Skip to contentSkip to conversation

arm64: dts: hikey: Remove keep-power-in-suspend property

PATCH In review Ryan Grachek 2 participants 2 messages Jul 13, 2018 – Jul 18, 2018

Subsystems (2)
Device tree bindings Arm/HiSilicon SoC support
lore
Share & tools
lore

Ryan Grachek

author
#0 lore raw

PATCH 1/1 arm64: dts: hikey: Remove keep-power-in-suspend property

Remove the keep-power-in-suspend property because it keeps wifi power on during suspend. This property is only required when enabling WoWLAN and should only be enabled based on need.

Signed-off-by Ryan Grachek <[email protected]>
---
 arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts | 1 -
 1 file changed, 1 deletion(-)
arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts +0 -1
index 7f12624f6c8e..f4964bee6a1a 100644
@@ -323,7 +323,6 @@
 			bus-width = <0x4>;
 			non-removable;
 			cap-power-off-card;
-			keep-power-in-suspend;
 			vmmc-supply = <&reg_vdd_3v3>;
 			mmc-pwrseq = <&wl1835_pwrseq>;
Signature · 1 line
2.11.0
maintainer
#1 lore raw

Hi Ryan,

Quoted 5 lines · Ryan Grachek

Remove the keep-power-in-suspend property because it keeps wifi power on during suspend. This property is only required when enabling WoWLAN and should only be enabled based on need.

Signed-off-by Ryan Grachek <[email protected]>

Thanks!
Applied to the hisilicon dt tree.

Best Regards,
Wei

Quoted 17 lines
---
 arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts | 1 -
 1 file changed, 1 deletion(-)
arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts +0 -1
index 7f12624f6c8e..f4964bee6a1a 100644
@@ -323,7 +323,6 @@
 			bus-width = <0x4>;
 			non-removable;
 			cap-power-off-card;
-			keep-power-in-suspend;
 			vmmc-supply = <&reg_vdd_3v3>;
 			mmc-pwrseq = <&wl1835_pwrseq>;