staging: rtl8188eu: remove unused dump_txrpt_ccx_88e()
PATCH v2 1/7 staging: rtl8188eu: remove unused dump_txrpt_ccx_88e()
The function dump_txrpt_ccx_88e() is nerver used, so remove it. Discovered by cppcheck.
---
v2: removed last patch (8/8) from the series
drivers/staging/rtl8188eu/hal/rtl8188e_xmit.c | 22 ------------------- .../staging/rtl8188eu/include/rtl8188e_xmit.h | 1 - 2 files changed, 23 deletions(-)
drivers/staging/rtl8188eu/hal/rtl8188e_xmit.c +0 -22
@@ -10,28 +10,6 @@#include <drv_types.h> #include <rtl8188e_hal.h> -void dump_txrpt_ccx_88e (void *buf) -{ -struct txrpt_ccx_88e *txrpt_ccx = buf; - -DBG_88E ("%s:\n" -"tag1:%u, pkt_num:%u, txdma_underflow:%u, int_bt:%u, int_tri:%u, int_ccx:%u\n" -"mac_id:%u, pkt_ok:%u, bmc:%u\n" -"retry_cnt:%u, lifetime_over:%u, retry_over:%u\n" -"ccx_qtime:%u\n" -"final_data_rate:0x%02x\n" -"qsel:%u, sw:0x%03x\n" , - __func__, txrpt_ccx->tag1, txrpt_ccx->pkt_num, - txrpt_ccx->txdma_underflow, txrpt_ccx->int_bt, - txrpt_ccx->int_tri, txrpt_ccx->int_ccx, - txrpt_ccx->mac_id, txrpt_ccx->pkt_ok, txrpt_ccx->bmc, - txrpt_ccx->retry_cnt, txrpt_ccx->lifetime_over, - txrpt_ccx->retry_over,txrpt_ccx_qtime_88e (txrpt_ccx), - txrpt_ccx->final_data_rate, txrpt_ccx->qsel, -txrpt_ccx_sw_88e (txrpt_ccx) - ); -} -void handle_txrpt_ccx_88e (struct adapter *adapter,u8 *buf) {struct txrpt_ccx_88e *txrpt_ccx = (struct txrpt_ccx_88e *)buf;
drivers/staging/rtl8188eu/include/rtl8188e_xmit.h +0 -1
@@ -152,7 +152,6 @@ void rtl8188eu_xmit_tasklet(void *priv);s32 rtl8188eu_xmitframe_complete (struct adapter *padapter,struct xmit_priv *pxmitpriv); -void dump_txrpt_ccx_88e (void *buf);void handle_txrpt_ccx_88e (struct adapter *adapter,u8 *buf); void _dbg_dump_tx_info(struct adapter *padapter, int frame_tag,
Signature · 1 line
2.18.0
PATCH v2 2/7 staging: rtl8188eu: remove unused should_forbid_n_rate()
The function should_forbid_n_rate() is never used, so remove it. Discovered by cppcheck.
--- .../staging/rtl8188eu/core/rtw_wlan_util.c | 35 ------------------- .../staging/rtl8188eu/include/rtw_mlme_ext.h | 1 - 2 files changed, 36 deletions(-)
drivers/staging/rtl8188eu/core/rtw_wlan_util.c +0 -35
@@ -1094,41 +1094,6 @@ unsigned int is_ap_in_tkip(struct adapter *padapter) } } -unsigned int should_forbid_n_rate (struct adapter *padapter) -{ -u32 i; -struct ndis_802_11_var_ie *pIE; -struct mlme_priv *pmlmepriv = &padapter->mlmepriv; -struct wlan_bssid_ex *cur_network = &pmlmepriv->cur_network.network; - -if (rtw_get_capability ((struct wlan_bssid_ex *)cur_network) &WLAN_CAPABILITY_PRIVACY ) { -for (i =sizeof (struct ndis_802_11_fixed_ie ); i < cur_network->ie_length;) { - pIE = (struct ndis_802_11_var_ie *)(cur_network->ies + i); - -switch (pIE->ElementID) { -case _VENDOR_SPECIFIC_IE_: -if (!memcmp (pIE->data,RTW_WPA_OUI ,4 ) && - ((!memcmp ((pIE->data +12 ),WPA_CIPHER_SUITE_CCMP ,4 )) || - (!memcmp ((pIE->data +16 ),WPA_CIPHER_SUITE_CCMP ,4 )))) -return false; -break ; -case _RSN_IE_2_: -if ((!memcmp ((pIE->data +8 ),RSN_CIPHER_SUITE_CCMP ,4 )) || - (!memcmp ((pIE->data +12 ),RSN_CIPHER_SUITE_CCMP ,4 ))) -return false; -default : -break ; - } - - i += (pIE->Length +2 ); - } - -return true; - }else { -return false; - } -} -unsigned int is_ap_in_wep (struct adapter *padapter) {u32 i;
drivers/staging/rtl8188eu/include/rtw_mlme_ext.h +0 -1
@@ -534,7 +534,6 @@ unsigned char get_highest_rate_idx(u32 mask);int support_short_GI (struct adapter *padapter,struct ieee80211_ht_cap *caps);unsigned int is_ap_in_tkip (struct adapter *padapter);unsigned int is_ap_in_wep (struct adapter *padapter); -unsigned int should_forbid_n_rate (struct adapter *padapter);void report_join_res (struct adapter *padapter,int res); void report_survey_event(struct adapter *padapter,
Signature · 1 line
2.18.0
PATCH v2 3/7 staging: rtl8188eu: remove unused rtw_handle_tkip_mic_err()
In reply to Michael StraubeThe function rtw_handle_tkip_mic_err() is never used, so remove it. Discovered by cppcheck.
--- .../staging/rtl8188eu/include/recv_osdep.h | 2 -- drivers/staging/rtl8188eu/os_dep/recv_linux.c | 36 ------------------- 2 files changed, 38 deletions(-)
drivers/staging/rtl8188eu/include/recv_osdep.h +0 -2
@@ -19,8 +19,6 @@ s32 rtw_recv_entry(struct recv_frame *precv_frame);int rtw_recv_indicatepkt (struct adapter *adapter,struct recv_frame *recv_frame); -void rtw_handle_tkip_mic_err (struct adapter *padapter,u8 bgroup); -int rtw_os_recvbuf_resource_alloc (struct adapter *adapt,struct recv_buf *buf);void rtw_init_recv_timer (struct recv_reorder_ctrl *preorder_ctrl);
drivers/staging/rtl8188eu/os_dep/recv_linux.c +0 -36
@@ -25,42 +25,6 @@ int rtw_os_recvbuf_resource_alloc(struct adapter *padapter,return _SUCCESS; } -void rtw_handle_tkip_mic_err (struct adapter *padapter,u8 bgroup) -{ -union iwreq_data wrqu; -struct iw_michaelmicfailure ev; -struct mlme_priv *pmlmepriv = &padapter->mlmepriv; -struct security_priv *psecuritypriv = &padapter->securitypriv; -u32 cur_time =0 ; - -if (psecuritypriv->last_mic_err_time ==0 ) { - psecuritypriv->last_mic_err_time = jiffies; - }else { - cur_time = jiffies; - -if (cur_time - psecuritypriv->last_mic_err_time <60 *HZ ) { - psecuritypriv->btkip_countermeasure = true; - psecuritypriv->last_mic_err_time =0 ; - psecuritypriv->btkip_countermeasure_time = cur_time; - }else { - psecuritypriv->last_mic_err_time = jiffies; - } - } - -memset (&ev,0x00 ,sizeof (ev)); -if (bgroup) - ev.flags |=IW_MICFAILURE_GROUP ; -else - ev.flags |=IW_MICFAILURE_PAIRWISE ; - - ev.src_addr.sa_family =ARPHRD_ETHER ; -memcpy (ev.src_addr.sa_data, &pmlmepriv->assoc_bssid[0 ],ETH_ALEN ); -memset (&wrqu,0x00 ,sizeof (wrqu)); - wrqu.data.length =sizeof (ev); -wireless_send_event (padapter->pnetdev,IWEVMICHAELMICFAILURE , - &wrqu, (char *)&ev); -} -int rtw_recv_indicatepkt (struct adapter *padapter,struct recv_frame *precv_frame) {
Signature · 1 line
2.18.0
Greg KH
maintainerRe: [PATCH v2 3/7] staging: rtl8188eu: remove unused rtw_handle_tkip_mic_err()
Quoted 2 lines · Michael Straube
The function
rtw_handle_tkip_mic_err()is never used, so remove it. Discovered by cppcheck.
That's a bad tool then, as this is used, and the build breaks when this patch is applied :(
I've dropped it now.
thanks,
greg k-h
Re: [PATCH v2 3/7] staging: rtl8188eu: remove unused rtw_handle_tkip_mic_err()
Quoted 4 lines · Greg KH
Quoted 2 lines · Michael Straube
The function
rtw_handle_tkip_mic_err()is never used, so remove it. Discovered by cppcheck.
Quoted 9 lines
That's a bad tool then, as this is used, and the build breaks when this patch is applied :(
I've dropped it now.
thanks,
greg k-h
Hm, that's weired, I also checked with:
git grep -n rtw_handle_tkip_mic_err drivers/staging/rtl8188eu/
There were/are no uses and the driver builds and works fine here. I don't see what I may have missed here. :(
Regards,
Michael
Re: [PATCH v2 3/7] staging: rtl8188eu: remove unused rtw_handle_tkip_mic_err()
Quoted 17 lines · Michael Straube
Quoted 4 lines · Greg KH
Quoted 2 lines · Michael Straube
The function
rtw_handle_tkip_mic_err()is never used, so remove it. Discovered by cppcheck.Quoted 9 lines
That's a bad tool then, as this is used, and the build breaks when this patch is applied :(
I've dropped it now.
thanks,
greg k-h
Hm, that's weired, I also checked with:
Quoted 7 lines
git grep -n
rtw_handle_tkip_mic_errdrivers/staging/rtl8188eu/There were/are no uses and the driver builds and works fine here. I don't see what I may have missed here. :(
Regards,
Michael
The use of rtw_handle_tkip_mic_err() was added back in commit
69a1d98c831ec64cbfd381f5dcb6697e1445d239 Revert "staging:r8188eu: Use lib80211 to support TKIP"
which was applied with 'Merge 4.18-rc7 into staging-next'.
That was not applied when I sent the patch yesterday, sorry for the trouble.
Michael
Greg KH
maintainerRe: [PATCH v2 3/7] staging: rtl8188eu: remove unused rtw_handle_tkip_mic_err()
Quoted 28 lines · Michael Straube
Quoted 17 lines · Michael Straube
Quoted 4 lines · Greg KH
Quoted 2 lines · Michael Straube
The function
rtw_handle_tkip_mic_err()is never used, so remove it. Discovered by cppcheck.Quoted 9 lines
That's a bad tool then, as this is used, and the build breaks when this patch is applied :(
I've dropped it now.
thanks,
greg k-h
Hm, that's weired, I also checked with:
Quoted 7 lines
git grep -n
rtw_handle_tkip_mic_errdrivers/staging/rtl8188eu/There were/are no uses and the driver builds and works fine here. I don't see what I may have missed here. :(
Regards,
MichaelThe use of
rtw_handle_tkip_mic_err()was added back in commit
Quoted 7 lines
69a1d98c831ec64cbfd381f5dcb6697e1445d239Revert "staging:r8188eu: Use lib80211 to support TKIP"which was applied with 'Merge 4.18-rc7 into staging-next'.
That was not applied when I sent the patch yesterday, sorry for the trouble.
Ah, that makes more sense, sorry for the noise, I should have caught that.
greg k-h
PATCH v2 4/7 staging: rtl8188eu: remove redundant includes
In reply to Michael StraubeBoth osdep_service.h and drv_types.h are included from hal_intf.h, so remove the redundant includes from hal_intf.c.
--- drivers/staging/rtl8188eu/hal/hal_intf.c | 2 -- 1 file changed, 2 deletions(-)
drivers/staging/rtl8188eu/hal/hal_intf.c +0 -2
@@ -6,8 +6,6 @@******************************************************************************/ #define _HAL_INTF_C_ -#include <osdep_service.h> -#include <drv_types.h> #include <hal_intf.h> uint rtw_hal_init (struct adapter *adapt)
Signature · 1 line
2.18.0
PATCH v2 5/7 staging: rtl8188eu: replace tabs with spaces
In reply to Michael StraubeReplace tabs with spaces in function definition and variable declarations.
--- drivers/staging/rtl8188eu/hal/hal_intf.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)
drivers/staging/rtl8188eu/hal/hal_intf.c +3 -3
@@ -8,9 +8,9 @@#define _HAL_INTF_C_#include <hal_intf.h> -uint rtw_hal_init (struct adapter *adapt) +uint rtw_hal_init (struct adapter *adapt) { -uint status = _SUCCESS; +uint status = _SUCCESS; adapt->hw_init_completed = false;
@@ -34,7 +34,7 @@ uint rtw_hal_init(struct adapter *adapt)uint rtw_hal_deinit (struct adapter *adapt) { -uint status = _SUCCESS; +uint status = _SUCCESS; status =rtl8188eu_hal_deinit (adapt);
Signature · 1 line
2.18.0
PATCH v2 6/7 staging: rtl8188eu: fix comparsion to true
In reply to Michael StraubeUse if(x) instead of if(x == true).
--- drivers/staging/rtl8188eu/hal/hal_intf.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/staging/rtl8188eu/hal/hal_intf.c +1 -1
@@ -50,7 +50,7 @@ void rtw_hal_update_ra_mask(struct adapter *adapt, u32 mac_id, u8 rssi_level) {struct mlme_priv *pmlmepriv = &(adapt->mlmepriv); -if (check_fwstate (pmlmepriv,WIFI_AP_STATE ) == true) { +if (check_fwstate (pmlmepriv,WIFI_AP_STATE )) {#ifdef CONFIG_88EU_AP_MODE struct sta_info *psta =NULL ;struct sta_priv *pstapriv = &adapt->stapriv;
Signature · 1 line
2.18.0
PATCH v2 7/7 staging: rtl8188eu: remove unnecessary parentheses
In reply to Michael StraubeRemove unnecessary parentheses, also clears checkpatch issues about missing spaces around '-'.
--- drivers/staging/rtl8188eu/hal/hal_intf.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)
drivers/staging/rtl8188eu/hal/hal_intf.c +3 -3
@@ -48,15 +48,15 @@ uint rtw_hal_deinit(struct adapter *adapt)void rtw_hal_update_ra_mask (struct adapter *adapt,u32 mac_id,u8 rssi_level) { -struct mlme_priv *pmlmepriv = &(adapt->mlmepriv); +struct mlme_priv *pmlmepriv = &adapt->mlmepriv;if (check_fwstate (pmlmepriv,WIFI_AP_STATE )) {#ifdef CONFIG_88EU_AP_MODE struct sta_info *psta =NULL ;struct sta_priv *pstapriv = &adapt->stapriv; -if ((mac_id-1 ) >0 ) - psta = pstapriv->sta_aid[(mac_id-1 ) -1 ]; +if (mac_id -1 >0 ) + psta = pstapriv->sta_aid[mac_id -2 ];if (psta)add_RATid (adapt, psta,0 );/* todo: based on rssi_level*/ #endif
Signature · 1 line
2.18.0