Skip to contentSkip to conversation

Enable HDA Codec support on Intel Platforms

PATCH Superseded Pierre-Louis Bossart 3 participants 15 messages Jul 27, 2018 – Aug 1, 2018

Subsystems (3)

v5 of 8 Superseded Latest is v8 →

lore
Share & tools
lore
#0 lore raw

v5 cover Enable HDA Codec support on Intel Platforms

Many Intel platforms (SKL, KBL) etc. in the market supports enhanced audio capabilities which also includes DSP processing. The default HDaudio legacy driver does not allow for the use of the DSP, this patch set makes it possible while reusing existing code for HDAudio codecs and without significant changes to the legacy driver.

This v5 is based on Takashi's topic/drm_audio_component merged on top on Marks' for-next branch - the merge is not included here.

Tests were run successfully on multiple platforms (Dell XPS13, KBL NUC, APL NUC and LeafHill reference board). Both the HDaudio and HDMI outputs were tested.

Credits: all the initial code was written by Rakesh Ughreja, the rebase to broonie/for-next, cleanups and additional tests were done by Pierre Bossart.

TODO in future update: fix the HDMI jack detection which only works after the mixer values are set, which isn't practical for headless devices always connected (this is a problem in the hdac_hdmi codec that was present before this series was submitted)

Changes v5 (comments from Vinod)
- fix SPDIF style across patches
- patch 1: update commit message to remove reference to "fix"
- patch 3: remove platform name assignment and Xmas tree style
- patch 7: simplify error handling, add missing _put() on errors, remove tests on ops, add switch statement, fix alignment
- patch 8: fix indentation issues, use bool instead of tristate

Changes v4:
- rebase/update on Takashi's topic/drm_audio_component branch
- changes in the HDaudio detection to avoid adding a fake ACPI ID
- new Kconfigs to control HDaudio detection

Changes v3:
- port to component model
- additional tests on ApolloLake and KabyLake NUC devices
- cleanups (alignment, typos, etc)

Changes v2:
- Resolved review comments and rebased to latest kernel.
- added module load support for codec drivers.

Pierre-Louis Bossart (2):
ASoC: Intel: common: add table for HDA-based platforms
ASoC: Intel: Skylake: add option to control HDAudio + DSP usage

Rakesh Ughreja (6):
ASoC: Intel: Skylake: extend widget handling
ASoC: Intel: Boards: Machine driver for SKL+ w/ HDAudio codecs
ASoC: Intel: Skylake: use HDAudio if ACPI enumeration fails
ASoC: Intel: Skylake: add HDA BE DAIs
ASoC: Intel: Skylake: use hda_bus instead of hdac_bus
ASoC: hdac_hda: add asoc extension for legacy HDA codec drivers

 include/sound/soc-acpi-intel-match.h              |   6 +
 sound/pci/hda/hda_bind.c                          |  12 +
 sound/soc/codecs/Kconfig                          |   5 +
 sound/soc/codecs/Makefile                         |   2 +
 sound/soc/codecs/hdac_hda.c                       | 487 ++++++++++++++++++++++
 sound/soc/codecs/hdac_hda.h                       |  24 ++
 sound/soc/intel/Kconfig                           |  19 +
 sound/soc/intel/boards/Kconfig                    |   9 +
 sound/soc/intel/boards/Makefile                   |   2 +
 sound/soc/intel/boards/skl_hda_dsp_common.c       | 130 ++++++
 sound/soc/intel/boards/skl_hda_dsp_common.h       |  37 ++
 sound/soc/intel/boards/skl_hda_dsp_generic.c      | 176 ++++++++
 sound/soc/intel/common/Makefile                   |   3 +-
 sound/soc/intel/common/soc-acpi-intel-hda-match.c |  40 ++
 sound/soc/intel/skylake/skl-pcm.c                 |  70 +++-
 sound/soc/intel/skylake/skl-topology.c            |   3 +
 sound/soc/intel/skylake/skl.c                     | 100 ++++-
 sound/soc/intel/skylake/skl.h                     |  12 +-
 18 files changed, 1111 insertions(+), 26 deletions(-)
 create mode 100644 sound/soc/codecs/hdac_hda.c
 create mode 100644 sound/soc/codecs/hdac_hda.h
 create mode 100644 sound/soc/intel/boards/skl_hda_dsp_common.c
 create mode 100644 sound/soc/intel/boards/skl_hda_dsp_common.h
 create mode 100644 sound/soc/intel/boards/skl_hda_dsp_generic.c
 create mode 100644 sound/soc/intel/common/soc-acpi-intel-hda-match.c
Signature · 1 line
2.14.1
#1 lore raw

PATCH v5 1/8 ASoC: Intel: Skylake: extend widget handling

From: Rakesh Ughreja <[email protected]>

include DAPM Mux and output widgets into the list.

---
 sound/soc/intel/skylake/skl-topology.c | 3 +++
 1 file changed, 3 insertions(+)
sound/soc/intel/skylake/skl-topology.c +3 -0
index 76dde12cc2bb..2620d77729c5 100644
@@ -108,6 +108,9 @@ static int is_skl_dsp_widget_type(struct snd_soc_dapm_widget *w,
 	case snd_soc_dapm_aif_out:
 	case snd_soc_dapm_dai_out:
 	case snd_soc_dapm_switch:
+	case snd_soc_dapm_output:
+	case snd_soc_dapm_mux:
+
 		return false;
 	default:
 		return true;
Signature · 1 line
2.14.1
maintainer
#2 lore raw

Re: [PATCH v5 1/8] ASoC: Intel: Skylake: extend widget handling

Quoted 3 lines · Pierre-Louis Bossart

From: Rakesh Ughreja <[email protected]>

include DAPM Mux and output widgets into the list.

Please don't resubmit patches that have already been applied, you should submit patches against current code in the tree you're expecting things to be applied to. If any updates are needed to a patch that's already been applied you should submit incremental patches which make those updates. This avoids having to change published git commits which could cause problems for people working against git.

#3 lore raw

PATCH v5 2/8 ASoC: Intel: common: add table for HDA-based platforms

In reply to Pierre-Louis Bossart

Expose a table containing machine driver information for HDAudio-based platforms handled by ASoC on Intel hardware.

We only set constant values that are valid across multiple platforms. The firmware name used by the DSP will be set dynamically for each platform.

The table is made of a single entry for now, if we need more complicated set-up where HDAudio is mixed with ACPI-enumerated devices (I2C, SoundWire) then we'd expect the differentiation to be handled through information provided by the BIOS (as done for KBL Chromebooks).

---
 include/sound/soc-acpi-intel-match.h              |  6 ++++
 sound/soc/intel/common/Makefile                   |  3 +-
 sound/soc/intel/common/soc-acpi-intel-hda-match.c | 40 +++++++++++++++++++++++
 3 files changed, 48 insertions(+), 1 deletion(-)
 create mode 100644 sound/soc/intel/common/soc-acpi-intel-hda-match.c
include/sound/soc-acpi-intel-match.h +6 -0
index bb1d24b703fb..f48f59e5b7b0 100644
@@ -25,4 +25,10 @@ extern struct snd_soc_acpi_mach snd_soc_acpi_intel_bxt_machines[];
 extern struct snd_soc_acpi_mach snd_soc_acpi_intel_glk_machines[];
 extern struct snd_soc_acpi_mach snd_soc_acpi_intel_cnl_machines[];
 
+/*
+ * generic table used for HDA codec-based platforms, possibly with
+ * additional ACPI-enumerated codecs
+ */
+extern struct snd_soc_acpi_mach snd_soc_acpi_intel_hda_machines[];
+
 #endif
sound/soc/intel/common/Makefile +2 -1
index 915a34cdc8ac..c1f50a079d34 100644
@@ -7,7 +7,8 @@ snd-soc-acpi-intel-match-objs := soc-acpi-intel-byt-match.o soc-acpi-intel-cht-m
 	soc-acpi-intel-hsw-bdw-match.o \
 	soc-acpi-intel-skl-match.o soc-acpi-intel-kbl-match.o \
 	soc-acpi-intel-bxt-match.o soc-acpi-intel-glk-match.o \
-	soc-acpi-intel-cnl-match.o
+	soc-acpi-intel-cnl-match.o \
+	soc-acpi-intel-hda-match.o
 
 obj-$(CONFIG_SND_SOC_INTEL_SST) += snd-soc-sst-dsp.o snd-soc-sst-ipc.o
 obj-$(CONFIG_SND_SOC_INTEL_SST_ACPI) += snd-soc-sst-acpi.o
sound/soc/intel/common/soc-acpi-intel-hda-match.c new file +40 -0
new file mode 100644
index 000000000000..40ce8d4e9b22
@@ -0,0 +1,40 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * soc-apci-intel-hda-match.c - tables and support for HDA+ACPI enumeration.
+ *
+ * Copyright (c) 2018, Intel Corporation.
+ *
+ */
+
+#include <sound/soc-acpi.h>
+#include <sound/soc-acpi-intel-match.h>
+#include "../skylake/skl.h"
+
+static struct skl_machine_pdata hda_pdata = {
+	.use_tplg_pcm = true,
+};
+
+struct snd_soc_acpi_mach snd_soc_acpi_intel_hda_machines[] = {
+	{
+		/* .id is not used in this file */
+		.drv_name = "skl_hda_dsp_generic",
+
+		/* .fw_filename is dynamically set in skylake driver */
+
+		/* .sof_fw_filename is dynamically set in sof/intel driver */
+
+		.sof_tplg_filename = "intel/sof-hda-generic.tplg",
+
+		/*
+		 * .machine_quirk and .quirk_data are not used here but
+		 * can be used if we need a more complicated machine driver
+		 * combining HDA+other device (e.g. DMIC).
+		 */
+		.pdata = &hda_pdata,
+	},
+	{},
+};
+EXPORT_SYMBOL_GPL(snd_soc_acpi_intel_hda_machines);
+
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("Intel Common ACPI Match module");
Signature · 1 line
2.14.1
#4 lore raw

PATCH v5 3/8 ASoC: Intel: Boards: Machine driver for SKL+ w/ HDAudio codecs

In reply to Pierre-Louis Bossart

From: Rakesh Ughreja <[email protected]>

Add machine driver for Intel platforms (SKL/KBL/BXT/APL) with HDA and iDisp codecs. This patch adds support for only iDisp (HDMI/DP) codec. In the following patches support for HDA codecs will be added.

This should work for other Intel platforms as well e.g. GLK,CNL however this series is not tested on all the platforms.

---
 sound/soc/intel/boards/Kconfig               |   8 ++
 sound/soc/intel/boards/Makefile              |   2 +
 sound/soc/intel/boards/skl_hda_dsp_common.c  | 106 ++++++++++++++++++++
 sound/soc/intel/boards/skl_hda_dsp_common.h  |  37 +++++++
 sound/soc/intel/boards/skl_hda_dsp_generic.c | 138 +++++++++++++++++++++++++++
 sound/soc/intel/skylake/skl.h                |   2 +
 6 files changed, 293 insertions(+)
 create mode 100644 sound/soc/intel/boards/skl_hda_dsp_common.c
 create mode 100644 sound/soc/intel/boards/skl_hda_dsp_common.h
 create mode 100644 sound/soc/intel/boards/skl_hda_dsp_generic.c
sound/soc/intel/boards/Kconfig +8 -0
index cccda87f4b34..0f0d57859555 100644
@@ -279,6 +279,14 @@ config SND_SOC_INTEL_KBL_DA7219_MAX98357A_MACH
 	  This adds support for ASoC Onboard Codec I2S machine driver. This will
 	  create an alsa sound card for DA7219 + MAX98357A I2S audio codec.
 	  Say Y if you have such a device.
+
+config SND_SOC_INTEL_SKL_HDA_DSP_GENERIC_MACH
+	tristate "SKL/KBL/BXT/APL with HDA Codecs"
+	select SND_SOC_HDAC_HDMI
+	help
+	  This adds support for ASoC machine driver for Intel platforms
+	  SKL/KBL/BXT/APL with iDisp, HDA audio codecs.
+          Say Y or m if you have such a device. This is a recommended option.
 	  If unsure select "N".
 
 config SND_SOC_INTEL_GLK_RT5682_MAX98357A_MACH
sound/soc/intel/boards/Makefile +2 -0
index 87ef8b4058e5..6e88373cbe35 100644
@@ -20,6 +20,7 @@ snd-soc-kbl_da7219_max98357a-objs := kbl_da7219_max98357a.o
 snd-soc-kbl_rt5663_max98927-objs := kbl_rt5663_max98927.o
 snd-soc-kbl_rt5663_rt5514_max98927-objs := kbl_rt5663_rt5514_max98927.o
 snd-soc-skl_rt286-objs := skl_rt286.o
+snd-soc-skl_hda_dsp-objs := skl_hda_dsp_generic.o skl_hda_dsp_common.o
 snd-skl_nau88l25_max98357a-objs := skl_nau88l25_max98357a.o
 snd-soc-skl_nau88l25_ssm4567-objs := skl_nau88l25_ssm4567.o
 
@@ -46,3 +47,4 @@ obj-$(CONFIG_SND_SOC_INTEL_KBL_RT5663_RT5514_MAX98927_MACH) += snd-soc-kbl_rt566
 obj-$(CONFIG_SND_SOC_INTEL_SKL_RT286_MACH) += snd-soc-skl_rt286.o
 obj-$(CONFIG_SND_SOC_INTEL_SKL_NAU88L25_MAX98357A_MACH) += snd-skl_nau88l25_max98357a.o
 obj-$(CONFIG_SND_SOC_INTEL_SKL_NAU88L25_SSM4567_MACH) += snd-soc-skl_nau88l25_ssm4567.o
+obj-$(CONFIG_SND_SOC_INTEL_SKL_HDA_DSP_GENERIC_MACH) += snd-soc-skl_hda_dsp.o
sound/soc/intel/boards/skl_hda_dsp_common.c new file +106 -0

106 lines not on this page · raw message

sound/soc/intel/boards/skl_hda_dsp_common.h new file +37 -0
new file mode 100644
index 000000000000..04149b0dcec4
@@ -0,0 +1,37 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright(c) 2015-18 Intel Corporation.
+ */
+
+/*
+ * This file defines data structures used in Machine Driver for Intel
+ * platforms with HDA Codecs.
+ */
+
+#ifndef __SOUND_SOC_HDA_DSP_COMMON_H
+#define __SOUND_SOC_HDA_DSP_COMMON_H
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <sound/core.h>
+#include <sound/jack.h>
+
+#define HDA_DSP_MAX_BE_DAI_LINKS 3
+
+struct skl_hda_hdmi_pcm {
+	struct list_head head;
+	struct snd_soc_dai *codec_dai;
+	struct snd_soc_jack hdmi_jack;
+	int device;
+};
+
+struct skl_hda_private {
+	struct list_head hdmi_pcm_list;
+	int pcm_count;
+	const char *platform_name;
+};
+
+extern struct snd_soc_dai_link skl_hda_be_dai_links[HDA_DSP_MAX_BE_DAI_LINKS];
+int skl_hda_hdmi_jack_init(struct snd_soc_card *card);
+int skl_hda_hdmi_add_pcm(struct snd_soc_card *card, int device);
+
+#endif /* __SOUND_SOC_HDA_DSP_COMMON_H */
sound/soc/intel/boards/skl_hda_dsp_generic.c new file +138 -0

138 lines not on this page · raw message

sound/soc/intel/skylake/skl.h +2 -0
index 78aa8bdcb619..4105a9371b64 100644
@@ -117,6 +117,8 @@ struct skl_dma_params {
 struct skl_machine_pdata {
 	u32 dmic_num;
 	bool use_tplg_pcm; /* use dais and dai links from topology */
+	const char *platform;
+	u32 codec_mask;
 };
 
 struct skl_dsp_ops {
Signature · 1 line
2.14.1
maintainer
#5 lore raw

Re: [PATCH v5 3/8] ASoC: Intel: Boards: Machine driver for SKL+ w/ HDAudio codecs

sound/soc/intel/boards/skl_hda_dsp_common.c line 4

Quoted 9 lines · Pierre-Louis Bossart

new file mode 100644
index 000000000000..b2a9a6c6b147

sound/soc/intel/boards/skl_hda_dsp_common.c new file +4 -0
@@ -0,0 +1,106 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright(c) 2015-18 Intel Corporation.
+ */

Please make the entire comment a C++ one in the C files so it looks more intentional.

sound/soc/intel/boards/skl_hda_dsp_common.c line 34

Quoted 13 lines
sound/soc/intel/boards/skl_hda_dsp_common.c new file +13 -0
+int skl_hda_hdmi_add_pcm(struct snd_soc_card *card, int device)
+{
+	struct skl_hda_private *ctx = snd_soc_card_get_drvdata(card);
+	struct skl_hda_hdmi_pcm *pcm;
+	char dai_name[NAME_SIZE];
+	static int i = 1;	/* hdmi codec dai name starts from index 1 */
+
+	pcm = devm_kzalloc(card->dev, sizeof(*pcm), GFP_KERNEL);
+	if (!pcm)
+		return -ENOMEM;
+
+	snprintf(dai_name, sizeof(dai_name), "intel-hdmi-hifi%d", i++);
+	pcm->codec_dai = snd_soc_card_get_codec_dai(card, dai_name);

I'm confused, i is unconditionally 1 before the print and we then increment it even though we never reference i again?

sound/soc/intel/boards/skl_hda_dsp_common.c line 23

Quoted 6 lines
sound/soc/intel/boards/skl_hda_dsp_common.c new file +6 -0
+	if (codec_count == 1 && pdata->codec_mask & IDISP_CODEC_MASK) {
+		num_links = IDISP_DAI_COUNT;
+		num_route = IDISP_ROUTE_COUNT;
+	} else {
+		return -EINVAL;
+	}

A warning about unsupported configurations might be nice if the code ever gets executed on some shiny new laptop.

#6 lore raw

PATCH v5 4/8 ASoC: Intel: Skylake: use HDAudio if ACPI enumeration fails

In reply to Pierre-Louis Bossart

From: Rakesh Ughreja <[email protected]>

When no I2S based codec entries are found in the BIOS, check if there are any HDA codecs detected on the bus. Based on the number of codecs found take appropriate action in machine driver. If there are two HDA codecs i.e. iDisp + HDA found on the bus, register DAIs and DAI links for both. If only one codec i.e. iDisp is found then load only iDisp machine driver.

---
 sound/soc/intel/skylake/skl.c | 38 +++++++++++++++++++++++++++++++++-----
 1 file changed, 33 insertions(+), 5 deletions(-)
sound/soc/intel/skylake/skl.c +33 -5
index dce649485649..c83194de4aed 100644
@@ -472,6 +472,25 @@ static struct skl_ssp_clk skl_ssp_clks[] = {
 						{.name = "ssp5_sclkfs"},
 };
 
+static struct snd_soc_acpi_mach *skl_find_hda_machine(struct skl *skl,
+					struct snd_soc_acpi_mach *machines)
+{
+	struct hdac_bus *bus = skl_to_bus(skl);
+	struct snd_soc_acpi_mach *mach;
+
+	/* check if we have any codecs detected on bus */
+	if (bus->codec_mask == 0)
+		return NULL;
+
+	/* point to common table */
+	mach = snd_soc_acpi_intel_hda_machines;
+
+	/* all entries in the machine table use the same firmware */
+	mach->fw_filename = machines->fw_filename;
+
+	return mach;
+}
+
 static int skl_find_machine(struct skl *skl, void *driver_data)
 {
 	struct hdac_bus *bus = skl_to_bus(skl);
@@ -479,9 +498,13 @@ static int skl_find_machine(struct skl *skl, void *driver_data)
 	struct skl_machine_pdata *pdata;
 
 	mach = snd_soc_acpi_find_machine(mach);
-	if (mach == NULL) {
-		dev_err(bus->dev, "No matching machine driver found\n");
-		return -ENODEV;
+	if (!mach) {
+		dev_dbg(bus->dev, "No matching I2S machine driver found\n");
+		mach = skl_find_hda_machine(skl, driver_data);
+		if (!mach) {
+			dev_err(bus->dev, "No matching machine driver found\n");
+			return -ENODEV;
+		}
 	}
 
 	skl->mach = mach;
@@ -498,8 +521,9 @@ static int skl_find_machine(struct skl *skl, void *driver_data)
 
 static int skl_machine_device_register(struct skl *skl)
 {
-	struct hdac_bus *bus = skl_to_bus(skl);
 	struct snd_soc_acpi_mach *mach = skl->mach;
+	struct hdac_bus *bus = skl_to_bus(skl);
+	struct skl_machine_pdata *pdata;
 	struct platform_device *pdev;
 	int ret;
 
@@ -516,8 +540,12 @@ static int skl_machine_device_register(struct skl *skl)
 		return -EIO;
 	}
 
-	if (mach->pdata)
+	if (mach->pdata) {
+		pdata = (struct skl_machine_pdata *)mach->pdata;
+		pdata->platform = dev_name(bus->dev);
+		pdata->codec_mask = bus->codec_mask;
 		dev_set_drvdata(&pdev->dev, mach->pdata);
+	}
 
 	skl->i2s_dev = pdev;
 
Signature · 1 line
2.14.1
#7 lore raw

PATCH v5 5/8 ASoC: Intel: Skylake: add HDA BE DAIs

In reply to Pierre-Louis Bossart

From: Rakesh Ughreja <[email protected]>

Add support for HDA BE DAIs in SKL platform driver.

---
 sound/soc/intel/skylake/skl-pcm.c | 70 ++++++++++++++++++++++++++++++++-------
 1 file changed, 58 insertions(+), 12 deletions(-)
sound/soc/intel/skylake/skl-pcm.c +58 -12
index 823e39103edd..00b7a91b18c9 100644
@@ -32,6 +32,7 @@
 #define HDA_MONO 1
 #define HDA_STEREO 2
 #define HDA_QUAD 4
+#define HDA_MAX 8
 
 static const struct snd_pcm_hardware azx_pcm_hw = {
 	.info =			(SNDRV_PCM_INFO_MMAP |
@@ -569,7 +570,10 @@ static int skl_link_hw_params(struct snd_pcm_substream *substream,
 	stream_tag = hdac_stream(link_dev)->stream_tag;
 
 	/* set the stream tag in the codec dai dma params  */
-	snd_soc_dai_set_tdm_slot(codec_dai, stream_tag, 0, 0, 0);
+	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
+		snd_soc_dai_set_tdm_slot(codec_dai, stream_tag, 0, 0, 0);
+	else
+		snd_soc_dai_set_tdm_slot(codec_dai, 0, stream_tag, 0, 0);
 
 	p_params.s_fmt = snd_pcm_format_width(params_format(params));
 	p_params.ch = params_channels(params);
@@ -995,21 +999,63 @@ static struct snd_soc_dai_driver skl_platform_dai[] = {
 	},
 },
 {
-	.name = "HD-Codec Pin",
+	.name = "Analog CPU DAI",
 	.ops = &skl_link_dai_ops,
 	.playback = {
-		.stream_name = "HD-Codec Tx",
-		.channels_min = HDA_STEREO,
-		.channels_max = HDA_STEREO,
-		.rates = SNDRV_PCM_RATE_48000,
-		.formats = SNDRV_PCM_FMTBIT_S16_LE,
+		.stream_name = "Analog CPU Playback",
+		.channels_min = HDA_MONO,
+		.channels_max = HDA_MAX,
+		.rates = SNDRV_PCM_RATE_8000_192000,
+		.formats = SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S24_LE |
+			SNDRV_PCM_FMTBIT_S32_LE,
 	},
 	.capture = {
-		.stream_name = "HD-Codec Rx",
-		.channels_min = HDA_STEREO,
-		.channels_max = HDA_STEREO,
-		.rates = SNDRV_PCM_RATE_48000,
-		.formats = SNDRV_PCM_FMTBIT_S16_LE,
+		.stream_name = "Analog CPU Capture",
+		.channels_min = HDA_MONO,
+		.channels_max = HDA_MAX,
+		.rates = SNDRV_PCM_RATE_8000_192000,
+		.formats = SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S24_LE |
+			SNDRV_PCM_FMTBIT_S32_LE,
+	},
+},
+{
+	.name = "Alt Analog CPU DAI",
+	.ops = &skl_link_dai_ops,
+	.playback = {
+		.stream_name = "Alt Analog CPU Playback",
+		.channels_min = HDA_MONO,
+		.channels_max = HDA_MAX,
+		.rates = SNDRV_PCM_RATE_8000_192000,
+		.formats = SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S24_LE |
+			SNDRV_PCM_FMTBIT_S32_LE,
+	},
+	.capture = {
+		.stream_name = "Alt Analog CPU Capture",
+		.channels_min = HDA_MONO,
+		.channels_max = HDA_MAX,
+		.rates = SNDRV_PCM_RATE_8000_192000,
+		.formats = SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S24_LE |
+			SNDRV_PCM_FMTBIT_S32_LE,
+	},
+},
+{
+	.name = "Digital CPU DAI",
+	.ops = &skl_link_dai_ops,
+	.playback = {
+		.stream_name = "Digital CPU Playback",
+		.channels_min = HDA_MONO,
+		.channels_max = HDA_MAX,
+		.rates = SNDRV_PCM_RATE_8000_192000,
+		.formats = SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S24_LE |
+			SNDRV_PCM_FMTBIT_S32_LE,
+	},
+	.capture = {
+		.stream_name = "Digital CPU Capture",
+		.channels_min = HDA_MONO,
+		.channels_max = HDA_MAX,
+		.rates = SNDRV_PCM_RATE_8000_192000,
+		.formats = SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S24_LE |
+			SNDRV_PCM_FMTBIT_S32_LE,
 	},
 },
 };
Signature · 1 line
2.14.1
#8 lore raw

PATCH v5 6/8 ASoC: Intel: Skylake: use hda_bus instead of hdac_bus

In reply to Pierre-Louis Bossart

From: Rakesh Ughreja <[email protected]>

Use hda_bus instead of hdac_bus in the SKL ASoC platform driver to enable reuse of legacy HDA codec drivers.

---
 sound/soc/intel/skylake/skl.c | 10 +++++++++-
 sound/soc/intel/skylake/skl.h | 10 +++++++---
 2 files changed, 16 insertions(+), 4 deletions(-)
sound/soc/intel/skylake/skl.c +9 -1
index c83194de4aed..57af55ca785e 100644
@@ -36,6 +36,7 @@
 #include "skl.h"
 #include "skl-sst-dsp.h"
 #include "skl-sst-ipc.h"
+#include "../../../pci/hda/hda_codec.h"
 
 /*
  * initialize the PCI registers
@@ -673,7 +674,7 @@ static int probe_codec(struct hdac_bus *bus, int addr)
 	mutex_unlock(&bus->cmd_mutex);
 	if (res == -1)
 		return -EIO;
-	dev_dbg(bus->dev, "codec #%d probed OK\n", addr);
+	dev_dbg(bus->dev, "codec #%d probed OK: %x\n", addr, res);
 
 	hdev = devm_kzalloc(&skl->pci->dev, sizeof(*hdev), GFP_KERNEL);
 	if (!hdev)
@@ -816,6 +817,7 @@ static int skl_create(struct pci_dev *pci,
 {
 	struct skl *skl;
 	struct hdac_bus *bus;
+	struct hda_bus *hbus;
 
 	int err;
 
@@ -831,6 +833,7 @@ static int skl_create(struct pci_dev *pci,
 		return -ENOMEM;
 	}
 
+	hbus = skl_to_hbus(skl);
 	bus = skl_to_bus(skl);
 	snd_hdac_ext_bus_init(bus, &pci->dev, &bus_core_ops, io_ops, NULL);
 	bus->use_posbuf = 1;
@@ -838,6 +841,11 @@ static int skl_create(struct pci_dev *pci,
 	INIT_WORK(&skl->probe_work, skl_probe_work);
 	bus->bdl_pos_adj = 0;
 
+	mutex_init(&hbus->prepare_mutex);
+	hbus->pci = pci;
+	hbus->mixer_assigned = -1;
+	hbus->modelname = "sklbus";
+
 	*rskl = skl;
 
 	return 0;
sound/soc/intel/skylake/skl.h +7 -3
index 4105a9371b64..803cce47ffb2 100644
@@ -26,6 +26,7 @@
 #include <sound/soc.h>
 #include "skl-nhlt.h"
 #include "skl-ssp-clk.h"
+#include "../../../pci/hda/hda_codec.h"
 
 #define SKL_SUSPEND_DELAY 2000
 
@@ -71,7 +72,7 @@ struct skl_fw_config {
 };
 
 struct skl {
-	struct hdac_bus hbus;
+	struct hda_bus hbus;
 	struct pci_dev *pci;
 
 	unsigned int init_done:1; /* delayed init status */
@@ -105,8 +106,11 @@ struct skl {
 	struct snd_soc_acpi_mach *mach;
 };
 
-#define skl_to_bus(s)  (&(s)->hbus)
-#define bus_to_skl(bus) container_of(bus, struct skl, hbus)
+#define skl_to_bus(s)  (&(s)->hbus.core)
+#define bus_to_skl(bus) container_of(bus, struct skl, hbus.core)
+
+#define skl_to_hbus(s) (&(s)->hbus)
+#define hbus_to_skl(hbus) container_of((hbus), struct skl, (hbus))
 
 /* to pass dai dma data */
 struct skl_dma_params {
Signature · 1 line
2.14.1
#9 lore raw

PATCH v5 7/8 ASoC: hdac_hda: add asoc extension for legacy HDA codec drivers

In reply to Pierre-Louis Bossart

From: Rakesh Ughreja <[email protected]>

This patch adds a kernel module which is used by the legacy HDA codec drivers as library. This implements hdac_ext_bus_ops to enable the reuse of legacy HDA codec drivers with ASoC platform drivers.

---
 sound/pci/hda/hda_bind.c                     |  12 +
 sound/soc/codecs/Kconfig                     |   5 +
 sound/soc/codecs/Makefile                    |   2 +
 sound/soc/codecs/hdac_hda.c                  | 487 +++++++++++++++++++++++++++
 sound/soc/codecs/hdac_hda.h                  |  24 ++
 sound/soc/intel/boards/Kconfig               |   1 +
 sound/soc/intel/boards/skl_hda_dsp_common.c  |  24 ++
 sound/soc/intel/boards/skl_hda_dsp_common.h  |   2 +-
 sound/soc/intel/boards/skl_hda_dsp_generic.c |  38 +++
 sound/soc/intel/skylake/skl.c                |  47 ++-
 10 files changed, 637 insertions(+), 5 deletions(-)
 create mode 100644 sound/soc/codecs/hdac_hda.c
 create mode 100644 sound/soc/codecs/hdac_hda.h
sound/pci/hda/hda_bind.c +12 -0
index d361bb77ca00..b1440a6c515f 100644
@@ -81,6 +81,12 @@ static int hda_codec_driver_probe(struct device *dev)
 	hda_codec_patch_t patch;
 	int err;
 
+	if (codec->bus->core.ext_ops) {
+		if (WARN_ON(!codec->bus->core.ext_ops->hdev_attach))
+			return -EINVAL;
+		return codec->bus->core.ext_ops->hdev_attach(&codec->core);
+	}
+
 	if (WARN_ON(!codec->preset))
 		return -EINVAL;
 
@@ -134,6 +140,12 @@ static int hda_codec_driver_remove(struct device *dev)
 {
 	struct hda_codec *codec = dev_to_hda_codec(dev);
 
+	if (codec->bus->core.ext_ops) {
+		if (WARN_ON(!codec->bus->core.ext_ops->hdev_detach))
+			return -EINVAL;
+		return codec->bus->core.ext_ops->hdev_detach(&codec->core);
+	}
+
 	if (codec->patch_ops.free)
 		codec->patch_ops.free(codec);
 	snd_hda_codec_cleanup_for_unbind(codec);
sound/soc/codecs/Kconfig +5 -0
index efb095dbcd71..bf0b949eb7e8 100644
@@ -82,6 +82,7 @@ config SND_SOC_ALL_CODECS
 	select SND_SOC_ES7241
 	select SND_SOC_GTM601
 	select SND_SOC_HDAC_HDMI
+	select SND_SOC_HDAC_HDA
 	select SND_SOC_ICS43432
 	select SND_SOC_INNO_RK3036
 	select SND_SOC_ISABELLE if I2C
@@ -615,6 +616,10 @@ config SND_SOC_HDAC_HDMI
 	select SND_PCM_ELD
 	select HDMI
 
+config SND_SOC_HDAC_HDA
+	tristate
+	select SND_HDA
+
 config SND_SOC_ICS43432
 	tristate
 
sound/soc/codecs/Makefile +2 -0
index 7ae7c85e8219..3046b33ca9d3 100644
@@ -78,6 +78,7 @@ snd-soc-es8328-i2c-objs := es8328-i2c.o
 snd-soc-es8328-spi-objs := es8328-spi.o
 snd-soc-gtm601-objs := gtm601.o
 snd-soc-hdac-hdmi-objs := hdac_hdmi.o
+snd-soc-hdac-hda-objs := hdac_hda.o
 snd-soc-ics43432-objs := ics43432.o
 snd-soc-inno-rk3036-objs := inno_rk3036.o
 snd-soc-isabelle-objs := isabelle.o
@@ -338,6 +339,7 @@ obj-$(CONFIG_SND_SOC_ES8328_I2C)+= snd-soc-es8328-i2c.o
 obj-$(CONFIG_SND_SOC_ES8328_SPI)+= snd-soc-es8328-spi.o
 obj-$(CONFIG_SND_SOC_GTM601)    += snd-soc-gtm601.o
 obj-$(CONFIG_SND_SOC_HDAC_HDMI) += snd-soc-hdac-hdmi.o
+obj-$(CONFIG_SND_SOC_HDAC_HDA) += snd-soc-hdac-hda.o
 obj-$(CONFIG_SND_SOC_ICS43432)	+= snd-soc-ics43432.o
 obj-$(CONFIG_SND_SOC_INNO_RK3036)	+= snd-soc-inno-rk3036.o
 obj-$(CONFIG_SND_SOC_ISABELLE)	+= snd-soc-isabelle.o
sound/soc/codecs/hdac_hda.c new file +487 -0

487 lines not on this page · raw message

sound/soc/codecs/hdac_hda.h new file +24 -0
new file mode 100644
index 000000000000..e444ef593360
@@ -0,0 +1,24 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright(c) 2015-18 Intel Corporation.
+ */
+
+#ifndef __HDAC_HDA_H__
+#define __HDAC_HDA_H__
+
+struct hdac_hda_pcm {
+	int stream_tag[2];
+};
+
+struct hdac_hda_priv {
+	struct hda_codec codec;
+	struct hdac_hda_pcm pcm[2];
+};
+
+#define hdac_to_hda_priv(_hdac) \
+			container_of(_hdac, struct hdac_hda_priv, codec.core)
+#define hdac_to_hda_codec(_hdac) container_of(_hdac, struct hda_codec, core)
+
+struct hdac_ext_bus_ops *snd_soc_hdac_hda_get_ops(void);
+
+#endif /* __HDAC_HDA_H__ */
sound/soc/intel/boards/Kconfig +1 -0
index 0f0d57859555..88e4b4284738 100644
@@ -283,6 +283,7 @@ config SND_SOC_INTEL_KBL_DA7219_MAX98357A_MACH
 config SND_SOC_INTEL_SKL_HDA_DSP_GENERIC_MACH
 	tristate "SKL/KBL/BXT/APL with HDA Codecs"
 	select SND_SOC_HDAC_HDMI
+	select SND_SOC_HDAC_HDA
 	help
 	  This adds support for ASoC machine driver for Intel platforms
 	  SKL/KBL/BXT/APL with iDisp, HDA audio codecs.
sound/soc/intel/boards/skl_hda_dsp_common.c +24 -0
index b2a9a6c6b147..b4ea53611092 100644
@@ -72,6 +72,30 @@ struct snd_soc_dai_link skl_hda_be_dai_links[HDA_DSP_MAX_BE_DAI_LINKS] = {
 		.dpcm_playback = 1,
 		.no_pcm = 1,
 	},
+	{
+		.name = "Analog Playback and Capture",
+		.id = 4,
+		.cpu_dai_name = "Analog CPU DAI",
+		.codec_name = "ehdaudio0D0",
+		.codec_dai_name = "Analog Codec DAI",
+		.platform_name = "0000:00:1f.3",
+		.dpcm_playback = 1,
+		.dpcm_capture = 1,
+		.init = NULL,
+		.no_pcm = 1,
+	},
+	{
+		.name = "Digital Playback and Capture",
+		.id = 5,
+		.cpu_dai_name = "Digital CPU DAI",
+		.codec_name = "ehdaudio0D0",
+		.codec_dai_name = "Digital Codec DAI",
+		.platform_name = "0000:00:1f.3",
+		.dpcm_playback = 1,
+		.dpcm_capture = 1,
+		.init = NULL,
+		.no_pcm = 1,
+	},
 };
 
 int skl_hda_hdmi_jack_init(struct snd_soc_card *card)
sound/soc/intel/boards/skl_hda_dsp_common.h +1 -1
index 04149b0dcec4..99bf47571c6f 100644
@@ -15,7 +15,7 @@
 #include <sound/core.h>
 #include <sound/jack.h>
 
-#define HDA_DSP_MAX_BE_DAI_LINKS 3
+#define HDA_DSP_MAX_BE_DAI_LINKS 5
 
 struct skl_hda_hdmi_pcm {
 	struct list_head head;
sound/soc/intel/boards/skl_hda_dsp_generic.c +38 -0
index f8817faf2f64..51cecda0117f 100644
@@ -18,6 +18,15 @@
 #include "../skylake/skl.h"
 #include "skl_hda_dsp_common.h"
 
+static const struct snd_soc_dapm_widget skl_hda_widgets[] = {
+	SND_SOC_DAPM_HP("Analog Out", NULL),
+	SND_SOC_DAPM_MIC("Analog In", NULL),
+	SND_SOC_DAPM_HP("Alt Analog Out", NULL),
+	SND_SOC_DAPM_MIC("Alt Analog In", NULL),
+	SND_SOC_DAPM_SPK("Digital Out", NULL),
+	SND_SOC_DAPM_MIC("Digital In", NULL),
+};
+
 static const struct snd_soc_dapm_route skl_hda_map[] = {
 
 	{ "hifi3", NULL, "iDisp3 Tx"},
@@ -26,6 +35,29 @@ static const struct snd_soc_dapm_route skl_hda_map[] = {
 	{ "iDisp2 Tx", NULL, "iDisp2_out"},
 	{ "hifi1", NULL, "iDisp1 Tx"},
 	{ "iDisp1 Tx", NULL, "iDisp1_out"},
+
+	{ "Analog Out", NULL, "Codec Output Pin1" },
+	{ "Digital Out", NULL, "Codec Output Pin2" },
+	{ "Alt Analog Out", NULL, "Codec Output Pin3" },
+
+	{ "Codec Input Pin1", NULL, "Analog In" },
+	{ "Codec Input Pin2", NULL, "Digital In" },
+	{ "Codec Input Pin3", NULL, "Alt Analog In" },
+
+	/* CODEC BE connections */
+	{ "Analog Codec Playback", NULL, "Analog CPU Playback" },
+	{ "Analog CPU Playback", NULL, "codec0_out" },
+	{ "Digital Codec Playback", NULL, "Digital CPU Playback" },
+	{ "Digital CPU Playback", NULL, "codec1_out" },
+	{ "Alt Analog Codec Playback", NULL, "Alt Analog CPU Playback" },
+	{ "Alt Analog CPU Playback", NULL, "codec2_out" },
+
+	{ "codec0_in", NULL, "Analog CPU Capture" },
+	{ "Analog CPU Capture", NULL, "Analog Codec Capture" },
+	{ "codec1_in", NULL, "Digital CPU Capture" },
+	{ "Digital CPU Capture", NULL, "Digital Codec Capture" },
+	{ "codec2_in", NULL, "Alt Analog CPU Capture" },
+	{ "Alt Analog CPU Capture", NULL, "Alt Analog Codec Capture" },
 };
 
 static int skl_hda_card_late_probe(struct snd_soc_card *card)
@@ -54,6 +86,7 @@ static struct snd_soc_card hda_soc_card = {
 	.name = "skl_hda_card",
 	.owner = THIS_MODULE,
 	.dai_link = skl_hda_be_dai_links,
+	.dapm_widgets = skl_hda_widgets,
 	.dapm_routes = skl_hda_map,
 	.add_dai_link = skl_hda_add_dai_link,
 	.fully_routed = true,
@@ -77,6 +110,11 @@ static int skl_hda_fill_card_info(struct skl_machine_pdata *pdata)
 	if (codec_count == 1 && pdata->codec_mask & IDISP_CODEC_MASK) {
 		num_links = IDISP_DAI_COUNT;
 		num_route = IDISP_ROUTE_COUNT;
+	} else if (codec_count == 2 && codec_mask & IDISP_CODEC_MASK) {
+		num_links = ARRAY_SIZE(skl_hda_be_dai_links);
+		num_route = ARRAY_SIZE(skl_hda_map),
+		card->dapm_widgets = skl_hda_widgets;
+		card->num_dapm_widgets = ARRAY_SIZE(skl_hda_widgets);
 	} else {
 		return -EINVAL;
 	}
sound/soc/intel/skylake/skl.c +43 -4

86 lines not on this page · raw message

Signature · 1 line
2.14.1
#10 lore raw

PATCH v5 8/8 ASoC: Intel: Skylake: add option to control HDAudio + DSP usage

In reply to Pierre-Louis Bossart

Add two options to explicitly enable HDAudio + DSP usage and force its use

---
 sound/soc/intel/Kconfig       | 19 +++++++++++++++++++
 sound/soc/intel/skylake/skl.c |  7 ++++++-
 2 files changed, 25 insertions(+), 1 deletion(-)
sound/soc/intel/Kconfig +19 -0
index 0caa1f4eb94d..93c3693cdf13 100644
@@ -117,6 +117,25 @@ config SND_SOC_INTEL_SKYLAKE
 	  GeminiLake or CannonLake platform with the DSP enabled in the BIOS
 	  then enable this option by saying Y or m.
 
+config SND_SOC_INTEL_SKYLAKE_HDA_DSP
+	bool "Enable HDAudio Codec + DSP support"
+	depends on SND_SOC_INTEL_SKYLAKE
+	help
+	  If you have a Intel Skylake+ platform with the DSP enabled in
+	  the BIOS and an HDAudio codec, then enable this option by saying Y
+	  This option will only have an effect if there are no ACPI-enumerated
+	  audio devices (I2C, SoundWire).
+
+config SND_SOC_INTEL_SKYLAKE_FORCE_HDA_DSP
+	bool "Force HDAudio Codec + DSP support"
+	depends on SND_SOC_INTEL_SKYLAKE_HDA_DSP
+	help
+	  If you have a Intel Skylake+ platform with the DSP enabled in
+	  the BIOS and an HDAudio codec, then enable this option by saying Y
+	  This option will ignore information from the BIOS and force the use
+	  of the HDaudio codec, if present.
+	  This is a debug option not recommended for distros.
+
 config SND_SOC_ACPI_INTEL_MATCH
 	tristate
 	select SND_SOC_ACPI if ACPI
sound/soc/intel/skylake/skl.c +6 -1
index e8bf46cfea45..b14a47e765de 100644
@@ -474,6 +474,7 @@ static struct skl_ssp_clk skl_ssp_clks[] = {
 						{.name = "ssp5_sclkfs"},
 };
 
+#if IS_ENABLED(CONFIG_SND_SOC_INTEL_SKYLAKE_HDA_DSP)
 static struct snd_soc_acpi_mach *skl_find_hda_machine(struct skl *skl,
 					struct snd_soc_acpi_mach *machines)
 {
@@ -492,6 +493,7 @@ static struct snd_soc_acpi_mach *skl_find_hda_machine(struct skl *skl,
 
 	return mach;
 }
+#endif
 
 static int skl_find_machine(struct skl *skl, void *driver_data)
 {
@@ -500,13 +502,16 @@ static int skl_find_machine(struct skl *skl, void *driver_data)
 	struct skl_machine_pdata *pdata;
 
 	mach = snd_soc_acpi_find_machine(mach);
-	if (!mach) {
+	if (!mach || IS_ENABLED(CONFIG_SND_SOC_INTEL_SKYLAKE_FORCE_HDA_DSP)) {
 		dev_dbg(bus->dev, "No matching I2S machine driver found\n");
+#if IS_ENABLED(CONFIG_SND_SOC_INTEL_SKYLAKE_HDA_DSP)
 		mach = skl_find_hda_machine(skl, driver_data);
+#endif
 		if (!mach) {
 			dev_err(bus->dev, "No matching machine driver found\n");
 			return -ENODEV;
 		}
+
 	}
 
 	skl->mach = mach;
Signature · 1 line
2.14.1
#11 lore raw

Re: [PATCH v5 8/8] ASoC: Intel: Skylake: add option to control HDAudio + DSP usage

Quoted 16 lines · Pierre-Louis Bossart

Add two options to explicitly enable HDAudio + DSP usage and force its use

---
 sound/soc/intel/Kconfig       | 19 +++++++++++++++++++
 sound/soc/intel/skylake/skl.c |  7 ++++++-
 2 files changed, 25 insertions(+), 1 deletion(-)
sound/soc/intel/Kconfig +0 -0
index 0caa1f4eb94d..93c3693cdf13 100644
@@ -117,6 +117,25 @@ config SND_SOC_INTEL_SKYLAKE
 	  GeminiLake or CannonLake platform with the DSP enabled in the BIOS

sound/soc/intel/Kconfig config SND_SOC_INTEL_SKYLAKE · line 127

Quoted 10 lines
sound/soc/intel/Kconfig +8 -0
 	  then enable this option by saying Y or m.
 
+config SND_SOC_INTEL_SKYLAKE_HDA_DSP
+	bool "Enable HDAudio Codec + DSP support"
+	depends on SND_SOC_INTEL_SKYLAKE
+	help
+	  If you have a Intel Skylake+ platform with the DSP enabled in
+	  the BIOS and an HDAudio codec, then enable this option by saying Y
+	  This option will only have an effect if there are no ACPI-enumerated
+	  audio devices (I2C, SoundWire).

IMO, the change needed for this config should be folded into the patch 4 "ASoC: Intel: Skylake: use HDAudio if ACPI enumeration fails").

sound/soc/intel/Kconfig config SND_SOC_INTEL_SKYLAKE · line 137

Quoted 9 lines
sound/soc/intel/Kconfig +9 -0
+config SND_SOC_INTEL_SKYLAKE_FORCE_HDA_DSP
+	bool "Force HDAudio Codec + DSP support"
+	depends on SND_SOC_INTEL_SKYLAKE_HDA_DSP
+	help
+	  If you have a Intel Skylake+ platform with the DSP enabled in
+	  the BIOS and an HDAudio codec, then enable this option by saying Y
+	  This option will ignore information from the BIOS and force the use
+	  of the HDaudio codec, if present.
+	  This is a debug option not recommended for distros.

... and this one is better to be a module option. Distros tend to enable all possible options, and this may be set unnecessarily. If any, this kconfig should be only toggling the default option value.

Just another nitpicking:

sound/soc/intel/Kconfig static struct snd_soc_acpi_mach *skl_find_hda_machine(struct skl *skl, · line 496

Quoted 13 lines
sound/soc/intel/Kconfig +2 -0
@@ -474,6 +474,7 @@ static struct skl_ssp_clk skl_ssp_clks[] = {
 						{.name = "ssp5_sclkfs"},
 };
 
+#if IS_ENABLED(CONFIG_SND_SOC_INTEL_SKYLAKE_HDA_DSP)
 static struct snd_soc_acpi_mach *skl_find_hda_machine(struct skl *skl,
 					struct snd_soc_acpi_mach *machines)
 {
@@ -492,6 +493,7 @@ static struct snd_soc_acpi_mach *skl_find_hda_machine(struct skl *skl,
 
 	return mach;
 }
+#endif

Defining a dumb skl_find_hda_machine() returning NULL as #else would reduce one more ifdef. Also, CONFIG_SND_SOC_INTEL_SKYLAKE_HDA_DSP is a bool, so it can be a simple ifdef without IS_ENABLED().

#ifdef CONFIG_SND_SOC_INTEL_SKYLAKE_HDA_DSP
static struct snd_soc_acpi_mach *skl_find_hda_machine(struct skl *skl,
struct snd_soc_acpi_mach *machines)

{
	....
}
#else
static struct snd_soc_acpi_mach *skl_find_hda_machine(struct skl *skl,
 					struct snd_soc_acpi_mach *machines)
{
	return NULL;
}

#endif

thanks,

Takashi

#12 lore raw

Re: [PATCH v5 8/8] ASoC: Intel: Skylake: add option to control HDAudio + DSP usage

Quoted 20 lines · Takashi Iwai
Quoted 18 lines · Pierre-Louis Bossart

Add two options to explicitly enable HDAudio + DSP usage and force its use

---
  sound/soc/intel/Kconfig       | 19 +++++++++++++++++++
  sound/soc/intel/skylake/skl.c |  7 ++++++-
  2 files changed, 25 insertions(+), 1 deletion(-)
sound/soc/intel/Kconfig +0 -0
index 0caa1f4eb94d..93c3693cdf13 100644
@@ -117,6 +117,25 @@ config SND_SOC_INTEL_SKYLAKE
  	  GeminiLake or CannonLake platform with the DSP enabled in the BIOS
  	  then enable this option by saying Y or m.
 
Quoted 11 lines

sound/soc/intel/Kconfig config SND_SOC_INTEL_SKYLAKE · line 127

Quoted 8 lines
sound/soc/intel/Kconfig +8 -0
+config SND_SOC_INTEL_SKYLAKE_HDA_DSP
+	bool "Enable HDAudio Codec + DSP support"
+	depends on SND_SOC_INTEL_SKYLAKE
+	help
+	  If you have a Intel Skylake+ platform with the DSP enabled in
+	  the BIOS and an HDAudio codec, then enable this option by saying Y
+	  This option will only have an effect if there are no ACPI-enumerated
+	  audio devices (I2C, SoundWire).

IMO, the change needed for this config should be folded into the patch 4 "ASoC: Intel: Skylake: use HDAudio if ACPI enumeration fails").

Yes, agreed.

Quoted 16 lines

sound/soc/intel/Kconfig config SND_SOC_INTEL_SKYLAKE · line 137

Quoted 11 lines
sound/soc/intel/Kconfig +9 -0
+config SND_SOC_INTEL_SKYLAKE_FORCE_HDA_DSP
+	bool "Force HDAudio Codec + DSP support"
+	depends on SND_SOC_INTEL_SKYLAKE_HDA_DSP
+	help
+	  If you have a Intel Skylake+ platform with the DSP enabled in
+	  the BIOS and an HDAudio codec, then enable this option by saying Y
+	  This option will ignore information from the BIOS and force the use
+	  of the HDaudio codec, if present.
+	  This is a debug option not recommended for distros.

... and this one is better to be a module option. Distros tend to enable all possible options, and this may be set unnecessarily. If any, this kconfig should be only toggling the default option value.

Sorry, I don't get this one. this wouldn't change anything between built-in or module, it's just a yes/no answer to ignore ACPI stuff. the default is also no and there is a clear statement not to include it except for debug. We have a similar option for SOF to bypass all ACPI information and go straight to 'nocodec' mode.

Quoted 33 lines

Just another nitpicking:

sound/soc/intel/Kconfig static struct snd_soc_acpi_mach *skl_find_hda_machine(struct skl *skl, · line 496

Quoted 13 lines
sound/soc/intel/Kconfig +2 -0
@@ -474,6 +474,7 @@ static struct skl_ssp_clk skl_ssp_clks[] = {
  						{.name = "ssp5_sclkfs"},
  };
 
+#if IS_ENABLED(CONFIG_SND_SOC_INTEL_SKYLAKE_HDA_DSP)
  static struct snd_soc_acpi_mach *skl_find_hda_machine(struct skl *skl,
  					struct snd_soc_acpi_mach *machines)
  {
@@ -492,6 +493,7 @@ static struct snd_soc_acpi_mach *skl_find_hda_machine(struct skl *skl,
 
  	return mach;
  }
+#endif

Defining a dumb skl_find_hda_machine() returning NULL as #else would reduce one more ifdef. Also, CONFIG_SND_SOC_INTEL_SKYLAKE_HDA_DSP is a bool, so it can be a simple ifdef without IS_ENABLED().

#ifdef CONFIG_SND_SOC_INTEL_SKYLAKE_HDA_DSP
static struct snd_soc_acpi_mach *skl_find_hda_machine(struct skl *skl,
struct snd_soc_acpi_mach *machines)

{
	....
}
#else
static struct snd_soc_acpi_mach *skl_find_hda_machine(struct skl *skl,
  					struct snd_soc_acpi_mach *machines)
{
	return NULL;
}
Quoted 1 line

#endif

yes, thanks for the suggestion.

Quoted 6 lines

thanks,

Takashi

maintainer
#13 lore raw

Re: [PATCH v5 8/8] ASoC: Intel: Skylake: add option to control HDAudio + DSP usage

Quoted 18 lines · Pierre-Louis Bossart
Quoted 16 lines · Takashi Iwai

sound/soc/intel/Kconfig config SND_SOC_INTEL_SKYLAKE · line 137

Quoted 9 lines · Pierre-Louis Bossart
sound/soc/intel/Kconfig +9 -0
+config SND_SOC_INTEL_SKYLAKE_FORCE_HDA_DSP
+	bool "Force HDAudio Codec + DSP support"
+	depends on SND_SOC_INTEL_SKYLAKE_HDA_DSP
+	help
+	  If you have a Intel Skylake+ platform with the DSP enabled in
+	  the BIOS and an HDAudio codec, then enable this option by saying Y
+	  This option will ignore information from the BIOS and force the use
+	  of the HDaudio codec, if present.
+	  This is a debug option not recommended for distros.

... and this one is better to be a module option. Distros tend to enable all possible options, and this may be set unnecessarily. If any, this kconfig should be only toggling the default option value.

Quoted 5 lines

Sorry, I don't get this one. this wouldn't change anything between built-in or module, it's just a yes/no answer to ignore ACPI stuff. the default is also no and there is a clear statement not to include it except for debug. We have a similar option for SOF to bypass all ACPI information and go straight to 'nocodec' mode.

Debug options like these are really a lot more useful as something runtime selectable with something like a module parameter as Takashi suggests - an innatentive distro maintainer could easily enable it by mistake when going through a bunch of new options in a new kernel release and if someone needs it for debugging purposes in a distro context it's a real pain to have to rebuild the kernel.

It's also a bit confusing as the config text says:

Quoted 2 lines
Quoted 2 lines

Review

Quoted 2 lines
(quoted diff) +2 -0
+	  If you have a Intel Skylake+ platform with the DSP enabled in
+	  the BIOS and an HDAudio codec, then enable this option by saying Y

which sounds like people should turn it on, the bit about it being a debug option is quite deep in the text.

#14 lore raw

Re: [PATCH v5 8/8] ASoC: Intel: Skylake: add option to control HDAudio + DSP usage

Quoted 25 lines · Mark Brown
Quoted 18 lines · Pierre-Louis Bossart
Quoted 16 lines · Takashi Iwai

sound/soc/intel/Kconfig config SND_SOC_INTEL_SKYLAKE · line 137

Quoted 9 lines · Pierre-Louis Bossart
sound/soc/intel/Kconfig +9 -0
+config SND_SOC_INTEL_SKYLAKE_FORCE_HDA_DSP
+	bool "Force HDAudio Codec + DSP support"
+	depends on SND_SOC_INTEL_SKYLAKE_HDA_DSP
+	help
+	  If you have a Intel Skylake+ platform with the DSP enabled in
+	  the BIOS and an HDAudio codec, then enable this option by saying Y
+	  This option will ignore information from the BIOS and force the use
+	  of the HDaudio codec, if present.
+	  This is a debug option not recommended for distros.

... and this one is better to be a module option. Distros tend to enable all possible options, and this may be set unnecessarily. If any, this kconfig should be only toggling the default option value.

Quoted 5 lines

Sorry, I don't get this one. this wouldn't change anything between built-in or module, it's just a yes/no answer to ignore ACPI stuff. the default is also no and there is a clear statement not to include it except for debug. We have a similar option for SOF to bypass all ACPI information and go straight to 'nocodec' mode.

Quoted 6 lines

Debug options like these are really a lot more useful as something runtime selectable with something like a module parameter as Takashi suggests - an innatentive distro maintainer could easily enable it by mistake when going through a bunch of new options in a new kernel release and if someone needs it for debugging purposes in a distro context it's a real pain to have to rebuild the kernel.

Ah yes, I get it now and yes it's probably a better idea to have a kernel parameter. I saw multiple cases of distros such as Arch enabling the baytrail nocodec mode and it's not straightforward to reach all maintainers of all distros. Will fix, thanks for the feedback.

Quoted 9 lines

It's also a bit confusing as the config text says:

Quoted 2 lines
Quoted 2 lines

Review

Quoted 2 lines
(quoted diff) +2 -0
+	  If you have a Intel Skylake+ platform with the DSP enabled in
+	  the BIOS and an HDAudio codec, then enable this option by saying Y

which sounds like people should turn it on, the bit about it being a debug option is quite deep in the text.