staging: rtl8188eu: use is_broadcast_ether_addr

PATCH New Michael Straube 1 participant 7 messages Jul 31, 2018 Staging

Share & tools

Michael Straube

author

2018-07-31 11:34 UTC #0 lore raw

PATCH 1/7 staging: rtl8188eu: use is_broadcast_ether_addr

Use is_broadcast_ether_addr instead of checking each byte of the address array for 0xff. Shortens the code and improves readability.

As required by is_broadcast_ether_addr, the address array sta_addr is properly aligned in all uses. Thanks to Joe Perches.

Signed-off-by Michael Straube <[email protected]>

---
 .../staging/rtl8188eu/os_dep/ioctl_linux.c    | 34 ++++++-------------
 1 file changed, 10 insertions(+), 24 deletions(-)

drivers/staging/rtl8188eu/os_dep/ioctl_linux.c +10 ~~-24~~

index 221fae22bab6..4a8124570e6e 100644
@@ -361,9 +361,7 @@ static int wpa_set_encryption(struct net_device *dev, struct ieee_param *param,
 		goto exit;
 	}
 
-	if (param->sta_addr[0] == 0xff && param->sta_addr[1] == 0xff &&
-	    param->sta_addr[2] == 0xff && param->sta_addr[3] == 0xff &&
-	    param->sta_addr[4] == 0xff && param->sta_addr[5] == 0xff) {
+	if (is_broadcast_ether_addr(param->sta_addr)) {
 		if (param->u.crypt.idx >= WEP_KEYS) {
 			ret = -EINVAL;
 			goto exit;

@@ -2208,9 +2206,7 @@ static int rtw_set_encryption(struct net_device *dev, struct ieee_param *param,
 		ret =  -EINVAL;
 		goto exit;
 	}
-	if (param->sta_addr[0] == 0xff && param->sta_addr[1] == 0xff &&
-	    param->sta_addr[2] == 0xff && param->sta_addr[3] == 0xff &&
-	    param->sta_addr[4] == 0xff && param->sta_addr[5] == 0xff) {
+	if (is_broadcast_ether_addr(param->sta_addr)) {
 		if (param->u.crypt.idx >= WEP_KEYS) {
 			ret = -EINVAL;
 			goto exit;

@@ -2471,9 +2467,7 @@ static int rtw_add_sta(struct net_device *dev, struct ieee_param *param)
 	if (!check_fwstate(pmlmepriv, (_FW_LINKED|WIFI_AP_STATE)))
 		return -EINVAL;
 
-	if (param->sta_addr[0] == 0xff && param->sta_addr[1] == 0xff &&
-	    param->sta_addr[2] == 0xff && param->sta_addr[3] == 0xff &&
-	    param->sta_addr[4] == 0xff && param->sta_addr[5] == 0xff)
+	if (is_broadcast_ether_addr(param->sta_addr))
 		return -EINVAL;
 
 	psta = rtw_get_stainfo(pstapriv, param->sta_addr);

@@ -2528,9 +2522,7 @@ static int rtw_del_sta(struct net_device *dev, struct ieee_param *param)
 	if (check_fwstate(pmlmepriv, (_FW_LINKED|WIFI_AP_STATE)) != true)
 		return -EINVAL;
 
-	if (param->sta_addr[0] == 0xff && param->sta_addr[1] == 0xff &&
-	    param->sta_addr[2] == 0xff && param->sta_addr[3] == 0xff &&
-	    param->sta_addr[4] == 0xff && param->sta_addr[5] == 0xff)
+	if (is_broadcast_ether_addr(param->sta_addr))
 		return -EINVAL;
 
 	psta = rtw_get_stainfo(pstapriv, param->sta_addr);

@@ -2566,9 +2558,7 @@ static int rtw_ioctl_get_sta_data(struct net_device *dev, struct ieee_param *par
 	if (check_fwstate(pmlmepriv, (_FW_LINKED|WIFI_AP_STATE)) != true)
 		return -EINVAL;
 
-	if (param_ex->sta_addr[0] == 0xff && param_ex->sta_addr[1] == 0xff &&
-	    param_ex->sta_addr[2] == 0xff && param_ex->sta_addr[3] == 0xff &&
-	    param_ex->sta_addr[4] == 0xff && param_ex->sta_addr[5] == 0xff)
+	if (is_broadcast_ether_addr(param_ex->sta_addr))
 		return -EINVAL;
 
 	psta = rtw_get_stainfo(pstapriv, param_ex->sta_addr);

@@ -2622,9 +2612,7 @@ static int rtw_get_sta_wpaie(struct net_device *dev, struct ieee_param *param)
 	if (check_fwstate(pmlmepriv, (_FW_LINKED|WIFI_AP_STATE)) != true)
 		return -EINVAL;
 
-	if (param->sta_addr[0] == 0xff && param->sta_addr[1] == 0xff &&
-	    param->sta_addr[2] == 0xff && param->sta_addr[3] == 0xff &&
-	    param->sta_addr[4] == 0xff && param->sta_addr[5] == 0xff)
+	if (is_broadcast_ether_addr(param->sta_addr))
 		return -EINVAL;
 
 	psta = rtw_get_stainfo(pstapriv, param->sta_addr);

@@ -2779,10 +2767,9 @@ static int rtw_ioctl_acl_remove_sta(struct net_device *dev, struct ieee_param *p
 	if (check_fwstate(pmlmepriv, WIFI_AP_STATE) != true)
 		return -EINVAL;
 
-	if (param->sta_addr[0] == 0xff && param->sta_addr[1] == 0xff &&
-	    param->sta_addr[2] == 0xff && param->sta_addr[3] == 0xff &&
-	    param->sta_addr[4] == 0xff && param->sta_addr[5] == 0xff)
+	if (is_broadcast_ether_addr(param->sta_addr))
 		return -EINVAL;
+
 	return rtw_acl_remove_sta(padapter, param->sta_addr);
 }

@@ -2794,10 +2781,9 @@ static int rtw_ioctl_acl_add_sta(struct net_device *dev, struct ieee_param *para
 	if (check_fwstate(pmlmepriv, WIFI_AP_STATE) != true)
 		return -EINVAL;
 
-	if (param->sta_addr[0] == 0xff && param->sta_addr[1] == 0xff &&
-	    param->sta_addr[2] == 0xff && param->sta_addr[3] == 0xff &&
-	    param->sta_addr[4] == 0xff && param->sta_addr[5] == 0xff)
+	if (is_broadcast_ether_addr(param->sta_addr))
 		return -EINVAL;
+
 	return rtw_acl_add_sta(padapter, param->sta_addr);
 }

Signature · 1 line

2.18.0

Michael Straube

author

2018-07-31 11:34 UTC #1 lore raw

PATCH 2/7 staging: rtl8188eu: fix indentation - style

Fix indentation to clear checkpatch warnings.
WARNING: suspect code indent for conditional statements

Signed-off-by Michael Straube <[email protected]>

---
 drivers/staging/rtl8188eu/os_dep/ioctl_linux.c | 4 ++--
 drivers/staging/rtl8188eu/os_dep/usb_intf.c    | 2 +-
 2 files changed, 3 insertions(+), 3 deletions(-)

drivers/staging/rtl8188eu/os_dep/ioctl_linux.c +2 -2

index 4a8124570e6e..19387d87185d 100644
@@ -142,7 +142,7 @@ static char *translate_scan(struct adapter *padapter,
 		if (ht_cap)
 			snprintf(iwe.u.name, IFNAMSIZ, "IEEE 802.11bn");
 		else
-		snprintf(iwe.u.name, IFNAMSIZ, "IEEE 802.11b");
+			snprintf(iwe.u.name, IFNAMSIZ, "IEEE 802.11b");
 	} else if ((rtw_is_cckrates_included((u8 *)&pnetwork->network.SupportedRates))) {
 		if (ht_cap)
 			snprintf(iwe.u.name, IFNAMSIZ, "IEEE 802.11bgn");

@@ -2299,7 +2299,7 @@ static int rtw_set_encryption(struct net_device *dev, struct ieee_param *param,
 
 				psecuritypriv->dot118021XGrpPrivacy = _WEP40_;
 				if (param->u.crypt.key_len == 13)
-						psecuritypriv->dot118021XGrpPrivacy = _WEP104_;
+					psecuritypriv->dot118021XGrpPrivacy = _WEP104_;
 			} else if (strcmp(param->u.crypt.alg, "TKIP") == 0) {
 				DBG_88E("%s, set group_key, TKIP\n", __func__);
 				psecuritypriv->dot118021XGrpPrivacy = _TKIP_;

drivers/staging/rtl8188eu/os_dep/usb_intf.c +1 -1

index 025cd0f59718..69f04fa0a189 100644
@@ -380,7 +380,7 @@ static struct adapter *rtw_usb_if1_init(struct dvobj_priv *dvobj,
 	/* 2012-07-11 Move here to prevent the 8723AS-VAU BT auto
 	 * suspend influence */
 	if (usb_autopm_get_interface(pusb_intf) < 0)
-			pr_debug("can't get autopm:\n");
+		pr_debug("can't get autopm:\n");
 
 	/*  alloc dev name after read efuse. */
 	rtw_init_netdev_name(pnetdev, padapter->registrypriv.ifname);

Signature · 1 line

2.18.0

Michael Straube

author

2018-07-31 11:34 UTC #2 lore raw

PATCH 3/7 staging: rtl8188eu: fix comparsions to NULL - style

In reply to Michael Straube

Use x instead of x != NULL.
Use !x instead of x == NULL.

Signed-off-by Michael Straube <[email protected]>

---
 drivers/staging/rtl8188eu/os_dep/os_intfs.c      |  2 +-
 drivers/staging/rtl8188eu/os_dep/usb_intf.c      |  6 +++---
 drivers/staging/rtl8188eu/os_dep/usb_ops_linux.c | 10 +++++-----
 drivers/staging/rtl8188eu/os_dep/xmit_linux.c    |  2 +-
 4 files changed, 10 insertions(+), 10 deletions(-)

drivers/staging/rtl8188eu/os_dep/os_intfs.c +1 -1

index 9b810c76d6de..62294bdc465e 100644
@@ -311,7 +311,7 @@ struct net_device *rtw_init_netdev(struct adapter *old_padapter)
 
 	RT_TRACE(_module_os_intfs_c_, _drv_info_, ("+init_net_dev\n"));
 
-	if (old_padapter != NULL)
+	if (old_padapter)
 		pnetdev = rtw_alloc_etherdev_with_old_priv((void *)old_padapter);
 
 	if (!pnetdev)

drivers/staging/rtl8188eu/os_dep/usb_intf.c +3 -3

index 69f04fa0a189..28cbd6b3d26c 100644
@@ -325,7 +325,7 @@ static struct adapter *rtw_usb_if1_init(struct dvobj_priv *dvobj,
 	int status = _FAIL;
 
 	padapter = vzalloc(sizeof(*padapter));
-	if (padapter == NULL)
+	if (!padapter)
 		goto exit;
 	padapter->dvobj = dvobj;
 	dvobj->if1 = padapter;

@@ -334,14 +334,14 @@ static struct adapter *rtw_usb_if1_init(struct dvobj_priv *dvobj,
 	mutex_init(&padapter->hw_init_mutex);
 
 	pnetdev = rtw_init_netdev(padapter);
-	if (pnetdev == NULL)
+	if (!pnetdev)
 		goto free_adapter;
 	SET_NETDEV_DEV(pnetdev, dvobj_to_dev(dvobj));
 	padapter = rtw_netdev_priv(pnetdev);
 
 	if (padapter->registrypriv.monitor_enable) {
 		pmondev = rtl88eu_mon_init();
-		if (pmondev == NULL)
+		if (!pmondev)
 			netdev_warn(pnetdev, "Failed to initialize monitor interface");
 		padapter->pmondev = pmondev;
 	}

drivers/staging/rtl8188eu/os_dep/usb_ops_linux.c +5 -5

index c69edb7d174c..a59eb017227f 100644
@@ -58,7 +58,7 @@ static int recvbuf2recvframe(struct adapter *adapt, struct sk_buff *pskb)
 		prxstat = (struct recv_stat *)pbuf;
 
 		precvframe = rtw_alloc_recvframe(pfree_recv_queue);
-		if (precvframe == NULL) {
+		if (!precvframe) {
 			RT_TRACE(_module_rtl871x_recv_c_, _drv_err_, ("recvbuf2recvframe: precvframe==NULL\n"));
 			DBG_88E("%s()-%d: rtw_alloc_recvframe() failed! RX Drop!\n", __func__, __LINE__);
 			goto _exit_recvbuf2recvframe;

@@ -436,16 +436,16 @@ u32 usb_read_port(struct adapter *adapter, u32 addr, struct recv_buf *precvbuf)
 		return _FAIL;
 	}
 
-	if ((!precvbuf->reuse) || (precvbuf->pskb == NULL)) {
+	if ((!precvbuf->reuse) || (!precvbuf->pskb)) {
 		precvbuf->pskb = skb_dequeue(&precvpriv->free_recv_skb_queue);
-		if (precvbuf->pskb != NULL)
+		if (precvbuf->pskb)
 			precvbuf->reuse = true;
 	}
 
 	/* re-assign for linux based on skb */
-	if ((!precvbuf->reuse) || (precvbuf->pskb == NULL)) {
+	if ((!precvbuf->reuse) || (!precvbuf->pskb)) {
 		precvbuf->pskb = netdev_alloc_skb(adapter->pnetdev, MAX_RECVBUF_SZ);
-		if (precvbuf->pskb == NULL) {
+		if (!precvbuf->pskb) {
 			RT_TRACE(_module_hci_ops_os_c_, _drv_err_, ("init_recvbuf(): alloc_skb fail!\n"));
 			DBG_88E("#### usb_read_port() alloc_skb fail!#####\n");
 			return _FAIL;

drivers/staging/rtl8188eu/os_dep/xmit_linux.c +1 -1

index 85cde696d369..d8ef9b5d81a8 100644
@@ -19,7 +19,7 @@ int rtw_os_xmit_resource_alloc(struct adapter *padapter, struct xmit_buf *pxmitb
 	int i;
 
 	pxmitbuf->pallocated_buf = kzalloc(alloc_sz, GFP_KERNEL);
-	if (pxmitbuf->pallocated_buf == NULL)
+	if (!pxmitbuf->pallocated_buf)
 		return _FAIL;
 
 	pxmitbuf->pbuf = PTR_ALIGN(pxmitbuf->pallocated_buf, XMITBUF_ALIGN_SZ);

Signature · 1 line

2.18.0

Michael Straube

author

2018-07-31 11:34 UTC #3 lore raw

PATCH 4/7 staging: rtl8188eu: remove unnecessary parentheses - style

In reply to Michael Straube

Remove unnecessary parentheses to improve readability.

Signed-off-by Michael Straube <[email protected]>

---
 drivers/staging/rtl8188eu/os_dep/usb_ops_linux.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

drivers/staging/rtl8188eu/os_dep/usb_ops_linux.c +2 -2

index a59eb017227f..5ddfc2ead127 100644
@@ -436,14 +436,14 @@ u32 usb_read_port(struct adapter *adapter, u32 addr, struct recv_buf *precvbuf)
 		return _FAIL;
 	}
 
-	if ((!precvbuf->reuse) || (!precvbuf->pskb)) {
+	if (!precvbuf->reuse || !precvbuf->pskb) {
 		precvbuf->pskb = skb_dequeue(&precvpriv->free_recv_skb_queue);
 		if (precvbuf->pskb)
 			precvbuf->reuse = true;
 	}
 
 	/* re-assign for linux based on skb */
-	if ((!precvbuf->reuse) || (!precvbuf->pskb)) {
+	if (!precvbuf->reuse || !precvbuf->pskb) {
 		precvbuf->pskb = netdev_alloc_skb(adapter->pnetdev, MAX_RECVBUF_SZ);
 		if (!precvbuf->pskb) {
 			RT_TRACE(_module_hci_ops_os_c_, _drv_err_, ("init_recvbuf(): alloc_skb fail!\n"));

Signature · 1 line

2.18.0

Michael Straube

author

2018-07-31 11:34 UTC #4 lore raw

PATCH 5/7 staging: rtl8188eu: remove unused rtw_add_bcn_ie()

In reply to Michael Straube

The function rtw_add_bcn_ie() is never used, so remove it. Discovered by cppcheck.

Signed-off-by Michael Straube <[email protected]>

---
 drivers/staging/rtl8188eu/core/rtw_ap.c    | 66 ----------------------
 drivers/staging/rtl8188eu/include/rtw_ap.h |  2 -
 2 files changed, 68 deletions(-)

drivers/staging/rtl8188eu/core/rtw_ap.c +0 ~~-66~~

index 220b4bbe1f84..82fb1b028fa0 100644
@@ -145,72 +145,6 @@ static void update_BCNTIM(struct adapter *padapter)
 	set_tx_beacon_cmd(padapter);
 }
 
-void rtw_add_bcn_ie(struct adapter *padapter, struct wlan_bssid_ex *pnetwork,
-		    u8 index, u8 *data, u8 len)
-{
-	struct ndis_802_11_var_ie *pIE;
-	u8 bmatch = false;
-	u8 *pie = pnetwork->ies;
-	u8 *p = NULL, *dst_ie = NULL, *premainder_ie = NULL;
-	u8 *pbackup_remainder_ie = NULL;
-	u32 i, offset, ielen = 0, ie_offset, remainder_ielen = 0;
-
-	for (i = sizeof(struct ndis_802_11_fixed_ie); i < pnetwork->ie_length;) {
-		pIE = (struct ndis_802_11_var_ie *)(pnetwork->ies + i);
-
-		if (pIE->ElementID > index) {
-			break;
-		/*  already exist the same IE */
-		} else if (pIE->ElementID == index) {
-			p = (u8 *)pIE;
-			ielen = pIE->Length;
-			bmatch = true;
-			break;
-		}
-		p = (u8 *)pIE;
-		ielen = pIE->Length;
-		i += (pIE->Length + 2);
-	}
-
-	if (p && ielen > 0) {
-		ielen += 2;
-
-		premainder_ie = p + ielen;
-
-		ie_offset = (int)(p - pie);
-
-		remainder_ielen = pnetwork->ie_length - ie_offset - ielen;
-
-		if (bmatch)
-			dst_ie = p;
-		else
-			dst_ie = p + ielen;
-	}
-
-	if (remainder_ielen > 0) {
-		pbackup_remainder_ie = rtw_malloc(remainder_ielen);
-		if (pbackup_remainder_ie && premainder_ie)
-			memcpy(pbackup_remainder_ie, premainder_ie,
-			       remainder_ielen);
-	}
-
-	*dst_ie++ = index;
-	*dst_ie++ = len;
-
-	memcpy(dst_ie, data, len);
-	dst_ie += len;
-
-	/* copy remainder IE */
-	if (pbackup_remainder_ie) {
-		memcpy(dst_ie, pbackup_remainder_ie, remainder_ielen);
-
-		kfree(pbackup_remainder_ie);
-	}
-
-	offset =  (uint)(dst_ie - pie);
-	pnetwork->ie_length = offset + remainder_ielen;
-}
-
 void rtw_remove_bcn_ie(struct adapter *padapter, struct wlan_bssid_ex *pnetwork,
 		       u8 index)
 {

drivers/staging/rtl8188eu/include/rtw_ap.h +0 -2

index bca41d68ce9d..f8f07257976c 100644
@@ -19,8 +19,6 @@ void rtw_indicate_sta_disassoc_event(struct adapter *padapter,
 				     struct sta_info *psta);
 void init_mlme_ap_info(struct adapter *padapter);
 void free_mlme_ap_info(struct adapter *padapter);
-void rtw_add_bcn_ie(struct adapter *padapter, struct wlan_bssid_ex *pnetwork,
-		    u8 index, u8 *data, u8 len);
 void rtw_remove_bcn_ie(struct adapter *padapter,
 		       struct wlan_bssid_ex *pnetwork, u8 index);
 void update_beacon(struct adapter *padapter, u8 ie_id,

Signature · 1 line

2.18.0

Michael Straube

author

2018-07-31 11:34 UTC #5 lore raw

PATCH 6/7 staging: rtl8188eu: remove unused rtw_remove_bcn_ie()

In reply to Michael Straube

The function rtw_remove_bcn_ie() is never used, so remove it. Discovered by cppcheck.

Signed-off-by Michael Straube <[email protected]>

---
 drivers/staging/rtl8188eu/core/rtw_ap.c    | 40 ----------------------
 drivers/staging/rtl8188eu/include/rtw_ap.h |  2 --
 2 files changed, 42 deletions(-)

drivers/staging/rtl8188eu/core/rtw_ap.c +0 ~~-40~~

index 82fb1b028fa0..676d549ef786 100644
@@ -145,46 +145,6 @@ static void update_BCNTIM(struct adapter *padapter)
 	set_tx_beacon_cmd(padapter);
 }
 
-void rtw_remove_bcn_ie(struct adapter *padapter, struct wlan_bssid_ex *pnetwork,
-		       u8 index)
-{
-	u8 *p, *dst_ie = NULL, *premainder_ie = NULL;
-	u8 *pbackup_remainder_ie = NULL;
-	uint offset, ielen, ie_offset, remainder_ielen = 0;
-	u8	*pie = pnetwork->ies;
-
-	p = rtw_get_ie(pie + _FIXED_IE_LENGTH_, index, &ielen,
-		       pnetwork->ie_length - _FIXED_IE_LENGTH_);
-	if (p && ielen > 0) {
-		ielen += 2;
-
-		premainder_ie = p + ielen;
-
-		ie_offset = (int)(p - pie);
-
-		remainder_ielen = pnetwork->ie_length - ie_offset - ielen;
-
-		dst_ie = p;
-	}
-
-	if (remainder_ielen > 0) {
-		pbackup_remainder_ie = rtw_malloc(remainder_ielen);
-		if (pbackup_remainder_ie && premainder_ie)
-			memcpy(pbackup_remainder_ie, premainder_ie,
-			       remainder_ielen);
-	}
-
-	/* copy remainder IE */
-	if (pbackup_remainder_ie) {
-		memcpy(dst_ie, pbackup_remainder_ie, remainder_ielen);
-
-		kfree(pbackup_remainder_ie);
-	}
-
-	offset =  (uint)(dst_ie - pie);
-	pnetwork->ie_length = offset + remainder_ielen;
-}
-
 static u8 chk_sta_is_alive(struct sta_info *psta)
 {
 	u8 ret = false;

drivers/staging/rtl8188eu/include/rtw_ap.h +0 -2

index f8f07257976c..7a4203bce473 100644
@@ -19,8 +19,6 @@ void rtw_indicate_sta_disassoc_event(struct adapter *padapter,
 				     struct sta_info *psta);
 void init_mlme_ap_info(struct adapter *padapter);
 void free_mlme_ap_info(struct adapter *padapter);
-void rtw_remove_bcn_ie(struct adapter *padapter,
-		       struct wlan_bssid_ex *pnetwork, u8 index);
 void update_beacon(struct adapter *padapter, u8 ie_id,
 		   u8 *oui, u8 tx);
 void add_RATid(struct adapter *padapter, struct sta_info *psta,

Signature · 1 line

2.18.0

Michael Straube

author

2018-07-31 11:34 UTC #6 lore raw

PATCH 7/7 staging: rtl8188eu: rename odm_RTL8188E - style

In reply to Michael Straube

Rename source and header file to avoid CamelCase.
odm_RTL8188E.c -> odm_rtl8188e.c
odm_RTL8188E.h -> odm_rtl8188e.h

Signed-off-by Michael Straube <[email protected]>

---
 drivers/staging/rtl8188eu/Makefile                              | 2 +-
 .../staging/rtl8188eu/hal/{odm_RTL8188E.c => odm_rtl8188e.c}    | 0
 drivers/staging/rtl8188eu/include/odm_precomp.h                 | 2 +-
 .../rtl8188eu/include/{odm_RTL8188E.h => odm_rtl8188e.h}        | 0
 4 files changed, 2 insertions(+), 2 deletions(-)
 rename drivers/staging/rtl8188eu/hal/{odm_RTL8188E.c => odm_rtl8188e.c} (100%)
 rename drivers/staging/rtl8188eu/include/{odm_RTL8188E.h => odm_rtl8188e.h} (100%)

drivers/staging/rtl8188eu/Makefile +1 -1

index aa6ea65d05fe..4e606b03ec03 100644
@@ -29,7 +29,7 @@ r8188eu-y :=				\
 		hal/hal_com.o		\
 		hal/odm.o		\
 		hal/odm_HWConfig.o	\
-		hal/odm_RTL8188E.o	\
+		hal/odm_rtl8188e.o	\
 		hal/rtl8188e_cmd.o	\
 		hal/rtl8188e_dm.o	\
 		hal/rtl8188e_hal_init.o	\

drivers/staging/rtl8188eu/hal/odm_rtl8188e.c renamed from drivers/staging/rtl8188eu/hal/odm_RTL8188E.c +0 -0

similarity index 100%
rename from drivers/staging/rtl8188eu/hal/odm_RTL8188E.c
rename to drivers/staging/rtl8188eu/hal/odm_rtl8188e.c

drivers/staging/rtl8188eu/include/odm_precomp.h +1 -1

index f00967fd9599..4d0dd12645bd 100644
@@ -31,7 +31,7 @@
 
 #include "odm_reg.h"
 
-#include "odm_RTL8188E.h"
+#include "odm_rtl8188e.h"
 
 void odm_CmnInfoHook_Debug(struct odm_dm_struct *pDM_Odm);
 void odm_CmnInfoInit_Debug(struct odm_dm_struct *pDM_Odm);

drivers/staging/rtl8188eu/include/odm_rtl8188e.h renamed from drivers/staging/rtl8188eu/include/odm_RTL8188E.h +0 -0

similarity index 100%
rename from drivers/staging/rtl8188eu/include/odm_RTL8188E.h
rename to drivers/staging/rtl8188eu/include/odm_rtl8188e.h

Signature · 1 line

2.18.0