drm/i915/guc: Avoid wasting memory on incorrect GuC pin bias
Subsystems (2)
PATCH v8 1/6 drm/i915/guc: Avoid wasting memory on incorrect GuC pin bias
It would appear that the calculated GuC pin bias was larger than it should be, as the GuC address space does NOT contain the "HW contexts RSVD" part of the WOPCM. Thus, the GuC pin bias is simply the GuC WOPCM size.
v5:
Clarify the diagram to better represent the GuC address space. Since we now don't use guc.base for the pin bias there's no need to validate it. It also has already been verified in WOPCM init.
Bspec: 1180
--- drivers/gpu/drm/i915/intel_guc.c | 49 +++++++++++++------------------- 1 file changed, 20 insertions(+), 29 deletions(-)
drivers/gpu/drm/i915/intel_guc.c +20 -29
@@ -585,50 +585,41 @@ int intel_guc_resume(struct intel_guc *guc)* * :: * -* +==============> +====================+ <== GUC_GGTT_TOP -* ^ | | -* | | | -* | | DRAM | -* | | Memory | -* | | | -* GuC | | -* Address +========> +====================+ <== WOPCM Top -* Space ^ | HW contexts RSVD | -* | | | WOPCM | -* | | +==> +--------------------+ <== GuC WOPCM Top -* | GuC ^ | | -* | GGTT | | | -* | Pin GuC | GuC | -* | Bias WOPCM | WOPCM | -* | | Size | | -* | | | | | -* v v v | | -* +=====+=====+==> +====================+ <== GuC WOPCM Base -* | Non-GuC WOPCM | -* | (HuC/Reserved) | -* +====================+ <== WOPCM Base +* +===========> +====================+ <== FFFF_FFFF +* ^ | Reserved | +* | +====================+ <== GUC_GGTT_TOP +* | | | +* | | DRAM | +* GuC | | +* Address +===> +====================+ <== GuC ggtt_pin_bias +* Space ^ | | +* | | | | +* | GuC | GuC | +* | WOPCM | WOPCM | +* | Size | | +* | | | | +* v v | | +* +=======+===> +====================+ <== 0000_0000 * -* The lower part of GuC Address Space [0, ggtt_pin_bias) is mapped to WOPCM +* The lower part of GuC Address Space [0, ggtt_pin_bias) is mapped to GuC WOPCM * while upper part of GuC Address Space [ggtt_pin_bias, GUC_GGTT_TOP) is mapped -* to DRAM. The value of the GuC ggtt_pin_bias is determined by WOPCM size and -* actual GuC WOPCM size. +* to DRAM. The value of the GuC ggtt_pin_bias is the GuC WOPCM size. */ /** * guc_init_ggtt_pin_bias() - Initialize the GuC ggtt_pin_bias value. * @guc: intel_guc structure. * -* This function will calculate and initialize the ggtt_pin_bias value based on -* overall WOPCM size and GuC WOPCM size. +* This function will calculate and initialize the ggtt_pin_bias value +* based on the GuC WOPCM size. */ static void guc_init_ggtt_pin_bias (struct intel_guc *guc) {struct drm_i915_private *i915 =guc_to_i915 (guc);GEM_BUG_ON (!i915->wopcm.size); -GEM_BUG_ON (i915->wopcm.size < i915->wopcm.guc.base); - guc->ggtt_pin_bias = i915->wopcm.size - i915->wopcm.guc.base; + guc->ggtt_pin_bias = i915->wopcm.guc.size; }/**
Signature · 6 lines
2.17.1 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
PATCH v8 2/6 drm/i915/guc: Do not partition WOPCM if GuC is not used
There seems to be no reason for doing extra work on WOPCM partitioning in the case GuC is not used, as the partitioning will not be used by the intel_wopcm_init_hw function anyway.
--- drivers/gpu/drm/i915/intel_wopcm.c | 3 +++ 1 file changed, 3 insertions(+)
drivers/gpu/drm/i915/intel_wopcm.c +3 -0
@@ -163,6 +163,9 @@ int intel_wopcm_init(struct intel_wopcm *wopcm)u32 guc_wopcm_rsvd;int err; +if (!USES_GUC (dev_priv)) +return 0 ; +GEM_BUG_ON (!wopcm->size);if (guc_fw_size >= wopcm->size) {
Signature · 6 lines
2.17.1 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
PATCH v8 3/6 drm/i915/guc: Move the pin bias value from GuC to GGTT
In reply to Jakub BartmińskiRemoving the pin bias from GuC allows us to not check for GuC every time we pin a context, which fixes the assertion error on unresolved GuC platform default in mock contexts selftest.
It also seems that we were using uninitialized WOPCM variables when setting the GuC pin bias. The pin bias has to be set after the WOPCM, but before the call to i915_gem_contexts_init where the first contexts are pinned.
v2:
This also makes it so that there's no need to set GuC variables from within the WOPCM init function or to move the WOPCM init, while keeping the correct initialization order. Also for mock tests the pin bias is left at 0 and we make sure that the pin bias with GuC will not be smaller than without GuC.
v3:
Avoid unused i915 in intel_guc_ggtt_offset if debug is disabled.
v4:
Squash with WOPCM init reordering.
Moved the i915_ggtt_pin_bias helper to this patch, and made some functions use it instead of directly dereferencing i915->ggtt.
v5:
Since we now don't use wopcm.guc.base for the pin bias there's no need to validate it. It also has already been verified in WOPCM init.
v6:
Deleted the now unnecessarily introduced includes from previous versions. Dropped naming changes from dev_priv to i915 for better patch readability.
v7:
Changed some comments to make more sense in the context they're in.
v8:
Moved and renamed the function which now returns the wopcm.guc.size to intel_guc.c:intel_guc_reserved_gtt_size to avoid any possible confusion with the pin_bias in ggtt, which should be used for pinning. Fixed patch not applying or the most recent upstream.
Testcase: igt/drv_selftest/mock_contexts #GuC
--- drivers/gpu/drm/i915/i915_gem_context.c | 10 +----- drivers/gpu/drm/i915/i915_gem_gtt.c | 9 ++++++ drivers/gpu/drm/i915/i915_gem_gtt.h | 2 ++ drivers/gpu/drm/i915/i915_vma.h | 5 +++ drivers/gpu/drm/i915/intel_guc.c | 42 ++++++++++++------------- drivers/gpu/drm/i915/intel_guc.h | 12 +++---- drivers/gpu/drm/i915/intel_huc.c | 2 +- drivers/gpu/drm/i915/intel_uc_fw.c | 2 +- 8 files changed, 44 insertions(+), 40 deletions(-)
drivers/gpu/drm/i915/i915_gem_context.c +1 -9
@@ -329,15 +329,7 @@ __create_hw_context(struct drm_i915_private *dev_priv, ctx->desc_template =default_desc_template (dev_priv, dev_priv->mm.aliasing_ppgtt); -/* -* GuC requires the ring to be placed in Non-WOPCM memory. If GuC is not -* present or not in use we still need a small bias as ring wraparound -* at offset 0 sometimes hangs. No idea why. -*/ -if (USES_GUC (dev_priv)) - ctx->ggtt_offset_bias = dev_priv->guc.ggtt_pin_bias; -else - ctx->ggtt_offset_bias =I915_GTT_PAGE_SIZE ; + ctx->ggtt_offset_bias = dev_priv->ggtt.pin_bias;return ctx;
drivers/gpu/drm/i915/i915_gem_gtt.c +9 -0
@@ -2929,6 +2929,15 @@ int i915_gem_init_ggtt(struct drm_i915_private *dev_priv)struct drm_mm_node *entry;int ret; +/* +* GuC requires all resources that we're sharing with it to be placed in +* non-WOPCM memory. If GuC is not present or not in use we still need a +* small bias as ring wraparound at offset 0 sometimes hangs. No idea +* why. +*/ + ggtt->pin_bias =max_t (u32,I915_GTT_PAGE_SIZE , +intel_guc_reserved_gtt_size (&dev_priv->guc)); + ret =intel_vgt_balloon (dev_priv);if (ret)return ret;
drivers/gpu/drm/i915/i915_gem_gtt.h +2 -0
@@ -401,6 +401,8 @@ struct i915_ggtt {int mtrr; +u32 pin_bias; +struct drm_mm_node error_capture; };
drivers/gpu/drm/i915/i915_vma.h +5 -0
@@ -208,6 +208,11 @@ static inline u32 i915_ggtt_offset(const struct i915_vma *vma)return lower_32_bits (vma->node.start); } +static inline u32 i915_ggtt_pin_bias (struct i915_vma *vma) +{ +return i915_vm_to_ggtt (vma->vm)->pin_bias; +} +static inline struct i915_vma *i915_vma_get (struct i915_vma *vma) {i915_gem_object_get (vma->obj);
drivers/gpu/drm/i915/intel_guc.c +20 -22
75 lines not on this page · raw message
drivers/gpu/drm/i915/intel_guc.h +5 -7
@@ -49,9 +49,6 @@ struct intel_guc {struct intel_guc_log log;struct intel_guc_ct ct; -/* Offset where Non-WOPCM memory starts. */ -u32 ggtt_pin_bias; -/* Log snapshot if GuC errors during load */ struct drm_i915_gem_object *load_err_log;
@@ -130,10 +127,10 @@ static inline void intel_guc_to_host_event_handler(struct intel_guc *guc)* @vma: i915 graphics virtual memory area. * * GuC does not allow any gfx GGTT address that falls into range -* [0, GuC ggtt_pin_bias), which is reserved for Boot ROM, SRAM and WOPCM. -* Currently, in order to exclude [0, GuC ggtt_pin_bias) address space from +* [0, ggtt.pin_bias), which is reserved for Boot ROM, SRAM and WOPCM. +* Currently, in order to exclude [0, ggtt.pin_bias) address space from * GGTT, all gfx objects used by GuC are allocated with intel_guc_allocate_vma() -* and pinned with PIN_OFFSET_BIAS along with the value of GuC ggtt_pin_bias. +* and pinned with PIN_OFFSET_BIAS along with the value of ggtt.pin_bias. * * Return: GGTT offset of the @vma. */
@@ -142,7 +139,7 @@ static inline u32 intel_guc_ggtt_offset(struct intel_guc *guc, {u32 offset =i915_ggtt_offset (vma); -GEM_BUG_ON (offset < guc->ggtt_pin_bias); +GEM_BUG_ON (offset <i915_ggtt_pin_bias (vma));GEM_BUG_ON (range_overflows_t (u64, offset, vma->size,GUC_GGTT_TOP ));return offset;
@@ -168,6 +165,7 @@ int intel_guc_auth_huc(struct intel_guc *guc, u32 rsa_offset);int intel_guc_suspend (struct intel_guc *guc);int intel_guc_resume (struct intel_guc *guc);struct i915_vma *intel_guc_allocate_vma (struct intel_guc *guc,u32 size); +u32 intel_guc_reserved_gtt_size (struct intel_guc *guc);static inline int intel_guc_sanitize (struct intel_guc *guc) {
drivers/gpu/drm/i915/intel_huc.c +1 -1
@@ -63,7 +63,7 @@ int intel_huc_auth(struct intel_huc *huc)return -ENOEXEC ; vma =i915_gem_object_ggtt_pin (huc->fw.obj,NULL ,0 ,0 , -PIN_OFFSET_BIAS | guc->ggtt_pin_bias); +PIN_OFFSET_BIAS | i915->ggtt.pin_bias);if (IS_ERR (vma)) { ret =PTR_ERR (vma);DRM_ERROR ("HuC: Failed to pin huc fw object %d\n" , ret);
drivers/gpu/drm/i915/intel_uc_fw.c +1 -1
@@ -222,7 +222,7 @@ int intel_uc_fw_upload(struct intel_uc_fw *uc_fw, goto fail; } - ggtt_pin_bias =to_i915 (uc_fw->obj->base.dev)->guc.ggtt_pin_bias; + ggtt_pin_bias =to_i915 (uc_fw->obj->base.dev)->ggtt.pin_bias; vma =i915_gem_object_ggtt_pin (uc_fw->obj,NULL ,0 ,0 ,PIN_OFFSET_BIAS | ggtt_pin_bias);if (IS_ERR (vma)) {
Signature · 6 lines
2.17.1 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
PATCH v8 4/6 drm/i915: Remove unnecessary ggtt_offset_bias from i915_gem_context
In reply to Jakub BartmińskiSince ggtt_offset_bias is now stored in ggtt.pin_bias, it is duplicated inside i915_gem_context, and can instead be accessed directly from ggtt.
v3:
Added a helper function to retrieve the ggtt.pin_bias from the vma.
v4:
Moved the helper function to the previous patch in the series. Dropped the bias from intel_ring_pin. This introduces a slight functional change since we are always pinning the ring a bit higher if GuC is present even though we don't really need to.
v8:
Fixed patch not applying on the most recent upstream.
--- drivers/gpu/drm/i915/i915_gem_context.c | 2 -- drivers/gpu/drm/i915/i915_gem_context.h | 3 --- drivers/gpu/drm/i915/intel_lrc.c | 6 ++---- drivers/gpu/drm/i915/intel_ringbuffer.c | 14 ++++++-------- drivers/gpu/drm/i915/intel_ringbuffer.h | 4 +--- 5 files changed, 9 insertions(+), 20 deletions(-)
drivers/gpu/drm/i915/i915_gem_context.c +0 -2
@@ -329,8 +329,6 @@ __create_hw_context(struct drm_i915_private *dev_priv, ctx->desc_template =default_desc_template (dev_priv, dev_priv->mm.aliasing_ppgtt); - ctx->ggtt_offset_bias = dev_priv->ggtt.pin_bias; -return ctx; err_pid:
drivers/gpu/drm/i915/i915_gem_context.h +0 -3
@@ -147,9 +147,6 @@ struct i915_gem_context {struct i915_sched_attr sched; -/** ggtt_offset_bias: placement restriction for context objects */ -u32 ggtt_offset_bias; -/** engine: per-engine logical HW state */ struct intel_context {struct i915_gem_context *gem_context;
drivers/gpu/drm/i915/intel_lrc.c +2 -4
@@ -1303,9 +1303,7 @@ static int __context_pin(struct i915_gem_context *ctx, struct i915_vma *vma) } flags =PIN_GLOBAL |PIN_HIGH ; -if (ctx->ggtt_offset_bias) - flags |=PIN_OFFSET_BIAS | ctx->ggtt_offset_bias; - + flags |=PIN_OFFSET_BIAS |i915_ggtt_pin_bias (vma);return i915_vma_pin (vma,0 ,0 , flags); }
@@ -1332,7 +1330,7 @@ __execlists_context_pin(struct intel_engine_cs *engine, goto unpin_vma; } - ret =intel_ring_pin (ce->ring, ctx->i915, ctx->ggtt_offset_bias); + ret =intel_ring_pin (ce->ring, ctx->i915);if (ret) goto unpin_map;
drivers/gpu/drm/i915/intel_ringbuffer.c +6 -8
@@ -1005,9 +1005,7 @@ i915_emit_bb_start(struct i915_request *rq, -int intel_ring_pin (struct intel_ring *ring, -struct drm_i915_private *i915, -unsigned int offset_bias) +int intel_ring_pin (struct intel_ring *ring,struct drm_i915_private *i915) {enum i915_map_type map =HAS_LLC (i915) ?I915_MAP_WB :I915_MAP_WC ;struct i915_vma *vma = ring->vma;
@@ -1017,10 +1015,11 @@ int intel_ring_pin(struct intel_ring *ring,GEM_BUG_ON (ring->vaddr); - flags =PIN_GLOBAL ; -if (offset_bias) - flags |=PIN_OFFSET_BIAS | offset_bias; + +/* Ring wraparound at offset 0 sometimes hangs. No idea why. */ + flags |=PIN_OFFSET_BIAS |i915_ggtt_pin_bias (vma); +if (vma->obj->stolen) flags |=PIN_MAPPABLE ;else
@@ -1408,8 +1407,7 @@ static int intel_init_ring_buffer(struct intel_engine_cs *engine) goto err; } -/* Ring wraparound at offset 0 sometimes hangs. No idea why. */ - err =intel_ring_pin (ring, engine->i915,I915_GTT_PAGE_SIZE ); + err =intel_ring_pin (ring, engine->i915);if (err) goto err_ring;
drivers/gpu/drm/i915/intel_ringbuffer.h +1 -3
@@ -797,9 +797,7 @@ struct intel_ring * intel_engine_create_ring(struct intel_engine_cs *engine, struct i915_timeline *timeline, int size); -int intel_ring_pin (struct intel_ring *ring, -struct drm_i915_private *i915, -unsigned int offset_bias); +int intel_ring_pin (struct intel_ring *ring,struct drm_i915_private *i915);void intel_ring_reset (struct intel_ring *ring,u32 tail);unsigned int intel_ring_update_space (struct intel_ring *ring);void intel_ring_unpin (struct intel_ring *ring);
Signature · 6 lines
2.17.1 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
PATCH v8 5/6 drm/i915: Add a fault injection point to WOPCM init
In reply to Jakub BartmińskiAdd a fault injection point in the WOPCM initialization path.
v4:
Move the injection inside the WOPCM init function.
--- drivers/gpu/drm/i915/intel_wopcm.c | 3 +++ 1 file changed, 3 insertions(+)
drivers/gpu/drm/i915/intel_wopcm.c +3 -0
@@ -168,6 +168,9 @@ int intel_wopcm_init(struct intel_wopcm *wopcm)GEM_BUG_ON (!wopcm->size); +if (i915_inject_load_failure ()) +return -E2BIG ; +if (guc_fw_size >= wopcm->size) {DRM_ERROR ("GuC FW (%uKiB) is too big to fit in WOPCM." , guc_fw_size /1024 );
Signature · 6 lines
2.17.1 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
PATCH v8 6/6 HAX enable GuC for CI
In reply to Jakub BartmińskiFrom: Michal Wajdeczko <[email protected]>
--- drivers/gpu/drm/i915/i915_params.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/gpu/drm/i915/i915_params.h +1 -1
@@ -46,7 +46,7 @@ struct drm_printer; param(int, disable_power_well, -1) \ param(int, enable_ips, 1) \ param(int, invert_brightness, 0) \ - param(int, enable_guc, 0) \ + param(int, enable_guc, -1) \ param(int, guc_log_level, -1) \ param(char *, guc_firmware_path, NULL) \param (char *, huc_firmware_path, NULL) \
Signature · 6 lines
2.17.1 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Patchwork
CI✗ Fi.CI.SPARSE: warning for series starting with [v8,1/6] drm/i915/guc: Avoid wasting memory on incorrect GuC pin bias
In reply to Jakub Bartmiński== Series Details ==
== Series Details ==
Series: series starting with [v8,1/6] drm/i915/guc: Avoid wasting memory on incorrect GuC pin bias
URL : https://patchwork.freedesktop.org/series/47352/
State : warning
== Summary ==
$ dim sparse origin/drm-tip Commit: drm/i915/guc: Avoid wasting memory on incorrect GuC pin bias Okay!
Commit: drm/i915/guc: Do not partition WOPCM if GuC is not used Okay!
Commit: drm/i915/guc: Move the pin bias value from GuC to GGTT +drivers/gpu/drm/i915/i915_gem_gtt.c:2938:26: warning: expression using sizeof(void)
Commit: drm/i915: Remove unnecessary ggtt_offset_bias from i915_gem_context Okay!
Commit: drm/i915: Add a fault injection point to WOPCM init Okay!
Commit: HAX enable GuC for CI
Okay!
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Patchwork
CI✗ Fi.CI.BAT: failure for series starting with [v8,1/6] drm/i915/guc: Avoid wasting memory on incorrect GuC pin bias
In reply to Jakub Bartmiński== Series Details ==
== Series Details ==
Series: series starting with [v8,1/6] drm/i915/guc: Avoid wasting memory on incorrect GuC pin bias
URL : https://patchwork.freedesktop.org/series/47352/
State : failure
== Summary ==
= CI Bug Log - changes from CI_DRM_4560 -> Patchwork_9792 =
== Summary - FAILURE ==
Serious unknown changes coming with Patchwork_9792 absolutely need to be verified manually.
If you think the reported changes have nothing to do with the changes introduced in Patchwork_9792, please notify your bug team to allow them to document this new failure mode, which will reduce false positives in CI.
External URL: https://patchwork.freedesktop.org/api/1.0/series/47352/revisions/1/mbox/
== Possible new issues ==
Here are the unknown changes that may have been introduced in Patchwork_9792:
=== IGT changes ===
==== Possible regressions ====
igt@drv_selftest@live_guc:
fi-kbl-7567u: PASS -> DMESG-WARN
fi-skl-gvtdvm: PASS -> DMESG-WARN
fi-whl-u: PASS -> DMESG-WARN
fi-kbl-7560u: PASS -> DMESG-WARN
fi-kbl-r: PASS -> DMESG-WARN
fi-kbl-x1275: PASS -> DMESG-WARN
fi-bxt-j4205: PASS -> DMESG-WARN
fi-cfl-s3: PASS -> DMESG-WARN
{fi-cfl-8109u}: PASS -> DMESG-WARN
fi-kbl-7500u: PASS -> DMESG-WARN
fi-cfl-8700k: PASS -> DMESG-WARN
igt@drv_selftest@live_hangcheck:
fi-cfl-8700k: PASS -> DMESG-FAIL
fi-cfl-s3: PASS -> DMESG-FAIL
fi-bxt-j4205: PASS -> DMESG-FAIL== Known issues ==
Here are the changes found in Patchwork_9792 that come from known issues:
=== IGT changes ===
==== Issues hit ====
igt@drv_selftest@live_guc:
fi-skl-guc: NOTRUN -> DMESG-WARN (fdo#107175, fdo#107258)
fi-skl-6600u: PASS -> DMESG-WARN (fdo#107175)
{fi-skl-iommu}: PASS -> DMESG-WARN (fdo#107175)
fi-skl-6260u: PASS -> DMESG-WARN (fdo#107175)
fi-skl-6700k2: PASS -> DMESG-WARN (fdo#107175)
fi-skl-6770hq: PASS -> DMESG-WARN (fdo#107175)
fi-skl-6700hq: PASS -> DMESG-WARN (fdo#107175)
==== Possible fixes ====
igt@drv_selftest@live_hangcheck:
fi-kbl-7567u: DMESG-FAIL (fdo#106947, fdo#106560) -> PASS
igt@kms_chamelium@dp-crc-fast:
fi-kbl-7500u: DMESG-FAIL (fdo#103841) -> PASS
==== Warnings ====
{igt@kms_psr@primary_page_flip}:
fi-cnl-psr: DMESG-FAIL (fdo#107372) -> DMESG-WARN (fdo#107372) {name}: This element is suppressed. This means it is ignored when computing
the status of the difference (SUCCESS, WARNING, or FAILURE).
fdo#103841 https://bugs.freedesktop.org/show_bug.cgi?id=103841
fdo#106560 https://bugs.freedesktop.org/show_bug.cgi?id=106560
fdo#106947 https://bugs.freedesktop.org/show_bug.cgi?id=106947
fdo#107175 https://bugs.freedesktop.org/show_bug.cgi?id=107175
fdo#107258 https://bugs.freedesktop.org/show_bug.cgi?id=107258
fdo#107372 https://bugs.freedesktop.org/show_bug.cgi?id=107372
== Participating hosts (51 -> 45) ==
Additional (1): fi-skl-guc
Missing (7): fi-ilk-m540 fi-bxt-dsi fi-hsw-4200u fi-byt-squawks fi-bsw-cyan fi-kbl-8809g fi-byt-clapper
== Build changes ==
* Linux: CI_DRM_4560 -> Patchwork_9792
CI_DRM_4560: b73c0ddef408783e556741ac9d3679b7d153e3e1 @ git://anongit.freedesktop.org/gfx-ci/linux
IGT_4576: bcb37a9b20eeec97f15fac2222408cc2e0b77631 @ git://anongit.freedesktop.org/xorg/app/intel-gpu-tools
Patchwork_9792: f1c277bde7196a3f9b11543bcecbe34005ec14d3 @ git://anongit.freedesktop.org/gfx-ci/linux
== Linux commits ==
f1c277bde719 HAX enable GuC for CI1b3ef9c29ca6 drm/i915: Add a fault injection point to WOPCM init c92666aa0b40 drm/i915: Remove unnecessary ggtt_offset_bias from i915_gem_context e16c9ffd7645 drm/i915/guc: Move the pin bias value from GuC to GGTT 38780f21284f drm/i915/guc: Do not partition WOPCM if GuC is not used 82db49c01af4 drm/i915/guc: Avoid wasting memory on incorrect GuC pin bias
== Logs ==
For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_9792/issues.html
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Re: ✗ Fi.CI.BAT: failure for series starting with [v8,1/6] drm/i915/guc: Avoid wasting memory on incorrect GuC pin bias
Quoting Patchwork (2018-07-27 15:54:25)
Quoted 38 lines
== Series Details ==
Series: series starting with [v8,1/6] drm/i915/guc: Avoid wasting memory on incorrect GuC pin bias
URL : https://patchwork.freedesktop.org/series/47352/
State : failure== Summary ==
= CI Bug Log - changes from
CI_DRM_4560->Patchwork_9792=== Summary - FAILURE ==
Serious unknown changes coming with
Patchwork_9792absolutely need to be verified manually.If you think the reported changes have nothing to do with the changes introduced in
Patchwork_9792, please notify your bug team to allow them to document this new failure mode, which will reduce false positives in CI.External URL: https://patchwork.freedesktop.org/api/1.0/series/47352/revisions/1/mbox/
== Possible new issues ==
Here are the unknown changes that may have been introduced in
Patchwork_9792:=== IGT changes ===
==== Possible regressions ==== igt@drv_selftest@live_guc: fi-kbl-7567u: PASS -> DMESG-WARN fi-skl-gvtdvm: PASS -> DMESG-WARN fi-whl-u: PASS -> DMESG-WARN fi-kbl-7560u: PASS -> DMESG-WARN fi-kbl-r: PASS -> DMESG-WARN fi-kbl-x1275: PASS -> DMESG-WARN fi-bxt-j4205: PASS -> DMESG-WARN fi-cfl-s3: PASS -> DMESG-WARN
Quoted 8 lines
{fi-cfl-8109u}: PASS -> DMESG-WARN
fi-kbl-7500u: PASS -> DMESG-WARN
fi-cfl-8700k: PASS -> DMESG-WARN
igt@drv_selftest@live_hangcheck:
fi-cfl-8700k: PASS -> DMESG-FAIL
fi-cfl-s3: PASS -> DMESG-FAIL
fi-bxt-j4205: PASS -> DMESG-FAILNothing unexpected.
Pushed, thanks for the patches and review.
-Chris
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx