drm/i915: Use crtc_state->has_psr instead of CAN_PSR for pipe update
Subsystems (2)
PATCH v4 1/1 drm/i915: Use crtc_state->has_psr instead of CAN_PSR for pipe update
In commit "drm/i915: Wait for PSR exit before checking for vblank evasion", the idea was to limit the PSR IDLE checks when PSR is actually supported. While CAN_PSR does do that check, it doesn't applies on a per-crtc basis. crtc_state->has_psr is a more granular check that only applies to pipe(s) that have PSR enabled.
Currently, the driver supports PSR on port A + transcoder eDP, so only pipe A will wait for PSR to go IDLE, as it should, and other pipes should return immediately.
Without the has_psr check, non-PSR pipe_updates (pipe B/C in this case), end up waiting on PSR pipe (pipe A in this case) to exit PSR, which may incur substantial delays for non-PSR pipe updates alongwith the fact the it doesn't makes any sense.
vblank evasion")
v2: Remove unnecessary parantheses, make checkpatch happy.
v3: Move the has_psr check to intel_psr_wait_for_idle and commit
message changes (DK).
v4: Derive dev_priv from intel_crtc_state (DK)
--- drivers/gpu/drm/i915/intel_drv.h | 2 +- drivers/gpu/drm/i915/intel_psr.c | 7 ++++++- drivers/gpu/drm/i915/intel_sprite.c | 2 +- 3 files changed, 8 insertions(+), 3 deletions(-)
drivers/gpu/drm/i915/intel_drv.h +1 -1
@@ -1923,7 +1923,7 @@ void intel_psr_compute_config(struct intel_dp *intel_dp,void intel_psr_irq_control (struct drm_i915_private *dev_priv,bool debug);void intel_psr_irq_handler (struct drm_i915_private *dev_priv,u32 psr_iir);void intel_psr_short_pulse (struct intel_dp *intel_dp); -int intel_psr_wait_for_idle (struct drm_i915_private *dev_priv); +int intel_psr_wait_for_idle (const struct intel_crtc_state *new_crtc_state);/* intel_runtime_pm.c */ int intel_power_domains_init (struct drm_i915_private *);
drivers/gpu/drm/i915/intel_psr.c +6 -1
@@ -717,11 +717,16 @@ void intel_psr_disable(struct intel_dp *intel_dp,cancel_work_sync (&dev_priv->psr.work); } -int intel_psr_wait_for_idle (struct drm_i915_private *dev_priv) +int intel_psr_wait_for_idle (const struct intel_crtc_state *new_crtc_state) { +struct intel_crtc *crtc =to_intel_crtc (new_crtc_state->base.crtc); +struct drm_i915_private *dev_priv =to_i915 (crtc->base.dev);i915_reg_t reg;u32 mask; +if (!new_crtc_state->has_psr) +return 0 ; +/* * The sole user right now is intel_pipe_update_start(), * which won't race with psr_enable/disable, which is
drivers/gpu/drm/i915/intel_sprite.c +1 -1
@@ -118,7 +118,7 @@ void intel_pipe_update_start(const struct intel_crtc_state *new_crtc_state)* VBL interrupts will start the PSR exit and prevent a PSR * re-entry as well. */ -if (CAN_PSR (dev_priv) &&intel_psr_wait_for_idle (dev_priv)) +if (intel_psr_wait_for_idle (new_crtc_state))DRM_ERROR ("PSR idle timed out, atomic update may fail\n" );local_irq_disable ();
Signature · 6 lines
2.13.5 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Patchwork
CI✓ Fi.CI.BAT: success for drm/i915: Use crtc_state->has_psr instead of CAN_PSR for pipe update (rev4)
== Series Details ==
== Series Details ==
Series: drm/i915: Use crtc_state->has_psr instead of CAN_PSR for pipe update (rev4)
URL : https://patchwork.freedesktop.org/series/46104/
State : success
== Summary ==
= CI Bug Log - changes from CI_DRM_4458 -> Patchwork_9600 =
== Summary - SUCCESS ==
No regressions found.
External URL: https://patchwork.freedesktop.org/api/1.0/series/46104/revisions/4/mbox/
== Known issues ==
Here are the changes found in Patchwork_9600 that come from known issues:
=== IGT changes ===
==== Issues hit ====
igt@kms_pipe_crc_basic@suspend-read-crc-pipe-b:
fi-snb-2520m: PASS -> INCOMPLETE (fdo#103713)
==== Possible fixes ====
igt@gem_exec_suspend@basic-s4-devices:
fi-kbl-7500u: DMESG-WARN (fdo#105128, fdo#107139) -> PASS
igt@kms_flip@basic-flip-vs-dpms:
fi-skl-6700hq: DMESG-WARN (fdo#105998) -> PASS fdo#103713 https://bugs.freedesktop.org/show_bug.cgi?id=103713
fdo#105128 https://bugs.freedesktop.org/show_bug.cgi?id=105128
fdo#105998 https://bugs.freedesktop.org/show_bug.cgi?id=105998
fdo#107139 https://bugs.freedesktop.org/show_bug.cgi?id=107139
== Participating hosts (45 -> 40) ==
Additional (1): fi-skl-guc
Missing (6): fi-ilk-m540 fi-bxt-dsi fi-hsw-4200u fi-byt-squawks fi-bsw-cyan fi-ctg-p8600
== Build changes ==
* Linux: CI_DRM_4458 -> Patchwork_9600
CI_DRM_4458: dbed4c29cc0cd0225aae60c57ac2f4a738bb5a17 @ git://anongit.freedesktop.org/gfx-ci/linux
IGT_4544: 764160f214cd916ddb79408b9f28ac0ad2df40e0 @ git://anongit.freedesktop.org/xorg/app/intel-gpu-tools
Patchwork_9600: 1e1602d46abafb8f5722c411d653376f6b2e3c83 @ git://anongit.freedesktop.org/gfx-ci/linux
== Linux commits ==
1e1602d46aba drm/i915: Use crtc_state->has_psr instead of CAN_PSR for pipe update
== Logs ==
For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_9600/issues.html
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Patchwork
CI✓ Fi.CI.IGT: success for drm/i915: Use crtc_state->has_psr instead of CAN_PSR for pipe update (rev4)
In reply to Tarun Vyas== Series Details ==
== Series Details ==
Series: drm/i915: Use crtc_state->has_psr instead of CAN_PSR for pipe update (rev4)
URL : https://patchwork.freedesktop.org/series/46104/
State : success
== Summary ==
= CI Bug Log - changes from CI_DRM_4458_full -> Patchwork_9600_full =
== Summary - WARNING ==
Minor unknown changes coming with Patchwork_9600_full need to be verified manually.
If you think the reported changes have nothing to do with the changes introduced in Patchwork_9600_full, please notify your bug team to allow them to document this new failure mode, which will reduce false positives in CI.
== Possible new issues ==
Here are the unknown changes that may have been introduced in Patchwork_9600_full:
=== IGT changes ===
==== Warnings ====
igt@gem_exec_schedule@deep-blt:
shard-kbl: PASS -> SKIP
igt@gem_exec_schedule@deep-vebox:
shard-kbl: SKIP -> PASS +2== Known issues ==
Here are the changes found in Patchwork_9600_full that come from known issues:
=== IGT changes ===
==== Issues hit ====
igt@gem_ppgtt@blt-vs-render-ctx0:
shard-kbl: PASS -> INCOMPLETE (fdo#103665, fdo#106023)
igt@kms_flip@dpms-vs-vblank-race-interruptible:
shard-glk: PASS -> FAIL (fdo#103060)
igt@kms_rotation_crc@sprite-rotation-180:
shard-hsw: PASS -> FAIL (fdo#103925)
igt@pm_rpm@system-suspend:
shard-kbl: PASS -> INCOMPLETE (fdo#103665)
==== Possible fixes ====
igt@gem_exec_big:
shard-hsw: INCOMPLETE (fdo#103540) -> PASS
igt@kms_flip@2x-dpms-vs-vblank-race-interruptible:
shard-glk: FAIL (fdo#103060) -> PASS
igt@kms_flip@2x-flip-vs-absolute-wf_vblank:
shard-glk: FAIL (fdo#100368) -> PASS
igt@kms_flip_tiling@flip-to-y-tiled:
shard-glk: FAIL (fdo#103822, fdo#107161) -> PASS +1
igt@kms_flip_tiling@flip-y-tiled:
shard-glk: FAIL (fdo#107161) -> PASS fdo#100368 https://bugs.freedesktop.org/show_bug.cgi?id=100368
fdo#103060 https://bugs.freedesktop.org/show_bug.cgi?id=103060
fdo#103540 https://bugs.freedesktop.org/show_bug.cgi?id=103540
fdo#103665 https://bugs.freedesktop.org/show_bug.cgi?id=103665
fdo#103822 https://bugs.freedesktop.org/show_bug.cgi?id=103822
fdo#103925 https://bugs.freedesktop.org/show_bug.cgi?id=103925
fdo#106023 https://bugs.freedesktop.org/show_bug.cgi?id=106023
fdo#107161 https://bugs.freedesktop.org/show_bug.cgi?id=107161
== Participating hosts (5 -> 5) ==
No changes in participating hosts
== Build changes ==
* Linux: CI_DRM_4458 -> Patchwork_9600
CI_DRM_4458: dbed4c29cc0cd0225aae60c57ac2f4a738bb5a17 @ git://anongit.freedesktop.org/gfx-ci/linux
IGT_4544: 764160f214cd916ddb79408b9f28ac0ad2df40e0 @ git://anongit.freedesktop.org/xorg/app/intel-gpu-tools
Patchwork_9600: 1e1602d46abafb8f5722c411d653376f6b2e3c83 @ git://anongit.freedesktop.org/gfx-ci/linux
piglit_4509: fdc5a4ca11124ab8413c7988896eec4c97336694 @ git://anongit.freedesktop.org/piglit
== Logs ==
For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_9600/shards.html
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Quoted 9 lines · Tarun Vyas
In commit "drm/i915: Wait for PSR exit before checking for vblank evasion", the idea was to limit the PSR IDLE checks when PSR is actually supported. While
CAN_PSRdoes do that check, it doesn't applies on a per-crtc basis.crtc_state->has_psris a more granular check that only applies to pipe(s) that have PSR enabled.Currently, the driver supports PSR on port A + transcoder eDP, so only pipe A will wait for PSR to go IDLE, as it should, and other pipes should return immediately.
This still doesn't read right to me. Sorry for being pedantic, documenting the hardware behaviour, especially when it comes to PSR is important.
Quoted 4 lines
Without the
has_psrcheck, non-PSRpipe_updates(pipe B/C in this case), end up waiting on PSR pipe (pipe A in this case) to exit PSR, which may incur substantial delays for non-PSR pipe updates alongwith the fact the it doesn't makes any sense.
How about just saying "Without the crtc_state->has_psr check, we end up waiting on the eDP transcoder's PSR_STATUS register irrespective of whether the pipe being updated is driving it or not".
With the commit message altered, feel free to add
Quoted 73 lines
Fixes a608987970b9 ("drm/i915: Wait for PSR exit before checking forvblank evasion")
v2: Remove unnecessary parantheses, make checkpatch happy.
v3: Move the
has_psrcheck tointel_psr_wait_for_idleand commit message changes (DK).v4: Derive
dev_privfromintel_crtc_state(DK)Signed-off-by Tarun Vyas <[email protected]>---
drivers/gpu/drm/i915/intel_drv.h | 2 +-
drivers/gpu/drm/i915/intel_psr.c | 7 ++++++-
drivers/gpu/drm/i915/intel_sprite.c | 2 +-3 files changed, 8 insertions(+), 3 deletions(-)drivers/gpu/drm/i915/intel_drv.h +0
-0@@ -1923,7 +1923,7 @@ void intel_psr_compute_config(struct intel_dp *intel_dp,void
intel_psr_irq_control(struct drm_i915_private *dev_priv, bool debug);
voidintel_psr_irq_handler(struct drm_i915_private *dev_priv, u32 psr_iir);
voidintel_psr_short_pulse(struct intel_dp *intel_dp);drivers/gpu/drm/i915/intel_drv.h +1
-1-int intel_psr_wait_for_idle (struct drm_i915_private *dev_priv); +int intel_psr_wait_for_idle(const struct intel_crtc_state
*new_crtc_state);
/*intel_runtime_pm.c*/
intintel_power_domains_init(struct drm_i915_private *);drivers/gpu/drm/i915/intel_psr.c +0
-0@@ -717,11 +717,16 @@ void intel_psr_disable(struct intel_dp *intel_dp, cancel_work_sync(&dev_priv->psr.work); }drivers/gpu/drm/i915/intel_psr.c +1
-1-int intel_psr_wait_for_idle (struct drm_i915_private *dev_priv) +int intel_psr_wait_for_idle(const struct intel_crtc_state
*new_crtc_state)
{drivers/gpu/drm/i915/intel_psr.c +1
-0+ struct intel_crtc *crtc = to_intel_crtc(new_crtc_state-Quoted 1 line
base.crtc);
drivers/gpu/drm/i915/intel_psr.c +1
-0+struct drm_i915_private *dev_priv =to_i915 (crtc->base.dev);
i915_reg_treg;
u32 mask;drivers/gpu/drm/i915/intel_psr.c +3
-0+if (!new_crtc_state->has_psr) +return 0 ; +/*
* The sole user right now isintel_pipe_update_start(),
* which won't race with psr_enable/disable, which isdrivers/gpu/drm/i915/intel_sprite.c +1
-1@@ -118,7 +118,7 @@ void intel_pipe_update_start(const structintel_crtc_state *new_crtc_state) * VBL interrupts will start the PSR exit and prevent a PSR * re-entry as well. */ -if (CAN_PSR (dev_priv) &&intel_psr_wait_for_idle (dev_priv)) +if (intel_psr_wait_for_idle (new_crtc_state))
Quoted 4 lines
DRM_ERROR("PSR idle timed out, atomic update may fail\n");
local_irq_disable();
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx