Skip to contentSkip to conversation

net: ethernet: freescale: Use generic CRC32 implementation

PATCH Superseded Krzysztof Kozlowski 2 participants 3 messages Jul 22, 2018 – Jul 23, 2018

Subsystems (3)

v2 of 3 Superseded Latest is v3 →

lore
Share & tools
lore
#0 lore raw

PATCH v2 1/1 net: ethernet: freescale: Use generic CRC32 implementation

Use generic kernel CRC32 implementation because it:
1. Should be faster (uses lookup tables),
2. Removes duplicated CRC generation code,
3. Uses well-proven algorithm instead of coding it one more time.

---

Changes since v1:
1. Fix missing header inclusion.

---
 drivers/net/ethernet/freescale/fec_main.c | 13 +++----------
 1 file changed, 3 insertions(+), 10 deletions(-)
drivers/net/ethernet/freescale/fec_main.c +3 -10
index c729665107f5..37e823f41223 100644
@@ -48,6 +48,7 @@
 #include <linux/io.h>
 #include <linux/irq.h>
 #include <linux/clk.h>
+#include <linux/crc32.h>
 #include <linux/platform_device.h>
 #include <linux/mdio.h>
 #include <linux/phy.h>
@@ -2955,7 +2956,7 @@ static void set_multicast_list(struct net_device *ndev)
 {
 	struct fec_enet_private *fep = netdev_priv(ndev);
 	struct netdev_hw_addr *ha;
-	unsigned int i, bit, data, crc, tmp;
+	unsigned int crc, tmp;
 	unsigned char hash;
 	unsigned int hash_high = 0, hash_low = 0;
 
@@ -2983,15 +2984,7 @@ static void set_multicast_list(struct net_device *ndev)
 	/* Add the addresses in hash register */
 	netdev_for_each_mc_addr(ha, ndev) {
 		/* calculate crc32 value of mac address */
-		crc = 0xffffffff;
-
-		for (i = 0; i < ndev->addr_len; i++) {
-			data = ha->addr[i];
-			for (bit = 0; bit < 8; bit++, data >>= 1) {
-				crc = (crc >> 1) ^
-				(((crc ^ data) & 1) ? CRC32_POLY : 0);
-			}
-		}
+		crc = crc32_le(~0, ha->addr, ndev->addr_len);
 
 		/* only upper 6 bits (FEC_HASH_BITS) are used
 		 * which point to specific bit in the hash registers
Signature · 1 line
2.14.1
maintainer
#1 lore raw

From: Krzysztof Kozlowski <[email protected]>
Date: Sun, 22 Jul 2018 16:26:36 +0200

drivers/net/ethernet/freescale/fec_main.c static void set_multicast_list(struct net_device *ndev) · line 2987

Quoted 1 line
drivers/net/ethernet/freescale/fec_main.c +1 -0
+		crc = crc32_le(~0, ha->addr, ndev->addr_len);

This is "ether_crc_le(ha->addr, ndev->addr_len)" :-)

Please use it, thanks!

#2 lore raw
Quoted 8 lines · David Miller

From: Krzysztof Kozlowski <[email protected]>
Date: Sun, 22 Jul 2018 16:26:36 +0200

Quoted 1 line

+ crc = crc32_le(~0, ha->addr, ndev->addr_len);

This is "ether_crc_le(ha->addr, ndev->addr_len)" :-)

Please use it, thanks!

Sure, I'll fix it.

Best regards,
Krzysztof