ARM: mvebu_v7_defconfig: sync defconfig
Subsystems (2)
PATCH 1/2 ARM: mvebu_v7_defconfig: sync defconfig
Use savedefconfig to sync defconfig for current kernel. No change in generated configuration.
--- arch/arm/configs/mvebu_v7_defconfig | 12 ++---------- 1 file changed, 2 insertions(+), 10 deletions(-)
arch/arm/configs/mvebu_v7_defconfig +2 -10
@@ -1,5 +1,4 @@ CONFIG_SYSVIPC=y -CONFIG_FHANDLE=y CONFIG_HIGH_RES_TIMERS=y CONFIG_LOG_BUF_SHIFT=14 CONFIG_BLK_DEV_INITRD=y
@@ -16,10 +15,8 @@ CONFIG_MACH_ARMADA_39X=y CONFIG_MACH_ARMADA_XP=y CONFIG_MACH_DOVE=y CONFIG_PCI=y -CONFIG_PCI_MSI=y CONFIG_PCI_MVEBU=y CONFIG_SMP=y -CONFIG_AEABI=y CONFIG_HIGHMEM=y # CONFIG_COMPACTION is not set CONFIG_ZBOOT_ROM_TEXT=0x0
@@ -58,7 +55,6 @@ CONFIG_MTD_M25P80=y CONFIG_MTD_NAND=y CONFIG_MTD_NAND_MARVELL=y CONFIG_MTD_SPI_NOR=y -CONFIG_SRAM=y CONFIG_MTD_UBI=y CONFIG_EEPROM_AT24=y CONFIG_BLK_DEV_SD=y
@@ -67,12 +63,10 @@ CONFIG_SATA_AHCI=y CONFIG_AHCI_MVEBU=y CONFIG_SATA_MV=y CONFIG_NETDEVICES=y -CONFIG_NET_DSA_MV88E6XXX=y CONFIG_MV643XX_ETH=y CONFIG_MVNETA=y CONFIG_MVPP2=y CONFIG_MARVELL_PHY=y -CONFIG_FIXED_PHY=y CONFIG_MWIFIEX=y CONFIG_MWIFIEX_SDIO=y CONFIG_INPUT_EVDEV=y
@@ -88,10 +82,11 @@ CONFIG_SPI=y CONFIG_SPI_ORION=y CONFIG_GPIO_SYSFS=y CONFIG_GPIO_PCA953X=y -CONFIG_POWER_SUPPLY=y CONFIG_POWER_RESET=y CONFIG_POWER_RESET_GPIO=y +CONFIG_POWER_SUPPLY=y CONFIG_SENSORS_GPIO_FAN=y +CONFIG_SENSORS_PWM_FAN=y CONFIG_THERMAL=y CONFIG_ARMADA_THERMAL=y CONFIG_WATCHDOG=y
@@ -135,7 +130,6 @@ CONFIG_MV_XOR=y # CONFIG_IOMMU_SUPPORT is not set CONFIG_MEMORY=y CONFIG_PWM=y -CONFIG_SENSORS_PWM_FAN=y CONFIG_EXT4_FS=y CONFIG_ISO9660_FS=y CONFIG_JOLIET=y
@@ -153,10 +147,8 @@ CONFIG_NLS_ISO8859_2=y CONFIG_NLS_UTF8=y CONFIG_PRINTK_TIME=y CONFIG_DEBUG_INFO=y -CONFIG_DEBUG_FS=y CONFIG_MAGIC_SYSRQ=y # CONFIG_SCHED_DEBUG is not set -CONFIG_TIMER_STATS=y # CONFIG_DEBUG_BUGVERBOSE is not set CONFIG_DEBUG_USER=y CONFIG_CRYPTO_DEV_MARVELL_CESA=y
Signature · 1 line
2.18.0
PATCH 2/2 ARM: mvebu_v7_defconfig: enable SFP support
This enables support for SFP cages on SolidRun Armada 38x and 8k platforms.
--- arch/arm/configs/mvebu_v7_defconfig | 1 + 1 file changed, 1 insertion(+)
arch/arm/configs/mvebu_v7_defconfig +1 -0
@@ -66,6 +66,7 @@ CONFIG_NETDEVICES=y CONFIG_MV643XX_ETH=y CONFIG_MVNETA=y CONFIG_MVPP2=y +CONFIG_SFP=y CONFIG_MARVELL_PHY=y CONFIG_MWIFIEX=y CONFIG_MWIFIEX_SDIO=y
Signature · 1 line
2.18.0
Gregory CLEMENT
maintainerPATCH 2/2 ARM: mvebu_v7_defconfig: enable SFP support
Hi Baruch,
Quoted 4 lines · Baruch Siach
This enables support for SFP cages on SolidRun Armada 38x and 8k platforms.
Signed-off-by Baruch Siach <[email protected]>
Applied on mvebu/arm
Thanks,
Gregory
Quoted 19 lines
--- arch/arm/configs/mvebu_v7_defconfig | 1 + 1 file changed, 1 insertion(+)arch/arm/configs/mvebu_v7_defconfig +1
-0@@ -66,6 +66,7 @@ CONFIG_NETDEVICES=y CONFIG_MV643XX_ETH=y CONFIG_MVNETA=y CONFIG_MVPP2=y +CONFIG_SFP=y CONFIG_MARVELL_PHY=y CONFIG_MWIFIEX=y CONFIG_MWIFIEX_SDIO=ySignature · 1 line
2.18.0
Signature · 3 lines
Gregory Clement, Bootlin (formerly Free Electrons) Embedded Linux and Kernel engineering http://bootlin.com
PATCH 2/2 ARM: mvebu_v7_defconfig: enable SFP support
In reply to Baruch SiachHello Baruch,
Quoted 1 line · Baruch Siach
This enables support for SFP cages on SolidRun Armada 38x and 8k
You're running a 32-bit kernel on 8K platforms ?
Thomas
Signature · 3 lines
Thomas Petazzoni, CTO, Bootlin (formerly Free Electrons) Embedded Linux and Kernel engineering https://bootlin.com
PATCH 2/2 ARM: mvebu_v7_defconfig: enable SFP support
Hi Thomas,
Quoted 4 lines · Thomas Petazzoni
Quoted 1 line · Baruch Siach
This enables support for SFP cages on SolidRun Armada 38x and 8k
You're running a 32-bit kernel on 8K platforms ?
No, though that is probably possible.
But you are right. In practice this patch only affects 32-bit mvebu platforms. Support for 8k platforms would require a separate patch.
Gregory, you mentioned earlier that mvebu branches are not immutable yet. Can you drop reference to 8k platforms from the commit log?
Thanks,
baruch
Signature · 3 lines
http://baruch.siach.name/blog/ ~. .~ Tk Open Systems
=}------------------------------------------------ooO--U--Ooo------------{=
- baruch at tkos.co.il - tel: +972.52.368.4656, http://www.tkos.co.il -Gregory CLEMENT
maintainerPATCH 2/2 ARM: mvebu_v7_defconfig: enable SFP support
Hi Baruch,
Quoted 8 lines · Baruch Siach
Hi Thomas,
Quoted 4 lines · Thomas Petazzoni
Quoted 1 line · Baruch Siach
This enables support for SFP cages on SolidRun Armada 38x and 8k
You're running a 32-bit kernel on 8K platforms ?
Quoted 7 lines
No, though that is probably possible.
But you are right. In practice this patch only affects 32-bit mvebu platforms. Support for 8k platforms would require a separate patch.
Gregory, you mentioned earlier that mvebu branches are not immutable yet. Can you drop reference to 8k platforms from the commit log?
it's done, now
Gregory
Quoted 8 lines
Thanks,
baruchSignature · 3 lines
http://baruch.siach.name/blog/ ~. .~ Tk Open Systems =}------------------------------------------------ooO--U--Ooo------------{= - baruch at tkos.co.il - tel: +972.52.368.4656, http://www.tkos.co.il -
Signature · 3 lines
Gregory Clement, Bootlin (formerly Free Electrons) Embedded Linux and Kernel engineering http://bootlin.com
Gregory CLEMENT
maintainerPATCH 1/2 ARM: mvebu_v7_defconfig: sync defconfig
In reply to Baruch SiachHi Baruch,
Quoted 4 lines · Baruch Siach
Use savedefconfig to sync defconfig for current kernel. No change in generated configuration.
Signed-off-by Baruch Siach <[email protected]>
Applied on mvebu/arm
Thanks,
Gregory
Quoted 81 lines
--- arch/arm/configs/mvebu_v7_defconfig | 12 ++---------- 1 file changed, 2 insertions(+), 10 deletions(-)arch/arm/configs/mvebu_v7_defconfig +2
-10@@ -1,5 +1,4 @@ CONFIG_SYSVIPC=y -CONFIG_FHANDLE=y CONFIG_HIGH_RES_TIMERS=y CONFIG_LOG_BUF_SHIFT=14 CONFIG_BLK_DEV_INITRD=y@@ -16,10 +15,8 @@ CONFIG_MACH_ARMADA_39X=y CONFIG_MACH_ARMADA_XP=y CONFIG_MACH_DOVE=y CONFIG_PCI=y -CONFIG_PCI_MSI=y CONFIG_PCI_MVEBU=y CONFIG_SMP=y -CONFIG_AEABI=y CONFIG_HIGHMEM=y # CONFIG_COMPACTION is not set CONFIG_ZBOOT_ROM_TEXT=0x0@@ -58,7 +55,6 @@ CONFIG_MTD_M25P80=y CONFIG_MTD_NAND=y CONFIG_MTD_NAND_MARVELL=y CONFIG_MTD_SPI_NOR=y -CONFIG_SRAM=y CONFIG_MTD_UBI=y CONFIG_EEPROM_AT24=y CONFIG_BLK_DEV_SD=y@@ -67,12 +63,10 @@ CONFIG_SATA_AHCI=y CONFIG_AHCI_MVEBU=y CONFIG_SATA_MV=y CONFIG_NETDEVICES=y -CONFIG_NET_DSA_MV88E6XXX=y CONFIG_MV643XX_ETH=y CONFIG_MVNETA=y CONFIG_MVPP2=y CONFIG_MARVELL_PHY=y -CONFIG_FIXED_PHY=y CONFIG_MWIFIEX=y CONFIG_MWIFIEX_SDIO=y CONFIG_INPUT_EVDEV=y@@ -88,10 +82,11 @@ CONFIG_SPI=y CONFIG_SPI_ORION=y CONFIG_GPIO_SYSFS=y CONFIG_GPIO_PCA953X=y -CONFIG_POWER_SUPPLY=y CONFIG_POWER_RESET=y CONFIG_POWER_RESET_GPIO=y +CONFIG_POWER_SUPPLY=y CONFIG_SENSORS_GPIO_FAN=y +CONFIG_SENSORS_PWM_FAN=y CONFIG_THERMAL=y CONFIG_ARMADA_THERMAL=y CONFIG_WATCHDOG=y@@ -135,7 +130,6 @@ CONFIG_MV_XOR=y # CONFIG_IOMMU_SUPPORT is not set CONFIG_MEMORY=y CONFIG_PWM=y -CONFIG_SENSORS_PWM_FAN=y CONFIG_EXT4_FS=y CONFIG_ISO9660_FS=y CONFIG_JOLIET=y@@ -153,10 +147,8 @@ CONFIG_NLS_ISO8859_2=y CONFIG_NLS_UTF8=y CONFIG_PRINTK_TIME=y CONFIG_DEBUG_INFO=y -CONFIG_DEBUG_FS=y CONFIG_MAGIC_SYSRQ=y # CONFIG_SCHED_DEBUG is not set -CONFIG_TIMER_STATS=y # CONFIG_DEBUG_BUGVERBOSE is not set CONFIG_DEBUG_USER=y CONFIG_CRYPTO_DEV_MARVELL_CESA=ySignature · 1 line
2.18.0
Signature · 3 lines
Gregory Clement, Bootlin (formerly Free Electrons) Embedded Linux and Kernel engineering http://bootlin.com