Convert CONFIG_NAND_LPC32XX_SLC to Kconfig
Subsystems (2)
PATCH 1/1 Convert CONFIG_NAND_LPC32XX_SLC to Kconfig
This converts the following to Kconfig:
CONFIG_NAND_LPC32XX_SLC
Signed-off-by Adam Ford <[email protected]>
configs/devkit3250_defconfig +1 -0
@@ -34,6 +34,7 @@ CONFIG_DM_GPIO=y # CONFIG_MMC is not set CONFIG_MTD_NOR_FLASH=y CONFIG_NAND=y +CONFIG_NAND_LPC32XX_SLC=y CONFIG_SPL_NAND_SIMPLE=y CONFIG_PHYLIB=y CONFIG_PHY_ADDR_ENABLE=y
drivers/mtd/nand/Kconfig +5 -0
@@ -37,6 +37,11 @@ config NAND_DENALI_SPARE_AREA_SKIP_BYTES of OOB area before last ECC sector data starts. This is potentially used to preserve the bad block marker in the OOB area. +config NAND_LPC32XX_SLC + bool "Support LPC32XX_SLC controller" + help + Enable the LPC32XX SLC NAND controller. + config NAND_OMAP_GPMC bool "Support OMAP GPMC NAND controller" depends on ARCH_OMAP2PLUS
include/configs/devkit3250.h +0 -1
@@ -84,7 +84,6 @@/* * NAND controller */ -#define CONFIG_NAND_LPC32XX_SLC #define CONFIG_SYS_NAND_BASE SLC_NAND_BASE#define CONFIG_SYS_MAX_NAND_DEVICE 1#define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE }
scripts/config_whitelist.txt +0 -1
@@ -1381,7 +1381,6 @@ CONFIG_NAND_FSMC CONFIG_NAND_KIRKWOOD CONFIG_NAND_KMETER1 CONFIG_NAND_LPC32XX_MLC -CONFIG_NAND_LPC32XX_SLC CONFIG_NAND_MODE_REG CONFIG_NAND_MXC_V1_1 CONFIG_NAND_OMAP_ECCSCHEME
Signature · 1 line
2.17.1
configs/devkit3250_defconfig
Quoted 7 lines · Adam Ford
This converts the following to
Kconfig:
CONFIG_NAND_LPC32XX_SLCSigned-off-by Adam Ford <[email protected]>configs/devkit3250_defconfig +0
-0
Applied to u-boot/master, thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: not available URL: <http://lists.denx.de/pipermail/u-boot/attachments/20180723/952ecaaf/attachment.sig>