Skip to contentSkip to conversation

mtd: nand: Changes for 4.19

DISCUSSION Miquel Raynal 2 participants 2 messages Aug 1, 2018 – Aug 11, 2018 Memory technology devices (MTD)

lore
Share & tools
lore

Miquel Raynal

author maintainer
#0 lore raw

The following changes since commit 021c91791a5e7e85c567452f1be3e4c2c6cb6063:

Linux 4.18-rc3 (2018-07-01 16:04:53 -0700)

are available in the git repository at:

git://git.infradead.org/linux-mtd.git tags/nand/for-4.19

for you to fetch changes up to ed128e8b757b4e759e5585df720888b30a7f2196:

MAINTAINERS: drop Wenyou Yang from Atmel NAND driver support (2018-08-01 09:46:09 +0200)

----------------------------------------------------------------
NAND core changes:
- Add the SPI-NAND framework.
- Create a helper to find the best ECC configuration.
- Create NAND controller operations.
- Allocate dynamically ONFI parameters structure.
- Add defines for ONFI version bits.
- Add manufacturer fixup for ONFI parameter page.
- Add an option to specify NAND chip as a boot device.
- Add Reed-Solomon error correction algorithm.
- Better name for the controller structure.
- Remove unused caller_is_module() definition.
- Make subop helpers return unsigned values.
- Expose _notsupp() helpers for raw page accessors.
- Add default values for dynamic timings.
- Kill the chip->scan_bbt() hook.
- Rename nand_default_bbt() into nand_create_bbt().
- Start to clean the nand_chip structure.
- Remove stale prototype from rawnand.h.

Raw NAND controllers drivers changes:
- Qcom: structuring cleanup.
- Denali: use core helper to find the best ECC configuration.
- Possible build of almost all drivers by adding a dependency on COMPILE_TEST for almost all of them in Kconfig, implies various fixes, Kconfig cleanup, GPIO headers inclusion cleanup, and even changes in sparc64 and ia64 architectures.
- Clean the ->probe() functions error path of a lot of drivers.
- Migrate all drivers to use nand_scan() instead of nand_scan_ident()/nand_scan_tail() pair.
- Use mtd_device_register() where applicable to simplify the code.
- Marvell:
* Handle on-die ECC.
* Better clocks handling.
* Remove bogus comment.
* Add suspend and resume support.
- Tegra: add NAND controller driver.
- Atmel:
* Add module param to avoid using dma.
* Drop Wenyou Yang from MAINTAINERS.
- Denali: optimize timings handling.
- FSMC: Stop using chip->read_buf().
- FSL:
* Switch to SPDX license tag identifiers.
* Fix qualifiers in MXC init functions.

Raw NAND chip drivers changes:
- Micron:
* Add fixup for ONFI revision.
* Update ecc_stats.corrected.
* Make ECC activation stateful.
* Avoid enabling/disabling ECC when it can't be disabled.
* Get the actual number of bitflips.
* Allow forced on-die ECC.
* Support 8/512 on-die ECC.
* Fix on-die ECC detection logic.
- Hynix:
* Fix decoding the OOB size on H27UCG8T2BTR.
* Use ->exec_op() in hynix_nand_reg_write_op().

----------------------------------------------------------------
Abhishek Sahu (15):
mtd: rawnand: helper function for setting up ECC configuration
mtd: rawnand: denali: use helper function for ecc setup
dt-bindings: qcom_nandc: update for ECC strength and step size
mtd: rawnand: qcom: remove dt property nand-ecc-step-size
mtd: rawnand: qcom: use the ecc strength from device parameter
mtd: rawnand: qcom: wait for desc completion in all BAM channels
mtd: rawnand: qcom: erased page detection for uncorrectable errors only
mtd: rawnand: qcom: fix null pointer access for erased page detection
mtd: rawnand: qcom: parse read errors for read oob also
mtd: rawnand: qcom: modify write_oob to remove read codeword part
mtd: rawnand: qcom: fix return value for raw page read
mtd: rawnand: qcom: check for operation errors in case of raw read
mtd: rawnand: qcom: code reorganization for raw read
mtd: rawnand: provide only single helper function for ECC conf
mtd: rawnand: qcom: erased page bitflips detection

Anders Roxell (1):
drivers/memory/Kconfig: Add CONFIG_OF dependency

Arnd Bergmann (4):
mtd: rawnand: MTD_NAND_BCM47XXNFLASH needs CONFIG_BCMA
mtd: rawnand: qcom: stop using phys_to_dma()
ia64: use asm-generic/io.h
sparc64: add reads{b,w,l}/writes{b,w,l}

Boris Brezillon (60):
mtd: rawnand: micron: Update ecc_stats.corrected
dt-bindings: Add bindings for SPI NAND devices
mtd: spinand: Add initial support for the MX35LF1GE4AB chip
mtd: rawnand: gpmi: Remove useless dependency on MTD_NAND
mtd: rawnand: Add 'depends on HAS_IOMEM' where missing
mtd: rawnand: omap2: Allow selection of this driver when COMPILE_TEST=y
mtd: rawnand: sharpsl: Remove inclusion of mach and asm headers
mtd: rawnand: sharpsl: Allow selection of this driver when COMPILE_TEST=y
mtd: rawnand: lpc32xx: Allow selection of these drivers when COMPILE_TEST=y
mtd: rawnand: brcmnand: Allow selection of this driver when COMPILE_TEST=y
mtd: rawnand: mxc: Avoid inclusion of asm/mach headers
mtd: rawnand: mxc: Allow selection of this driver when COMPILE_TEST=y
mtd: rawnand: qcom: Allow selection of this driver when COMPILE_TEST=y
mtd: rawnand: nuc900: Allow selection of this driver when COMPILE_TEST=y
bcma: Allow selection of this driver when COMPILE_TEST=y
mtd: rawnand: Kill cafe_nand_bug()
mtd: rawnand: Remove nand_do_read() prototype from rawnand.h
mtd: rawnand: Remove forward declaration of mtd_info
mtd: rawnand: Remove forward declaration of device_node
mtd: rawnand: Rename nand_default_bbt() into nand_create_bbt()
mtd: rawnand: Kill the chip->scan_bbt() hook
mtd: rawnand: orion_nand: Kill orion_nand_data.dev_ready()
mtd: rawnand: plat_nand: Kill pdata->ctrl.{hwcontrol, read_byte}()
mtd: rawnand: hynix: Use ->exec_op() in hynix_nand_reg_write_op()
mtd: rawnand: atmel: Use uintptr_t casts instead of unsigned int
mtd: rawnand: atmel: Add an __iomem cast on gen_pool_dma_alloc() call
mtd: rawnand: atmel: Allow selection of this driver when COMPILE_TEST=y
mtd: rawnand: davinci: Stop doing iomem pointer <-> u32 conversions
mtd: rawnand: davinci: Use uintptr_t casts instead of unsigned ones
mtd: rawnand: davinci: Allow selection of this driver when COMPILE_TEST=y
mtd: rawnand: sunxi: Add an U suffix to NFC_PAGE_OP definition
mtd: rawnand: sunxi: Make sure ret is initialized in sunxi_nfc_read_byte()
mtd: rawnand: sunxi: Allow selection of this driver when COMPILE_TEST=y
mtd: rawnand: fscm: Avoid collision on PC def when compiling for MIPS
mtd: rawnand: fsmc: Use uintptr_t casts instead of unsigned ones
mtd: rawnand: fsmc: Allow selection of this driver when COMPILE_TEST=y
memory: fsl_ifc: Allow selection of this driver when COMPILE_TEST=y
mtd: rawnand: fsl_ifc: Add an __iomem specifier on eccstat_regs
mtd: rawnand: fsl_ifc: Allow selection of this driver when COMPILE_TEST=y
MIPS: txx9: Move the ndfc.h header to include/linux/platform_data/txx9
mtd: rawnand: txx9ndfmc: Allow selection of this driver when COMPILE_TEST=y
MIPS: jz4740: Move jz4740_nand.h header to include/linux/platform_data/jz4740
mtd: rawnand: jz4740: Allow selection of this driver when COMPILE_TEST=y
mtd: rawnand: jz4780: Drop the dependency on MACH_JZ4780
mtd: rawnand: jz4740: Use the proper format specifier to print chipnr
memory: jz4780-nemc: Allow selection of this driver when COMPILE_TEST=y
mtd: rawnand: fsmc: Stop using chip->read_buf()
mtd: rawnand: micron: Fix on-die ECC detection logic
mtd: rawnand: Expose _notsupp() helpers for raw page accessors
mtd: rawnand: micron: Get the actual number of bitflips
mtd: rawnand: micron: Avoid enabling/disabling ECC when it can't be disabled
mtd: rawnand: micron: Make ECC activation stateful
mtd: rawnand: orion: Avoid direct inclusion of asm headers
mtd: rawnand: orion: Handle cases where __LINUX_ARM_ARCH__ is not defined
mtd: rawnand: s3c2410: Error out when ->nrsets < 0 or ->sets == NULL
mtd: rawnand: Remove unused caller_is_module() definition
mtd: rawnand: jz4740: Include gpio/consumer.h instead of gpio.h
mtd: rawnand: sunxi: Remove gpio.h and of_gpio.h inclusions
mtd: rawnand: atmel: Stop including gpio.h
mtd: rawnand: au1550nd: Remove unneeded gpio.h inclusion

Chris Packham (6):
mtd: rawnand: marvell: Handle on-die ECC
mtd: rawnand: add manufacturer fixup for ONFI parameter page
mtd: rawnand: add defines for ONFI version bits
mtd: rawnand: micron: add fixup for ONFI revision
mtd: rawnand: micron: support 8/512 on-die ECC
mtd: rawnand: micron: allow forced on-die ECC

Colin Ian King (1):
mtd: rawnand: gpmi: remove redundant variable payload_virt

Daniel Mack (3):
mtd: rawnand: marvell: add suspend and resume hooks
mtd: rawnand: marvell: remove bogus comment in marvell_nfc_select_chip()
mtd: rawnand: marvell: set reg_clk to NULL if it can't be obtained

Fabio Estevam (2):
mtd: rawnand: gpmi: Switch to SPDX identifier
mtd: rawnand: mxc: Switch to SPDX identifier

Frieder Schrempf (1):
mtd: spinand: Add initial support for Winbond W25M02GV

Martin Blumenstingl (1):
mtd: rawnand: hynix: fix decoding the OOB size on H27UCG8T2BTR

Martin Kaiser (1):
mtd: rawnand: mxc: remove __init qualifier from mxcnd_probe_dt

Masahiro Yamada (4):
mtd: rawnand: denali_dt: use dev as a shorthand of &pdev->dev
dt-binding: mtd: denali_dt: document clock property
mtd: rawnand: denali_dt: add more clocks based on IP datasheet
mtd: rawnand: denali: optimize timing parameters for data interface

Miquel Raynal (48):
mtd: spinand: macronix: Add support for MX35LF2GE4AB
mtd: rawnand: docg4: fix the probe function error path
mtd: rawnand: fix indentation in Kconfig
mtd: rawnand: add default values for dynamic timings
mtd: rawnand: make subop helpers return unsigned values
mtd: rawnand: better name for the controller structure
mtd: rawnand: add hooks that may be called during nand_scan()
mtd: rawnand: davinci: convert driver to nand_scan()
mtd: rawnand: denali: convert to nand_scan()
mtd: rawnand: fsl_elbc: return meaningful values
mtd: rawnand: fsl_elbc: convert driver to nand_scan()
mtd: rawnand: fsl_ifc: convert driver to nand_scan()
mtd: rawnand: fsmc: convert driver to nand_scan()
mtd: rawnand: gpmi: convert driver to nand_scan()
mtd: rawnand: hisi504: convert driver to nand_scan()
mtd: rawnand: jz4780: convert driver to nand_scan()
mtd: rawnand: lpc32xx_slc: convert driver to nand_scan()
mtd: rawnand: marvell: convert driver to nand_scan()
mtd: rawnand: mtk: convert driver to nand_scan()
mtd: rawnand: mxc: convert driver to nand_scan()
mtd: rawnand: nandsim: convert driver to nand_scan()
mtd: rawnand: s3c2410: convert driver to nand_scan()
mtd: rawnand: sh_flctl: convert driver to nand_scan()
mtd: rawnand: sunxi: convert driver to nand_scan()
mtd: rawnand: tango: convert driver to nand_scan()
mtd: rawnand: txx9ndfmc: rename nand controller internal structure
mtd: rawnand: vf610: convert driver to nand_scan()
mtd: rawnand: sm_common: fix the probe function error path
mtd: rawnand: sm_common: convert driver to nand_scan_with_ids()
mtd: rawnand: qcom: convert driver to nand_scan()
mtd: rawnand: brcmnand: convert driver to nand_scan()
mtd: rawnand: cafe: convert driver to nand_scan()
mtd: rawnand: lpc32xx_mlc: convert driver to nand_scan()
mtd: rawnand: omap2: convert driver to nand_scan()
mtd: rawnand: atmel: clarify NAND addition/removal paths
mtd: rawnand: atmel: convert driver to nand_scan()
mtd: rawnand: do not execute nand_scan_ident() if maxchips is zero
mtd: rawnand: docg4: convert driver to nand_scan()
mtd: rawnand: jz4740: fix probe function error path
mtd: rawnand: jz4740: group nand_scan_{ident, tail} calls
mtd: rawnand: jz4740: convert driver to nand_scan()
mtd: rawnand: tegra: convert driver to nand_scan()
mtd: rawnand: txx9ndfmc: clarify ECC parameters assignation
mtd: rawnand: txx9ndfmc: convert driver to nand_scan()
mtd: rawnand: do not export nand_scan_[ident|tail]() anymore
mtd: rawnand: allocate model parameter dynamically
mtd: rawnand: allocate dynamically ONFI parameters during detection
MAINTAINERS: drop Wenyou Yang from Atmel NAND driver support

Peter Pan (2):
mtd: nand: Add core infrastructure to support SPI NANDs
mtd: spinand: Add initial support for Micron MT29F2G01ABAGD

Peter Rosin (1):
mtd: rawnand: atmel: add module param to avoid using dma

Rafał Miłecki (2):
mtd: rawnand: use mtd_device_register() where applicable
mtd: onenand: use mtd_device_register() where applicable

Stefan Agner (5):
mtd: rawnand: add Reed-Solomon error correction algorithm
mtd: rawnand: add an option to specify NAND chip as a boot device
dt-bindings: mtd: add tegra NAND controller binding
mtd: rawnand: add NVIDIA Tegra NAND Flash controller driver
mtd: rawnand: tegra: check bounds of die_nr properly

 .../devicetree/bindings/mtd/denali-nand.txt        |    5 +
 Documentation/devicetree/bindings/mtd/nand.txt     |    6 +-
 .../bindings/mtd/nvidia-tegra20-nand.txt           |   64 +
 .../devicetree/bindings/mtd/qcom_nandc.txt         |    7 +-
 Documentation/devicetree/bindings/mtd/spi-nand.txt |    5 +
 MAINTAINERS                                        |    8 +-
 arch/arm/mach-pxa/balloon3.c                       |    1 -
 arch/arm/mach-pxa/em-x270.c                        |    1 -
 arch/ia64/include/asm/io.h                         |   13 +-
 arch/mips/jz4740/board-qi_lb60.c                   |    3 +-
 arch/mips/txx9/generic/setup.c                     |    2 +-
 arch/mips/txx9/generic/setup_tx4938.c              |    2 +-
 arch/mips/txx9/generic/setup_tx4939.c              |    2 +-
 arch/sparc/include/asm/io_64.h                     |   19 +-
 drivers/bcma/Kconfig                               |    3 +-
 drivers/memory/Kconfig                             |    6 +-
 drivers/mtd/nand/Kconfig                           |    1 +
 drivers/mtd/nand/Makefile                          |    1 +
 drivers/mtd/nand/onenand/generic.c                 |    5 +-
 drivers/mtd/nand/onenand/samsung.c                 |    5 +-
 drivers/mtd/nand/raw/Kconfig                       |  152 ++-
 drivers/mtd/nand/raw/Makefile                      |    1 +
 drivers/mtd/nand/raw/atmel/nand-controller.c       |  175 ++-
 drivers/mtd/nand/raw/au1550nd.c                    |    1 -
 drivers/mtd/nand/raw/brcmnand/brcmnand.c           |   67 +-
 drivers/mtd/nand/raw/cafe_nand.c                   |  143 ++-
 drivers/mtd/nand/raw/cmx270_nand.c                 |    4 +-
 drivers/mtd/nand/raw/cs553x_nand.c                 |    3 +-
 drivers/mtd/nand/raw/davinci_nand.c                |  231 ++--
 drivers/mtd/nand/raw/denali.c                      |  216 ++--
 drivers/mtd/nand/raw/denali.h                      |    1 +
 drivers/mtd/nand/raw/denali_dt.c                   |   72 +-
 drivers/mtd/nand/raw/denali_pci.c                  |    1 +
 drivers/mtd/nand/raw/diskonchip.c                  |    4 +-
 drivers/mtd/nand/raw/docg4.c                       |   89 +-
 drivers/mtd/nand/raw/fsl_elbc_nand.c               |   25 +-
 drivers/mtd/nand/raw/fsl_ifc_nand.c                |   25 +-
 drivers/mtd/nand/raw/fsmc_nand.c                   |  183 +--
 drivers/mtd/nand/raw/gpmi-nand/gpmi-lib.c          |   15 +-
 drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c         |   76 +-
 drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.h         |   11 +-
 drivers/mtd/nand/raw/hisi504_nand.c                |   78 +-
 drivers/mtd/nand/raw/jz4740_nand.c                 |   51 +-
 drivers/mtd/nand/raw/jz4780_nand.c                 |   41 +-
 drivers/mtd/nand/raw/lpc32xx_mlc.c                 |   61 +-
 drivers/mtd/nand/raw/lpc32xx_slc.c                 |   77 +-
 drivers/mtd/nand/raw/marvell_nand.c                |  302 +++--
 drivers/mtd/nand/raw/mtk_nand.c                    |   79 +-
 drivers/mtd/nand/raw/mxc_nand.c                    |  157 ++-
 drivers/mtd/nand/raw/nand_base.c                   |  343 ++++--
 drivers/mtd/nand/raw/nand_bbt.c                    |   10 +-
 drivers/mtd/nand/raw/nand_hynix.c                  |   23 +
 drivers/mtd/nand/raw/nand_micron.c                 |  351 +++++-
 drivers/mtd/nand/raw/nand_timings.c                |   32 +-
 drivers/mtd/nand/raw/nandsim.c                     |   84 +-
 drivers/mtd/nand/raw/ndfc.c                        |    4 +-
 drivers/mtd/nand/raw/omap2.c                       |  533 +++++----
 drivers/mtd/nand/raw/orion_nand.c                  |    9 +-
 drivers/mtd/nand/raw/oxnas_nand.c                  |    4 +-
 drivers/mtd/nand/raw/plat_nand.c                   |    2 -
 drivers/mtd/nand/raw/qcom_nandc.c                  |  595 ++++++----
 drivers/mtd/nand/raw/s3c2410.c                     |   52 +-
 drivers/mtd/nand/raw/sh_flctl.c                    |   36 +-
 drivers/mtd/nand/raw/sharpsl.c                     |    5 +-
 drivers/mtd/nand/raw/sm_common.c                   |   39 +-
 drivers/mtd/nand/raw/sunxi_nand.c                  |   55 +-
 drivers/mtd/nand/raw/tango_nand.c                  |   44 +-
 drivers/mtd/nand/raw/tegra_nand.c                  | 1246 ++++++++++++++++++++
 drivers/mtd/nand/raw/txx9ndfmc.c                   |   42 +-
 drivers/mtd/nand/raw/vf610_nfc.c                   |  127 +-
 drivers/mtd/nand/spi/Kconfig                       |    7 +
 drivers/mtd/nand/spi/Makefile                      |    3 +
 drivers/mtd/nand/spi/core.c                        | 1155 ++++++++++++++++++
 drivers/mtd/nand/spi/macronix.c                    |  144 +++
 drivers/mtd/nand/spi/micron.c                      |  133 +++
 drivers/mtd/nand/spi/winbond.c                     |  141 +++
 include/linux/mtd/rawnand.h                        |  126 +-
 include/linux/mtd/spinand.h                        |  421 +++++++
 .../linux/platform_data/jz4740}/jz4740_nand.h      |    4 +-
 include/linux/platform_data/mtd-orion_nand.h       |    1 -
 .../linux/platform_data}/txx9/ndfmc.h              |    6 +-
 include/linux/spi/spi-mem.h                        |    4 +-
 82 files changed, 6200 insertions(+), 2081 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/mtd/nvidia-tegra20-nand.txt
 create mode 100644 Documentation/devicetree/bindings/mtd/spi-nand.txt
 create mode 100644 drivers/mtd/nand/raw/tegra_nand.c
 create mode 100644 drivers/mtd/nand/spi/Kconfig
 create mode 100644 drivers/mtd/nand/spi/Makefile
 create mode 100644 drivers/mtd/nand/spi/core.c
 create mode 100644 drivers/mtd/nand/spi/macronix.c
 create mode 100644 drivers/mtd/nand/spi/micron.c
 create mode 100644 drivers/mtd/nand/spi/winbond.c
 create mode 100644 include/linux/mtd/spinand.h
 rename {arch/mips/include/asm/mach-jz4740 => include/linux/platform_data/jz4740}/jz4740_nand.h (91%)
 rename {arch/mips/include/asm => include/linux/platform_data}/txx9/ndfmc.h (91%)
#1 lore raw
Quoted 11 lines · On Wed, 1 Aug 2018 12:04:29 +0200 Miquel Raynal <[email protected]>…

The following changes since commit 021c91791a5e7e85c567452f1be3e4c2c6cb6063:

Linux 4.18-rc3 (2018-07-01 16:04:53 -0700)

are available in the git repository at:

git://git.infradead.org/linux-mtd.git tags/nand/for-4.19

for you to fetch changes up to ed128e8b757b4e759e5585df720888b30a7f2196:

MAINTAINERS: drop Wenyou Yang from Atmel NAND driver support (2018-08-01 09:46:09 +0200)

PR merged in mtd/next.

Thanks,

Boris

Quoted 352 lines

----------------------------------------------------------------
NAND core changes:
- Add the SPI-NAND framework.
- Create a helper to find the best ECC configuration.
- Create NAND controller operations.
- Allocate dynamically ONFI parameters structure.
- Add defines for ONFI version bits.
- Add manufacturer fixup for ONFI parameter page.
- Add an option to specify NAND chip as a boot device.
- Add Reed-Solomon error correction algorithm.
- Better name for the controller structure.
- Remove unused caller_is_module() definition.
- Make subop helpers return unsigned values.
- Expose _notsupp() helpers for raw page accessors.
- Add default values for dynamic timings.
- Kill the chip->scan_bbt() hook.
- Rename nand_default_bbt() into nand_create_bbt().
- Start to clean the nand_chip structure.
- Remove stale prototype from rawnand.h.

Raw NAND controllers drivers changes:
- Qcom: structuring cleanup.
- Denali: use core helper to find the best ECC configuration.
- Possible build of almost all drivers by adding a dependency on COMPILE_TEST for almost all of them in Kconfig, implies various fixes, Kconfig cleanup, GPIO headers inclusion cleanup, and even changes in sparc64 and ia64 architectures.
- Clean the ->probe() functions error path of a lot of drivers.
- Migrate all drivers to use nand_scan() instead of nand_scan_ident()/nand_scan_tail() pair.
- Use mtd_device_register() where applicable to simplify the code.
- Marvell:
* Handle on-die ECC.
* Better clocks handling.
* Remove bogus comment.
* Add suspend and resume support.
- Tegra: add NAND controller driver.
- Atmel:
* Add module param to avoid using dma.
* Drop Wenyou Yang from MAINTAINERS.
- Denali: optimize timings handling.
- FSMC: Stop using chip->read_buf().
- FSL:
* Switch to SPDX license tag identifiers.
* Fix qualifiers in MXC init functions.

Raw NAND chip drivers changes:
- Micron:
* Add fixup for ONFI revision.
* Update ecc_stats.corrected.
* Make ECC activation stateful.
* Avoid enabling/disabling ECC when it can't be disabled.
* Get the actual number of bitflips.
* Allow forced on-die ECC.
* Support 8/512 on-die ECC.
* Fix on-die ECC detection logic.
- Hynix:
* Fix decoding the OOB size on H27UCG8T2BTR.
* Use ->exec_op() in hynix_nand_reg_write_op().

----------------------------------------------------------------
Abhishek Sahu (15):
mtd: rawnand: helper function for setting up ECC configuration
mtd: rawnand: denali: use helper function for ecc setup
dt-bindings: qcom_nandc: update for ECC strength and step size
mtd: rawnand: qcom: remove dt property nand-ecc-step-size
mtd: rawnand: qcom: use the ecc strength from device parameter
mtd: rawnand: qcom: wait for desc completion in all BAM channels
mtd: rawnand: qcom: erased page detection for uncorrectable errors only
mtd: rawnand: qcom: fix null pointer access for erased page detection
mtd: rawnand: qcom: parse read errors for read oob also
mtd: rawnand: qcom: modify write_oob to remove read codeword part
mtd: rawnand: qcom: fix return value for raw page read
mtd: rawnand: qcom: check for operation errors in case of raw read
mtd: rawnand: qcom: code reorganization for raw read
mtd: rawnand: provide only single helper function for ECC conf
mtd: rawnand: qcom: erased page bitflips detection

Anders Roxell (1):
drivers/memory/Kconfig: Add CONFIG_OF dependency

Arnd Bergmann (4):
mtd: rawnand: MTD_NAND_BCM47XXNFLASH needs CONFIG_BCMA
mtd: rawnand: qcom: stop using phys_to_dma()
ia64: use asm-generic/io.h
sparc64: add reads{b,w,l}/writes{b,w,l}

Boris Brezillon (60):
mtd: rawnand: micron: Update ecc_stats.corrected
dt-bindings: Add bindings for SPI NAND devices
mtd: spinand: Add initial support for the MX35LF1GE4AB chip
mtd: rawnand: gpmi: Remove useless dependency on MTD_NAND
mtd: rawnand: Add 'depends on HAS_IOMEM' where missing
mtd: rawnand: omap2: Allow selection of this driver when COMPILE_TEST=y
mtd: rawnand: sharpsl: Remove inclusion of mach and asm headers
mtd: rawnand: sharpsl: Allow selection of this driver when COMPILE_TEST=y
mtd: rawnand: lpc32xx: Allow selection of these drivers when COMPILE_TEST=y
mtd: rawnand: brcmnand: Allow selection of this driver when COMPILE_TEST=y
mtd: rawnand: mxc: Avoid inclusion of asm/mach headers
mtd: rawnand: mxc: Allow selection of this driver when COMPILE_TEST=y
mtd: rawnand: qcom: Allow selection of this driver when COMPILE_TEST=y
mtd: rawnand: nuc900: Allow selection of this driver when COMPILE_TEST=y
bcma: Allow selection of this driver when COMPILE_TEST=y
mtd: rawnand: Kill cafe_nand_bug()
mtd: rawnand: Remove nand_do_read() prototype from rawnand.h
mtd: rawnand: Remove forward declaration of mtd_info
mtd: rawnand: Remove forward declaration of device_node
mtd: rawnand: Rename nand_default_bbt() into nand_create_bbt()
mtd: rawnand: Kill the chip->scan_bbt() hook
mtd: rawnand: orion_nand: Kill orion_nand_data.dev_ready()
mtd: rawnand: plat_nand: Kill pdata->ctrl.{hwcontrol, read_byte}()
mtd: rawnand: hynix: Use ->exec_op() in hynix_nand_reg_write_op()
mtd: rawnand: atmel: Use uintptr_t casts instead of unsigned int
mtd: rawnand: atmel: Add an __iomem cast on gen_pool_dma_alloc() call
mtd: rawnand: atmel: Allow selection of this driver when COMPILE_TEST=y
mtd: rawnand: davinci: Stop doing iomem pointer <-> u32 conversions
mtd: rawnand: davinci: Use uintptr_t casts instead of unsigned ones
mtd: rawnand: davinci: Allow selection of this driver when COMPILE_TEST=y
mtd: rawnand: sunxi: Add an U suffix to NFC_PAGE_OP definition
mtd: rawnand: sunxi: Make sure ret is initialized in sunxi_nfc_read_byte()
mtd: rawnand: sunxi: Allow selection of this driver when COMPILE_TEST=y
mtd: rawnand: fscm: Avoid collision on PC def when compiling for MIPS
mtd: rawnand: fsmc: Use uintptr_t casts instead of unsigned ones
mtd: rawnand: fsmc: Allow selection of this driver when COMPILE_TEST=y
memory: fsl_ifc: Allow selection of this driver when COMPILE_TEST=y
mtd: rawnand: fsl_ifc: Add an __iomem specifier on eccstat_regs
mtd: rawnand: fsl_ifc: Allow selection of this driver when COMPILE_TEST=y
MIPS: txx9: Move the ndfc.h header to include/linux/platform_data/txx9
mtd: rawnand: txx9ndfmc: Allow selection of this driver when COMPILE_TEST=y
MIPS: jz4740: Move jz4740_nand.h header to include/linux/platform_data/jz4740
mtd: rawnand: jz4740: Allow selection of this driver when COMPILE_TEST=y
mtd: rawnand: jz4780: Drop the dependency on MACH_JZ4780
mtd: rawnand: jz4740: Use the proper format specifier to print chipnr
memory: jz4780-nemc: Allow selection of this driver when COMPILE_TEST=y
mtd: rawnand: fsmc: Stop using chip->read_buf()
mtd: rawnand: micron: Fix on-die ECC detection logic
mtd: rawnand: Expose _notsupp() helpers for raw page accessors
mtd: rawnand: micron: Get the actual number of bitflips
mtd: rawnand: micron: Avoid enabling/disabling ECC when it can't be disabled
mtd: rawnand: micron: Make ECC activation stateful
mtd: rawnand: orion: Avoid direct inclusion of asm headers
mtd: rawnand: orion: Handle cases where __LINUX_ARM_ARCH__ is not defined
mtd: rawnand: s3c2410: Error out when ->nrsets < 0 or ->sets == NULL
mtd: rawnand: Remove unused caller_is_module() definition
mtd: rawnand: jz4740: Include gpio/consumer.h instead of gpio.h
mtd: rawnand: sunxi: Remove gpio.h and of_gpio.h inclusions
mtd: rawnand: atmel: Stop including gpio.h
mtd: rawnand: au1550nd: Remove unneeded gpio.h inclusion

Chris Packham (6):
mtd: rawnand: marvell: Handle on-die ECC
mtd: rawnand: add manufacturer fixup for ONFI parameter page
mtd: rawnand: add defines for ONFI version bits
mtd: rawnand: micron: add fixup for ONFI revision
mtd: rawnand: micron: support 8/512 on-die ECC
mtd: rawnand: micron: allow forced on-die ECC

Colin Ian King (1):
mtd: rawnand: gpmi: remove redundant variable payload_virt

Daniel Mack (3):
mtd: rawnand: marvell: add suspend and resume hooks
mtd: rawnand: marvell: remove bogus comment in marvell_nfc_select_chip()
mtd: rawnand: marvell: set reg_clk to NULL if it can't be obtained

Fabio Estevam (2):
mtd: rawnand: gpmi: Switch to SPDX identifier
mtd: rawnand: mxc: Switch to SPDX identifier

Frieder Schrempf (1):
mtd: spinand: Add initial support for Winbond W25M02GV

Martin Blumenstingl (1):
mtd: rawnand: hynix: fix decoding the OOB size on H27UCG8T2BTR

Martin Kaiser (1):
mtd: rawnand: mxc: remove __init qualifier from mxcnd_probe_dt

Masahiro Yamada (4):
mtd: rawnand: denali_dt: use dev as a shorthand of &pdev->dev
dt-binding: mtd: denali_dt: document clock property
mtd: rawnand: denali_dt: add more clocks based on IP datasheet
mtd: rawnand: denali: optimize timing parameters for data interface

Miquel Raynal (48):
mtd: spinand: macronix: Add support for MX35LF2GE4AB
mtd: rawnand: docg4: fix the probe function error path
mtd: rawnand: fix indentation in Kconfig
mtd: rawnand: add default values for dynamic timings
mtd: rawnand: make subop helpers return unsigned values
mtd: rawnand: better name for the controller structure
mtd: rawnand: add hooks that may be called during nand_scan()
mtd: rawnand: davinci: convert driver to nand_scan()
mtd: rawnand: denali: convert to nand_scan()
mtd: rawnand: fsl_elbc: return meaningful values
mtd: rawnand: fsl_elbc: convert driver to nand_scan()
mtd: rawnand: fsl_ifc: convert driver to nand_scan()
mtd: rawnand: fsmc: convert driver to nand_scan()
mtd: rawnand: gpmi: convert driver to nand_scan()
mtd: rawnand: hisi504: convert driver to nand_scan()
mtd: rawnand: jz4780: convert driver to nand_scan()
mtd: rawnand: lpc32xx_slc: convert driver to nand_scan()
mtd: rawnand: marvell: convert driver to nand_scan()
mtd: rawnand: mtk: convert driver to nand_scan()
mtd: rawnand: mxc: convert driver to nand_scan()
mtd: rawnand: nandsim: convert driver to nand_scan()
mtd: rawnand: s3c2410: convert driver to nand_scan()
mtd: rawnand: sh_flctl: convert driver to nand_scan()
mtd: rawnand: sunxi: convert driver to nand_scan()
mtd: rawnand: tango: convert driver to nand_scan()
mtd: rawnand: txx9ndfmc: rename nand controller internal structure
mtd: rawnand: vf610: convert driver to nand_scan()
mtd: rawnand: sm_common: fix the probe function error path
mtd: rawnand: sm_common: convert driver to nand_scan_with_ids()
mtd: rawnand: qcom: convert driver to nand_scan()
mtd: rawnand: brcmnand: convert driver to nand_scan()
mtd: rawnand: cafe: convert driver to nand_scan()
mtd: rawnand: lpc32xx_mlc: convert driver to nand_scan()
mtd: rawnand: omap2: convert driver to nand_scan()
mtd: rawnand: atmel: clarify NAND addition/removal paths
mtd: rawnand: atmel: convert driver to nand_scan()
mtd: rawnand: do not execute nand_scan_ident() if maxchips is zero
mtd: rawnand: docg4: convert driver to nand_scan()
mtd: rawnand: jz4740: fix probe function error path
mtd: rawnand: jz4740: group nand_scan_{ident, tail} calls
mtd: rawnand: jz4740: convert driver to nand_scan()
mtd: rawnand: tegra: convert driver to nand_scan()
mtd: rawnand: txx9ndfmc: clarify ECC parameters assignation
mtd: rawnand: txx9ndfmc: convert driver to nand_scan()
mtd: rawnand: do not export nand_scan_[ident|tail]() anymore
mtd: rawnand: allocate model parameter dynamically
mtd: rawnand: allocate dynamically ONFI parameters during detection
MAINTAINERS: drop Wenyou Yang from Atmel NAND driver support

Peter Pan (2):
mtd: nand: Add core infrastructure to support SPI NANDs
mtd: spinand: Add initial support for Micron MT29F2G01ABAGD

Peter Rosin (1):
mtd: rawnand: atmel: add module param to avoid using dma

Rafał Miłecki (2):
mtd: rawnand: use mtd_device_register() where applicable
mtd: onenand: use mtd_device_register() where applicable

Stefan Agner (5):
mtd: rawnand: add Reed-Solomon error correction algorithm
mtd: rawnand: add an option to specify NAND chip as a boot device
dt-bindings: mtd: add tegra NAND controller binding
mtd: rawnand: add NVIDIA Tegra NAND Flash controller driver
mtd: rawnand: tegra: check bounds of die_nr properly

 .../devicetree/bindings/mtd/denali-nand.txt        |    5 +
 Documentation/devicetree/bindings/mtd/nand.txt     |    6 +-
 .../bindings/mtd/nvidia-tegra20-nand.txt           |   64 +
 .../devicetree/bindings/mtd/qcom_nandc.txt         |    7 +-
 Documentation/devicetree/bindings/mtd/spi-nand.txt |    5 +
 MAINTAINERS                                        |    8 +-
 arch/arm/mach-pxa/balloon3.c                       |    1 -
 arch/arm/mach-pxa/em-x270.c                        |    1 -
 arch/ia64/include/asm/io.h                         |   13 +-
 arch/mips/jz4740/board-qi_lb60.c                   |    3 +-
 arch/mips/txx9/generic/setup.c                     |    2 +-
 arch/mips/txx9/generic/setup_tx4938.c              |    2 +-
 arch/mips/txx9/generic/setup_tx4939.c              |    2 +-
 arch/sparc/include/asm/io_64.h                     |   19 +-
 drivers/bcma/Kconfig                               |    3 +-
 drivers/memory/Kconfig                             |    6 +-
 drivers/mtd/nand/Kconfig                           |    1 +
 drivers/mtd/nand/Makefile                          |    1 +
 drivers/mtd/nand/onenand/generic.c                 |    5 +-
 drivers/mtd/nand/onenand/samsung.c                 |    5 +-
 drivers/mtd/nand/raw/Kconfig                       |  152 ++-
 drivers/mtd/nand/raw/Makefile                      |    1 +
 drivers/mtd/nand/raw/atmel/nand-controller.c       |  175 ++-
 drivers/mtd/nand/raw/au1550nd.c                    |    1 -
 drivers/mtd/nand/raw/brcmnand/brcmnand.c           |   67 +-
 drivers/mtd/nand/raw/cafe_nand.c                   |  143 ++-
 drivers/mtd/nand/raw/cmx270_nand.c                 |    4 +-
 drivers/mtd/nand/raw/cs553x_nand.c                 |    3 +-
 drivers/mtd/nand/raw/davinci_nand.c                |  231 ++--
 drivers/mtd/nand/raw/denali.c                      |  216 ++--
 drivers/mtd/nand/raw/denali.h                      |    1 +
 drivers/mtd/nand/raw/denali_dt.c                   |   72 +-
 drivers/mtd/nand/raw/denali_pci.c                  |    1 +
 drivers/mtd/nand/raw/diskonchip.c                  |    4 +-
 drivers/mtd/nand/raw/docg4.c                       |   89 +-
 drivers/mtd/nand/raw/fsl_elbc_nand.c               |   25 +-
 drivers/mtd/nand/raw/fsl_ifc_nand.c                |   25 +-
 drivers/mtd/nand/raw/fsmc_nand.c                   |  183 +--
 drivers/mtd/nand/raw/gpmi-nand/gpmi-lib.c          |   15 +-
 drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c         |   76 +-
 drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.h         |   11 +-
 drivers/mtd/nand/raw/hisi504_nand.c                |   78 +-
 drivers/mtd/nand/raw/jz4740_nand.c                 |   51 +-
 drivers/mtd/nand/raw/jz4780_nand.c                 |   41 +-
 drivers/mtd/nand/raw/lpc32xx_mlc.c                 |   61 +-
 drivers/mtd/nand/raw/lpc32xx_slc.c                 |   77 +-
 drivers/mtd/nand/raw/marvell_nand.c                |  302 +++--
 drivers/mtd/nand/raw/mtk_nand.c                    |   79 +-
 drivers/mtd/nand/raw/mxc_nand.c                    |  157 ++-
 drivers/mtd/nand/raw/nand_base.c                   |  343 ++++--
 drivers/mtd/nand/raw/nand_bbt.c                    |   10 +-
 drivers/mtd/nand/raw/nand_hynix.c                  |   23 +
 drivers/mtd/nand/raw/nand_micron.c                 |  351 +++++-
 drivers/mtd/nand/raw/nand_timings.c                |   32 +-
 drivers/mtd/nand/raw/nandsim.c                     |   84 +-
 drivers/mtd/nand/raw/ndfc.c                        |    4 +-
 drivers/mtd/nand/raw/omap2.c                       |  533 +++++----
 drivers/mtd/nand/raw/orion_nand.c                  |    9 +-
 drivers/mtd/nand/raw/oxnas_nand.c                  |    4 +-
 drivers/mtd/nand/raw/plat_nand.c                   |    2 -
 drivers/mtd/nand/raw/qcom_nandc.c                  |  595 ++++++----
 drivers/mtd/nand/raw/s3c2410.c                     |   52 +-
 drivers/mtd/nand/raw/sh_flctl.c                    |   36 +-
 drivers/mtd/nand/raw/sharpsl.c                     |    5 +-
 drivers/mtd/nand/raw/sm_common.c                   |   39 +-
 drivers/mtd/nand/raw/sunxi_nand.c                  |   55 +-
 drivers/mtd/nand/raw/tango_nand.c                  |   44 +-
 drivers/mtd/nand/raw/tegra_nand.c                  | 1246 ++++++++++++++++++++
 drivers/mtd/nand/raw/txx9ndfmc.c                   |   42 +-
 drivers/mtd/nand/raw/vf610_nfc.c                   |  127 +-
 drivers/mtd/nand/spi/Kconfig                       |    7 +
 drivers/mtd/nand/spi/Makefile                      |    3 +
 drivers/mtd/nand/spi/core.c                        | 1155 ++++++++++++++++++
 drivers/mtd/nand/spi/macronix.c                    |  144 +++
 drivers/mtd/nand/spi/micron.c                      |  133 +++
 drivers/mtd/nand/spi/winbond.c                     |  141 +++
 include/linux/mtd/rawnand.h                        |  126 +-
 include/linux/mtd/spinand.h                        |  421 +++++++
 .../linux/platform_data/jz4740}/jz4740_nand.h      |    4 +-
 include/linux/platform_data/mtd-orion_nand.h       |    1 -
 .../linux/platform_data}/txx9/ndfmc.h              |    6 +-
 include/linux/spi/spi-mem.h                        |    4 +-
 82 files changed, 6200 insertions(+), 2081 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/mtd/nvidia-tegra20-nand.txt
 create mode 100644 Documentation/devicetree/bindings/mtd/spi-nand.txt
 create mode 100644 drivers/mtd/nand/raw/tegra_nand.c
 create mode 100644 drivers/mtd/nand/spi/Kconfig
 create mode 100644 drivers/mtd/nand/spi/Makefile
 create mode 100644 drivers/mtd/nand/spi/core.c
 create mode 100644 drivers/mtd/nand/spi/macronix.c
 create mode 100644 drivers/mtd/nand/spi/micron.c
 create mode 100644 drivers/mtd/nand/spi/winbond.c
 create mode 100644 include/linux/mtd/spinand.h
 rename {arch/mips/include/asm/mach-jz4740 => include/linux/platform_data/jz4740}/jz4740_nand.h (91%)
 rename {arch/mips/include/asm => include/linux/platform_data}/txx9/ndfmc.h (91%)

______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/