_MSI_IRQ_DOMAIN help
@@ -21,7 +21,7 @@ config PCI_AARDVARK config PCIE_XILINX_NWL bool "NWL PCIe Core" - depends on ARCH_ZYNQMP + depends on ARCH_ZYNQMP || COMPILE_TEST depends on PCI_MSI_IRQ_DOMAIN help Say 'Y' here if you want kernel support for Xilinx
@@ -32,12 +32,11 @@ config PCIE_XILINX_NWL config PCI_FTPCI100 bool "Faraday Technology FTPCI100 PCI controller" depends on OF - depends on ARM default ARCH_GEMINI config PCI_TEGRA bool "NVIDIA Tegra PCIe controller" - depends on ARCH_TEGRA + depends on ARCH_TEGRA || COMPILE_TEST depends on PCI_MSI_IRQ_DOMAIN help Say Y here if you want support for the PCIe host controller found
@@ -45,8 +44,8 @@ config PCI_TEGRA config PCI_RCAR_GEN2 bool "Renesas R-Car Gen2 Internal PCI controller" - depends on ARM depends on ARCH_RENESAS || COMPILE_TEST + depends on ARM help Say Y here if you want internal PCI support on R-Car Gen2 SoC. There are 3 internal PCI controllers available with a single
@@ -54,7 +53,7 @@ config PCI_RCAR_GEN2 config PCIE_RCAR bool "Renesas R-Car PCIe controller" - depends on ARCH_RENESAS || (ARM && COMPILE_TEST) + depends on ARCH_RENESAS || COMPILE_TEST depends on PCI_MSI_IRQ_DOMAIN help Say Y here if you want PCIe controller support on R-Car SoCs.
@@ -65,7 +64,7 @@ config PCI_HOST_COMMON config PCI_HOST_GENERIC bool "Generic PCI host controller" - depends on (ARM || ARM64) && OF + depends on OF select PCI_HOST_COMMON select IRQ_DOMAIN help
@@ -74,14 +73,14 @@ config PCI_HOST_GENERIC config PCIE_XILINX bool "Xilinx AXI PCIe host bridge support" - depends on ARCH_ZYNQ || MICROBLAZE || (MIPS && PCI_DRIVERS_GENERIC) + depends on ARCH_ZYNQ || MICROBLAZE || (MIPS && PCI_DRIVERS_GENERIC) || COMPILE_TEST help Say 'Y' here if you want kernel to support the Xilinx AXI PCIe Host Bridge driver. config PCI_XGENE bool "X-Gene PCIe controller" - depends on ARM64 + depends on ARM64 || COMPILE_TEST depends on OF || (ACPI && PCI_QUIRKS) select PCIEPORTBUS help
@@ -101,7 +100,7 @@ config PCI_XGENE_MSI config PCI_V3_SEMI bool "V3 Semiconductor PCI controller" depends on OF - depends on ARM + depends on ARM || COMPILE_TEST default ARCH_INTEGRATOR_AP config PCI_VERSATILE
@@ -147,8 +146,7 @@ config PCIE_IPROC_MSI config PCIE_ALTERA bool "Altera PCIe controller" - depends on ARM || NIOS2 - depends on OF_PCI + depends on ARM || NIOS2 || COMPILE_TEST select PCI_DOMAINS help Say Y here if you want to enable PCIe controller support on Altera
@@ -164,7 +162,7 @@ config PCIE_ALTERA_MSI config PCI_HOST_THUNDER_PEM bool "Cavium Thunder PCIe controller to off-chip devices" - depends on ARM64 + depends on ARM64 || COMPILE_TEST depends on OF || (ACPI && PCI_QUIRKS) select PCI_HOST_COMMON help
@@ -172,7 +170,7 @@ config PCI_HOST_THUNDER_PEM config PCI_HOST_THUNDER_ECAM bool "Cavium Thunder ECAM controller to on-chip devices on pass-1.x silicon" - depends on ARM64 + depends on ARM64 || COMPILE_TEST depends on OF || (ACPI && PCI_QUIRKS) select PCI_HOST_COMMON help
@@ -191,9 +189,8 @@ config PCIE_ROCKCHIP config PCIE_MEDIATEK bool "MediaTek PCIe controller" - depends on (ARM || ARM64) && (ARCH_MEDIATEK || COMPILE_TEST) + depends on ARCH_MEDIATEK || COMPILE_TEST depends on OF - depends on PCI select PCIEPORTBUS help Say Y here if you want to enable PCIe controller support on
Signature · 1 line
2.14.1
Hi Rob,
drivers/pci/host/Kconfig config PCIE_IPROC_MSI · line 149
Quoted 13 lines · Rob Herring
Add
COMPILE_TESTon driver config options with it. Some ARM drivers still have arch dependencies, so we have to keep those dependent on ARM.Cc Lorenzo Pieralisi <[email protected]>Cc Bjorn Helgaas <[email protected]>Signed-off-by Rob Herring <[email protected]>config
PCIE_ALTERAdrivers/pci/host/Kconfig +1
-2bool "Altera PCIe controller" - depends on ARM || NIOS2 - depends on OF_PCI + depends on ARM || NIOS2 || COMPILE_TEST
Did you intend to drop the OF_PCI dependency?
I see that CONFIG_OF_PCI doesn't exist, so that looks bogus.
But drivers/pci/host/pcie-altera.c still uses devm_of_pci_get_host_bridge_resources(), so I think this should probably still depend on CONFIG_OF?
Rob Herring
reviewerQuoted 11 lines · Bjorn Helgaas
Hi Rob,
Quoted 7 lines · Rob Herring
Add
COMPILE_TESTon driver config options with it. Some ARM drivers still have arch dependencies, so we have to keep those dependent on ARM.Cc Lorenzo Pieralisi <[email protected]>Cc Bjorn Helgaas <[email protected]>Signed-off-by Rob Herring <[email protected]>
Quoted 7 lines
drivers/pci/host/Kconfig config PCIE_IPROC_MSI · line 149
Quoted 5 lines
config
PCIE_ALTERA
bool "Altera PCIe controller"drivers/pci/host/Kconfig +1
-2- depends on ARM || NIOS2 - depends on OF_PCI + depends on ARM || NIOS2 || COMPILE_TESTDid you intend to drop the
OF_PCIdependency?
No, that should have been removed when OF_PCI was in commit 4670d610d592 ("PCI: Move OF-related PCI functions into PCI core").
Quoted 5 lines
I see that
CONFIG_OF_PCIdoesn't exist, so that looks bogus.But
drivers/pci/host/pcie-altera.cstill usesdevm_of_pci_get_host_bridge_resources(), so I think this should probably still depend onCONFIG_OF?
There's an empty version so it shouldn't matter.
Rob
Quoted 7 lines · Rob Herring
Add
COMPILE_TESTon driver config options with it. Some ARM drivers still have arch dependencies, so we have to keep those dependent on ARM.Cc Lorenzo Pieralisi <[email protected]>Cc Bjorn Helgaas <[email protected]>Signed-off-by Rob Herring <[email protected]>
This patch has the undesirable side effect that it selects PCI_DOMAINS for sparc32:allmodconfig, which in turn results in
drivers/ata/pata_ali.c: In function 'ali_init_chipset':drivers/ata/pata_ali.c:469:38: error:
implicit declaration of function 'pci_domain_nr'; did you mean 'pci_iomap_wc'?
Unfortunately, 37bd62d224c82 ("PCI: Enable PCI_DOMAINS along with generic PCI host controller") has pretty much the same result. No idea how to fix the problem, so I won't even try.
Guenter
Quoted 253 lines
---
v4: Drop iProc hunksdrivers/pci/dwc/Kconfig | 24 ++++++++++++------------ drivers/pci/host/Kconfig | 31 ++++++++++++++----------------- 2 files changed, 26 insertions(+), 29 deletions(-)drivers/pci/dwc/Kconfig +12
-12@@ -64,21 +64,21 @@ config PCIE_DW_PLAT config PCI_EXYNOS bool "Samsung Exynos PCIe controller" - depends on SOC_EXYNOS5440 + depends on SOC_EXYNOS5440 || COMPILE_TEST depends on PCI_MSI_IRQ_DOMAIN select PCIEPORTBUS select PCIE_DW_HOST config PCI_IMX6 bool "Freescale i.MX6 PCIe controller" - depends on SOC_IMX6Q + depends on SOC_IMX6Q || (ARM && COMPILE_TEST) depends on PCI_MSI_IRQ_DOMAIN select PCIEPORTBUS select PCIE_DW_HOST config PCIE_SPEAR13XX bool "STMicroelectronics SPEAr PCIe controller" - depends on ARCH_SPEAR13XX + depends on ARCH_SPEAR13XX || COMPILE_TEST depends on PCI_MSI_IRQ_DOMAIN select PCIEPORTBUS select PCIE_DW_HOST@@ -87,7 +87,7 @@ config PCIE_SPEAR13XX config PCI_KEYSTONE bool "TI Keystone PCIe controller" - depends on ARCH_KEYSTONE + depends on ARCH_KEYSTONE || (ARM && COMPILE_TEST) depends on PCI_MSI_IRQ_DOMAIN select PCIEPORTBUS select PCIE_DW_HOST@@ -99,7 +99,7 @@ config PCI_KEYSTONE config PCI_LAYERSCAPE bool "Freescale Layerscape PCIe controller" - depends on OF && (ARM || ARCH_LAYERSCAPE) + depends on OF && (ARM || ARCH_LAYERSCAPE || COMPILE_TEST) depends on PCI_MSI_IRQ_DOMAIN select MFD_SYSCON select PCIE_DW_HOST@@ -107,7 +107,7 @@ config PCI_LAYERSCAPE Say Y here if you want PCIe controller support on Layerscape SoCs. config PCI_HISI - depends on OF && ARM64 + depends on OF && (ARM64 || COMPILE_TEST) bool "HiSilicon Hip05 and Hip06 SoCs PCIe controllers" depends on PCI_MSI_IRQ_DOMAIN select PCIEPORTBUS@@ -119,7 +119,7 @@ config PCI_HISI config PCIE_QCOM bool "Qualcomm PCIe controller" - depends on ARCH_QCOM && OF + depends on OF && (ARCH_QCOM || COMPILE_TEST) depends on PCI_MSI_IRQ_DOMAIN select PCIEPORTBUS select PCIE_DW_HOST@@ -130,7 +130,7 @@ config PCIE_QCOM config PCIE_ARMADA_8K bool "Marvell Armada-8K PCIe controller" - depends on ARCH_MVEBU + depends on ARCH_MVEBU || COMPILE_TEST depends on PCI_MSI_IRQ_DOMAIN select PCIEPORTBUS select PCIE_DW_HOST@@ -145,7 +145,7 @@ config PCIE_ARTPEC6 config PCIE_ARTPEC6_HOST bool "Axis ARTPEC-6 PCIe controller Host Mode" - depends on MACH_ARTPEC6 + depends on MACH_ARTPEC6 || COMPILE_TEST depends on PCI_MSI_IRQ_DOMAIN select PCIEPORTBUS select PCIE_DW_HOST@@ -156,7 +156,7 @@ config PCIE_ARTPEC6_HOST config PCIE_ARTPEC6_EP bool "Axis ARTPEC-6 PCIe controller Endpoint Mode" - depends on MACH_ARTPEC6 + depends on MACH_ARTPEC6 || COMPILE_TEST depends on PCI_ENDPOINT select PCIE_DW_EP select PCIE_ARTPEC6@@ -165,7 +165,7 @@ config PCIE_ARTPEC6_EP endpoint mode. This uses the DesignWare core. config PCIE_KIRIN - depends on OF && ARM64 + depends on OF && (ARM64 || COMPILE_TEST) bool "HiSilicon Kirin series SoCs PCIe controllers" depends on PCI_MSI_IRQ_DOMAIN select PCIEPORTBUS@@ -176,7 +176,7 @@ config PCIE_KIRIN config PCIE_HISI_STB bool "HiSilicon STB SoCs PCIe controllers" - depends on ARCH_HISI + depends on ARCH_HISI || COMPILE_TEST depends on PCI_MSI_IRQ_DOMAIN select PCIEPORTBUS select PCIE_DW_HOSTdrivers/pci/host/Kconfig +14
-17@@ -5,13 +5,13 @@ menu "PCI host controller drivers" config PCI_MVEBU bool "Marvell EBU PCIe controller" - depends on ARCH_MVEBU || ARCH_DOVE + depends on ARCH_MVEBU || ARCH_DOVE || COMPILE_TEST depends on ARM depends on OF config PCI_AARDVARK bool "Aardvark PCIe controller" - depends on ARCH_MVEBU && ARM64 + depends on (ARCH_MVEBU && ARM64) || COMPILE_TEST depends on OF depends on PCI_MSI_IRQ_DOMAIN help@@ -21,7 +21,7 @@ config PCI_AARDVARK config PCIE_XILINX_NWL bool "NWL PCIe Core" - depends on ARCH_ZYNQMP + depends on ARCH_ZYNQMP || COMPILE_TEST depends on PCI_MSI_IRQ_DOMAIN help Say 'Y' here if you want kernel support for Xilinx@@ -32,12 +32,11 @@ config PCIE_XILINX_NWL config PCI_FTPCI100 bool "Faraday Technology FTPCI100 PCI controller" depends on OF - depends on ARM default ARCH_GEMINI config PCI_TEGRA bool "NVIDIA Tegra PCIe controller" - depends on ARCH_TEGRA + depends on ARCH_TEGRA || COMPILE_TEST depends on PCI_MSI_IRQ_DOMAIN help Say Y here if you want support for the PCIe host controller found@@ -45,8 +44,8 @@ config PCI_TEGRA config PCI_RCAR_GEN2 bool "Renesas R-Car Gen2 Internal PCI controller" - depends on ARM depends on ARCH_RENESAS || COMPILE_TEST + depends on ARM help Say Y here if you want internal PCI support on R-Car Gen2 SoC. There are 3 internal PCI controllers available with a single@@ -54,7 +53,7 @@ config PCI_RCAR_GEN2 config PCIE_RCAR bool "Renesas R-Car PCIe controller" - depends on ARCH_RENESAS || (ARM && COMPILE_TEST) + depends on ARCH_RENESAS || COMPILE_TEST depends on PCI_MSI_IRQ_DOMAIN help Say Y here if you want PCIe controller support on R-Car SoCs.@@ -65,7 +64,7 @@ config PCI_HOST_COMMON config PCI_HOST_GENERIC bool "Generic PCI host controller" - depends on (ARM || ARM64) && OF + depends on OF select PCI_HOST_COMMON select IRQ_DOMAIN help@@ -74,14 +73,14 @@ config PCI_HOST_GENERIC config PCIE_XILINX bool "Xilinx AXI PCIe host bridge support" - depends on ARCH_ZYNQ || MICROBLAZE || (MIPS && PCI_DRIVERS_GENERIC) + depends on ARCH_ZYNQ || MICROBLAZE || (MIPS && PCI_DRIVERS_GENERIC) || COMPILE_TEST help Say 'Y' here if you want kernel to support the Xilinx AXI PCIe Host Bridge driver. config PCI_XGENE bool "X-Gene PCIe controller" - depends on ARM64 + depends on ARM64 || COMPILE_TEST depends on OF || (ACPI && PCI_QUIRKS) select PCIEPORTBUS help@@ -101,7 +100,7 @@ config PCI_XGENE_MSI config PCI_V3_SEMI bool "V3 Semiconductor PCI controller" depends on OF - depends on ARM + depends on ARM || COMPILE_TEST default ARCH_INTEGRATOR_AP config PCI_VERSATILE@@ -147,8 +146,7 @@ config PCIE_IPROC_MSI config PCIE_ALTERA bool "Altera PCIe controller" - depends on ARM || NIOS2 - depends on OF_PCI + depends on ARM || NIOS2 || COMPILE_TEST select PCI_DOMAINS help Say Y here if you want to enable PCIe controller support on Altera@@ -164,7 +162,7 @@ config PCIE_ALTERA_MSI config PCI_HOST_THUNDER_PEM bool "Cavium Thunder PCIe controller to off-chip devices" - depends on ARM64 + depends on ARM64 || COMPILE_TEST depends on OF || (ACPI && PCI_QUIRKS) select PCI_HOST_COMMON help@@ -172,7 +170,7 @@ config PCI_HOST_THUNDER_PEM config PCI_HOST_THUNDER_ECAM bool "Cavium Thunder ECAM controller to on-chip devices on pass-1.x silicon" - depends on ARM64 + depends on ARM64 || COMPILE_TEST depends on OF || (ACPI && PCI_QUIRKS) select PCI_HOST_COMMON help@@ -191,9 +189,8 @@ config PCIE_ROCKCHIP config PCIE_MEDIATEK bool "MediaTek PCIe controller" - depends on (ARM || ARM64) && (ARCH_MEDIATEK || COMPILE_TEST) + depends on ARCH_MEDIATEK || COMPILE_TEST depends on OF - depends on PCI select PCIEPORTBUS help Say Y here if you want to enable PCIe controller support on
[+Jan, Ley Foon, RMK]
Quoted 12 lines · Guenter Roeck
Quoted 7 lines · Rob Herring
Add
COMPILE_TESTon driver config options with it. Some ARM drivers still have arch dependencies, so we have to keep those dependent on ARM.Cc Lorenzo Pieralisi <[email protected]>Cc Bjorn Helgaas <[email protected]>Signed-off-by Rob Herring <[email protected]>This patch has the undesirable side effect that it selects
PCI_DOMAINSfor sparc32:allmodconfig, which in turn results in
Quoted 7 lines
drivers/ata/pata_ali.c: In function 'ali_init_chipset':drivers/ata/pata_ali.c:469:38: error:
implicit declaration of function 'pci_domain_nr'; did you mean 'pci_iomap_wc'?Unfortunately,
37bd62d224c82("PCI: EnablePCI_DOMAINSalong with generic PCI host controller") has pretty much the same result. No idea how to fix the problem, so I won't even try.
Sorry about that.
One option would consist in removing all PCI_DOMAINS selection from drivers/pci/controller/Kconfig and delegate it to arches even though this would force PCI_DOMAINS selection on all ARM platforms (it is already selected for ARCH_MULTIPLATFORM).
Or we add back arch dependency to the relevant host bridges.
Everything else I have in mind seems overkill to me given that this patch was added to improve test coverage (we could add a default pci_domain_nr() stub - weak or #define - that returns 0 in case arches do not provide an implementation but do we really want to do that ?).
Thoughts appreciated.
Lorenzo
Quoted 255 lines
Guenter
Quoted 253 lines
---
v4: Drop iProc hunksdrivers/pci/dwc/Kconfig | 24 ++++++++++++------------ drivers/pci/host/Kconfig | 31 ++++++++++++++----------------- 2 files changed, 26 insertions(+), 29 deletions(-)drivers/pci/dwc/Kconfig +12
-12@@ -64,21 +64,21 @@ config PCIE_DW_PLAT config PCI_EXYNOS bool "Samsung Exynos PCIe controller" - depends on SOC_EXYNOS5440 + depends on SOC_EXYNOS5440 || COMPILE_TEST depends on PCI_MSI_IRQ_DOMAIN select PCIEPORTBUS select PCIE_DW_HOST config PCI_IMX6 bool "Freescale i.MX6 PCIe controller" - depends on SOC_IMX6Q + depends on SOC_IMX6Q || (ARM && COMPILE_TEST) depends on PCI_MSI_IRQ_DOMAIN select PCIEPORTBUS select PCIE_DW_HOST config PCIE_SPEAR13XX bool "STMicroelectronics SPEAr PCIe controller" - depends on ARCH_SPEAR13XX + depends on ARCH_SPEAR13XX || COMPILE_TEST depends on PCI_MSI_IRQ_DOMAIN select PCIEPORTBUS select PCIE_DW_HOST@@ -87,7 +87,7 @@ config PCIE_SPEAR13XX config PCI_KEYSTONE bool "TI Keystone PCIe controller" - depends on ARCH_KEYSTONE + depends on ARCH_KEYSTONE || (ARM && COMPILE_TEST) depends on PCI_MSI_IRQ_DOMAIN select PCIEPORTBUS select PCIE_DW_HOST@@ -99,7 +99,7 @@ config PCI_KEYSTONE config PCI_LAYERSCAPE bool "Freescale Layerscape PCIe controller" - depends on OF && (ARM || ARCH_LAYERSCAPE) + depends on OF && (ARM || ARCH_LAYERSCAPE || COMPILE_TEST) depends on PCI_MSI_IRQ_DOMAIN select MFD_SYSCON select PCIE_DW_HOST@@ -107,7 +107,7 @@ config PCI_LAYERSCAPE Say Y here if you want PCIe controller support on Layerscape SoCs. config PCI_HISI - depends on OF && ARM64 + depends on OF && (ARM64 || COMPILE_TEST) bool "HiSilicon Hip05 and Hip06 SoCs PCIe controllers" depends on PCI_MSI_IRQ_DOMAIN select PCIEPORTBUS@@ -119,7 +119,7 @@ config PCI_HISI config PCIE_QCOM bool "Qualcomm PCIe controller" - depends on ARCH_QCOM && OF + depends on OF && (ARCH_QCOM || COMPILE_TEST) depends on PCI_MSI_IRQ_DOMAIN select PCIEPORTBUS select PCIE_DW_HOST@@ -130,7 +130,7 @@ config PCIE_QCOM config PCIE_ARMADA_8K bool "Marvell Armada-8K PCIe controller" - depends on ARCH_MVEBU + depends on ARCH_MVEBU || COMPILE_TEST depends on PCI_MSI_IRQ_DOMAIN select PCIEPORTBUS select PCIE_DW_HOST@@ -145,7 +145,7 @@ config PCIE_ARTPEC6 config PCIE_ARTPEC6_HOST bool "Axis ARTPEC-6 PCIe controller Host Mode" - depends on MACH_ARTPEC6 + depends on MACH_ARTPEC6 || COMPILE_TEST depends on PCI_MSI_IRQ_DOMAIN select PCIEPORTBUS select PCIE_DW_HOST@@ -156,7 +156,7 @@ config PCIE_ARTPEC6_HOST config PCIE_ARTPEC6_EP bool "Axis ARTPEC-6 PCIe controller Endpoint Mode" - depends on MACH_ARTPEC6 + depends on MACH_ARTPEC6 || COMPILE_TEST depends on PCI_ENDPOINT select PCIE_DW_EP select PCIE_ARTPEC6@@ -165,7 +165,7 @@ config PCIE_ARTPEC6_EP endpoint mode. This uses the DesignWare core. config PCIE_KIRIN - depends on OF && ARM64 + depends on OF && (ARM64 || COMPILE_TEST) bool "HiSilicon Kirin series SoCs PCIe controllers" depends on PCI_MSI_IRQ_DOMAIN select PCIEPORTBUS@@ -176,7 +176,7 @@ config PCIE_KIRIN config PCIE_HISI_STB bool "HiSilicon STB SoCs PCIe controllers" - depends on ARCH_HISI + depends on ARCH_HISI || COMPILE_TEST depends on PCI_MSI_IRQ_DOMAIN select PCIEPORTBUS select PCIE_DW_HOSTdrivers/pci/host/Kconfig +14
-17@@ -5,13 +5,13 @@ menu "PCI host controller drivers" config PCI_MVEBU bool "Marvell EBU PCIe controller" - depends on ARCH_MVEBU || ARCH_DOVE + depends on ARCH_MVEBU || ARCH_DOVE || COMPILE_TEST depends on ARM depends on OF config PCI_AARDVARK bool "Aardvark PCIe controller" - depends on ARCH_MVEBU && ARM64 + depends on (ARCH_MVEBU && ARM64) || COMPILE_TEST depends on OF depends on PCI_MSI_IRQ_DOMAIN help@@ -21,7 +21,7 @@ config PCI_AARDVARK config PCIE_XILINX_NWL bool "NWL PCIe Core" - depends on ARCH_ZYNQMP + depends on ARCH_ZYNQMP || COMPILE_TEST depends on PCI_MSI_IRQ_DOMAIN help Say 'Y' here if you want kernel support for Xilinx@@ -32,12 +32,11 @@ config PCIE_XILINX_NWL config PCI_FTPCI100 bool "Faraday Technology FTPCI100 PCI controller" depends on OF - depends on ARM default ARCH_GEMINI config PCI_TEGRA bool "NVIDIA Tegra PCIe controller" - depends on ARCH_TEGRA + depends on ARCH_TEGRA || COMPILE_TEST depends on PCI_MSI_IRQ_DOMAIN help Say Y here if you want support for the PCIe host controller found@@ -45,8 +44,8 @@ config PCI_TEGRA config PCI_RCAR_GEN2 bool "Renesas R-Car Gen2 Internal PCI controller" - depends on ARM depends on ARCH_RENESAS || COMPILE_TEST + depends on ARM help Say Y here if you want internal PCI support on R-Car Gen2 SoC. There are 3 internal PCI controllers available with a single@@ -54,7 +53,7 @@ config PCI_RCAR_GEN2 config PCIE_RCAR bool "Renesas R-Car PCIe controller" - depends on ARCH_RENESAS || (ARM && COMPILE_TEST) + depends on ARCH_RENESAS || COMPILE_TEST depends on PCI_MSI_IRQ_DOMAIN help Say Y here if you want PCIe controller support on R-Car SoCs.@@ -65,7 +64,7 @@ config PCI_HOST_COMMON config PCI_HOST_GENERIC bool "Generic PCI host controller" - depends on (ARM || ARM64) && OF + depends on OF select PCI_HOST_COMMON select IRQ_DOMAIN help@@ -74,14 +73,14 @@ config PCI_HOST_GENERIC config PCIE_XILINX bool "Xilinx AXI PCIe host bridge support" - depends on ARCH_ZYNQ || MICROBLAZE || (MIPS && PCI_DRIVERS_GENERIC) + depends on ARCH_ZYNQ || MICROBLAZE || (MIPS && PCI_DRIVERS_GENERIC) || COMPILE_TEST help Say 'Y' here if you want kernel to support the Xilinx AXI PCIe Host Bridge driver. config PCI_XGENE bool "X-Gene PCIe controller" - depends on ARM64 + depends on ARM64 || COMPILE_TEST depends on OF || (ACPI && PCI_QUIRKS) select PCIEPORTBUS help@@ -101,7 +100,7 @@ config PCI_XGENE_MSI config PCI_V3_SEMI bool "V3 Semiconductor PCI controller" depends on OF - depends on ARM + depends on ARM || COMPILE_TEST default ARCH_INTEGRATOR_AP config PCI_VERSATILE@@ -147,8 +146,7 @@ config PCIE_IPROC_MSI config PCIE_ALTERA bool "Altera PCIe controller" - depends on ARM || NIOS2 - depends on OF_PCI + depends on ARM || NIOS2 || COMPILE_TEST select PCI_DOMAINS help Say Y here if you want to enable PCIe controller support on Altera@@ -164,7 +162,7 @@ config PCIE_ALTERA_MSI config PCI_HOST_THUNDER_PEM bool "Cavium Thunder PCIe controller to off-chip devices" - depends on ARM64 + depends on ARM64 || COMPILE_TEST depends on OF || (ACPI && PCI_QUIRKS) select PCI_HOST_COMMON help@@ -172,7 +170,7 @@ config PCI_HOST_THUNDER_PEM config PCI_HOST_THUNDER_ECAM bool "Cavium Thunder ECAM controller to on-chip devices on pass-1.x silicon" - depends on ARM64 + depends on ARM64 || COMPILE_TEST depends on OF || (ACPI && PCI_QUIRKS) select PCI_HOST_COMMON help@@ -191,9 +189,8 @@ config PCIE_ROCKCHIP config PCIE_MEDIATEK bool "MediaTek PCIe controller" - depends on (ARM || ARM64) && (ARCH_MEDIATEK || COMPILE_TEST) + depends on ARCH_MEDIATEK || COMPILE_TEST depends on OF - depends on PCI select PCIEPORTBUS help Say Y here if you want to enable PCIe controller support on
Quoted 37 lines · Lorenzo Pieralisi
[+Jan, Ley Foon, RMK]
Quoted 12 lines · Guenter Roeck
Quoted 7 lines · Rob Herring
Add
COMPILE_TESTon driver config options with it. Some ARM drivers still have arch dependencies, so we have to keep those dependent on ARM.Cc Lorenzo Pieralisi <[email protected]>Cc Bjorn Helgaas <[email protected]>Signed-off-by Rob Herring <[email protected]>This patch has the undesirable side effect that it selects
PCI_DOMAINSfor sparc32:allmodconfig, which in turn results inQuoted 7 lines
drivers/ata/pata_ali.c: In function 'ali_init_chipset':drivers/ata/pata_ali.c:469:38: error:
implicit declaration of function 'pci_domain_nr'; did you mean 'pci_iomap_wc'?Unfortunately,
37bd62d224c82("PCI: EnablePCI_DOMAINSalong with generic PCI host controller") has pretty much the same result. No idea how to fix the problem, so I won't even try.Sorry about that.
One option would consist in removing all
PCI_DOMAINSselection fromdrivers/pci/controller/Kconfigand delegate it to arches even though this would forcePCI_DOMAINSselection on all ARM platforms (it is already selected forARCH_MULTIPLATFORM).Or we add back arch dependency to the relevant host bridges.
Everything else I have in mind seems overkill to me given that this patch was added to improve test coverage (we could add a default
pci_domain_nr()stub - weak or #define - that returns 0 in case arches do not provide an implementation but do we really want to do that ?).
Quoted 4 lines
Thoughts appreciated.
From the definition of
PCI_DOMAINS, I suspect the original idea was that
drivers should depend on it, not select it. Especially auto-selecting it with PCI_HOST_GENERIC seems like a bad idea to me. However, that is just me. I'll leave it up to Bjorn to decide what if anything he wants to do about it.
Guenter
Quoted 257 lines
Lorenzo
Quoted 255 lines
Guenter
Quoted 253 lines
---
v4: Drop iProc hunksdrivers/pci/dwc/Kconfig | 24 ++++++++++++------------ drivers/pci/host/Kconfig | 31 ++++++++++++++----------------- 2 files changed, 26 insertions(+), 29 deletions(-)drivers/pci/dwc/Kconfig +12
-12@@ -64,21 +64,21 @@ config PCIE_DW_PLAT config PCI_EXYNOS bool "Samsung Exynos PCIe controller" - depends on SOC_EXYNOS5440 + depends on SOC_EXYNOS5440 || COMPILE_TEST depends on PCI_MSI_IRQ_DOMAIN select PCIEPORTBUS select PCIE_DW_HOST config PCI_IMX6 bool "Freescale i.MX6 PCIe controller" - depends on SOC_IMX6Q + depends on SOC_IMX6Q || (ARM && COMPILE_TEST) depends on PCI_MSI_IRQ_DOMAIN select PCIEPORTBUS select PCIE_DW_HOST config PCIE_SPEAR13XX bool "STMicroelectronics SPEAr PCIe controller" - depends on ARCH_SPEAR13XX + depends on ARCH_SPEAR13XX || COMPILE_TEST depends on PCI_MSI_IRQ_DOMAIN select PCIEPORTBUS select PCIE_DW_HOST@@ -87,7 +87,7 @@ config PCIE_SPEAR13XX config PCI_KEYSTONE bool "TI Keystone PCIe controller" - depends on ARCH_KEYSTONE + depends on ARCH_KEYSTONE || (ARM && COMPILE_TEST) depends on PCI_MSI_IRQ_DOMAIN select PCIEPORTBUS select PCIE_DW_HOST@@ -99,7 +99,7 @@ config PCI_KEYSTONE config PCI_LAYERSCAPE bool "Freescale Layerscape PCIe controller" - depends on OF && (ARM || ARCH_LAYERSCAPE) + depends on OF && (ARM || ARCH_LAYERSCAPE || COMPILE_TEST) depends on PCI_MSI_IRQ_DOMAIN select MFD_SYSCON select PCIE_DW_HOST@@ -107,7 +107,7 @@ config PCI_LAYERSCAPE Say Y here if you want PCIe controller support on Layerscape SoCs. config PCI_HISI - depends on OF && ARM64 + depends on OF && (ARM64 || COMPILE_TEST) bool "HiSilicon Hip05 and Hip06 SoCs PCIe controllers" depends on PCI_MSI_IRQ_DOMAIN select PCIEPORTBUS@@ -119,7 +119,7 @@ config PCI_HISI config PCIE_QCOM bool "Qualcomm PCIe controller" - depends on ARCH_QCOM && OF + depends on OF && (ARCH_QCOM || COMPILE_TEST) depends on PCI_MSI_IRQ_DOMAIN select PCIEPORTBUS select PCIE_DW_HOST@@ -130,7 +130,7 @@ config PCIE_QCOM config PCIE_ARMADA_8K bool "Marvell Armada-8K PCIe controller" - depends on ARCH_MVEBU + depends on ARCH_MVEBU || COMPILE_TEST depends on PCI_MSI_IRQ_DOMAIN select PCIEPORTBUS select PCIE_DW_HOST@@ -145,7 +145,7 @@ config PCIE_ARTPEC6 config PCIE_ARTPEC6_HOST bool "Axis ARTPEC-6 PCIe controller Host Mode" - depends on MACH_ARTPEC6 + depends on MACH_ARTPEC6 || COMPILE_TEST depends on PCI_MSI_IRQ_DOMAIN select PCIEPORTBUS select PCIE_DW_HOST@@ -156,7 +156,7 @@ config PCIE_ARTPEC6_HOST config PCIE_ARTPEC6_EP bool "Axis ARTPEC-6 PCIe controller Endpoint Mode" - depends on MACH_ARTPEC6 + depends on MACH_ARTPEC6 || COMPILE_TEST depends on PCI_ENDPOINT select PCIE_DW_EP select PCIE_ARTPEC6@@ -165,7 +165,7 @@ config PCIE_ARTPEC6_EP endpoint mode. This uses the DesignWare core. config PCIE_KIRIN - depends on OF && ARM64 + depends on OF && (ARM64 || COMPILE_TEST) bool "HiSilicon Kirin series SoCs PCIe controllers" depends on PCI_MSI_IRQ_DOMAIN select PCIEPORTBUS@@ -176,7 +176,7 @@ config PCIE_KIRIN config PCIE_HISI_STB bool "HiSilicon STB SoCs PCIe controllers" - depends on ARCH_HISI + depends on ARCH_HISI || COMPILE_TEST depends on PCI_MSI_IRQ_DOMAIN select PCIEPORTBUS select PCIE_DW_HOSTdrivers/pci/host/Kconfig +14
-17@@ -5,13 +5,13 @@ menu "PCI host controller drivers" config PCI_MVEBU bool "Marvell EBU PCIe controller" - depends on ARCH_MVEBU || ARCH_DOVE + depends on ARCH_MVEBU || ARCH_DOVE || COMPILE_TEST depends on ARM depends on OF config PCI_AARDVARK bool "Aardvark PCIe controller" - depends on ARCH_MVEBU && ARM64 + depends on (ARCH_MVEBU && ARM64) || COMPILE_TEST depends on OF depends on PCI_MSI_IRQ_DOMAIN help@@ -21,7 +21,7 @@ config PCI_AARDVARK config PCIE_XILINX_NWL bool "NWL PCIe Core" - depends on ARCH_ZYNQMP + depends on ARCH_ZYNQMP || COMPILE_TEST depends on PCI_MSI_IRQ_DOMAIN help Say 'Y' here if you want kernel support for Xilinx@@ -32,12 +32,11 @@ config PCIE_XILINX_NWL config PCI_FTPCI100 bool "Faraday Technology FTPCI100 PCI controller" depends on OF - depends on ARM default ARCH_GEMINI config PCI_TEGRA bool "NVIDIA Tegra PCIe controller" - depends on ARCH_TEGRA + depends on ARCH_TEGRA || COMPILE_TEST depends on PCI_MSI_IRQ_DOMAIN help Say Y here if you want support for the PCIe host controller found@@ -45,8 +44,8 @@ config PCI_TEGRA config PCI_RCAR_GEN2 bool "Renesas R-Car Gen2 Internal PCI controller" - depends on ARM depends on ARCH_RENESAS || COMPILE_TEST + depends on ARM help Say Y here if you want internal PCI support on R-Car Gen2 SoC. There are 3 internal PCI controllers available with a single@@ -54,7 +53,7 @@ config PCI_RCAR_GEN2 config PCIE_RCAR bool "Renesas R-Car PCIe controller" - depends on ARCH_RENESAS || (ARM && COMPILE_TEST) + depends on ARCH_RENESAS || COMPILE_TEST depends on PCI_MSI_IRQ_DOMAIN help Say Y here if you want PCIe controller support on R-Car SoCs.@@ -65,7 +64,7 @@ config PCI_HOST_COMMON config PCI_HOST_GENERIC bool "Generic PCI host controller" - depends on (ARM || ARM64) && OF + depends on OF select PCI_HOST_COMMON select IRQ_DOMAIN help@@ -74,14 +73,14 @@ config PCI_HOST_GENERIC config PCIE_XILINX bool "Xilinx AXI PCIe host bridge support" - depends on ARCH_ZYNQ || MICROBLAZE || (MIPS && PCI_DRIVERS_GENERIC) + depends on ARCH_ZYNQ || MICROBLAZE || (MIPS && PCI_DRIVERS_GENERIC) || COMPILE_TEST help Say 'Y' here if you want kernel to support the Xilinx AXI PCIe Host Bridge driver. config PCI_XGENE bool "X-Gene PCIe controller" - depends on ARM64 + depends on ARM64 || COMPILE_TEST depends on OF || (ACPI && PCI_QUIRKS) select PCIEPORTBUS help@@ -101,7 +100,7 @@ config PCI_XGENE_MSI config PCI_V3_SEMI bool "V3 Semiconductor PCI controller" depends on OF - depends on ARM + depends on ARM || COMPILE_TEST default ARCH_INTEGRATOR_AP config PCI_VERSATILE@@ -147,8 +146,7 @@ config PCIE_IPROC_MSI config PCIE_ALTERA bool "Altera PCIe controller" - depends on ARM || NIOS2 - depends on OF_PCI + depends on ARM || NIOS2 || COMPILE_TEST select PCI_DOMAINS help Say Y here if you want to enable PCIe controller support on Altera@@ -164,7 +162,7 @@ config PCIE_ALTERA_MSI config PCI_HOST_THUNDER_PEM bool "Cavium Thunder PCIe controller to off-chip devices" - depends on ARM64 + depends on ARM64 || COMPILE_TEST depends on OF || (ACPI && PCI_QUIRKS) select PCI_HOST_COMMON help@@ -172,7 +170,7 @@ config PCI_HOST_THUNDER_PEM config PCI_HOST_THUNDER_ECAM bool "Cavium Thunder ECAM controller to on-chip devices on pass-1.x silicon" - depends on ARM64 + depends on ARM64 || COMPILE_TEST depends on OF || (ACPI && PCI_QUIRKS) select PCI_HOST_COMMON help@@ -191,9 +189,8 @@ config PCIE_ROCKCHIP config PCIE_MEDIATEK bool "MediaTek PCIe controller" - depends on (ARM || ARM64) && (ARCH_MEDIATEK || COMPILE_TEST) + depends on ARCH_MEDIATEK || COMPILE_TEST depends on OF - depends on PCI select PCIEPORTBUS help Say Y here if you want to enable PCIe controller support on
Quoted 38 lines · Guenter Roeck
Quoted 37 lines · Lorenzo Pieralisi
[+Jan, Ley Foon, RMK]
Quoted 12 lines · Guenter Roeck
Quoted 7 lines · Rob Herring
Add
COMPILE_TESTon driver config options with it. Some ARM drivers still have arch dependencies, so we have to keep those dependent on ARM.Cc Lorenzo Pieralisi <[email protected]>Cc Bjorn Helgaas <[email protected]>Signed-off-by Rob Herring <[email protected]>This patch has the undesirable side effect that it selects
PCI_DOMAINSfor sparc32:allmodconfig, which in turn results inQuoted 7 lines
drivers/ata/pata_ali.c: In function 'ali_init_chipset':drivers/ata/pata_ali.c:469:38: error:
implicit declaration of function 'pci_domain_nr'; did you mean 'pci_iomap_wc'?Unfortunately,
37bd62d224c82("PCI: EnablePCI_DOMAINSalong with generic PCI host controller") has pretty much the same result. No idea how to fix the problem, so I won't even try.Sorry about that.
One option would consist in removing all
PCI_DOMAINSselection fromdrivers/pci/controller/Kconfigand delegate it to arches even though this would forcePCI_DOMAINSselection on all ARM platforms (it is already selected forARCH_MULTIPLATFORM).Or we add back arch dependency to the relevant host bridges.
Everything else I have in mind seems overkill to me given that this patch was added to improve test coverage (we could add a default
pci_domain_nr()stub - weak or #define - that returns 0 in case arches do not provide an implementation but do we really want to do that ?).
Quoted 5 lines
Quoted 2 lines
Thoughts appreciated.
From the definition of
PCI_DOMAINS, I suspect the original idea was that drivers should depend on it, not select it.
I do not think that's the case, a host controller should not really depend on it.
Quoted 3 lines
Especially auto-selecting it with
PCI_HOST_GENERICseems like a bad idea to me. However, that is just me. I'll leave it up to Bjorn to decide what if anything he wants to do about it.
I think that on ARM (32-bit) systems it is supposed to be selected so that it is not pulled in if not "needed". As I said I could make it:
def_bool PCI
on ARM but my worry is that it has consequences on legacy ARM PCI host drivers in arch/arm, I really do not know what happens if I enable it by default.
Another option would consist in making PCI_DOMAINS a visible menu option on ARM, so that it can be configured in the kernel if needed, in that case I can safely remove all selection from drivers/pci/controller/Kconfig; I am not a big fan of this solution either but I think that's the least evil.
I do not think there is any other quick option available.
Lorenzo
Quoted 260 lines
Guenter
Quoted 257 lines
Lorenzo
Quoted 255 lines
Guenter
Quoted 253 lines
---
v4: Drop iProc hunksdrivers/pci/dwc/Kconfig | 24 ++++++++++++------------ drivers/pci/host/Kconfig | 31 ++++++++++++++----------------- 2 files changed, 26 insertions(+), 29 deletions(-)drivers/pci/dwc/Kconfig +12
-12@@ -64,21 +64,21 @@ config PCIE_DW_PLAT config PCI_EXYNOS bool "Samsung Exynos PCIe controller" - depends on SOC_EXYNOS5440 + depends on SOC_EXYNOS5440 || COMPILE_TEST depends on PCI_MSI_IRQ_DOMAIN select PCIEPORTBUS select PCIE_DW_HOST config PCI_IMX6 bool "Freescale i.MX6 PCIe controller" - depends on SOC_IMX6Q + depends on SOC_IMX6Q || (ARM && COMPILE_TEST) depends on PCI_MSI_IRQ_DOMAIN select PCIEPORTBUS select PCIE_DW_HOST config PCIE_SPEAR13XX bool "STMicroelectronics SPEAr PCIe controller" - depends on ARCH_SPEAR13XX + depends on ARCH_SPEAR13XX || COMPILE_TEST depends on PCI_MSI_IRQ_DOMAIN select PCIEPORTBUS select PCIE_DW_HOST@@ -87,7 +87,7 @@ config PCIE_SPEAR13XX config PCI_KEYSTONE bool "TI Keystone PCIe controller" - depends on ARCH_KEYSTONE + depends on ARCH_KEYSTONE || (ARM && COMPILE_TEST) depends on PCI_MSI_IRQ_DOMAIN select PCIEPORTBUS select PCIE_DW_HOST@@ -99,7 +99,7 @@ config PCI_KEYSTONE config PCI_LAYERSCAPE bool "Freescale Layerscape PCIe controller" - depends on OF && (ARM || ARCH_LAYERSCAPE) + depends on OF && (ARM || ARCH_LAYERSCAPE || COMPILE_TEST) depends on PCI_MSI_IRQ_DOMAIN select MFD_SYSCON select PCIE_DW_HOST@@ -107,7 +107,7 @@ config PCI_LAYERSCAPE Say Y here if you want PCIe controller support on Layerscape SoCs. config PCI_HISI - depends on OF && ARM64 + depends on OF && (ARM64 || COMPILE_TEST) bool "HiSilicon Hip05 and Hip06 SoCs PCIe controllers" depends on PCI_MSI_IRQ_DOMAIN select PCIEPORTBUS@@ -119,7 +119,7 @@ config PCI_HISI config PCIE_QCOM bool "Qualcomm PCIe controller" - depends on ARCH_QCOM && OF + depends on OF && (ARCH_QCOM || COMPILE_TEST) depends on PCI_MSI_IRQ_DOMAIN select PCIEPORTBUS select PCIE_DW_HOST@@ -130,7 +130,7 @@ config PCIE_QCOM config PCIE_ARMADA_8K bool "Marvell Armada-8K PCIe controller" - depends on ARCH_MVEBU + depends on ARCH_MVEBU || COMPILE_TEST depends on PCI_MSI_IRQ_DOMAIN select PCIEPORTBUS select PCIE_DW_HOST@@ -145,7 +145,7 @@ config PCIE_ARTPEC6 config PCIE_ARTPEC6_HOST bool "Axis ARTPEC-6 PCIe controller Host Mode" - depends on MACH_ARTPEC6 + depends on MACH_ARTPEC6 || COMPILE_TEST depends on PCI_MSI_IRQ_DOMAIN select PCIEPORTBUS select PCIE_DW_HOST@@ -156,7 +156,7 @@ config PCIE_ARTPEC6_HOST config PCIE_ARTPEC6_EP bool "Axis ARTPEC-6 PCIe controller Endpoint Mode" - depends on MACH_ARTPEC6 + depends on MACH_ARTPEC6 || COMPILE_TEST depends on PCI_ENDPOINT select PCIE_DW_EP select PCIE_ARTPEC6@@ -165,7 +165,7 @@ config PCIE_ARTPEC6_EP endpoint mode. This uses the DesignWare core. config PCIE_KIRIN - depends on OF && ARM64 + depends on OF && (ARM64 || COMPILE_TEST) bool "HiSilicon Kirin series SoCs PCIe controllers" depends on PCI_MSI_IRQ_DOMAIN select PCIEPORTBUS@@ -176,7 +176,7 @@ config PCIE_KIRIN config PCIE_HISI_STB bool "HiSilicon STB SoCs PCIe controllers" - depends on ARCH_HISI + depends on ARCH_HISI || COMPILE_TEST depends on PCI_MSI_IRQ_DOMAIN select PCIEPORTBUS select PCIE_DW_HOSTdrivers/pci/host/Kconfig +14
-17@@ -5,13 +5,13 @@ menu "PCI host controller drivers" config PCI_MVEBU bool "Marvell EBU PCIe controller" - depends on ARCH_MVEBU || ARCH_DOVE + depends on ARCH_MVEBU || ARCH_DOVE || COMPILE_TEST depends on ARM depends on OF config PCI_AARDVARK bool "Aardvark PCIe controller" - depends on ARCH_MVEBU && ARM64 + depends on (ARCH_MVEBU && ARM64) || COMPILE_TEST depends on OF depends on PCI_MSI_IRQ_DOMAIN help@@ -21,7 +21,7 @@ config PCI_AARDVARK config PCIE_XILINX_NWL bool "NWL PCIe Core" - depends on ARCH_ZYNQMP + depends on ARCH_ZYNQMP || COMPILE_TEST depends on PCI_MSI_IRQ_DOMAIN help Say 'Y' here if you want kernel support for Xilinx@@ -32,12 +32,11 @@ config PCIE_XILINX_NWL config PCI_FTPCI100 bool "Faraday Technology FTPCI100 PCI controller" depends on OF - depends on ARM default ARCH_GEMINI config PCI_TEGRA bool "NVIDIA Tegra PCIe controller" - depends on ARCH_TEGRA + depends on ARCH_TEGRA || COMPILE_TEST depends on PCI_MSI_IRQ_DOMAIN help Say Y here if you want support for the PCIe host controller found@@ -45,8 +44,8 @@ config PCI_TEGRA config PCI_RCAR_GEN2 bool "Renesas R-Car Gen2 Internal PCI controller" - depends on ARM depends on ARCH_RENESAS || COMPILE_TEST + depends on ARM help Say Y here if you want internal PCI support on R-Car Gen2 SoC. There are 3 internal PCI controllers available with a single@@ -54,7 +53,7 @@ config PCI_RCAR_GEN2 config PCIE_RCAR bool "Renesas R-Car PCIe controller" - depends on ARCH_RENESAS || (ARM && COMPILE_TEST) + depends on ARCH_RENESAS || COMPILE_TEST depends on PCI_MSI_IRQ_DOMAIN help Say Y here if you want PCIe controller support on R-Car SoCs.@@ -65,7 +64,7 @@ config PCI_HOST_COMMON config PCI_HOST_GENERIC bool "Generic PCI host controller" - depends on (ARM || ARM64) && OF + depends on OF select PCI_HOST_COMMON select IRQ_DOMAIN help@@ -74,14 +73,14 @@ config PCI_HOST_GENERIC config PCIE_XILINX bool "Xilinx AXI PCIe host bridge support" - depends on ARCH_ZYNQ || MICROBLAZE || (MIPS && PCI_DRIVERS_GENERIC) + depends on ARCH_ZYNQ || MICROBLAZE || (MIPS && PCI_DRIVERS_GENERIC) || COMPILE_TEST help Say 'Y' here if you want kernel to support the Xilinx AXI PCIe Host Bridge driver. config PCI_XGENE bool "X-Gene PCIe controller" - depends on ARM64 + depends on ARM64 || COMPILE_TEST depends on OF || (ACPI && PCI_QUIRKS) select PCIEPORTBUS help@@ -101,7 +100,7 @@ config PCI_XGENE_MSI config PCI_V3_SEMI bool "V3 Semiconductor PCI controller" depends on OF - depends on ARM + depends on ARM || COMPILE_TEST default ARCH_INTEGRATOR_AP config PCI_VERSATILE@@ -147,8 +146,7 @@ config PCIE_IPROC_MSI config PCIE_ALTERA bool "Altera PCIe controller" - depends on ARM || NIOS2 - depends on OF_PCI + depends on ARM || NIOS2 || COMPILE_TEST select PCI_DOMAINS help Say Y here if you want to enable PCIe controller support on Altera@@ -164,7 +162,7 @@ config PCIE_ALTERA_MSI config PCI_HOST_THUNDER_PEM bool "Cavium Thunder PCIe controller to off-chip devices" - depends on ARM64 + depends on ARM64 || COMPILE_TEST depends on OF || (ACPI && PCI_QUIRKS) select PCI_HOST_COMMON help@@ -172,7 +170,7 @@ config PCI_HOST_THUNDER_PEM config PCI_HOST_THUNDER_ECAM bool "Cavium Thunder ECAM controller to on-chip devices on pass-1.x silicon" - depends on ARM64 + depends on ARM64 || COMPILE_TEST depends on OF || (ACPI && PCI_QUIRKS) select PCI_HOST_COMMON help@@ -191,9 +189,8 @@ config PCIE_ROCKCHIP config PCIE_MEDIATEK bool "MediaTek PCIe controller" - depends on (ARM || ARM64) && (ARCH_MEDIATEK || COMPILE_TEST) + depends on ARCH_MEDIATEK || COMPILE_TEST depends on OF - depends on PCI select PCIEPORTBUS help Say Y here if you want to enable PCIe controller support on
Quoted 38 lines · Guenter Roeck
Quoted 37 lines · Lorenzo Pieralisi
[+Jan, Ley Foon, RMK]
Quoted 12 lines · Guenter Roeck
Quoted 7 lines · Rob Herring
Add
COMPILE_TESTon driver config options with it. Some ARM drivers still have arch dependencies, so we have to keep those dependent on ARM.Cc Lorenzo Pieralisi <[email protected]>Cc Bjorn Helgaas <[email protected]>Signed-off-by Rob Herring <[email protected]>This patch has the undesirable side effect that it selects
PCI_DOMAINSfor sparc32:allmodconfig, which in turn results inQuoted 7 lines
drivers/ata/pata_ali.c: In function 'ali_init_chipset':drivers/ata/pata_ali.c:469:38: error:
implicit declaration of function 'pci_domain_nr'; did you mean 'pci_iomap_wc'?Unfortunately,
37bd62d224c82("PCI: EnablePCI_DOMAINSalong with generic PCI host controller") has pretty much the same result. No idea how to fix the problem, so I won't even try.Sorry about that.
One option would consist in removing all
PCI_DOMAINSselection fromdrivers/pci/controller/Kconfigand delegate it to arches even though this would forcePCI_DOMAINSselection on all ARM platforms (it is already selected forARCH_MULTIPLATFORM).Or we add back arch dependency to the relevant host bridges.
Everything else I have in mind seems overkill to me given that this patch was added to improve test coverage (we could add a default
pci_domain_nr()stub - weak or #define - that returns 0 in case arches do not provide an implementation but do we really want to do that ?).
Quoted 8 lines
Quoted 2 lines
Thoughts appreciated.
From the definition of
PCI_DOMAINS, I suspect the original idea was that drivers should depend on it, not select it. Especially auto-selecting it withPCI_HOST_GENERICseems like a bad idea to me. However, that is just me. I'll leave it up to Bjorn to decide what if anything he wants to do about it.
Here is a patch that should reinstate the previous behaviour but it will make PCI_DOMAINS a visible option on ARM 32-bit systems; whether that's acceptable that's the question I need to answer, it should honour old configs and it does not force PCI_DOMAINS selection on non-DT arch/arm PCI host controllers (that do not need PCI_DOMAINS anyway so I suspect that enabling it on all ARM 32-bit platforms should not break anything but I preferred to be cautious).
If I hear no complaints I will post it for inclusion, we cannot leave things as they are.
Lorenzo
-- >8 --
arch/arm/Kconfig +7 -1
@@ -1244,8 +1244,14 @@ config PCI VESA. If you have PCI, say Y, otherwise N. config PCI_DOMAINS - bool + bool "Support for multiple PCI domains" depends on PCI + help + Enable PCI domains kernel management. Say Y if your machine + has a PCI bus hierarchy that requires more than one PCI + domain (aka segment) to be correctly managed. Say N otherwise. + + If you don't know what to do here, say N. config PCI_DOMAINS_GENERIC def_bool PCI_DOMAINS
drivers/pci/controller/Kconfig +0 -3
@@ -96,7 +96,6 @@ config PCI_HOST_GENERIC depends on OF select PCI_HOST_COMMON select IRQ_DOMAIN - select PCI_DOMAINS help Say Y here if you want to support a simple generic PCI host controller, such as the one emulated by kvmtool.
@@ -138,7 +137,6 @@ config PCI_VERSATILE config PCIE_IPROC tristate - select PCI_DOMAINS help This enables the iProc PCIe core controller support for Broadcom's iProc family of SoCs. An appropriate bus interface driver needs
@@ -176,7 +174,6 @@ config PCIE_IPROC_MSI config PCIE_ALTERA bool "Altera PCIe controller" depends on ARM || NIOS2 || COMPILE_TEST - select PCI_DOMAINS help Say Y here if you want to enable PCIe controller support on Altera FPGA.
Signature · 1 line
2.15.0
Hi Lorenzo,
Quoted 44 lines · Lorenzo Pieralisi
Quoted 36 lines · Guenter Roeck
Quoted 35 lines · Lorenzo Pieralisi
[+Jan, Ley Foon, RMK]
Quoted 11 lines · Guenter Roeck
Quoted 7 lines · Rob Herring
Add
COMPILE_TESTon driver config options with it. Some ARM drivers still have arch dependencies, so we have to keep those dependent on ARM.Cc Lorenzo Pieralisi <[email protected]>Cc Bjorn Helgaas <[email protected]>Signed-off-by Rob Herring <[email protected]>This patch has the undesirable side effect that it selects
PCI_DOMAINSfor sparc32:allmodconfig, which in turn results inQuoted 7 lines
drivers/ata/pata_ali.c: In function 'ali_init_chipset':drivers/ata/pata_ali.c:469:38: error:
implicit declaration of function 'pci_domain_nr'; did you mean 'pci_iomap_wc'?Unfortunately,
37bd62d224c82("PCI: EnablePCI_DOMAINSalong with generic PCI host controller") has pretty much the same result. No idea how to fix the problem, so I won't even try.Sorry about that.
One option would consist in removing all
PCI_DOMAINSselection fromdrivers/pci/controller/Kconfigand delegate it to arches even though this would forcePCI_DOMAINSselection on all ARM platforms (it is already selected forARCH_MULTIPLATFORM).Or we add back arch dependency to the relevant host bridges.
Everything else I have in mind seems overkill to me given that this patch was added to improve test coverage (we could add a default
pci_domain_nr()stub - weak or #define - that returns 0 in case arches do not provide an implementation but do we really want to do that ?).Quoted 7 lines
Quoted 2 lines
Thoughts appreciated.
From the definition of
PCI_DOMAINS, I suspect the original idea was that
drivers should depend on it, not select it. Especially auto-selecting it withPCI_HOST_GENERICseems like a bad idea to me. However, that is just me. I'll leave it up to Bjorn to decide what if anything he wants to do about it.
Quoted 7 lines
Here is a patch that should reinstate the previous behaviour but it will make
PCI_DOMAINSa visible option on ARM 32-bit systems; whether that's acceptable that's the question I need to answer, it should honour old configs and it does not forcePCI_DOMAINSselection on non-DTarch/armPCI host controllers (that do not needPCI_DOMAINSanyway so I suspect that enabling it on all ARM 32-bit platforms should not break anything but I preferred to be cautious).
I think this change will also require a patch enabling CONFIG_PCI_DOMAINS in multi_v7_defconfig and iproc_defconfig at the very least?
Quoted 55 lines
If I hear no complaints I will post it for inclusion, we cannot leave things as they are.
Lorenzo
-- >8 --
arch/arm/Kconfig +7
-1@@ -1244,8 +1244,14 @@ config PCI VESA. If you have PCI, say Y, otherwise N. config PCI_DOMAINS - bool + bool "Support for multiple PCI domains" depends on PCI + help + Enable PCI domains kernel management. Say Y if your machine + has a PCI bus hierarchy that requires more than one PCI + domain (aka segment) to be correctly managed. Say N otherwise. + + If you don't know what to do here, say N. config PCI_DOMAINS_GENERIC def_bool PCI_DOMAINSdrivers/pci/controller/Kconfig +0
-3@@ -96,7 +96,6 @@ config PCI_HOST_GENERIC depends on OF select PCI_HOST_COMMON select IRQ_DOMAIN - select PCI_DOMAINS help Say Y here if you want to support a simple generic PCI host controller, such as the one emulated by kvmtool.@@ -138,7 +137,6 @@ config PCI_VERSATILE config PCIE_IPROC tristate - select PCI_DOMAINS help This enables the iProc PCIe core controller support for Broadcom's iProc family of SoCs. An appropriate bus interface driver needs@@ -176,7 +174,6 @@ config PCIE_IPROC_MSI config PCIE_ALTERA bool "Altera PCIe controller" depends on ARM || NIOS2 || COMPILE_TEST - select PCI_DOMAINS help Say Y here if you want to enable PCIe controller support on Altera FPGA.
Quoted 48 lines · Scott Branden
Hi Lorenzo,
Quoted 44 lines · Lorenzo Pieralisi
Quoted 43 lines · Guenter Roeck
Quoted 28 lines · Lorenzo Pieralisi
[+Jan, Ley Foon, RMK]
Quoted 11 lines · Guenter Roeck
Quoted 7 lines · Rob Herring
Add
COMPILE_TESTon driver config options with it. Some ARM drivers still have arch dependencies, so we have to keep those dependent on ARM.Cc Lorenzo Pieralisi <[email protected]>Cc Bjorn Helgaas <[email protected]>Signed-off-by Rob Herring <[email protected]>This patch has the undesirable side effect that it selects
PCI_DOMAINSfor sparc32:allmodconfig, which in turn results inQuoted 7 lines
drivers/ata/pata_ali.c: In function 'ali_init_chipset':drivers/ata/pata_ali.c:469:38: error:
implicit declaration of function 'pci_domain_nr'; did you mean 'pci_iomap_wc'?Unfortunately,
37bd62d224c82("PCI: EnablePCI_DOMAINSalong with generic PCI host controller") has pretty much the same result. No idea how to fix the problem, so I won't even try.Sorry about that.
One option would consist in removing all
PCI_DOMAINSselection fromdrivers/pci/controller/Kconfigand delegate it to arches even though this would forcePCI_DOMAINSselection on all ARM platforms (it is already selected forARCH_MULTIPLATFORM).Quoted 9 lines
Or we add back arch dependency to the relevant host bridges.
Everything else I have in mind seems overkill to me given that this patch was added to improve test coverage (we could add a default
pci_domain_nr()stub - weak or #define - that returns 0 in case arches do not provide an implementation but do we really want to do that ?).Thoughts appreciated.
From the definition of
PCI_DOMAINS, I suspect the original idea was that drivers should depend on it, not select it. Especially auto-selecting it withPCI_HOST_GENERICseems like a bad idea to me. However, that is just me. I'll leave it up to Bjorn to decide what if anything he wants to do about it.
Quoted 8 lines
Quoted 7 lines
Here is a patch that should reinstate the previous behaviour but it will make
PCI_DOMAINSa visible option on ARM 32-bit systems; whether that's acceptable that's the question I need to answer, it should honour old configs and it does not forcePCI_DOMAINSselection on non-DTarch/armPCI host controllers (that do not needPCI_DOMAINSanyway so I suspect that enabling it on all ARM 32-bit platforms should not break anything but I preferred to be cautious).I think this change will also require a patch enabling
CONFIG_PCI_DOMAINSinmulti_v7_defconfigandiproc_defconfigat the very least?
as well as arm64/configs/defconfig? Rather than having to change all the defconfigs perhaps can to make default y in Kconfig for architectures that should have it as such?
Quoted 54 lines
Quoted 53 lines
If I hear no complaints I will post it for inclusion, we cannot leave things as they are.
Lorenzo
-- >8 --
arch/arm/Kconfig +0
-0@@ -1244,8 +1244,14 @@ config PCIVESA. If you have PCI, say Y, otherwise N.
configPCI_DOMAINS
- bool
+ bool "Support for multiple PCI domains"
depends on PCI
+ help
+ Enable PCI domains kernel management. Say Y if your machine + has a PCI bus hierarchy that requires more than one PCI + domain (aka segment) to be correctly managed. Say N otherwise. +
+ If you don't know what to do here, say N.
configPCI_DOMAINS_GENERIC
def_boolPCI_DOMAINSdrivers/pci/controller/Kconfig +0
-0@@ -96,7 +96,6 @@ config PCI_HOST_GENERICdepends on OF
selectPCI_HOST_COMMON
selectIRQ_DOMAIN
- selectPCI_DOMAINS
help
Say Y here if you want to support a simple generic PCI host controller, such as the one emulated by kvmtool.drivers/pci/controller/Kconfig +0
-0@@ -138,7 +137,6 @@ config PCI_VERSATILEconfig
PCIE_IPROC
tristate
- selectPCI_DOMAINS
help
This enables the iProc PCIe core controller support for Broadcom's iProc family of SoCs. An appropriate bus interface driver needsdrivers/pci/controller/Kconfig +0
-0@@ -176,7 +174,6 @@ config PCIE_IPROC_MSIconfig
PCIE_ALTERA
bool "Altera PCIe controller"
depends on ARM || NIOS2 ||COMPILE_TEST
- selectPCI_DOMAINS
help
Say Y here if you want to enable PCIe controller support on Altera FPGA.
Quoted 64 lines · Scott Branden
Quoted 61 lines · Scott Branden
Hi Lorenzo,
Quoted 57 lines · Lorenzo Pieralisi
Quoted 41 lines · Guenter Roeck
Quoted 40 lines · Lorenzo Pieralisi
[+Jan, Ley Foon, RMK]
Quoted 18 lines · Guenter Roeck
Quoted 8 lines · Rob Herring
Add
COMPILE_TESTon driver config options with it. Some ARM drivers still have arch dependencies, so we have to keep those dependent on ARM.Cc Lorenzo Pieralisi <[email protected]>Cc Bjorn Helgaas <[email protected]>Signed-off-by Rob Herring <[email protected]>This patch has the undesirable side effect that it selects
PCI_DOMAINSfor
sparc32:allmodconfig, which in turn results in
drivers/ata/pata_ali.c: In function 'ali_init_chipset':drivers/ata/pata_ali.c:469:38: error:
implicit declaration of function 'pci_domain_nr'; did you mean 'pci_iomap_wc'?Quoted 5 lines
Unfortunately,
37bd62d224c82("PCI: EnablePCI_DOMAINSalong with generic
PCI host controller") has pretty much the same result. No idea how to fix
the problem, so I won't even try.Sorry about that.
One option would consist in removing all
PCI_DOMAINSselection fromdrivers/pci/controller/Kconfigand delegate it to arches even though this would forcePCI_DOMAINSselection on all ARM platforms (it is already selected forARCH_MULTIPLATFORM).Or we add back arch dependency to the relevant host bridges.
Everything else I have in mind seems overkill to me given that this patch was added to improve test coverage (we could add a default
pci_domain_nr()stub - weak or #define - that returns 0 in case arches do not provide an implementation but do we really want to do that ?).Quoted 8 lines
Quoted 2 lines
Thoughts appreciated.
From the definition of
PCI_DOMAINS, I suspect the original idea was that
drivers should depend on it, not select it. Especially auto-selecting it withPCI_HOST_GENERICseems like a bad idea to me. However, that is just me. I'll leave it up to Bjorn to decide what if anything he wants to do about it.Here is a patch that should reinstate the previous behaviour but it will make
PCI_DOMAINSa visible option on ARM 32-bit systems; whether that's acceptable that's the question I need to answer, it should honour old configs and it does not forcePCI_DOMAINSselection on non-DTarch/armPCI host controllers (that do not needPCI_DOMAINSanyway so I suspect that enabling it on all ARM 32-bit platforms should not break anything but I preferred to be cautious).
Quoted 6 lines
Quoted 3 lines
I think this change will also require a patch enabling
CONFIG_PCI_DOMAINSinmulti_v7_defconfigandiproc_defconfigat the very least?as well as arm64/configs/defconfig? Rather than having to change all the defconfigs perhaps can to make default y in
Kconfigfor architectures that should have it as such?
I can't do that on ARM, this would force PCI_DOMAINS on platforms that never relied on it and that can trigger regressions.
It is unfortunate but the safest option consists in selecting PCI_DOMAINS in the respective ARCH_* options I think.
Lorenzo
Rob Herring
reviewerQuoted 70 lines · Scott Branden
Hi Lorenzo,
Quoted 57 lines · Lorenzo Pieralisi
Quoted 47 lines · Guenter Roeck
Quoted 45 lines · Lorenzo Pieralisi
[+Jan, Ley Foon, RMK]
Quoted 21 lines · Guenter Roeck
Quoted 9 lines · Rob Herring
Add
COMPILE_TESTon driver config options with it. Some ARM drivers still have arch dependencies, so we have to keep those dependent on ARM.Cc Lorenzo Pieralisi <[email protected]>Cc Bjorn Helgaas <[email protected]>Signed-off-by Rob Herring <[email protected]>This patch has the undesirable side effect that it selects
PCI_DOMAINSfor
sparc32:allmodconfig, which in turn results in
drivers/ata/pata_ali.c: In function 'ali_init_chipset':drivers/ata/pata_ali.c:469:38: error:
implicit declaration of function 'pci_domain_nr'; did you mean
'pci_iomap_wc'?Quoted 5 lines
Unfortunately,
37bd62d224c82("PCI: EnablePCI_DOMAINSalong with generic
PCI host controller") has pretty much the same result. No idea how to fix
the problem, so I won't even try.Sorry about that.
One option would consist in removing all
PCI_DOMAINSselection fromdrivers/pci/controller/Kconfigand delegate it to arches even though this would forcePCI_DOMAINSselection on all ARM platforms (it is already selected forARCH_MULTIPLATFORM).Or we add back arch dependency to the relevant host bridges.
Everything else I have in mind seems overkill to me given that this patch was added to improve test coverage (we could add a default
pci_domain_nr()stub - weak or #define - that returns 0 in case arches do not provide an implementation but do we really want to do that ?).Quoted 7 lines
Quoted 2 lines
Thoughts appreciated.
From the definition of
PCI_DOMAINS, I suspect the original idea was that
drivers should depend on it, not select it. Especially auto-selecting it withPCI_HOST_GENERICseems like a bad idea to me. However, that is just me. I'll leave it up to Bjorn to decide what if anything he wants to do about it.Quoted 7 lines
Here is a patch that should reinstate the previous behaviour but it will make
PCI_DOMAINSa visible option on ARM 32-bit systems; whether that's acceptable that's the question I need to answer, it should honour old configs and it does not forcePCI_DOMAINSselection on non-DTarch/armPCI host controllers (that do not needPCI_DOMAINSanyway so I suspect that enabling it on all ARM 32-bit platforms should not break anything but I preferred to be cautious).
Quoted 2 lines
I think this change will also require a patch enabling
CONFIG_PCI_DOMAINSinmulti_v7_defconfigandiproc_defconfigat the very least?
Perhaps the sub-arches that want this should select it. It is more a platform option/decision more than a controller option.
Rob
Quoted 72 lines · Rob Herring
Quoted 70 lines · Scott Branden
Hi Lorenzo,
Quoted 64 lines · Lorenzo Pieralisi
Quoted 47 lines · Guenter Roeck
Quoted 45 lines · Lorenzo Pieralisi
[+Jan, Ley Foon, RMK]
Quoted 21 lines · Guenter Roeck
Quoted 9 lines · Rob Herring
Add
COMPILE_TESTon driver config options with it. Some ARM drivers still have arch dependencies, so we have to keep those dependent on ARM.Cc Lorenzo Pieralisi <[email protected]>Cc Bjorn Helgaas <[email protected]>Signed-off-by Rob Herring <[email protected]>This patch has the undesirable side effect that it selects
PCI_DOMAINSfor
sparc32:allmodconfig, which in turn results in
drivers/ata/pata_ali.c: In function 'ali_init_chipset':drivers/ata/pata_ali.c:469:38: error:
implicit declaration of function 'pci_domain_nr'; did you mean
'pci_iomap_wc'?Quoted 5 lines
Unfortunately,
37bd62d224c82("PCI: EnablePCI_DOMAINSalong with generic
PCI host controller") has pretty much the same result. No idea how to fix
the problem, so I won't even try.Sorry about that.
One option would consist in removing all
PCI_DOMAINSselection fromdrivers/pci/controller/Kconfigand delegate it to arches even though this would forcePCI_DOMAINSselection on all ARM platforms (it is already selected forARCH_MULTIPLATFORM).Or we add back arch dependency to the relevant host bridges.
Everything else I have in mind seems overkill to me given that this patch was added to improve test coverage (we could add a default
pci_domain_nr()stub - weak or #define - that returns 0 in case arches do not provide an implementation but do we really want to do that ?).Quoted 7 lines
Quoted 2 lines
Thoughts appreciated.
From the definition of
PCI_DOMAINS, I suspect the original idea was that
drivers should depend on it, not select it. Especially auto-selecting it withPCI_HOST_GENERICseems like a bad idea to me. However, that is just me. I'll leave it up to Bjorn to decide what if anything he wants to do about it.Here is a patch that should reinstate the previous behaviour but it will make
PCI_DOMAINSa visible option on ARM 32-bit systems; whether that's acceptable that's the question I need to answer, it should honour old configs and it does not forcePCI_DOMAINSselection on non-DTarch/armPCI host controllers (that do not needPCI_DOMAINSanyway so I suspect that enabling it on all ARM 32-bit platforms should not break anything but I preferred to be cautious).
Quoted 5 lines
Quoted 2 lines
I think this change will also require a patch enabling
CONFIG_PCI_DOMAINSinmulti_v7_defconfigandiproc_defconfigat the very least?Perhaps the sub-arches that want this should select it. It is more a platform option/decision more than a controller option.
Yes, that makes sense, I assume ARCH_VIRT is a sensible choice for virtual machines configuration, Jan ?
I will add a PCI_DOMAINS selection to all (ARM) arches that select PCI_DOMAINS in drivers/pci/controller/Kconfig.
For Jailhouse configurations I need Jan's input, I assume adding the selection to ARCH_VIRT is the correct way forward, please let me know asap.
Lorenzo
Quoted 82 lines · Lorenzo Pieralisi
Quoted 72 lines · Rob Herring
Quoted 70 lines · Scott Branden
Hi Lorenzo,
Quoted 64 lines · Lorenzo Pieralisi
Quoted 47 lines · Guenter Roeck
Quoted 45 lines · Lorenzo Pieralisi
[+Jan, Ley Foon, RMK]
Quoted 21 lines · Guenter Roeck
Quoted 9 lines · Rob Herring
Add
COMPILE_TESTon driver config options with it. Some ARM drivers still have arch dependencies, so we have to keep those dependent on ARM.Cc Lorenzo Pieralisi <[email protected]>Cc Bjorn Helgaas <[email protected]>Signed-off-by Rob Herring <[email protected]>This patch has the undesirable side effect that it selects
PCI_DOMAINSfor
sparc32:allmodconfig, which in turn results in
drivers/ata/pata_ali.c: In function 'ali_init_chipset':drivers/ata/pata_ali.c:469:38: error:
implicit declaration of function 'pci_domain_nr'; did you mean
'pci_iomap_wc'?Quoted 5 lines
Unfortunately,
37bd62d224c82("PCI: EnablePCI_DOMAINSalong with generic
PCI host controller") has pretty much the same result. No idea how to fix
the problem, so I won't even try.Sorry about that.
One option would consist in removing all
PCI_DOMAINSselection fromdrivers/pci/controller/Kconfigand delegate it to arches even though this would forcePCI_DOMAINSselection on all ARM platforms (it is already selected forARCH_MULTIPLATFORM).Or we add back arch dependency to the relevant host bridges.
Everything else I have in mind seems overkill to me given that this patch was added to improve test coverage (we could add a default
pci_domain_nr()stub - weak or #define - that returns 0 in case arches do not provide an implementation but do we really want to do that ?).Quoted 7 lines
Quoted 2 lines
Thoughts appreciated.
From the definition of
PCI_DOMAINS, I suspect the original idea was that
drivers should depend on it, not select it. Especially auto-selecting it withPCI_HOST_GENERICseems like a bad idea to me. However, that is just me. I'll leave it up to Bjorn to decide what if anything he wants to do about it.Here is a patch that should reinstate the previous behaviour but it will make
PCI_DOMAINSa visible option on ARM 32-bit systems; whether that's acceptable that's the question I need to answer, it should honour old configs and it does not forcePCI_DOMAINSselection on non-DTarch/armPCI host controllers (that do not needPCI_DOMAINSanyway so I suspect that enabling it on all ARM 32-bit platforms should not break anything but I preferred to be cautious).Quoted 5 lines
Quoted 2 lines
I think this change will also require a patch enabling
CONFIG_PCI_DOMAINSinmulti_v7_defconfigandiproc_defconfigat the very least?Perhaps the sub-arches that want this should select it. It is more a platform option/decision more than a controller option.
Yes, that makes sense, I assume
ARCH_VIRTis a sensible choice for virtual machines configuration, Jan ?
Quoted 6 lines
I will add a
PCI_DOMAINSselection to all (ARM) arches that selectPCI_DOMAINSindrivers/pci/controller/Kconfig.For Jailhouse configurations I need Jan's input, I assume adding the selection to
ARCH_VIRTis the correct way forward, please let me know asap.
So far, there is no need on ARM or ARM64 declare a special platform in order to run as Jailhouse (secondary) guest.
My original patch was just about making PCI_DOMAINS manually configurable, which would have been fine for our use case.
Jan
Signature · 2 lines
Siemens AG, Corporate Technology, CT RDA IOT SES-DE Corporate Competence Center Embedded Linux
Quoted 90 lines · Jan Kiszka
Quoted 82 lines · Lorenzo Pieralisi
Quoted 72 lines · Rob Herring
Quoted 70 lines · Scott Branden
Hi Lorenzo,
Quoted 64 lines · Lorenzo Pieralisi
Quoted 47 lines · Guenter Roeck
Quoted 45 lines · Lorenzo Pieralisi
[+Jan, Ley Foon, RMK]
Quoted 21 lines · Guenter Roeck
Quoted 9 lines · Rob Herring
Add
COMPILE_TESTon driver config options with it. Some ARM drivers still have arch dependencies, so we have to keep those dependent on ARM.Cc Lorenzo Pieralisi <[email protected]>Cc Bjorn Helgaas <[email protected]>Signed-off-by Rob Herring <[email protected]>This patch has the undesirable side effect that it selects
PCI_DOMAINSfor
sparc32:allmodconfig, which in turn results in
drivers/ata/pata_ali.c: In function 'ali_init_chipset':drivers/ata/pata_ali.c:469:38: error:
implicit declaration of function 'pci_domain_nr'; did you mean
'pci_iomap_wc'?Quoted 5 lines
Unfortunately,
37bd62d224c82("PCI: EnablePCI_DOMAINSalong with generic
PCI host controller") has pretty much the same result. No idea how to fix
the problem, so I won't even try.Sorry about that.
One option would consist in removing all
PCI_DOMAINSselection fromdrivers/pci/controller/Kconfigand delegate it to arches even though this would forcePCI_DOMAINSselection on all ARM platforms (it is already selected forARCH_MULTIPLATFORM).Or we add back arch dependency to the relevant host bridges.
Everything else I have in mind seems overkill to me given that this patch was added to improve test coverage (we could add a default
pci_domain_nr()stub - weak or #define - that returns 0 in case arches do not provide an implementation but do we really want to do that ?).Quoted 7 lines
Quoted 2 lines
Thoughts appreciated.
From the definition of
PCI_DOMAINS, I suspect the original idea was that
drivers should depend on it, not select it. Especially auto-selecting it withPCI_HOST_GENERICseems like a bad idea to me. However, that is just me. I'll leave it up to Bjorn to decide what if anything he wants to do about it.Here is a patch that should reinstate the previous behaviour but it will make
PCI_DOMAINSa visible option on ARM 32-bit systems; whether that's acceptable that's the question I need to answer, it should honour old configs and it does not forcePCI_DOMAINSselection on non-DTarch/armPCI host controllers (that do not needPCI_DOMAINSanyway so I suspect that enabling it on all ARM 32-bit platforms should not break anything but I preferred to be cautious).Quoted 5 lines
Quoted 2 lines
I think this change will also require a patch enabling
CONFIG_PCI_DOMAINSinmulti_v7_defconfigandiproc_defconfigat the very least?Perhaps the sub-arches that want this should select it. It is more a platform option/decision more than a controller option.
Yes, that makes sense, I assume
ARCH_VIRTis a sensible choice for virtual machines configuration, Jan ?Quoted 6 lines
I will add a
PCI_DOMAINSselection to all (ARM) arches that selectPCI_DOMAINSindrivers/pci/controller/Kconfig.For Jailhouse configurations I need Jan's input, I assume adding the selection to
ARCH_VIRTis the correct way forward, please let me know asap.
Quoted 5 lines
So far, there is no need on ARM or ARM64 declare a special platform in order to run as Jailhouse (secondary) guest.
My original patch was just about making
PCI_DOMAINSmanually configurable, which would have been fine for our use case.
I need more details on your system configuration to make sure we can fix this in a way that does not upset anybody; I am not a big fan of making PCI_DOMAINS visible since it affects other platforms and it is different from how it is managed for all other arches, so please provide details.
Thanks,
Lorenzo
Quoted 94 lines · Lorenzo Pieralisi
Quoted 93 lines · Jan Kiszka
Quoted 82 lines · Lorenzo Pieralisi
Quoted 72 lines · Rob Herring
Quoted 70 lines · Scott Branden
Hi Lorenzo,
Quoted 64 lines · Lorenzo Pieralisi
Quoted 47 lines · Guenter Roeck
Quoted 45 lines · Lorenzo Pieralisi
[+Jan, Ley Foon, RMK]
Quoted 21 lines · Guenter Roeck
Quoted 9 lines · Rob Herring
Add
COMPILE_TESTon driver config options with it. Some ARM drivers still have arch dependencies, so we have to keep those dependent on ARM.Cc Lorenzo Pieralisi <[email protected]>Cc Bjorn Helgaas <[email protected]>Signed-off-by Rob Herring <[email protected]>This patch has the undesirable side effect that it selects
PCI_DOMAINSfor
sparc32:allmodconfig, which in turn results in
drivers/ata/pata_ali.c: In function 'ali_init_chipset':drivers/ata/pata_ali.c:469:38: error:
implicit declaration of function 'pci_domain_nr'; did you mean
'pci_iomap_wc'?Quoted 5 lines
Unfortunately,
37bd62d224c82("PCI: EnablePCI_DOMAINSalong with generic
PCI host controller") has pretty much the same result. No idea how to fix
the problem, so I won't even try.Sorry about that.
One option would consist in removing all
PCI_DOMAINSselection fromdrivers/pci/controller/Kconfigand delegate it to arches even though this would forcePCI_DOMAINSselection on all ARM platforms (it is already selected forARCH_MULTIPLATFORM).Or we add back arch dependency to the relevant host bridges.
Everything else I have in mind seems overkill to me given that this patch was added to improve test coverage (we could add a default
pci_domain_nr()stub - weak or #define - that returns 0 in case arches do not provide an implementation but do we really want to do that ?).Quoted 7 lines
Quoted 2 lines
Thoughts appreciated.
From the definition of
PCI_DOMAINS, I suspect the original idea was that
drivers should depend on it, not select it. Especially auto-selecting it withPCI_HOST_GENERICseems like a bad idea to me. However, that is just me. I'll leave it up to Bjorn to decide what if anything he wants to do about it.Here is a patch that should reinstate the previous behaviour but it will make
PCI_DOMAINSa visible option on ARM 32-bit systems; whether that's acceptable that's the question I need to answer, it should honour old configs and it does not forcePCI_DOMAINSselection on non-DTarch/armPCI host controllers (that do not needPCI_DOMAINSanyway so I suspect that enabling it on all ARM 32-bit platforms should not break anything but I preferred to be cautious).Quoted 5 lines
Quoted 2 lines
I think this change will also require a patch enabling
CONFIG_PCI_DOMAINSinmulti_v7_defconfigandiproc_defconfigat the very least?Perhaps the sub-arches that want this should select it. It is more a platform option/decision more than a controller option.
Yes, that makes sense, I assume
ARCH_VIRTis a sensible choice for virtual machines configuration, Jan ?Quoted 6 lines
I will add a
PCI_DOMAINSselection to all (ARM) arches that selectPCI_DOMAINSindrivers/pci/controller/Kconfig.For Jailhouse configurations I need Jan's input, I assume adding the selection to
ARCH_VIRTis the correct way forward, please let me know asap.So far, there is no need on ARM or ARM64 declare a special platform in order to run as Jailhouse (secondary) guest.
Quoted 7 lines
Quoted 2 lines
My original patch was just about making
PCI_DOMAINSmanually configurable, which would have been fine for our use case.I need more details on your system configuration to make sure we can fix this in a way that does not upset anybody; I am not a big fan of making
PCI_DOMAINSvisible since it affects other platforms and it is different from how it is managed for all other arches, so please provide details.
Our setup is as follows: A platform, e.g. Jetson TK1 or TX1/2, already has one PCI host controller. When enabling Jailhouse on it (from within a running Linux), this adds the generic PCI host controller as virtual one. So we need to configure the system to support both controllers and PCI domains. But, otherwise, the system does not look different from a physical one.
Jan
Signature · 2 lines
Siemens AG, Corporate Technology, CT RDA IOT SES-DE Corporate Competence Center Embedded Linux
Quoted 103 lines · Jan Kiszka
Quoted 94 lines · Lorenzo Pieralisi
Quoted 93 lines · Jan Kiszka
Quoted 82 lines · Lorenzo Pieralisi
Quoted 72 lines · Rob Herring
Quoted 70 lines · Scott Branden
Hi Lorenzo,
Quoted 64 lines · Lorenzo Pieralisi
Quoted 47 lines · Guenter Roeck
Quoted 45 lines · Lorenzo Pieralisi
[+Jan, Ley Foon, RMK]
Quoted 21 lines · Guenter Roeck
Quoted 9 lines · Rob Herring
Add
COMPILE_TESTon driver config options with it. Some ARM drivers still have arch dependencies, so we have to keep those dependent on ARM.Cc Lorenzo Pieralisi <[email protected]>Cc Bjorn Helgaas <[email protected]>Signed-off-by Rob Herring <[email protected]>This patch has the undesirable side effect that it selects
PCI_DOMAINSfor
sparc32:allmodconfig, which in turn results in
drivers/ata/pata_ali.c: In function 'ali_init_chipset':drivers/ata/pata_ali.c:469:38: error:
implicit declaration of function 'pci_domain_nr'; did you mean
'pci_iomap_wc'?Quoted 5 lines
Unfortunately,
37bd62d224c82("PCI: EnablePCI_DOMAINSalong with generic
PCI host controller") has pretty much the same result. No idea how to fix
the problem, so I won't even try.Sorry about that.
One option would consist in removing all
PCI_DOMAINSselection fromdrivers/pci/controller/Kconfigand delegate it to arches even though this would forcePCI_DOMAINSselection on all ARM platforms (it is already selected forARCH_MULTIPLATFORM).Or we add back arch dependency to the relevant host bridges.
Everything else I have in mind seems overkill to me given that this patch was added to improve test coverage (we could add a default
pci_domain_nr()stub - weak or #define - that returns 0 in case arches do not provide an implementation but do we really want to do that ?).Quoted 7 lines
Quoted 2 lines
Thoughts appreciated.
From the definition of
PCI_DOMAINS, I suspect the original idea was that
drivers should depend on it, not select it. Especially auto-selecting it withPCI_HOST_GENERICseems like a bad idea to me. However, that is just me. I'll leave it up to Bjorn to decide what if anything he wants to do about it.Here is a patch that should reinstate the previous behaviour but it will make
PCI_DOMAINSa visible option on ARM 32-bit systems; whether that's acceptable that's the question I need to answer, it should honour old configs and it does not forcePCI_DOMAINSselection on non-DTarch/armPCI host controllers (that do not needPCI_DOMAINSanyway so I suspect that enabling it on all ARM 32-bit platforms should not break anything but I preferred to be cautious).Quoted 5 lines
Quoted 2 lines
I think this change will also require a patch enabling
CONFIG_PCI_DOMAINSinmulti_v7_defconfigandiproc_defconfigat the very least?Perhaps the sub-arches that want this should select it. It is more a platform option/decision more than a controller option.
Yes, that makes sense, I assume
ARCH_VIRTis a sensible choice for virtual machines configuration, Jan ?Quoted 6 lines
I will add a
PCI_DOMAINSselection to all (ARM) arches that selectPCI_DOMAINSindrivers/pci/controller/Kconfig.For Jailhouse configurations I need Jan's input, I assume adding the selection to
ARCH_VIRTis the correct way forward, please let me know asap.So far, there is no need on ARM or ARM64 declare a special platform in order to run as Jailhouse (secondary) guest.
Quoted 7 lines
Quoted 2 lines
My original patch was just about making
PCI_DOMAINSmanually configurable, which would have been fine for our use case.I need more details on your system configuration to make sure we can fix this in a way that does not upset anybody; I am not a big fan of making
PCI_DOMAINSvisible since it affects other platforms and it is different from how it is managed for all other arches, so please provide details.
Quoted 6 lines
Our setup is as follows: A platform, e.g. Jetson TK1 or TX1/2, already has one PCI host controller. When enabling Jailhouse on it (from within a running Linux), this adds the generic PCI host controller as virtual one. So we need to configure the system to support both controllers and PCI domains. But, otherwise, the system does not look different from a physical one.
Well, it looks like the only sensible way forward is to amend the patch below and make PCI_DOMAINS a visible option on ARM and still select it from the sub-arch entries that need it:
https://marc.info/?l=linux-pci&m=152932092612352&w=2
If there are other ideas I am happy to hear them.
Lorenzo