qemu-iotests: Use host_device instead of file in 149

PATCH In review Kevin Wolf 3 participants 4 messages Jul 13, 2018 – Jul 23, 2018

Share & tools

Kevin Wolf

author

2018-07-13 07:11 UTC #0 lore raw

PATCH 1/1 qemu-iotests: Use host_device instead of file in 149

The test case uses block devices with driver=file, which causes the test to fail after commit 230ff73904 added a deprecation warning for this. Fix the test case to use driver=host_device and update the reference output accordingly.

Signed-off-by Kevin Wolf <[email protected]>

---
 tests/qemu-iotests/149     |   2 +-
 tests/qemu-iotests/149.out | 344 ++++++++++++++++++++++-----------------------
 2 files changed, 173 insertions(+), 173 deletions(-)

tests/qemu-iotests/149 +1 -1

index d3ffa259db..9e0cad76f9 100755
@@ -259,7 +259,7 @@ def qemu_io_image_args(config, dev=False):
     if dev:
         return [
             "--image-opts",
-            "driver=file,filename=%s" % config.device_path()]
+            "driver=host_device,filename=%s" % config.device_path()]
     else:
         return [
             "--object",

tests/qemu-iotests/149.out +172 ~~-172~~

1,290 lines not on this page · raw message

Signature · 1 line

2.13.6

John Snow

2018-07-13 18:12 UTC #1 lore raw

Quoted 6 lines · Kevin Wolf

The test case uses block devices with driver=file, which causes the test to fail after commit 230ff73904 added a deprecation warning for this. Fix the test case to use driver=host_device and update the reference output accordingly.
Signed-off-by Kevin Wolf <[email protected]>

149 [not run] requires password-less sudo access: sudo: a
password is required

Ah, this one hides from regression scripts quite well...

This test fails both before and after this patch for me, with

+Traceback (most recent call last):
+ File "149", line 525, in <module>
+ test_once(config, qemu_img=False)
+ File "149", line 336, in test_once
+ cryptsetup_open(config)
+ File "149", line 200, in cryptsetup_open
+ cryptsetup(args, password)
+ File "149", line 124, in cryptsetup
+ raise Exception(msg)
+Exception: Device qiotest-145-twofish-128-xts-plain64-sha1 already exists. +Command failed with code 17: File exists

Am I missing some prerequisite, maybe?

Anyway, this fixes the regression in the warning output from what I can see up to this failure, but I probably can't give an R-B here until I set my own setup straight.

Quoted 1,399 lines

---
 tests/qemu-iotests/149     |   2 +-
 tests/qemu-iotests/149.out | 344 ++++++++++++++++++++++-----------------------
 2 files changed, 173 insertions(+), 173 deletions(-)

tests/qemu-iotests/149 +1 -1

index d3ffa259db..9e0cad76f9 100755
@@ -259,7 +259,7 @@ def qemu_io_image_args(config, dev=False):
     if dev:
         return [
             "--image-opts",
-            "driver=file,filename=%s" % config.device_path()]
+            "driver=host_device,filename=%s" % config.device_path()]
     else:
         return [
             "--object",

tests/qemu-iotests/149.out +172 ~~-172~~

index 5dea00bfa8..1407ce6dad 100644
@@ -7,13 +7,13 @@ sudo cryptsetup -q -v luksFormat --cipher aes-xts-plain64 --key-size 512 --hash
 sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-xts-plain64-sha1.img qiotest-145-aes-256-xts-plain64-sha1
 # Write test pattern 0xa7
 sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain64-sha1
-qemu-io -c write -P 0xa7 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha1
+qemu-io -c write -P 0xa7 100M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha1
 wrote 10485760/10485760 bytes at offset 104857600
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 
 # Write test pattern 0x13
 sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain64-sha1
-qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha1
+qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha1
 wrote 10485760/10485760 bytes at offset 3298534883328
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)

@@ -43,13 +43,13 @@ wrote 10485760/10485760 bytes at offset 3298534883328
 sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-xts-plain64-sha1.img qiotest-145-aes-256-xts-plain64-sha1
 # Read test pattern 0x91
 sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain64-sha1
-qemu-io -c read -P 0x91 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha1
+qemu-io -c read -P 0x91 100M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha1
 read 10485760/10485760 bytes at offset 104857600
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 
 # Read test pattern 0x5e
 sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain64-sha1
-qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha1
+qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha1
 read 10485760/10485760 bytes at offset 3298534883328
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)

@@ -67,13 +67,13 @@ Formatting 'TEST_DIR/luks-aes-256-xts-plain64-sha1.img', fmt=luks size=439804651
 sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-xts-plain64-sha1.img qiotest-145-aes-256-xts-plain64-sha1
 # Write test pattern 0xa7
 sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain64-sha1
-qemu-io -c write -P 0xa7 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha1
+qemu-io -c write -P 0xa7 100M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha1
 wrote 10485760/10485760 bytes at offset 104857600
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 
 # Write test pattern 0x13
 sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain64-sha1
-qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha1
+qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha1
 wrote 10485760/10485760 bytes at offset 3298534883328
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)

@@ -103,13 +103,13 @@ wrote 10485760/10485760 bytes at offset 3298534883328
 sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-xts-plain64-sha1.img qiotest-145-aes-256-xts-plain64-sha1
 # Read test pattern 0x91
 sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain64-sha1
-qemu-io -c read -P 0x91 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha1
+qemu-io -c read -P 0x91 100M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha1
 read 10485760/10485760 bytes at offset 104857600
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 
 # Read test pattern 0x5e
 sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain64-sha1
-qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha1
+qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha1
 read 10485760/10485760 bytes at offset 3298534883328
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)

@@ -127,13 +127,13 @@ sudo cryptsetup -q -v luksFormat --cipher twofish-xts-plain64 --key-size 512 --h
 sudo cryptsetup -q -v luksOpen TEST_DIR/luks-twofish-256-xts-plain64-sha1.img qiotest-145-twofish-256-xts-plain64-sha1
 # Write test pattern 0xa7
 sudo chown UID:GID /dev/mapper/qiotest-145-twofish-256-xts-plain64-sha1
-qemu-io -c write -P 0xa7 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-twofish-256-xts-plain64-sha1
+qemu-io -c write -P 0xa7 100M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-twofish-256-xts-plain64-sha1
 wrote 10485760/10485760 bytes at offset 104857600
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 
 # Write test pattern 0x13
 sudo chown UID:GID /dev/mapper/qiotest-145-twofish-256-xts-plain64-sha1
-qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-twofish-256-xts-plain64-sha1
+qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-twofish-256-xts-plain64-sha1
 wrote 10485760/10485760 bytes at offset 3298534883328
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)

@@ -163,13 +163,13 @@ wrote 10485760/10485760 bytes at offset 3298534883328
 sudo cryptsetup -q -v luksOpen TEST_DIR/luks-twofish-256-xts-plain64-sha1.img qiotest-145-twofish-256-xts-plain64-sha1
 # Read test pattern 0x91
 sudo chown UID:GID /dev/mapper/qiotest-145-twofish-256-xts-plain64-sha1
-qemu-io -c read -P 0x91 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-twofish-256-xts-plain64-sha1
+qemu-io -c read -P 0x91 100M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-twofish-256-xts-plain64-sha1
 read 10485760/10485760 bytes at offset 104857600
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 
 # Read test pattern 0x5e
 sudo chown UID:GID /dev/mapper/qiotest-145-twofish-256-xts-plain64-sha1
-qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-twofish-256-xts-plain64-sha1
+qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-twofish-256-xts-plain64-sha1
 read 10485760/10485760 bytes at offset 3298534883328
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)

@@ -187,13 +187,13 @@ Formatting 'TEST_DIR/luks-twofish-256-xts-plain64-sha1.img', fmt=luks size=43980
 sudo cryptsetup -q -v luksOpen TEST_DIR/luks-twofish-256-xts-plain64-sha1.img qiotest-145-twofish-256-xts-plain64-sha1
 # Write test pattern 0xa7
 sudo chown UID:GID /dev/mapper/qiotest-145-twofish-256-xts-plain64-sha1
-qemu-io -c write -P 0xa7 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-twofish-256-xts-plain64-sha1
+qemu-io -c write -P 0xa7 100M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-twofish-256-xts-plain64-sha1
 wrote 10485760/10485760 bytes at offset 104857600
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 
 # Write test pattern 0x13
 sudo chown UID:GID /dev/mapper/qiotest-145-twofish-256-xts-plain64-sha1
-qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-twofish-256-xts-plain64-sha1
+qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-twofish-256-xts-plain64-sha1
 wrote 10485760/10485760 bytes at offset 3298534883328
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)

@@ -223,13 +223,13 @@ wrote 10485760/10485760 bytes at offset 3298534883328
 sudo cryptsetup -q -v luksOpen TEST_DIR/luks-twofish-256-xts-plain64-sha1.img qiotest-145-twofish-256-xts-plain64-sha1
 # Read test pattern 0x91
 sudo chown UID:GID /dev/mapper/qiotest-145-twofish-256-xts-plain64-sha1
-qemu-io -c read -P 0x91 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-twofish-256-xts-plain64-sha1
+qemu-io -c read -P 0x91 100M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-twofish-256-xts-plain64-sha1
 read 10485760/10485760 bytes at offset 104857600
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 
 # Read test pattern 0x5e
 sudo chown UID:GID /dev/mapper/qiotest-145-twofish-256-xts-plain64-sha1
-qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-twofish-256-xts-plain64-sha1
+qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-twofish-256-xts-plain64-sha1
 read 10485760/10485760 bytes at offset 3298534883328
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)

@@ -247,13 +247,13 @@ sudo cryptsetup -q -v luksFormat --cipher serpent-xts-plain64 --key-size 512 --h
 sudo cryptsetup -q -v luksOpen TEST_DIR/luks-serpent-256-xts-plain64-sha1.img qiotest-145-serpent-256-xts-plain64-sha1
 # Write test pattern 0xa7
 sudo chown UID:GID /dev/mapper/qiotest-145-serpent-256-xts-plain64-sha1
-qemu-io -c write -P 0xa7 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-serpent-256-xts-plain64-sha1
+qemu-io -c write -P 0xa7 100M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-serpent-256-xts-plain64-sha1
 wrote 10485760/10485760 bytes at offset 104857600
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 
 # Write test pattern 0x13
 sudo chown UID:GID /dev/mapper/qiotest-145-serpent-256-xts-plain64-sha1
-qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-serpent-256-xts-plain64-sha1
+qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-serpent-256-xts-plain64-sha1
 wrote 10485760/10485760 bytes at offset 3298534883328
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)

@@ -283,13 +283,13 @@ wrote 10485760/10485760 bytes at offset 3298534883328
 sudo cryptsetup -q -v luksOpen TEST_DIR/luks-serpent-256-xts-plain64-sha1.img qiotest-145-serpent-256-xts-plain64-sha1
 # Read test pattern 0x91
 sudo chown UID:GID /dev/mapper/qiotest-145-serpent-256-xts-plain64-sha1
-qemu-io -c read -P 0x91 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-serpent-256-xts-plain64-sha1
+qemu-io -c read -P 0x91 100M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-serpent-256-xts-plain64-sha1
 read 10485760/10485760 bytes at offset 104857600
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 
 # Read test pattern 0x5e
 sudo chown UID:GID /dev/mapper/qiotest-145-serpent-256-xts-plain64-sha1
-qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-serpent-256-xts-plain64-sha1
+qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-serpent-256-xts-plain64-sha1
 read 10485760/10485760 bytes at offset 3298534883328
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)

@@ -307,13 +307,13 @@ Formatting 'TEST_DIR/luks-serpent-256-xts-plain64-sha1.img', fmt=luks size=43980
 sudo cryptsetup -q -v luksOpen TEST_DIR/luks-serpent-256-xts-plain64-sha1.img qiotest-145-serpent-256-xts-plain64-sha1
 # Write test pattern 0xa7
 sudo chown UID:GID /dev/mapper/qiotest-145-serpent-256-xts-plain64-sha1
-qemu-io -c write -P 0xa7 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-serpent-256-xts-plain64-sha1
+qemu-io -c write -P 0xa7 100M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-serpent-256-xts-plain64-sha1
 wrote 10485760/10485760 bytes at offset 104857600
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 
 # Write test pattern 0x13
 sudo chown UID:GID /dev/mapper/qiotest-145-serpent-256-xts-plain64-sha1
-qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-serpent-256-xts-plain64-sha1
+qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-serpent-256-xts-plain64-sha1
 wrote 10485760/10485760 bytes at offset 3298534883328
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)

@@ -343,13 +343,13 @@ wrote 10485760/10485760 bytes at offset 3298534883328
 sudo cryptsetup -q -v luksOpen TEST_DIR/luks-serpent-256-xts-plain64-sha1.img qiotest-145-serpent-256-xts-plain64-sha1
 # Read test pattern 0x91
 sudo chown UID:GID /dev/mapper/qiotest-145-serpent-256-xts-plain64-sha1
-qemu-io -c read -P 0x91 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-serpent-256-xts-plain64-sha1
+qemu-io -c read -P 0x91 100M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-serpent-256-xts-plain64-sha1
 read 10485760/10485760 bytes at offset 104857600
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 
 # Read test pattern 0x5e
 sudo chown UID:GID /dev/mapper/qiotest-145-serpent-256-xts-plain64-sha1
-qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-serpent-256-xts-plain64-sha1
+qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-serpent-256-xts-plain64-sha1
 read 10485760/10485760 bytes at offset 3298534883328
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)

@@ -367,13 +367,13 @@ sudo cryptsetup -q -v luksFormat --cipher cast5-cbc-plain64 --key-size 128 --has
 sudo cryptsetup -q -v luksOpen TEST_DIR/luks-cast5-128-cbc-plain64-sha1.img qiotest-145-cast5-128-cbc-plain64-sha1
 # Write test pattern 0xa7
 sudo chown UID:GID /dev/mapper/qiotest-145-cast5-128-cbc-plain64-sha1
-qemu-io -c write -P 0xa7 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-cast5-128-cbc-plain64-sha1
+qemu-io -c write -P 0xa7 100M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-cast5-128-cbc-plain64-sha1
 wrote 10485760/10485760 bytes at offset 104857600
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 
 # Write test pattern 0x13
 sudo chown UID:GID /dev/mapper/qiotest-145-cast5-128-cbc-plain64-sha1
-qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-cast5-128-cbc-plain64-sha1
+qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-cast5-128-cbc-plain64-sha1
 wrote 10485760/10485760 bytes at offset 3298534883328
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)

@@ -403,13 +403,13 @@ wrote 10485760/10485760 bytes at offset 3298534883328
 sudo cryptsetup -q -v luksOpen TEST_DIR/luks-cast5-128-cbc-plain64-sha1.img qiotest-145-cast5-128-cbc-plain64-sha1
 # Read test pattern 0x91
 sudo chown UID:GID /dev/mapper/qiotest-145-cast5-128-cbc-plain64-sha1
-qemu-io -c read -P 0x91 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-cast5-128-cbc-plain64-sha1
+qemu-io -c read -P 0x91 100M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-cast5-128-cbc-plain64-sha1
 read 10485760/10485760 bytes at offset 104857600
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 
 # Read test pattern 0x5e
 sudo chown UID:GID /dev/mapper/qiotest-145-cast5-128-cbc-plain64-sha1
-qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-cast5-128-cbc-plain64-sha1
+qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-cast5-128-cbc-plain64-sha1
 read 10485760/10485760 bytes at offset 3298534883328
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)

@@ -427,13 +427,13 @@ Formatting 'TEST_DIR/luks-cast5-128-cbc-plain64-sha1.img', fmt=luks size=4398046
 sudo cryptsetup -q -v luksOpen TEST_DIR/luks-cast5-128-cbc-plain64-sha1.img qiotest-145-cast5-128-cbc-plain64-sha1
 # Write test pattern 0xa7
 sudo chown UID:GID /dev/mapper/qiotest-145-cast5-128-cbc-plain64-sha1
-qemu-io -c write -P 0xa7 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-cast5-128-cbc-plain64-sha1
+qemu-io -c write -P 0xa7 100M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-cast5-128-cbc-plain64-sha1
 wrote 10485760/10485760 bytes at offset 104857600
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 
 # Write test pattern 0x13
 sudo chown UID:GID /dev/mapper/qiotest-145-cast5-128-cbc-plain64-sha1
-qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-cast5-128-cbc-plain64-sha1
+qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-cast5-128-cbc-plain64-sha1
 wrote 10485760/10485760 bytes at offset 3298534883328
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)

@@ -463,13 +463,13 @@ wrote 10485760/10485760 bytes at offset 3298534883328
 sudo cryptsetup -q -v luksOpen TEST_DIR/luks-cast5-128-cbc-plain64-sha1.img qiotest-145-cast5-128-cbc-plain64-sha1
 # Read test pattern 0x91
 sudo chown UID:GID /dev/mapper/qiotest-145-cast5-128-cbc-plain64-sha1
-qemu-io -c read -P 0x91 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-cast5-128-cbc-plain64-sha1
+qemu-io -c read -P 0x91 100M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-cast5-128-cbc-plain64-sha1
 read 10485760/10485760 bytes at offset 104857600
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 
 # Read test pattern 0x5e
 sudo chown UID:GID /dev/mapper/qiotest-145-cast5-128-cbc-plain64-sha1
-qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-cast5-128-cbc-plain64-sha1
+qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-cast5-128-cbc-plain64-sha1
 read 10485760/10485760 bytes at offset 3298534883328
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)

@@ -488,13 +488,13 @@ sudo cryptsetup -q -v luksFormat --cipher aes-cbc-plain --key-size 256 --hash sh
 sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-cbc-plain-sha1.img qiotest-145-aes-256-cbc-plain-sha1
 # Write test pattern 0xa7
 sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-cbc-plain-sha1
-qemu-io -c write -P 0xa7 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-cbc-plain-sha1
+qemu-io -c write -P 0xa7 100M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-cbc-plain-sha1
 wrote 10485760/10485760 bytes at offset 104857600
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 
 # Write test pattern 0x13
 sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-cbc-plain-sha1
-qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-cbc-plain-sha1
+qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-cbc-plain-sha1
 wrote 10485760/10485760 bytes at offset 3298534883328
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)

@@ -524,13 +524,13 @@ wrote 10485760/10485760 bytes at offset 3298534883328
 sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-cbc-plain-sha1.img qiotest-145-aes-256-cbc-plain-sha1
 # Read test pattern 0x91
 sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-cbc-plain-sha1
-qemu-io -c read -P 0x91 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-cbc-plain-sha1
+qemu-io -c read -P 0x91 100M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-cbc-plain-sha1
 read 10485760/10485760 bytes at offset 104857600
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 
 # Read test pattern 0x5e
 sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-cbc-plain-sha1
-qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-cbc-plain-sha1
+qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-cbc-plain-sha1
 read 10485760/10485760 bytes at offset 3298534883328
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)

@@ -548,13 +548,13 @@ Formatting 'TEST_DIR/luks-aes-256-cbc-plain-sha1.img', fmt=luks size=43980465111
 sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-cbc-plain-sha1.img qiotest-145-aes-256-cbc-plain-sha1
 # Write test pattern 0xa7
 sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-cbc-plain-sha1
-qemu-io -c write -P 0xa7 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-cbc-plain-sha1
+qemu-io -c write -P 0xa7 100M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-cbc-plain-sha1
 wrote 10485760/10485760 bytes at offset 104857600
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 
 # Write test pattern 0x13
 sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-cbc-plain-sha1
-qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-cbc-plain-sha1
+qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-cbc-plain-sha1
 wrote 10485760/10485760 bytes at offset 3298534883328
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)

@@ -584,13 +584,13 @@ wrote 10485760/10485760 bytes at offset 3298534883328
 sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-cbc-plain-sha1.img qiotest-145-aes-256-cbc-plain-sha1
 # Read test pattern 0x91
 sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-cbc-plain-sha1
-qemu-io -c read -P 0x91 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-cbc-plain-sha1
+qemu-io -c read -P 0x91 100M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-cbc-plain-sha1
 read 10485760/10485760 bytes at offset 104857600
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 
 # Read test pattern 0x5e
 sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-cbc-plain-sha1
-qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-cbc-plain-sha1
+qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-cbc-plain-sha1
 read 10485760/10485760 bytes at offset 3298534883328
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)

@@ -608,13 +608,13 @@ sudo cryptsetup -q -v luksFormat --cipher aes-cbc-plain64 --key-size 256 --hash
 sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-cbc-plain64-sha1.img qiotest-145-aes-256-cbc-plain64-sha1
 # Write test pattern 0xa7
 sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-cbc-plain64-sha1
-qemu-io -c write -P 0xa7 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-cbc-plain64-sha1
+qemu-io -c write -P 0xa7 100M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-cbc-plain64-sha1
 wrote 10485760/10485760 bytes at offset 104857600
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 
 # Write test pattern 0x13
 sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-cbc-plain64-sha1
-qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-cbc-plain64-sha1
+qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-cbc-plain64-sha1
 wrote 10485760/10485760 bytes at offset 3298534883328
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)

@@ -644,13 +644,13 @@ wrote 10485760/10485760 bytes at offset 3298534883328
 sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-cbc-plain64-sha1.img qiotest-145-aes-256-cbc-plain64-sha1
 # Read test pattern 0x91
 sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-cbc-plain64-sha1
-qemu-io -c read -P 0x91 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-cbc-plain64-sha1
+qemu-io -c read -P 0x91 100M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-cbc-plain64-sha1
 read 10485760/10485760 bytes at offset 104857600
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 
 # Read test pattern 0x5e
 sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-cbc-plain64-sha1
-qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-cbc-plain64-sha1
+qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-cbc-plain64-sha1
 read 10485760/10485760 bytes at offset 3298534883328
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)

@@ -668,13 +668,13 @@ Formatting 'TEST_DIR/luks-aes-256-cbc-plain64-sha1.img', fmt=luks size=439804651
 sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-cbc-plain64-sha1.img qiotest-145-aes-256-cbc-plain64-sha1
 # Write test pattern 0xa7
 sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-cbc-plain64-sha1
-qemu-io -c write -P 0xa7 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-cbc-plain64-sha1
+qemu-io -c write -P 0xa7 100M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-cbc-plain64-sha1
 wrote 10485760/10485760 bytes at offset 104857600
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 
 # Write test pattern 0x13
 sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-cbc-plain64-sha1
-qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-cbc-plain64-sha1
+qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-cbc-plain64-sha1
 wrote 10485760/10485760 bytes at offset 3298534883328
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)

@@ -704,13 +704,13 @@ wrote 10485760/10485760 bytes at offset 3298534883328
 sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-cbc-plain64-sha1.img qiotest-145-aes-256-cbc-plain64-sha1
 # Read test pattern 0x91
 sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-cbc-plain64-sha1
-qemu-io -c read -P 0x91 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-cbc-plain64-sha1
+qemu-io -c read -P 0x91 100M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-cbc-plain64-sha1
 read 10485760/10485760 bytes at offset 104857600
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 
 # Read test pattern 0x5e
 sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-cbc-plain64-sha1
-qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-cbc-plain64-sha1
+qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-cbc-plain64-sha1
 read 10485760/10485760 bytes at offset 3298534883328
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)

@@ -728,13 +728,13 @@ sudo cryptsetup -q -v luksFormat --cipher aes-cbc-essiv:sha256 --key-size 256 --
 sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-cbc-essiv-sha256-sha1.img qiotest-145-aes-256-cbc-essiv-sha256-sha1
 # Write test pattern 0xa7
 sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-cbc-essiv-sha256-sha1
-qemu-io -c write -P 0xa7 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-cbc-essiv-sha256-sha1
+qemu-io -c write -P 0xa7 100M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-cbc-essiv-sha256-sha1
 wrote 10485760/10485760 bytes at offset 104857600
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 
 # Write test pattern 0x13
 sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-cbc-essiv-sha256-sha1
-qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-cbc-essiv-sha256-sha1
+qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-cbc-essiv-sha256-sha1
 wrote 10485760/10485760 bytes at offset 3298534883328
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)

@@ -764,13 +764,13 @@ wrote 10485760/10485760 bytes at offset 3298534883328
 sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-cbc-essiv-sha256-sha1.img qiotest-145-aes-256-cbc-essiv-sha256-sha1
 # Read test pattern 0x91
 sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-cbc-essiv-sha256-sha1
-qemu-io -c read -P 0x91 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-cbc-essiv-sha256-sha1
+qemu-io -c read -P 0x91 100M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-cbc-essiv-sha256-sha1
 read 10485760/10485760 bytes at offset 104857600
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 
 # Read test pattern 0x5e
 sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-cbc-essiv-sha256-sha1
-qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-cbc-essiv-sha256-sha1
+qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-cbc-essiv-sha256-sha1
 read 10485760/10485760 bytes at offset 3298534883328
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)

@@ -788,13 +788,13 @@ Formatting 'TEST_DIR/luks-aes-256-cbc-essiv-sha256-sha1.img', fmt=luks size=4398
 sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-cbc-essiv-sha256-sha1.img qiotest-145-aes-256-cbc-essiv-sha256-sha1
 # Write test pattern 0xa7
 sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-cbc-essiv-sha256-sha1
-qemu-io -c write -P 0xa7 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-cbc-essiv-sha256-sha1
+qemu-io -c write -P 0xa7 100M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-cbc-essiv-sha256-sha1
 wrote 10485760/10485760 bytes at offset 104857600
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 
 # Write test pattern 0x13
 sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-cbc-essiv-sha256-sha1
-qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-cbc-essiv-sha256-sha1
+qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-cbc-essiv-sha256-sha1
 wrote 10485760/10485760 bytes at offset 3298534883328
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)

@@ -824,13 +824,13 @@ wrote 10485760/10485760 bytes at offset 3298534883328
 sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-cbc-essiv-sha256-sha1.img qiotest-145-aes-256-cbc-essiv-sha256-sha1
 # Read test pattern 0x91
 sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-cbc-essiv-sha256-sha1
-qemu-io -c read -P 0x91 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-cbc-essiv-sha256-sha1
+qemu-io -c read -P 0x91 100M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-cbc-essiv-sha256-sha1
 read 10485760/10485760 bytes at offset 104857600
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 
 # Read test pattern 0x5e
 sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-cbc-essiv-sha256-sha1
-qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-cbc-essiv-sha256-sha1
+qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-cbc-essiv-sha256-sha1
 read 10485760/10485760 bytes at offset 3298534883328
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)

@@ -848,13 +848,13 @@ sudo cryptsetup -q -v luksFormat --cipher aes-xts-essiv:sha256 --key-size 512 --
 sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-xts-essiv-sha256-sha1.img qiotest-145-aes-256-xts-essiv-sha256-sha1
 # Write test pattern 0xa7
 sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-essiv-sha256-sha1
-qemu-io -c write -P 0xa7 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-essiv-sha256-sha1
+qemu-io -c write -P 0xa7 100M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-xts-essiv-sha256-sha1
 wrote 10485760/10485760 bytes at offset 104857600
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 
 # Write test pattern 0x13
 sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-essiv-sha256-sha1
-qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-essiv-sha256-sha1
+qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-xts-essiv-sha256-sha1
 wrote 10485760/10485760 bytes at offset 3298534883328
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)

@@ -884,13 +884,13 @@ wrote 10485760/10485760 bytes at offset 3298534883328
 sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-xts-essiv-sha256-sha1.img qiotest-145-aes-256-xts-essiv-sha256-sha1
 # Read test pattern 0x91
 sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-essiv-sha256-sha1
-qemu-io -c read -P 0x91 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-essiv-sha256-sha1
+qemu-io -c read -P 0x91 100M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-xts-essiv-sha256-sha1
 read 10485760/10485760 bytes at offset 104857600
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 
 # Read test pattern 0x5e
 sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-essiv-sha256-sha1
-qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-essiv-sha256-sha1
+qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-xts-essiv-sha256-sha1
 read 10485760/10485760 bytes at offset 3298534883328
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)

@@ -908,13 +908,13 @@ Formatting 'TEST_DIR/luks-aes-256-xts-essiv-sha256-sha1.img', fmt=luks size=4398
 sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-xts-essiv-sha256-sha1.img qiotest-145-aes-256-xts-essiv-sha256-sha1
 # Write test pattern 0xa7
 sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-essiv-sha256-sha1
-qemu-io -c write -P 0xa7 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-essiv-sha256-sha1
+qemu-io -c write -P 0xa7 100M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-xts-essiv-sha256-sha1
 wrote 10485760/10485760 bytes at offset 104857600
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 
 # Write test pattern 0x13
 sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-essiv-sha256-sha1
-qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-essiv-sha256-sha1
+qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-xts-essiv-sha256-sha1
 wrote 10485760/10485760 bytes at offset 3298534883328
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)

@@ -944,13 +944,13 @@ wrote 10485760/10485760 bytes at offset 3298534883328
 sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-xts-essiv-sha256-sha1.img qiotest-145-aes-256-xts-essiv-sha256-sha1
 # Read test pattern 0x91
 sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-essiv-sha256-sha1
-qemu-io -c read -P 0x91 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-essiv-sha256-sha1
+qemu-io -c read -P 0x91 100M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-xts-essiv-sha256-sha1
 read 10485760/10485760 bytes at offset 104857600
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 
 # Read test pattern 0x5e
 sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-essiv-sha256-sha1
-qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-essiv-sha256-sha1
+qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-xts-essiv-sha256-sha1
 read 10485760/10485760 bytes at offset 3298534883328
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)

@@ -968,13 +968,13 @@ sudo cryptsetup -q -v luksFormat --cipher aes-xts-plain64 --key-size 256 --hash
 sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-128-xts-plain64-sha256-sha1.img qiotest-145-aes-128-xts-plain64-sha256-sha1
 # Write test pattern 0xa7
 sudo chown UID:GID /dev/mapper/qiotest-145-aes-128-xts-plain64-sha256-sha1
-qemu-io -c write -P 0xa7 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-128-xts-plain64-sha256-sha1
+qemu-io -c write -P 0xa7 100M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-128-xts-plain64-sha256-sha1
 wrote 10485760/10485760 bytes at offset 104857600
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 
 # Write test pattern 0x13
 sudo chown UID:GID /dev/mapper/qiotest-145-aes-128-xts-plain64-sha256-sha1
-qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-128-xts-plain64-sha256-sha1
+qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-128-xts-plain64-sha256-sha1
 wrote 10485760/10485760 bytes at offset 3298534883328
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)

@@ -1004,13 +1004,13 @@ wrote 10485760/10485760 bytes at offset 3298534883328
 sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-128-xts-plain64-sha256-sha1.img qiotest-145-aes-128-xts-plain64-sha256-sha1
 # Read test pattern 0x91
 sudo chown UID:GID /dev/mapper/qiotest-145-aes-128-xts-plain64-sha256-sha1
-qemu-io -c read -P 0x91 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-128-xts-plain64-sha256-sha1
+qemu-io -c read -P 0x91 100M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-128-xts-plain64-sha256-sha1
 read 10485760/10485760 bytes at offset 104857600
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 
 # Read test pattern 0x5e
 sudo chown UID:GID /dev/mapper/qiotest-145-aes-128-xts-plain64-sha256-sha1
-qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-128-xts-plain64-sha256-sha1
+qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-128-xts-plain64-sha256-sha1
 read 10485760/10485760 bytes at offset 3298534883328
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)

@@ -1028,13 +1028,13 @@ Formatting 'TEST_DIR/luks-aes-128-xts-plain64-sha256-sha1.img', fmt=luks size=43
 sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-128-xts-plain64-sha256-sha1.img qiotest-145-aes-128-xts-plain64-sha256-sha1
 # Write test pattern 0xa7
 sudo chown UID:GID /dev/mapper/qiotest-145-aes-128-xts-plain64-sha256-sha1
-qemu-io -c write -P 0xa7 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-128-xts-plain64-sha256-sha1
+qemu-io -c write -P 0xa7 100M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-128-xts-plain64-sha256-sha1
 wrote 10485760/10485760 bytes at offset 104857600
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 
 # Write test pattern 0x13
 sudo chown UID:GID /dev/mapper/qiotest-145-aes-128-xts-plain64-sha256-sha1
-qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-128-xts-plain64-sha256-sha1
+qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-128-xts-plain64-sha256-sha1
 wrote 10485760/10485760 bytes at offset 3298534883328
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)

@@ -1064,13 +1064,13 @@ wrote 10485760/10485760 bytes at offset 3298534883328
 sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-128-xts-plain64-sha256-sha1.img qiotest-145-aes-128-xts-plain64-sha256-sha1
 # Read test pattern 0x91
 sudo chown UID:GID /dev/mapper/qiotest-145-aes-128-xts-plain64-sha256-sha1
-qemu-io -c read -P 0x91 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-128-xts-plain64-sha256-sha1
+qemu-io -c read -P 0x91 100M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-128-xts-plain64-sha256-sha1
 read 10485760/10485760 bytes at offset 104857600
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 
 # Read test pattern 0x5e
 sudo chown UID:GID /dev/mapper/qiotest-145-aes-128-xts-plain64-sha256-sha1
-qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-128-xts-plain64-sha256-sha1
+qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-128-xts-plain64-sha256-sha1
 read 10485760/10485760 bytes at offset 3298534883328
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)

@@ -1088,13 +1088,13 @@ sudo cryptsetup -q -v luksFormat --cipher aes-xts-plain64 --key-size 384 --hash
 sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-192-xts-plain64-sha256-sha1.img qiotest-145-aes-192-xts-plain64-sha256-sha1
 # Write test pattern 0xa7
 sudo chown UID:GID /dev/mapper/qiotest-145-aes-192-xts-plain64-sha256-sha1
-qemu-io -c write -P 0xa7 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-192-xts-plain64-sha256-sha1
+qemu-io -c write -P 0xa7 100M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-192-xts-plain64-sha256-sha1
 wrote 10485760/10485760 bytes at offset 104857600
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 
 # Write test pattern 0x13
 sudo chown UID:GID /dev/mapper/qiotest-145-aes-192-xts-plain64-sha256-sha1
-qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-192-xts-plain64-sha256-sha1
+qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-192-xts-plain64-sha256-sha1
 wrote 10485760/10485760 bytes at offset 3298534883328
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)

@@ -1124,13 +1124,13 @@ wrote 10485760/10485760 bytes at offset 3298534883328
 sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-192-xts-plain64-sha256-sha1.img qiotest-145-aes-192-xts-plain64-sha256-sha1
 # Read test pattern 0x91
 sudo chown UID:GID /dev/mapper/qiotest-145-aes-192-xts-plain64-sha256-sha1
-qemu-io -c read -P 0x91 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-192-xts-plain64-sha256-sha1
+qemu-io -c read -P 0x91 100M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-192-xts-plain64-sha256-sha1
 read 10485760/10485760 bytes at offset 104857600
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 
 # Read test pattern 0x5e
 sudo chown UID:GID /dev/mapper/qiotest-145-aes-192-xts-plain64-sha256-sha1
-qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-192-xts-plain64-sha256-sha1
+qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-192-xts-plain64-sha256-sha1
 read 10485760/10485760 bytes at offset 3298534883328
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)

@@ -1148,13 +1148,13 @@ Formatting 'TEST_DIR/luks-aes-192-xts-plain64-sha256-sha1.img', fmt=luks size=43
 sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-192-xts-plain64-sha256-sha1.img qiotest-145-aes-192-xts-plain64-sha256-sha1
 # Write test pattern 0xa7
 sudo chown UID:GID /dev/mapper/qiotest-145-aes-192-xts-plain64-sha256-sha1
-qemu-io -c write -P 0xa7 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-192-xts-plain64-sha256-sha1
+qemu-io -c write -P 0xa7 100M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-192-xts-plain64-sha256-sha1
 wrote 10485760/10485760 bytes at offset 104857600
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 
 # Write test pattern 0x13
 sudo chown UID:GID /dev/mapper/qiotest-145-aes-192-xts-plain64-sha256-sha1
-qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-192-xts-plain64-sha256-sha1
+qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-192-xts-plain64-sha256-sha1
 wrote 10485760/10485760 bytes at offset 3298534883328
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)

@@ -1184,13 +1184,13 @@ wrote 10485760/10485760 bytes at offset 3298534883328
 sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-192-xts-plain64-sha256-sha1.img qiotest-145-aes-192-xts-plain64-sha256-sha1
 # Read test pattern 0x91
 sudo chown UID:GID /dev/mapper/qiotest-145-aes-192-xts-plain64-sha256-sha1
-qemu-io -c read -P 0x91 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-192-xts-plain64-sha256-sha1
+qemu-io -c read -P 0x91 100M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-192-xts-plain64-sha256-sha1
 read 10485760/10485760 bytes at offset 104857600
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 
 # Read test pattern 0x5e
 sudo chown UID:GID /dev/mapper/qiotest-145-aes-192-xts-plain64-sha256-sha1
-qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-192-xts-plain64-sha256-sha1
+qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-192-xts-plain64-sha256-sha1
 read 10485760/10485760 bytes at offset 3298534883328
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)

@@ -1208,13 +1208,13 @@ sudo cryptsetup -q -v luksFormat --cipher twofish-xts-plain64 --key-size 256 --h
 sudo cryptsetup -q -v luksOpen TEST_DIR/luks-twofish-128-xts-plain64-sha1.img qiotest-145-twofish-128-xts-plain64-sha1
 # Write test pattern 0xa7
 sudo chown UID:GID /dev/mapper/qiotest-145-twofish-128-xts-plain64-sha1
-qemu-io -c write -P 0xa7 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-twofish-128-xts-plain64-sha1
+qemu-io -c write -P 0xa7 100M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-twofish-128-xts-plain64-sha1
 wrote 10485760/10485760 bytes at offset 104857600
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 
 # Write test pattern 0x13
 sudo chown UID:GID /dev/mapper/qiotest-145-twofish-128-xts-plain64-sha1
-qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-twofish-128-xts-plain64-sha1
+qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-twofish-128-xts-plain64-sha1
 wrote 10485760/10485760 bytes at offset 3298534883328
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)

@@ -1244,13 +1244,13 @@ wrote 10485760/10485760 bytes at offset 3298534883328
 sudo cryptsetup -q -v luksOpen TEST_DIR/luks-twofish-128-xts-plain64-sha1.img qiotest-145-twofish-128-xts-plain64-sha1
 # Read test pattern 0x91
 sudo chown UID:GID /dev/mapper/qiotest-145-twofish-128-xts-plain64-sha1
-qemu-io -c read -P 0x91 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-twofish-128-xts-plain64-sha1
+qemu-io -c read -P 0x91 100M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-twofish-128-xts-plain64-sha1
 read 10485760/10485760 bytes at offset 104857600
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 
 # Read test pattern 0x5e
 sudo chown UID:GID /dev/mapper/qiotest-145-twofish-128-xts-plain64-sha1
-qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-twofish-128-xts-plain64-sha1
+qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-twofish-128-xts-plain64-sha1
 read 10485760/10485760 bytes at offset 3298534883328
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)

@@ -1268,13 +1268,13 @@ Formatting 'TEST_DIR/luks-twofish-128-xts-plain64-sha1.img', fmt=luks size=43980
 sudo cryptsetup -q -v luksOpen TEST_DIR/luks-twofish-128-xts-plain64-sha1.img qiotest-145-twofish-128-xts-plain64-sha1
 # Write test pattern 0xa7
 sudo chown UID:GID /dev/mapper/qiotest-145-twofish-128-xts-plain64-sha1
-qemu-io -c write -P 0xa7 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-twofish-128-xts-plain64-sha1
+qemu-io -c write -P 0xa7 100M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-twofish-128-xts-plain64-sha1
 wrote 10485760/10485760 bytes at offset 104857600
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 
 # Write test pattern 0x13
 sudo chown UID:GID /dev/mapper/qiotest-145-twofish-128-xts-plain64-sha1
-qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-twofish-128-xts-plain64-sha1
+qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-twofish-128-xts-plain64-sha1
 wrote 10485760/10485760 bytes at offset 3298534883328
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)

@@ -1304,13 +1304,13 @@ wrote 10485760/10485760 bytes at offset 3298534883328
 sudo cryptsetup -q -v luksOpen TEST_DIR/luks-twofish-128-xts-plain64-sha1.img qiotest-145-twofish-128-xts-plain64-sha1
 # Read test pattern 0x91
 sudo chown UID:GID /dev/mapper/qiotest-145-twofish-128-xts-plain64-sha1
-qemu-io -c read -P 0x91 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-twofish-128-xts-plain64-sha1
+qemu-io -c read -P 0x91 100M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-twofish-128-xts-plain64-sha1
 read 10485760/10485760 bytes at offset 104857600
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 
 # Read test pattern 0x5e
 sudo chown UID:GID /dev/mapper/qiotest-145-twofish-128-xts-plain64-sha1
-qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-twofish-128-xts-plain64-sha1
+qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-twofish-128-xts-plain64-sha1
 read 10485760/10485760 bytes at offset 3298534883328
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)

@@ -1329,13 +1329,13 @@ sudo cryptsetup -q -v luksFormat --cipher serpent-xts-plain64 --key-size 256 --h
 sudo cryptsetup -q -v luksOpen TEST_DIR/luks-serpent-128-xts-plain64-sha1.img qiotest-145-serpent-128-xts-plain64-sha1
 # Write test pattern 0xa7
 sudo chown UID:GID /dev/mapper/qiotest-145-serpent-128-xts-plain64-sha1
-qemu-io -c write -P 0xa7 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-serpent-128-xts-plain64-sha1
+qemu-io -c write -P 0xa7 100M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-serpent-128-xts-plain64-sha1
 wrote 10485760/10485760 bytes at offset 104857600
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 
 # Write test pattern 0x13
 sudo chown UID:GID /dev/mapper/qiotest-145-serpent-128-xts-plain64-sha1
-qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-serpent-128-xts-plain64-sha1
+qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-serpent-128-xts-plain64-sha1
 wrote 10485760/10485760 bytes at offset 3298534883328
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)

@@ -1365,13 +1365,13 @@ wrote 10485760/10485760 bytes at offset 3298534883328
 sudo cryptsetup -q -v luksOpen TEST_DIR/luks-serpent-128-xts-plain64-sha1.img qiotest-145-serpent-128-xts-plain64-sha1
 # Read test pattern 0x91
 sudo chown UID:GID /dev/mapper/qiotest-145-serpent-128-xts-plain64-sha1
-qemu-io -c read -P 0x91 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-serpent-128-xts-plain64-sha1
+qemu-io -c read -P 0x91 100M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-serpent-128-xts-plain64-sha1
 read 10485760/10485760 bytes at offset 104857600
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 
 # Read test pattern 0x5e
 sudo chown UID:GID /dev/mapper/qiotest-145-serpent-128-xts-plain64-sha1
-qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-serpent-128-xts-plain64-sha1
+qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-serpent-128-xts-plain64-sha1
 read 10485760/10485760 bytes at offset 3298534883328
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)

@@ -1389,13 +1389,13 @@ Formatting 'TEST_DIR/luks-serpent-128-xts-plain64-sha1.img', fmt=luks size=43980
 sudo cryptsetup -q -v luksOpen TEST_DIR/luks-serpent-128-xts-plain64-sha1.img qiotest-145-serpent-128-xts-plain64-sha1
 # Write test pattern 0xa7
 sudo chown UID:GID /dev/mapper/qiotest-145-serpent-128-xts-plain64-sha1
-qemu-io -c write -P 0xa7 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-serpent-128-xts-plain64-sha1
+qemu-io -c write -P 0xa7 100M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-serpent-128-xts-plain64-sha1
 wrote 10485760/10485760 bytes at offset 104857600
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 
 # Write test pattern 0x13
 sudo chown UID:GID /dev/mapper/qiotest-145-serpent-128-xts-plain64-sha1
-qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-serpent-128-xts-plain64-sha1
+qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-serpent-128-xts-plain64-sha1
 wrote 10485760/10485760 bytes at offset 3298534883328
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)

@@ -1425,13 +1425,13 @@ wrote 10485760/10485760 bytes at offset 3298534883328
 sudo cryptsetup -q -v luksOpen TEST_DIR/luks-serpent-128-xts-plain64-sha1.img qiotest-145-serpent-128-xts-plain64-sha1
 # Read test pattern 0x91
 sudo chown UID:GID /dev/mapper/qiotest-145-serpent-128-xts-plain64-sha1
-qemu-io -c read -P 0x91 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-serpent-128-xts-plain64-sha1
+qemu-io -c read -P 0x91 100M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-serpent-128-xts-plain64-sha1
 read 10485760/10485760 bytes at offset 104857600
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 
 # Read test pattern 0x5e
 sudo chown UID:GID /dev/mapper/qiotest-145-serpent-128-xts-plain64-sha1
-qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-serpent-128-xts-plain64-sha1
+qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-serpent-128-xts-plain64-sha1
 read 10485760/10485760 bytes at offset 3298534883328
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)

@@ -1449,13 +1449,13 @@ sudo cryptsetup -q -v luksFormat --cipher serpent-xts-plain64 --key-size 384 --h
 sudo cryptsetup -q -v luksOpen TEST_DIR/luks-serpent-192-xts-plain64-sha1.img qiotest-145-serpent-192-xts-plain64-sha1
 # Write test pattern 0xa7
 sudo chown UID:GID /dev/mapper/qiotest-145-serpent-192-xts-plain64-sha1
-qemu-io -c write -P 0xa7 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-serpent-192-xts-plain64-sha1
+qemu-io -c write -P 0xa7 100M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-serpent-192-xts-plain64-sha1
 wrote 10485760/10485760 bytes at offset 104857600
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 
 # Write test pattern 0x13
 sudo chown UID:GID /dev/mapper/qiotest-145-serpent-192-xts-plain64-sha1
-qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-serpent-192-xts-plain64-sha1
+qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-serpent-192-xts-plain64-sha1
 wrote 10485760/10485760 bytes at offset 3298534883328
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)

@@ -1485,13 +1485,13 @@ wrote 10485760/10485760 bytes at offset 3298534883328
 sudo cryptsetup -q -v luksOpen TEST_DIR/luks-serpent-192-xts-plain64-sha1.img qiotest-145-serpent-192-xts-plain64-sha1
 # Read test pattern 0x91
 sudo chown UID:GID /dev/mapper/qiotest-145-serpent-192-xts-plain64-sha1
-qemu-io -c read -P 0x91 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-serpent-192-xts-plain64-sha1
+qemu-io -c read -P 0x91 100M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-serpent-192-xts-plain64-sha1
 read 10485760/10485760 bytes at offset 104857600
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 
 # Read test pattern 0x5e
 sudo chown UID:GID /dev/mapper/qiotest-145-serpent-192-xts-plain64-sha1
-qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-serpent-192-xts-plain64-sha1
+qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-serpent-192-xts-plain64-sha1
 read 10485760/10485760 bytes at offset 3298534883328
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)

@@ -1509,13 +1509,13 @@ Formatting 'TEST_DIR/luks-serpent-192-xts-plain64-sha1.img', fmt=luks size=43980
 sudo cryptsetup -q -v luksOpen TEST_DIR/luks-serpent-192-xts-plain64-sha1.img qiotest-145-serpent-192-xts-plain64-sha1
 # Write test pattern 0xa7
 sudo chown UID:GID /dev/mapper/qiotest-145-serpent-192-xts-plain64-sha1
-qemu-io -c write -P 0xa7 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-serpent-192-xts-plain64-sha1
+qemu-io -c write -P 0xa7 100M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-serpent-192-xts-plain64-sha1
 wrote 10485760/10485760 bytes at offset 104857600
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 
 # Write test pattern 0x13
 sudo chown UID:GID /dev/mapper/qiotest-145-serpent-192-xts-plain64-sha1
-qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-serpent-192-xts-plain64-sha1
+qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-serpent-192-xts-plain64-sha1
 wrote 10485760/10485760 bytes at offset 3298534883328
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)

@@ -1545,13 +1545,13 @@ wrote 10485760/10485760 bytes at offset 3298534883328
 sudo cryptsetup -q -v luksOpen TEST_DIR/luks-serpent-192-xts-plain64-sha1.img qiotest-145-serpent-192-xts-plain64-sha1
 # Read test pattern 0x91
 sudo chown UID:GID /dev/mapper/qiotest-145-serpent-192-xts-plain64-sha1
-qemu-io -c read -P 0x91 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-serpent-192-xts-plain64-sha1
+qemu-io -c read -P 0x91 100M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-serpent-192-xts-plain64-sha1
 read 10485760/10485760 bytes at offset 104857600
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 
 # Read test pattern 0x5e
 sudo chown UID:GID /dev/mapper/qiotest-145-serpent-192-xts-plain64-sha1
-qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-serpent-192-xts-plain64-sha1
+qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-serpent-192-xts-plain64-sha1
 read 10485760/10485760 bytes at offset 3298534883328
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)

@@ -1571,13 +1571,13 @@ sudo cryptsetup -q -v luksFormat --cipher aes-xts-plain64 --key-size 512 --hash
 sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-xts-plain64-sha224.img qiotest-145-aes-256-xts-plain64-sha224
 # Write test pattern 0xa7
 sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain64-sha224
-qemu-io -c write -P 0xa7 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha224
+qemu-io -c write -P 0xa7 100M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha224
 wrote 10485760/10485760 bytes at offset 104857600
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 
 # Write test pattern 0x13
 sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain64-sha224
-qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha224
+qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha224
 wrote 10485760/10485760 bytes at offset 3298534883328
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)

@@ -1607,13 +1607,13 @@ wrote 10485760/10485760 bytes at offset 3298534883328
 sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-xts-plain64-sha224.img qiotest-145-aes-256-xts-plain64-sha224
 # Read test pattern 0x91
 sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain64-sha224
-qemu-io -c read -P 0x91 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha224
+qemu-io -c read -P 0x91 100M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha224
 read 10485760/10485760 bytes at offset 104857600
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 
 # Read test pattern 0x5e
 sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain64-sha224
-qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha224
+qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha224
 read 10485760/10485760 bytes at offset 3298534883328
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)

@@ -1631,13 +1631,13 @@ Formatting 'TEST_DIR/luks-aes-256-xts-plain64-sha224.img', fmt=luks size=4398046
 sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-xts-plain64-sha224.img qiotest-145-aes-256-xts-plain64-sha224
 # Write test pattern 0xa7
 sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain64-sha224
-qemu-io -c write -P 0xa7 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha224
+qemu-io -c write -P 0xa7 100M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha224
 wrote 10485760/10485760 bytes at offset 104857600
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 
 # Write test pattern 0x13
 sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain64-sha224
-qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha224
+qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha224
 wrote 10485760/10485760 bytes at offset 3298534883328
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)

@@ -1667,13 +1667,13 @@ wrote 10485760/10485760 bytes at offset 3298534883328
 sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-xts-plain64-sha224.img qiotest-145-aes-256-xts-plain64-sha224
 # Read test pattern 0x91
 sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain64-sha224
-qemu-io -c read -P 0x91 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha224
+qemu-io -c read -P 0x91 100M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha224
 read 10485760/10485760 bytes at offset 104857600
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 
 # Read test pattern 0x5e
 sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain64-sha224
-qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha224
+qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha224
 read 10485760/10485760 bytes at offset 3298534883328
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)

@@ -1691,13 +1691,13 @@ sudo cryptsetup -q -v luksFormat --cipher aes-xts-plain64 --key-size 512 --hash
 sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-xts-plain64-sha256.img qiotest-145-aes-256-xts-plain64-sha256
 # Write test pattern 0xa7
 sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain64-sha256
-qemu-io -c write -P 0xa7 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha256
+qemu-io -c write -P 0xa7 100M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha256
 wrote 10485760/10485760 bytes at offset 104857600
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 
 # Write test pattern 0x13
 sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain64-sha256
-qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha256
+qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha256
 wrote 10485760/10485760 bytes at offset 3298534883328
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)

@@ -1727,13 +1727,13 @@ wrote 10485760/10485760 bytes at offset 3298534883328
 sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-xts-plain64-sha256.img qiotest-145-aes-256-xts-plain64-sha256
 # Read test pattern 0x91
 sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain64-sha256
-qemu-io -c read -P 0x91 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha256
+qemu-io -c read -P 0x91 100M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha256
 read 10485760/10485760 bytes at offset 104857600
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 
 # Read test pattern 0x5e
 sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain64-sha256
-qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha256
+qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha256
 read 10485760/10485760 bytes at offset 3298534883328
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)

@@ -1751,13 +1751,13 @@ Formatting 'TEST_DIR/luks-aes-256-xts-plain64-sha256.img', fmt=luks size=4398046
 sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-xts-plain64-sha256.img qiotest-145-aes-256-xts-plain64-sha256
 # Write test pattern 0xa7
 sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain64-sha256
-qemu-io -c write -P 0xa7 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha256
+qemu-io -c write -P 0xa7 100M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha256
 wrote 10485760/10485760 bytes at offset 104857600
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 
 # Write test pattern 0x13
 sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain64-sha256
-qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha256
+qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha256
 wrote 10485760/10485760 bytes at offset 3298534883328
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)

@@ -1787,13 +1787,13 @@ wrote 10485760/10485760 bytes at offset 3298534883328
 sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-xts-plain64-sha256.img qiotest-145-aes-256-xts-plain64-sha256
 # Read test pattern 0x91
 sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain64-sha256
-qemu-io -c read -P 0x91 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha256
+qemu-io -c read -P 0x91 100M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha256
 read 10485760/10485760 bytes at offset 104857600
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 
 # Read test pattern 0x5e
 sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain64-sha256
-qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha256
+qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha256
 read 10485760/10485760 bytes at offset 3298534883328
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)

@@ -1811,13 +1811,13 @@ sudo cryptsetup -q -v luksFormat --cipher aes-xts-plain64 --key-size 512 --hash
 sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-xts-plain64-sha384.img qiotest-145-aes-256-xts-plain64-sha384
 # Write test pattern 0xa7
 sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain64-sha384
-qemu-io -c write -P 0xa7 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha384
+qemu-io -c write -P 0xa7 100M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha384
 wrote 10485760/10485760 bytes at offset 104857600
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 
 # Write test pattern 0x13
 sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain64-sha384
-qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha384
+qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha384
 wrote 10485760/10485760 bytes at offset 3298534883328
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)

@@ -1847,13 +1847,13 @@ wrote 10485760/10485760 bytes at offset 3298534883328
 sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-xts-plain64-sha384.img qiotest-145-aes-256-xts-plain64-sha384
 # Read test pattern 0x91
 sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain64-sha384
-qemu-io -c read -P 0x91 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha384
+qemu-io -c read -P 0x91 100M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha384
 read 10485760/10485760 bytes at offset 104857600
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 
 # Read test pattern 0x5e
 sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain64-sha384
-qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha384
+qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha384
 read 10485760/10485760 bytes at offset 3298534883328
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)

@@ -1871,13 +1871,13 @@ Formatting 'TEST_DIR/luks-aes-256-xts-plain64-sha384.img', fmt=luks size=4398046
 sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-xts-plain64-sha384.img qiotest-145-aes-256-xts-plain64-sha384
 # Write test pattern 0xa7
 sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain64-sha384
-qemu-io -c write -P 0xa7 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha384
+qemu-io -c write -P 0xa7 100M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha384
 wrote 10485760/10485760 bytes at offset 104857600
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 
 # Write test pattern 0x13
 sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain64-sha384
-qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha384
+qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha384
 wrote 10485760/10485760 bytes at offset 3298534883328
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)

@@ -1907,13 +1907,13 @@ wrote 10485760/10485760 bytes at offset 3298534883328
 sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-xts-plain64-sha384.img qiotest-145-aes-256-xts-plain64-sha384
 # Read test pattern 0x91
 sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain64-sha384
-qemu-io -c read -P 0x91 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha384
+qemu-io -c read -P 0x91 100M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha384
 read 10485760/10485760 bytes at offset 104857600
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 
 # Read test pattern 0x5e
 sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain64-sha384
-qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha384
+qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha384
 read 10485760/10485760 bytes at offset 3298534883328
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)

@@ -1931,13 +1931,13 @@ sudo cryptsetup -q -v luksFormat --cipher aes-xts-plain64 --key-size 512 --hash
 sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-xts-plain64-sha512.img qiotest-145-aes-256-xts-plain64-sha512
 # Write test pattern 0xa7
 sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain64-sha512
-qemu-io -c write -P 0xa7 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha512
+qemu-io -c write -P 0xa7 100M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha512
 wrote 10485760/10485760 bytes at offset 104857600
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 
 # Write test pattern 0x13
 sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain64-sha512
-qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha512
+qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha512
 wrote 10485760/10485760 bytes at offset 3298534883328
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)

@@ -1967,13 +1967,13 @@ wrote 10485760/10485760 bytes at offset 3298534883328
 sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-xts-plain64-sha512.img qiotest-145-aes-256-xts-plain64-sha512
 # Read test pattern 0x91
 sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain64-sha512
-qemu-io -c read -P 0x91 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha512
+qemu-io -c read -P 0x91 100M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha512
 read 10485760/10485760 bytes at offset 104857600
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 
 # Read test pattern 0x5e
 sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain64-sha512
-qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha512
+qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha512
 read 10485760/10485760 bytes at offset 3298534883328
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)

@@ -1991,13 +1991,13 @@ Formatting 'TEST_DIR/luks-aes-256-xts-plain64-sha512.img', fmt=luks size=4398046
 sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-xts-plain64-sha512.img qiotest-145-aes-256-xts-plain64-sha512
 # Write test pattern 0xa7
 sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain64-sha512
-qemu-io -c write -P 0xa7 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha512
+qemu-io -c write -P 0xa7 100M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha512
 wrote 10485760/10485760 bytes at offset 104857600
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 
 # Write test pattern 0x13
 sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain64-sha512
-qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha512
+qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha512
 wrote 10485760/10485760 bytes at offset 3298534883328
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)

@@ -2027,13 +2027,13 @@ wrote 10485760/10485760 bytes at offset 3298534883328
 sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-xts-plain64-sha512.img qiotest-145-aes-256-xts-plain64-sha512
 # Read test pattern 0x91
 sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain64-sha512
-qemu-io -c read -P 0x91 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha512
+qemu-io -c read -P 0x91 100M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha512
 read 10485760/10485760 bytes at offset 104857600
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 
 # Read test pattern 0x5e
 sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain64-sha512
-qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha512
+qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha512
 read 10485760/10485760 bytes at offset 3298534883328
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)

@@ -2051,13 +2051,13 @@ sudo cryptsetup -q -v luksFormat --cipher aes-xts-plain64 --key-size 512 --hash
 sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-xts-plain64-ripemd160.img qiotest-145-aes-256-xts-plain64-ripemd160
 # Write test pattern 0xa7
 sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain64-ripemd160
-qemu-io -c write -P 0xa7 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-ripemd160
+qemu-io -c write -P 0xa7 100M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-ripemd160
 wrote 10485760/10485760 bytes at offset 104857600
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 
 # Write test pattern 0x13
 sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain64-ripemd160
-qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-ripemd160
+qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-ripemd160
 wrote 10485760/10485760 bytes at offset 3298534883328
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)

@@ -2087,13 +2087,13 @@ wrote 10485760/10485760 bytes at offset 3298534883328
 sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-xts-plain64-ripemd160.img qiotest-145-aes-256-xts-plain64-ripemd160
 # Read test pattern 0x91
 sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain64-ripemd160
-qemu-io -c read -P 0x91 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-ripemd160
+qemu-io -c read -P 0x91 100M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-ripemd160
 read 10485760/10485760 bytes at offset 104857600
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 
 # Read test pattern 0x5e
 sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain64-ripemd160
-qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-ripemd160
+qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-ripemd160
 read 10485760/10485760 bytes at offset 3298534883328
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)

@@ -2111,13 +2111,13 @@ Formatting 'TEST_DIR/luks-aes-256-xts-plain64-ripemd160.img', fmt=luks size=4398
 sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-xts-plain64-ripemd160.img qiotest-145-aes-256-xts-plain64-ripemd160
 # Write test pattern 0xa7
 sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain64-ripemd160
-qemu-io -c write -P 0xa7 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-ripemd160
+qemu-io -c write -P 0xa7 100M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-ripemd160
 wrote 10485760/10485760 bytes at offset 104857600
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 
 # Write test pattern 0x13
 sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain64-ripemd160
-qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-ripemd160
+qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-ripemd160
 wrote 10485760/10485760 bytes at offset 3298534883328
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)

@@ -2147,13 +2147,13 @@ wrote 10485760/10485760 bytes at offset 3298534883328
 sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-xts-plain64-ripemd160.img qiotest-145-aes-256-xts-plain64-ripemd160
 # Read test pattern 0x91
 sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain64-ripemd160
-qemu-io -c read -P 0x91 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-ripemd160
+qemu-io -c read -P 0x91 100M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-ripemd160
 read 10485760/10485760 bytes at offset 104857600
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 
 # Read test pattern 0x5e
 sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain64-ripemd160
-qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-ripemd160
+qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-ripemd160
 read 10485760/10485760 bytes at offset 3298534883328
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)

@@ -2171,13 +2171,13 @@ sudo cryptsetup -q -v luksFormat --cipher aes-xts-plain --key-size 512 --hash sh
 sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-xts-plain-sha1-pwslot3.img qiotest-145-aes-256-xts-plain-sha1-pwslot3
 # Write test pattern 0xa7
 sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain-sha1-pwslot3
-qemu-io -c write -P 0xa7 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain-sha1-pwslot3
+qemu-io -c write -P 0xa7 100M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-xts-plain-sha1-pwslot3
 wrote 10485760/10485760 bytes at offset 104857600
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 
 # Write test pattern 0x13
 sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain-sha1-pwslot3
-qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain-sha1-pwslot3
+qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-xts-plain-sha1-pwslot3
 wrote 10485760/10485760 bytes at offset 3298534883328
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)

@@ -2207,13 +2207,13 @@ wrote 10485760/10485760 bytes at offset 3298534883328
 sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-xts-plain-sha1-pwslot3.img qiotest-145-aes-256-xts-plain-sha1-pwslot3
 # Read test pattern 0x91
 sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain-sha1-pwslot3
-qemu-io -c read -P 0x91 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain-sha1-pwslot3
+qemu-io -c read -P 0x91 100M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-xts-plain-sha1-pwslot3
 read 10485760/10485760 bytes at offset 104857600
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 
 # Read test pattern 0x5e
 sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain-sha1-pwslot3
-qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain-sha1-pwslot3
+qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-xts-plain-sha1-pwslot3
 read 10485760/10485760 bytes at offset 3298534883328
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)

@@ -2245,13 +2245,13 @@ sudo cryptsetup -q -v luksAddKey TEST_DIR/luks-aes-256-xts-plain-sha1-pwallslots
 sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-xts-plain-sha1-pwallslots.img qiotest-145-aes-256-xts-plain-sha1-pwallslots
 # Write test pattern 0xa7
 sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain-sha1-pwallslots
-qemu-io -c write -P 0xa7 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain-sha1-pwallslots
+qemu-io -c write -P 0xa7 100M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-xts-plain-sha1-pwallslots
 wrote 10485760/10485760 bytes at offset 104857600
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 
 # Write test pattern 0x13
 sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain-sha1-pwallslots
-qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain-sha1-pwallslots
+qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-xts-plain-sha1-pwallslots
 wrote 10485760/10485760 bytes at offset 3298534883328
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)

@@ -2281,13 +2281,13 @@ wrote 10485760/10485760 bytes at offset 3298534883328
 sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-xts-plain-sha1-pwallslots.img qiotest-145-aes-256-xts-plain-sha1-pwallslots
 # Read test pattern 0x91
 sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain-sha1-pwallslots
-qemu-io -c read -P 0x91 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain-sha1-pwallslots
+qemu-io -c read -P 0x91 100M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-xts-plain-sha1-pwallslots
 read 10485760/10485760 bytes at offset 104857600
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 
 # Read test pattern 0x5e
 sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain-sha1-pwallslots
-qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain-sha1-pwallslots
+qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-xts-plain-sha1-pwallslots
 read 10485760/10485760 bytes at offset 3298534883328
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)

@@ -2305,13 +2305,13 @@ Formatting 'TEST_DIR/luks-aes-256-xts-plain-sha1-pwallslots.img', fmt=luks size=
 sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-xts-plain-sha1-pwallslots.img qiotest-145-aes-256-xts-plain-sha1-pwallslots
 # Write test pattern 0xa7
 sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain-sha1-pwallslots
-qemu-io -c write -P 0xa7 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain-sha1-pwallslots
+qemu-io -c write -P 0xa7 100M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-xts-plain-sha1-pwallslots
 wrote 10485760/10485760 bytes at offset 104857600
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 
 # Write test pattern 0x13
 sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain-sha1-pwallslots
-qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain-sha1-pwallslots
+qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-xts-plain-sha1-pwallslots
 wrote 10485760/10485760 bytes at offset 3298534883328
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)

@@ -2341,13 +2341,13 @@ wrote 10485760/10485760 bytes at offset 3298534883328
 sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-xts-plain-sha1-pwallslots.img qiotest-145-aes-256-xts-plain-sha1-pwallslots
 # Read test pattern 0x91
 sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain-sha1-pwallslots
-qemu-io -c read -P 0x91 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain-sha1-pwallslots
+qemu-io -c read -P 0x91 100M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-xts-plain-sha1-pwallslots
 read 10485760/10485760 bytes at offset 104857600
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 
 # Read test pattern 0x5e
 sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain-sha1-pwallslots
-qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain-sha1-pwallslots
+qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-xts-plain-sha1-pwallslots
 read 10485760/10485760 bytes at offset 3298534883328
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)

@@ -2365,13 +2365,13 @@ sudo cryptsetup -q -v luksFormat --cipher aes-cbc-essiv:sha256 --key-size 256 --
 sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-cbc-essiv-auto-sha1.img qiotest-145-aes-256-cbc-essiv-auto-sha1
 # Write test pattern 0xa7
 sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-cbc-essiv-auto-sha1
-qemu-io -c write -P 0xa7 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-cbc-essiv-auto-sha1
+qemu-io -c write -P 0xa7 100M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-cbc-essiv-auto-sha1
 wrote 10485760/10485760 bytes at offset 104857600
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 
 # Write test pattern 0x13
 sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-cbc-essiv-auto-sha1
-qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-cbc-essiv-auto-sha1
+qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-cbc-essiv-auto-sha1
 wrote 10485760/10485760 bytes at offset 3298534883328
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)

@@ -2401,13 +2401,13 @@ wrote 10485760/10485760 bytes at offset 3298534883328
 sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-cbc-essiv-auto-sha1.img qiotest-145-aes-256-cbc-essiv-auto-sha1
 # Read test pattern 0x91
 sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-cbc-essiv-auto-sha1
-qemu-io -c read -P 0x91 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-cbc-essiv-auto-sha1
+qemu-io -c read -P 0x91 100M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-cbc-essiv-auto-sha1
 read 10485760/10485760 bytes at offset 104857600
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 
 # Read test pattern 0x5e
 sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-cbc-essiv-auto-sha1
-qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-cbc-essiv-auto-sha1
+qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-cbc-essiv-auto-sha1
 read 10485760/10485760 bytes at offset 3298534883328
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)

@@ -2425,13 +2425,13 @@ Formatting 'TEST_DIR/luks-aes-256-cbc-essiv-auto-sha1.img', fmt=luks size=439804
 sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-cbc-essiv-auto-sha1.img qiotest-145-aes-256-cbc-essiv-auto-sha1
 # Write test pattern 0xa7
 sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-cbc-essiv-auto-sha1
-qemu-io -c write -P 0xa7 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-cbc-essiv-auto-sha1
+qemu-io -c write -P 0xa7 100M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-cbc-essiv-auto-sha1
 wrote 10485760/10485760 bytes at offset 104857600
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 
 # Write test pattern 0x13
 sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-cbc-essiv-auto-sha1
-qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-cbc-essiv-auto-sha1
+qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-cbc-essiv-auto-sha1
 wrote 10485760/10485760 bytes at offset 3298534883328
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)

@@ -2461,13 +2461,13 @@ wrote 10485760/10485760 bytes at offset 3298534883328
 sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-cbc-essiv-auto-sha1.img qiotest-145-aes-256-cbc-essiv-auto-sha1
 # Read test pattern 0x91
 sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-cbc-essiv-auto-sha1
-qemu-io -c read -P 0x91 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-cbc-essiv-auto-sha1
+qemu-io -c read -P 0x91 100M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-cbc-essiv-auto-sha1
 read 10485760/10485760 bytes at offset 104857600
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 
 # Read test pattern 0x5e
 sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-cbc-essiv-auto-sha1
-qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-cbc-essiv-auto-sha1
+qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-cbc-essiv-auto-sha1
 read 10485760/10485760 bytes at offset 3298534883328
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)

@@ -2485,13 +2485,13 @@ sudo cryptsetup -q -v luksFormat --cipher aes-cbc-plain64:sha256 --key-size 256
 sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-cbc-plain64-sha256-sha1.img qiotest-145-aes-256-cbc-plain64-sha256-sha1
 # Write test pattern 0xa7
 sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-cbc-plain64-sha256-sha1
-qemu-io -c write -P 0xa7 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-cbc-plain64-sha256-sha1
+qemu-io -c write -P 0xa7 100M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-cbc-plain64-sha256-sha1
 wrote 10485760/10485760 bytes at offset 104857600
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 
 # Write test pattern 0x13
 sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-cbc-plain64-sha256-sha1
-qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-cbc-plain64-sha256-sha1
+qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-cbc-plain64-sha256-sha1
 wrote 10485760/10485760 bytes at offset 3298534883328
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)

@@ -2521,13 +2521,13 @@ wrote 10485760/10485760 bytes at offset 3298534883328
 sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-cbc-plain64-sha256-sha1.img qiotest-145-aes-256-cbc-plain64-sha256-sha1
 # Read test pattern 0x91
 sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-cbc-plain64-sha256-sha1
-qemu-io -c read -P 0x91 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-cbc-plain64-sha256-sha1
+qemu-io -c read -P 0x91 100M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-cbc-plain64-sha256-sha1
 read 10485760/10485760 bytes at offset 104857600
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 
 # Read test pattern 0x5e
 sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-cbc-plain64-sha256-sha1
-qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-cbc-plain64-sha256-sha1
+qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-cbc-plain64-sha256-sha1
 read 10485760/10485760 bytes at offset 3298534883328
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)

@@ -2545,13 +2545,13 @@ Formatting 'TEST_DIR/luks-aes-256-cbc-plain64-sha256-sha1.img', fmt=luks size=43
 sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-cbc-plain64-sha256-sha1.img qiotest-145-aes-256-cbc-plain64-sha256-sha1
 # Write test pattern 0xa7
 sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-cbc-plain64-sha256-sha1
-qemu-io -c write -P 0xa7 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-cbc-plain64-sha256-sha1
+qemu-io -c write -P 0xa7 100M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-cbc-plain64-sha256-sha1
 wrote 10485760/10485760 bytes at offset 104857600
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 
 # Write test pattern 0x13
 sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-cbc-plain64-sha256-sha1
-qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-cbc-plain64-sha256-sha1
+qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-cbc-plain64-sha256-sha1
 wrote 10485760/10485760 bytes at offset 3298534883328
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)

@@ -2581,13 +2581,13 @@ wrote 10485760/10485760 bytes at offset 3298534883328
 sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-cbc-plain64-sha256-sha1.img qiotest-145-aes-256-cbc-plain64-sha256-sha1
 # Read test pattern 0x91
 sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-cbc-plain64-sha256-sha1
-qemu-io -c read -P 0x91 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-cbc-plain64-sha256-sha1
+qemu-io -c read -P 0x91 100M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-cbc-plain64-sha256-sha1
 read 10485760/10485760 bytes at offset 104857600
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 
 # Read test pattern 0x5e
 sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-cbc-plain64-sha256-sha1
-qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-cbc-plain64-sha256-sha1
+qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-cbc-plain64-sha256-sha1
 read 10485760/10485760 bytes at offset 3298534883328
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)

Signature · 1 line

—js

Kevin Wolf

author

2018-07-23 13:53 UTC #2 lore raw

Am 13.07.2018 um 20:12 hat John Snow geschrieben:

Quoted 29 lines · Kevin Wolf

Quoted 6 lines
The test case uses block devices with driver=file, which causes the test to fail after commit 230ff73904 added a deprecation warning for this. Fix the test case to use driver=host_device and update the reference output accordingly.
Signed-off-by Kevin Wolf <[email protected]>
149 [not run] requires password-less sudo access: sudo: a
password is required
Ah, this one hides from regression scripts quite well...
This test fails both before and after this patch for me, with
(quoted diff) +11 -0
+Traceback (most recent call last):
+  File "149", line 525, in <module>
+    test_once(config, qemu_img=False)
+  File "149", line 336, in test_once
+    cryptsetup_open(config)
+  File "149", line 200, in cryptsetup_open
+    cryptsetup(args, password)
+  File "149", line 124, in cryptsetup
+    raise Exception(msg)
+Exception: Device qiotest-145-twofish-128-xts-plain64-sha1 already exists.
+Command failed with code 17: File exists

Quoted 1 line

Am I missing some prerequisite, maybe?

Hm, sounds a bit like a failed first attempt that didn't clean up behind itself properly? Just guessing though.

Kevin

Daniel P. Berrangé

2018-07-23 13:55 UTC #3 lore raw

Quoted 30 lines · Kevin Wolf

Am 13.07.2018 um 20:12 hat John Snow geschrieben:
Quoted 29 lines · Kevin Wolf
Quoted 6 lines
The test case uses block devices with driver=file, which causes the test to fail after commit 230ff73904 added a deprecation warning for this. Fix the test case to use driver=host_device and update the reference output accordingly.
Signed-off-by Kevin Wolf <[email protected]>
149 [not run] requires password-less sudo access: sudo: a
password is required
Ah, this one hides from regression scripts quite well...
This test fails both before and after this patch for me, with
(quoted diff) +11 -0
+Traceback (most recent call last):
+  File "149", line 525, in <module>
+    test_once(config, qemu_img=False)
+  File "149", line 336, in test_once
+    cryptsetup_open(config)
+  File "149", line 200, in cryptsetup_open
+    cryptsetup(args, password)
+  File "149", line 124, in cryptsetup
+    raise Exception(msg)
+Exception: Device qiotest-145-twofish-128-xts-plain64-sha1 already exists.
+Command failed with code 17: File exists

Quoted 4 lines

Quoted 1 line
Am I missing some prerequisite, maybe?
Hm, sounds a bit like a failed first attempt that didn't clean up behind itself properly? Just guessing though.

Yeah, sounds like it failed badly enough that cleanup broke.

Can probably fix it by either rebooting, or the more nuanced:

cryptsetup luksClose qiotest-145-twofish-128-xts-plain64-sha1

Regards,
Daniel

Signature · 3 lines

|: https://berrange.com      -o-    https://www.flickr.com/photos/dberrange :|
|: https://libvirt.org         -o-            https://fstop138.berrange.com :|
|: https://entangle-photo.org    -o-    https://www.instagram.com/dberrange :|