Skip to contentSkip to conversation

drm/cirrus: flip default from 24bpp to 16bpp

PATCH In review Gerd Hoffmann 2 participants 2 messages Aug 8, 2018

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH v3 1/1 drm/cirrus: flip default from 24bpp to 16bpp

The problem with 24bpp is that it is a rather unusual depth these days, cirrus is pretty much the only relevant device still using that, and it is a endless source of issues. Wayland doesn't support it at all. Bugs in Xorg keep showing up.

Typically either 32bpp or 16bpp are used. Using 32bpp would limit the resolution to 800x600 due to hardware constrains. So lets go with 16bpp.

Also use the default depth for the framebuffer console and mode_info->preferred_depth.

---
 drivers/gpu/drm/cirrus/cirrus_drv.c   | 4 ++--
 drivers/gpu/drm/cirrus/cirrus_fbdev.c | 3 +--
 drivers/gpu/drm/cirrus/cirrus_mode.c  | 2 +-
 3 files changed, 4 insertions(+), 5 deletions(-)
drivers/gpu/drm/cirrus/cirrus_drv.c +2 -2
index 69c4e352dd..b4f7be056c 100644
@@ -16,11 +16,11 @@
 #include "cirrus_drv.h"
 
 int cirrus_modeset = -1;
-int cirrus_bpp = 24;
+int cirrus_bpp = 16;
 
 MODULE_PARM_DESC(modeset, "Disable/Enable modesetting");
 module_param_named(modeset, cirrus_modeset, int, 0400);
-MODULE_PARM_DESC(bpp, "Max bits-per-pixel (default:24)");
+MODULE_PARM_DESC(bpp, "Max bits-per-pixel (default:16)");
 module_param_named(bpp, cirrus_bpp, int, 0400);
 
 /*
drivers/gpu/drm/cirrus/cirrus_fbdev.c +1 -2
index 32fbfba2c6..b329a54290 100644
@@ -271,7 +271,6 @@ int cirrus_fbdev_init(struct cirrus_device *cdev)
 {
 	struct cirrus_fbdev *gfbdev;
 	int ret;
-	int bpp_sel = 24;
 
 	/*bpp_sel = 8;*/
 	gfbdev = kzalloc(sizeof(struct cirrus_fbdev), GFP_KERNEL);
@@ -296,7 +295,7 @@ int cirrus_fbdev_init(struct cirrus_device *cdev)
 	/* disable all the possible outputs/crtcs before entering KMS mode */
 	drm_helper_disable_unused_functions(cdev->dev);
 
-	return drm_fb_helper_initial_config(&gfbdev->helper, bpp_sel);
+	return drm_fb_helper_initial_config(&gfbdev->helper, cirrus_bpp);
 }
 
 void cirrus_fbdev_fini(struct cirrus_device *cdev)
drivers/gpu/drm/cirrus/cirrus_mode.c +1 -1
index c91b9b054e..91128b1d8d 100644
@@ -518,7 +518,7 @@ int cirrus_modeset_init(struct cirrus_device *cdev)
 	cdev->dev->mode_config.max_height = CIRRUS_MAX_FB_HEIGHT;
 
 	cdev->dev->mode_config.fb_base = cdev->mc.vram_base;
-	cdev->dev->mode_config.preferred_depth = 24;
+	cdev->dev->mode_config.preferred_depth = cirrus_bpp;
 	/* don't prefer a shadow on virt GPU */
 	cdev->dev->mode_config.prefer_shadow = 0;
 
Signature · 6 lines
2.9.3

_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel
Reviewed-by on v3 1/1
#1 lore raw
Quoted 1 line · Gerd Hoffmann

The problem with 24bpp is that it is a rather unusual depth these days,

Nit: s/depth/bpp/ here. Depth 24 is very common, it's packing that into three bytes per pixel that's unusual.

Quoted 11 lines

cirrus is pretty much the only relevant device still using that, and it is a endless source of issues. Wayland doesn't support it at all. Bugs in Xorg keep showing up.

Typically either 32bpp or 16bpp are used. Using 32bpp would limit the resolution to 800x600 due to hardware constrains. So lets go with 16bpp.

Also use the default depth for the framebuffer console and mode_info->preferred_depth.

- ajax
_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel