mlx5: spelling fixes

Fix spelling errors in messages and comments.

Signed-off-by Stephen Hemminger <[email protected]>

---

 drivers/net/mlx5/mlx5_ethdev.c |  2 +-
 drivers/net/mlx5/mlx5_flow.c   |  4 ++--
 drivers/net/mlx5/mlx5_mr.c     |  8 ++++----
 drivers/net/mlx5/mlx5_rxq.c    | 20 ++++++++++----------
 drivers/net/mlx5/mlx5_rxtx.c   |  2 +-
 5 files changed, 18 insertions(+), 18 deletions(-)

drivers/net/mlx5/mlx5_ethdev.c +1 -1

index 34c5b95ee6d2..2c838e6539b6 100644
@@ -1138,7 +1138,7 @@ mlx5_dev_interrupt_handler_install(struct rte_eth_dev *dev)
 	}
 	ret = mlx5_socket_init(dev);
 	if (ret)
-		DRV_LOG(ERR, "port %u cannot initialise socket: %s",
+		DRV_LOG(ERR, "port %u cannot initialize socket: %s",
 			dev->data->port_id, strerror(rte_errno));
 	else if (priv->primary_socket) {
 		priv->intr_handle_socket.fd = priv->primary_socket;

drivers/net/mlx5/mlx5_flow.c +2 -2

index b94c442ec4e6..d13178be6ba1 100644
@@ -1090,7 +1090,7 @@ mlx5_flow_item_ipv6(const struct rte_flow_item *item, struct rte_flow *flow,
 					  item,
 					  "L3 cannot follow an L4 layer.");
 	/*
-	 * IPv6 is not recognised by the NIC inside a GRE tunnel.
+	 * IPv6 is not recognized by the NIC inside a GRE tunnel.
 	 * Such support has to be disabled as the rule will be
 	 * accepted.  Issue reproduced with Mellanox OFED 4.3-3.0.2.1 and
 	 * Mellanox OFED 4.4-1.0.0.0.

@@ -1100,7 +1100,7 @@ mlx5_flow_item_ipv6(const struct rte_flow_item *item, struct rte_flow *flow,
 					  RTE_FLOW_ERROR_TYPE_ITEM,
 					  item,
 					  "IPv6 inside a GRE tunnel is"
-					  " not recognised.");
+					  " not recognized.");
 	if (!mask)
 		mask = &rte_flow_item_ipv6_mask;
 	ret = mlx5_flow_item_acceptable

drivers/net/mlx5/mlx5_mr.c +4 -4

index 1d1bcb5fe028..aa7ca355b4d8 100644
@@ -446,7 +446,7 @@ mr_free(struct mlx5_mr *mr)
 }
 
 /**
- * Releass resources of detached MR having no online entry.
+ * Release resources of detached MR having no online entry.
  *
  * @param dev
  *   Pointer to Ethernet device.

@@ -496,7 +496,7 @@ mr_find_contig_memsegs_cb(const struct rte_memseg_list *msl,
 }
 
 /**
- * Create a new global Memroy Region (MR) for a missing virtual address.
+ * Create a new global Memory Region (MR) for a missing virtual address.
  * Register entire virtually contiguous memory chunk around the address.
  *
  * @param dev

@@ -553,7 +553,7 @@ mlx5_mr_create(struct rte_eth_dev *dev, struct mlx5_mr_cache *entry,
 	 * Find out a contiguous virtual address chunk in use, to which the
 	 * given address belongs, in order to register maximum range. In the
 	 * best case where mempools are not dynamically recreated and
-	 * '--socket-mem' is speicified as an EAL option, it is very likely to
+	 * '--socket-mem' is specified as an EAL option, it is very likely to
 	 * have only one MR(LKey) per a socket and per a hugepage-size even
 	 * though the system memory is highly fragmented.
 	 */

@@ -604,7 +604,7 @@ mlx5_mr_create(struct rte_eth_dev *dev, struct mlx5_mr_cache *entry,
 	bmp_mem = RTE_PTR_ALIGN_CEIL(mr + 1, RTE_CACHE_LINE_SIZE);
 	mr->ms_bmp = rte_bitmap_init(ms_n, bmp_mem, bmp_size);
 	if (mr->ms_bmp == NULL) {
-		DEBUG("port %u unable to initialize bitamp for a new MR of"
+		DEBUG("port %u unable to initialize bitmap for a new MR of"
 		      " address (%p).",
 		      dev->data->port_id, (void *)addr);
 		rte_errno = EINVAL;

drivers/net/mlx5/mlx5_rxq.c +10 -10

index 16e1641d00bc..7c2d65ff2007 100644
@@ -751,7 +751,7 @@ mlx5_rx_intr_disable(struct rte_eth_dev *dev, uint16_t rx_queue_id)
  *   Queue index in DPDK Rx queue array
  *
  * @return
- *   The Verbs object initialised, NULL otherwise and rte_errno is set.
+ *   The Verbs object initialized, NULL otherwise and rte_errno is set.
  */
 struct mlx5_rxq_ibv *
 mlx5_rxq_ibv_new(struct rte_eth_dev *dev, uint16_t idx)

@@ -1179,7 +1179,7 @@ mlx5_mprq_free_mp(struct rte_eth_dev *dev)
 
 /**
  * Allocate a mempool for Multi-Packet RQ. All configured Rx queues share the
- * mempool. If already allocated, reuse it if there're enough elements.
+ * mempool. If already allocated, reuse it if there are enough elements.
  * Otherwise, resize it.
  *
  * @param dev

@@ -1234,7 +1234,7 @@ mlx5_mprq_alloc_mp(struct rte_eth_dev *dev)
 	 */
 	desc *= 4;
 	obj_num = desc + MLX5_MPRQ_MP_CACHE_SZ * priv->rxqs_n;
-	/* Check a mempool is already allocated and if it can be resued. */
+	/* Check a mempool is already allocated and if it can be reused. */
 	if (mp != NULL && mp->elt_size >= obj_size && mp->size >= obj_num) {
 		DRV_LOG(DEBUG, "port %u mempool %s is being reused",
 			dev->data->port_id, mp->name);

@@ -1583,7 +1583,7 @@ mlx5_rxq_verify(struct rte_eth_dev *dev)
  *   Number of queues in the array.
  *
  * @return
- *   The Verbs object initialised, NULL otherwise and rte_errno is set.
+ *   The Verbs object initialized, NULL otherwise and rte_errno is set.
  */
 struct mlx5_ind_table_ibv *
 mlx5_ind_table_ibv_new(struct rte_eth_dev *dev, const uint16_t *queues,

@@ -1613,7 +1613,7 @@ mlx5_ind_table_ibv_new(struct rte_eth_dev *dev, const uint16_t *queues,
 		ind_tbl->queues[i] = queues[i];
 	}
 	ind_tbl->queues_n = queues_n;
-	/* Finalise indirection table. */
+	/* Finalize indirection table. */
 	for (j = 0; i != (unsigned int)(1 << wq_n); ++i, ++j)
 		wq[i] = wq[j];
 	ind_tbl->ind_table = mlx5_glue->create_rwq_ind_table

@@ -1746,7 +1746,7 @@ mlx5_ind_table_ibv_verify(struct rte_eth_dev *dev)
  *   Number of queues.
  *
  * @return
- *   The Verbs object initialised, NULL otherwise and rte_errno is set.
+ *   The Verbs object initialized, NULL otherwise and rte_errno is set.
  */
 struct mlx5_hrxq *
 mlx5_hrxq_new(struct rte_eth_dev *dev,

@@ -1950,7 +1950,7 @@ mlx5_hrxq_ibv_verify(struct rte_eth_dev *dev)
  *   Pointer to Ethernet device.
  *
  * @return
- *   The Verbs object initialised, NULL otherwise and rte_errno is set.
+ *   The Verbs object initialized, NULL otherwise and rte_errno is set.
  */
 struct mlx5_rxq_ibv *
 mlx5_rxq_ibv_drop_new(struct rte_eth_dev *dev)

@@ -2009,7 +2009,7 @@ mlx5_rxq_ibv_drop_new(struct rte_eth_dev *dev)
  *   Pointer to Ethernet device.
  *
  * @return
- *   The Verbs object initialised, NULL otherwise and rte_errno is set.
+ *   The Verbs object initialized, NULL otherwise and rte_errno is set.
  */
 void
 mlx5_rxq_ibv_drop_release(struct rte_eth_dev *dev)

@@ -2032,7 +2032,7 @@ mlx5_rxq_ibv_drop_release(struct rte_eth_dev *dev)
  *   Pointer to Ethernet device.
  *
  * @return
- *   The Verbs object initialised, NULL otherwise and rte_errno is set.
+ *   The Verbs object initialized, NULL otherwise and rte_errno is set.
  */
 struct mlx5_ind_table_ibv *
 mlx5_ind_table_ibv_drop_new(struct rte_eth_dev *dev)

@@ -2096,7 +2096,7 @@ mlx5_ind_table_ibv_drop_release(struct rte_eth_dev *dev)
  *   Pointer to Ethernet device.
  *
  * @return
- *   The Verbs object initialised, NULL otherwise and rte_errno is set.
+ *   The Verbs object initialized, NULL otherwise and rte_errno is set.
  */
 struct mlx5_hrxq *
 mlx5_hrxq_drop_new(struct rte_eth_dev *dev)

drivers/net/mlx5/mlx5_rxtx.c +1 -1

index 2d14f8a6edbd..95cbc513ca7b 100644
@@ -1507,7 +1507,7 @@ txq_burst_empw(struct mlx5_txq_data *txq, struct rte_mbuf **pkts,
 			mpw.wqe->eseg.cs_flags = cs_flags;
 		} else {
 			/* Evaluate whether the next packet can be inlined.
-			 * Inlininig is possible when:
+			 * Inlining is possible when:
 			 * - length is less than configured value
 			 * - length fits for remaining space
 			 * - not required to fill the title WQEBB with dsegs

Signature · 1 line

2.18.0