common: Log should depends on DM not be selected by DM
Subsystems (18)
PATCH v2 1/5 common: Log should depends on DM not be selected by DM
Better use depends on instead of select.
Signed-off-by Michal Simek <[email protected]>
Reviewed-by Tom Rini <[email protected]>
---
Changes in v2: None
I found this in connection to setup imply CMD_DM and it seems to not standard that it is selecting DM which is not used anywhere else.
--- common/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
common/Kconfig +1 -1
@@ -428,7 +428,7 @@ menu "Logging" config LOG bool "Enable logging support" - select DM + depends on DM help This enables support for logging of status and debug messages. These can be displayed on the console, recorded in a memory buffer, or
Signature · 1 line
1.9.1
PATCH v2 2/5 Kconfig: Replace spaces with tabs and missing newline
Trivial Kconfig cleanup. Use tabs instead of spaces and every Kconfig entry should be separated by newline.
Signed-off-by Michal Simek <[email protected]>
---
Changes in v2:
- new patch - not to confuse script
arch/arm/Kconfig | 10 +++++----- arch/arm/mach-imx/mx6/Kconfig | 14 +++++++------- cmd/Kconfig | 5 +++-- 3 files changed, 15 insertions(+), 14 deletions(-)
arch/arm/Kconfig +5 -5
@@ -169,7 +169,7 @@ config ARM_ERRATA_833471 bool config ARM_ERRATA_845369 - bool + bool config ARM_ERRATA_852421 bool
@@ -683,7 +683,7 @@ config ARCH_MX31 select CPU_ARM1136 config ARCH_MX7ULP - bool "NXP MX7ULP" + bool "NXP MX7ULP" select CPU_V7A select ROM_UNIFIED_SECTIONS imply MXC_GPIO
@@ -709,7 +709,7 @@ config ARCH_MX6 if ARCH_MX6 config SPL_LDSCRIPT - default "arch/arm/mach-omap2/u-boot-spl.lds" + default "arch/arm/mach-omap2/u-boot-spl.lds" endif config ARCH_MX5
@@ -1486,8 +1486,8 @@ source "arch/arm/Kconfig.debug" endmenu config SPL_LDSCRIPT - default "arch/arm/cpu/arm926ejs/mxs/u-boot-spl.lds" if (ARCH_MX23 || ARCH_MX28) && !SPL_FRAMEWORK - default "arch/arm/cpu/arm1136/u-boot-spl.lds" if CPU_ARM1136 + default "arch/arm/cpu/arm926ejs/mxs/u-boot-spl.lds" if (ARCH_MX23 || ARCH_MX28) && !SPL_FRAMEWORK + default "arch/arm/cpu/arm1136/u-boot-spl.lds" if CPU_ARM1136 default "arch/arm/cpu/armv8/u-boot-spl.lds" if ARM64
arch/arm/mach-imx/mx6/Kconfig +7 -7
@@ -293,11 +293,11 @@ config TARGET_MX6SLEVK select SUPPORT_SPL config TARGET_MX6SLLEVK - bool "mx6sll evk" + bool "mx6sll evk" select BOARD_LATE_INIT - select MX6SLL - select DM - select DM_THERMAL + select MX6SLL + select DM + select DM_THERMAL config TARGET_MX6SXSABRESD bool "mx6sxsabresd"
@@ -309,11 +309,11 @@ config TARGET_MX6SXSABRESD select BOARD_EARLY_INIT_F config TARGET_MX6SXSABREAUTO - bool "mx6sxsabreauto" + bool "mx6sxsabreauto" select BOARD_LATE_INIT select MX6SX - select DM - select DM_THERMAL + select DM + select DM_THERMAL select BOARD_EARLY_INIT_F config TARGET_MX6UL_9X9_EVK
cmd/Kconfig +3 -2
@@ -1012,11 +1012,12 @@ config CMD_USB_SDP help Enables the command "sdp" which is used to have U-Boot emulating the Serial Download Protocol (SDP) via USB. + config CMD_ROCKUSB bool "rockusb" depends on USB_FUNCTION_ROCKUSB help - Rockusb protocol is widely used by Rockchip SoC based devices. It can + Rockusb protocol is widely used by Rockchip SoC based devices. It can read/write info, image to/from devices. This enable rockusb command support to communication with rockusb device. for more detail about this command, please read doc/README.rockusb.
@@ -1489,7 +1490,7 @@ config CMD_BLOB the original data. Sub-commands: - blob enc - encapsulating data as a cryptgraphic blob + blob enc - encapsulating data as a cryptgraphic blob blob dec - decapsulating cryptgraphic blob to get the data Syntax:
Signature · 1 line
1.9.1
PATCH v2 2/5 Kconfig: Replace spaces with tabs and missing newline
Quoted 4 lines · Michal Simek
Trivial
Kconfigcleanup. Use tabs instead of spaces and everyKconfigentry should be separated by newline.Signed-off-by Michal Simek <[email protected]>
Reviewed-by Tom Rini <[email protected]>
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: not available URL: <http://lists.denx.de/pipermail/u-boot/attachments/20180723/f95e0013/attachment.sig>
PATCH v2 2/5 Kconfig: Replace spaces with tabs and missing newline
In reply to Michal SimekQuoted 4 lines · Michal Simek
Trivial
Kconfigcleanup. Use tabs instead of spaces and everyKconfigentry should be separated by newline.Signed-off-by Michal Simek <[email protected]>
Reviewed-by Joe Hershberger <[email protected]>
PATCH v2 2/5 Kconfig: Replace spaces with tabs and missing newline
In reply to Michal SimekQuoted 6 lines · Michal Simek
Trivial
Kconfigcleanup. Use tabs instead of spaces and everyKconfigentry should be separated by newline.Signed-off-by Michal Simek <[email protected]>Reviewed-by Tom Rini <[email protected]>Reviewed-by Joe Hershberger <[email protected]>
Applied to u-boot/master, thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: not available URL: <http://lists.denx.de/pipermail/u-boot/attachments/20180730/58f442b2/attachment.sig>
PATCH v2 3/5 Kconfig: Sort bool, default, select and imply options
In reply to Michal SimekFix Kconfig bool, default, select and imply options to be alphabetically sorted.
Signed-off-by Michal Simek <[email protected]>
---
Changes in v2:
- new patch
I have sorted only Kconfig which I need for the next patch.
--- arch/Kconfig | 54 +++++----- arch/arm/Kconfig | 206 ++++++++++++++++++------------------- arch/arm/mach-at91/Kconfig | 60 +++++------ arch/arm/mach-imx/mx5/Kconfig | 12 +-- arch/arm/mach-imx/mx6/Kconfig | 158 ++++++++++++++-------------- arch/arm/mach-imx/mx7/Kconfig | 18 ++-- arch/arm/mach-omap2/am33xx/Kconfig | 46 ++++----- arch/arm/mach-omap2/omap3/Kconfig | 20 ++-- arch/arm/mach-rmobile/Kconfig.32 | 14 +-- arch/arm/mach-tegra/Kconfig | 8 +- arch/microblaze/Kconfig | 4 +- arch/mips/Kconfig | 50 ++++----- arch/powerpc/cpu/mpc83xx/Kconfig | 6 +- cmd/Kconfig | 14 +-- 14 files changed, 335 insertions(+), 335 deletions(-)
arch/Kconfig +27 -27
@@ -10,12 +10,12 @@ choice config ARC bool "ARC architecture" - select HAVE_PRIVATE_LIBGCC - select SUPPORT_OF_CONTROL select ARCH_EARLY_INIT_R + select ARC_TIMER select CLK + select HAVE_PRIVATE_LIBGCC + select SUPPORT_OF_CONTROL select TIMER - select ARC_TIMER config ARM bool "ARM architecture"
@@ -46,10 +46,10 @@ config NDS32 config NIOS2 bool "Nios II architecture" - select SUPPORT_OF_CONTROL - select OF_CONTROL - select DM select CPU + select DM + select OF_CONTROL + select SUPPORT_OF_CONTROL config PPC bool "PowerPC architecture"
@@ -65,30 +65,30 @@ config RISCV config SANDBOX bool "Sandbox" select BOARD_LATE_INIT - select SUPPORT_OF_CONTROL select DM + select DM_GPIO + select DM_I2C select DM_KEYBOARD - select DM_SPI_FLASH + select DM_MMC select DM_SERIAL - select DM_I2C select DM_SPI - select DM_GPIO - select DM_MMC + select DM_SPI_FLASH select HAVE_BLOCK_DEVICE - select SPI select LZO + select SPI + select SUPPORT_OF_CONTROL imply CMD_GETTIME imply CMD_HASH imply CMD_IO imply CMD_IOTRACE imply CMD_LZMADEC + imply CMD_SATA + imply CMD_SF_TEST imply CRC32_VERIFY imply FAT_WRITE imply HASH_VERIFY imply LZMA imply SCSI - imply CMD_SATA - imply CMD_SF_TEST config SH bool "SuperH architecture"
@@ -97,39 +97,39 @@ config SH config X86 bool "x86 architecture" select CREATE_ARCH_SYMLINK - select HAVE_PRIVATE_LIBGCC - select USE_PRIVATE_LIBGCC - select SUPPORT_OF_CONTROL - select OF_CONTROL select DM select DM_PCI + select HAVE_PRIVATE_LIBGCC + select OF_CONTROL select PCI + select SUPPORT_OF_CONTROL select TIMER + select USE_PRIVATE_LIBGCC select X86_TSC_TIMER imply BLK + imply CMD_FPGA_LOADMK + imply CMD_GETTIME + imply CMD_IO + imply CMD_IRQ + imply CMD_PCI + imply CMD_SF_TEST + imply CMD_ZBOOT imply DM_ETH imply DM_GPIO imply DM_KEYBOARD imply DM_MMC imply DM_RTC - imply DM_SERIAL imply DM_SCSI + imply DM_SERIAL imply DM_SPI imply DM_SPI_FLASH imply DM_USB imply DM_VIDEO imply SYSRESET imply SYSRESET_X86 - imply CMD_FPGA_LOADMK - imply CMD_GETTIME - imply CMD_IO - imply CMD_IRQ - imply CMD_PCI - imply CMD_SF_TEST - imply CMD_ZBOOT - imply USB_HOST_ETHER imply USB_ETHER_ASIX imply USB_ETHER_SMSC95XX + imply USB_HOST_ETHER config XTENSA bool "Xtensa architecture"
arch/arm/Kconfig +103 -103
624 lines not on this page · raw message
arch/arm/mach-at91/Kconfig +30 -30
171 lines not on this page · raw message
arch/arm/mach-imx/mx5/Kconfig +6 -6
@@ -1,14 +1,14 @@ if ARCH_MX5 config MX5 - select GPT_TIMER bool default y + select GPT_TIMER config MX51 bool - select SYS_FSL_ERRATUM_ESDHC_A001 select ARM_CORTEX_A8_CVE_2017_5715 + select SYS_FSL_ERRATUM_ESDHC_A001 config MX53 bool
@@ -21,13 +21,13 @@ choice config TARGET_KP_IMX53 bool "Support K+P imx53 board" select BOARD_LATE_INIT - select MX53 select DM - select DM_SERIAL select DM_ETH - select DM_I2C select DM_GPIO + select DM_I2C select DM_PMIC + select DM_SERIAL + select MX53 config TARGET_MX51EVK bool "Support mx51evk"
@@ -41,9 +41,9 @@ config TARGET_MX53ARD config TARGET_MX53CX9020 bool "Support CX9020" select BOARD_LATE_INIT - select MX53 select DM select DM_SERIAL + select MX53 config TARGET_MX53EVK bool "Support mx53evk"
arch/arm/mach-imx/mx6/Kconfig +79 -79
448 lines not on this page · raw message
arch/arm/mach-imx/mx7/Kconfig +9 -9
@@ -2,19 +2,19 @@ if ARCH_MX7 config MX7 bool + default y + select ARCH_SUPPORT_PSCI + select CPU_V7_HAS_NONSEC + select CPU_V7_HAS_VIRT select ROM_UNIFIED_SECTIONS select SYSCOUNTER_TIMER - select CPU_V7_HAS_VIRT - select CPU_V7_HAS_NONSEC - select ARCH_SUPPORT_PSCI imply CMD_FUSE - default y config MX7D + bool select HAS_CAAM select ROM_UNIFIED_SECTIONS imply CMD_FUSE - bool choice prompt "MX7 board select"
@@ -22,31 +22,31 @@ choice config TARGET_CL_SOM_IMX7 bool "CL-SOM-iMX7" - select MX7D select DM select DM_THERMAL + select MX7D select SUPPORT_SPL config TARGET_MX7DSABRESD bool "mx7dsabresd" select BOARD_LATE_INIT - select MX7D select DM select DM_THERMAL + select MX7D config TARGET_PICO_IMX7D bool "pico-imx7d" select BOARD_LATE_INIT - select MX7D select DM select DM_THERMAL + select MX7D config TARGET_WARP7 bool "warp7" select BOARD_LATE_INIT - select MX7D select DM select DM_THERMAL + select MX7D config TARGET_COLIBRI_IMX7 bool "Support Colibri iMX7S/iMX7D modules"
arch/arm/mach-omap2/am33xx/Kconfig +23 -23
167 lines not on this page · raw message
arch/arm/mach-omap2/omap3/Kconfig +10 -10
@@ -23,10 +23,10 @@ choice config TARGET_AM3517_EVM bool "AM3517 EVM" select DM - select DM_SERIAL select DM_GPIO select DM_I2C select DM_MMC + select DM_SERIAL config TARGET_MT_VENTOUX bool "TeeJet Mt.Ventoux"
@@ -36,8 +36,8 @@ config TARGET_MT_VENTOUX config TARGET_OMAP3_BEAGLE bool "TI OMAP3 BeagleBoard" select DM - select DM_SERIAL select DM_GPIO + select DM_SERIAL select OMAP3_GPIO_5 select OMAP3_GPIO_6
@@ -56,21 +56,21 @@ config TARGET_CM_T3517 config TARGET_DEVKIT8000 bool "TimLL OMAP3 Devkit8000" select DM - select DM_SERIAL select DM_GPIO + select DM_SERIAL config TARGET_OMAP3_EVM bool "TI OMAP3 EVM" select DM - select DM_SERIAL select DM_GPIO + select DM_SERIAL select OMAP3_GPIO_3 config TARGET_OMAP3_IGEP00X0 bool "IGEP" select DM - select DM_SERIAL select DM_GPIO + select DM_SERIAL select OMAP3_GPIO_3 select OMAP3_GPIO_5 select OMAP3_GPIO_6
@@ -78,8 +78,8 @@ config TARGET_OMAP3_IGEP00X0 config TARGET_OMAP3_OVERO bool "OMAP35xx Gumstix Overo" select DM - select DM_SERIAL select DM_GPIO + select DM_SERIAL select OMAP3_GPIO_2 select OMAP3_GPIO_3 select OMAP3_GPIO_4
@@ -89,8 +89,8 @@ config TARGET_OMAP3_OVERO config TARGET_OMAP3_ZOOM1 bool "TI Zoom1" select DM - select DM_SERIAL select DM_GPIO + select DM_SERIAL config TARGET_AM3517_CRANE bool "am3517_crane"
@@ -118,8 +118,8 @@ config TARGET_OMAP3_LOGIC bool "OMAP3 Logic" select BOARD_LATE_INIT select DM - select DM_SERIAL select DM_GPIO + select DM_SERIAL select OMAP3_GPIO_3 select OMAP3_GPIO_4 select OMAP3_GPIO_6
@@ -143,14 +143,14 @@ config TARGET_TWISTER config TARGET_OMAP3_CAIRO bool "QUIPOS CAIRO" select DM - select DM_SERIAL select DM_GPIO + select DM_SERIAL config TARGET_SNIPER bool "LG Optimus Black" select DM - select DM_SERIAL select DM_GPIO + select DM_SERIAL select OMAP3_GPIO_2 select OMAP3_GPIO_3 select OMAP3_GPIO_4
arch/arm/mach-rmobile/Kconfig.32 +7 -7
@@ -47,25 +47,25 @@ config TARGET_GOSE bool "Gose board" select DM select DM_SERIAL + select SPL_TINY_MEMSET select SUPPORT_SPL select USE_TINY_PRINTF - select SPL_TINY_MEMSET config TARGET_KOELSCH bool "Koelsch board" select DM select DM_SERIAL + select SPL_TINY_MEMSET select SUPPORT_SPL select USE_TINY_PRINTF - select SPL_TINY_MEMSET config TARGET_LAGER bool "Lager board" select DM select DM_SERIAL + select SPL_TINY_MEMSET select SUPPORT_SPL select USE_TINY_PRINTF - select SPL_TINY_MEMSET config TARGET_KZM9G bool "KZM9D board"
@@ -74,33 +74,33 @@ config TARGET_ALT bool "Alt board" select DM select DM_SERIAL + select SPL_TINY_MEMSET select SUPPORT_SPL select USE_TINY_PRINTF - select SPL_TINY_MEMSET config TARGET_SILK bool "Silk board" select DM select DM_SERIAL + select SPL_TINY_MEMSET select SUPPORT_SPL select USE_TINY_PRINTF - select SPL_TINY_MEMSET config TARGET_PORTER bool "Porter board" select DM select DM_SERIAL + select SPL_TINY_MEMSET select SUPPORT_SPL select USE_TINY_PRINTF - select SPL_TINY_MEMSET config TARGET_STOUT bool "Stout board" select DM select DM_SERIAL + select SPL_TINY_MEMSET select SUPPORT_SPL select USE_TINY_PRINTF - select SPL_TINY_MEMSET endchoice
arch/arm/mach-tegra/Kconfig +4 -4
@@ -22,6 +22,8 @@ config TEGRA_IVC config TEGRA_COMMON bool "Tegra common options" + select BINMAN + select BOARD_EARLY_INIT_F select CLK select DM select DM_ETH
@@ -35,11 +37,9 @@ config TEGRA_COMMON select DM_SPI select DM_SPI_FLASH select MISC - select SPI select OF_CONTROL + select SPI select VIDCONSOLE_AS_LCD if DM_VIDEO - select BOARD_EARLY_INIT_F - select BINMAN imply CRC32_VERIFY config TEGRA_NO_BPMP
@@ -98,8 +98,8 @@ config TEGRA124 config TEGRA210 bool "Tegra210 family" - select TEGRA_GPIO select TEGRA_ARMV8_COMMON + select TEGRA_GPIO select TEGRA_NO_BPMP config TEGRA186
arch/microblaze/Kconfig +2 -2
@@ -11,10 +11,10 @@ choice config TARGET_MICROBLAZE_GENERIC bool "Support microblaze-generic" select BOARD_LATE_INIT - select SUPPORT_SPL - select OF_CONTROL select DM select DM_SERIAL + select OF_CONTROL + select SUPPORT_SPL select SYSRESET endchoice
arch/mips/Kconfig +25 -25
136 lines not on this page · raw message
arch/powerpc/cpu/mpc83xx/Kconfig +3 -3
@@ -26,8 +26,8 @@ config TARGET_MPC8308RDB config TARGET_MPC8313ERDB bool "Support MPC8313ERDB" - select SUPPORT_SPL select BOARD_EARLY_INIT_F + select SUPPORT_SPL config TARGET_MPC8315ERDB bool "Support MPC8315ERDB"
@@ -42,10 +42,10 @@ config TARGET_MPC832XEMDS config TARGET_MPC8349EMDS bool "Support MPC8349EMDS" + select BOARD_EARLY_INIT_F select SYS_FSL_DDR - select SYS_FSL_HAS_DDR2 select SYS_FSL_DDR_BE - select BOARD_EARLY_INIT_F + select SYS_FSL_HAS_DDR2 config TARGET_MPC8349ITX bool "Support MPC8349ITX"
cmd/Kconfig +7 -7
@@ -152,8 +152,8 @@ config CMD_BDI config CMD_CONFIG bool "config" - select BUILD_BIN2C default SANDBOX + select BUILD_BIN2C help Print ".config" contents.
@@ -429,8 +429,8 @@ config CMD_BINOP config CMD_CRC32 bool "crc32" - select HASH default y + select HASH help Compute CRC32.
@@ -737,9 +737,9 @@ config CMD_GPIO config CMD_GPT bool "GPT (GUID Partition Table) command" - select PARTITION_UUIDS select EFI_PARTITION select HAVE_BLOCK_DEVICE + select PARTITION_UUIDS imply RANDOM_UUID help Enable the 'gpt' command to ready and write GPT style partition
@@ -899,8 +899,8 @@ config CMD_ONENAND config CMD_PART bool "part" - select PARTITION_UUIDS select HAVE_BLOCK_DEVICE + select PARTITION_UUIDS help Read and display information about the partition table on various media.
@@ -1797,10 +1797,10 @@ endmenu config CMD_UBI tristate "Enable UBI - Unsorted block images commands" + default y if NAND_SUNXI + select CMD_MTDPARTS select CRC32 select MTD_UBI - select CMD_MTDPARTS - default y if NAND_SUNXI help UBI is a software layer above MTD layer which admits use of LVM-like logical volumes on top of MTD devices, hides some complexities of
@@ -1812,9 +1812,9 @@ config CMD_UBI config CMD_UBIFS tristate "Enable UBIFS - Unsorted block images filesystem commands" depends on CMD_UBI + default y if CMD_UBI select CRC32 select LZO - default y if CMD_UBI help UBIFS is a file system for flash devices which works on top of UBI.
Signature · 1 line
1.9.1
PATCH v2 3/5 Kconfig: Sort bool, default, select and imply options
Quoted 4 lines · Michal Simek
Fix
Kconfigbool, default, select and imply options to be alphabetically sorted.Signed-off-by Michal Simek <[email protected]>
Reviewed-by Tom Rini <[email protected]>
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: not available URL: <http://lists.denx.de/pipermail/u-boot/attachments/20180723/9c29e192/attachment.sig>
PATCH v2 3/5 Kconfig: Sort bool, default, select and imply options
In reply to Michal SimekQuoted 5 lines · Michal Simek
Fix
Kconfigbool, default, select and imply options to be alphabetically sorted.Signed-off-by Michal Simek <[email protected]>Reviewed-by Tom Rini <[email protected]>
Applied to u-boot/master, thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: not available URL: <http://lists.denx.de/pipermail/u-boot/attachments/20180730/2f71af57/attachment.sig>
PATCH v2 4/5 dm: Change CMD_DM enabling
In reply to Michal SimekCMD_DM is used for debug purpose and it shouldn't be enabled by default via Kconfig. Unfortunately this is in the tree for quite a long time that's why solution is to use imply DM for all targets which are enabling DM.
Signed-off-by Michal Simek <[email protected]>
---
Changes in v2:
- sort them
Based on this discussion:
https://lists.denx.de/pipermail/u-boot/2018-July/334952.html
Done by:
for i in git grep "select DM" | grep -v DM_ | cut -d ':' -f 1 | sort | uniq; do
sed -i 's/select DM$/select DM\n\timply CMD_DM/g' $i;
done
And sort:
And checked by
for i in ls configs/*; do
NAME=`basename $i`; echo $NAME; make $NAME; make savedefconfig; cp defconfig $i;
done
--- arch/Kconfig | 3 +++ arch/arm/Kconfig | 25 +++++++++++++++++++++++++ arch/arm/mach-at91/Kconfig | 6 ++++++ arch/arm/mach-imx/mx5/Kconfig | 2 ++ arch/arm/mach-imx/mx6/Kconfig | 25 +++++++++++++++++++++++++ arch/arm/mach-imx/mx7/Kconfig | 5 +++++ arch/arm/mach-meson/Kconfig | 2 ++ arch/arm/mach-omap2/am33xx/Kconfig | 18 ++++++++++++++++++ arch/arm/mach-omap2/omap3/Kconfig | 10 ++++++++++ arch/arm/mach-rmobile/Kconfig.32 | 8 ++++++++ arch/arm/mach-tegra/Kconfig | 1 + arch/microblaze/Kconfig | 1 + arch/mips/Kconfig | 6 ++++++ arch/powerpc/cpu/mpc83xx/Kconfig | 1 + cmd/Kconfig | 1 - 15 files changed, 113 insertions(+), 1 deletion(-)
arch/Kconfig +3 -0
@@ -50,6 +50,7 @@ config NIOS2 select DM select OF_CONTROL select SUPPORT_OF_CONTROL + imply CMD_DM config PPC bool "PowerPC architecture"
@@ -77,6 +78,7 @@ config SANDBOX select LZO select SPI select SUPPORT_OF_CONTROL + imply CMD_DM imply CMD_GETTIME imply CMD_HASH imply CMD_IO
@@ -107,6 +109,7 @@ config X86 select USE_PRIVATE_LIBGCC select X86_TSC_TIMER imply BLK + imply CMD_DM imply CMD_FPGA_LOADMK imply CMD_GETTIME imply CMD_IO
arch/arm/Kconfig +25 -0
@@ -441,6 +441,7 @@ config ARCH_MVEBU select OF_CONTROL select OF_SEPARATE select SPI + imply CMD_DM config TARGET_DEVKIT3250 bool "Support devkit3250"
@@ -499,6 +500,7 @@ config TARGET_STV0991 select PL01X_SERIAL select SPI select SPI_FLASH + imply CMD_DM config TARGET_X600 bool "Support x600"
@@ -533,6 +535,7 @@ config ARCH_BCM283X select OF_CONTROL select PL01X_SERIAL select SERIAL_SEARCH_ALL + imply CMD_DM imply FAT_WRITE config TARGET_VEXPRESS_CA15_TC2
@@ -548,6 +551,7 @@ config ARCH_BCMSTB select DM select OF_CONTROL select OF_PRIOR_STAGE + imply CMD_DM help This enables support for Broadcom ARM-based set-top box chipsets, including the 7445 family of chips.
@@ -607,6 +611,7 @@ config ARCH_EXYNOS select DM_SPI select DM_SPI_FLASH select SPI + imply CMD_DM imply FAT_WRITE config ARCH_S5PC1XX
@@ -616,6 +621,7 @@ config ARCH_S5PC1XX select DM_GPIO select DM_I2C select DM_SERIAL + imply CMD_DM config ARCH_HIGHBANK bool "Calxeda Highbank"
@@ -627,6 +633,7 @@ config ARCH_INTEGRATOR select DM select DM_SERIAL select PL01X_SERIAL + imply CMD_DM config ARCH_KEYSTONE bool "TI Keystone"
@@ -660,6 +667,7 @@ config ARCH_MX8M select ARM64 select DM select SUPPORT_SPL + imply CMD_DM config ARCH_MX23 bool "NXP i.MX23 family"
@@ -724,6 +732,7 @@ config ARCH_OWL select DM select DM_SERIAL select OF_CONTROL + imply CMD_DM config ARCH_QEMU bool "QEMU Virtual Platform"
@@ -731,12 +740,14 @@ config ARCH_QEMU select DM_SERIAL select OF_CONTROL select PL01X_SERIAL + imply CMD_DM config ARCH_RMOBILE bool "Renesas ARM SoCs" select BOARD_EARLY_INIT_F select DM select DM_SERIAL + imply CMD_DM imply FAT_WRITE imply SYS_THUMB_BUILD
@@ -756,6 +767,7 @@ config ARCH_SNAPDRAGON select OF_SEPARATE select SMEM select SPMI + imply CMD_DM config ARCH_SOCFPGA bool "Altera SOCFPGA family"
@@ -784,6 +796,7 @@ config ARCH_SOCFPGA select SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION_TYPE select SYS_NS16550 select SYS_THUMB_BUILD if TARGET_SOCFPGA_GEN5 || TARGET_SOCFPGA_ARRIA10 + imply CMD_DM imply CMD_MTDPARTS imply CRC32_VERIFY imply DM_SPI
@@ -816,6 +829,7 @@ config ARCH_SUNXI select USB_KEYBOARD if DISTRO_DEFAULTS select USB_STORAGE if DISTRO_DEFAULTS select USE_TINY_PRINTF + imply CMD_DM imply CMD_GPT imply DISTRO_DEFAULTS imply FAT_WRITE
@@ -861,6 +875,7 @@ config ARCH_ZYNQ select SUPPORT_SPL imply ARCH_EARLY_INIT_R imply CMD_CLK + imply CMD_DM imply CMD_SPL imply FAT_WRITE
@@ -871,6 +886,7 @@ config ARCH_ZYNQMP_R5 select DM select DM_SERIAL select OF_CONTROL + imply CMD_DM config ARCH_ZYNQMP bool "Xilinx ZynqMP based platform"
@@ -884,6 +900,7 @@ config ARCH_ZYNQMP select SPL_BOARD_INIT if SPL select SPL_CLK if SPL select SUPPORT_SPL + imply CMD_DM imply FAT_WRITE config TEGRA
@@ -1010,6 +1027,7 @@ config TARGET_HIKEY select OF_CONTROL select PL01X_SERIAL select SPECIFY_CONSOLE_INDEX + imply CMD_DM help Support for HiKey 96boards platform. It features a HI6220 SoC, with 8xA53 CPU, mali450 gpu, and 1GB RAM.
@@ -1022,6 +1040,7 @@ config TARGET_POPLAR select DM_USB select OF_CONTROL select PL01X_SERIAL + imply CMD_DM help Support for Poplar 96boards EE platform. It features a HI3798cv200 SoC, with 4xA53 CPU, 1GB RAM and the high performance Mali T720 GPU
@@ -1233,6 +1252,7 @@ config ARCH_UNIPHIER select SPL_OF_CONTROL if SPL select SPL_PINCTRL if SPL select SUPPORT_SPL + imply CMD_DM imply FAT_WRITE help Support for UniPhier SoC family developed by Socionext Inc.
@@ -1244,6 +1264,7 @@ config STM32 select DM select DM_SERIAL select SYS_THUMB_BUILD + imply CMD_DM config ARCH_STI bool "Support STMicrolectronics SoCs"
@@ -1253,6 +1274,7 @@ config ARCH_STI select DM_MMC select DM_RESET select DM_SERIAL + imply CMD_DM help Support for STMicroelectronics STiH407/10 SoC family. This SoC is used on Linaro 96Board STiH410-B2260
@@ -1275,6 +1297,7 @@ config ARCH_STM32MP select SYSCON select SYSRESET select SYS_THUMB_BUILD + imply CMD_DM help Support for STM32MP SoC family developed by STMicroelectronics, MPUs based on ARM cortex A core
@@ -1302,6 +1325,7 @@ config ARCH_ROCKCHIP select SYS_MALLOC_F select SYS_THUMB_BUILD if !ARM64 imply ADC + imply CMD_DM imply DISTRO_DEFAULTS imply FAT_WRITE imply SARADC_ROCKCHIP
@@ -1321,6 +1345,7 @@ config ARCH_ASPEED bool "Support Aspeed SoCs" select DM select OF_CONTROL + imply CMD_DM endchoice
arch/arm/mach-at91/Kconfig +6 -0
@@ -78,6 +78,7 @@ config TARGET_SNAPPER9260 select DM select DM_GPIO select DM_SERIAL + imply CMD_DM config TARGET_GURNARD bool "Support gurnard"
@@ -89,6 +90,7 @@ config TARGET_GURNARD select DM_SERIAL select DM_SPI select SPI + imply CMD_DM config TARGET_AT91SAM9261EK bool "Atmel at91sam9261 reference board"
@@ -209,6 +211,7 @@ config TARGET_CORVUS select DM_GPIO select DM_SERIAL select SUPPORT_SPL + imply CMD_DM config TARGET_TAURUS bool "Support taurus"
@@ -220,6 +223,7 @@ config TARGET_TAURUS select DM_SPI select SPI select SUPPORT_SPL + imply CMD_DM config TARGET_SMARTWEB bool "Support smartweb"
@@ -229,6 +233,7 @@ config TARGET_SMARTWEB select DM_GPIO select DM_SERIAL select SUPPORT_SPL + imply CMD_DM config TARGET_VINCO bool "Support VINCO"
@@ -237,6 +242,7 @@ config TARGET_VINCO select SAMA5D4 select SPI select SUPPORT_SPL + imply CMD_DM config TARGET_WB45N bool "Support Laird WB45N"
arch/arm/mach-imx/mx5/Kconfig +2 -0
@@ -28,6 +28,7 @@ config TARGET_KP_IMX53 select DM_PMIC select DM_SERIAL select MX53 + imply CMD_DM config TARGET_MX51EVK bool "Support mx51evk"
@@ -44,6 +45,7 @@ config TARGET_MX53CX9020 select DM select DM_SERIAL select MX53 + imply CMD_DM config TARGET_MX53EVK bool "Support mx53evk"
arch/arm/mach-imx/mx6/Kconfig +25 -0
@@ -64,6 +64,7 @@ config MX6UL_LITESOM select DM_THERMAL select MX6UL select SUPPORT_SPL + imply CMD_DM config MX6UL_OPOS6UL bool
@@ -78,6 +79,7 @@ config MX6UL_OPOS6UL select SPL_PINCTRL if SPL select SPL_SEPARATE_BSS if SPL select SUPPORT_SPL + imply CMD_DM config MX6ULL bool
@@ -110,6 +112,7 @@ config TARGET_APALIS_IMX6 select DM_SERIAL select DM_THERMAL select SUPPORT_SPL + imply CMD_DM imply CMD_SATA config TARGET_ARISTAINETOS
@@ -130,6 +133,7 @@ config TARGET_CGTQMX6EVAL select DM_THERMAL select MX6QDL select SUPPORT_SPL + imply CMD_DM config TARGET_CM_FX6 bool "CM-FX6"
@@ -139,6 +143,7 @@ config TARGET_CM_FX6 select DM_SERIAL select MX6QDL select SUPPORT_SPL + imply CMD_DM config TARGET_COLIBRI_IMX6 bool "Toradex Colibri iMX6 board"
@@ -147,6 +152,7 @@ config TARGET_COLIBRI_IMX6 select DM_SERIAL select DM_THERMAL select SUPPORT_SPL + imply CMD_DM config TARGET_DHCOMIMX6 bool "dh_imx6"
@@ -156,6 +162,7 @@ config TARGET_DHCOMIMX6 select DM_THERMAL select MX6QDL select SUPPORT_SPL + imply CMD_DM imply CMD_SPL config TARGET_DISPLAY5
@@ -163,6 +170,7 @@ config TARGET_DISPLAY5 select DM select DM_SERIAL select SUPPORT_SPL + imply CMD_DM config TARGET_EMBESTMX6BOARDS bool "embestmx6boards"
@@ -208,6 +216,7 @@ config TARGET_MX6LOGICPD select DM_PMIC select DM_REGULATOR select OF_CONTROL + imply CMD_DM config TARGET_MX6MEMCAL bool "mx6memcal"
@@ -250,6 +259,7 @@ config TARGET_MX6DL_MAMOJ select SPL_USB_SDP_SUPPORT if SPL select SPL_WATCHDOG_SUPPORT if SPL select SUPPORT_SPL + imply CMD_DM config TARGET_MX6Q_ENGICAM bool "Support Engicam i.Core(RQS)"
@@ -268,6 +278,7 @@ config TARGET_MX6Q_ENGICAM select SPL_PINCTRL if SPL select SPL_SEPARATE_BSS if SPL select SUPPORT_SPL + imply CMD_DM config TARGET_MX6SABREAUTO bool "mx6sabreauto"
@@ -277,6 +288,7 @@ config TARGET_MX6SABREAUTO select DM_THERMAL select MX6QDL select SUPPORT_SPL + imply CMD_DM config TARGET_MX6SABRESD bool "mx6sabresd"
@@ -286,6 +298,7 @@ config TARGET_MX6SABRESD select DM_THERMAL select MX6QDL select SUPPORT_SPL + imply CMD_DM config TARGET_MX6SLEVK bool "mx6slevk"
@@ -298,6 +311,7 @@ config TARGET_MX6SLLEVK select DM select DM_THERMAL select MX6SLL + imply CMD_DM config TARGET_MX6SXSABRESD bool "mx6sxsabresd"
@@ -315,6 +329,7 @@ config TARGET_MX6SXSABREAUTO select DM select DM_THERMAL select MX6SX + imply CMD_DM config TARGET_MX6UL_9X9_EVK bool "mx6ul_9x9_evk"
@@ -323,6 +338,7 @@ config TARGET_MX6UL_9X9_EVK select DM_THERMAL select MX6UL select SUPPORT_SPL + imply CMD_DM config TARGET_MX6UL_14X14_EVK bool "mx6ul_14x14_evk"
@@ -331,6 +347,7 @@ config TARGET_MX6UL_14X14_EVK select DM_THERMAL select MX6UL select SUPPORT_SPL + imply CMD_DM config TARGET_MX6UL_ENGICAM bool "Support Engicam GEAM6UL/Is.IoT"
@@ -348,6 +365,7 @@ config TARGET_MX6UL_ENGICAM select SPL_PINCTRL if SPL select SPL_SEPARATE_BSS if SPL select SUPPORT_SPL + imply CMD_DM config TARGET_MX6ULL_14X14_EVK bool "Support mx6ull_14x14_evk"
@@ -355,6 +373,7 @@ config TARGET_MX6ULL_14X14_EVK select DM select DM_THERMAL select MX6ULL + imply CMD_DM config TARGET_NITROGEN6X bool "nitrogen6x"
@@ -421,6 +440,7 @@ config TARGET_KP_IMX6Q_TPC select DM_THERMAL select MX6QDL select SUPPORT_SPL + imply CMD_DM imply CMD_SPL config TARGET_TQMA6
@@ -440,6 +460,7 @@ config TARGET_UDOO_NEO select DM_THERMAL select MX6SX select SUPPORT_SPL + imply CMD_DM config TARGET_SAMTEC_VINING_2000 bool "samtec VIN|ING 2000"
@@ -447,6 +468,7 @@ config TARGET_SAMTEC_VINING_2000 select DM select DM_THERMAL select MX6SX + imply CMD_DM config TARGET_WANDBOARD bool "wandboard"
@@ -466,6 +488,7 @@ config TARGET_XPRESS select DM_THERMAL select MX6UL select SUPPORT_SPL + imply CMD_DM config TARGET_ZC5202 bool "zc5202"
@@ -473,6 +496,7 @@ config TARGET_ZC5202 select DM select DM_THERMAL select SUPPORT_SPL + imply CMD_DM config TARGET_ZC5601 bool "zc5601"
@@ -480,6 +504,7 @@ config TARGET_ZC5601 select DM select DM_THERMAL select SUPPORT_SPL + imply CMD_DM endchoice
arch/arm/mach-imx/mx7/Kconfig +5 -0
@@ -26,6 +26,7 @@ config TARGET_CL_SOM_IMX7 select DM_THERMAL select MX7D select SUPPORT_SPL + imply CMD_DM config TARGET_MX7DSABRESD bool "mx7dsabresd"
@@ -33,6 +34,7 @@ config TARGET_MX7DSABRESD select DM select DM_THERMAL select MX7D + imply CMD_DM config TARGET_PICO_IMX7D bool "pico-imx7d"
@@ -40,6 +42,7 @@ config TARGET_PICO_IMX7D select DM select DM_THERMAL select MX7D + imply CMD_DM config TARGET_WARP7 bool "warp7"
@@ -47,6 +50,7 @@ config TARGET_WARP7 select DM select DM_THERMAL select MX7D + imply CMD_DM config TARGET_COLIBRI_IMX7 bool "Support Colibri iMX7S/iMX7D modules"
@@ -54,6 +58,7 @@ config TARGET_COLIBRI_IMX7 select DM select DM_SERIAL select DM_THERMAL + imply CMD_DM endchoice
arch/arm/mach-meson/Kconfig +2 -0
@@ -6,6 +6,7 @@ config MESON_GXBB select CLK select DM select DM_SERIAL + imply CMD_DM help The Amlogic Meson GXBaby (S905) is an ARM SoC with a quad-core Cortex-A53 CPU and a Mali-450 GPU.
@@ -16,6 +17,7 @@ config MESON_GXL select CLK select DM select DM_SERIAL + imply CMD_DM help The Amlogic Meson GXL (S905X and S905D) is an ARM SoC with a quad-core Cortex-A53 CPU and a Mali-450 GPU.
arch/arm/mach-omap2/am33xx/Kconfig +18 -0
@@ -34,6 +34,7 @@ config TARGET_AM335X_EVM select DM_GPIO select DM_SERIAL select TI_I2C_BOARD_DETECT + imply CMD_DM imply SPL_DM imply SPL_DM_SEQ_ALIAS imply SPL_ENV_SUPPORT
@@ -67,6 +68,7 @@ config TARGET_AM335X_BALTOS select DM select DM_GPIO select DM_SERIAL + imply CMD_DM config TARGET_AM335X_IGEP003X bool "Support am335x_igep003x"
@@ -74,6 +76,7 @@ config TARGET_AM335X_IGEP003X select DM select DM_GPIO select DM_SERIAL + imply CMD_DM config TARGET_AM335X_SHC bool "Support am335x based shc board from bosch"
@@ -81,6 +84,7 @@ config TARGET_AM335X_SHC select DM select DM_GPIO select DM_SERIAL + imply CMD_DM imply CMD_SPL config TARGET_AM335X_SL50
@@ -89,12 +93,14 @@ config TARGET_AM335X_SL50 select DM select DM_GPIO select DM_SERIAL + imply CMD_DM config TARGET_BAV335X bool "Support bav335x" select BOARD_LATE_INIT select DM select DM_SERIAL + imply CMD_DM help The BAV335x OEM Network Processor integrates all the functions of an embedded network computer in a small, easy to use SODIMM module which
@@ -118,12 +124,14 @@ config TARGET_CHILIBOARD select BOARD_LATE_INIT select DM select DM_SERIAL + imply CMD_DM config TARGET_CM_T335 bool "Support cm_t335" select DM select DM_GPIO select DM_SERIAL + imply CMD_DM config TARGET_DRACO bool "Support draco"
@@ -131,6 +139,7 @@ config TARGET_DRACO select DM select DM_GPIO select DM_SERIAL + imply CMD_DM config TARGET_ETAMIN bool "Support etamin"
@@ -138,24 +147,28 @@ config TARGET_ETAMIN select DM select DM_GPIO select DM_SERIAL + imply CMD_DM config TARGET_PCM051 bool "Support pcm051" select DM select DM_GPIO select DM_SERIAL + imply CMD_DM config TARGET_PENGWYN bool "Support pengwyn" select DM select DM_GPIO select DM_SERIAL + imply CMD_DM config TARGET_PEPPER bool "Support pepper" select DM select DM_GPIO select DM_SERIAL + imply CMD_DM config TARGET_PXM2 bool "Support pxm2"
@@ -163,6 +176,7 @@ config TARGET_PXM2 select DM select DM_GPIO select DM_SERIAL + imply CMD_DM config TARGET_RASTABAN bool "Support rastaban"
@@ -170,6 +184,7 @@ config TARGET_RASTABAN select DM select DM_GPIO select DM_SERIAL + imply CMD_DM config TARGET_RUT bool "Support rut"
@@ -177,6 +192,7 @@ config TARGET_RUT select DM select DM_GPIO select DM_SERIAL + imply CMD_DM config TARGET_THUBAN bool "Support thuban"
@@ -184,11 +200,13 @@ config TARGET_THUBAN select DM select DM_GPIO select DM_SERIAL + imply CMD_DM config TARGET_PDU001 bool "Support PDU001" select DM select DM_SERIAL + imply CMD_DM help Support for PDU001 platform developed by EETS GmbH. The PDU001 is a processor and display unit developed around
arch/arm/mach-omap2/omap3/Kconfig +10 -0
@@ -27,6 +27,7 @@ config TARGET_AM3517_EVM select DM_I2C select DM_MMC select DM_SERIAL + imply CMD_DM config TARGET_MT_VENTOUX bool "TeeJet Mt.Ventoux"
@@ -40,6 +41,7 @@ config TARGET_OMAP3_BEAGLE select DM_SERIAL select OMAP3_GPIO_5 select OMAP3_GPIO_6 + imply CMD_DM config TARGET_CM_T35 bool "CompuLab CM-T3530 and CM-T3730 boards"
@@ -58,6 +60,7 @@ config TARGET_DEVKIT8000 select DM select DM_GPIO select DM_SERIAL + imply CMD_DM config TARGET_OMAP3_EVM bool "TI OMAP3 EVM"
@@ -65,6 +68,7 @@ config TARGET_OMAP3_EVM select DM_GPIO select DM_SERIAL select OMAP3_GPIO_3 + imply CMD_DM config TARGET_OMAP3_IGEP00X0 bool "IGEP"
@@ -74,6 +78,7 @@ config TARGET_OMAP3_IGEP00X0 select OMAP3_GPIO_3 select OMAP3_GPIO_5 select OMAP3_GPIO_6 + imply CMD_DM config TARGET_OMAP3_OVERO bool "OMAP35xx Gumstix Overo"
@@ -85,12 +90,14 @@ config TARGET_OMAP3_OVERO select OMAP3_GPIO_4 select OMAP3_GPIO_5 select OMAP3_GPIO_6 + imply CMD_DM config TARGET_OMAP3_ZOOM1 bool "TI Zoom1" select DM select DM_GPIO select DM_SERIAL + imply CMD_DM config TARGET_AM3517_CRANE bool "am3517_crane"
@@ -123,6 +130,7 @@ config TARGET_OMAP3_LOGIC select OMAP3_GPIO_3 select OMAP3_GPIO_4 select OMAP3_GPIO_6 + imply CMD_DM config TARGET_NOKIA_RX51 bool "Nokia RX51"
@@ -145,6 +153,7 @@ config TARGET_OMAP3_CAIRO select DM select DM_GPIO select DM_SERIAL + imply CMD_DM config TARGET_SNIPER bool "LG Optimus Black"
@@ -156,6 +165,7 @@ config TARGET_SNIPER select OMAP3_GPIO_4 select OMAP3_GPIO_5 select OMAP3_GPIO_6 + imply CMD_DM endchoice
arch/arm/mach-rmobile/Kconfig.32 +8 -0
@@ -42,6 +42,7 @@ config TARGET_BLANCHE select DM select DM_SERIAL select USE_TINY_PRINTF + imply CMD_DM config TARGET_GOSE bool "Gose board"
@@ -50,6 +51,7 @@ config TARGET_GOSE select SPL_TINY_MEMSET select SUPPORT_SPL select USE_TINY_PRINTF + imply CMD_DM config TARGET_KOELSCH bool "Koelsch board"
@@ -58,6 +60,7 @@ config TARGET_KOELSCH select SPL_TINY_MEMSET select SUPPORT_SPL select USE_TINY_PRINTF + imply CMD_DM config TARGET_LAGER bool "Lager board"
@@ -66,6 +69,7 @@ config TARGET_LAGER select SPL_TINY_MEMSET select SUPPORT_SPL select USE_TINY_PRINTF + imply CMD_DM config TARGET_KZM9G bool "KZM9D board"
@@ -77,6 +81,7 @@ config TARGET_ALT select SPL_TINY_MEMSET select SUPPORT_SPL select USE_TINY_PRINTF + imply CMD_DM config TARGET_SILK bool "Silk board"
@@ -85,6 +90,7 @@ config TARGET_SILK select SPL_TINY_MEMSET select SUPPORT_SPL select USE_TINY_PRINTF + imply CMD_DM config TARGET_PORTER bool "Porter board"
@@ -93,6 +99,7 @@ config TARGET_PORTER select SPL_TINY_MEMSET select SUPPORT_SPL select USE_TINY_PRINTF + imply CMD_DM config TARGET_STOUT bool "Stout board"
@@ -101,6 +108,7 @@ config TARGET_STOUT select SPL_TINY_MEMSET select SUPPORT_SPL select USE_TINY_PRINTF + imply CMD_DM endchoice
arch/arm/mach-tegra/Kconfig +1 -0
@@ -40,6 +40,7 @@ config TEGRA_COMMON select OF_CONTROL select SPI select VIDCONSOLE_AS_LCD if DM_VIDEO + imply CMD_DM imply CRC32_VERIFY config TEGRA_NO_BPMP
arch/microblaze/Kconfig +1 -0
@@ -16,6 +16,7 @@ config TARGET_MICROBLAZE_GENERIC select OF_CONTROL select SUPPORT_SPL select SYSRESET + imply CMD_DM endchoice
arch/mips/Kconfig +6 -0
@@ -42,6 +42,7 @@ config TARGET_MALTA select SUPPORTS_CPU_MIPS64_R6 select SUPPORTS_LITTLE_ENDIAN select SWAP_IO_SPACE + imply CMD_DM config TARGET_VCT bool "Support vct"
@@ -74,6 +75,7 @@ config ARCH_ATH79 bool "Support QCA/Atheros ath79" select DM select OF_CONTROL + imply CMD_DM config ARCH_BMIPS bool "Support BMIPS SoCs"
@@ -83,11 +85,13 @@ config ARCH_BMIPS select OF_CONTROL select RAM select SYSRESET + imply CMD_DM config MACH_PIC32 bool "Support Microchip PIC32" select DM select OF_CONTROL + imply CMD_DM config TARGET_BOSTON bool "Support Boston"
@@ -107,6 +111,7 @@ config TARGET_BOSTON select SUPPORTS_CPU_MIPS64_R2 select SUPPORTS_CPU_MIPS64_R6 select SUPPORTS_LITTLE_ENDIAN + imply CMD_DM config TARGET_XILFPGA bool "Support Imagination Xilfpga"
@@ -120,6 +125,7 @@ config TARGET_XILFPGA select SUPPORTS_CPU_MIPS32_R1 select SUPPORTS_CPU_MIPS32_R2 select SUPPORTS_LITTLE_ENDIAN + imply CMD_DM help This supports IMGTEC MIPSfpga platform
arch/powerpc/cpu/mpc83xx/Kconfig +1 -0
@@ -64,6 +64,7 @@ config TARGET_MPC837XERDB config TARGET_IDS8313 bool "Support ids8313" select DM + imply CMD_DM config TARGET_KM8360 bool "Support km8360"
cmd/Kconfig +0 -1
@@ -640,7 +640,6 @@ config CMD_DFU config CMD_DM bool "dm - Access to driver model information" depends on DM - default y help Provides access to driver model data structures and information, such as a list of devices, list of uclasses and the state of each
Signature · 1 line
1.9.1
PATCH v2 4/5 dm: Change CMD_DM enabling
Quoted 6 lines · Michal Simek
CMD_DMis used for debug purpose and it shouldn't be enabled by default viaKconfig. Unfortunately this is in the tree for quite a long time that's why solution is to use imply DM for all targets which are enabling DM.Signed-off-by Michal Simek <[email protected]>
Reviewed-by Tom Rini <[email protected]>
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: not available URL: <http://lists.denx.de/pipermail/u-boot/attachments/20180723/80c6a72c/attachment.sig>
PATCH v2 4/5 dm: Change CMD_DM enabling
In reply to Michal SimekQuoted 6 lines · Michal Simek
CMD_DMis used for debug purpose and it shouldn't be enabled by default viaKconfig. Unfortunately this is in the tree for quite a long time that's why solution is to use imply DM for all targets which are enabling DM.Signed-off-by Michal Simek <[email protected]>
Reviewed-by Joe Hershberger <[email protected]>
PATCH v2 4/5 dm: Change CMD_DM enabling
In reply to Michal SimekQuoted 8 lines · Michal Simek
CMD_DMis used for debug purpose and it shouldn't be enabled by default viaKconfig. Unfortunately this is in the tree for quite a long time that's why solution is to use imply DM for all targets which are enabling DM.Signed-off-by Michal Simek <[email protected]>Reviewed-by Tom Rini <[email protected]>Reviewed-by Joe Hershberger <[email protected]>
Applied to u-boot/master, thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: not available URL: <http://lists.denx.de/pipermail/u-boot/attachments/20180730/d1ec924e/attachment.sig>
PATCH v2 5/5 Kconfig: Sort bool, default, select and imply options
In reply to Michal SimekAnother round of sorting Kconfig entries aplhabetically.
Signed-off-by Michal Simek <[email protected]>
---
Changes in v2: None
Kconfig | 22 ++++++++++----------- arch/arc/Kconfig | 10 +++++----- arch/arm/cpu/armv7/ls102xa/Kconfig | 10 +++++----- arch/arm/cpu/armv8/Kconfig | 4 ++-- arch/arm/mach-davinci/Kconfig | 4 ++-- arch/arm/mach-exynos/Kconfig | 30 ++++++++++++++--------------- arch/arm/mach-imx/mx3/Kconfig | 2 +- arch/arm/mach-mvebu/Kconfig | 6 +++--- arch/arm/mach-omap2/Kconfig | 6 +++--- arch/arm/mach-omap2/omap5/Kconfig | 12 ++++++------ arch/arm/mach-qemu/Kconfig | 2 +- arch/arm/mach-rockchip/rk3288/Kconfig | 20 +++++++++---------- arch/arm/mach-socfpga/Kconfig | 4 ++-- arch/arm/mach-stm32/Kconfig | 20 +++++++++---------- arch/arm/mach-tegra/tegra124/Kconfig | 4 ++-- arch/arm/mach-uniphier/Kconfig | 8 ++++---- arch/mips/mach-ath79/Kconfig | 10 +++++----- arch/mips/mach-bmips/Kconfig | 36 +++++++++++++++++------------------ arch/mips/mach-pic32/Kconfig | 6 +++--- arch/powerpc/Kconfig | 2 +- 20 files changed, 109 insertions(+), 109 deletions(-)
Kconfig +11 -11
@@ -68,25 +68,25 @@ config CC_COVERAGE config DISTRO_DEFAULTS bool "Select defaults suitable for booting general purpose Linux distributions" - imply USE_BOOTCOMMAND - select CMD_BOOTZ if ARM && !ARM64 + select AUTO_COMPLETE + select CMDLINE_EDITING select CMD_BOOTI if ARM64 + select CMD_BOOTZ if ARM && !ARM64 select CMD_DHCP if CMD_NET - select CMD_PING if CMD_NET - select CMD_PXE if NET select CMD_ENV_EXISTS select CMD_EXT2 select CMD_EXT4 select CMD_FAT select CMD_FS_GENERIC - imply CMD_MII if NET select CMD_PART if PARTITIONS + select CMD_PING if CMD_NET + select CMD_PXE if NET + select ENV_VARS_UBOOT_CONFIG select HUSH_PARSER - select CMDLINE_EDITING - select AUTO_COMPLETE - select SYS_LONGHELP select SUPPORT_RAW_INITRD - select ENV_VARS_UBOOT_CONFIG + select SYS_LONGHELP + imply CMD_MII if NET + imply USE_BOOTCOMMAND help Select this to enable various options and commands which are suitable for building u-boot for booting general purpose Linux distributions.
@@ -237,8 +237,8 @@ if FIT config FIT_ENABLE_SHA256_SUPPORT bool "Support SHA256 checksum of FIT image contents" - select SHA256 default y + select SHA256 help Enable this to support SHA256 checksum of FIT image contents. A SHA256 checksum is a 256-bit (32-byte) hash value used to check that
@@ -252,8 +252,8 @@ config FIT_ENABLE_SHA256_SUPPORT config FIT_SIGNATURE bool "Enable signature verification of FIT uImages" depends on DM - select RSA select HASH + select RSA help This option enables signature verification of FIT uImages, using a hash signed and verified using RSA. If
arch/arc/Kconfig +5 -5
@@ -31,36 +31,36 @@ choice config CPU_ARC750D bool "ARC 750D" - select ARC_MMU_V2 depends on ISA_ARCOMPACT + select ARC_MMU_V2 help Choose this option to build an U-Boot for ARC750D CPU. config CPU_ARC770D bool "ARC 770D" - select ARC_MMU_V3 depends on ISA_ARCOMPACT + select ARC_MMU_V3 help Choose this option to build an U-Boot for ARC770D CPU. config CPU_ARCEM6 bool "ARC EM6" - select ARC_MMU_ABSENT depends on ISA_ARCV2 + select ARC_MMU_ABSENT help Next Generation ARC Core based on ISA-v2 ISA without MMU. config CPU_ARCHS36 bool "ARC HS36" - select ARC_MMU_ABSENT depends on ISA_ARCV2 + select ARC_MMU_ABSENT help Next Generation ARC Core based on ISA-v2 ISA without MMU. config CPU_ARCHS38 bool "ARC HS38" - select ARC_MMU_V4 depends on ISA_ARCV2 + select ARC_MMU_V4 help Next Generation ARC Core based on ISA-v2 ISA with MMU.
arch/arm/cpu/armv7/ls102xa/Kconfig +5 -5
@@ -1,5 +1,7 @@ config ARCH_LS1021A bool + select SYS_FSL_DDR_BE if SYS_FSL_DDR + select SYS_FSL_DDR_VER_50 if SYS_FSL_DDR select SYS_FSL_ERRATUM_A008378 select SYS_FSL_ERRATUM_A008407 select SYS_FSL_ERRATUM_A008997
@@ -10,18 +12,16 @@ config ARCH_LS1021A select SYS_FSL_ERRATUM_A009942 select SYS_FSL_ERRATUM_A010315 select SYS_FSL_HAS_CCI400 - select SYS_FSL_SRDS_1 - select SYS_HAS_SERDES - select SYS_FSL_DDR_BE if SYS_FSL_DDR - select SYS_FSL_DDR_VER_50 if SYS_FSL_DDR select SYS_FSL_HAS_DDR3 if SYS_FSL_DDR select SYS_FSL_HAS_DDR4 if SYS_FSL_DDR select SYS_FSL_HAS_SEC select SYS_FSL_SEC_COMPAT_5 select SYS_FSL_SEC_LE + select SYS_FSL_SRDS_1 + select SYS_HAS_SERDES + imply CMD_PCI imply SCSI imply SCSI_AHCI - imply CMD_PCI menu "LS102xA architecture" depends on ARCH_LS1021A
arch/arm/cpu/armv8/Kconfig +2 -2
@@ -44,8 +44,8 @@ config ARMV8_SPIN_TABLE menu "ARMv8 secure monitor firmware" config ARMV8_SEC_FIRMWARE_SUPPORT bool "Enable ARMv8 secure monitor firmware framework support" - select OF_LIBFDT select FIT + select OF_LIBFDT help This framework is aimed at making secure monitor firmware load process brief.
@@ -60,8 +60,8 @@ config ARMV8_SEC_FIRMWARE_SUPPORT config SPL_ARMV8_SEC_FIRMWARE_SUPPORT bool "Enable ARMv8 secure monitor firmware framework support for SPL" - select SPL_OF_LIBFDT select SPL_FIT + select SPL_OF_LIBFDT help Say Y here to support this framework in SPL phase.
arch/arm/mach-davinci/Kconfig +2 -2
@@ -18,9 +18,9 @@ config TARGET_DA850EVM config TARGET_EA20 bool "EA20 board" + select BOARD_LATE_INIT select MACH_DAVINCI_DA850_EVM select SOC_DA850 - select BOARD_LATE_INIT config TARGET_OMAPL138_LCDK bool "OMAPL138 LCDK"
@@ -57,8 +57,8 @@ config SOC_DA850 config SOC_DA8XX bool - select SYS_DA850_PLL_INIT if SUPPORT_SPL || DA850_LOWLEVEL select SYS_DA850_DDR_INIT if SUPPORT_SPL || DA850_LOWLEVEL + select SYS_DA850_PLL_INIT if SUPPORT_SPL || DA850_LOWLEVEL config MACH_DAVINCI_DA850_EVM bool
arch/arm/mach-exynos/Kconfig +15 -15
@@ -6,8 +6,8 @@ choice config ARCH_EXYNOS4 bool "Exynos4 SoC family" - select CPU_V7A select BOARD_EARLY_INIT_F + select CPU_V7A help Samsung Exynos4 SoC family are based on ARM Cortex-A9 CPU. There are multiple SoCs in this family including Exynos4210, Exynos4412,
@@ -15,14 +15,14 @@ config ARCH_EXYNOS4 config ARCH_EXYNOS5 bool "Exynos5 SoC family" - select CPU_V7A select BOARD_EARLY_INIT_F + select CPU_V7A select SHA_HW_ACCEL - imply CRC32_VERIFY imply CMD_HASH + imply CRC32_VERIFY imply HASH_VERIFY - imply USB_ETHER_RTL8152 imply USB_ETHER_ASIX + imply USB_ETHER_RTL8152 imply USB_ETHER_SMSC95XX help Samsung Exynos5 SoC family are based on ARM Cortex-A15 CPU (and
@@ -46,9 +46,9 @@ choice prompt "EXYNOS4 board select" config TARGET_SMDKV310 - select SUPPORT_SPL bool "Exynos4210 SMDKV310 board" select OF_CONTROL + select SUPPORT_SPL config TARGET_TRATS bool "Exynos4210 Trats board"
@@ -93,39 +93,39 @@ config TARGET_ARNDALE select ARM_ERRATA_774769 select CPU_V7_HAS_NONSEC select CPU_V7_HAS_VIRT - select SUPPORT_SPL select OF_CONTROL + select SUPPORT_SPL config TARGET_SMDK5250 bool "SMDK5250 board" - select SUPPORT_SPL select OF_CONTROL + select SUPPORT_SPL config TARGET_SNOW bool "Snow board" - select SUPPORT_SPL select OF_CONTROL + select SUPPORT_SPL config TARGET_SPRING bool "Spring board" - select SUPPORT_SPL select OF_CONTROL select SPL_DISABLE_OF_CONTROL + select SUPPORT_SPL config TARGET_SMDK5420 bool "SMDK5420 board" - select SUPPORT_SPL select OF_CONTROL + select SUPPORT_SPL config TARGET_PEACH_PI bool "Peach Pi board" - select SUPPORT_SPL select OF_CONTROL + select SUPPORT_SPL config TARGET_PEACH_PIT bool "Peach Pit board" - select SUPPORT_SPL select OF_CONTROL + select SUPPORT_SPL endchoice endif
@@ -139,12 +139,12 @@ config TARGET_ESPRESSO7420 bool "ESPRESSO7420 board" select ARM64 select ARMV8_MULTIENTRY - select SUPPORT_SPL + select CLK_EXYNOS select OF_CONTROL - select SPL_DISABLE_OF_CONTROL select PINCTRL select PINCTRL_EXYNOS7420 - select CLK_EXYNOS + select SPL_DISABLE_OF_CONTROL + select SUPPORT_SPL endchoice endif
arch/arm/mach-imx/mx3/Kconfig +1 -1
@@ -9,9 +9,9 @@ choice config TARGET_MX31PDK bool "Support the i.MX31 PDK board from Freescale/NXP" + select BOARD_EARLY_INIT_F select BOARD_LATE_INIT select SUPPORT_SPL - select BOARD_EARLY_INIT_F endchoice
arch/arm/mach-mvebu/Kconfig +3 -3
@@ -6,14 +6,14 @@ config HAVE_MVEBU_EFUSE config ARMADA_32BIT bool + select ARCH_MISC_INIT + select BOARD_EARLY_INIT_F select CPU_V7A - select SUPPORT_SPL select SPL_DM select SPL_DM_SEQ_ALIAS select SPL_OF_CONTROL select SPL_SIMPLE_BUS - select BOARD_EARLY_INIT_F - select ARCH_MISC_INIT + select SUPPORT_SPL config ARMADA_64BIT bool
arch/arm/mach-omap2/Kconfig +3 -3
@@ -6,11 +6,11 @@ choice config OMAP34XX bool "OMAP34XX SoC" + select ARM_CORTEX_A8_CVE_2017_5715 select ARM_ERRATA_430973 select ARM_ERRATA_454179 select ARM_ERRATA_621766 select ARM_ERRATA_725233 - select ARM_CORTEX_A8_CVE_2017_5715 select USE_TINY_PRINTF imply NAND_OMAP_GPMC imply SPL_EXT_SUPPORT
@@ -52,9 +52,9 @@ config OMAP44XX config OMAP54XX bool "OMAP54XX SoC" + select ARM_CORTEX_A15_CVE_2017_5715 select ARM_ERRATA_798870 select SYS_THUMB_BUILD - select ARM_CORTEX_A15_CVE_2017_5715 imply NAND_OMAP_ELM imply NAND_OMAP_GPMC imply SPL_DISPLAY_PRINT
@@ -116,8 +116,8 @@ config AM43XX config AM33XX bool "AM33XX SoC" - select SPECIFY_CONSOLE_INDEX select ARM_CORTEX_A8_CVE_2017_5715 + select SPECIFY_CONSOLE_INDEX imply NAND_OMAP_ELM imply NAND_OMAP_GPMC imply SPL_NAND_AM33XX_BCH
arch/arm/mach-omap2/omap5/Kconfig +6 -6
@@ -23,26 +23,26 @@ config TARGET_DRA7XX_EVM bool "TI DRA7XX" select BOARD_LATE_INIT select DRA7XX - select TI_I2C_BOARD_DETECT select PHYS_64BIT - imply SCSI + select TI_I2C_BOARD_DETECT imply DM_PMIC - imply PMIC_LP87565 imply DM_REGULATOR imply DM_REGULATOR_LP87565 - imply SPL_THERMAL imply DM_THERMAL + imply PMIC_LP87565 + imply SCSI + imply SPL_THERMAL imply TI_DRA7_THERMAL config TARGET_AM57XX_EVM bool "AM57XX" select BOARD_LATE_INIT + select CMD_DDR3 select DRA7XX select TI_I2C_BOARD_DETECT - select CMD_DDR3 + imply DM_THERMAL imply SCSI imply SPL_THERMAL - imply DM_THERMAL imply TI_DRA7_THERMAL endchoice
arch/arm/mach-qemu/Kconfig +1 -1
@@ -14,8 +14,8 @@ endif config TARGET_QEMU_ARM_32BIT bool "Support qemu_arm" depends on ARCH_QEMU - select CPU_V7A select ARCH_SUPPORT_PSCI + select CPU_V7A select SYS_ARCH_TIMER config TARGET_QEMU_ARM_64BIT
arch/arm/mach-rockchip/rk3288/Kconfig +10 -10
@@ -87,22 +87,22 @@ config TARGET_POPMETAL_RK3288 config TARGET_VYASA_RK3288 bool "Vyasa-RK3288" select BOARD_LATE_INIT - select TPL + select ROCKCHIP_BROM_HELPER select SUPPORT_TPL - select TPL_DM - select TPL_REGMAP - select TPL_SYSCON - select TPL_CLK - select TPL_RAM - select TPL_OF_PLATDATA - select TPL_OF_CONTROL + select TPL select TPL_BOOTROM_SUPPORT - select TPL_NEEDS_SEPARATE_TEXT_BASE if SPL - select ROCKCHIP_BROM_HELPER + select TPL_CLK + select TPL_DM select TPL_DRIVERS_MISC_SUPPORT select TPL_LIBCOMMON_SUPPORT select TPL_LIBGENERIC_SUPPORT + select TPL_NEEDS_SEPARATE_TEXT_BASE if SPL + select TPL_OF_CONTROL + select TPL_OF_PLATDATA + select TPL_RAM + select TPL_REGMAP select TPL_SERIAL_SUPPORT + select TPL_SYSCON help Vyasa is a RK3288-based development board with 2 USB ports, HDMI, VGA, micro-SD card, audio, WiFi and Gigabit Ethernet, It
arch/arm/mach-socfpga/Kconfig +2 -2
@@ -9,8 +9,8 @@ config TARGET_SOCFPGA_ARRIA5 config TARGET_SOCFPGA_ARRIA10 bool - select SPL_BOARD_INIT if SPL select ALTERA_SDRAM + select SPL_BOARD_INIT if SPL config TARGET_SOCFPGA_CYCLONE5 bool
@@ -23,8 +23,8 @@ config TARGET_SOCFPGA_GEN5 config TARGET_SOCFPGA_STRATIX10 bool select ARMV8_MULTIENTRY - select ARMV8_SPIN_TABLE select ARMV8_SET_SMPEN + select ARMV8_SPIN_TABLE choice prompt "Altera SOCFPGA board select"
arch/arm/mach-stm32/Kconfig +10 -10
@@ -9,9 +9,9 @@ config STM32F4 select PINCTRL select PINCTRL_STM32 select RAM - select STM32_SDRAM select STM32_RCC select STM32_RESET + select STM32_SDRAM select STM32_SERIAL select STM32_TIMER select TIMER
@@ -25,13 +25,6 @@ config STM32F7 select PINCTRL select PINCTRL_STM32 select RAM - select STM32_SDRAM - select STM32_RCC - select STM32_RESET - select STM32_SERIAL - select STM32_TIMER - select TIMER - select SUPPORT_SPL select SPL select SPL_BOARD_INIT select SPL_CLK
@@ -46,13 +39,20 @@ config STM32F7 select SPL_OF_CONTROL select SPL_OF_LIBFDT select SPL_OF_TRANSLATE - imply SPL_OS_BOOT select SPL_PINCTRL select SPL_RAM select SPL_SERIAL_SUPPORT select SPL_SYS_MALLOC_SIMPLE select SPL_TIMER select SPL_XIP_SUPPORT + select STM32_RCC + select STM32_RESET + select STM32_SDRAM + select STM32_SERIAL + select STM32_TIMER + select SUPPORT_SPL + select TIMER + imply SPL_OS_BOOT config STM32H7 bool "stm32h7 family"
@@ -64,9 +64,9 @@ config STM32H7 select PINCTRL_STM32 select RAM select REGMAP - select STM32_SDRAM select STM32_RCC select STM32_RESET + select STM32_SDRAM select STM32_SERIAL select STM32_TIMER select SYSCON
arch/arm/mach-tegra/tegra124/Kconfig +2 -2
@@ -6,16 +6,16 @@ choice config TARGET_APALIS_TK1 bool "Toradex Apalis TK1 module" + select ARCH_SUPPORT_PSCI select CPU_V7_HAS_NONSEC select CPU_V7_HAS_VIRT - select ARCH_SUPPORT_PSCI config TARGET_JETSON_TK1 bool "NVIDIA Tegra124 Jetson TK1 board" + select ARCH_SUPPORT_PSCI select BOARD_LATE_INIT select CPU_V7_HAS_NONSEC select CPU_V7_HAS_VIRT - select ARCH_SUPPORT_PSCI config TARGET_CEI_TK1_SOM bool "Colorado Engineering Inc Tegra124 TK1-som board"
arch/arm/mach-uniphier/Kconfig +4 -4
@@ -5,10 +5,10 @@ config SYS_CONFIG_NAME config ARCH_UNIPHIER_32BIT bool + select ARCH_SUPPORT_PSCI + select ARMV7_NONSEC select CPU_V7A select CPU_V7_HAS_NONSEC - select ARMV7_NONSEC - select ARCH_SUPPORT_PSCI choice prompt "UniPhier SoC select"
@@ -68,8 +68,8 @@ config ARCH_UNIPHIER_LD11 config ARCH_UNIPHIER_LD20 bool "Enable UniPhier LD20 SoC support" depends on ARCH_UNIPHIER_V8_MULTI - select OF_BOARD_SETUP default y + select OF_BOARD_SETUP config ARCH_UNIPHIER_PXS3 bool "Enable UniPhier PXs3 SoC support"
@@ -79,8 +79,8 @@ config ARCH_UNIPHIER_PXS3 config CACHE_UNIPHIER bool "Enable the UniPhier L2 cache controller" depends on ARCH_UNIPHIER_32BIT - select SYS_CACHE_SHIFT_7 default y + select SYS_CACHE_SHIFT_7 help This option allows to use the UniPhier System Cache as L2 cache.
arch/mips/mach-ath79/Kconfig +5 -5
@@ -6,30 +6,30 @@ config SYS_SOC config SOC_AR933X bool + select MIPS_TUNE_24KC + select ROM_EXCEPTION_VECTORS select SUPPORTS_BIG_ENDIAN select SUPPORTS_CPU_MIPS32_R1 select SUPPORTS_CPU_MIPS32_R2 - select ROM_EXCEPTION_VECTORS - select MIPS_TUNE_24KC help This supports QCA/Atheros ar933x family SOCs. config SOC_AR934X bool + select MIPS_TUNE_74KC select SUPPORTS_BIG_ENDIAN select SUPPORTS_CPU_MIPS32_R1 select SUPPORTS_CPU_MIPS32_R2 - select MIPS_TUNE_74KC help This supports QCA/Atheros ar934x family SOCs. config SOC_QCA953X bool + select MIPS_TUNE_24KC + select ROM_EXCEPTION_VECTORS select SUPPORTS_BIG_ENDIAN select SUPPORTS_CPU_MIPS32_R1 select SUPPORTS_CPU_MIPS32_R2 - select ROM_EXCEPTION_VECTORS - select MIPS_TUNE_24KC help This supports QCA/Atheros qca953x family SOCs.
arch/mips/mach-bmips/Kconfig +18 -18
@@ -20,10 +20,10 @@ choice config SOC_BMIPS_BCM3380 bool "BMIPS BCM3380 family" + select MIPS_L1_CACHE_SHIFT_4 + select MIPS_TUNE_4KC select SUPPORTS_BIG_ENDIAN select SUPPORTS_CPU_MIPS32_R1 - select MIPS_TUNE_4KC - select MIPS_L1_CACHE_SHIFT_4 select SWAP_IO_SPACE select SYSRESET_WATCHDOG help
@@ -31,10 +31,10 @@ config SOC_BMIPS_BCM3380 config SOC_BMIPS_BCM6318 bool "BMIPS BCM6318 family" + select MIPS_L1_CACHE_SHIFT_4 + select MIPS_TUNE_4KC select SUPPORTS_BIG_ENDIAN select SUPPORTS_CPU_MIPS32_R1 - select MIPS_TUNE_4KC - select MIPS_L1_CACHE_SHIFT_4 select SWAP_IO_SPACE select SYSRESET_SYSCON help
@@ -42,10 +42,10 @@ config SOC_BMIPS_BCM6318 config SOC_BMIPS_BCM6328 bool "BMIPS BCM6328 family" + select MIPS_L1_CACHE_SHIFT_4 + select MIPS_TUNE_4KC select SUPPORTS_BIG_ENDIAN select SUPPORTS_CPU_MIPS32_R1 - select MIPS_TUNE_4KC - select MIPS_L1_CACHE_SHIFT_4 select SWAP_IO_SPACE select SYSRESET_SYSCON help
@@ -53,10 +53,10 @@ config SOC_BMIPS_BCM6328 config SOC_BMIPS_BCM6338 bool "BMIPS BCM6338 family" + select MIPS_L1_CACHE_SHIFT_4 + select MIPS_TUNE_4KC select SUPPORTS_BIG_ENDIAN select SUPPORTS_CPU_MIPS32_R1 - select MIPS_TUNE_4KC - select MIPS_L1_CACHE_SHIFT_4 select SWAP_IO_SPACE select SYSRESET_SYSCON help
@@ -64,10 +64,10 @@ config SOC_BMIPS_BCM6338 config SOC_BMIPS_BCM6348 bool "BMIPS BCM6348 family" + select MIPS_L1_CACHE_SHIFT_4 + select MIPS_TUNE_4KC select SUPPORTS_BIG_ENDIAN select SUPPORTS_CPU_MIPS32_R1 - select MIPS_TUNE_4KC - select MIPS_L1_CACHE_SHIFT_4 select SWAP_IO_SPACE select SYSRESET_WATCHDOG help
@@ -75,10 +75,10 @@ config SOC_BMIPS_BCM6348 config SOC_BMIPS_BCM6358 bool "BMIPS BCM6358 family" + select MIPS_L1_CACHE_SHIFT_4 + select MIPS_TUNE_4KC select SUPPORTS_BIG_ENDIAN select SUPPORTS_CPU_MIPS32_R1 - select MIPS_TUNE_4KC - select MIPS_L1_CACHE_SHIFT_4 select SWAP_IO_SPACE select SYSRESET_SYSCON help
@@ -86,10 +86,10 @@ config SOC_BMIPS_BCM6358 config SOC_BMIPS_BCM6368 bool "BMIPS BCM6368 family" + select MIPS_L1_CACHE_SHIFT_4 + select MIPS_TUNE_4KC select SUPPORTS_BIG_ENDIAN select SUPPORTS_CPU_MIPS32_R1 - select MIPS_TUNE_4KC - select MIPS_L1_CACHE_SHIFT_4 select SWAP_IO_SPACE select SYSRESET_SYSCON help
@@ -97,10 +97,10 @@ config SOC_BMIPS_BCM6368 config SOC_BMIPS_BCM6362 bool "BMIPS BCM6362 family" + select MIPS_L1_CACHE_SHIFT_4 + select MIPS_TUNE_4KC select SUPPORTS_BIG_ENDIAN select SUPPORTS_CPU_MIPS32_R1 - select MIPS_TUNE_4KC - select MIPS_L1_CACHE_SHIFT_4 select SWAP_IO_SPACE select SYSRESET_SYSCON help
@@ -108,10 +108,10 @@ config SOC_BMIPS_BCM6362 config SOC_BMIPS_BCM63268 bool "BMIPS BCM63268 family" + select MIPS_L1_CACHE_SHIFT_4 + select MIPS_TUNE_4KC select SUPPORTS_BIG_ENDIAN select SUPPORTS_CPU_MIPS32_R1 - select MIPS_TUNE_4KC - select MIPS_L1_CACHE_SHIFT_4 select SWAP_IO_SPACE select SYSRESET_SYSCON help
arch/mips/mach-pic32/Kconfig +3 -3
@@ -9,12 +9,12 @@ choice config SOC_PIC32MZDA bool "Microchip PIC32MZ[DA] family" - select SUPPORTS_LITTLE_ENDIAN + select MIPS_L1_CACHE_SHIFT_4 + select ROM_EXCEPTION_VECTORS select SUPPORTS_CPU_MIPS32_R1 select SUPPORTS_CPU_MIPS32_R2 - select MIPS_L1_CACHE_SHIFT_4 + select SUPPORTS_LITTLE_ENDIAN select SYS_MIPS_CACHE_INIT_RAM_LOAD - select ROM_EXCEPTION_VECTORS help This supports Microchip PIC32MZ[DA] family of microcontrollers.
arch/powerpc/Kconfig +1 -1
@@ -20,9 +20,9 @@ config MPC85xx select CREATE_ARCH_SYMLINK select SYS_FSL_DDR select SYS_FSL_DDR_BE - imply USB_EHCI_HCD if USB imply CMD_HASH imply CMD_IRQ + imply USB_EHCI_HCD if USB config MPC86xx bool "MPC86xx"
Signature · 1 line
1.9.1
PATCH v2 5/5 Kconfig: Sort bool, default, select and imply options
Quoted 3 lines · Michal Simek
Another round of sorting
Kconfigentries aplhabetically.Signed-off-by Michal Simek <[email protected]>
Reviewed-by Tom Rini <[email protected]>
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: not available URL: <http://lists.denx.de/pipermail/u-boot/attachments/20180723/47cf8cca/attachment.sig>
PATCH v2 5/5 Kconfig: Sort bool, default, select and imply options
In reply to Michal SimekHi Michal,
Quoted 6 lines · Michal Simek
Another round of sorting
Kconfigentries aplhabetically.Signed-off-by Michal Simek <[email protected]>---
Changes in v2: None
[snip]
Quoted 1 line
arch/arc/Kconfig | 10 +++++-----
Acked-by Alexey Brodkin <[email protected]>
PATCH v2 5/5 Kconfig: Sort bool, default, select and imply options
In reply to Michal SimekQuoted 3 lines · Michal Simek
Another round of sorting
Kconfigentries aplhabetically.Signed-off-by Michal Simek <[email protected]>
Reviewed-by Joe Hershberger <[email protected]>
PATCH v2 5/5 Kconfig: Sort bool, default, select and imply options
In reply to Michal SimekQuoted 6 lines · Michal Simek
Another round of sorting
Kconfigentries aplhabetically.Signed-off-by Michal Simek <[email protected]>Reviewed-by Tom Rini <[email protected]>Acked-by Alexey Brodkin <[email protected]>Reviewed-by Joe Hershberger <[email protected]>
Applied to u-boot/master, thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: not available URL: <http://lists.denx.de/pipermail/u-boot/attachments/20180730/76d3a57a/attachment.sig>
PATCH v2 1/5 common: Log should depends on DM not be selected by DM
In reply to Michal SimekQuoted 4 lines · Michal Simek
Better use depends on instead of select.
Signed-off-by Michal Simek <[email protected]>Reviewed-by Tom Rini <[email protected]>
Reviewed-by Tom Rini <[email protected]>
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: not available URL: <http://lists.denx.de/pipermail/u-boot/attachments/20180723/940b4c49/attachment.sig>
PATCH v2 1/5 common: Log should depends on DM not be selected by DM
In reply to Michal SimekQuoted 5 lines · Michal Simek
Better use depends on instead of select.
Signed-off-by Michal Simek <[email protected]>Reviewed-by Tom Rini <[email protected]>Reviewed-by Tom Rini <[email protected]>
Applied to u-boot/master, thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: not available URL: <http://lists.denx.de/pipermail/u-boot/attachments/20180730/7a1db88e/attachment.sig>