dmaengine: fsl-edma: extract common fsl-edma code (no changes in behavior intended)
Subsystems (2)
PATCH v6 1/2 dmaengine: fsl-edma: extract common fsl-edma code (no changes in behavior intended)
This patch adds a new fsl-edma-common module to allow new mcf-edma module code to use most of the fsl-edma code.
Due to some differences between ColdFire edma (64 channels) and fsl-edma (32 channels), as register set offsets and some other points as the different interrupt organization and other minor things, a common module can collect most of the code for both 32 and 64 channel edma module versions.
---
Changes for v2:
- patch splitted into 4
- add fsl-edma-common module
Changes for v3:
none
Changes for v4:
- patch simplified from 4/4 into 2/2
- collecting all the fsl-edma-related changes
Changes for v5:
- add EXPORT_SYMBOL_GPL for all common functions
Changes for v6:
- adjusted comment header
- we need to free the interrupts at remove(), so removed all devm_ interrupt related calls
--- drivers/dma/Makefile | 2 +- drivers/dma/fsl-edma-common.c | 670 ++++++++++++++++++++++++++++++ drivers/dma/fsl-edma-common.h | 162 ++++++++ drivers/dma/fsl-edma.c | 753 ++-------------------------------- 4 files changed, 871 insertions(+), 716 deletions(-) create mode 100644 drivers/dma/fsl-edma-common.c create mode 100644 drivers/dma/fsl-edma-common.h
drivers/dma/Makefile +1 -1
@@ -31,7 +31,7 @@ obj-$(CONFIG_DW_AXI_DMAC) += dw-axi-dmac/ obj-$(CONFIG_DW_DMAC_CORE) += dw/ obj-$(CONFIG_EP93XX_DMA) += ep93xx_dma.o obj-$(CONFIG_FSL_DMA) += fsldma.o -obj-$(CONFIG_FSL_EDMA) += fsl-edma.o +obj-$(CONFIG_FSL_EDMA) += fsl-edma.o fsl-edma-common.o obj-$(CONFIG_FSL_RAID) += fsl_raid.o obj-$(CONFIG_HSU_DMA) += hsu/ obj-$(CONFIG_IMG_MDC_DMA) += img-mdc-dma.o
drivers/dma/fsl-edma-common.c new file +670 -0
670 lines not on this page · raw message
drivers/dma/fsl-edma-common.h new file +162 -0
162 lines not on this page · raw message
drivers/dma/fsl-edma.c +38 -715
899 lines not on this page · raw message