Skip to contentSkip to conversation

minnowboard_max: add CONFIG_IGB kconfig

PATCH New Pierre-Louis Bossart 3 participants 3 messages Jul 14, 2018 – Jul 19, 2018

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 minnowboard_max: add CONFIG_IGB kconfig

The 2017 MinnowBoard Turbot skews no longer use the Realtek 8169 Ethernet chip. The Turbot D0 uses The Intel I211, the Turbot Dual Ethernet has an I210 (quad-core) or I211 (dual-core).

Add CONFIG_IGB to the Linux config but keep the Realtek 8169 support to avoid breaking older boards

Tested on Turbot D0, lspci -k shows the igb driver is used:
03:00.0 Class 0200: 8086:1539 igb

---
 board/minnowboard/linux.config | 1 +
 1 file changed, 1 insertion(+)
board/minnowboard/linux.config +1 -0
index 03ffc5e371..27077dbcda 100644
@@ -21,6 +21,7 @@ CONFIG_SATA_AHCI=y
 CONFIG_ATA_PIIX=y
 CONFIG_NETDEVICES=y
 CONFIG_R8169=y
+CONFIG_IGB=y
 CONFIG_INPUT_EVDEV=y
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
Signature · 1 line
2.14.1
#1 lore raw

PATCH 1/1 minnowboard_max: add CONFIG_IGB kconfig

Hello,

Quoted 7 lines · Pierre-Louis Bossart

The 2017 MinnowBoard Turbot skews no longer use the Realtek 8169 Ethernet chip. The Turbot D0 uses The Intel I211, the Turbot Dual Ethernet has an I210 (quad-core) or I211 (dual-core).

Add CONFIG_IGB to the Linux config but keep the Realtek 8169 support to avoid breaking older boards

Quoted 7 lines

Tested on Turbot D0, lspci -k shows the igb driver is used:
03:00.0 Class 0200: 8086:1539 igb

---
 board/minnowboard/linux.config | 1 +
 1 file changed, 1 insertion(+)

Applied to master, thanks.

Thomas

Signature · 3 lines
Thomas Petazzoni, CTO, Bootlin (formerly Free Electrons)
Embedded Linux and Kernel engineering
https://bootlin.com
#2 lore raw

PATCH 1/1 minnowboard_max: add CONFIG_IGB kconfig

In reply to Pierre-Louis Bossart
Quoted 6 lines
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line

"Pierre-Louis" == Pierre-Louis Bossart <[email protected]> writes:

The 2017 MinnowBoard Turbot skews no longer use the Realtek 8169 Ethernet chip. The Turbot D0 uses The Intel I211, the Turbot Dual Ethernet has an I210 (quad-core) or I211 (dual-core).

Quoted 7 lines

Add CONFIG_IGB to the Linux config but keep the Realtek 8169 support to avoid breaking older boards

Tested on Turbot D0, lspci -k shows the igb driver is used:
03:00.0 Class 0200: 8086:1539 igb

Committed to 2018.02.x and 2018.05.x, thanks.

Signature · 1 line
Bye, Peter Korsgaard