board: amarula: Add A64-Relic support
PATCH v3 1/2 board: amarula: Add A64-Relic support
Add initial support for Amarula A64-Relic board
with below features:
- U-Boot 2018.07-rc1
- Linux 4.17.0-rc6
- Default packages from buildroot
---
Changes for v3:
- Use 4.17 kernel headers
- Add wiki link
- Add BR2_PACKAGE_HOST_ANDROID_TOOLS_FASTBOOT
- Update comments on readme.txt suggested by Thomas Changes for v2:
- Use mainline U-Boot
- Drop uboot.fragment since the UMS used for developement, so note it on readme.txt how to use.
- format the 'Write eMMC' steps suggested by Arnout.
- fix fastboot steps in readme.txt
- add offset in genimage.cfg for boot partition instead of size
.gitlab-ci.yml | 1 + DEVELOPERS | 1 + board/amarula/a64-relic/extlinux.conf | 4 ++ board/amarula/a64-relic/genimage.cfg | 39 +++++++++++++++++ board/amarula/a64-relic/post-build.sh | 4 ++ board/amarula/a64-relic/readme.txt | 81 +++++++++++++++++++++++++++++++++++ configs/amarula_a64_relic_defconfig | 47 ++++++++++++++++++++ 7 files changed, 177 insertions(+) create mode 100644 board/amarula/a64-relic/extlinux.conf create mode 100644 board/amarula/a64-relic/genimage.cfg create mode 100755 board/amarula/a64-relic/post-build.sh create mode 100644 board/amarula/a64-relic/readme.txt create mode 100644 configs/amarula_a64_relic_defconfig
.gitlab-ci.yml +1 -0
@@ -79,6 +79,7 @@ acmesystems_aria_g25_128mb_defconfig: *defconfig acmesystems_aria_g25_256mb_defconfig: *defconfig acmesystems_arietta_g25_128mb_defconfig: *defconfig acmesystems_arietta_g25_256mb_defconfig: *defconfig +amarula_a64_relic_defconfig: *defconfig amarula_vyasa_rk3288_defconfig: *defconfig arcturus_ucls1012a_defconfig: *defconfig arcturus_ucp1020_defconfig: *defconfig
DEVELOPERS +1 -0
@@ -893,6 +893,7 @@ F: board/amarula/ F: board/asus/ F: board/bananapi/ F: board/engicam/ +F: configs/amarula_a64_relic_defconfig F: configs/amarula_vyasa_rk3288_defconfig F: configs/asus_tinker_rk3288_defconfig F: board/friendlyarm/nanopi-a64/
board/amarula/a64-relic/extlinux.conf new file +4 -0
@@ -0,0 +1,4 @@ +label linux-4.17.0-rc3 + kernel /Image + devicetree /sun50i-a64-amarula-relic.dtb + append console=ttyS0,115200 earlyprintk root=/dev/mmcblk1p4 rootwait
board/amarula/a64-relic/genimage.cfg new file +39 -0
@@ -0,0 +1,39 @@ +image boot.vfat { + vfat { + files = { + "Image", + "sun50i-a64-amarula-relic.dtb", + "extlinux" + } + } + size = 64M +} + +image sdcard.img { + hdimage { + } + + partition spl { + in-partition-table = "no" + image = "sunxi-spl.bin" + offset = 8192 + } + + partition u-boot { + in-partition-table = "no" + image = "u-boot.itb" + offset = 40K + } + + partition boot { + partition-type = 0xC + bootable = "true" + image = "boot.vfat" + offset = 1M + } + + partition rootfs { + partition-type = 0x83 + image = "rootfs.ext4" + } +}
board/amarula/a64-relic/post-build.sh new file +4 -0
@@ -0,0 +1,4 @@ +#!/bin/sh +BOARD_DIR="$(dirname $0)" + +install -m 0644 -D $BOARD_DIR/extlinux.conf $BINARIES_DIR/extlinux/extlinux.conf
board/amarula/a64-relic/readme.txt new file +81 -0
81 lines not on this page · raw message
configs/amarula_a64_relic_defconfig new file +47 -0
47 lines not on this page · raw message
Signature · 1 line
2.14.3
PATCH v3 2/2 board: amarula: a64-relic: Add WiFi support
Amarula A64-Relic board has AP6330 WiFi/BT combo, but does not have ethernet port. So it makes sense to enable wireless networking by default:
- add broadcom wireless firmware package to image
- add basic wireless tools to image
- add rootfs overlay with proper NVRAM file for on-board AP6330 chip
- add mdev to image to enable module autoloading
- update readme.txt to test wifi
---
Changes for v3:
- none
Changes for v2:
- drop init scripts for module loading
- add mdev for module autoloading
board/amarula/a64-relic/readme.txt | 9 +++ .../lib/firmware/brcm/brcmfmac4330-sdio.txt | 83 ++++++++++++++++++++++ configs/amarula_a64_relic_defconfig | 13 ++++ 3 files changed, 105 insertions(+) create mode 100644 board/amarula/a64-relic/rootfs_overlay/lib/firmware/brcm/brcmfmac4330-sdio.txt
board/amarula/a64-relic/readme.txt +9 -0
@@ -76,6 +76,15 @@ capability of U-Boot. To achieve this: => mmc dev 1 => ums 0 mmc 1 +WiFi +==== + + # wpa_passphrase ACCESSPOINTNAME >> /etc/wpa_supplicant.conf + (type password and enter) + # wpa_supplicant -i wlan0 -c /etc/wpa_supplicant.conf -B + # udhcpc -i wlan0 + # ping google.com + -- Jagan Teki <[email protected]> 20-Jun-2018
board/amarula/a64-relic/rootfs_overlay/lib/firmware/brcm/brcmfmac4330-sdio.txt new file +83 -0
83 lines not on this page · raw message
configs/amarula_a64_relic_defconfig +13 -0
@@ -42,6 +42,19 @@ BR2_PACKAGE_HOST_ANDROID_TOOLS_FASTBOOT=y BR2_PACKAGE_HOST_DOSFSTOOLS=y BR2_PACKAGE_HOST_GENIMAGE=y BR2_PACKAGE_HOST_MTOOLS=y +BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_MDEV=y BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh" BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/amarula/a64-relic/genimage.cfg" BR2_ROOTFS_POST_BUILD_SCRIPT="board/amarula/a64-relic/post-build.sh" +BR2_ROOTFS_OVERLAY="board/amarula/a64-relic/rootfs_overlay" + +# wireless firmware +BR2_PACKAGE_LINUX_FIRMWARE=y +BR2_PACKAGE_LINUX_FIRMWARE_BRCM_BCM43XX=y + +# wireless tools +BR2_PACKAGE_IW=y +BR2_PACKAGE_WPA_SUPPLICANT=y +BR2_PACKAGE_WPA_SUPPLICANT_NL80211=y +BR2_PACKAGE_WPA_SUPPLICANT_AP_SUPPORT=y +BR2_PACKAGE_WPA_SUPPLICANT_PASSPHRASE=y
Signature · 1 line
2.14.3
PATCH v3 1/2 board: amarula: Add A64-Relic support
In reply to Jagan TekiHello Jagan,
Thanks for this new iteration and the improvements. However, there is still one thing I don't understand.
board/amarula/a64-relic/readme.txt line 33
Quoted 8 lines · Jagan Teki
board/amarula/a64-relic/readme.txt new file +8
-0+build files at output/images/: + - sunxi-spl.bin + - u-boot.itb + - Image + - sun50i-a64-amarula-relic.dtb + - boot.vfat + - rootfs.ext4 + - sdcard.img
Why do you generate sdcard.img ? It is not used anywhere in the instructions below, because you're just flashing the eMMC through fastboot, on a per-partition basis.
Best regards,
Thomas
Signature · 3 lines
Thomas Petazzoni, CTO, Bootlin (formerly Free Electrons) Embedded Linux and Kernel engineering https://bootlin.com