Skip to contentSkip to conversation

spl: Kconfig: SPL_LOAD_FIT_ADDRESS to Kconfig

PATCH New Ibai Erkiaga 2 participants 2 messages Jun 26, 2018 – Jul 19, 2018 Arm/Zynq architecture

lore
Share & tools
lore

Ibai Erkiaga

author
#0 lore raw

PATCH v2 1/1 spl: Kconfig: SPL_LOAD_FIT_ADDRESS to Kconfig

Create a new KConfig entry to define FIT image position for SPL RAM mode.

Signed-off-by Ibai Erkiaga <[email protected]>

---

Changes in v2:
-Converted zynqmp and dra7xx_evm defconfig files

 Kconfig                                          | 7 +++++++
 common/spl/spl_ram.c                             | 4 ----
 configs/xilinx_zynqmp_zc1275_revB_defconfig      | 1 +
 configs/xilinx_zynqmp_zc1751_xm015_dc1_defconfig | 1 +
 configs/xilinx_zynqmp_zc1751_xm017_dc3_defconfig | 1 +
 configs/xilinx_zynqmp_zc1751_xm019_dc5_defconfig | 1 +
 configs/xilinx_zynqmp_zcu100_revC_defconfig      | 1 +
 configs/xilinx_zynqmp_zcu102_rev1_0_defconfig    | 1 +
 configs/xilinx_zynqmp_zcu102_revA_defconfig      | 1 +
 configs/xilinx_zynqmp_zcu102_revB_defconfig      | 1 +
 configs/xilinx_zynqmp_zcu104_revA_defconfig      | 1 +
 configs/xilinx_zynqmp_zcu104_revC_defconfig      | 1 +
 configs/xilinx_zynqmp_zcu106_revA_defconfig      | 1 +
 configs/xilinx_zynqmp_zcu111_revA_defconfig      | 1 +
 include/configs/dra7xx_evm.h                     | 1 -
 include/configs/xilinx_zynqmp.h                  | 3 ---
 scripts/config_whitelist.txt                     | 1 -
 17 files changed, 19 insertions(+), 9 deletions(-)
Kconfig +7 -0
index 5a82c95..b619ccc 100644
@@ -328,6 +328,13 @@ config SPL_LOAD_FIT
          particular it can handle selecting from multiple device tree
          and passing the correct one to U-Boot.
 
+config SPL_LOAD_FIT_ADDRESS
+       hex "SPL FIT Load Address"
+       default 0x0
+       depends on SPL_LOAD_FIT
+       help
+         Base address from where U-Boot FIT image will be loaded on SPL boot
+
 config SPL_LOAD_FIT_FULL
        bool "Enable SPL loading U-Boot as a FIT"
        select SPL_FIT
common/spl/spl_ram.c +0 -4
index e870193..561d1c0 100644
@@ -15,10 +15,6 @@
 #include <spl.h>
 #include <linux/libfdt.h>
 
-#ifndef CONFIG_SPL_LOAD_FIT_ADDRESS
-# define CONFIG_SPL_LOAD_FIT_ADDRESS   0
-#endif
-
 static ulong spl_ram_load_read(struct spl_load_info *load, ulong sector,
                               ulong count, void *buf)
 {
configs/xilinx_zynqmp_zc1275_revB_defconfig +1 -0
index 876cd3c..f46e25b 100644
@@ -14,6 +14,7 @@ CONFIG_DISTRO_DEFAULTS=y
 CONFIG_FIT=y
 CONFIG_FIT_VERBOSE=y
 CONFIG_SPL_LOAD_FIT=y
+CONFIG_SPL_LOAD_FIT_ADDRESS=0x10000000
 # CONFIG_DISPLAY_CPUINFO is not set
 CONFIG_SPL_OS_BOOT=y
 CONFIG_SPL_RAM_SUPPORT=y
configs/xilinx_zynqmp_zc1751_xm015_dc1_defconfig +1 -0
index cf84e76..bb0c9c9 100644
@@ -14,6 +14,7 @@ CONFIG_DISTRO_DEFAULTS=y
 CONFIG_FIT=y
 CONFIG_FIT_VERBOSE=y
 CONFIG_SPL_LOAD_FIT=y
+CONFIG_SPL_LOAD_FIT_ADDRESS=0x10000000
 # CONFIG_DISPLAY_CPUINFO is not set
 CONFIG_BOARD_EARLY_INIT_R=y
 CONFIG_SPL_OS_BOOT=y
configs/xilinx_zynqmp_zc1751_xm017_dc3_defconfig +1 -0
index aa7cf97..3c3d83d 100644
@@ -14,6 +14,7 @@ CONFIG_DISTRO_DEFAULTS=y
 CONFIG_FIT=y
 CONFIG_FIT_VERBOSE=y
 CONFIG_SPL_LOAD_FIT=y
+CONFIG_SPL_LOAD_FIT_ADDRESS=0x10000000
 # CONFIG_DISPLAY_CPUINFO is not set
 CONFIG_SPL_OS_BOOT=y
 CONFIG_SPL_RAM_SUPPORT=y
configs/xilinx_zynqmp_zc1751_xm019_dc5_defconfig +1 -0
index 11b72e3..2e94646 100644
@@ -12,6 +12,7 @@ CONFIG_DISTRO_DEFAULTS=y
 CONFIG_FIT=y
 CONFIG_FIT_VERBOSE=y
 CONFIG_SPL_LOAD_FIT=y
+CONFIG_SPL_LOAD_FIT_ADDRESS=0x10000000
 # CONFIG_DISPLAY_CPUINFO is not set
 CONFIG_BOARD_EARLY_INIT_R=y
 CONFIG_SPL_OS_BOOT=y
configs/xilinx_zynqmp_zcu100_revC_defconfig +1 -0
index d73e56a..cb95dd0 100644
@@ -14,6 +14,7 @@ CONFIG_DISTRO_DEFAULTS=y
 CONFIG_FIT=y
 CONFIG_FIT_VERBOSE=y
 CONFIG_SPL_LOAD_FIT=y
+CONFIG_SPL_LOAD_FIT_ADDRESS=0x10000000
 # CONFIG_DISPLAY_CPUINFO is not set
 CONFIG_SPL_OS_BOOT=y
 CONFIG_SPL_RAM_SUPPORT=y
configs/xilinx_zynqmp_zcu102_rev1_0_defconfig +1 -0
index 49a14d8..6fefeae 100644
@@ -14,6 +14,7 @@ CONFIG_DISTRO_DEFAULTS=y
 CONFIG_FIT=y
 CONFIG_FIT_VERBOSE=y
 CONFIG_SPL_LOAD_FIT=y
+CONFIG_SPL_LOAD_FIT_ADDRESS=0x10000000
 # CONFIG_DISPLAY_CPUINFO is not set
 CONFIG_BOARD_EARLY_INIT_R=y
 CONFIG_SPL_OS_BOOT=y
configs/xilinx_zynqmp_zcu102_revA_defconfig +1 -0
index 05dad41..1df9b86 100644
@@ -14,6 +14,7 @@ CONFIG_DISTRO_DEFAULTS=y
 CONFIG_FIT=y
 CONFIG_FIT_VERBOSE=y
 CONFIG_SPL_LOAD_FIT=y
+CONFIG_SPL_LOAD_FIT_ADDRESS=0x10000000
 # CONFIG_DISPLAY_CPUINFO is not set
 CONFIG_BOARD_EARLY_INIT_R=y
 CONFIG_SPL_OS_BOOT=y
configs/xilinx_zynqmp_zcu102_revB_defconfig +1 -0
index b3711b4..823c192 100644
@@ -14,6 +14,7 @@ CONFIG_DISTRO_DEFAULTS=y
 CONFIG_FIT=y
 CONFIG_FIT_VERBOSE=y
 CONFIG_SPL_LOAD_FIT=y
+CONFIG_SPL_LOAD_FIT_ADDRESS=0x10000000
 # CONFIG_DISPLAY_CPUINFO is not set
 CONFIG_BOARD_EARLY_INIT_R=y
 CONFIG_SPL_OS_BOOT=y
configs/xilinx_zynqmp_zcu104_revA_defconfig +1 -0
index ab41023..ff444d9 100644
@@ -14,6 +14,7 @@ CONFIG_DISTRO_DEFAULTS=y
 CONFIG_FIT=y
 CONFIG_FIT_VERBOSE=y
 CONFIG_SPL_LOAD_FIT=y
+CONFIG_SPL_LOAD_FIT_ADDRESS=0x10000000
 # CONFIG_DISPLAY_CPUINFO is not set
 CONFIG_SPL_OS_BOOT=y
 CONFIG_SPL_RAM_SUPPORT=y
configs/xilinx_zynqmp_zcu104_revC_defconfig +1 -0
index 77b93a7..dfa7d1c 100644
@@ -14,6 +14,7 @@ CONFIG_DISTRO_DEFAULTS=y
 CONFIG_FIT=y
 CONFIG_FIT_VERBOSE=y
 CONFIG_SPL_LOAD_FIT=y
+CONFIG_SPL_LOAD_FIT_ADDRESS=0x10000000
 # CONFIG_DISPLAY_CPUINFO is not set
 CONFIG_SPL_OS_BOOT=y
 CONFIG_SPL_RAM_SUPPORT=y
configs/xilinx_zynqmp_zcu106_revA_defconfig +1 -0
index e644914..9053cf9 100644
@@ -14,6 +14,7 @@ CONFIG_DISTRO_DEFAULTS=y
 CONFIG_FIT=y
 CONFIG_FIT_VERBOSE=y
 CONFIG_SPL_LOAD_FIT=y
+CONFIG_SPL_LOAD_FIT_ADDRESS=0x10000000
 # CONFIG_DISPLAY_CPUINFO is not set
 CONFIG_SPL_OS_BOOT=y
 CONFIG_SPL_RAM_SUPPORT=y
configs/xilinx_zynqmp_zcu111_revA_defconfig +1 -0
index c88ba52..d6f484d 100644
@@ -14,6 +14,7 @@ CONFIG_DISTRO_DEFAULTS=y
 CONFIG_FIT=y
 CONFIG_FIT_VERBOSE=y
 CONFIG_SPL_LOAD_FIT=y
+CONFIG_SPL_LOAD_FIT_ADDRESS=0x10000000
 # CONFIG_DISPLAY_CPUINFO is not set
 CONFIG_SPL_OS_BOOT=y
 CONFIG_SPL_RAM_SUPPORT=y
include/configs/dra7xx_evm.h +0 -1
index fa3f2b9..29de329 100644
@@ -55,7 +55,6 @@
 #ifdef CONFIG_SPL_BUILD
 #undef CONFIG_CMD_BOOTD
 #ifdef CONFIG_SPL_DFU_SUPPORT
-#define CONFIG_SPL_LOAD_FIT_ADDRESS 0x80200000
 #define DFUARGS \
        "dfu_bufsiz=0x10000\0" \
        DFU_ALT_INFO_RAM
include/configs/xilinx_zynqmp.h +0 -3
index e9086f9..819f428 100644
@@ -234,9 +234,6 @@
 /* ATF is my kernel image */
 #define CONFIG_SPL_FS_LOAD_KERNEL_NAME "atf-uboot.ub"
 
-/* FIT load address for RAM boot */
-#define CONFIG_SPL_LOAD_FIT_ADDRESS    0x10000000
-
 /* MMC support */
 #ifdef CONFIG_MMC_SDHCI_ZYNQ
 # define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION    1
scripts/config_whitelist.txt +0 -1
index 1a54337..d8a9aa2 100644
@@ -1926,7 +1926,6 @@ CONFIG_SPL_GENERATE_ATMEL_PMECC_HEADER
 CONFIG_SPL_INIT_MINIMAL
 CONFIG_SPL_JR0_LIODN_NS
 CONFIG_SPL_JR0_LIODN_S
-CONFIG_SPL_LOAD_FIT_ADDRESS
 CONFIG_SPL_MAX_FOOTPRINT
 CONFIG_SPL_MAX_PEB_SIZE
 CONFIG_SPL_MAX_SIZE

--
1.8.3.1

This email and any attachments are intended for the sole use of the named recipient(s) and contain(s) confidential information that may be proprietary, privileged or copyrighted under applicable law. If you are not the intended recipient, do not read, copy, or forward this email message or any attachments. Delete this email message and any attachments immediately.

#1 lore raw

PATCH v2 1/1 spl: Kconfig: SPL_LOAD_FIT_ADDRESS to Kconfig

Quoted 8 lines · Ibai Erkiaga

Create a new KConfig entry to define FIT image position for SPL RAM mode.

Signed-off-by Ibai Erkiaga <[email protected]>

---

Changes in v2:
-Converted zynqmp and dra7xx_evm defconfig files

The changes I request against v1 (sorry) still need to be addressed, thanks.

Signature · 8 lines
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20180719/c03c66db/attachment.sig>