clearfog: bump kernel and bootloader
PATCH 1/1 clearfog: bump kernel and bootloader
Update the kernel version to 4.17.2.
Update U-Boot version to 2018.05.
Migrate to U-Boot generic distro configuration which is easier than the hand written boot script.
Improve the 'dd' command example in readme.txt.
Cc Jan Kundr?t <[email protected]>
Signed-off-by Baruch Siach <[email protected]>
--- board/solidrun/clearfog/boot.scr.txt | 5 ----- board/solidrun/clearfog/extlinux.conf | 4 ++++ board/solidrun/clearfog/post-build.sh | 4 +++- board/solidrun/clearfog/readme.txt | 2 +- configs/solidrun_clearfog_defconfig | 10 ++++------ 5 files changed, 12 insertions(+), 13 deletions(-) delete mode 100644 board/solidrun/clearfog/boot.scr.txt create mode 100644 board/solidrun/clearfog/extlinux.conf
board/solidrun/clearfog/boot.scr.txt deleted +0 -5
@@ -1,5 +0,0 @@ -setenv fdtfile armada-388-clearfog-base.dtb -setenv bootargs root=/dev/mmcblk0p1 -load ${devtype} ${devnum}:${distro_bootpart} ${fdt_addr_r} ${prefix}/${fdtfile} -load ${devtype} ${devnum}:${distro_bootpart} ${kernel_addr_r} ${prefix}/zImage -bootz ${kernel_addr_r} - ${fdt_addr_r}
board/solidrun/clearfog/extlinux.conf new file +4 -0
@@ -0,0 +1,4 @@ +label Clearfog Linux + kernel /boot/zImage + devicetree /boot/armada-388-clearfog-base.dtb + append console=ttyS0,115200n8 root=/dev/mmcblk0p1 rootwait
board/solidrun/clearfog/post-build.sh +3 -1
@@ -1,3 +1,5 @@ #!/bin/sh -install -m 0644 -D $BINARIES_DIR/boot.scr $TARGET_DIR/boot/boot.scr +BOARD_DIR="$(dirname $0)" + +install -m 0644 -D $BOARD_DIR/extlinux.conf $TARGET_DIR/boot/extlinux/extlinux.conf
board/solidrun/clearfog/readme.txt +1 -1
@@ -47,7 +47,7 @@ Buildroot prepares a bootable "sdcard.img" image in the output/images/ directory, ready to be dumped on a microSD card. Launch the following command as root: - dd if=./output/images/sdcard.img of=/dev/<your-microsd-device> + dd if=output/images/sdcard.img of=/dev/<your-microsd-device> conv=fdatasync *** WARNING! The script will destroy all the card content. Use with care! ***
configs/solidrun_clearfog_defconfig +4 -6
@@ -5,8 +5,8 @@ BR2_ARM_ENABLE_NEON=y BR2_ARM_ENABLE_VFP=y BR2_ARM_FPU_NEON=y -# Linux headers same as kernel, a 4.12 series -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_12=y +# Linux headers same as kernel, a 4.17 series +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_17=y # System configuration BR2_ROOTFS_POST_BUILD_SCRIPT="board/solidrun/clearfog/post-build.sh"
@@ -16,7 +16,7 @@ BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/solidrun/clearfog/genimage.cfg" # Kernel BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.12.10" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.17.2" BR2_LINUX_KERNEL_DEFCONFIG="mvebu_v7" BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="board/solidrun/clearfog/linux.fragment" BR2_LINUX_KERNEL_DTS_SUPPORT=y
@@ -33,12 +33,10 @@ BR2_PACKAGE_HOST_GENIMAGE=y BR2_TARGET_UBOOT=y BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y BR2_TARGET_UBOOT_CUSTOM_VERSION=y -BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2017.07" +BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2018.05" BR2_TARGET_UBOOT_BOARD_DEFCONFIG="clearfog" BR2_TARGET_UBOOT_NEEDS_DTC=y BR2_TARGET_UBOOT_NEEDS_OPENSSL=y # BR2_TARGET_UBOOT_FORMAT_BIN is not set BR2_TARGET_UBOOT_FORMAT_CUSTOM=y BR2_TARGET_UBOOT_FORMAT_CUSTOM_NAME="u-boot-spl.kwb" -BR2_TARGET_UBOOT_BOOT_SCRIPT=y -BR2_TARGET_UBOOT_BOOT_SCRIPT_SOURCE="board/solidrun/clearfog/boot.scr.txt"
Signature · 1 line
2.18.0
PATCH 1/1 clearfog: bump kernel and bootloader
Hello,
Quoted 11 lines · Baruch Siach
Update the kernel version to 4.17.2.
Update U-Boot version to 2018.05.
Migrate to U-Boot generic distro configuration which is easier than the hand written boot script.
Improve the 'dd' command example in readme.txt.
Cc Jan Kundr?t <[email protected]>Signed-off-by Baruch Siach <[email protected]>
Quoted 9 lines
--- board/solidrun/clearfog/boot.scr.txt | 5 ----- board/solidrun/clearfog/extlinux.conf | 4 ++++ board/solidrun/clearfog/post-build.sh | 4 +++- board/solidrun/clearfog/readme.txt | 2 +- configs/solidrun_clearfog_defconfig | 10 ++++------ 5 files changed, 12 insertions(+), 13 deletions(-) delete mode 100644 board/solidrun/clearfog/boot.scr.txt create mode 100644 board/solidrun/clearfog/extlinux.conf
I've adjusted the prefix of the commit title and applied. Thanks!
Thomas
Signature · 3 lines
Thomas Petazzoni, CTO, Bootlin (formerly Free Electrons) Embedded Linux and Kernel engineering https://bootlin.com