pinctrl: qcom: Add sdm660 pinctrl driver
Subsystems (6)
PATCH v2 1/1 pinctrl: qcom: Add sdm660 pinctrl driver
Add initial pinctrl driver to support pin configuration with pinctrl framework for sdm660.
Based off CAF implementation.
---
Changes from v1:
Adds gpio-ranges property to bindings
.../bindings/pinctrl/qcom,sdm660-pinctrl.txt | 202 +++ drivers/pinctrl/qcom/Kconfig | 10 + drivers/pinctrl/qcom/Makefile | 1 + drivers/pinctrl/qcom/pinctrl-sdm660.c | 1451 +++++++++++++++++ 4 files changed, 1663 insertions(+) create mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt create mode 100644 drivers/pinctrl/qcom/pinctrl-sdm660.c
Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt new file +202 -0
@@ -0,0 +1,202 @@ +Qualcomm Technologies, Inc. SDM660 TLMM block + +This binding describes the Top Level Mode Multiplexer block found in the +SDM660 platform. + +- compatible: + Usage: required + Value type: <string> + Definition: must be "qcom,sdm660-pinctrl" + +- reg: + Usage: required + Value type: <prop-encoded-array> + Definition: the base address and size of the TLMM register space. + +- interrupts: + Usage: required + Value type: <prop-encoded-array> + Definition: should specify the TLMM summary IRQ. + +- interrupt-controller: + Usage: required + Value type: <none> + Definition: identifies this node as an interrupt controller + +- #interrupt-cells: + Usage: required + Value type: <u32> + Definition: must be 2. Specifying the pin number and flags, as defined + in <dt-bindings/interrupt-controller/irq.h> + +- gpio-controller: + Usage: required + Value type: <none> + Definition: identifies this node as a gpio controller + +- gpio-ranges: + Usage: required + Value type: <prop-encoded-array> + Definition: Specifies the mapping between gpio controller and + pin-controller pins. + +- #gpio-cells: + Usage: required + Value type: <u32> + Definition: must be 2. Specifying the pin number and flags, as defined + in <dt-bindings/gpio/gpio.h> + +Please refer to ../gpio/gpio.txt and ../interrupt-controller/interrupts.txt for +a general description of GPIO and interrupt bindings. + +Please refer to pinctrl-bindings.txt in this directory for details of the +common pinctrl bindings used by client devices, including the meaning of the +phrase "pin configuration node". + +The pin configuration nodes act as a container for an arbitrary number of +subnodes. Each of these subnodes represents some desired configuration for a +pin, a group, or a list of pins or groups. This configuration can include the +mux function to select on those pin(s)/group(s), and various pin configuration +parameters, such as pull-up, drive strength, etc. + + +PIN CONFIGURATION NODES: + +The name of each subnode is not important; all subnodes should be enumerated +and processed purely based on their content. + +Each subnode only affects those parameters that are explicitly listed. In +other words, a subnode that lists a mux function but no pin configuration +parameters implies no information about any pin configuration parameters. +Similarly, a pin subnode that describes a pullup parameter implies no +information about e.g. the mux function. + + +The following generic properties as defined in pinctrl-bindings.txt are valid +to specify in a pin configuration subnode: + +- pins: + Usage: required + Value type: <string-array> + Definition: List of gpio pins affected by the properties specified in + this subnode. Valid pins are: + gpio0-gpio113, + Supports mux, bias and drive-strength + sdc1_clk, sdc1_cmd, sdc1_data sdc2_clk, sdc2_cmd, sdc2_data sdc1_rclk, + Supports bias and drive-strength + +- function: + Usage: required + Value type: <string> + Definition: Specify the alternative function to be configured for the + specified pins. Functions are only valid for gpio pins. + Valid values are: + + blsp_uart1, blsp_spi1, blsp_i2c1, blsp_uim1, atest_tsens, + bimc_dte1, dac_calib0, blsp_spi8, blsp_uart8, blsp_uim8, + qdss_cti_trig_out_b, bimc_dte0, dac_calib1, qdss_cti_trig_in_b, + dac_calib2, atest_tsens2, atest_usb1, blsp_spi10, blsp_uart10, + blsp_uim10, atest_bbrx1, atest_usb13, atest_bbrx0, atest_usb12, + mdp_vsync, edp_lcd, blsp_i2c10, atest_gpsadc1, atest_usb11, + atest_gpsadc0, edp_hot, atest_usb10, m_voc, dac_gpio, atest_char, + cam_mclk, pll_bypassnl, qdss_stm7, blsp_i2c8, qdss_tracedata_b, + pll_reset, qdss_stm6, qdss_stm5, qdss_stm4, atest_usb2, cci_i2c, + qdss_stm3, dac_calib3, atest_usb23, atest_char3, dac_calib4, + qdss_stm2, atest_usb22, atest_char2, qdss_stm1, dac_calib5, + atest_usb21, atest_char1, dbg_out, qdss_stm0, dac_calib6, + atest_usb20, atest_char0, dac_calib10, qdss_stm10, + qdss_cti_trig_in_a, cci_timer4, blsp_spi6, blsp_uart6, blsp_uim6, + blsp2_spi, qdss_stm9, qdss_cti_trig_out_a, dac_calib11, + qdss_stm8, cci_timer0, qdss_stm13, dac_calib7, cci_timer1, + qdss_stm12, dac_calib8, cci_timer2, blsp1_spi, qdss_stm11, + dac_calib9, cci_timer3, cci_async, dac_calib12, blsp_i2c6, + qdss_tracectl_a, dac_calib13, qdss_traceclk_a, dac_calib14, + dac_calib15, hdmi_rcv, dac_calib16, hdmi_cec, pwr_modem, + dac_calib17, hdmi_ddc, pwr_nav, dac_calib18, pwr_crypto, + dac_calib19, hdmi_hot, dac_calib20, dac_calib21, pci_e0, + dac_calib22, dac_calib23, dac_calib24, tsif1_sync, dac_calib25, + sd_write, tsif1_error, blsp_spi2, blsp_uart2, blsp_uim2, + qdss_cti, blsp_i2c2, blsp_spi3, blsp_uart3, blsp_uim3, blsp_i2c3, + uim3, blsp_spi9, blsp_uart9, blsp_uim9, blsp10_spi, blsp_i2c9, + blsp_spi7, blsp_uart7, blsp_uim7, qdss_tracedata_a, blsp_i2c7, + qua_mi2s, gcc_gp1_clk_a, ssc_irq, uim4, blsp_spi11, blsp_uart11, + blsp_uim11, gcc_gp2_clk_a, gcc_gp3_clk_a, blsp_i2c11, cri_trng0, + cri_trng1, cri_trng, qdss_stm18, pri_mi2s, qdss_stm17, blsp_spi4, + blsp_uart4, blsp_uim4, qdss_stm16, qdss_stm15, blsp_i2c4, + qdss_stm14, dac_calib26, spkr_i2s, audio_ref, lpass_slimbus, + isense_dbg, tsense_pwm1, tsense_pwm2, btfm_slimbus, ter_mi2s, + qdss_stm22, qdss_stm21, qdss_stm20, qdss_stm19, gcc_gp1_clk_b, + sec_mi2s, blsp_spi5, blsp_uart5, blsp_uim5, gcc_gp2_clk_b, + gcc_gp3_clk_b, blsp_i2c5, blsp_spi12, blsp_uart12, blsp_uim12, + qdss_stm25, qdss_stm31, blsp_i2c12, qdss_stm30, qdss_stm29, + tsif1_clk, qdss_stm28, tsif1_en, tsif1_data, sdc4_cmd, qdss_stm27, + qdss_traceclk_b, tsif2_error, sdc43, vfr_1, qdss_stm26, tsif2_clk, + sdc4_clk, qdss_stm24, tsif2_en, sdc42, qdss_stm23, qdss_tracectl_b, + sd_card, tsif2_data, sdc41, tsif2_sync, sdc40, mdp_vsync_p_b, + ldo_en, mdp_vsync_s_b, ldo_update, blsp11_uart_tx_b, blsp11_uart_rx_b, + blsp11_i2c_sda_b, prng_rosc, blsp11_i2c_scl_b, uim2, uim1, uim_batt, + pci_e2, pa_indicator, adsp_ext, ddr_bist, qdss_tracedata_11, + qdss_tracedata_12, modem_tsync, nav_dr, nav_pps, pci_e1, gsm_tx, + qspi_cs, ssbi2, ssbi1, mss_lte, qspi_clk, qspi0, qspi1, qspi2, qspi3, + gpio + +- bias-disable: + Usage: optional + Value type: <none> + Definition: The specified pins should be configued as no pull. + +- bias-pull-down: + Usage: optional + Value type: <none> + Definition: The specified pins should be configued as pull down. + +- bias-pull-up: + Usage: optional + Value type: <none> + Definition: The specified pins should be configued as pull up. + +- output-high: + Usage: optional + Value type: <none> + Definition: The specified pins are configured in output mode, driven + high. + Not valid for sdc pins. + +- output-low: + Usage: optional + Value type: <none> + Definition: The specified pins are configured in output mode, driven + low. + Not valid for sdc pins. + +- drive-strength: + Usage: optional + Value type: <u32> + Definition: Selects the drive strength for the specified pins, in mA. + Valid values are: 2, 4, 6, 8, 10, 12, 14 and 16 + +Example: + + tlmm: pinctrl@1010000 { + compatible = "qcom,sdm660-pinctrl"; + reg = <0x1010000 0x300000>; + interrupts = <0 208 0>; + gpio-controller; + gpio-ranges = <&tlmm 0 0 114>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + + uart_console_active: uart_console_active { + mux { + pins = "gpio4", "gpio5"; + function = "blsp_uart8"; + }; + + config { + pins = "gpio4", "gpio5"; + drive-strength = <2>; + bias-disable; + }; + }; + };
drivers/pinctrl/qcom/Kconfig +10 -0
@@ -147,6 +147,16 @@ config PINCTRL_QCOM_SSBI_PMIC which are using SSBI for communication with SoC. Example PMIC's devices are pm8058 and pm8921. +config PINCTRL_SDM660 + tristate "Qualcomm Technologies Inc SDM660 pin controller driver" + depends on GPIOLIB && OF + select PINCTRL_MSM + help + This is the pinctrl, pinmux, pinconf and gpiolib driver for the + Qualcomm Technologies Inc TLMM block found on the Qualcomm + Technologies Inc SDM660 platform. + + config PINCTRL_SDM845 tristate "Qualcomm Technologies Inc SDM845 pin controller driver" depends on GPIOLIB && OF
drivers/pinctrl/qcom/Makefile +1 -0
@@ -19,4 +19,5 @@ obj-$(CONFIG_PINCTRL_QCOM_SPMI_PMIC) += pinctrl-spmi-gpio.o obj-$(CONFIG_PINCTRL_QCOM_SPMI_PMIC) += pinctrl-spmi-mpp.o obj-$(CONFIG_PINCTRL_QCOM_SSBI_PMIC) += pinctrl-ssbi-gpio.o obj-$(CONFIG_PINCTRL_QCOM_SSBI_PMIC) += pinctrl-ssbi-mpp.o +obj-$(CONFIG_PINCTRL_SDM660) += pinctrl-sdm660.o obj-$(CONFIG_PINCTRL_SDM845) += pinctrl-sdm845.o
drivers/pinctrl/qcom/pinctrl-sdm660.c new file +1451 -0
1,451 lines not on this page · raw message
Signature · 1 line
2.18.0
Hi Craig,
Quoted 6 lines · Craig Tatlor
Add initial pinctrl driver to support pin configuration with pinctrl framework for sdm660.
Based off CAF implementation.Signed-off-by Craig Tatlor <[email protected]>---
The documentation portion should be a separate patch.
Please refer to Documentation/devicetree/bindings/submitting-patches.txt
It is easier for DT maintainers to review just the relevant part. The binding patches are also rebased to a separate tree as they are not Linux specific and can be re-used in other OSes
Best regards,
Michal
Quoted 1,709 lines
Changes from v1:
Adds gpio-ranges property to bindings.../bindings/pinctrl/qcom,sdm660-pinctrl.txt | 202 +++ drivers/pinctrl/qcom/Kconfig | 10 + drivers/pinctrl/qcom/Makefile | 1 + drivers/pinctrl/qcom/pinctrl-sdm660.c | 1451 +++++++++++++++++ 4 files changed, 1663 insertions(+)create mode 100644
Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txtcreate mode 100644drivers/pinctrl/qcom/pinctrl-sdm660.cDocumentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt new file +202
-0@@ -0,0 +1,202 @@ +Qualcomm Technologies, Inc. SDM660 TLMM block + +This binding describes the Top Level Mode Multiplexer block found in the +SDM660 platform. + +- compatible: + Usage: required + Value type: <string> + Definition: must be "qcom,sdm660-pinctrl" + +- reg: + Usage: required + Value type: <prop-encoded-array> + Definition: the base address and size of the TLMM register space. + +- interrupts: + Usage: required + Value type: <prop-encoded-array> + Definition: should specify the TLMM summary IRQ. + +- interrupt-controller: + Usage: required + Value type: <none> + Definition: identifies this node as an interrupt controller + +- #interrupt-cells: + Usage: required + Value type: <u32> + Definition: must be 2. Specifying the pin number and flags, as defined + in <dt-bindings/interrupt-controller/irq.h> + +- gpio-controller: + Usage: required + Value type: <none> + Definition: identifies this node as a gpio controller + +- gpio-ranges: + Usage: required + Value type: <prop-encoded-array> + Definition: Specifies the mapping between gpio controller and + pin-controller pins. + +- #gpio-cells: + Usage: required + Value type: <u32> + Definition: must be 2. Specifying the pin number and flags, as defined + in <dt-bindings/gpio/gpio.h> + +Please refer to ../gpio/gpio.txt and ../interrupt-controller/interrupts.txt for +a general description of GPIO and interrupt bindings. + +Please refer to pinctrl-bindings.txt in this directory for details of the +common pinctrl bindings used by client devices, including the meaning of the +phrase "pin configuration node". + +The pin configuration nodes act as a container for an arbitrary number of +subnodes. Each of these subnodes represents some desired configuration for a +pin, a group, or a list of pins or groups. This configuration can include the +mux function to select on those pin(s)/group(s), and various pin configuration +parameters, such as pull-up, drive strength, etc. + + +PIN CONFIGURATION NODES: + +The name of each subnode is not important; all subnodes should be enumerated +and processed purely based on their content. + +Each subnode only affects those parameters that are explicitly listed. In +other words, a subnode that lists a mux function but no pin configuration +parameters implies no information about any pin configuration parameters. +Similarly, a pin subnode that describes a pullup parameter implies no +information about e.g. the mux function. + + +The following generic properties as defined in pinctrl-bindings.txt are valid +to specify in a pin configuration subnode: + +- pins: + Usage: required + Value type: <string-array> + Definition: List of gpio pins affected by the properties specified in + this subnode. Valid pins are: + gpio0-gpio113, + Supports mux, bias and drive-strength + sdc1_clk, sdc1_cmd, sdc1_data sdc2_clk, sdc2_cmd, sdc2_data sdc1_rclk, + Supports bias and drive-strength + +- function: + Usage: required + Value type: <string> + Definition: Specify the alternative function to be configured for the + specified pins. Functions are only valid for gpio pins. + Valid values are: + + blsp_uart1, blsp_spi1, blsp_i2c1, blsp_uim1, atest_tsens, + bimc_dte1, dac_calib0, blsp_spi8, blsp_uart8, blsp_uim8, + qdss_cti_trig_out_b, bimc_dte0, dac_calib1, qdss_cti_trig_in_b, + dac_calib2, atest_tsens2, atest_usb1, blsp_spi10, blsp_uart10, + blsp_uim10, atest_bbrx1, atest_usb13, atest_bbrx0, atest_usb12, + mdp_vsync, edp_lcd, blsp_i2c10, atest_gpsadc1, atest_usb11, + atest_gpsadc0, edp_hot, atest_usb10, m_voc, dac_gpio, atest_char, + cam_mclk, pll_bypassnl, qdss_stm7, blsp_i2c8, qdss_tracedata_b, + pll_reset, qdss_stm6, qdss_stm5, qdss_stm4, atest_usb2, cci_i2c, + qdss_stm3, dac_calib3, atest_usb23, atest_char3, dac_calib4, + qdss_stm2, atest_usb22, atest_char2, qdss_stm1, dac_calib5, + atest_usb21, atest_char1, dbg_out, qdss_stm0, dac_calib6, + atest_usb20, atest_char0, dac_calib10, qdss_stm10, + qdss_cti_trig_in_a, cci_timer4, blsp_spi6, blsp_uart6, blsp_uim6, + blsp2_spi, qdss_stm9, qdss_cti_trig_out_a, dac_calib11, + qdss_stm8, cci_timer0, qdss_stm13, dac_calib7, cci_timer1, + qdss_stm12, dac_calib8, cci_timer2, blsp1_spi, qdss_stm11, + dac_calib9, cci_timer3, cci_async, dac_calib12, blsp_i2c6, + qdss_tracectl_a, dac_calib13, qdss_traceclk_a, dac_calib14, + dac_calib15, hdmi_rcv, dac_calib16, hdmi_cec, pwr_modem, + dac_calib17, hdmi_ddc, pwr_nav, dac_calib18, pwr_crypto, + dac_calib19, hdmi_hot, dac_calib20, dac_calib21, pci_e0, + dac_calib22, dac_calib23, dac_calib24, tsif1_sync, dac_calib25, + sd_write, tsif1_error, blsp_spi2, blsp_uart2, blsp_uim2, + qdss_cti, blsp_i2c2, blsp_spi3, blsp_uart3, blsp_uim3, blsp_i2c3, + uim3, blsp_spi9, blsp_uart9, blsp_uim9, blsp10_spi, blsp_i2c9, + blsp_spi7, blsp_uart7, blsp_uim7, qdss_tracedata_a, blsp_i2c7, + qua_mi2s, gcc_gp1_clk_a, ssc_irq, uim4, blsp_spi11, blsp_uart11, + blsp_uim11, gcc_gp2_clk_a, gcc_gp3_clk_a, blsp_i2c11, cri_trng0, + cri_trng1, cri_trng, qdss_stm18, pri_mi2s, qdss_stm17, blsp_spi4, + blsp_uart4, blsp_uim4, qdss_stm16, qdss_stm15, blsp_i2c4, + qdss_stm14, dac_calib26, spkr_i2s, audio_ref, lpass_slimbus, + isense_dbg, tsense_pwm1, tsense_pwm2, btfm_slimbus, ter_mi2s, + qdss_stm22, qdss_stm21, qdss_stm20, qdss_stm19, gcc_gp1_clk_b, + sec_mi2s, blsp_spi5, blsp_uart5, blsp_uim5, gcc_gp2_clk_b, + gcc_gp3_clk_b, blsp_i2c5, blsp_spi12, blsp_uart12, blsp_uim12, + qdss_stm25, qdss_stm31, blsp_i2c12, qdss_stm30, qdss_stm29, + tsif1_clk, qdss_stm28, tsif1_en, tsif1_data, sdc4_cmd, qdss_stm27, + qdss_traceclk_b, tsif2_error, sdc43, vfr_1, qdss_stm26, tsif2_clk, + sdc4_clk, qdss_stm24, tsif2_en, sdc42, qdss_stm23, qdss_tracectl_b, + sd_card, tsif2_data, sdc41, tsif2_sync, sdc40, mdp_vsync_p_b, + ldo_en, mdp_vsync_s_b, ldo_update, blsp11_uart_tx_b, blsp11_uart_rx_b, + blsp11_i2c_sda_b, prng_rosc, blsp11_i2c_scl_b, uim2, uim1, uim_batt, + pci_e2, pa_indicator, adsp_ext, ddr_bist, qdss_tracedata_11, + qdss_tracedata_12, modem_tsync, nav_dr, nav_pps, pci_e1, gsm_tx, + qspi_cs, ssbi2, ssbi1, mss_lte, qspi_clk, qspi0, qspi1, qspi2, qspi3, + gpio + +- bias-disable: + Usage: optional + Value type: <none> + Definition: The specified pins should be configued as no pull. + +- bias-pull-down: + Usage: optional + Value type: <none> + Definition: The specified pins should be configued as pull down. + +- bias-pull-up: + Usage: optional + Value type: <none> + Definition: The specified pins should be configued as pull up. + +- output-high: + Usage: optional + Value type: <none> + Definition: The specified pins are configured in output mode, driven + high. + Not valid for sdc pins. + +- output-low: + Usage: optional + Value type: <none> + Definition: The specified pins are configured in output mode, driven + low. + Not valid for sdc pins. + +- drive-strength: + Usage: optional + Value type: <u32> + Definition: Selects the drive strength for the specified pins, in mA. + Valid values are: 2, 4, 6, 8, 10, 12, 14 and 16 + +Example: + + tlmm: pinctrl@1010000 { + compatible = "qcom,sdm660-pinctrl"; + reg = <0x1010000 0x300000>; + interrupts = <0 208 0>; + gpio-controller; + gpio-ranges = <&tlmm 0 0 114>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + + uart_console_active: uart_console_active { + mux { + pins = "gpio4", "gpio5"; + function = "blsp_uart8"; + }; + + config { + pins = "gpio4", "gpio5"; + drive-strength = <2>; + bias-disable; + }; + }; + };drivers/pinctrl/qcom/Kconfig +10
-0@@ -147,6 +147,16 @@ config PINCTRL_QCOM_SSBI_PMIC which are using SSBI for communication with SoC. Example PMIC's devices are pm8058 and pm8921. +config PINCTRL_SDM660 + tristate "Qualcomm Technologies Inc SDM660 pin controller driver" + depends on GPIOLIB && OF + select PINCTRL_MSM + help + This is the pinctrl, pinmux, pinconf and gpiolib driver for the + Qualcomm Technologies Inc TLMM block found on the Qualcomm + Technologies Inc SDM660 platform. + + config PINCTRL_SDM845 tristate "Qualcomm Technologies Inc SDM845 pin controller driver" depends on GPIOLIB && OFdrivers/pinctrl/qcom/Makefile +1
-0@@ -19,4 +19,5 @@ obj-$(CONFIG_PINCTRL_QCOM_SPMI_PMIC) += pinctrl-spmi-gpio.o obj-$(CONFIG_PINCTRL_QCOM_SPMI_PMIC) += pinctrl-spmi-mpp.o obj-$(CONFIG_PINCTRL_QCOM_SSBI_PMIC) += pinctrl-ssbi-gpio.o obj-$(CONFIG_PINCTRL_QCOM_SSBI_PMIC) += pinctrl-ssbi-mpp.o +obj-$(CONFIG_PINCTRL_SDM660) += pinctrl-sdm660.o obj-$(CONFIG_PINCTRL_SDM845) += pinctrl-sdm845.odrivers/pinctrl/qcom/pinctrl-sdm660.c new file +1451
-0@@ -0,0 +1,1451 @@ +// SPDX-License-Identifier: GPL-2.0 +/* +* Copyright (c) 2016, The Linux Foundation. All rights reserved. +* Copyright (c) 2018, Craig Tatlor. +*/ + +#include <linux/module.h> +#include <linux/of.h> +#include <linux/platform_device.h> +#include <linux/pinctrl/pinctrl.h> + +#include "pinctrl-msm.h" + +#define NORTH 0x00900000 +#define CENTER 0x00500000 +#define SOUTH 0x00100000 +#define REG_SIZE 0x1000 + +#define FUNCTION (fname) \ + [msm_mux_##fname] = { \ + .name = #fname, \ + .groups = fname##_groups, \ + .ngroups = ARRAY_SIZE(fname##_groups), \ + } + + +#define PINGROUP(id, base, f1, f2, f3, f4, f5, f6, f7, f8, f9) \ + { \ + .name = "gpio" #id, \ + .pins = gpio##id##_pins, \ + .npins = (unsigned)ARRAY_SIZE(gpio##id##_pins), \ + .funcs = (int[]){ \ + msm_mux_gpio, /* gpio mode */ \ + msm_mux_##f1, \ + msm_mux_##f2, \ + msm_mux_##f3, \ + msm_mux_##f4, \ + msm_mux_##f5, \ + msm_mux_##f6, \ + msm_mux_##f7, \ + msm_mux_##f8, \ + msm_mux_##f9 \ + }, \ + .nfuncs = 10, \ + .ctl_reg = base + REG_SIZE * id, \ + .io_reg = base + 0x4 + REG_SIZE * id, \ + .intr_cfg_reg = base + 0x8 + REG_SIZE * id, \ + .intr_status_reg = base + 0xc + REG_SIZE * id, \ + .intr_target_reg = base + 0x8 + REG_SIZE * id, \ + .mux_bit = 2, \ + .pull_bit = 0, \ + .drv_bit = 6, \ + .oe_bit = 9, \ + .in_bit = 0, \ + .out_bit = 1, \ + .intr_enable_bit = 0, \ + .intr_status_bit = 0, \ + .intr_target_bit = 5, \ + .intr_target_kpss_val = 3, \ + .intr_raw_status_bit = 4, \ + .intr_polarity_bit = 1, \ + .intr_detection_bit = 2, \ + .intr_detection_width = 2, \ + } + +#define SDC_QDSD_PINGROUP (pg_name, ctl, pull, drv) \ + { \ + .name = #pg_name, \ + .pins = pg_name##_pins, \ + .npins = (unsigned)ARRAY_SIZE(pg_name##_pins), \ + .ctl_reg = ctl, \ + .io_reg = 0, \ + .intr_cfg_reg = 0, \ + .intr_status_reg = 0, \ + .intr_target_reg = 0, \ + .mux_bit = -1, \ + .pull_bit = pull, \ + .drv_bit = drv, \ + .oe_bit = -1, \ + .in_bit = -1, \ + .out_bit = -1, \ + .intr_enable_bit = -1, \ + .intr_status_bit = -1, \ + .intr_target_bit = -1, \ + .intr_raw_status_bit = -1, \ + .intr_polarity_bit = -1, \ + .intr_detection_bit = -1, \ + .intr_detection_width = -1, \ + } + +static const struct pinctrl_pin_desc sdm660_pins[] = { +PINCTRL_PIN (0 ,"GPIO_0" ), +PINCTRL_PIN (1 ,"GPIO_1" ), +PINCTRL_PIN (2 ,"GPIO_2" ), +PINCTRL_PIN (3 ,"GPIO_3" ), +PINCTRL_PIN (4 ,"GPIO_4" ), +PINCTRL_PIN (5 ,"GPIO_5" ), +PINCTRL_PIN (6 ,"GPIO_6" ), +PINCTRL_PIN (7 ,"GPIO_7" ), +PINCTRL_PIN (8 ,"GPIO_8" ), +PINCTRL_PIN (9 ,"GPIO_9" ), +PINCTRL_PIN (10 ,"GPIO_10" ), +PINCTRL_PIN (11 ,"GPIO_11" ), +PINCTRL_PIN (12 ,"GPIO_12" ), +PINCTRL_PIN (13 ,"GPIO_13" ), +PINCTRL_PIN (14 ,"GPIO_14" ), +PINCTRL_PIN (15 ,"GPIO_15" ), +PINCTRL_PIN (16 ,"GPIO_16" ), +PINCTRL_PIN (17 ,"GPIO_17" ), +PINCTRL_PIN (18 ,"GPIO_18" ), +PINCTRL_PIN (19 ,"GPIO_19" ), +PINCTRL_PIN (20 ,"GPIO_20" ), +PINCTRL_PIN (21 ,"GPIO_21" ), +PINCTRL_PIN (22 ,"GPIO_22" ), +PINCTRL_PIN (23 ,"GPIO_23" ), +PINCTRL_PIN (24 ,"GPIO_24" ), +PINCTRL_PIN (25 ,"GPIO_25" ), +PINCTRL_PIN (26 ,"GPIO_26" ), +PINCTRL_PIN (27 ,"GPIO_27" ), +PINCTRL_PIN (28 ,"GPIO_28" ), +PINCTRL_PIN (29 ,"GPIO_29" ), +PINCTRL_PIN (30 ,"GPIO_30" ), +PINCTRL_PIN (31 ,"GPIO_31" ), +PINCTRL_PIN (32 ,"GPIO_32" ), +PINCTRL_PIN (33 ,"GPIO_33" ), +PINCTRL_PIN (34 ,"GPIO_34" ), +PINCTRL_PIN (35 ,"GPIO_35" ), +PINCTRL_PIN (36 ,"GPIO_36" ), +PINCTRL_PIN (37 ,"GPIO_37" ), +PINCTRL_PIN (38 ,"GPIO_38" ), +PINCTRL_PIN (39 ,"GPIO_39" ), +PINCTRL_PIN (40 ,"GPIO_40" ), +PINCTRL_PIN (41 ,"GPIO_41" ), +PINCTRL_PIN (42 ,"GPIO_42" ), +PINCTRL_PIN (43 ,"GPIO_43" ), +PINCTRL_PIN (44 ,"GPIO_44" ), +PINCTRL_PIN (45 ,"GPIO_45" ), +PINCTRL_PIN (46 ,"GPIO_46" ), +PINCTRL_PIN (47 ,"GPIO_47" ), +PINCTRL_PIN (48 ,"GPIO_48" ), +PINCTRL_PIN (49 ,"GPIO_49" ), +PINCTRL_PIN (50 ,"GPIO_50" ), +PINCTRL_PIN (51 ,"GPIO_51" ), +PINCTRL_PIN (52 ,"GPIO_52" ), +PINCTRL_PIN (53 ,"GPIO_53" ), +PINCTRL_PIN (54 ,"GPIO_54" ), +PINCTRL_PIN (55 ,"GPIO_55" ), +PINCTRL_PIN (56 ,"GPIO_56" ), +PINCTRL_PIN (57 ,"GPIO_57" ), +PINCTRL_PIN (58 ,"GPIO_58" ), +PINCTRL_PIN (59 ,"GPIO_59" ), +PINCTRL_PIN (60 ,"GPIO_60" ), +PINCTRL_PIN (61 ,"GPIO_61" ), +PINCTRL_PIN (62 ,"GPIO_62" ), +PINCTRL_PIN (63 ,"GPIO_63" ), +PINCTRL_PIN (64 ,"GPIO_64" ), +PINCTRL_PIN (65 ,"GPIO_65" ), +PINCTRL_PIN (66 ,"GPIO_66" ), +PINCTRL_PIN (67 ,"GPIO_67" ), +PINCTRL_PIN (68 ,"GPIO_68" ), +PINCTRL_PIN (69 ,"GPIO_69" ), +PINCTRL_PIN (70 ,"GPIO_70" ), +PINCTRL_PIN (71 ,"GPIO_71" ), +PINCTRL_PIN (72 ,"GPIO_72" ), +PINCTRL_PIN (73 ,"GPIO_73" ), +PINCTRL_PIN (74 ,"GPIO_74" ), +PINCTRL_PIN (75 ,"GPIO_75" ), +PINCTRL_PIN (76 ,"GPIO_76" ), +PINCTRL_PIN (77 ,"GPIO_77" ), +PINCTRL_PIN (78 ,"GPIO_78" ), +PINCTRL_PIN (79 ,"GPIO_79" ), +PINCTRL_PIN (80 ,"GPIO_80" ), +PINCTRL_PIN (81 ,"GPIO_81" ), +PINCTRL_PIN (82 ,"GPIO_82" ), +PINCTRL_PIN (83 ,"GPIO_83" ), +PINCTRL_PIN (84 ,"GPIO_84" ), +PINCTRL_PIN (85 ,"GPIO_85" ), +PINCTRL_PIN (86 ,"GPIO_86" ), +PINCTRL_PIN (87 ,"GPIO_87" ), +PINCTRL_PIN (88 ,"GPIO_88" ), +PINCTRL_PIN (89 ,"GPIO_89" ), +PINCTRL_PIN (90 ,"GPIO_90" ), +PINCTRL_PIN (91 ,"GPIO_91" ), +PINCTRL_PIN (92 ,"GPIO_92" ), +PINCTRL_PIN (93 ,"GPIO_93" ), +PINCTRL_PIN (94 ,"GPIO_94" ), +PINCTRL_PIN (95 ,"GPIO_95" ), +PINCTRL_PIN (96 ,"GPIO_96" ), +PINCTRL_PIN (97 ,"GPIO_97" ), +PINCTRL_PIN (98 ,"GPIO_98" ), +PINCTRL_PIN (99 ,"GPIO_99" ), +PINCTRL_PIN (100 ,"GPIO_100" ), +PINCTRL_PIN (101 ,"GPIO_101" ), +PINCTRL_PIN (102 ,"GPIO_102" ), +PINCTRL_PIN (103 ,"GPIO_103" ), +PINCTRL_PIN (104 ,"GPIO_104" ), +PINCTRL_PIN (105 ,"GPIO_105" ), +PINCTRL_PIN (106 ,"GPIO_106" ), +PINCTRL_PIN (107 ,"GPIO_107" ), +PINCTRL_PIN (108 ,"GPIO_108" ), +PINCTRL_PIN (109 ,"GPIO_109" ), +PINCTRL_PIN (110 ,"GPIO_110" ), +PINCTRL_PIN (111 ,"GPIO_111" ), +PINCTRL_PIN (112 ,"GPIO_112" ), +PINCTRL_PIN (113 ,"GPIO_113" ), +PINCTRL_PIN (114 ,"SDC1_CLK" ), +PINCTRL_PIN (115 ,"SDC1_CMD" ), +PINCTRL_PIN (116 ,"SDC1_DATA" ), +PINCTRL_PIN (117 ,"SDC2_CLK" ), +PINCTRL_PIN (118 ,"SDC2_CMD" ), +PINCTRL_PIN (119 ,"SDC2_DATA" ), +PINCTRL_PIN (120 ,"SDC1_RCLK" ), +}; + +#define DECLARE_MSM_GPIO_PINS (pin) \ + static const unsigned int gpio##pin##_pins[] = { pin } +DECLARE_MSM_GPIO_PINS (0 ); +DECLARE_MSM_GPIO_PINS (1 ); +DECLARE_MSM_GPIO_PINS (2 ); +DECLARE_MSM_GPIO_PINS (3 ); +DECLARE_MSM_GPIO_PINS (4 ); +DECLARE_MSM_GPIO_PINS (5 ); +DECLARE_MSM_GPIO_PINS (6 ); +DECLARE_MSM_GPIO_PINS (7 ); +DECLARE_MSM_GPIO_PINS (8 ); +DECLARE_MSM_GPIO_PINS (9 ); +DECLARE_MSM_GPIO_PINS (10 ); +DECLARE_MSM_GPIO_PINS (11 ); +DECLARE_MSM_GPIO_PINS (12 ); +DECLARE_MSM_GPIO_PINS (13 ); +DECLARE_MSM_GPIO_PINS (14 ); +DECLARE_MSM_GPIO_PINS (15 ); +DECLARE_MSM_GPIO_PINS (16 ); +DECLARE_MSM_GPIO_PINS (17 ); +DECLARE_MSM_GPIO_PINS (18 ); +DECLARE_MSM_GPIO_PINS (19 ); +DECLARE_MSM_GPIO_PINS (20 ); +DECLARE_MSM_GPIO_PINS (21 ); +DECLARE_MSM_GPIO_PINS (22 ); +DECLARE_MSM_GPIO_PINS (23 ); +DECLARE_MSM_GPIO_PINS (24 ); +DECLARE_MSM_GPIO_PINS (25 ); +DECLARE_MSM_GPIO_PINS (26 ); +DECLARE_MSM_GPIO_PINS (27 ); +DECLARE_MSM_GPIO_PINS (28 ); +DECLARE_MSM_GPIO_PINS (29 ); +DECLARE_MSM_GPIO_PINS (30 ); +DECLARE_MSM_GPIO_PINS (31 ); +DECLARE_MSM_GPIO_PINS (32 ); +DECLARE_MSM_GPIO_PINS (33 ); +DECLARE_MSM_GPIO_PINS (34 ); +DECLARE_MSM_GPIO_PINS (35 ); +DECLARE_MSM_GPIO_PINS (36 ); +DECLARE_MSM_GPIO_PINS (37 ); +DECLARE_MSM_GPIO_PINS (38 ); +DECLARE_MSM_GPIO_PINS (39 ); +DECLARE_MSM_GPIO_PINS (40 ); +DECLARE_MSM_GPIO_PINS (41 ); +DECLARE_MSM_GPIO_PINS (42 ); +DECLARE_MSM_GPIO_PINS (43 ); +DECLARE_MSM_GPIO_PINS (44 ); +DECLARE_MSM_GPIO_PINS (45 ); +DECLARE_MSM_GPIO_PINS (46 ); +DECLARE_MSM_GPIO_PINS (47 ); +DECLARE_MSM_GPIO_PINS (48 ); +DECLARE_MSM_GPIO_PINS (49 ); +DECLARE_MSM_GPIO_PINS (50 ); +DECLARE_MSM_GPIO_PINS (51 ); +DECLARE_MSM_GPIO_PINS (52 ); +DECLARE_MSM_GPIO_PINS (53 ); +DECLARE_MSM_GPIO_PINS (54 ); +DECLARE_MSM_GPIO_PINS (55 ); +DECLARE_MSM_GPIO_PINS (56 ); +DECLARE_MSM_GPIO_PINS (57 ); +DECLARE_MSM_GPIO_PINS (58 ); +DECLARE_MSM_GPIO_PINS (59 ); +DECLARE_MSM_GPIO_PINS (60 ); +DECLARE_MSM_GPIO_PINS (61 ); +DECLARE_MSM_GPIO_PINS (62 ); +DECLARE_MSM_GPIO_PINS (63 ); +DECLARE_MSM_GPIO_PINS (64 ); +DECLARE_MSM_GPIO_PINS (65 ); +DECLARE_MSM_GPIO_PINS (66 ); +DECLARE_MSM_GPIO_PINS (67 ); +DECLARE_MSM_GPIO_PINS (68 ); +DECLARE_MSM_GPIO_PINS (69 ); +DECLARE_MSM_GPIO_PINS (70 ); +DECLARE_MSM_GPIO_PINS (71 ); +DECLARE_MSM_GPIO_PINS (72 ); +DECLARE_MSM_GPIO_PINS (73 ); +DECLARE_MSM_GPIO_PINS (74 ); +DECLARE_MSM_GPIO_PINS (75 ); +DECLARE_MSM_GPIO_PINS (76 ); +DECLARE_MSM_GPIO_PINS (77 ); +DECLARE_MSM_GPIO_PINS (78 ); +DECLARE_MSM_GPIO_PINS (79 ); +DECLARE_MSM_GPIO_PINS (80 ); +DECLARE_MSM_GPIO_PINS (81 ); +DECLARE_MSM_GPIO_PINS (82 ); +DECLARE_MSM_GPIO_PINS (83 ); +DECLARE_MSM_GPIO_PINS (84 ); +DECLARE_MSM_GPIO_PINS (85 ); +DECLARE_MSM_GPIO_PINS (86 ); +DECLARE_MSM_GPIO_PINS (87 ); +DECLARE_MSM_GPIO_PINS (88 ); +DECLARE_MSM_GPIO_PINS (89 ); +DECLARE_MSM_GPIO_PINS (90 ); +DECLARE_MSM_GPIO_PINS (91 ); +DECLARE_MSM_GPIO_PINS (92 ); +DECLARE_MSM_GPIO_PINS (93 ); +DECLARE_MSM_GPIO_PINS (94 ); +DECLARE_MSM_GPIO_PINS (95 ); +DECLARE_MSM_GPIO_PINS (96 ); +DECLARE_MSM_GPIO_PINS (97 ); +DECLARE_MSM_GPIO_PINS (98 ); +DECLARE_MSM_GPIO_PINS (99 ); +DECLARE_MSM_GPIO_PINS (100 ); +DECLARE_MSM_GPIO_PINS (101 ); +DECLARE_MSM_GPIO_PINS (102 ); +DECLARE_MSM_GPIO_PINS (103 ); +DECLARE_MSM_GPIO_PINS (104 ); +DECLARE_MSM_GPIO_PINS (105 ); +DECLARE_MSM_GPIO_PINS (106 ); +DECLARE_MSM_GPIO_PINS (107 ); +DECLARE_MSM_GPIO_PINS (108 ); +DECLARE_MSM_GPIO_PINS (109 ); +DECLARE_MSM_GPIO_PINS (110 ); +DECLARE_MSM_GPIO_PINS (111 ); +DECLARE_MSM_GPIO_PINS (112 ); +DECLARE_MSM_GPIO_PINS (113 ); + +static const unsigned int sdc1_clk_pins[] = {114 }; +static const unsigned int sdc1_cmd_pins[] = {115 }; +static const unsigned int sdc1_data_pins[] = {116 }; +static const unsigned int sdc2_clk_pins[] = {117 }; +static const unsigned int sdc2_cmd_pins[] = {118 }; +static const unsigned int sdc2_data_pins[] = {119 }; +static const unsigned int sdc1_rclk_pins[] = {120 }; + +enum sdm660_functions { + msm_mux_blsp_spi1, + msm_mux_gpio, + msm_mux_blsp_uim1, + msm_mux_tgu_ch0, + msm_mux_qdss_gpio4, + msm_mux_atest_gpsadc1, + msm_mux_blsp_uart1, + msm_mux_phase_flag14, + msm_mux_blsp_i2c2, + msm_mux_phase_flag31, + msm_mux_blsp_spi3, + msm_mux_blsp_spi3_cs1, + msm_mux_blsp_spi3_cs2, + msm_mux_wlan1_adc1, + msm_mux_atest_usb13, + msm_mux_tgu_ch1, + msm_mux_qdss_gpio5, + msm_mux_atest_gpsadc0, + msm_mux_blsp_i2c1, + msm_mux_ddr_bist, + msm_mux_atest_tsens2, + msm_mux_atest_usb1, + msm_mux_blsp_spi2, + msm_mux_blsp_uim2, + msm_mux_phase_flag3, + msm_mux_bimc_dte1, + msm_mux_wlan1_adc0, + msm_mux_atest_usb12, + msm_mux_bimc_dte0, + msm_mux_blsp_i2c3, + msm_mux_wlan2_adc1, + msm_mux_atest_usb11, + msm_mux_dbg_out, + msm_mux_wlan2_adc0, + msm_mux_atest_usb10, + msm_mux_blsp_spi4, + msm_mux_pri_mi2s, + msm_mux_phase_flag26, + msm_mux_qdss_cti0_a, + msm_mux_qdss_cti0_b, + msm_mux_qdss_cti1_a, + msm_mux_qdss_cti1_b, + msm_mux_pri_mi2s_ws, + msm_mux_phase_flag27, + msm_mux_blsp_i2c4, + msm_mux_phase_flag28, + msm_mux_blsp_uart5, + msm_mux_blsp_spi5, + msm_mux_blsp_uim5, + msm_mux_phase_flag5, + msm_mux_blsp_i2c5, + msm_mux_blsp_spi6, + msm_mux_blsp_uart2, + msm_mux_blsp_uim6, + msm_mux_phase_flag11, + msm_mux_vsense_data0, + msm_mux_blsp_i2c6, + msm_mux_phase_flag12, + msm_mux_vsense_data1, + msm_mux_phase_flag13, + msm_mux_vsense_mode, + msm_mux_blsp_spi7, + msm_mux_blsp_uart6_a, + msm_mux_blsp_uart6_b, + msm_mux_sec_mi2s, + msm_mux_sndwire_clk, + msm_mux_phase_flag17, + msm_mux_vsense_clkout, + msm_mux_sndwire_data, + msm_mux_phase_flag18, + msm_mux_blsp_i2c7, + msm_mux_phase_flag19, + msm_mux_vfr_1, + msm_mux_phase_flag20, + msm_mux_blsp_spi8_cs1, + msm_mux_blsp_spi8_cs2, + msm_mux_m_voc, + msm_mux_phase_flag21, + msm_mux_phase_flag22, + msm_mux_blsp_i2c8_a, + msm_mux_blsp_i2c8_b, + msm_mux_phase_flag23, + msm_mux_pwr_modem, + msm_mux_phase_flag24, + msm_mux_qdss_gpio, + msm_mux_cam_mclk, + msm_mux_pwr_nav, + msm_mux_qdss_gpio0, + msm_mux_qspi_data0, + msm_mux_pwr_crypto, + msm_mux_qdss_gpio1, + msm_mux_qspi_data1, + msm_mux_agera_pll, + msm_mux_qdss_gpio2, + msm_mux_qspi_data2, + msm_mux_jitter_bist, + msm_mux_qdss_gpio3, + msm_mux_qdss_gpio7, + msm_mux_mdss_vsync0, + msm_mux_mdss_vsync1, + msm_mux_mdss_vsync2, + msm_mux_mdss_vsync3, + msm_mux_qdss_gpio9, + msm_mux_atest_usb2, + msm_mux_cci_i2c, + msm_mux_pll_bypassnl, + msm_mux_atest_tsens, + msm_mux_atest_usb21, + msm_mux_pll_reset, + msm_mux_atest_usb23, + msm_mux_qdss_gpio6, + msm_mux_qspi_cs, + msm_mux_qdss_gpio10, + msm_mux_qdss_gpio11, + msm_mux_cci_async, + msm_mux_qdss_gpio12, + msm_mux_qdss_gpio13, + msm_mux_qspi_clk, + msm_mux_phase_flag30, + msm_mux_qdss_gpio14, + msm_mux_qspi_resetn, + msm_mux_phase_flag1, + msm_mux_qdss_gpio15, + msm_mux_phase_flag2, + msm_mux_phase_flag9, + msm_mux_qspi_data3, + msm_mux_phase_flag15, + msm_mux_qdss_gpio8, + msm_mux_phase_flag16, + msm_mux_phase_flag6, + msm_mux_phase_flag29, + msm_mux_phase_flag25, + msm_mux_phase_flag10, + msm_mux_atest_usb20, + msm_mux_gcc_gp1, + msm_mux_phase_flag4, + msm_mux_atest_usb22, + msm_mux_gcc_gp2, + msm_mux_atest_char, + msm_mux_mdp_vsync, + msm_mux_gcc_gp3, + msm_mux_atest_char3, + msm_mux_cri_trng0, + msm_mux_atest_char2, + msm_mux_cri_trng1, + msm_mux_atest_char1, + msm_mux_audio_ref, + msm_mux_cri_trng, + msm_mux_atest_char0, + msm_mux_blsp_spi8_a, + msm_mux_blsp_spi8_b, + msm_mux_sp_cmu, + msm_mux_nav_pps_a, + msm_mux_nav_pps_b, + msm_mux_nav_pps_c, + msm_mux_gps_tx_a, + msm_mux_gps_tx_b, + msm_mux_gps_tx_c, + msm_mux_adsp_ext, + msm_mux_ssc_irq, + msm_mux_isense_dbg, + msm_mux_phase_flag0, + msm_mux_phase_flag7, + msm_mux_phase_flag8, + msm_mux_tsense_pwm1, + msm_mux_tsense_pwm2, + msm_mux_mss_lte, + msm_mux_uim2_data, + msm_mux_uim2_clk, + msm_mux_uim2_reset, + msm_mux_uim2_present, + msm_mux_uim1_data, + msm_mux_uim1_clk, + msm_mux_uim1_reset, + msm_mux_uim1_present, + msm_mux_uim_batt, + msm_mux_pa_indicator, + msm_mux_ldo_en, + msm_mux_ldo_update, + msm_mux_qlink_request, + msm_mux_qlink_enable, + msm_mux_prng_rosc, + msm_mux__, +}; + +static const char *const gpio_groups[] = { +"gpio0" ,"gpio1" ,"gpio2" ,"gpio3" ,"gpio4" ,"gpio5" ,"gpio6" ,"gpio7" , +"gpio8" ,"gpio9" ,"gpio10" ,"gpio11" ,"gpio12" ,"gpio13" ,"gpio14" , +"gpio15" ,"gpio16" ,"gpio17" ,"gpio18" ,"gpio19" ,"gpio20" ,"gpio21" , +"gpio22" ,"gpio23" ,"gpio24" ,"gpio25" ,"gpio26" ,"gpio27" ,"gpio28" , +"gpio29" ,"gpio30" ,"gpio31" ,"gpio32" ,"gpio33" ,"gpio34" ,"gpio35" , +"gpio36" ,"gpio37" ,"gpio38" ,"gpio39" ,"gpio40" ,"gpio41" ,"gpio42" , +"gpio43" ,"gpio44" ,"gpio45" ,"gpio46" ,"gpio47" ,"gpio48" ,"gpio49" , +"gpio50" ,"gpio51" ,"gpio52" ,"gpio53" ,"gpio54" ,"gpio55" ,"gpio56" , +"gpio57" ,"gpio58" ,"gpio59" ,"gpio60" ,"gpio61" ,"gpio62" ,"gpio63" , +"gpio64" ,"gpio65" ,"gpio66" ,"gpio67" ,"gpio68" ,"gpio69" ,"gpio70" , +"gpio71" ,"gpio72" ,"gpio73" ,"gpio74" ,"gpio75" ,"gpio76" ,"gpio77" , +"gpio78" ,"gpio79" ,"gpio80" ,"gpio81" ,"gpio82" ,"gpio83" ,"gpio84" , +"gpio85" ,"gpio86" ,"gpio87" ,"gpio88" ,"gpio89" ,"gpio90" ,"gpio91" , +"gpio92" ,"gpio93" ,"gpio94" ,"gpio95" ,"gpio96" ,"gpio97" ,"gpio98" , +"gpio99" ,"gpio100" ,"gpio101" ,"gpio102" ,"gpio103" ,"gpio104" , +"gpio105" ,"gpio106" ,"gpio107" ,"gpio108" ,"gpio109" ,"gpio110" , +"gpio111" ,"gpio112" ,"gpio113" , +}; +static const char *const blsp_spi1_groups[] = { +"gpio0" ,"gpio1" ,"gpio2" ,"gpio3" ,"gpio46" , +}; +static const char *const blsp_uim1_groups[] = { +"gpio0" ,"gpio1" , +}; +static const char *const tgu_ch0_groups[] = { +"gpio0" , +}; +static const char *const qdss_gpio4_groups[] = { +"gpio0" ,"gpio36" , +}; +static const char *const atest_gpsadc1_groups[] = { +"gpio0" , +}; +static const char *const blsp_uart1_groups[] = { +"gpio0" ,"gpio1" ,"gpio2" ,"gpio3" , +}; +static const char *const phase_flag14_groups[] = { +"gpio5" , +}; +static const char *const blsp_i2c2_groups[] = { +"gpio6" ,"gpio7" , +}; +static const char *const phase_flag31_groups[] = { +"gpio6" , +}; +static const char *const blsp_spi3_groups[] = { +"gpio8" ,"gpio9" ,"gpio10" ,"gpio11" , +}; +static const char *const blsp_spi3_cs1_groups[] = { +"gpio30" , +}; +static const char *const blsp_spi3_cs2_groups[] = { +"gpio65" , +}; +static const char *const wlan1_adc1_groups[] = { +"gpio8" , +}; +static const char *const atest_usb13_groups[] = { +"gpio8" , +}; +static const char *const tgu_ch1_groups[] = { +"gpio1" , +}; +static const char *const qdss_gpio5_groups[] = { +"gpio1" ,"gpio37" , +}; +static const char *const atest_gpsadc0_groups[] = { +"gpio1" , +}; +static const char *const blsp_i2c1_groups[] = { +"gpio2" ,"gpio3" , +}; +static const char *const ddr_bist_groups[] = { +"gpio3" ,"gpio8" ,"gpio9" ,"gpio10" , +}; +static const char *const atest_tsens2_groups[] = { +"gpio3" , +}; +static const char *const atest_usb1_groups[] = { +"gpio3" , +}; +static const char *const blsp_spi2_groups[] = { +"gpio4" ,"gpio5" ,"gpio6" ,"gpio7" , +}; +static const char *const blsp_uim2_groups[] = { +"gpio4" ,"gpio5" , +}; +static const char *const phase_flag3_groups[] = { +"gpio4" , +}; +static const char *const bimc_dte1_groups[] = { +"gpio8" ,"gpio10" , +}; +static const char *const wlan1_adc0_groups[] = { +"gpio9" , +}; +static const char *const atest_usb12_groups[] = { +"gpio9" , +}; +static const char *const bimc_dte0_groups[] = { +"gpio9" ,"gpio11" , +}; +static const char *const blsp_i2c3_groups[] = { +"gpio10" ,"gpio11" , +}; +static const char *const wlan2_adc1_groups[] = { +"gpio10" , +}; +static const char *const atest_usb11_groups[] = { +"gpio10" , +}; +static const char *const dbg_out_groups[] = { +"gpio11" , +}; +static const char *const wlan2_adc0_groups[] = { +"gpio11" , +}; +static const char *const atest_usb10_groups[] = { +"gpio11" , +}; +static const char *const RCM_MARKER_groups[] = { +"gpio12" ,"gpio13" , +}; +static const char *const blsp_spi4_groups[] = { +"gpio12" ,"gpio13" ,"gpio14" ,"gpio15" , +}; +static const char *const pri_mi2s_groups[] = { +"gpio12" ,"gpio14" ,"gpio15" ,"gpio61" , +}; +static const char *const phase_flag26_groups[] = { +"gpio12" , +}; +static const char *const qdss_cti0_a_groups[] = { +"gpio49" ,"gpio50" , +}; +static const char *const qdss_cti0_b_groups[] = { +"gpio13" ,"gpio21" , +}; +static const char *const qdss_cti1_a_groups[] = { +"gpio53" ,"gpio55" , +}; +static const char *const qdss_cti1_b_groups[] = { +"gpio12" ,"gpio66" , +}; +static const char *const pri_mi2s_ws_groups[] = { +"gpio13" , +}; +static const char *const phase_flag27_groups[] = { +"gpio13" , +}; +static const char *const blsp_i2c4_groups[] = { +"gpio14" ,"gpio15" , +}; +static const char *const phase_flag28_groups[] = { +"gpio14" , +}; +static const char *const blsp_uart5_groups[] = { +"gpio16" ,"gpio17" ,"gpio18" ,"gpio19" , +}; +static const char *const blsp_spi5_groups[] = { +"gpio16" ,"gpio17" ,"gpio18" ,"gpio19" , +}; +static const char *const blsp_uim5_groups[] = { +"gpio16" ,"gpio17" , +}; +static const char *const phase_flag5_groups[] = { +"gpio17" , +}; +static const char *const blsp_i2c5_groups[] = { +"gpio18" ,"gpio19" , +}; +static const char *const blsp_spi6_groups[] = { +"gpio49" ,"gpio52" ,"gpio22" ,"gpio23" , +}; +static const char *const blsp_uart2_groups[] = { +"gpio4" ,"gpio5" ,"gpio6" ,"gpio7" , +}; +static const char *const blsp_uim6_groups[] = { +"gpio20" ,"gpio21" , +}; +static const char *const phase_flag11_groups[] = { +"gpio21" , +}; +static const char *const vsense_data0_groups[] = { +"gpio21" , +}; +static const char *const blsp_i2c6_groups[] = { +"gpio22" ,"gpio23" , +}; +static const char *const phase_flag12_groups[] = { +"gpio22" , +}; +static const char *const vsense_data1_groups[] = { +"gpio22" , +}; +static const char *const phase_flag13_groups[] = { +"gpio23" , +}; +static const char *const vsense_mode_groups[] = { +"gpio23" , +}; +static const char *const blsp_spi7_groups[] = { +"gpio24" ,"gpio25" ,"gpio26" ,"gpio27" , +}; +static const char *const blsp_uart6_a_groups[] = { +"gpio24" ,"gpio25" ,"gpio26" ,"gpio27" , +}; +static const char *const blsp_uart6_b_groups[] = { +"gpio28" ,"gpio29" ,"gpio30" ,"gpio31" , +}; +static const char *const sec_mi2s_groups[] = { +"gpio24" ,"gpio25" ,"gpio26" ,"gpio27" ,"gpio62" , +}; +static const char *const sndwire_clk_groups[] = { +"gpio24" , +}; +static const char *const phase_flag17_groups[] = { +"gpio24" , +}; +static const char *const vsense_clkout_groups[] = { +"gpio24" , +}; +static const char *const sndwire_data_groups[] = { +"gpio25" , +}; +static const char *const phase_flag18_groups[] = { +"gpio25" , +}; +static const char *const blsp_i2c7_groups[] = { +"gpio26" ,"gpio27" , +}; +static const char *const phase_flag19_groups[] = { +"gpio26" , +}; +static const char *const vfr_1_groups[] = { +"gpio27" , +}; +static const char *const phase_flag20_groups[] = { +"gpio27" , +}; +static const char *const NFC_INT_groups[] = { +"gpio28" , +}; +static const char *const blsp_spi8_a_groups[] = { +"gpio28" ,"gpio29" ,"gpio30" ,"gpio31" , +}; +static const char *const blsp_spi8_b_groups[] = { +"gpio40" ,"gpio41" ,"gpio44" ,"gpio52" , +}; +static const char *const m_voc_groups[] = { +"gpio28" , +}; +static const char *const phase_flag21_groups[] = { +"gpio28" , +}; +static const char *const phase_flag22_groups[] = { +"gpio29" , +}; +static const char *const blsp_i2c8_a_groups[] = { +"gpio30" ,"gpio31" , +}; +static const char *const blsp_i2c8_b_groups[] = { +"gpio44" ,"gpio52" , +}; +static const char *const phase_flag23_groups[] = { +"gpio30" , +}; +static const char *const NFC_ESE_groups[] = { +"gpio31" , +}; +static const char *const pwr_modem_groups[] = { +"gpio31" , +}; +static const char *const phase_flag24_groups[] = { +"gpio31" , +}; +static const char *const qdss_gpio_groups[] = { +"gpio31" ,"gpio52" ,"gpio68" ,"gpio69" , +}; +static const char *const cam_mclk_groups[] = { +"gpio32" ,"gpio33" ,"gpio34" ,"gpio35" , +}; +static const char *const pwr_nav_groups[] = { +"gpio32" , +}; +static const char *const qdss_gpio0_groups[] = { +"gpio32" ,"gpio67" , +}; +static const char *const qspi_data0_groups[] = { +"gpio33" , +}; +static const char *const pwr_crypto_groups[] = { +"gpio33" , +}; +static const char *const qdss_gpio1_groups[] = { +"gpio33" ,"gpio63" , +}; +static const char *const qspi_data1_groups[] = { +"gpio34" , +}; +static const char *const agera_pll_groups[] = { +"gpio34" ,"gpio36" , +}; +static const char *const qdss_gpio2_groups[] = { +"gpio34" ,"gpio64" , +}; +static const char *const qspi_data2_groups[] = { +"gpio35" , +}; +static const char *const jitter_bist_groups[] = { +"gpio35" , +}; +static const char *const qdss_gpio3_groups[] = { +"gpio35" ,"gpio56" , +}; +static const char *const qdss_gpio7_groups[] = { +"gpio39" ,"gpio71" , +}; +static const char *const mdss_vsync0_groups[] = { +"gpio42" , +}; +static const char *const mdss_vsync1_groups[] = { +"gpio42" , +}; +static const char *const mdss_vsync2_groups[] = { +"gpio42" , +}; +static const char *const mdss_vsync3_groups[] = { +"gpio42" , +}; +static const char *const qdss_gpio9_groups[] = { +"gpio42" ,"gpio76" , +}; +static const char *const atest_usb2_groups[] = { +"gpio35" , +}; +static const char *const cci_i2c_groups[] = { +"gpio36" ,"gpio37" ,"gpio38" ,"gpio39" , +}; +static const char *const pll_bypassnl_groups[] = { +"gpio36" , +}; +static const char *const atest_tsens_groups[] = { +"gpio36" , +}; +static const char *const atest_usb21_groups[] = { +"gpio36" , +}; +static const char *const pll_reset_groups[] = { +"gpio37" , +}; +static const char *const atest_usb23_groups[] = { +"gpio37" , +}; +static const char *const qdss_gpio6_groups[] = { +"gpio38" ,"gpio70" , +}; +static const char *const qspi_cs_groups[] = { +"gpio43" ,"gpio50" , +}; +static const char *const qdss_gpio10_groups[] = { +"gpio43" ,"gpio77" , +}; +static const char *const qdss_gpio11_groups[] = { +"gpio44" ,"gpio79" , +}; +static const char *const cci_async_groups[] = { +"gpio45" , +}; +static const char *const qdss_gpio12_groups[] = { +"gpio45" ,"gpio80" , +}; +static const char *const qdss_gpio13_groups[] = { +"gpio46" ,"gpio78" , +}; +static const char *const qspi_clk_groups[] = { +"gpio47" , +}; +static const char *const phase_flag30_groups[] = { +"gpio47" , +}; +static const char *const qdss_gpio14_groups[] = { +"gpio47" ,"gpio72" , +}; +static const char *const qspi_resetn_groups[] = { +"gpio48" , +}; +static const char *const phase_flag1_groups[] = { +"gpio48" , +}; +static const char *const qdss_gpio15_groups[] = { +"gpio48" ,"gpio73" , +}; +static const char *const phase_flag2_groups[] = { +"gpio49" , +}; +static const char *const phase_flag9_groups[] = { +"gpio50" , +}; +static const char *const qspi_data3_groups[] = { +"gpio51" , +}; +static const char *const phase_flag15_groups[] = { +"gpio51" , +}; +static const char *const qdss_gpio8_groups[] = { +"gpio51" ,"gpio75" , +}; +static const char *const phase_flag16_groups[] = { +"gpio52" , +}; +static const char *const phase_flag6_groups[] = { +"gpio53" , +}; +static const char *const phase_flag29_groups[] = { +"gpio54" , +}; +static const char *const phase_flag25_groups[] = { +"gpio55" , +}; +static const char *const phase_flag10_groups[] = { +"gpio56" , +}; +static const char *const atest_usb20_groups[] = { +"gpio56" , +}; +static const char *const gcc_gp1_groups[] = { +"gpio57" ,"gpio78" , +}; +static const char *const phase_flag4_groups[] = { +"gpio57" , +}; +static const char *const atest_usb22_groups[] = { +"gpio57" , +}; +static const char *const gcc_gp2_groups[] = { +"gpio58" ,"gpio81" , +}; +static const char *const atest_char_groups[] = { +"gpio58" , +}; +static const char *const mdp_vsync_groups[] = { +"gpio59" ,"gpio74" , +}; +static const char *const gcc_gp3_groups[] = { +"gpio59" ,"gpio82" , +}; +static const char *const atest_char3_groups[] = { +"gpio59" , +}; +static const char *const cri_trng0_groups[] = { +"gpio60" , +}; +static const char *const atest_char2_groups[] = { +"gpio60" , +}; +static const char *const cri_trng1_groups[] = { +"gpio61" , +}; +static const char *const atest_char1_groups[] = { +"gpio61" , +}; +static const char *const audio_ref_groups[] = { +"gpio62" , +}; +static const char *const cri_trng_groups[] = { +"gpio62" , +}; +static const char *const atest_char0_groups[] = { +"gpio62" , +}; +static const char *const blsp_spi8_cs1_groups[] = { +"gpio64" , +}; +static const char *const blsp_spi8_cs2_groups[] = { +"gpio76" , +}; +static const char *const sp_cmu_groups[] = { +"gpio64" , +}; +static const char *const nav_pps_a_groups[] = { +"gpio65" , +}; +static const char *const nav_pps_b_groups[] = { +"gpio98" , +}; +static const char *const nav_pps_c_groups[] = { +"gpio80" , +}; +static const char *const gps_tx_a_groups[] = { +"gpio65" , +}; +static const char *const gps_tx_b_groups[] = { +"gpio98" , +}; +static const char *const gps_tx_c_groups[] = { +"gpio80" , +}; +static const char *const adsp_ext_groups[] = { +"gpio65" , +}; +static const char *const ssc_irq_groups[] = { +"gpio67" ,"gpio68" ,"gpio69" ,"gpio70" ,"gpio71" ,"gpio72" ,"gpio74" , +"gpio75" ,"gpio76" , +}; +static const char *const isense_dbg_groups[] = { +"gpio68" , +}; +static const char *const phase_flag0_groups[] = { +"gpio68" , +}; +static const char *const phase_flag7_groups[] = { +"gpio69" , +}; +static const char *const phase_flag8_groups[] = { +"gpio70" , +}; +static const char *const tsense_pwm1_groups[] = { +"gpio71" , +}; +static const char *const tsense_pwm2_groups[] = { +"gpio71" , +}; +static const char *const mss_lte_groups[] = { +"gpio81" ,"gpio82" , +}; +static const char *const uim2_data_groups[] = { +"gpio83" , +}; +static const char *const uim2_clk_groups[] = { +"gpio84" , +}; +static const char *const uim2_reset_groups[] = { +"gpio85" , +}; +static const char *const uim2_present_groups[] = { +"gpio86" , +}; +static const char *const uim1_data_groups[] = { +"gpio87" , +}; +static const char *const uim1_clk_groups[] = { +"gpio88" , +}; +static const char *const uim1_reset_groups[] = { +"gpio89" , +}; +static const char *const uim1_present_groups[] = { +"gpio90" , +}; +static const char *const uim_batt_groups[] = { +"gpio91" , +}; +static const char *const pa_indicator_groups[] = { +"gpio92" , +}; +static const char *const ldo_en_groups[] = { +"gpio97" , +}; +static const char *const ldo_update_groups[] = { +"gpio98" , +}; +static const char *const qlink_request_groups[] = { +"gpio99" , +}; +static const char *const qlink_enable_groups[] = { +"gpio100" , +}; +static const char *const prng_rosc_groups[] = { +"gpio102" , +}; + +static const struct msm_function sdm660_functions[] = { +FUNCTION (blsp_spi1), +FUNCTION (gpio), +FUNCTION (blsp_uim1), +FUNCTION (tgu_ch0), +FUNCTION (qdss_gpio4), +FUNCTION (atest_gpsadc1), +FUNCTION (blsp_uart1), +FUNCTION (phase_flag14), +FUNCTION (blsp_i2c2), +FUNCTION (phase_flag31), +FUNCTION (blsp_spi3), +FUNCTION (blsp_spi3_cs1), +FUNCTION (blsp_spi3_cs2), +FUNCTION (wlan1_adc1), +FUNCTION (atest_usb13), +FUNCTION (tgu_ch1), +FUNCTION (qdss_gpio5), +FUNCTION (atest_gpsadc0), +FUNCTION (blsp_i2c1), +FUNCTION (ddr_bist), +FUNCTION (atest_tsens2), +FUNCTION (atest_usb1), +FUNCTION (blsp_spi2), +FUNCTION (blsp_uim2), +FUNCTION (phase_flag3), +FUNCTION (bimc_dte1), +FUNCTION (wlan1_adc0), +FUNCTION (atest_usb12), +FUNCTION (bimc_dte0), +FUNCTION (blsp_i2c3), +FUNCTION (wlan2_adc1), +FUNCTION (atest_usb11), +FUNCTION (dbg_out), +FUNCTION (wlan2_adc0), +FUNCTION (atest_usb10), +FUNCTION (blsp_spi4), +FUNCTION (pri_mi2s), +FUNCTION (phase_flag26), +FUNCTION (qdss_cti0_a), +FUNCTION (qdss_cti0_b), +FUNCTION (qdss_cti1_a), +FUNCTION (qdss_cti1_b), +FUNCTION (pri_mi2s_ws), +FUNCTION (phase_flag27), +FUNCTION (blsp_i2c4), +FUNCTION (phase_flag28), +FUNCTION (blsp_uart5), +FUNCTION (blsp_spi5), +FUNCTION (blsp_uim5), +FUNCTION (phase_flag5), +FUNCTION (blsp_i2c5), +FUNCTION (blsp_spi6), +FUNCTION (blsp_uart2), +FUNCTION (blsp_uim6), +FUNCTION (phase_flag11), +FUNCTION (vsense_data0), +FUNCTION (blsp_i2c6), +FUNCTION (phase_flag12), +FUNCTION (vsense_data1), +FUNCTION (phase_flag13), +FUNCTION (vsense_mode), +FUNCTION (blsp_spi7), +FUNCTION (blsp_uart6_a), +FUNCTION (blsp_uart6_b), +FUNCTION (sec_mi2s), +FUNCTION (sndwire_clk), +FUNCTION (phase_flag17), +FUNCTION (vsense_clkout), +FUNCTION (sndwire_data), +FUNCTION (phase_flag18), +FUNCTION (blsp_i2c7), +FUNCTION (phase_flag19), +FUNCTION (vfr_1), +FUNCTION (phase_flag20), +FUNCTION (blsp_spi8_cs1), +FUNCTION (blsp_spi8_cs2), +FUNCTION (m_voc), +FUNCTION (phase_flag21), +FUNCTION (phase_flag22), +FUNCTION (blsp_i2c8_a), +FUNCTION (blsp_i2c8_b), +FUNCTION (phase_flag23), +FUNCTION (pwr_modem), +FUNCTION (phase_flag24), +FUNCTION (qdss_gpio), +FUNCTION (cam_mclk), +FUNCTION (pwr_nav), +FUNCTION (qdss_gpio0), +FUNCTION (qspi_data0), +FUNCTION (pwr_crypto), +FUNCTION (qdss_gpio1), +FUNCTION (qspi_data1), +FUNCTION (agera_pll), +FUNCTION (qdss_gpio2), +FUNCTION (qspi_data2), +FUNCTION (jitter_bist), +FUNCTION (qdss_gpio3), +FUNCTION (qdss_gpio7), +FUNCTION (mdss_vsync0), +FUNCTION (mdss_vsync1), +FUNCTION (mdss_vsync2), +FUNCTION (mdss_vsync3), +FUNCTION (qdss_gpio9), +FUNCTION (atest_usb2), +FUNCTION (cci_i2c), +FUNCTION (pll_bypassnl), +FUNCTION (atest_tsens), +FUNCTION (atest_usb21), +FUNCTION (pll_reset), +FUNCTION (atest_usb23), +FUNCTION (qdss_gpio6), +FUNCTION (qspi_cs), +FUNCTION (qdss_gpio10), +FUNCTION (qdss_gpio11), +FUNCTION (cci_async), +FUNCTION (qdss_gpio12), +FUNCTION (qdss_gpio13), +FUNCTION (qspi_clk), +FUNCTION (phase_flag30), +FUNCTION (qdss_gpio14), +FUNCTION (qspi_resetn), +FUNCTION (phase_flag1), +FUNCTION (qdss_gpio15), +FUNCTION (phase_flag2), +FUNCTION (phase_flag9), +FUNCTION (qspi_data3), +FUNCTION (phase_flag15), +FUNCTION (qdss_gpio8), +FUNCTION (phase_flag16), +FUNCTION (phase_flag6), +FUNCTION (phase_flag29), +FUNCTION (phase_flag25), +FUNCTION (phase_flag10), +FUNCTION (atest_usb20), +FUNCTION (gcc_gp1), +FUNCTION (phase_flag4), +FUNCTION (atest_usb22), +FUNCTION (gcc_gp2), +FUNCTION (atest_char), +FUNCTION (mdp_vsync), +FUNCTION (gcc_gp3), +FUNCTION (atest_char3), +FUNCTION (cri_trng0), +FUNCTION (atest_char2), +FUNCTION (cri_trng1), +FUNCTION (atest_char1), +FUNCTION (audio_ref), +FUNCTION (cri_trng), +FUNCTION (atest_char0), +FUNCTION (blsp_spi8_a), +FUNCTION (blsp_spi8_b), +FUNCTION (sp_cmu), +FUNCTION (nav_pps_a), +FUNCTION (nav_pps_b), +FUNCTION (nav_pps_c), +FUNCTION (gps_tx_a), +FUNCTION (gps_tx_b), +FUNCTION (gps_tx_c), +FUNCTION (adsp_ext), +FUNCTION (ssc_irq), +FUNCTION (isense_dbg), +FUNCTION (phase_flag0), +FUNCTION (phase_flag7), +FUNCTION (phase_flag8), +FUNCTION (tsense_pwm1), +FUNCTION (tsense_pwm2), +FUNCTION (mss_lte), +FUNCTION (uim2_data), +FUNCTION (uim2_clk), +FUNCTION (uim2_reset), +FUNCTION (uim2_present), +FUNCTION (uim1_data), +FUNCTION (uim1_clk), +FUNCTION (uim1_reset), +FUNCTION (uim1_present), +FUNCTION (uim_batt), +FUNCTION (pa_indicator), +FUNCTION (ldo_en), +FUNCTION (ldo_update), +FUNCTION (qlink_request), +FUNCTION (qlink_enable), +FUNCTION (prng_rosc), +}; + +static const struct msm_pingroup sdm660_groups[] = { +PINGROUP (0 ,SOUTH , blsp_spi1, blsp_uart1, blsp_uim1, tgu_ch0, _, _, qdss_gpio4, atest_gpsadc1, _), +PINGROUP (1 ,SOUTH , blsp_spi1, blsp_uart1, blsp_uim1, tgu_ch1, _, _, qdss_gpio5, atest_gpsadc0, _), +PINGROUP (2 ,SOUTH , blsp_spi1, blsp_uart1, blsp_i2c1, _, _, _, _, _, _), +PINGROUP (3 ,SOUTH , blsp_spi1, blsp_uart1, blsp_i2c1, ddr_bist, _, _, atest_tsens2, atest_usb1, _), +PINGROUP (4 ,NORTH , blsp_spi2, blsp_uim2, blsp_uart2, phase_flag3, _, _, _, _, _), +PINGROUP (5 ,SOUTH , blsp_spi2, blsp_uim2, blsp_uart2, phase_flag14, _, _, _, _, _), +PINGROUP (6 ,SOUTH , blsp_spi2, blsp_i2c2, blsp_uart2, phase_flag31, _, _, _, _, _), +PINGROUP (7 ,SOUTH , blsp_spi2, blsp_i2c2, blsp_uart2, _, _, _, _, _, _), +PINGROUP (8 ,NORTH , blsp_spi3, ddr_bist, _, _, _, wlan1_adc1, atest_usb13, bimc_dte1, _), +PINGROUP (9 ,NORTH , blsp_spi3, ddr_bist, _, _, _, wlan1_adc0, atest_usb12, bimc_dte0, _), +PINGROUP (10 ,NORTH , blsp_spi3, blsp_i2c3, ddr_bist, _, _, wlan2_adc1, atest_usb11, bimc_dte1, _), +PINGROUP (11 ,NORTH , blsp_spi3, blsp_i2c3, _, dbg_out, wlan2_adc0, atest_usb10, bimc_dte0, _, _), +PINGROUP (12 ,NORTH , blsp_spi4, pri_mi2s, _, phase_flag26, qdss_cti1_b, _, _, _, _), +PINGROUP (13 ,NORTH , blsp_spi4, _, pri_mi2s_ws, _, _, phase_flag27, qdss_cti0_b, _, _), +PINGROUP (14 ,NORTH , blsp_spi4, blsp_i2c4, pri_mi2s, _, phase_flag28, _, _, _, _), +PINGROUP (15 ,NORTH , blsp_spi4, blsp_i2c4, pri_mi2s, _, _, _, _, _, _), +PINGROUP (16 ,CENTER , blsp_uart5, blsp_spi5, blsp_uim5, _, _, _, _, _, _), +PINGROUP (17 ,CENTER , blsp_uart5, blsp_spi5, blsp_uim5, _, phase_flag5, _, _, _, _), +PINGROUP (18 ,CENTER , blsp_uart5, blsp_spi5, blsp_i2c5, _, _, _, _, _, _), +PINGROUP (19 ,CENTER , blsp_uart5, blsp_spi5, blsp_i2c5, _, _, _, _, _, _), +PINGROUP (20 ,SOUTH , _, _, blsp_uim6, _, _, _, _, _, _), +PINGROUP (21 ,SOUTH , _, _, blsp_uim6, _, phase_flag11, qdss_cti0_b, vsense_data0, _, _), +PINGROUP (22 ,CENTER , blsp_spi6, _, blsp_i2c6, _, phase_flag12, vsense_data1, _, _, _), +PINGROUP (23 ,CENTER , blsp_spi6, _, blsp_i2c6, _, phase_flag13, vsense_mode, _, _, _), +PINGROUP (24 ,NORTH , blsp_spi7, blsp_uart6_a, sec_mi2s, sndwire_clk, _, _, phase_flag17, vsense_clkout, _), +PINGROUP (25 ,NORTH , blsp_spi7, blsp_uart6_a, sec_mi2s, sndwire_data, _, _, phase_flag18, _, _), +PINGROUP (26 ,NORTH , blsp_spi7, blsp_uart6_a, blsp_i2c7, sec_mi2s, _, phase_flag19, _, _, _), +PINGROUP (27 ,NORTH , blsp_spi7, blsp_uart6_a, blsp_i2c7, vfr_1, sec_mi2s, _, phase_flag20, _, _), +PINGROUP (28 ,CENTER , blsp_spi8_a, blsp_uart6_b, m_voc, _, phase_flag21, _, _, _, _), +PINGROUP (29 ,CENTER , blsp_spi8_a, blsp_uart6_b, _, _, phase_flag22, _, _, _, _), +PINGROUP (30 ,CENTER , blsp_spi8_a, blsp_uart6_b, blsp_i2c8_a, blsp_spi3_cs1, _, phase_flag23, _, _, _), +PINGROUP (31 ,CENTER , blsp_spi8_a, blsp_uart6_b, blsp_i2c8_a, pwr_modem, _, phase_flag24, qdss_gpio, _, _), +PINGROUP (32 ,SOUTH , cam_mclk, pwr_nav, _, _, qdss_gpio0, _, _, _, _), +PINGROUP (33 ,SOUTH , cam_mclk, qspi_data0, pwr_crypto, _, _, qdss_gpio1, _, _, _), +PINGROUP (34 ,SOUTH , cam_mclk, qspi_data1, agera_pll, _, _, qdss_gpio2, _, _, _), +PINGROUP (35 ,SOUTH , cam_mclk, qspi_data2, jitter_bist, _, _, qdss_gpio3, _, atest_usb2, _), +PINGROUP (36 ,SOUTH , cci_i2c, pll_bypassnl, agera_pll, _, _, qdss_gpio4, atest_tsens, atest_usb21, _), +PINGROUP (37 ,SOUTH , cci_i2c, pll_reset, _, _, qdss_gpio5, atest_usb23, _, _, _), +PINGROUP (38 ,SOUTH , cci_i2c, _, _, qdss_gpio6, _, _, _, _, _), +PINGROUP (39 ,SOUTH , cci_i2c, _, _, qdss_gpio7, _, _, _, _, _), +PINGROUP (40 ,SOUTH , _, _, blsp_spi8_b, _, _, _, _, _, _), +PINGROUP (41 ,SOUTH , _, _, blsp_spi8_b, _, _, _, _, _, _), +PINGROUP (42 ,SOUTH , mdss_vsync0, mdss_vsync1, mdss_vsync2, mdss_vsync3, _, _, qdss_gpio9, _, _), +PINGROUP (43 ,SOUTH , _, _, qspi_cs, _, _, qdss_gpio10, _, _, _), +PINGROUP (44 ,SOUTH , _, _, blsp_spi8_b, blsp_i2c8_b, _, _, qdss_gpio11, _, _), +PINGROUP (45 ,SOUTH , cci_async, _, _, qdss_gpio12, _, _, _, _, _), +PINGROUP (46 ,SOUTH , blsp_spi1, _, _, qdss_gpio13, _, _, _, _, _), +PINGROUP (47 ,SOUTH , qspi_clk, _, phase_flag30, qdss_gpio14, _, _, _, _, _), +PINGROUP (48 ,SOUTH , _, phase_flag1, qdss_gpio15, _, _, _, _, _, _), +PINGROUP (49 ,SOUTH , blsp_spi6, phase_flag2, qdss_cti0_a, _, _, _, _, _, _), +PINGROUP (50 ,SOUTH , qspi_cs, _, phase_flag9, qdss_cti0_a, _, _, _, _, _), +PINGROUP (51 ,SOUTH , qspi_data3, _, phase_flag15, qdss_gpio8, _, _, _, _, _), +PINGROUP (52 ,SOUTH , _, blsp_spi8_b, blsp_i2c8_b, blsp_spi6, phase_flag16, qdss_gpio, _, _, _), +PINGROUP (53 ,NORTH , _, phase_flag6, qdss_cti1_a, _, _, _, _, _, _), +PINGROUP (54 ,NORTH , _, _, phase_flag29, _, _, _, _, _, _), +PINGROUP (55 ,SOUTH , _, phase_flag25, qdss_cti1_a, _, _, _, _, _, _), +PINGROUP (56 ,SOUTH , _, phase_flag10, qdss_gpio3, _, atest_usb20, _, _, _, _), +PINGROUP (57 ,SOUTH , gcc_gp1, _, phase_flag4, atest_usb22, _, _, _, _, _), +PINGROUP (58 ,SOUTH , _, gcc_gp2, _, _, atest_char, _, _, _, _), +PINGROUP (59 ,NORTH , mdp_vsync, gcc_gp3, _, _, atest_char3, _, _, _, _), +PINGROUP (60 ,NORTH , cri_trng0, _, _, atest_char2, _, _, _, _, _), +PINGROUP (61 ,NORTH , pri_mi2s, cri_trng1, _, _, atest_char1, _, _, _, _), +PINGROUP (62 ,NORTH , sec_mi2s, audio_ref, _, cri_trng, _, _, atest_char0, _, _), +PINGROUP (63 ,NORTH , _, _, _, qdss_gpio1, _, _, _, _, _), +PINGROUP (64 ,SOUTH , blsp_spi8_cs1, sp_cmu, _, _, qdss_gpio2, _, _, _, _), +PINGROUP (65 ,SOUTH , _, nav_pps_a, nav_pps_a, gps_tx_a, blsp_spi3_cs2, adsp_ext, _, _, _), +PINGROUP (66 ,NORTH , _, _, qdss_cti1_b, _, _, _, _, _, _), +PINGROUP (67 ,NORTH , _, _, qdss_gpio0, _, _, _, _, _, _), +PINGROUP (68 ,NORTH , isense_dbg, _, phase_flag0, qdss_gpio, _, _, _, _, _), +PINGROUP (69 ,NORTH , _, phase_flag7, qdss_gpio, _, _, _, _, _, _), +PINGROUP (70 ,NORTH , _, phase_flag8, qdss_gpio6, _, _, _, _, _, _), +PINGROUP (71 ,NORTH , _, _, qdss_gpio7, tsense_pwm1, tsense_pwm2, _, _, _, _), +PINGROUP (72 ,NORTH , _, qdss_gpio14, _, _, _, _, _, _, _), +PINGROUP (73 ,NORTH , _, _, qdss_gpio15, _, _, _, _, _, _), +PINGROUP (74 ,NORTH , mdp_vsync, _, _, _, _, _, _, _, _), +PINGROUP (75 ,NORTH , _, _, qdss_gpio8, _, _, _, _, _, _), +PINGROUP (76 ,NORTH , blsp_spi8_cs2, _, _, _, qdss_gpio9, _, _, _, _), +PINGROUP (77 ,NORTH , _, _, qdss_gpio10, _, _, _, _, _, _), +PINGROUP (78 ,NORTH , gcc_gp1, _, qdss_gpio13, _, _, _, _, _, _), +PINGROUP (79 ,SOUTH , _, _, qdss_gpio11, _, _, _, _, _, _), +PINGROUP (80 ,SOUTH , nav_pps_b, nav_pps_b, gps_tx_c, _, _, qdss_gpio12, _, _, _), +PINGROUP (81 ,CENTER , mss_lte, gcc_gp2, _, _, _, _, _, _, _), +PINGROUP (82 ,CENTER , mss_lte, gcc_gp3, _, _, _, _, _, _, _), +PINGROUP (83 ,SOUTH , uim2_data, _, _, _, _, _, _, _, _), +PINGROUP (84 ,SOUTH , uim2_clk, _, _, _, _, _, _, _, _), +PINGROUP (85 ,SOUTH , uim2_reset, _, _, _, _, _, _, _, _), +PINGROUP (86 ,SOUTH , uim2_present, _, _, _, _, _, _, _, _), +PINGROUP (87 ,SOUTH , uim1_data, _, _, _, _, _, _, _, _), +PINGROUP (88 ,SOUTH , uim1_clk, _, _, _, _, _, _, _, _), +PINGROUP (89 ,SOUTH , uim1_reset, _, _, _, _, _, _, _, _), +PINGROUP (90 ,SOUTH , uim1_present, _, _, _, _, _, _, _, _), +PINGROUP (91 ,SOUTH , uim_batt, _, _, _, _, _, _, _, _), +PINGROUP (92 ,SOUTH , _, _, pa_indicator, _, _, _, _, _, _), +PINGROUP (93 ,SOUTH , _, _, _, _, _, _, _, _, _), +PINGROUP (94 ,SOUTH , _, _, _, _, _, _, _, _, _), +PINGROUP (95 ,SOUTH , _, _, _, _, _, _, _, _, _), +PINGROUP (96 ,SOUTH , _, _, _, _, _, _, _, _, _), +PINGROUP (97 ,SOUTH , _, ldo_en, _, _, _, _, _, _, _), +PINGROUP (98 ,SOUTH , _, nav_pps_c, nav_pps_c, gps_tx_b, ldo_update, _, _, _, _), +PINGROUP (99 ,SOUTH , qlink_request, _, _, _, _, _, _, _, _), +PINGROUP (100 ,SOUTH , qlink_enable, _, _, _, _, _, _, _, _), +PINGROUP (101 ,SOUTH , _, _, _, _, _, _, _, _, _), +PINGROUP (102 ,SOUTH , _, prng_rosc, _, _, _, _, _, _, _), +PINGROUP (103 ,SOUTH , _, _, _, _, _, _, _, _, _), +PINGROUP (104 ,SOUTH , _, _, _, _, _, _, _, _, _), +PINGROUP (105 ,SOUTH , _, _, _, _, _, _, _, _, _), +PINGROUP (106 ,SOUTH , _, _, _, _, _, _, _, _, _), +PINGROUP (107 ,SOUTH , _, _, _, _, _, _, _, _, _), +PINGROUP (108 ,SOUTH , _, _, _, _, _, _, _, _, _), +PINGROUP (109 ,SOUTH , _, _, _, _, _, _, _, _, _), +PINGROUP (110 ,SOUTH , _, _, _, _, _, _, _, _, _), +PINGROUP (111 ,SOUTH , _, _, _, _, _, _, _, _, _), +PINGROUP (112 ,SOUTH , _, _, _, _, _, _, _, _, _), +PINGROUP (113 ,SOUTH , _, _, _, _, _, _, _, _, _), +SDC_QDSD_PINGROUP (sdc1_clk,0x99a000 ,13 ,6 ), +SDC_QDSD_PINGROUP (sdc1_cmd,0x99a000 ,11 ,3 ), +SDC_QDSD_PINGROUP (sdc1_data,0x99a000 ,9 ,0 ), +SDC_QDSD_PINGROUP (sdc2_clk,0x99b000 ,14 ,6 ), +SDC_QDSD_PINGROUP (sdc2_cmd,0x99b000 ,11 ,3 ), +SDC_QDSD_PINGROUP (sdc2_data,0x99b000 ,9 ,0 ), +SDC_QDSD_PINGROUP (sdc1_rclk,0x99a000 ,15 ,0 ), +}; + +static const struct msm_pinctrl_soc_data sdm660_pinctrl = { + .pins = sdm660_pins, + .npins =ARRAY_SIZE (sdm660_pins), + .functions = sdm660_functions, + .nfunctions =ARRAY_SIZE (sdm660_functions), + .groups = sdm660_groups, + .ngroups =ARRAY_SIZE (sdm660_groups), + .ngpios =114 , +}; + +static int sdm660_pinctrl_probe (struct platform_device *pdev) +{ +return msm_pinctrl_probe (pdev, &sdm660_pinctrl); +} + +static const struct of_device_id sdm660_pinctrl_of_match[] = { + { .compatible ="qcom,sdm660-pinctrl" , }, + { }, +}; + +static struct platform_driver sdm660_pinctrl_driver = { + .driver = { + .name ="sdm660-pinctrl" , + .of_match_table = sdm660_pinctrl_of_match, + }, + .probe = sdm660_pinctrl_probe, + .remove = msm_pinctrl_remove, +}; + +static int __init sdm660_pinctrl_init (void ) +{ +return platform_driver_register (&sdm660_pinctrl_driver); +} +arch_initcall (sdm660_pinctrl_init); + +static void __exit sdm660_pinctrl_exit(void) +{ +platform_driver_unregister (&sdm660_pinctrl_driver); +} +module_exit (sdm660_pinctrl_exit); + +MODULE_DESCRIPTION ("QTI sdm660 pinctrl driver" ); +MODULE_LICENSE ("GPL v2" ); +MODULE_DEVICE_TABLE (of, sdm660_pinctrl_of_match);
I know, just did this because it is basically exactly same as other qcom pinctrl docs and they also only had one patch.
Quoted 1,047 lines · Michal Vokáč
Hi Craig,
Quoted 6 lines · Craig Tatlor
Add initial pinctrl driver to support pin configuration with pinctrl framework for sdm660.
Based off CAF implementation.Signed-off-by Craig Tatlor <[email protected]>---
The documentation portion should be a separate patch. Please refer to
Documentation/devicetree/bindings/submitting-patches.txtIt is easier for DT maintainers to review just the relevant part. The binding patches are also rebased to a separate tree as they are not Linux specific and can be re-used in other OSes
Best regards,
MichalQuoted 8 lines
Changes from v1:
Adds gpio-ranges property to bindings.../bindings/pinctrl/qcom,sdm660-pinctrl.txt | 202 +++ drivers/pinctrl/qcom/Kconfig | 10 + drivers/pinctrl/qcom/Makefile | 1 + drivers/pinctrl/qcom/pinctrl-sdm660.c | 1451+++++++++++++++++
Quoted 2 lines
4 files changed, 1663 insertions(+)create mode 100644
Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txtQuoted 3 lines
create mode 100644
drivers/pinctrl/qcom/pinctrl-sdm660.cdiff --git
a/Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txtb/Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txtQuoted 4 lines
new file mode 100644
index 000000000000..801960ad2112
---/dev/null
+++
b/Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txtDocumentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt line 3
Quoted 4 lines
Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt new file +3
-0@@ -0,0 +1,202 @@ +Qualcomm Technologies, Inc. SDM660 TLMM block + +This binding describes the Top Level Mode Multiplexer block found inthe
Quoted 16 lines
Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt new file +16
-0+SDM660 platform. + +- compatible: + Usage: required + Value type: <string> + Definition: must be "qcom,sdm660-pinctrl" + +- reg: + Usage: required + Value type: <prop-encoded-array> + Definition: the base address and size of the TLMM register space. + +- interrupts: + Usage: required + Value type: <prop-encoded-array> + Definition: should specify the TLMM summary IRQ.Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt
Quoted 10 lines
Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt new file +10
-0+ +- interrupt-controller: + Usage: required + Value type: <none> + Definition: identifies this node as an interrupt controller + +- #interrupt-cells: + Usage: required + Value type: <u32> + Definition: must be 2. Specifying the pin number and flags, asdefined
Quoted 7 lines
Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt new file +7
-0+ in <dt-bindings/interrupt-controller/irq.h> + +- gpio-controller: + Usage: required + Value type: <none> + Definition: identifies this node as a gpio controller +Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt
Quoted 10 lines
Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt new file +10
-0+- gpio-ranges: + Usage: required + Value type: <prop-encoded-array> + Definition: Specifies the mapping between gpio controller and + pin-controller pins. + +- #gpio-cells: + Usage: required + Value type: <u32> + Definition: must be 2. Specifying the pin number and flags, asdefined
Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt
Quoted 3 lines
Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt new file +3
-0+ in <dt-bindings/gpio/gpio.h> + +Please refer to ../gpio/gpio.txt and
../interrupt-controller/interrupts.txtforDocumentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt
Quoted 3 lines
Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt new file +3
-0+a general description of GPIO and interrupt bindings. + +Please refer to pinctrl-bindings.txt in this directory for detailsof the
Review line 53
Quoted 1 line
(quoted diff) +1
-0+common pinctrl bindings used by client devices, including themeaning of the
Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt
Quoted 3 lines
Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt new file +3
-0+phrase "pin configuration node". + +The pin configuration nodes act as a container for an arbitrarynumber of
Review line 57
Quoted 1 line
(quoted diff) +1
-0+subnodes. Each of these subnodes represents some desiredconfiguration for a
Review line 58
Quoted 1 line
(quoted diff) +1
-0+pin, a group, or a list of pins or groups. This configuration caninclude the
Review line 59
Quoted 1 line
(quoted diff) +1
-0+mux function to select on those pin(s)/group(s), and various pinconfiguration
Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt
Quoted 6 lines
Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt new file +6
-0+parameters, such as pull-up, drive strength, etc. + + +PIN CONFIGURATION NODES: + +The name of each subnode is not important; all subnodes should beenumerated
Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt
Quoted 3 lines
Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt new file +3
-0+and processed purely based on their content. + +Each subnode only affects those parameters that are explicitlylisted. In
Review line 69
Quoted 1 line
(quoted diff) +1
-0+other words, a subnode that lists a mux function but no pinconfiguration
Review line 70
Quoted 1 line
(quoted diff) +1
-0+parameters implies no information about any pin configurationparameters.
Review line 71
Quoted 1 line
(quoted diff) +1
-0+Similarly, a pin subnode that describes a pullup parameter impliesno
Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt
Quoted 4 lines
Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt new file +4
-0+information about e.g. the mux function. + + +The following generic properties as defined in pinctrl-bindings.txtare valid
Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt
Quoted 6 lines
Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt new file +6
-0+to specify in a pin configuration subnode: + +- pins: + Usage: required + Value type: <string-array> + Definition: List of gpio pins affected by the properties specifiedin
Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt
Quoted 4 lines
Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt new file +4
-0+ this subnode. Valid pins are: + gpio0-gpio113, + Supports mux, bias and drive-strength + sdc1_clk, sdc1_cmd, sdc1_data sdc2_clk, sdc2_cmd, sdc2_data
sdc1_rclk,Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt
Quoted 6 lines
Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt new file +6
-0+ Supports bias and drive-strength + +- function: + Usage: required + Value type: <string> + Definition: Specify the alternative function to be configured forthe
Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt
Quoted 6 lines
Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt new file +6
-0+ specified pins. Functions are only valid for gpio pins. + Valid values are: + + blsp_uart1, blsp_spi1, blsp_i2c1, blsp_uim1, atest_tsens, + bimc_dte1, dac_calib0, blsp_spi8, blsp_uart8, blsp_uim8, + qdss_cti_trig_out_b, bimc_dte0, dac_calib1,
qdss_cti_trig_in_b,Review line 99
Quoted 2 lines
(quoted diff) +2
-0+ dac_calib2, atest_tsens2, atest_usb1, blsp_spi10, blsp_uart10, + blsp_uim10, atest_bbrx1, atest_usb13, atest_bbrx0,
atest_usb12,Review line 101
Quoted 2 lines
(quoted diff) +2
-0+ mdp_vsync, edp_lcd, blsp_i2c10, atest_gpsadc1, atest_usb11, + atest_gpsadc0, edp_hot, atest_usb10, m_voc, dac_gpio,
atest_char,Review line 102
Quoted 1 line
(quoted diff) +1
-0+ cam_mclk, pll_bypassnl, qdss_stm7, blsp_i2c8,
qdss_tracedata_b,Review line 103
Quoted 1 line
(quoted diff) +1
-0+ pll_reset, qdss_stm6, qdss_stm5, qdss_stm4, atest_usb2,
cci_i2c,Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt
Quoted 5 lines
Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt new file +5
-0+ qdss_stm3, dac_calib3, atest_usb23, atest_char3, dac_calib4, + qdss_stm2, atest_usb22, atest_char2, qdss_stm1, dac_calib5, + atest_usb21, atest_char1, dbg_out, qdss_stm0, dac_calib6, + atest_usb20, atest_char0, dac_calib10, qdss_stm10, + qdss_cti_trig_in_a, cci_timer4, blsp_spi6, blsp_uart6,
blsp_uim6,Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt
Quoted 9 lines
Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt new file +9
-0+ blsp2_spi, qdss_stm9, qdss_cti_trig_out_a, dac_calib11, + qdss_stm8, cci_timer0, qdss_stm13, dac_calib7, cci_timer1, + qdss_stm12, dac_calib8, cci_timer2, blsp1_spi, qdss_stm11, + dac_calib9, cci_timer3, cci_async, dac_calib12, blsp_i2c6, + qdss_tracectl_a, dac_calib13, qdss_traceclk_a, dac_calib14, + dac_calib15, hdmi_rcv, dac_calib16, hdmi_cec, pwr_modem, + dac_calib17, hdmi_ddc, pwr_nav, dac_calib18, pwr_crypto, + dac_calib19, hdmi_hot, dac_calib20, dac_calib21, pci_e0, + dac_calib22, dac_calib23, dac_calib24, tsif1_sync,
dac_calib25,Review line 119
Quoted 2 lines
(quoted diff) +2
-0+ sd_write, tsif1_error, blsp_spi2, blsp_uart2, blsp_uim2, + qdss_cti, blsp_i2c2, blsp_spi3, blsp_uart3, blsp_uim3,
blsp_i2c3,Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt
Quoted 3 lines
Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt new file +3
-0+ uim3, blsp_spi9, blsp_uart9, blsp_uim9, blsp10_spi, blsp_i2c9, + blsp_spi7, blsp_uart7, blsp_uim7, qdss_tracedata_a, blsp_i2c7, + qua_mi2s, gcc_gp1_clk_a, ssc_irq, uim4, blsp_spi11,
blsp_uart11,Review line 123
Quoted 1 line
(quoted diff) +1
-0+ blsp_uim11, gcc_gp2_clk_a, gcc_gp3_clk_a, blsp_i2c11,
cri_trng0,Review line 124
Quoted 1 line
(quoted diff) +1
-0+ cri_trng1, cri_trng, qdss_stm18, pri_mi2s, qdss_stm17,
blsp_spi4,Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt
Quoted 8 lines
Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt new file +8
-0+ blsp_uart4, blsp_uim4, qdss_stm16, qdss_stm15, blsp_i2c4, + qdss_stm14, dac_calib26, spkr_i2s, audio_ref, lpass_slimbus, + isense_dbg, tsense_pwm1, tsense_pwm2, btfm_slimbus, ter_mi2s, + qdss_stm22, qdss_stm21, qdss_stm20, qdss_stm19, gcc_gp1_clk_b, + sec_mi2s, blsp_spi5, blsp_uart5, blsp_uim5, gcc_gp2_clk_b, + gcc_gp3_clk_b, blsp_i2c5, blsp_spi12, blsp_uart12, blsp_uim12, + qdss_stm25, qdss_stm31, blsp_i2c12, qdss_stm30, qdss_stm29, + tsif1_clk, qdss_stm28, tsif1_en, tsif1_data, sdc4_cmd,
qdss_stm27,Review line 133
Quoted 1 line
(quoted diff) +1
-0+ qdss_traceclk_b, tsif2_error, sdc43, vfr_1, qdss_stm26,
tsif2_clk,Review line 134
Quoted 1 line
(quoted diff) +1
-0+ sdc4_clk, qdss_stm24, tsif2_en, sdc42, qdss_stm23,
qdss_tracectl_b,Review line 136
Quoted 2 lines
(quoted diff) +2
-0+ sd_card, tsif2_data, sdc41, tsif2_sync, sdc40, mdp_vsync_p_b, + ldo_en, mdp_vsync_s_b, ldo_update, blsp11_uart_tx_b,
blsp11_uart_rx_b,Review line 137
Quoted 1 line
(quoted diff) +1
-0+ blsp11_i2c_sda_b, prng_rosc, blsp11_i2c_scl_b, uim2, uim1,
uim_batt,Review line 139
Quoted 2 lines
(quoted diff) +2
-0+ pci_e2, pa_indicator, adsp_ext, ddr_bist, qdss_tracedata_11, + qdss_tracedata_12, modem_tsync, nav_dr, nav_pps, pci_e1,
gsm_tx,Review line 140
Quoted 1 line
(quoted diff) +1
-0+ qspi_cs, ssbi2, ssbi1, mss_lte, qspi_clk, qspi0, qspi1, qspi2,qspi3,
Quoted 11 lines
Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt new file +11
-0+ gpio + +- bias-disable: + Usage: optional + Value type: <none> + Definition: The specified pins should be configued as no pull. + +- bias-pull-down: + Usage: optional + Value type: <none> + Definition: The specified pins should be configued as pull down.Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt
Quoted 10 lines
Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt new file +10
-0+ +- bias-pull-up: + Usage: optional + Value type: <none> + Definition: The specified pins should be configued as pull up. + +- output-high: + Usage: optional + Value type: <none> + Definition: The specified pins are configured in output mode,driven
Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt
Quoted 7 lines
Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt new file +7
-0+ high. + Not valid for sdc pins. + +- output-low: + Usage: optional + Value type: <none> + Definition: The specified pins are configured in output mode,driven
Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt
Quoted 7 lines
Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt new file +7
-0+ low. + Not valid for sdc pins. + +- drive-strength: + Usage: optional + Value type: <u32> + Definition: Selects the drive strength for the specified pins, inmA.
Review
Quoted 28 lines
Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt new file +27
-0+ Valid values are: 2, 4, 6, 8, 10, 12, 14 and 16 + +Example: + + tlmm: pinctrl@1010000 { + compatible = "qcom,sdm660-pinctrl"; + reg = <0x1010000 0x300000>; + interrupts = <0 208 0>; + gpio-controller; + gpio-ranges = <&tlmm 0 0 114>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + + uart_console_active: uart_console_active { + mux { + pins = "gpio4", "gpio5"; + function = "blsp_uart8"; + }; + + config { + pins = "gpio4", "gpio5"; + drive-strength = <2>; + bias-disable; + }; + }; + };(quoted diff) +0
-0b/drivers/pinctrl/qcom/Kconfig
drivers/pinctrl/qcom/Kconfig config PINCTRL_QCOM_SSBI_PMIC · line 147
Quoted 5 lines
index 195492033075..091beadb8a1c 100644
drivers/pinctrl/qcom/Kconfig +0
-0@@ -147,6 +147,16 @@ config PINCTRL_QCOM_SSBI_PMIC which are using SSBI for communication with SoC. ExamplePMIC's
drivers/pinctrl/qcom/Kconfig config PINCTRL_QCOM_SSBI_PMIC
Quoted 4 lines
drivers/pinctrl/qcom/Kconfig +2
-0devices are pm8058 and pm8921. +config PINCTRL_SDM660 + tristate "Qualcomm Technologies Inc SDM660 pin controllerdriver"
drivers/pinctrl/qcom/Kconfig config PINCTRL_QCOM_SSBI_PMIC
Quoted 4 lines
drivers/pinctrl/qcom/Kconfig +4
-0+ depends on GPIOLIB && OF + select PINCTRL_MSM + help + This is the pinctrl, pinmux, pinconf and gpiolib driver forthe
drivers/pinctrl/qcom/Kconfig config PINCTRL_QCOM_SSBI_PMIC
Quoted 6 lines
drivers/pinctrl/qcom/Kconfig +4
-0+ Qualcomm Technologies Inc TLMM block found on the Qualcomm + Technologies Inc SDM660 platform. + + config PINCTRL_SDM845 tristate "Qualcomm Technologies Inc SDM845 pin controllerdriver"
Review
Quoted 2 lines
drivers/pinctrl/qcom/Kconfig +0
-0depends on GPIOLIB && OF(quoted diff) +0
-0b/drivers/pinctrl/qcom/Makefile
drivers/pinctrl/qcom/Makefile obj-$(CONFIG_PINCTRL_QCOM_SPMI_PMIC) +=
Quoted 4 lines
index
0c6f3ddc296d..9b08808a2f1c100644drivers/pinctrl/qcom/Makefile +0
-0@@ -19,4 +19,5 @@ obj-$(CONFIG_PINCTRL_QCOM_SPMI_PMIC) +=pinctrl-spmi-gpio.o
Review
Quoted 6 lines
drivers/pinctrl/qcom/Makefile +1
-0obj-$(CONFIG_PINCTRL_QCOM_SPMI_PMIC) += pinctrl-spmi-mpp.o obj-$(CONFIG_PINCTRL_QCOM_SSBI_PMIC) += pinctrl-ssbi-gpio.o obj-$(CONFIG_PINCTRL_QCOM_SSBI_PMIC) += pinctrl-ssbi-mpp.o +obj-$(CONFIG_PINCTRL_SDM660) += pinctrl-sdm660.o obj-$(CONFIG_PINCTRL_SDM845) += pinctrl-sdm845.o(quoted diff) +0
-0
b/drivers/pinctrl/qcom/pinctrl-sdm660.cQuoted 522 lines
new file mode 100644
index 000000000000..ded56111f168drivers/pinctrl/qcom/pinctrl-sdm660.c new file +517
-0@@ -0,0 +1,1451 @@ +// SPDX-License-Identifier: GPL-2.0 +/* +* Copyright (c) 2016, The Linux Foundation. All rights reserved. +* Copyright (c) 2018, Craig Tatlor. +*/ + +#include <linux/module.h> +#include <linux/of.h> +#include <linux/platform_device.h> +#include <linux/pinctrl/pinctrl.h> + +#include "pinctrl-msm.h" + +#define NORTH 0x00900000 +#define CENTER 0x00500000 +#define SOUTH 0x00100000 +#define REG_SIZE 0x1000 + +#define FUNCTION (fname) \ + [msm_mux_##fname] = { \ + .name = #fname, \ + .groups = fname##_groups, \ + .ngroups = ARRAY_SIZE(fname##_groups), \ + } + + +#define PINGROUP(id, base, f1, f2, f3, f4, f5, f6, f7, f8, f9) \ + { \ + .name = "gpio" #id, \ + .pins = gpio##id##_pins, \ + .npins = (unsigned)ARRAY_SIZE(gpio##id##_pins), \ + .funcs = (int[]){ \ + msm_mux_gpio, /* gpio mode */ \ + msm_mux_##f1, \ + msm_mux_##f2, \ + msm_mux_##f3, \ + msm_mux_##f4, \ + msm_mux_##f5, \ + msm_mux_##f6, \ + msm_mux_##f7, \ + msm_mux_##f8, \ + msm_mux_##f9 \ + }, \ + .nfuncs = 10, \ + .ctl_reg = base + REG_SIZE * id, \ + .io_reg = base + 0x4 + REG_SIZE * id, \ + .intr_cfg_reg = base + 0x8 + REG_SIZE * id, \ + .intr_status_reg = base + 0xc + REG_SIZE * id, \ + .intr_target_reg = base + 0x8 + REG_SIZE * id, \ + .mux_bit = 2, \ + .pull_bit = 0, \ + .drv_bit = 6, \ + .oe_bit = 9, \ + .in_bit = 0, \ + .out_bit = 1, \ + .intr_enable_bit = 0, \ + .intr_status_bit = 0, \ + .intr_target_bit = 5, \ + .intr_target_kpss_val = 3, \ + .intr_raw_status_bit = 4, \ + .intr_polarity_bit = 1, \ + .intr_detection_bit = 2, \ + .intr_detection_width = 2, \ + } + +#define SDC_QDSD_PINGROUP (pg_name, ctl, pull, drv) \ + { \ + .name = #pg_name, \ + .pins = pg_name##_pins, \ + .npins = (unsigned)ARRAY_SIZE(pg_name##_pins), \ + .ctl_reg = ctl, \ + .io_reg = 0, \ + .intr_cfg_reg = 0, \ + .intr_status_reg = 0, \ + .intr_target_reg = 0, \ + .mux_bit = -1, \ + .pull_bit = pull, \ + .drv_bit = drv, \ + .oe_bit = -1, \ + .in_bit = -1, \ + .out_bit = -1, \ + .intr_enable_bit = -1, \ + .intr_status_bit = -1, \ + .intr_target_bit = -1, \ + .intr_raw_status_bit = -1, \ + .intr_polarity_bit = -1, \ + .intr_detection_bit = -1, \ + .intr_detection_width = -1, \ + } + +static const struct pinctrl_pin_desc sdm660_pins[] = { +PINCTRL_PIN (0 ,"GPIO_0" ), +PINCTRL_PIN (1 ,"GPIO_1" ), +PINCTRL_PIN (2 ,"GPIO_2" ), +PINCTRL_PIN (3 ,"GPIO_3" ), +PINCTRL_PIN (4 ,"GPIO_4" ), +PINCTRL_PIN (5 ,"GPIO_5" ), +PINCTRL_PIN (6 ,"GPIO_6" ), +PINCTRL_PIN (7 ,"GPIO_7" ), +PINCTRL_PIN (8 ,"GPIO_8" ), +PINCTRL_PIN (9 ,"GPIO_9" ), +PINCTRL_PIN (10 ,"GPIO_10" ), +PINCTRL_PIN (11 ,"GPIO_11" ), +PINCTRL_PIN (12 ,"GPIO_12" ), +PINCTRL_PIN (13 ,"GPIO_13" ), +PINCTRL_PIN (14 ,"GPIO_14" ), +PINCTRL_PIN (15 ,"GPIO_15" ), +PINCTRL_PIN (16 ,"GPIO_16" ), +PINCTRL_PIN (17 ,"GPIO_17" ), +PINCTRL_PIN (18 ,"GPIO_18" ), +PINCTRL_PIN (19 ,"GPIO_19" ), +PINCTRL_PIN (20 ,"GPIO_20" ), +PINCTRL_PIN (21 ,"GPIO_21" ), +PINCTRL_PIN (22 ,"GPIO_22" ), +PINCTRL_PIN (23 ,"GPIO_23" ), +PINCTRL_PIN (24 ,"GPIO_24" ), +PINCTRL_PIN (25 ,"GPIO_25" ), +PINCTRL_PIN (26 ,"GPIO_26" ), +PINCTRL_PIN (27 ,"GPIO_27" ), +PINCTRL_PIN (28 ,"GPIO_28" ), +PINCTRL_PIN (29 ,"GPIO_29" ), +PINCTRL_PIN (30 ,"GPIO_30" ), +PINCTRL_PIN (31 ,"GPIO_31" ), +PINCTRL_PIN (32 ,"GPIO_32" ), +PINCTRL_PIN (33 ,"GPIO_33" ), +PINCTRL_PIN (34 ,"GPIO_34" ), +PINCTRL_PIN (35 ,"GPIO_35" ), +PINCTRL_PIN (36 ,"GPIO_36" ), +PINCTRL_PIN (37 ,"GPIO_37" ), +PINCTRL_PIN (38 ,"GPIO_38" ), +PINCTRL_PIN (39 ,"GPIO_39" ), +PINCTRL_PIN (40 ,"GPIO_40" ), +PINCTRL_PIN (41 ,"GPIO_41" ), +PINCTRL_PIN (42 ,"GPIO_42" ), +PINCTRL_PIN (43 ,"GPIO_43" ), +PINCTRL_PIN (44 ,"GPIO_44" ), +PINCTRL_PIN (45 ,"GPIO_45" ), +PINCTRL_PIN (46 ,"GPIO_46" ), +PINCTRL_PIN (47 ,"GPIO_47" ), +PINCTRL_PIN (48 ,"GPIO_48" ), +PINCTRL_PIN (49 ,"GPIO_49" ), +PINCTRL_PIN (50 ,"GPIO_50" ), +PINCTRL_PIN (51 ,"GPIO_51" ), +PINCTRL_PIN (52 ,"GPIO_52" ), +PINCTRL_PIN (53 ,"GPIO_53" ), +PINCTRL_PIN (54 ,"GPIO_54" ), +PINCTRL_PIN (55 ,"GPIO_55" ), +PINCTRL_PIN (56 ,"GPIO_56" ), +PINCTRL_PIN (57 ,"GPIO_57" ), +PINCTRL_PIN (58 ,"GPIO_58" ), +PINCTRL_PIN (59 ,"GPIO_59" ), +PINCTRL_PIN (60 ,"GPIO_60" ), +PINCTRL_PIN (61 ,"GPIO_61" ), +PINCTRL_PIN (62 ,"GPIO_62" ), +PINCTRL_PIN (63 ,"GPIO_63" ), +PINCTRL_PIN (64 ,"GPIO_64" ), +PINCTRL_PIN (65 ,"GPIO_65" ), +PINCTRL_PIN (66 ,"GPIO_66" ), +PINCTRL_PIN (67 ,"GPIO_67" ), +PINCTRL_PIN (68 ,"GPIO_68" ), +PINCTRL_PIN (69 ,"GPIO_69" ), +PINCTRL_PIN (70 ,"GPIO_70" ), +PINCTRL_PIN (71 ,"GPIO_71" ), +PINCTRL_PIN (72 ,"GPIO_72" ), +PINCTRL_PIN (73 ,"GPIO_73" ), +PINCTRL_PIN (74 ,"GPIO_74" ), +PINCTRL_PIN (75 ,"GPIO_75" ), +PINCTRL_PIN (76 ,"GPIO_76" ), +PINCTRL_PIN (77 ,"GPIO_77" ), +PINCTRL_PIN (78 ,"GPIO_78" ), +PINCTRL_PIN (79 ,"GPIO_79" ), +PINCTRL_PIN (80 ,"GPIO_80" ), +PINCTRL_PIN (81 ,"GPIO_81" ), +PINCTRL_PIN (82 ,"GPIO_82" ), +PINCTRL_PIN (83 ,"GPIO_83" ), +PINCTRL_PIN (84 ,"GPIO_84" ), +PINCTRL_PIN (85 ,"GPIO_85" ), +PINCTRL_PIN (86 ,"GPIO_86" ), +PINCTRL_PIN (87 ,"GPIO_87" ), +PINCTRL_PIN (88 ,"GPIO_88" ), +PINCTRL_PIN (89 ,"GPIO_89" ), +PINCTRL_PIN (90 ,"GPIO_90" ), +PINCTRL_PIN (91 ,"GPIO_91" ), +PINCTRL_PIN (92 ,"GPIO_92" ), +PINCTRL_PIN (93 ,"GPIO_93" ), +PINCTRL_PIN (94 ,"GPIO_94" ), +PINCTRL_PIN (95 ,"GPIO_95" ), +PINCTRL_PIN (96 ,"GPIO_96" ), +PINCTRL_PIN (97 ,"GPIO_97" ), +PINCTRL_PIN (98 ,"GPIO_98" ), +PINCTRL_PIN (99 ,"GPIO_99" ), +PINCTRL_PIN (100 ,"GPIO_100" ), +PINCTRL_PIN (101 ,"GPIO_101" ), +PINCTRL_PIN (102 ,"GPIO_102" ), +PINCTRL_PIN (103 ,"GPIO_103" ), +PINCTRL_PIN (104 ,"GPIO_104" ), +PINCTRL_PIN (105 ,"GPIO_105" ), +PINCTRL_PIN (106 ,"GPIO_106" ), +PINCTRL_PIN (107 ,"GPIO_107" ), +PINCTRL_PIN (108 ,"GPIO_108" ), +PINCTRL_PIN (109 ,"GPIO_109" ), +PINCTRL_PIN (110 ,"GPIO_110" ), +PINCTRL_PIN (111 ,"GPIO_111" ), +PINCTRL_PIN (112 ,"GPIO_112" ), +PINCTRL_PIN (113 ,"GPIO_113" ), +PINCTRL_PIN (114 ,"SDC1_CLK" ), +PINCTRL_PIN (115 ,"SDC1_CMD" ), +PINCTRL_PIN (116 ,"SDC1_DATA" ), +PINCTRL_PIN (117 ,"SDC2_CLK" ), +PINCTRL_PIN (118 ,"SDC2_CMD" ), +PINCTRL_PIN (119 ,"SDC2_DATA" ), +PINCTRL_PIN (120 ,"SDC1_RCLK" ), +}; + +#define DECLARE_MSM_GPIO_PINS (pin) \ + static const unsigned int gpio##pin##_pins[] = { pin } +DECLARE_MSM_GPIO_PINS (0 ); +DECLARE_MSM_GPIO_PINS (1 ); +DECLARE_MSM_GPIO_PINS (2 ); +DECLARE_MSM_GPIO_PINS (3 ); +DECLARE_MSM_GPIO_PINS (4 ); +DECLARE_MSM_GPIO_PINS (5 ); +DECLARE_MSM_GPIO_PINS (6 ); +DECLARE_MSM_GPIO_PINS (7 ); +DECLARE_MSM_GPIO_PINS (8 ); +DECLARE_MSM_GPIO_PINS (9 ); +DECLARE_MSM_GPIO_PINS (10 ); +DECLARE_MSM_GPIO_PINS (11 ); +DECLARE_MSM_GPIO_PINS (12 ); +DECLARE_MSM_GPIO_PINS (13 ); +DECLARE_MSM_GPIO_PINS (14 ); +DECLARE_MSM_GPIO_PINS (15 ); +DECLARE_MSM_GPIO_PINS (16 ); +DECLARE_MSM_GPIO_PINS (17 ); +DECLARE_MSM_GPIO_PINS (18 ); +DECLARE_MSM_GPIO_PINS (19 ); +DECLARE_MSM_GPIO_PINS (20 ); +DECLARE_MSM_GPIO_PINS (21 ); +DECLARE_MSM_GPIO_PINS (22 ); +DECLARE_MSM_GPIO_PINS (23 ); +DECLARE_MSM_GPIO_PINS (24 ); +DECLARE_MSM_GPIO_PINS (25 ); +DECLARE_MSM_GPIO_PINS (26 ); +DECLARE_MSM_GPIO_PINS (27 ); +DECLARE_MSM_GPIO_PINS (28 ); +DECLARE_MSM_GPIO_PINS (29 ); +DECLARE_MSM_GPIO_PINS (30 ); +DECLARE_MSM_GPIO_PINS (31 ); +DECLARE_MSM_GPIO_PINS (32 ); +DECLARE_MSM_GPIO_PINS (33 ); +DECLARE_MSM_GPIO_PINS (34 ); +DECLARE_MSM_GPIO_PINS (35 ); +DECLARE_MSM_GPIO_PINS (36 ); +DECLARE_MSM_GPIO_PINS (37 ); +DECLARE_MSM_GPIO_PINS (38 ); +DECLARE_MSM_GPIO_PINS (39 ); +DECLARE_MSM_GPIO_PINS (40 ); +DECLARE_MSM_GPIO_PINS (41 ); +DECLARE_MSM_GPIO_PINS (42 ); +DECLARE_MSM_GPIO_PINS (43 ); +DECLARE_MSM_GPIO_PINS (44 ); +DECLARE_MSM_GPIO_PINS (45 ); +DECLARE_MSM_GPIO_PINS (46 ); +DECLARE_MSM_GPIO_PINS (47 ); +DECLARE_MSM_GPIO_PINS (48 ); +DECLARE_MSM_GPIO_PINS (49 ); +DECLARE_MSM_GPIO_PINS (50 ); +DECLARE_MSM_GPIO_PINS (51 ); +DECLARE_MSM_GPIO_PINS (52 ); +DECLARE_MSM_GPIO_PINS (53 ); +DECLARE_MSM_GPIO_PINS (54 ); +DECLARE_MSM_GPIO_PINS (55 ); +DECLARE_MSM_GPIO_PINS (56 ); +DECLARE_MSM_GPIO_PINS (57 ); +DECLARE_MSM_GPIO_PINS (58 ); +DECLARE_MSM_GPIO_PINS (59 ); +DECLARE_MSM_GPIO_PINS (60 ); +DECLARE_MSM_GPIO_PINS (61 ); +DECLARE_MSM_GPIO_PINS (62 ); +DECLARE_MSM_GPIO_PINS (63 ); +DECLARE_MSM_GPIO_PINS (64 ); +DECLARE_MSM_GPIO_PINS (65 ); +DECLARE_MSM_GPIO_PINS (66 ); +DECLARE_MSM_GPIO_PINS (67 ); +DECLARE_MSM_GPIO_PINS (68 ); +DECLARE_MSM_GPIO_PINS (69 ); +DECLARE_MSM_GPIO_PINS (70 ); +DECLARE_MSM_GPIO_PINS (71 ); +DECLARE_MSM_GPIO_PINS (72 ); +DECLARE_MSM_GPIO_PINS (73 ); +DECLARE_MSM_GPIO_PINS (74 ); +DECLARE_MSM_GPIO_PINS (75 ); +DECLARE_MSM_GPIO_PINS (76 ); +DECLARE_MSM_GPIO_PINS (77 ); +DECLARE_MSM_GPIO_PINS (78 ); +DECLARE_MSM_GPIO_PINS (79 ); +DECLARE_MSM_GPIO_PINS (80 ); +DECLARE_MSM_GPIO_PINS (81 ); +DECLARE_MSM_GPIO_PINS (82 ); +DECLARE_MSM_GPIO_PINS (83 ); +DECLARE_MSM_GPIO_PINS (84 ); +DECLARE_MSM_GPIO_PINS (85 ); +DECLARE_MSM_GPIO_PINS (86 ); +DECLARE_MSM_GPIO_PINS (87 ); +DECLARE_MSM_GPIO_PINS (88 ); +DECLARE_MSM_GPIO_PINS (89 ); +DECLARE_MSM_GPIO_PINS (90 ); +DECLARE_MSM_GPIO_PINS (91 ); +DECLARE_MSM_GPIO_PINS (92 ); +DECLARE_MSM_GPIO_PINS (93 ); +DECLARE_MSM_GPIO_PINS (94 ); +DECLARE_MSM_GPIO_PINS (95 ); +DECLARE_MSM_GPIO_PINS (96 ); +DECLARE_MSM_GPIO_PINS (97 ); +DECLARE_MSM_GPIO_PINS (98 ); +DECLARE_MSM_GPIO_PINS (99 ); +DECLARE_MSM_GPIO_PINS (100 ); +DECLARE_MSM_GPIO_PINS (101 ); +DECLARE_MSM_GPIO_PINS (102 ); +DECLARE_MSM_GPIO_PINS (103 ); +DECLARE_MSM_GPIO_PINS (104 ); +DECLARE_MSM_GPIO_PINS (105 ); +DECLARE_MSM_GPIO_PINS (106 ); +DECLARE_MSM_GPIO_PINS (107 ); +DECLARE_MSM_GPIO_PINS (108 ); +DECLARE_MSM_GPIO_PINS (109 ); +DECLARE_MSM_GPIO_PINS (110 ); +DECLARE_MSM_GPIO_PINS (111 ); +DECLARE_MSM_GPIO_PINS (112 ); +DECLARE_MSM_GPIO_PINS (113 ); + +static const unsigned int sdc1_clk_pins[] = {114 }; +static const unsigned int sdc1_cmd_pins[] = {115 }; +static const unsigned int sdc1_data_pins[] = {116 }; +static const unsigned int sdc2_clk_pins[] = {117 }; +static const unsigned int sdc2_cmd_pins[] = {118 }; +static const unsigned int sdc2_data_pins[] = {119 }; +static const unsigned int sdc1_rclk_pins[] = {120 }; + +enum sdm660_functions { + msm_mux_blsp_spi1, + msm_mux_gpio, + msm_mux_blsp_uim1, + msm_mux_tgu_ch0, + msm_mux_qdss_gpio4, + msm_mux_atest_gpsadc1, + msm_mux_blsp_uart1, + msm_mux_phase_flag14, + msm_mux_blsp_i2c2, + msm_mux_phase_flag31, + msm_mux_blsp_spi3, + msm_mux_blsp_spi3_cs1, + msm_mux_blsp_spi3_cs2, + msm_mux_wlan1_adc1, + msm_mux_atest_usb13, + msm_mux_tgu_ch1, + msm_mux_qdss_gpio5, + msm_mux_atest_gpsadc0, + msm_mux_blsp_i2c1, + msm_mux_ddr_bist, + msm_mux_atest_tsens2, + msm_mux_atest_usb1, + msm_mux_blsp_spi2, + msm_mux_blsp_uim2, + msm_mux_phase_flag3, + msm_mux_bimc_dte1, + msm_mux_wlan1_adc0, + msm_mux_atest_usb12, + msm_mux_bimc_dte0, + msm_mux_blsp_i2c3, + msm_mux_wlan2_adc1, + msm_mux_atest_usb11, + msm_mux_dbg_out, + msm_mux_wlan2_adc0, + msm_mux_atest_usb10, + msm_mux_blsp_spi4, + msm_mux_pri_mi2s, + msm_mux_phase_flag26, + msm_mux_qdss_cti0_a, + msm_mux_qdss_cti0_b, + msm_mux_qdss_cti1_a, + msm_mux_qdss_cti1_b, + msm_mux_pri_mi2s_ws, + msm_mux_phase_flag27, + msm_mux_blsp_i2c4, + msm_mux_phase_flag28, + msm_mux_blsp_uart5, + msm_mux_blsp_spi5, + msm_mux_blsp_uim5, + msm_mux_phase_flag5, + msm_mux_blsp_i2c5, + msm_mux_blsp_spi6, + msm_mux_blsp_uart2, + msm_mux_blsp_uim6, + msm_mux_phase_flag11, + msm_mux_vsense_data0, + msm_mux_blsp_i2c6, + msm_mux_phase_flag12, + msm_mux_vsense_data1, + msm_mux_phase_flag13, + msm_mux_vsense_mode, + msm_mux_blsp_spi7, + msm_mux_blsp_uart6_a, + msm_mux_blsp_uart6_b, + msm_mux_sec_mi2s, + msm_mux_sndwire_clk, + msm_mux_phase_flag17, + msm_mux_vsense_clkout, + msm_mux_sndwire_data, + msm_mux_phase_flag18, + msm_mux_blsp_i2c7, + msm_mux_phase_flag19, + msm_mux_vfr_1, + msm_mux_phase_flag20, + msm_mux_blsp_spi8_cs1, + msm_mux_blsp_spi8_cs2, + msm_mux_m_voc, + msm_mux_phase_flag21, + msm_mux_phase_flag22, + msm_mux_blsp_i2c8_a, + msm_mux_blsp_i2c8_b, + msm_mux_phase_flag23, + msm_mux_pwr_modem, + msm_mux_phase_flag24, + msm_mux_qdss_gpio, + msm_mux_cam_mclk, + msm_mux_pwr_nav, + msm_mux_qdss_gpio0, + msm_mux_qspi_data0, + msm_mux_pwr_crypto, + msm_mux_qdss_gpio1, + msm_mux_qspi_data1, + msm_mux_agera_pll, + msm_mux_qdss_gpio2, + msm_mux_qspi_data2, + msm_mux_jitter_bist, + msm_mux_qdss_gpio3, + msm_mux_qdss_gpio7, + msm_mux_mdss_vsync0, + msm_mux_mdss_vsync1, + msm_mux_mdss_vsync2, + msm_mux_mdss_vsync3, + msm_mux_qdss_gpio9, + msm_mux_atest_usb2, + msm_mux_cci_i2c, + msm_mux_pll_bypassnl, + msm_mux_atest_tsens, + msm_mux_atest_usb21, + msm_mux_pll_reset, + msm_mux_atest_usb23, + msm_mux_qdss_gpio6, + msm_mux_qspi_cs, + msm_mux_qdss_gpio10, + msm_mux_qdss_gpio11, + msm_mux_cci_async, + msm_mux_qdss_gpio12, + msm_mux_qdss_gpio13, + msm_mux_qspi_clk, + msm_mux_phase_flag30, + msm_mux_qdss_gpio14, + msm_mux_qspi_resetn, + msm_mux_phase_flag1, + msm_mux_qdss_gpio15, + msm_mux_phase_flag2, + msm_mux_phase_flag9, + msm_mux_qspi_data3, + msm_mux_phase_flag15, + msm_mux_qdss_gpio8, + msm_mux_phase_flag16, + msm_mux_phase_flag6, + msm_mux_phase_flag29, + msm_mux_phase_flag25, + msm_mux_phase_flag10, + msm_mux_atest_usb20, + msm_mux_gcc_gp1, + msm_mux_phase_flag4, + msm_mux_atest_usb22, + msm_mux_gcc_gp2, + msm_mux_atest_char, + msm_mux_mdp_vsync, + msm_mux_gcc_gp3, + msm_mux_atest_char3, + msm_mux_cri_trng0, + msm_mux_atest_char2, + msm_mux_cri_trng1, + msm_mux_atest_char1, + msm_mux_audio_ref, + msm_mux_cri_trng, + msm_mux_atest_char0, + msm_mux_blsp_spi8_a, + msm_mux_blsp_spi8_b, + msm_mux_sp_cmu, + msm_mux_nav_pps_a, + msm_mux_nav_pps_b, + msm_mux_nav_pps_c, + msm_mux_gps_tx_a, + msm_mux_gps_tx_b, + msm_mux_gps_tx_c, + msm_mux_adsp_ext, + msm_mux_ssc_irq, + msm_mux_isense_dbg, + msm_mux_phase_flag0, + msm_mux_phase_flag7, + msm_mux_phase_flag8, + msm_mux_tsense_pwm1, + msm_mux_tsense_pwm2, + msm_mux_mss_lte, + msm_mux_uim2_data, + msm_mux_uim2_clk, + msm_mux_uim2_reset, + msm_mux_uim2_present, + msm_mux_uim1_data, + msm_mux_uim1_clk, + msm_mux_uim1_reset, + msm_mux_uim1_present, + msm_mux_uim_batt, + msm_mux_pa_indicator,drivers/pinctrl/qcom/pinctrl-sdm660.c line 527
Quoted 10 lines
drivers/pinctrl/qcom/pinctrl-sdm660.c new file +10
-0+ msm_mux_ldo_en, + msm_mux_ldo_update, + msm_mux_qlink_request, + msm_mux_qlink_enable, + msm_mux_prng_rosc, + msm_mux__, +}; + +static const char *const gpio_groups[] = { + "gpio0", "gpio1", "gpio2", "gpio3", "gpio4", "gpio5", "gpio6","gpio7",
drivers/pinctrl/qcom/pinctrl-sdm660.c line 529
Quoted 2 lines
drivers/pinctrl/qcom/pinctrl-sdm660.c new file +2
-0+"gpio8" ,"gpio9" ,"gpio10" ,"gpio11" ,"gpio12" ,"gpio13" ,"gpio14" , + "gpio15", "gpio16", "gpio17", "gpio18", "gpio19", "gpio20","gpio21",
drivers/pinctrl/qcom/pinctrl-sdm660.c line 530
Quoted 1 line
drivers/pinctrl/qcom/pinctrl-sdm660.c new file +1
-0+ "gpio22", "gpio23", "gpio24", "gpio25", "gpio26", "gpio27","gpio28",
drivers/pinctrl/qcom/pinctrl-sdm660.c line 531
Quoted 1 line
drivers/pinctrl/qcom/pinctrl-sdm660.c new file +1
-0+ "gpio29", "gpio30", "gpio31", "gpio32", "gpio33", "gpio34","gpio35",
drivers/pinctrl/qcom/pinctrl-sdm660.c line 532
Quoted 1 line
drivers/pinctrl/qcom/pinctrl-sdm660.c new file +1
-0+ "gpio36", "gpio37", "gpio38", "gpio39", "gpio40", "gpio41","gpio42",
drivers/pinctrl/qcom/pinctrl-sdm660.c line 533
Quoted 1 line
drivers/pinctrl/qcom/pinctrl-sdm660.c new file +1
-0+ "gpio43", "gpio44", "gpio45", "gpio46", "gpio47", "gpio48","gpio49",
drivers/pinctrl/qcom/pinctrl-sdm660.c line 534
Quoted 1 line
drivers/pinctrl/qcom/pinctrl-sdm660.c new file +1
-0+ "gpio50", "gpio51", "gpio52", "gpio53", "gpio54", "gpio55","gpio56",
drivers/pinctrl/qcom/pinctrl-sdm660.c line 535
Quoted 1 line
drivers/pinctrl/qcom/pinctrl-sdm660.c new file +1
-0+ "gpio57", "gpio58", "gpio59", "gpio60", "gpio61", "gpio62","gpio63",
drivers/pinctrl/qcom/pinctrl-sdm660.c line 536
Quoted 1 line
drivers/pinctrl/qcom/pinctrl-sdm660.c new file +1
-0+ "gpio64", "gpio65", "gpio66", "gpio67", "gpio68", "gpio69","gpio70",
drivers/pinctrl/qcom/pinctrl-sdm660.c line 537
Quoted 1 line
drivers/pinctrl/qcom/pinctrl-sdm660.c new file +1
-0+ "gpio71", "gpio72", "gpio73", "gpio74", "gpio75", "gpio76","gpio77",
drivers/pinctrl/qcom/pinctrl-sdm660.c line 538
Quoted 1 line
drivers/pinctrl/qcom/pinctrl-sdm660.c new file +1
-0+ "gpio78", "gpio79", "gpio80", "gpio81", "gpio82", "gpio83","gpio84",
drivers/pinctrl/qcom/pinctrl-sdm660.c line 539
Quoted 1 line
drivers/pinctrl/qcom/pinctrl-sdm660.c new file +1
-0+ "gpio85", "gpio86", "gpio87", "gpio88", "gpio89", "gpio90","gpio91",
drivers/pinctrl/qcom/pinctrl-sdm660.c line 540
Quoted 1 line
drivers/pinctrl/qcom/pinctrl-sdm660.c new file +1
-0+ "gpio92", "gpio93", "gpio94", "gpio95", "gpio96", "gpio97","gpio98",
Quoted 164 lines
drivers/pinctrl/qcom/pinctrl-sdm660.c new file +164
-0+"gpio99" ,"gpio100" ,"gpio101" ,"gpio102" ,"gpio103" ,"gpio104" , +"gpio105" ,"gpio106" ,"gpio107" ,"gpio108" ,"gpio109" ,"gpio110" , + "gpio111", "gpio112", "gpio113", +}; +static const char *const blsp_spi1_groups[] = { +"gpio0" ,"gpio1" ,"gpio2" ,"gpio3" ,"gpio46" , +}; +static const char *const blsp_uim1_groups[] = { +"gpio0" ,"gpio1" , +}; +static const char *const tgu_ch0_groups[] = { +"gpio0" , +}; +static const char *const qdss_gpio4_groups[] = { +"gpio0" ,"gpio36" , +}; +static const char *const atest_gpsadc1_groups[] = { +"gpio0" , +}; +static const char *const blsp_uart1_groups[] = { +"gpio0" ,"gpio1" ,"gpio2" ,"gpio3" , +}; +static const char *const phase_flag14_groups[] = { +"gpio5" , +}; +static const char *const blsp_i2c2_groups[] = { +"gpio6" ,"gpio7" , +}; +static const char *const phase_flag31_groups[] = { +"gpio6" , +}; +static const char *const blsp_spi3_groups[] = { +"gpio8" ,"gpio9" ,"gpio10" ,"gpio11" , +}; +static const char *const blsp_spi3_cs1_groups[] = { +"gpio30" , +}; +static const char *const blsp_spi3_cs2_groups[] = { +"gpio65" , +}; +static const char *const wlan1_adc1_groups[] = { +"gpio8" , +}; +static const char *const atest_usb13_groups[] = { +"gpio8" , +}; +static const char *const tgu_ch1_groups[] = { +"gpio1" , +}; +static const char *const qdss_gpio5_groups[] = { +"gpio1" ,"gpio37" , +}; +static const char *const atest_gpsadc0_groups[] = { +"gpio1" , +}; +static const char *const blsp_i2c1_groups[] = { +"gpio2" ,"gpio3" , +}; +static const char *const ddr_bist_groups[] = { +"gpio3" ,"gpio8" ,"gpio9" ,"gpio10" , +}; +static const char *const atest_tsens2_groups[] = { +"gpio3" , +}; +static const char *const atest_usb1_groups[] = { +"gpio3" , +}; +static const char *const blsp_spi2_groups[] = { +"gpio4" ,"gpio5" ,"gpio6" ,"gpio7" , +}; +static const char *const blsp_uim2_groups[] = { +"gpio4" ,"gpio5" , +}; +static const char *const phase_flag3_groups[] = { +"gpio4" , +}; +static const char *const bimc_dte1_groups[] = { +"gpio8" ,"gpio10" , +}; +static const char *const wlan1_adc0_groups[] = { +"gpio9" , +}; +static const char *const atest_usb12_groups[] = { +"gpio9" , +}; +static const char *const bimc_dte0_groups[] = { +"gpio9" ,"gpio11" , +}; +static const char *const blsp_i2c3_groups[] = { +"gpio10" ,"gpio11" , +}; +static const char *const wlan2_adc1_groups[] = { +"gpio10" , +}; +static const char *const atest_usb11_groups[] = { +"gpio10" , +}; +static const char *const dbg_out_groups[] = { +"gpio11" , +}; +static const char *const wlan2_adc0_groups[] = { +"gpio11" , +}; +static const char *const atest_usb10_groups[] = { +"gpio11" , +}; +static const char *const RCM_MARKER_groups[] = { +"gpio12" ,"gpio13" , +}; +static const char *const blsp_spi4_groups[] = { +"gpio12" ,"gpio13" ,"gpio14" ,"gpio15" , +}; +static const char *const pri_mi2s_groups[] = { +"gpio12" ,"gpio14" ,"gpio15" ,"gpio61" , +}; +static const char *const phase_flag26_groups[] = { +"gpio12" , +}; +static const char *const qdss_cti0_a_groups[] = { +"gpio49" ,"gpio50" , +}; +static const char *const qdss_cti0_b_groups[] = { +"gpio13" ,"gpio21" , +}; +static const char *const qdss_cti1_a_groups[] = { +"gpio53" ,"gpio55" , +}; +static const char *const qdss_cti1_b_groups[] = { +"gpio12" ,"gpio66" , +}; +static const char *const pri_mi2s_ws_groups[] = { +"gpio13" , +}; +static const char *const phase_flag27_groups[] = { +"gpio13" , +}; +static const char *const blsp_i2c4_groups[] = { +"gpio14" ,"gpio15" , +}; +static const char *const phase_flag28_groups[] = { +"gpio14" , +}; +static const char *const blsp_uart5_groups[] = { +"gpio16" ,"gpio17" ,"gpio18" ,"gpio19" , +}; +static const char *const blsp_spi5_groups[] = { +"gpio16" ,"gpio17" ,"gpio18" ,"gpio19" , +}; +static const char *const blsp_uim5_groups[] = { +"gpio16" ,"gpio17" , +}; +static const char *const phase_flag5_groups[] = { +"gpio17" , +}; +static const char *const blsp_i2c5_groups[] = { +"gpio18" ,"gpio19" , +}; +static const char *const blsp_spi6_groups[] = { +"gpio49" ,"gpio52" ,"gpio22" ,"gpio23" , +}; +static const char *const blsp_uart2_groups[] = { +"gpio4" ,"gpio5" ,"gpio6" ,"gpio7" , +}; +static const char *const blsp_uim6_groups[]
Signature · 1 line
Sent from my Android device with K-9 Mail. Please excuse my brevity.
I know, just did this because it is basically exactly same as other qcom pinctrl docs and they also only had one patch.
Quoted 13 lines · Michal Vokáč
Hi Craig,
Quoted 6 lines · Craig Tatlor
Add initial pinctrl driver to support pin configuration with pinctrl framework for sdm660.
Based off CAF implementation.Signed-off-by Craig Tatlor <[email protected]>---
The documentation portion should be a separate patch. Please refer to
Documentation/devicetree/bindings/submitting-patches.txt
Quoted 6 lines
It is easier for DT maintainers to review just the relevant part. The binding patches are also rebased to a separate tree as they are not Linux specific and can be re-used in other OSes
Best regards,
Michal
I know, just did this because it is basically exactly same as other qcom pinctrl docs and they also only had one patch.
Sorry if you got this multiple times, apparently my email client adds HTML to non inline replies
Quoted 1,028 lines
Quoted 9 lines
Changes from v1:
Adds gpio-ranges property to bindings.../bindings/pinctrl/qcom,sdm660-pinctrl.txt | 202 +++ drivers/pinctrl/qcom/Kconfig | 10 + drivers/pinctrl/qcom/Makefile | 1 + drivers/pinctrl/qcom/pinctrl-sdm660.c | 1451+++++++++++++++++
Quoted 2 lines
4 files changed, 1663 insertions(+)create mode 100644
Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txtQuoted 3 lines
create mode 100644
drivers/pinctrl/qcom/pinctrl-sdm660.cdiff --git
a/Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txtb/Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txtQuoted 4 lines
new file mode 100644
index 000000000000..801960ad2112
---/dev/null
+++
b/Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txtDocumentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt line 3
Quoted 4 lines
Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt new file +3
-0@@ -0,0 +1,202 @@ +Qualcomm Technologies, Inc. SDM660 TLMM block + +This binding describes the Top Level Mode Multiplexer block found inthe
Quoted 16 lines
Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt new file +16
-0+SDM660 platform. + +- compatible: + Usage: required + Value type: <string> + Definition: must be "qcom,sdm660-pinctrl" + +- reg: + Usage: required + Value type: <prop-encoded-array> + Definition: the base address and size of the TLMM register space. + +- interrupts: + Usage: required + Value type: <prop-encoded-array> + Definition: should specify the TLMM summary IRQ.Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt
Quoted 10 lines
Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt new file +10
-0+ +- interrupt-controller: + Usage: required + Value type: <none> + Definition: identifies this node as an interrupt controller + +- #interrupt-cells: + Usage: required + Value type: <u32> + Definition: must be 2. Specifying the pin number and flags, asdefined
Quoted 7 lines
Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt new file +7
-0+ in <dt-bindings/interrupt-controller/irq.h> + +- gpio-controller: + Usage: required + Value type: <none> + Definition: identifies this node as a gpio controller +Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt
Quoted 10 lines
Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt new file +10
-0+- gpio-ranges: + Usage: required + Value type: <prop-encoded-array> + Definition: Specifies the mapping between gpio controller and + pin-controller pins. + +- #gpio-cells: + Usage: required + Value type: <u32> + Definition: must be 2. Specifying the pin number and flags, asdefined
Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt
Quoted 3 lines
Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt new file +3
-0+ in <dt-bindings/gpio/gpio.h> + +Please refer to ../gpio/gpio.txt and
../interrupt-controller/interrupts.txtforDocumentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt
Quoted 3 lines
Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt new file +3
-0+a general description of GPIO and interrupt bindings. + +Please refer to pinctrl-bindings.txt in this directory for detailsof the
Review line 53
Quoted 1 line
(quoted diff) +1
-0+common pinctrl bindings used by client devices, including themeaning of the
Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt
Quoted 3 lines
Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt new file +3
-0+phrase "pin configuration node". + +The pin configuration nodes act as a container for an arbitrarynumber of
Review line 57
Quoted 1 line
(quoted diff) +1
-0+subnodes. Each of these subnodes represents some desiredconfiguration for a
Review line 58
Quoted 1 line
(quoted diff) +1
-0+pin, a group, or a list of pins or groups. This configuration caninclude the
Review line 59
Quoted 1 line
(quoted diff) +1
-0+mux function to select on those pin(s)/group(s), and various pinconfiguration
Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt
Quoted 6 lines
Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt new file +6
-0+parameters, such as pull-up, drive strength, etc. + + +PIN CONFIGURATION NODES: + +The name of each subnode is not important; all subnodes should beenumerated
Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt
Quoted 3 lines
Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt new file +3
-0+and processed purely based on their content. + +Each subnode only affects those parameters that are explicitlylisted. In
Review line 69
Quoted 1 line
(quoted diff) +1
-0+other words, a subnode that lists a mux function but no pinconfiguration
Review line 70
Quoted 1 line
(quoted diff) +1
-0+parameters implies no information about any pin configurationparameters.
Review line 71
Quoted 1 line
(quoted diff) +1
-0+Similarly, a pin subnode that describes a pullup parameter impliesno
Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt
Quoted 4 lines
Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt new file +4
-0+information about e.g. the mux function. + + +The following generic properties as defined in pinctrl-bindings.txtare valid
Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt
Quoted 6 lines
Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt new file +6
-0+to specify in a pin configuration subnode: + +- pins: + Usage: required + Value type: <string-array> + Definition: List of gpio pins affected by the properties specifiedin
Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt
Quoted 4 lines
Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt new file +4
-0+ this subnode. Valid pins are: + gpio0-gpio113, + Supports mux, bias and drive-strength + sdc1_clk, sdc1_cmd, sdc1_data sdc2_clk, sdc2_cmd, sdc2_data
sdc1_rclk,Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt
Quoted 6 lines
Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt new file +6
-0+ Supports bias and drive-strength + +- function: + Usage: required + Value type: <string> + Definition: Specify the alternative function to be configured forthe
Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt
Quoted 6 lines
Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt new file +6
-0+ specified pins. Functions are only valid for gpio pins. + Valid values are: + + blsp_uart1, blsp_spi1, blsp_i2c1, blsp_uim1, atest_tsens, + bimc_dte1, dac_calib0, blsp_spi8, blsp_uart8, blsp_uim8, + qdss_cti_trig_out_b, bimc_dte0, dac_calib1,
qdss_cti_trig_in_b,Review line 99
Quoted 2 lines
(quoted diff) +2
-0+ dac_calib2, atest_tsens2, atest_usb1, blsp_spi10, blsp_uart10, + blsp_uim10, atest_bbrx1, atest_usb13, atest_bbrx0,
atest_usb12,Review line 101
Quoted 2 lines
(quoted diff) +2
-0+ mdp_vsync, edp_lcd, blsp_i2c10, atest_gpsadc1, atest_usb11, + atest_gpsadc0, edp_hot, atest_usb10, m_voc, dac_gpio,
atest_char,Review line 102
Quoted 1 line
(quoted diff) +1
-0+ cam_mclk, pll_bypassnl, qdss_stm7, blsp_i2c8,
qdss_tracedata_b,Review line 103
Quoted 1 line
(quoted diff) +1
-0+ pll_reset, qdss_stm6, qdss_stm5, qdss_stm4, atest_usb2,
cci_i2c,Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt
Quoted 5 lines
Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt new file +5
-0+ qdss_stm3, dac_calib3, atest_usb23, atest_char3, dac_calib4, + qdss_stm2, atest_usb22, atest_char2, qdss_stm1, dac_calib5, + atest_usb21, atest_char1, dbg_out, qdss_stm0, dac_calib6, + atest_usb20, atest_char0, dac_calib10, qdss_stm10, + qdss_cti_trig_in_a, cci_timer4, blsp_spi6, blsp_uart6,
blsp_uim6,Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt
Quoted 9 lines
Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt new file +9
-0+ blsp2_spi, qdss_stm9, qdss_cti_trig_out_a, dac_calib11, + qdss_stm8, cci_timer0, qdss_stm13, dac_calib7, cci_timer1, + qdss_stm12, dac_calib8, cci_timer2, blsp1_spi, qdss_stm11, + dac_calib9, cci_timer3, cci_async, dac_calib12, blsp_i2c6, + qdss_tracectl_a, dac_calib13, qdss_traceclk_a, dac_calib14, + dac_calib15, hdmi_rcv, dac_calib16, hdmi_cec, pwr_modem, + dac_calib17, hdmi_ddc, pwr_nav, dac_calib18, pwr_crypto, + dac_calib19, hdmi_hot, dac_calib20, dac_calib21, pci_e0, + dac_calib22, dac_calib23, dac_calib24, tsif1_sync,
dac_calib25,Review line 119
Quoted 2 lines
(quoted diff) +2
-0+ sd_write, tsif1_error, blsp_spi2, blsp_uart2, blsp_uim2, + qdss_cti, blsp_i2c2, blsp_spi3, blsp_uart3, blsp_uim3,
blsp_i2c3,Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt
Quoted 3 lines
Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt new file +3
-0+ uim3, blsp_spi9, blsp_uart9, blsp_uim9, blsp10_spi, blsp_i2c9, + blsp_spi7, blsp_uart7, blsp_uim7, qdss_tracedata_a, blsp_i2c7, + qua_mi2s, gcc_gp1_clk_a, ssc_irq, uim4, blsp_spi11,
blsp_uart11,Review line 123
Quoted 1 line
(quoted diff) +1
-0+ blsp_uim11, gcc_gp2_clk_a, gcc_gp3_clk_a, blsp_i2c11,
cri_trng0,Review line 124
Quoted 1 line
(quoted diff) +1
-0+ cri_trng1, cri_trng, qdss_stm18, pri_mi2s, qdss_stm17,
blsp_spi4,Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt
Quoted 8 lines
Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt new file +8
-0+ blsp_uart4, blsp_uim4, qdss_stm16, qdss_stm15, blsp_i2c4, + qdss_stm14, dac_calib26, spkr_i2s, audio_ref, lpass_slimbus, + isense_dbg, tsense_pwm1, tsense_pwm2, btfm_slimbus, ter_mi2s, + qdss_stm22, qdss_stm21, qdss_stm20, qdss_stm19, gcc_gp1_clk_b, + sec_mi2s, blsp_spi5, blsp_uart5, blsp_uim5, gcc_gp2_clk_b, + gcc_gp3_clk_b, blsp_i2c5, blsp_spi12, blsp_uart12, blsp_uim12, + qdss_stm25, qdss_stm31, blsp_i2c12, qdss_stm30, qdss_stm29, + tsif1_clk, qdss_stm28, tsif1_en, tsif1_data, sdc4_cmd,
qdss_stm27,Review line 133
Quoted 1 line
(quoted diff) +1
-0+ qdss_traceclk_b, tsif2_error, sdc43, vfr_1, qdss_stm26,
tsif2_clk,Review line 134
Quoted 1 line
(quoted diff) +1
-0+ sdc4_clk, qdss_stm24, tsif2_en, sdc42, qdss_stm23,
qdss_tracectl_b,Review line 136
Quoted 2 lines
(quoted diff) +2
-0+ sd_card, tsif2_data, sdc41, tsif2_sync, sdc40, mdp_vsync_p_b, + ldo_en, mdp_vsync_s_b, ldo_update, blsp11_uart_tx_b,
blsp11_uart_rx_b,Review line 137
Quoted 1 line
(quoted diff) +1
-0+ blsp11_i2c_sda_b, prng_rosc, blsp11_i2c_scl_b, uim2, uim1,
uim_batt,Review line 139
Quoted 2 lines
(quoted diff) +2
-0+ pci_e2, pa_indicator, adsp_ext, ddr_bist, qdss_tracedata_11, + qdss_tracedata_12, modem_tsync, nav_dr, nav_pps, pci_e1,
gsm_tx,Review line 140
Quoted 1 line
(quoted diff) +1
-0+ qspi_cs, ssbi2, ssbi1, mss_lte, qspi_clk, qspi0, qspi1, qspi2,qspi3,
Quoted 11 lines
Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt new file +11
-0+ gpio + +- bias-disable: + Usage: optional + Value type: <none> + Definition: The specified pins should be configued as no pull. + +- bias-pull-down: + Usage: optional + Value type: <none> + Definition: The specified pins should be configued as pull down.Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt
Quoted 10 lines
Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt new file +10
-0+ +- bias-pull-up: + Usage: optional + Value type: <none> + Definition: The specified pins should be configued as pull up. + +- output-high: + Usage: optional + Value type: <none> + Definition: The specified pins are configured in output mode,driven
Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt
Quoted 7 lines
Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt new file +7
-0+ high. + Not valid for sdc pins. + +- output-low: + Usage: optional + Value type: <none> + Definition: The specified pins are configured in output mode,driven
Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt
Quoted 7 lines
Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt new file +7
-0+ low. + Not valid for sdc pins. + +- drive-strength: + Usage: optional + Value type: <u32> + Definition: Selects the drive strength for the specified pins, inmA.
Review
Quoted 28 lines
Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt new file +27
-0+ Valid values are: 2, 4, 6, 8, 10, 12, 14 and 16 + +Example: + + tlmm: pinctrl@1010000 { + compatible = "qcom,sdm660-pinctrl"; + reg = <0x1010000 0x300000>; + interrupts = <0 208 0>; + gpio-controller; + gpio-ranges = <&tlmm 0 0 114>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + + uart_console_active: uart_console_active { + mux { + pins = "gpio4", "gpio5"; + function = "blsp_uart8"; + }; + + config { + pins = "gpio4", "gpio5"; + drive-strength = <2>; + bias-disable; + }; + }; + };(quoted diff) +0
-0b/drivers/pinctrl/qcom/Kconfig
drivers/pinctrl/qcom/Kconfig config PINCTRL_QCOM_SSBI_PMIC · line 147
Quoted 5 lines
index 195492033075..091beadb8a1c 100644
drivers/pinctrl/qcom/Kconfig +0
-0@@ -147,6 +147,16 @@ config PINCTRL_QCOM_SSBI_PMIC which are using SSBI for communication with SoC. ExamplePMIC's
drivers/pinctrl/qcom/Kconfig config PINCTRL_QCOM_SSBI_PMIC
Quoted 4 lines
drivers/pinctrl/qcom/Kconfig +2
-0devices are pm8058 and pm8921. +config PINCTRL_SDM660 + tristate "Qualcomm Technologies Inc SDM660 pin controllerdriver"
drivers/pinctrl/qcom/Kconfig config PINCTRL_QCOM_SSBI_PMIC
Quoted 4 lines
drivers/pinctrl/qcom/Kconfig +4
-0+ depends on GPIOLIB && OF + select PINCTRL_MSM + help + This is the pinctrl, pinmux, pinconf and gpiolib driver forthe
drivers/pinctrl/qcom/Kconfig config PINCTRL_QCOM_SSBI_PMIC
Quoted 6 lines
drivers/pinctrl/qcom/Kconfig +4
-0+ Qualcomm Technologies Inc TLMM block found on the Qualcomm + Technologies Inc SDM660 platform. + + config PINCTRL_SDM845 tristate "Qualcomm Technologies Inc SDM845 pin controllerdriver"
Review
Quoted 2 lines
drivers/pinctrl/qcom/Kconfig +0
-0depends on GPIOLIB && OF(quoted diff) +0
-0b/drivers/pinctrl/qcom/Makefile
drivers/pinctrl/qcom/Makefile obj-$(CONFIG_PINCTRL_QCOM_SPMI_PMIC) +=
Quoted 4 lines
index
0c6f3ddc296d..9b08808a2f1c100644drivers/pinctrl/qcom/Makefile +0
-0@@ -19,4 +19,5 @@ obj-$(CONFIG_PINCTRL_QCOM_SPMI_PMIC) +=pinctrl-spmi-gpio.o
Review
Quoted 6 lines
drivers/pinctrl/qcom/Makefile +1
-0obj-$(CONFIG_PINCTRL_QCOM_SPMI_PMIC) += pinctrl-spmi-mpp.o obj-$(CONFIG_PINCTRL_QCOM_SSBI_PMIC) += pinctrl-ssbi-gpio.o obj-$(CONFIG_PINCTRL_QCOM_SSBI_PMIC) += pinctrl-ssbi-mpp.o +obj-$(CONFIG_PINCTRL_SDM660) += pinctrl-sdm660.o obj-$(CONFIG_PINCTRL_SDM845) += pinctrl-sdm845.o(quoted diff) +0
-0
b/drivers/pinctrl/qcom/pinctrl-sdm660.cQuoted 522 lines
new file mode 100644
index 000000000000..ded56111f168drivers/pinctrl/qcom/pinctrl-sdm660.c new file +517
-0@@ -0,0 +1,1451 @@ +// SPDX-License-Identifier: GPL-2.0 +/* +* Copyright (c) 2016, The Linux Foundation. All rights reserved. +* Copyright (c) 2018, Craig Tatlor. +*/ + +#include <linux/module.h> +#include <linux/of.h> +#include <linux/platform_device.h> +#include <linux/pinctrl/pinctrl.h> + +#include "pinctrl-msm.h" + +#define NORTH 0x00900000 +#define CENTER 0x00500000 +#define SOUTH 0x00100000 +#define REG_SIZE 0x1000 + +#define FUNCTION (fname) \ + [msm_mux_##fname] = { \ + .name = #fname, \ + .groups = fname##_groups, \ + .ngroups = ARRAY_SIZE(fname##_groups), \ + } + + +#define PINGROUP(id, base, f1, f2, f3, f4, f5, f6, f7, f8, f9) \ + { \ + .name = "gpio" #id, \ + .pins = gpio##id##_pins, \ + .npins = (unsigned)ARRAY_SIZE(gpio##id##_pins), \ + .funcs = (int[]){ \ + msm_mux_gpio, /* gpio mode */ \ + msm_mux_##f1, \ + msm_mux_##f2, \ + msm_mux_##f3, \ + msm_mux_##f4, \ + msm_mux_##f5, \ + msm_mux_##f6, \ + msm_mux_##f7, \ + msm_mux_##f8, \ + msm_mux_##f9 \ + }, \ + .nfuncs = 10, \ + .ctl_reg = base + REG_SIZE * id, \ + .io_reg = base + 0x4 + REG_SIZE * id, \ + .intr_cfg_reg = base + 0x8 + REG_SIZE * id, \ + .intr_status_reg = base + 0xc + REG_SIZE * id, \ + .intr_target_reg = base + 0x8 + REG_SIZE * id, \ + .mux_bit = 2, \ + .pull_bit = 0, \ + .drv_bit = 6, \ + .oe_bit = 9, \ + .in_bit = 0, \ + .out_bit = 1, \ + .intr_enable_bit = 0, \ + .intr_status_bit = 0, \ + .intr_target_bit = 5, \ + .intr_target_kpss_val = 3, \ + .intr_raw_status_bit = 4, \ + .intr_polarity_bit = 1, \ + .intr_detection_bit = 2, \ + .intr_detection_width = 2, \ + } + +#define SDC_QDSD_PINGROUP (pg_name, ctl, pull, drv) \ + { \ + .name = #pg_name, \ + .pins = pg_name##_pins, \ + .npins = (unsigned)ARRAY_SIZE(pg_name##_pins), \ + .ctl_reg = ctl, \ + .io_reg = 0, \ + .intr_cfg_reg = 0, \ + .intr_status_reg = 0, \ + .intr_target_reg = 0, \ + .mux_bit = -1, \ + .pull_bit = pull, \ + .drv_bit = drv, \ + .oe_bit = -1, \ + .in_bit = -1, \ + .out_bit = -1, \ + .intr_enable_bit = -1, \ + .intr_status_bit = -1, \ + .intr_target_bit = -1, \ + .intr_raw_status_bit = -1, \ + .intr_polarity_bit = -1, \ + .intr_detection_bit = -1, \ + .intr_detection_width = -1, \ + } + +static const struct pinctrl_pin_desc sdm660_pins[] = { +PINCTRL_PIN (0 ,"GPIO_0" ), +PINCTRL_PIN (1 ,"GPIO_1" ), +PINCTRL_PIN (2 ,"GPIO_2" ), +PINCTRL_PIN (3 ,"GPIO_3" ), +PINCTRL_PIN (4 ,"GPIO_4" ), +PINCTRL_PIN (5 ,"GPIO_5" ), +PINCTRL_PIN (6 ,"GPIO_6" ), +PINCTRL_PIN (7 ,"GPIO_7" ), +PINCTRL_PIN (8 ,"GPIO_8" ), +PINCTRL_PIN (9 ,"GPIO_9" ), +PINCTRL_PIN (10 ,"GPIO_10" ), +PINCTRL_PIN (11 ,"GPIO_11" ), +PINCTRL_PIN (12 ,"GPIO_12" ), +PINCTRL_PIN (13 ,"GPIO_13" ), +PINCTRL_PIN (14 ,"GPIO_14" ), +PINCTRL_PIN (15 ,"GPIO_15" ), +PINCTRL_PIN (16 ,"GPIO_16" ), +PINCTRL_PIN (17 ,"GPIO_17" ), +PINCTRL_PIN (18 ,"GPIO_18" ), +PINCTRL_PIN (19 ,"GPIO_19" ), +PINCTRL_PIN (20 ,"GPIO_20" ), +PINCTRL_PIN (21 ,"GPIO_21" ), +PINCTRL_PIN (22 ,"GPIO_22" ), +PINCTRL_PIN (23 ,"GPIO_23" ), +PINCTRL_PIN (24 ,"GPIO_24" ), +PINCTRL_PIN (25 ,"GPIO_25" ), +PINCTRL_PIN (26 ,"GPIO_26" ), +PINCTRL_PIN (27 ,"GPIO_27" ), +PINCTRL_PIN (28 ,"GPIO_28" ), +PINCTRL_PIN (29 ,"GPIO_29" ), +PINCTRL_PIN (30 ,"GPIO_30" ), +PINCTRL_PIN (31 ,"GPIO_31" ), +PINCTRL_PIN (32 ,"GPIO_32" ), +PINCTRL_PIN (33 ,"GPIO_33" ), +PINCTRL_PIN (34 ,"GPIO_34" ), +PINCTRL_PIN (35 ,"GPIO_35" ), +PINCTRL_PIN (36 ,"GPIO_36" ), +PINCTRL_PIN (37 ,"GPIO_37" ), +PINCTRL_PIN (38 ,"GPIO_38" ), +PINCTRL_PIN (39 ,"GPIO_39" ), +PINCTRL_PIN (40 ,"GPIO_40" ), +PINCTRL_PIN (41 ,"GPIO_41" ), +PINCTRL_PIN (42 ,"GPIO_42" ), +PINCTRL_PIN (43 ,"GPIO_43" ), +PINCTRL_PIN (44 ,"GPIO_44" ), +PINCTRL_PIN (45 ,"GPIO_45" ), +PINCTRL_PIN (46 ,"GPIO_46" ), +PINCTRL_PIN (47 ,"GPIO_47" ), +PINCTRL_PIN (48 ,"GPIO_48" ), +PINCTRL_PIN (49 ,"GPIO_49" ), +PINCTRL_PIN (50 ,"GPIO_50" ), +PINCTRL_PIN (51 ,"GPIO_51" ), +PINCTRL_PIN (52 ,"GPIO_52" ), +PINCTRL_PIN (53 ,"GPIO_53" ), +PINCTRL_PIN (54 ,"GPIO_54" ), +PINCTRL_PIN (55 ,"GPIO_55" ), +PINCTRL_PIN (56 ,"GPIO_56" ), +PINCTRL_PIN (57 ,"GPIO_57" ), +PINCTRL_PIN (58 ,"GPIO_58" ), +PINCTRL_PIN (59 ,"GPIO_59" ), +PINCTRL_PIN (60 ,"GPIO_60" ), +PINCTRL_PIN (61 ,"GPIO_61" ), +PINCTRL_PIN (62 ,"GPIO_62" ), +PINCTRL_PIN (63 ,"GPIO_63" ), +PINCTRL_PIN (64 ,"GPIO_64" ), +PINCTRL_PIN (65 ,"GPIO_65" ), +PINCTRL_PIN (66 ,"GPIO_66" ), +PINCTRL_PIN (67 ,"GPIO_67" ), +PINCTRL_PIN (68 ,"GPIO_68" ), +PINCTRL_PIN (69 ,"GPIO_69" ), +PINCTRL_PIN (70 ,"GPIO_70" ), +PINCTRL_PIN (71 ,"GPIO_71" ), +PINCTRL_PIN (72 ,"GPIO_72" ), +PINCTRL_PIN (73 ,"GPIO_73" ), +PINCTRL_PIN (74 ,"GPIO_74" ), +PINCTRL_PIN (75 ,"GPIO_75" ), +PINCTRL_PIN (76 ,"GPIO_76" ), +PINCTRL_PIN (77 ,"GPIO_77" ), +PINCTRL_PIN (78 ,"GPIO_78" ), +PINCTRL_PIN (79 ,"GPIO_79" ), +PINCTRL_PIN (80 ,"GPIO_80" ), +PINCTRL_PIN (81 ,"GPIO_81" ), +PINCTRL_PIN (82 ,"GPIO_82" ), +PINCTRL_PIN (83 ,"GPIO_83" ), +PINCTRL_PIN (84 ,"GPIO_84" ), +PINCTRL_PIN (85 ,"GPIO_85" ), +PINCTRL_PIN (86 ,"GPIO_86" ), +PINCTRL_PIN (87 ,"GPIO_87" ), +PINCTRL_PIN (88 ,"GPIO_88" ), +PINCTRL_PIN (89 ,"GPIO_89" ), +PINCTRL_PIN (90 ,"GPIO_90" ), +PINCTRL_PIN (91 ,"GPIO_91" ), +PINCTRL_PIN (92 ,"GPIO_92" ), +PINCTRL_PIN (93 ,"GPIO_93" ), +PINCTRL_PIN (94 ,"GPIO_94" ), +PINCTRL_PIN (95 ,"GPIO_95" ), +PINCTRL_PIN (96 ,"GPIO_96" ), +PINCTRL_PIN (97 ,"GPIO_97" ), +PINCTRL_PIN (98 ,"GPIO_98" ), +PINCTRL_PIN (99 ,"GPIO_99" ), +PINCTRL_PIN (100 ,"GPIO_100" ), +PINCTRL_PIN (101 ,"GPIO_101" ), +PINCTRL_PIN (102 ,"GPIO_102" ), +PINCTRL_PIN (103 ,"GPIO_103" ), +PINCTRL_PIN (104 ,"GPIO_104" ), +PINCTRL_PIN (105 ,"GPIO_105" ), +PINCTRL_PIN (106 ,"GPIO_106" ), +PINCTRL_PIN (107 ,"GPIO_107" ), +PINCTRL_PIN (108 ,"GPIO_108" ), +PINCTRL_PIN (109 ,"GPIO_109" ), +PINCTRL_PIN (110 ,"GPIO_110" ), +PINCTRL_PIN (111 ,"GPIO_111" ), +PINCTRL_PIN (112 ,"GPIO_112" ), +PINCTRL_PIN (113 ,"GPIO_113" ), +PINCTRL_PIN (114 ,"SDC1_CLK" ), +PINCTRL_PIN (115 ,"SDC1_CMD" ), +PINCTRL_PIN (116 ,"SDC1_DATA" ), +PINCTRL_PIN (117 ,"SDC2_CLK" ), +PINCTRL_PIN (118 ,"SDC2_CMD" ), +PINCTRL_PIN (119 ,"SDC2_DATA" ), +PINCTRL_PIN (120 ,"SDC1_RCLK" ), +}; + +#define DECLARE_MSM_GPIO_PINS (pin) \ + static const unsigned int gpio##pin##_pins[] = { pin } +DECLARE_MSM_GPIO_PINS (0 ); +DECLARE_MSM_GPIO_PINS (1 ); +DECLARE_MSM_GPIO_PINS (2 ); +DECLARE_MSM_GPIO_PINS (3 ); +DECLARE_MSM_GPIO_PINS (4 ); +DECLARE_MSM_GPIO_PINS (5 ); +DECLARE_MSM_GPIO_PINS (6 ); +DECLARE_MSM_GPIO_PINS (7 ); +DECLARE_MSM_GPIO_PINS (8 ); +DECLARE_MSM_GPIO_PINS (9 ); +DECLARE_MSM_GPIO_PINS (10 ); +DECLARE_MSM_GPIO_PINS (11 ); +DECLARE_MSM_GPIO_PINS (12 ); +DECLARE_MSM_GPIO_PINS (13 ); +DECLARE_MSM_GPIO_PINS (14 ); +DECLARE_MSM_GPIO_PINS (15 ); +DECLARE_MSM_GPIO_PINS (16 ); +DECLARE_MSM_GPIO_PINS (17 ); +DECLARE_MSM_GPIO_PINS (18 ); +DECLARE_MSM_GPIO_PINS (19 ); +DECLARE_MSM_GPIO_PINS (20 ); +DECLARE_MSM_GPIO_PINS (21 ); +DECLARE_MSM_GPIO_PINS (22 ); +DECLARE_MSM_GPIO_PINS (23 ); +DECLARE_MSM_GPIO_PINS (24 ); +DECLARE_MSM_GPIO_PINS (25 ); +DECLARE_MSM_GPIO_PINS (26 ); +DECLARE_MSM_GPIO_PINS (27 ); +DECLARE_MSM_GPIO_PINS (28 ); +DECLARE_MSM_GPIO_PINS (29 ); +DECLARE_MSM_GPIO_PINS (30 ); +DECLARE_MSM_GPIO_PINS (31 ); +DECLARE_MSM_GPIO_PINS (32 ); +DECLARE_MSM_GPIO_PINS (33 ); +DECLARE_MSM_GPIO_PINS (34 ); +DECLARE_MSM_GPIO_PINS (35 ); +DECLARE_MSM_GPIO_PINS (36 ); +DECLARE_MSM_GPIO_PINS (37 ); +DECLARE_MSM_GPIO_PINS (38 ); +DECLARE_MSM_GPIO_PINS (39 ); +DECLARE_MSM_GPIO_PINS (40 ); +DECLARE_MSM_GPIO_PINS (41 ); +DECLARE_MSM_GPIO_PINS (42 ); +DECLARE_MSM_GPIO_PINS (43 ); +DECLARE_MSM_GPIO_PINS (44 ); +DECLARE_MSM_GPIO_PINS (45 ); +DECLARE_MSM_GPIO_PINS (46 ); +DECLARE_MSM_GPIO_PINS (47 ); +DECLARE_MSM_GPIO_PINS (48 ); +DECLARE_MSM_GPIO_PINS (49 ); +DECLARE_MSM_GPIO_PINS (50 ); +DECLARE_MSM_GPIO_PINS (51 ); +DECLARE_MSM_GPIO_PINS (52 ); +DECLARE_MSM_GPIO_PINS (53 ); +DECLARE_MSM_GPIO_PINS (54 ); +DECLARE_MSM_GPIO_PINS (55 ); +DECLARE_MSM_GPIO_PINS (56 ); +DECLARE_MSM_GPIO_PINS (57 ); +DECLARE_MSM_GPIO_PINS (58 ); +DECLARE_MSM_GPIO_PINS (59 ); +DECLARE_MSM_GPIO_PINS (60 ); +DECLARE_MSM_GPIO_PINS (61 ); +DECLARE_MSM_GPIO_PINS (62 ); +DECLARE_MSM_GPIO_PINS (63 ); +DECLARE_MSM_GPIO_PINS (64 ); +DECLARE_MSM_GPIO_PINS (65 ); +DECLARE_MSM_GPIO_PINS (66 ); +DECLARE_MSM_GPIO_PINS (67 ); +DECLARE_MSM_GPIO_PINS (68 ); +DECLARE_MSM_GPIO_PINS (69 ); +DECLARE_MSM_GPIO_PINS (70 ); +DECLARE_MSM_GPIO_PINS (71 ); +DECLARE_MSM_GPIO_PINS (72 ); +DECLARE_MSM_GPIO_PINS (73 ); +DECLARE_MSM_GPIO_PINS (74 ); +DECLARE_MSM_GPIO_PINS (75 ); +DECLARE_MSM_GPIO_PINS (76 ); +DECLARE_MSM_GPIO_PINS (77 ); +DECLARE_MSM_GPIO_PINS (78 ); +DECLARE_MSM_GPIO_PINS (79 ); +DECLARE_MSM_GPIO_PINS (80 ); +DECLARE_MSM_GPIO_PINS (81 ); +DECLARE_MSM_GPIO_PINS (82 ); +DECLARE_MSM_GPIO_PINS (83 ); +DECLARE_MSM_GPIO_PINS (84 ); +DECLARE_MSM_GPIO_PINS (85 ); +DECLARE_MSM_GPIO_PINS (86 ); +DECLARE_MSM_GPIO_PINS (87 ); +DECLARE_MSM_GPIO_PINS (88 ); +DECLARE_MSM_GPIO_PINS (89 ); +DECLARE_MSM_GPIO_PINS (90 ); +DECLARE_MSM_GPIO_PINS (91 ); +DECLARE_MSM_GPIO_PINS (92 ); +DECLARE_MSM_GPIO_PINS (93 ); +DECLARE_MSM_GPIO_PINS (94 ); +DECLARE_MSM_GPIO_PINS (95 ); +DECLARE_MSM_GPIO_PINS (96 ); +DECLARE_MSM_GPIO_PINS (97 ); +DECLARE_MSM_GPIO_PINS (98 ); +DECLARE_MSM_GPIO_PINS (99 ); +DECLARE_MSM_GPIO_PINS (100 ); +DECLARE_MSM_GPIO_PINS (101 ); +DECLARE_MSM_GPIO_PINS (102 ); +DECLARE_MSM_GPIO_PINS (103 ); +DECLARE_MSM_GPIO_PINS (104 ); +DECLARE_MSM_GPIO_PINS (105 ); +DECLARE_MSM_GPIO_PINS (106 ); +DECLARE_MSM_GPIO_PINS (107 ); +DECLARE_MSM_GPIO_PINS (108 ); +DECLARE_MSM_GPIO_PINS (109 ); +DECLARE_MSM_GPIO_PINS (110 ); +DECLARE_MSM_GPIO_PINS (111 ); +DECLARE_MSM_GPIO_PINS (112 ); +DECLARE_MSM_GPIO_PINS (113 ); + +static const unsigned int sdc1_clk_pins[] = {114 }; +static const unsigned int sdc1_cmd_pins[] = {115 }; +static const unsigned int sdc1_data_pins[] = {116 }; +static const unsigned int sdc2_clk_pins[] = {117 }; +static const unsigned int sdc2_cmd_pins[] = {118 }; +static const unsigned int sdc2_data_pins[] = {119 }; +static const unsigned int sdc1_rclk_pins[] = {120 }; + +enum sdm660_functions { + msm_mux_blsp_spi1, + msm_mux_gpio, + msm_mux_blsp_uim1, + msm_mux_tgu_ch0, + msm_mux_qdss_gpio4, + msm_mux_atest_gpsadc1, + msm_mux_blsp_uart1, + msm_mux_phase_flag14, + msm_mux_blsp_i2c2, + msm_mux_phase_flag31, + msm_mux_blsp_spi3, + msm_mux_blsp_spi3_cs1, + msm_mux_blsp_spi3_cs2, + msm_mux_wlan1_adc1, + msm_mux_atest_usb13, + msm_mux_tgu_ch1, + msm_mux_qdss_gpio5, + msm_mux_atest_gpsadc0, + msm_mux_blsp_i2c1, + msm_mux_ddr_bist, + msm_mux_atest_tsens2, + msm_mux_atest_usb1, + msm_mux_blsp_spi2, + msm_mux_blsp_uim2, + msm_mux_phase_flag3, + msm_mux_bimc_dte1, + msm_mux_wlan1_adc0, + msm_mux_atest_usb12, + msm_mux_bimc_dte0, + msm_mux_blsp_i2c3, + msm_mux_wlan2_adc1, + msm_mux_atest_usb11, + msm_mux_dbg_out, + msm_mux_wlan2_adc0, + msm_mux_atest_usb10, + msm_mux_blsp_spi4, + msm_mux_pri_mi2s, + msm_mux_phase_flag26, + msm_mux_qdss_cti0_a, + msm_mux_qdss_cti0_b, + msm_mux_qdss_cti1_a, + msm_mux_qdss_cti1_b, + msm_mux_pri_mi2s_ws, + msm_mux_phase_flag27, + msm_mux_blsp_i2c4, + msm_mux_phase_flag28, + msm_mux_blsp_uart5, + msm_mux_blsp_spi5, + msm_mux_blsp_uim5, + msm_mux_phase_flag5, + msm_mux_blsp_i2c5, + msm_mux_blsp_spi6, + msm_mux_blsp_uart2, + msm_mux_blsp_uim6, + msm_mux_phase_flag11, + msm_mux_vsense_data0, + msm_mux_blsp_i2c6, + msm_mux_phase_flag12, + msm_mux_vsense_data1, + msm_mux_phase_flag13, + msm_mux_vsense_mode, + msm_mux_blsp_spi7, + msm_mux_blsp_uart6_a, + msm_mux_blsp_uart6_b, + msm_mux_sec_mi2s, + msm_mux_sndwire_clk, + msm_mux_phase_flag17, + msm_mux_vsense_clkout, + msm_mux_sndwire_data, + msm_mux_phase_flag18, + msm_mux_blsp_i2c7, + msm_mux_phase_flag19, + msm_mux_vfr_1, + msm_mux_phase_flag20, + msm_mux_blsp_spi8_cs1, + msm_mux_blsp_spi8_cs2, + msm_mux_m_voc, + msm_mux_phase_flag21, + msm_mux_phase_flag22, + msm_mux_blsp_i2c8_a, + msm_mux_blsp_i2c8_b, + msm_mux_phase_flag23, + msm_mux_pwr_modem, + msm_mux_phase_flag24, + msm_mux_qdss_gpio, + msm_mux_cam_mclk, + msm_mux_pwr_nav, + msm_mux_qdss_gpio0, + msm_mux_qspi_data0, + msm_mux_pwr_crypto, + msm_mux_qdss_gpio1, + msm_mux_qspi_data1, + msm_mux_agera_pll, + msm_mux_qdss_gpio2, + msm_mux_qspi_data2, + msm_mux_jitter_bist, + msm_mux_qdss_gpio3, + msm_mux_qdss_gpio7, + msm_mux_mdss_vsync0, + msm_mux_mdss_vsync1, + msm_mux_mdss_vsync2, + msm_mux_mdss_vsync3, + msm_mux_qdss_gpio9, + msm_mux_atest_usb2, + msm_mux_cci_i2c, + msm_mux_pll_bypassnl, + msm_mux_atest_tsens, + msm_mux_atest_usb21, + msm_mux_pll_reset, + msm_mux_atest_usb23, + msm_mux_qdss_gpio6, + msm_mux_qspi_cs, + msm_mux_qdss_gpio10, + msm_mux_qdss_gpio11, + msm_mux_cci_async, + msm_mux_qdss_gpio12, + msm_mux_qdss_gpio13, + msm_mux_qspi_clk, + msm_mux_phase_flag30, + msm_mux_qdss_gpio14, + msm_mux_qspi_resetn, + msm_mux_phase_flag1, + msm_mux_qdss_gpio15, + msm_mux_phase_flag2, + msm_mux_phase_flag9, + msm_mux_qspi_data3, + msm_mux_phase_flag15, + msm_mux_qdss_gpio8, + msm_mux_phase_flag16, + msm_mux_phase_flag6, + msm_mux_phase_flag29, + msm_mux_phase_flag25, + msm_mux_phase_flag10, + msm_mux_atest_usb20, + msm_mux_gcc_gp1, + msm_mux_phase_flag4, + msm_mux_atest_usb22, + msm_mux_gcc_gp2, + msm_mux_atest_char, + msm_mux_mdp_vsync, + msm_mux_gcc_gp3, + msm_mux_atest_char3, + msm_mux_cri_trng0, + msm_mux_atest_char2, + msm_mux_cri_trng1, + msm_mux_atest_char1, + msm_mux_audio_ref, + msm_mux_cri_trng, + msm_mux_atest_char0, + msm_mux_blsp_spi8_a, + msm_mux_blsp_spi8_b, + msm_mux_sp_cmu, + msm_mux_nav_pps_a, + msm_mux_nav_pps_b, + msm_mux_nav_pps_c, + msm_mux_gps_tx_a, + msm_mux_gps_tx_b, + msm_mux_gps_tx_c, + msm_mux_adsp_ext, + msm_mux_ssc_irq, + msm_mux_isense_dbg, + msm_mux_phase_flag0, + msm_mux_phase_flag7, + msm_mux_phase_flag8, + msm_mux_tsense_pwm1, + msm_mux_tsense_pwm2, + msm_mux_mss_lte, + msm_mux_uim2_data, + msm_mux_uim2_clk, + msm_mux_uim2_reset, + msm_mux_uim2_present, + msm_mux_uim1_data, + msm_mux_uim1_clk, + msm_mux_uim1_reset, + msm_mux_uim1_present, + msm_mux_uim_batt, + msm_mux_pa_indicator,drivers/pinctrl/qcom/pinctrl-sdm660.c line 527
Quoted 10 lines
drivers/pinctrl/qcom/pinctrl-sdm660.c new file +10
-0+ msm_mux_ldo_en, + msm_mux_ldo_update, + msm_mux_qlink_request, + msm_mux_qlink_enable, + msm_mux_prng_rosc, + msm_mux__, +}; + +static const char *const gpio_groups[] = { + "gpio0", "gpio1", "gpio2", "gpio3", "gpio4", "gpio5", "gpio6","gpio7",
drivers/pinctrl/qcom/pinctrl-sdm660.c line 529
Quoted 2 lines
drivers/pinctrl/qcom/pinctrl-sdm660.c new file +2
-0+"gpio8" ,"gpio9" ,"gpio10" ,"gpio11" ,"gpio12" ,"gpio13" ,"gpio14" , + "gpio15", "gpio16", "gpio17", "gpio18", "gpio19", "gpio20","gpio21",
drivers/pinctrl/qcom/pinctrl-sdm660.c line 530
Quoted 1 line
drivers/pinctrl/qcom/pinctrl-sdm660.c new file +1
-0+ "gpio22", "gpio23", "gpio24", "gpio25", "gpio26", "gpio27","gpio28",
drivers/pinctrl/qcom/pinctrl-sdm660.c line 531
Quoted 1 line
drivers/pinctrl/qcom/pinctrl-sdm660.c new file +1
-0+ "gpio29", "gpio30", "gpio31", "gpio32", "gpio33", "gpio34","gpio35",
drivers/pinctrl/qcom/pinctrl-sdm660.c line 532
Quoted 1 line
drivers/pinctrl/qcom/pinctrl-sdm660.c new file +1
-0+ "gpio36", "gpio37", "gpio38", "gpio39", "gpio40", "gpio41","gpio42",
drivers/pinctrl/qcom/pinctrl-sdm660.c line 533
Quoted 1 line
drivers/pinctrl/qcom/pinctrl-sdm660.c new file +1
-0+ "gpio43", "gpio44", "gpio45", "gpio46", "gpio47", "gpio48","gpio49",
drivers/pinctrl/qcom/pinctrl-sdm660.c line 534
Quoted 1 line
drivers/pinctrl/qcom/pinctrl-sdm660.c new file +1
-0+ "gpio50", "gpio51", "gpio52", "gpio53", "gpio54", "gpio55","gpio56",
drivers/pinctrl/qcom/pinctrl-sdm660.c line 535
Quoted 1 line
drivers/pinctrl/qcom/pinctrl-sdm660.c new file +1
-0+ "gpio57", "gpio58", "gpio59", "gpio60", "gpio61", "gpio62","gpio63",
drivers/pinctrl/qcom/pinctrl-sdm660.c line 536
Quoted 1 line
drivers/pinctrl/qcom/pinctrl-sdm660.c new file +1
-0+ "gpio64", "gpio65", "gpio66", "gpio67", "gpio68", "gpio69","gpio70",
drivers/pinctrl/qcom/pinctrl-sdm660.c line 537
Quoted 1 line
drivers/pinctrl/qcom/pinctrl-sdm660.c new file +1
-0+ "gpio71", "gpio72", "gpio73", "gpio74", "gpio75", "gpio76","gpio77",
drivers/pinctrl/qcom/pinctrl-sdm660.c line 538
Quoted 1 line
drivers/pinctrl/qcom/pinctrl-sdm660.c new file +1
-0+ "gpio78", "gpio79", "gpio80", "gpio81", "gpio82", "gpio83","gpio84",
drivers/pinctrl/qcom/pinctrl-sdm660.c line 539
Quoted 1 line
drivers/pinctrl/qcom/pinctrl-sdm660.c new file +1
-0+ "gpio85", "gpio86", "gpio87", "gpio88", "gpio89", "gpio90","gpio91",
drivers/pinctrl/qcom/pinctrl-sdm660.c line 540
Quoted 1 line
drivers/pinctrl/qcom/pinctrl-sdm660.c new file +1
-0+ "gpio92", "gpio93", "gpio94", "gpio95", "gpio96", "gpio97","gpio98",
Quoted 164 lines
drivers/pinctrl/qcom/pinctrl-sdm660.c new file +164
-0+"gpio99" ,"gpio100" ,"gpio101" ,"gpio102" ,"gpio103" ,"gpio104" , +"gpio105" ,"gpio106" ,"gpio107" ,"gpio108" ,"gpio109" ,"gpio110" , + "gpio111", "gpio112", "gpio113", +}; +static const char *const blsp_spi1_groups[] = { +"gpio0" ,"gpio1" ,"gpio2" ,"gpio3" ,"gpio46" , +}; +static const char *const blsp_uim1_groups[] = { +"gpio0" ,"gpio1" , +}; +static const char *const tgu_ch0_groups[] = { +"gpio0" , +}; +static const char *const qdss_gpio4_groups[] = { +"gpio0" ,"gpio36" , +}; +static const char *const atest_gpsadc1_groups[] = { +"gpio0" , +}; +static const char *const blsp_uart1_groups[] = { +"gpio0" ,"gpio1" ,"gpio2" ,"gpio3" , +}; +static const char *const phase_flag14_groups[] = { +"gpio5" , +}; +static const char *const blsp_i2c2_groups[] = { +"gpio6" ,"gpio7" , +}; +static const char *const phase_flag31_groups[] = { +"gpio6" , +}; +static const char *const blsp_spi3_groups[] = { +"gpio8" ,"gpio9" ,"gpio10" ,"gpio11" , +}; +static const char *const blsp_spi3_cs1_groups[] = { +"gpio30" , +}; +static const char *const blsp_spi3_cs2_groups[] = { +"gpio65" , +}; +static const char *const wlan1_adc1_groups[] = { +"gpio8" , +}; +static const char *const atest_usb13_groups[] = { +"gpio8" , +}; +static const char *const tgu_ch1_groups[] = { +"gpio1" , +}; +static const char *const qdss_gpio5_groups[] = { +"gpio1" ,"gpio37" , +}; +static const char *const atest_gpsadc0_groups[] = { +"gpio1" , +}; +static const char *const blsp_i2c1_groups[] = { +"gpio2" ,"gpio3" , +}; +static const char *const ddr_bist_groups[] = { +"gpio3" ,"gpio8" ,"gpio9" ,"gpio10" , +}; +static const char *const atest_tsens2_groups[] = { +"gpio3" , +}; +static const char *const atest_usb1_groups[] = { +"gpio3" , +}; +static const char *const blsp_spi2_groups[] = { +"gpio4" ,"gpio5" ,"gpio6" ,"gpio7" , +}; +static const char *const blsp_uim2_groups[] = { +"gpio4" ,"gpio5" , +}; +static const char *const phase_flag3_groups[] = { +"gpio4" , +}; +static const char *const bimc_dte1_groups[] = { +"gpio8" ,"gpio10" , +}; +static const char *const wlan1_adc0_groups[] = { +"gpio9" , +}; +static const char *const atest_usb12_groups[] = { +"gpio9" , +}; +static const char *const bimc_dte0_groups[] = { +"gpio9" ,"gpio11" , +}; +static const char *const blsp_i2c3_groups[] = { +"gpio10" ,"gpio11" , +}; +static const char *const wlan2_adc1_groups[] = { +"gpio10" , +}; +static const char *const atest_usb11_groups[] = { +"gpio10" , +}; +static const char *const dbg_out_groups[] = { +"gpio11" , +}; +static const char *const wlan2_adc0_groups[] = { +"gpio11" , +}; +static const char *const atest_usb10_groups[] = { +"gpio11" , +}; +static const char *const RCM_MARKER_groups[] = { +"gpio12" ,"gpio13" , +}; +static const char *const blsp_spi4_groups[] = { +"gpio12" ,"gpio13" ,"gpio14" ,"gpio15" , +}; +static const char *const pri_mi2s_groups[] = { +"gpio12" ,"gpio14" ,"gpio15" ,"gpio61" , +}; +static const char *const phase_flag26_groups[] = { +"gpio12" , +}; +static const char *const qdss_cti0_a_groups[] = { +"gpio49" ,"gpio50" , +}; +static const char *const qdss_cti0_b_groups[] = { +"gpio13" ,"gpio21" , +}; +static const char *const qdss_cti1_a_groups[] = { +"gpio53" ,"gpio55" , +}; +static const char *const qdss_cti1_b_groups[] = { +"gpio12" ,"gpio66" , +}; +static const char *const pri_mi2s_ws_groups[] = { +"gpio13" , +}; +static const char *const phase_flag27_groups[] = { +"gpio13" , +}; +static const char *const blsp_i2c4_groups[] = { +"gpio14" ,"gpio15" , +}; +static const char *const phase_flag28_groups[] = { +"gpio14" , +}; +static const char *const blsp_uart5_groups[] = { +"gpio16" ,"gpio17" ,"gpio18" ,"gpio19" , +}; +static const char *const blsp_spi5_groups[] = { +"gpio16" ,"gpio17" ,"gpio18" ,"gpio19" , +}; +static const char *const blsp_uim5_groups[] = { +"gpio16" ,"gpio17" , +}; +static const char *const phase_flag5_groups[] = { +"gpio17" , +}; +static const char *const blsp_i2c5_groups[] = { +"gpio18" ,"gpio19" , +}; +static const char *const blsp_spi6_groups[] = { +"gpio49" ,"gpio52" ,"gpio22" ,"gpio23" , +}; +static const char *const blsp_uart2_groups[] = { +"gpio4" ,"gpio5" ,"gpio6" ,"gpio7" , +}; +static const char *const blsp_uim6_groups[]
Signature · 1 line
Sent from my Android device with K-9 Mail. Please excuse my brevity.
Quoted 13 lines · Michal Vokáč
Hi Craig,
Quoted 6 lines · Craig Tatlor
Add initial pinctrl driver to support pin configuration with pinctrl framework for sdm660.
Based off CAF implementation.Signed-off-by Craig Tatlor <[email protected]>---
The documentation portion should be a separate patch. Please refer to
Documentation/devicetree/bindings/submitting-patches.txt
Quoted 6 lines
It is easier for DT maintainers to review just the relevant part. The binding patches are also rebased to a separate tree as they are not Linux specific and can be re-used in other OSes
Best regards,
Michal
I know, just did this because it is basically exactly same as other qcom pinctrl docs and they also only had one patch.
Sorry if you got this multiple times, apparently my email client adds HTML to non inline replies
Quoted 1,028 lines
Quoted 9 lines
Changes from v1:
Adds gpio-ranges property to bindings.../bindings/pinctrl/qcom,sdm660-pinctrl.txt | 202 +++ drivers/pinctrl/qcom/Kconfig | 10 + drivers/pinctrl/qcom/Makefile | 1 + drivers/pinctrl/qcom/pinctrl-sdm660.c | 1451+++++++++++++++++
Quoted 2 lines
4 files changed, 1663 insertions(+)create mode 100644
Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txtQuoted 3 lines
create mode 100644
drivers/pinctrl/qcom/pinctrl-sdm660.cdiff --git
a/Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txtb/Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txtQuoted 4 lines
new file mode 100644
index 000000000000..801960ad2112
---/dev/null
+++
b/Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txtDocumentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt line 3
Quoted 4 lines
Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt new file +3
-0@@ -0,0 +1,202 @@ +Qualcomm Technologies, Inc. SDM660 TLMM block + +This binding describes the Top Level Mode Multiplexer block found inthe
Quoted 16 lines
Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt new file +16
-0+SDM660 platform. + +- compatible: + Usage: required + Value type: <string> + Definition: must be "qcom,sdm660-pinctrl" + +- reg: + Usage: required + Value type: <prop-encoded-array> + Definition: the base address and size of the TLMM register space. + +- interrupts: + Usage: required + Value type: <prop-encoded-array> + Definition: should specify the TLMM summary IRQ.Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt
Quoted 10 lines
Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt new file +10
-0+ +- interrupt-controller: + Usage: required + Value type: <none> + Definition: identifies this node as an interrupt controller + +- #interrupt-cells: + Usage: required + Value type: <u32> + Definition: must be 2. Specifying the pin number and flags, asdefined
Quoted 7 lines
Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt new file +7
-0+ in <dt-bindings/interrupt-controller/irq.h> + +- gpio-controller: + Usage: required + Value type: <none> + Definition: identifies this node as a gpio controller +Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt
Quoted 10 lines
Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt new file +10
-0+- gpio-ranges: + Usage: required + Value type: <prop-encoded-array> + Definition: Specifies the mapping between gpio controller and + pin-controller pins. + +- #gpio-cells: + Usage: required + Value type: <u32> + Definition: must be 2. Specifying the pin number and flags, asdefined
Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt
Quoted 3 lines
Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt new file +3
-0+ in <dt-bindings/gpio/gpio.h> + +Please refer to ../gpio/gpio.txt and
../interrupt-controller/interrupts.txtforDocumentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt
Quoted 3 lines
Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt new file +3
-0+a general description of GPIO and interrupt bindings. + +Please refer to pinctrl-bindings.txt in this directory for detailsof the
Review line 53
Quoted 1 line
(quoted diff) +1
-0+common pinctrl bindings used by client devices, including themeaning of the
Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt
Quoted 3 lines
Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt new file +3
-0+phrase "pin configuration node". + +The pin configuration nodes act as a container for an arbitrarynumber of
Review line 57
Quoted 1 line
(quoted diff) +1
-0+subnodes. Each of these subnodes represents some desiredconfiguration for a
Review line 58
Quoted 1 line
(quoted diff) +1
-0+pin, a group, or a list of pins or groups. This configuration caninclude the
Review line 59
Quoted 1 line
(quoted diff) +1
-0+mux function to select on those pin(s)/group(s), and various pinconfiguration
Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt
Quoted 6 lines
Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt new file +6
-0+parameters, such as pull-up, drive strength, etc. + + +PIN CONFIGURATION NODES: + +The name of each subnode is not important; all subnodes should beenumerated
Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt
Quoted 3 lines
Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt new file +3
-0+and processed purely based on their content. + +Each subnode only affects those parameters that are explicitlylisted. In
Review line 69
Quoted 1 line
(quoted diff) +1
-0+other words, a subnode that lists a mux function but no pinconfiguration
Review line 70
Quoted 1 line
(quoted diff) +1
-0+parameters implies no information about any pin configurationparameters.
Review line 71
Quoted 1 line
(quoted diff) +1
-0+Similarly, a pin subnode that describes a pullup parameter impliesno
Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt
Quoted 4 lines
Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt new file +4
-0+information about e.g. the mux function. + + +The following generic properties as defined in pinctrl-bindings.txtare valid
Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt
Quoted 6 lines
Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt new file +6
-0+to specify in a pin configuration subnode: + +- pins: + Usage: required + Value type: <string-array> + Definition: List of gpio pins affected by the properties specifiedin
Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt
Quoted 4 lines
Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt new file +4
-0+ this subnode. Valid pins are: + gpio0-gpio113, + Supports mux, bias and drive-strength + sdc1_clk, sdc1_cmd, sdc1_data sdc2_clk, sdc2_cmd, sdc2_data
sdc1_rclk,Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt
Quoted 6 lines
Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt new file +6
-0+ Supports bias and drive-strength + +- function: + Usage: required + Value type: <string> + Definition: Specify the alternative function to be configured forthe
Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt
Quoted 6 lines
Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt new file +6
-0+ specified pins. Functions are only valid for gpio pins. + Valid values are: + + blsp_uart1, blsp_spi1, blsp_i2c1, blsp_uim1, atest_tsens, + bimc_dte1, dac_calib0, blsp_spi8, blsp_uart8, blsp_uim8, + qdss_cti_trig_out_b, bimc_dte0, dac_calib1,
qdss_cti_trig_in_b,Review line 99
Quoted 2 lines
(quoted diff) +2
-0+ dac_calib2, atest_tsens2, atest_usb1, blsp_spi10, blsp_uart10, + blsp_uim10, atest_bbrx1, atest_usb13, atest_bbrx0,
atest_usb12,Review line 101
Quoted 2 lines
(quoted diff) +2
-0+ mdp_vsync, edp_lcd, blsp_i2c10, atest_gpsadc1, atest_usb11, + atest_gpsadc0, edp_hot, atest_usb10, m_voc, dac_gpio,
atest_char,Review line 102
Quoted 1 line
(quoted diff) +1
-0+ cam_mclk, pll_bypassnl, qdss_stm7, blsp_i2c8,
qdss_tracedata_b,Review line 103
Quoted 1 line
(quoted diff) +1
-0+ pll_reset, qdss_stm6, qdss_stm5, qdss_stm4, atest_usb2,
cci_i2c,Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt
Quoted 5 lines
Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt new file +5
-0+ qdss_stm3, dac_calib3, atest_usb23, atest_char3, dac_calib4, + qdss_stm2, atest_usb22, atest_char2, qdss_stm1, dac_calib5, + atest_usb21, atest_char1, dbg_out, qdss_stm0, dac_calib6, + atest_usb20, atest_char0, dac_calib10, qdss_stm10, + qdss_cti_trig_in_a, cci_timer4, blsp_spi6, blsp_uart6,
blsp_uim6,Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt
Quoted 9 lines
Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt new file +9
-0+ blsp2_spi, qdss_stm9, qdss_cti_trig_out_a, dac_calib11, + qdss_stm8, cci_timer0, qdss_stm13, dac_calib7, cci_timer1, + qdss_stm12, dac_calib8, cci_timer2, blsp1_spi, qdss_stm11, + dac_calib9, cci_timer3, cci_async, dac_calib12, blsp_i2c6, + qdss_tracectl_a, dac_calib13, qdss_traceclk_a, dac_calib14, + dac_calib15, hdmi_rcv, dac_calib16, hdmi_cec, pwr_modem, + dac_calib17, hdmi_ddc, pwr_nav, dac_calib18, pwr_crypto, + dac_calib19, hdmi_hot, dac_calib20, dac_calib21, pci_e0, + dac_calib22, dac_calib23, dac_calib24, tsif1_sync,
dac_calib25,Review line 119
Quoted 2 lines
(quoted diff) +2
-0+ sd_write, tsif1_error, blsp_spi2, blsp_uart2, blsp_uim2, + qdss_cti, blsp_i2c2, blsp_spi3, blsp_uart3, blsp_uim3,
blsp_i2c3,Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt
Quoted 3 lines
Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt new file +3
-0+ uim3, blsp_spi9, blsp_uart9, blsp_uim9, blsp10_spi, blsp_i2c9, + blsp_spi7, blsp_uart7, blsp_uim7, qdss_tracedata_a, blsp_i2c7, + qua_mi2s, gcc_gp1_clk_a, ssc_irq, uim4, blsp_spi11,
blsp_uart11,Review line 123
Quoted 1 line
(quoted diff) +1
-0+ blsp_uim11, gcc_gp2_clk_a, gcc_gp3_clk_a, blsp_i2c11,
cri_trng0,Review line 124
Quoted 1 line
(quoted diff) +1
-0+ cri_trng1, cri_trng, qdss_stm18, pri_mi2s, qdss_stm17,
blsp_spi4,Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt
Quoted 8 lines
Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt new file +8
-0+ blsp_uart4, blsp_uim4, qdss_stm16, qdss_stm15, blsp_i2c4, + qdss_stm14, dac_calib26, spkr_i2s, audio_ref, lpass_slimbus, + isense_dbg, tsense_pwm1, tsense_pwm2, btfm_slimbus, ter_mi2s, + qdss_stm22, qdss_stm21, qdss_stm20, qdss_stm19, gcc_gp1_clk_b, + sec_mi2s, blsp_spi5, blsp_uart5, blsp_uim5, gcc_gp2_clk_b, + gcc_gp3_clk_b, blsp_i2c5, blsp_spi12, blsp_uart12, blsp_uim12, + qdss_stm25, qdss_stm31, blsp_i2c12, qdss_stm30, qdss_stm29, + tsif1_clk, qdss_stm28, tsif1_en, tsif1_data, sdc4_cmd,
qdss_stm27,Review line 133
Quoted 1 line
(quoted diff) +1
-0+ qdss_traceclk_b, tsif2_error, sdc43, vfr_1, qdss_stm26,
tsif2_clk,Review line 134
Quoted 1 line
(quoted diff) +1
-0+ sdc4_clk, qdss_stm24, tsif2_en, sdc42, qdss_stm23,
qdss_tracectl_b,Review line 136
Quoted 2 lines
(quoted diff) +2
-0+ sd_card, tsif2_data, sdc41, tsif2_sync, sdc40, mdp_vsync_p_b, + ldo_en, mdp_vsync_s_b, ldo_update, blsp11_uart_tx_b,
blsp11_uart_rx_b,Review line 137
Quoted 1 line
(quoted diff) +1
-0+ blsp11_i2c_sda_b, prng_rosc, blsp11_i2c_scl_b, uim2, uim1,
uim_batt,Review line 139
Quoted 2 lines
(quoted diff) +2
-0+ pci_e2, pa_indicator, adsp_ext, ddr_bist, qdss_tracedata_11, + qdss_tracedata_12, modem_tsync, nav_dr, nav_pps, pci_e1,
gsm_tx,Review line 140
Quoted 1 line
(quoted diff) +1
-0+ qspi_cs, ssbi2, ssbi1, mss_lte, qspi_clk, qspi0, qspi1, qspi2,qspi3,
Quoted 11 lines
Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt new file +11
-0+ gpio + +- bias-disable: + Usage: optional + Value type: <none> + Definition: The specified pins should be configued as no pull. + +- bias-pull-down: + Usage: optional + Value type: <none> + Definition: The specified pins should be configued as pull down.Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt
Quoted 10 lines
Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt new file +10
-0+ +- bias-pull-up: + Usage: optional + Value type: <none> + Definition: The specified pins should be configued as pull up. + +- output-high: + Usage: optional + Value type: <none> + Definition: The specified pins are configured in output mode,driven
Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt
Quoted 7 lines
Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt new file +7
-0+ high. + Not valid for sdc pins. + +- output-low: + Usage: optional + Value type: <none> + Definition: The specified pins are configured in output mode,driven
Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt
Quoted 7 lines
Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt new file +7
-0+ low. + Not valid for sdc pins. + +- drive-strength: + Usage: optional + Value type: <u32> + Definition: Selects the drive strength for the specified pins, inmA.
Review
Quoted 28 lines
Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt new file +27
-0+ Valid values are: 2, 4, 6, 8, 10, 12, 14 and 16 + +Example: + + tlmm: pinctrl@1010000 { + compatible = "qcom,sdm660-pinctrl"; + reg = <0x1010000 0x300000>; + interrupts = <0 208 0>; + gpio-controller; + gpio-ranges = <&tlmm 0 0 114>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + + uart_console_active: uart_console_active { + mux { + pins = "gpio4", "gpio5"; + function = "blsp_uart8"; + }; + + config { + pins = "gpio4", "gpio5"; + drive-strength = <2>; + bias-disable; + }; + }; + };(quoted diff) +0
-0b/drivers/pinctrl/qcom/Kconfig
drivers/pinctrl/qcom/Kconfig config PINCTRL_QCOM_SSBI_PMIC · line 147
Quoted 5 lines
index 195492033075..091beadb8a1c 100644
drivers/pinctrl/qcom/Kconfig +0
-0@@ -147,6 +147,16 @@ config PINCTRL_QCOM_SSBI_PMIC which are using SSBI for communication with SoC. ExamplePMIC's
drivers/pinctrl/qcom/Kconfig config PINCTRL_QCOM_SSBI_PMIC
Quoted 4 lines
drivers/pinctrl/qcom/Kconfig +2
-0devices are pm8058 and pm8921. +config PINCTRL_SDM660 + tristate "Qualcomm Technologies Inc SDM660 pin controllerdriver"
drivers/pinctrl/qcom/Kconfig config PINCTRL_QCOM_SSBI_PMIC
Quoted 4 lines
drivers/pinctrl/qcom/Kconfig +4
-0+ depends on GPIOLIB && OF + select PINCTRL_MSM + help + This is the pinctrl, pinmux, pinconf and gpiolib driver forthe
drivers/pinctrl/qcom/Kconfig config PINCTRL_QCOM_SSBI_PMIC
Quoted 6 lines
drivers/pinctrl/qcom/Kconfig +4
-0+ Qualcomm Technologies Inc TLMM block found on the Qualcomm + Technologies Inc SDM660 platform. + + config PINCTRL_SDM845 tristate "Qualcomm Technologies Inc SDM845 pin controllerdriver"
Review
Quoted 2 lines
drivers/pinctrl/qcom/Kconfig +0
-0depends on GPIOLIB && OF(quoted diff) +0
-0b/drivers/pinctrl/qcom/Makefile
drivers/pinctrl/qcom/Makefile obj-$(CONFIG_PINCTRL_QCOM_SPMI_PMIC) +=
Quoted 4 lines
index
0c6f3ddc296d..9b08808a2f1c100644drivers/pinctrl/qcom/Makefile +0
-0@@ -19,4 +19,5 @@ obj-$(CONFIG_PINCTRL_QCOM_SPMI_PMIC) +=pinctrl-spmi-gpio.o
Review
Quoted 6 lines
drivers/pinctrl/qcom/Makefile +1
-0obj-$(CONFIG_PINCTRL_QCOM_SPMI_PMIC) += pinctrl-spmi-mpp.o obj-$(CONFIG_PINCTRL_QCOM_SSBI_PMIC) += pinctrl-ssbi-gpio.o obj-$(CONFIG_PINCTRL_QCOM_SSBI_PMIC) += pinctrl-ssbi-mpp.o +obj-$(CONFIG_PINCTRL_SDM660) += pinctrl-sdm660.o obj-$(CONFIG_PINCTRL_SDM845) += pinctrl-sdm845.o(quoted diff) +0
-0
b/drivers/pinctrl/qcom/pinctrl-sdm660.cQuoted 522 lines
new file mode 100644
index 000000000000..ded56111f168drivers/pinctrl/qcom/pinctrl-sdm660.c new file +517
-0@@ -0,0 +1,1451 @@ +// SPDX-License-Identifier: GPL-2.0 +/* +* Copyright (c) 2016, The Linux Foundation. All rights reserved. +* Copyright (c) 2018, Craig Tatlor. +*/ + +#include <linux/module.h> +#include <linux/of.h> +#include <linux/platform_device.h> +#include <linux/pinctrl/pinctrl.h> + +#include "pinctrl-msm.h" + +#define NORTH 0x00900000 +#define CENTER 0x00500000 +#define SOUTH 0x00100000 +#define REG_SIZE 0x1000 + +#define FUNCTION (fname) \ + [msm_mux_##fname] = { \ + .name = #fname, \ + .groups = fname##_groups, \ + .ngroups = ARRAY_SIZE(fname##_groups), \ + } + + +#define PINGROUP(id, base, f1, f2, f3, f4, f5, f6, f7, f8, f9) \ + { \ + .name = "gpio" #id, \ + .pins = gpio##id##_pins, \ + .npins = (unsigned)ARRAY_SIZE(gpio##id##_pins), \ + .funcs = (int[]){ \ + msm_mux_gpio, /* gpio mode */ \ + msm_mux_##f1, \ + msm_mux_##f2, \ + msm_mux_##f3, \ + msm_mux_##f4, \ + msm_mux_##f5, \ + msm_mux_##f6, \ + msm_mux_##f7, \ + msm_mux_##f8, \ + msm_mux_##f9 \ + }, \ + .nfuncs = 10, \ + .ctl_reg = base + REG_SIZE * id, \ + .io_reg = base + 0x4 + REG_SIZE * id, \ + .intr_cfg_reg = base + 0x8 + REG_SIZE * id, \ + .intr_status_reg = base + 0xc + REG_SIZE * id, \ + .intr_target_reg = base + 0x8 + REG_SIZE * id, \ + .mux_bit = 2, \ + .pull_bit = 0, \ + .drv_bit = 6, \ + .oe_bit = 9, \ + .in_bit = 0, \ + .out_bit = 1, \ + .intr_enable_bit = 0, \ + .intr_status_bit = 0, \ + .intr_target_bit = 5, \ + .intr_target_kpss_val = 3, \ + .intr_raw_status_bit = 4, \ + .intr_polarity_bit = 1, \ + .intr_detection_bit = 2, \ + .intr_detection_width = 2, \ + } + +#define SDC_QDSD_PINGROUP (pg_name, ctl, pull, drv) \ + { \ + .name = #pg_name, \ + .pins = pg_name##_pins, \ + .npins = (unsigned)ARRAY_SIZE(pg_name##_pins), \ + .ctl_reg = ctl, \ + .io_reg = 0, \ + .intr_cfg_reg = 0, \ + .intr_status_reg = 0, \ + .intr_target_reg = 0, \ + .mux_bit = -1, \ + .pull_bit = pull, \ + .drv_bit = drv, \ + .oe_bit = -1, \ + .in_bit = -1, \ + .out_bit = -1, \ + .intr_enable_bit = -1, \ + .intr_status_bit = -1, \ + .intr_target_bit = -1, \ + .intr_raw_status_bit = -1, \ + .intr_polarity_bit = -1, \ + .intr_detection_bit = -1, \ + .intr_detection_width = -1, \ + } + +static const struct pinctrl_pin_desc sdm660_pins[] = { +PINCTRL_PIN (0 ,"GPIO_0" ), +PINCTRL_PIN (1 ,"GPIO_1" ), +PINCTRL_PIN (2 ,"GPIO_2" ), +PINCTRL_PIN (3 ,"GPIO_3" ), +PINCTRL_PIN (4 ,"GPIO_4" ), +PINCTRL_PIN (5 ,"GPIO_5" ), +PINCTRL_PIN (6 ,"GPIO_6" ), +PINCTRL_PIN (7 ,"GPIO_7" ), +PINCTRL_PIN (8 ,"GPIO_8" ), +PINCTRL_PIN (9 ,"GPIO_9" ), +PINCTRL_PIN (10 ,"GPIO_10" ), +PINCTRL_PIN (11 ,"GPIO_11" ), +PINCTRL_PIN (12 ,"GPIO_12" ), +PINCTRL_PIN (13 ,"GPIO_13" ), +PINCTRL_PIN (14 ,"GPIO_14" ), +PINCTRL_PIN (15 ,"GPIO_15" ), +PINCTRL_PIN (16 ,"GPIO_16" ), +PINCTRL_PIN (17 ,"GPIO_17" ), +PINCTRL_PIN (18 ,"GPIO_18" ), +PINCTRL_PIN (19 ,"GPIO_19" ), +PINCTRL_PIN (20 ,"GPIO_20" ), +PINCTRL_PIN (21 ,"GPIO_21" ), +PINCTRL_PIN (22 ,"GPIO_22" ), +PINCTRL_PIN (23 ,"GPIO_23" ), +PINCTRL_PIN (24 ,"GPIO_24" ), +PINCTRL_PIN (25 ,"GPIO_25" ), +PINCTRL_PIN (26 ,"GPIO_26" ), +PINCTRL_PIN (27 ,"GPIO_27" ), +PINCTRL_PIN (28 ,"GPIO_28" ), +PINCTRL_PIN (29 ,"GPIO_29" ), +PINCTRL_PIN (30 ,"GPIO_30" ), +PINCTRL_PIN (31 ,"GPIO_31" ), +PINCTRL_PIN (32 ,"GPIO_32" ), +PINCTRL_PIN (33 ,"GPIO_33" ), +PINCTRL_PIN (34 ,"GPIO_34" ), +PINCTRL_PIN (35 ,"GPIO_35" ), +PINCTRL_PIN (36 ,"GPIO_36" ), +PINCTRL_PIN (37 ,"GPIO_37" ), +PINCTRL_PIN (38 ,"GPIO_38" ), +PINCTRL_PIN (39 ,"GPIO_39" ), +PINCTRL_PIN (40 ,"GPIO_40" ), +PINCTRL_PIN (41 ,"GPIO_41" ), +PINCTRL_PIN (42 ,"GPIO_42" ), +PINCTRL_PIN (43 ,"GPIO_43" ), +PINCTRL_PIN (44 ,"GPIO_44" ), +PINCTRL_PIN (45 ,"GPIO_45" ), +PINCTRL_PIN (46 ,"GPIO_46" ), +PINCTRL_PIN (47 ,"GPIO_47" ), +PINCTRL_PIN (48 ,"GPIO_48" ), +PINCTRL_PIN (49 ,"GPIO_49" ), +PINCTRL_PIN (50 ,"GPIO_50" ), +PINCTRL_PIN (51 ,"GPIO_51" ), +PINCTRL_PIN (52 ,"GPIO_52" ), +PINCTRL_PIN (53 ,"GPIO_53" ), +PINCTRL_PIN (54 ,"GPIO_54" ), +PINCTRL_PIN (55 ,"GPIO_55" ), +PINCTRL_PIN (56 ,"GPIO_56" ), +PINCTRL_PIN (57 ,"GPIO_57" ), +PINCTRL_PIN (58 ,"GPIO_58" ), +PINCTRL_PIN (59 ,"GPIO_59" ), +PINCTRL_PIN (60 ,"GPIO_60" ), +PINCTRL_PIN (61 ,"GPIO_61" ), +PINCTRL_PIN (62 ,"GPIO_62" ), +PINCTRL_PIN (63 ,"GPIO_63" ), +PINCTRL_PIN (64 ,"GPIO_64" ), +PINCTRL_PIN (65 ,"GPIO_65" ), +PINCTRL_PIN (66 ,"GPIO_66" ), +PINCTRL_PIN (67 ,"GPIO_67" ), +PINCTRL_PIN (68 ,"GPIO_68" ), +PINCTRL_PIN (69 ,"GPIO_69" ), +PINCTRL_PIN (70 ,"GPIO_70" ), +PINCTRL_PIN (71 ,"GPIO_71" ), +PINCTRL_PIN (72 ,"GPIO_72" ), +PINCTRL_PIN (73 ,"GPIO_73" ), +PINCTRL_PIN (74 ,"GPIO_74" ), +PINCTRL_PIN (75 ,"GPIO_75" ), +PINCTRL_PIN (76 ,"GPIO_76" ), +PINCTRL_PIN (77 ,"GPIO_77" ), +PINCTRL_PIN (78 ,"GPIO_78" ), +PINCTRL_PIN (79 ,"GPIO_79" ), +PINCTRL_PIN (80 ,"GPIO_80" ), +PINCTRL_PIN (81 ,"GPIO_81" ), +PINCTRL_PIN (82 ,"GPIO_82" ), +PINCTRL_PIN (83 ,"GPIO_83" ), +PINCTRL_PIN (84 ,"GPIO_84" ), +PINCTRL_PIN (85 ,"GPIO_85" ), +PINCTRL_PIN (86 ,"GPIO_86" ), +PINCTRL_PIN (87 ,"GPIO_87" ), +PINCTRL_PIN (88 ,"GPIO_88" ), +PINCTRL_PIN (89 ,"GPIO_89" ), +PINCTRL_PIN (90 ,"GPIO_90" ), +PINCTRL_PIN (91 ,"GPIO_91" ), +PINCTRL_PIN (92 ,"GPIO_92" ), +PINCTRL_PIN (93 ,"GPIO_93" ), +PINCTRL_PIN (94 ,"GPIO_94" ), +PINCTRL_PIN (95 ,"GPIO_95" ), +PINCTRL_PIN (96 ,"GPIO_96" ), +PINCTRL_PIN (97 ,"GPIO_97" ), +PINCTRL_PIN (98 ,"GPIO_98" ), +PINCTRL_PIN (99 ,"GPIO_99" ), +PINCTRL_PIN (100 ,"GPIO_100" ), +PINCTRL_PIN (101 ,"GPIO_101" ), +PINCTRL_PIN (102 ,"GPIO_102" ), +PINCTRL_PIN (103 ,"GPIO_103" ), +PINCTRL_PIN (104 ,"GPIO_104" ), +PINCTRL_PIN (105 ,"GPIO_105" ), +PINCTRL_PIN (106 ,"GPIO_106" ), +PINCTRL_PIN (107 ,"GPIO_107" ), +PINCTRL_PIN (108 ,"GPIO_108" ), +PINCTRL_PIN (109 ,"GPIO_109" ), +PINCTRL_PIN (110 ,"GPIO_110" ), +PINCTRL_PIN (111 ,"GPIO_111" ), +PINCTRL_PIN (112 ,"GPIO_112" ), +PINCTRL_PIN (113 ,"GPIO_113" ), +PINCTRL_PIN (114 ,"SDC1_CLK" ), +PINCTRL_PIN (115 ,"SDC1_CMD" ), +PINCTRL_PIN (116 ,"SDC1_DATA" ), +PINCTRL_PIN (117 ,"SDC2_CLK" ), +PINCTRL_PIN (118 ,"SDC2_CMD" ), +PINCTRL_PIN (119 ,"SDC2_DATA" ), +PINCTRL_PIN (120 ,"SDC1_RCLK" ), +}; + +#define DECLARE_MSM_GPIO_PINS (pin) \ + static const unsigned int gpio##pin##_pins[] = { pin } +DECLARE_MSM_GPIO_PINS (0 ); +DECLARE_MSM_GPIO_PINS (1 ); +DECLARE_MSM_GPIO_PINS (2 ); +DECLARE_MSM_GPIO_PINS (3 ); +DECLARE_MSM_GPIO_PINS (4 ); +DECLARE_MSM_GPIO_PINS (5 ); +DECLARE_MSM_GPIO_PINS (6 ); +DECLARE_MSM_GPIO_PINS (7 ); +DECLARE_MSM_GPIO_PINS (8 ); +DECLARE_MSM_GPIO_PINS (9 ); +DECLARE_MSM_GPIO_PINS (10 ); +DECLARE_MSM_GPIO_PINS (11 ); +DECLARE_MSM_GPIO_PINS (12 ); +DECLARE_MSM_GPIO_PINS (13 ); +DECLARE_MSM_GPIO_PINS (14 ); +DECLARE_MSM_GPIO_PINS (15 ); +DECLARE_MSM_GPIO_PINS (16 ); +DECLARE_MSM_GPIO_PINS (17 ); +DECLARE_MSM_GPIO_PINS (18 ); +DECLARE_MSM_GPIO_PINS (19 ); +DECLARE_MSM_GPIO_PINS (20 ); +DECLARE_MSM_GPIO_PINS (21 ); +DECLARE_MSM_GPIO_PINS (22 ); +DECLARE_MSM_GPIO_PINS (23 ); +DECLARE_MSM_GPIO_PINS (24 ); +DECLARE_MSM_GPIO_PINS (25 ); +DECLARE_MSM_GPIO_PINS (26 ); +DECLARE_MSM_GPIO_PINS (27 ); +DECLARE_MSM_GPIO_PINS (28 ); +DECLARE_MSM_GPIO_PINS (29 ); +DECLARE_MSM_GPIO_PINS (30 ); +DECLARE_MSM_GPIO_PINS (31 ); +DECLARE_MSM_GPIO_PINS (32 ); +DECLARE_MSM_GPIO_PINS (33 ); +DECLARE_MSM_GPIO_PINS (34 ); +DECLARE_MSM_GPIO_PINS (35 ); +DECLARE_MSM_GPIO_PINS (36 ); +DECLARE_MSM_GPIO_PINS (37 ); +DECLARE_MSM_GPIO_PINS (38 ); +DECLARE_MSM_GPIO_PINS (39 ); +DECLARE_MSM_GPIO_PINS (40 ); +DECLARE_MSM_GPIO_PINS (41 ); +DECLARE_MSM_GPIO_PINS (42 ); +DECLARE_MSM_GPIO_PINS (43 ); +DECLARE_MSM_GPIO_PINS (44 ); +DECLARE_MSM_GPIO_PINS (45 ); +DECLARE_MSM_GPIO_PINS (46 ); +DECLARE_MSM_GPIO_PINS (47 ); +DECLARE_MSM_GPIO_PINS (48 ); +DECLARE_MSM_GPIO_PINS (49 ); +DECLARE_MSM_GPIO_PINS (50 ); +DECLARE_MSM_GPIO_PINS (51 ); +DECLARE_MSM_GPIO_PINS (52 ); +DECLARE_MSM_GPIO_PINS (53 ); +DECLARE_MSM_GPIO_PINS (54 ); +DECLARE_MSM_GPIO_PINS (55 ); +DECLARE_MSM_GPIO_PINS (56 ); +DECLARE_MSM_GPIO_PINS (57 ); +DECLARE_MSM_GPIO_PINS (58 ); +DECLARE_MSM_GPIO_PINS (59 ); +DECLARE_MSM_GPIO_PINS (60 ); +DECLARE_MSM_GPIO_PINS (61 ); +DECLARE_MSM_GPIO_PINS (62 ); +DECLARE_MSM_GPIO_PINS (63 ); +DECLARE_MSM_GPIO_PINS (64 ); +DECLARE_MSM_GPIO_PINS (65 ); +DECLARE_MSM_GPIO_PINS (66 ); +DECLARE_MSM_GPIO_PINS (67 ); +DECLARE_MSM_GPIO_PINS (68 ); +DECLARE_MSM_GPIO_PINS (69 ); +DECLARE_MSM_GPIO_PINS (70 ); +DECLARE_MSM_GPIO_PINS (71 ); +DECLARE_MSM_GPIO_PINS (72 ); +DECLARE_MSM_GPIO_PINS (73 ); +DECLARE_MSM_GPIO_PINS (74 ); +DECLARE_MSM_GPIO_PINS (75 ); +DECLARE_MSM_GPIO_PINS (76 ); +DECLARE_MSM_GPIO_PINS (77 ); +DECLARE_MSM_GPIO_PINS (78 ); +DECLARE_MSM_GPIO_PINS (79 ); +DECLARE_MSM_GPIO_PINS (80 ); +DECLARE_MSM_GPIO_PINS (81 ); +DECLARE_MSM_GPIO_PINS (82 ); +DECLARE_MSM_GPIO_PINS (83 ); +DECLARE_MSM_GPIO_PINS (84 ); +DECLARE_MSM_GPIO_PINS (85 ); +DECLARE_MSM_GPIO_PINS (86 ); +DECLARE_MSM_GPIO_PINS (87 ); +DECLARE_MSM_GPIO_PINS (88 ); +DECLARE_MSM_GPIO_PINS (89 ); +DECLARE_MSM_GPIO_PINS (90 ); +DECLARE_MSM_GPIO_PINS (91 ); +DECLARE_MSM_GPIO_PINS (92 ); +DECLARE_MSM_GPIO_PINS (93 ); +DECLARE_MSM_GPIO_PINS (94 ); +DECLARE_MSM_GPIO_PINS (95 ); +DECLARE_MSM_GPIO_PINS (96 ); +DECLARE_MSM_GPIO_PINS (97 ); +DECLARE_MSM_GPIO_PINS (98 ); +DECLARE_MSM_GPIO_PINS (99 ); +DECLARE_MSM_GPIO_PINS (100 ); +DECLARE_MSM_GPIO_PINS (101 ); +DECLARE_MSM_GPIO_PINS (102 ); +DECLARE_MSM_GPIO_PINS (103 ); +DECLARE_MSM_GPIO_PINS (104 ); +DECLARE_MSM_GPIO_PINS (105 ); +DECLARE_MSM_GPIO_PINS (106 ); +DECLARE_MSM_GPIO_PINS (107 ); +DECLARE_MSM_GPIO_PINS (108 ); +DECLARE_MSM_GPIO_PINS (109 ); +DECLARE_MSM_GPIO_PINS (110 ); +DECLARE_MSM_GPIO_PINS (111 ); +DECLARE_MSM_GPIO_PINS (112 ); +DECLARE_MSM_GPIO_PINS (113 ); + +static const unsigned int sdc1_clk_pins[] = {114 }; +static const unsigned int sdc1_cmd_pins[] = {115 }; +static const unsigned int sdc1_data_pins[] = {116 }; +static const unsigned int sdc2_clk_pins[] = {117 }; +static const unsigned int sdc2_cmd_pins[] = {118 }; +static const unsigned int sdc2_data_pins[] = {119 }; +static const unsigned int sdc1_rclk_pins[] = {120 }; + +enum sdm660_functions { + msm_mux_blsp_spi1, + msm_mux_gpio, + msm_mux_blsp_uim1, + msm_mux_tgu_ch0, + msm_mux_qdss_gpio4, + msm_mux_atest_gpsadc1, + msm_mux_blsp_uart1, + msm_mux_phase_flag14, + msm_mux_blsp_i2c2, + msm_mux_phase_flag31, + msm_mux_blsp_spi3, + msm_mux_blsp_spi3_cs1, + msm_mux_blsp_spi3_cs2, + msm_mux_wlan1_adc1, + msm_mux_atest_usb13, + msm_mux_tgu_ch1, + msm_mux_qdss_gpio5, + msm_mux_atest_gpsadc0, + msm_mux_blsp_i2c1, + msm_mux_ddr_bist, + msm_mux_atest_tsens2, + msm_mux_atest_usb1, + msm_mux_blsp_spi2, + msm_mux_blsp_uim2, + msm_mux_phase_flag3, + msm_mux_bimc_dte1, + msm_mux_wlan1_adc0, + msm_mux_atest_usb12, + msm_mux_bimc_dte0, + msm_mux_blsp_i2c3, + msm_mux_wlan2_adc1, + msm_mux_atest_usb11, + msm_mux_dbg_out, + msm_mux_wlan2_adc0, + msm_mux_atest_usb10, + msm_mux_blsp_spi4, + msm_mux_pri_mi2s, + msm_mux_phase_flag26, + msm_mux_qdss_cti0_a, + msm_mux_qdss_cti0_b, + msm_mux_qdss_cti1_a, + msm_mux_qdss_cti1_b, + msm_mux_pri_mi2s_ws, + msm_mux_phase_flag27, + msm_mux_blsp_i2c4, + msm_mux_phase_flag28, + msm_mux_blsp_uart5, + msm_mux_blsp_spi5, + msm_mux_blsp_uim5, + msm_mux_phase_flag5, + msm_mux_blsp_i2c5, + msm_mux_blsp_spi6, + msm_mux_blsp_uart2, + msm_mux_blsp_uim6, + msm_mux_phase_flag11, + msm_mux_vsense_data0, + msm_mux_blsp_i2c6, + msm_mux_phase_flag12, + msm_mux_vsense_data1, + msm_mux_phase_flag13, + msm_mux_vsense_mode, + msm_mux_blsp_spi7, + msm_mux_blsp_uart6_a, + msm_mux_blsp_uart6_b, + msm_mux_sec_mi2s, + msm_mux_sndwire_clk, + msm_mux_phase_flag17, + msm_mux_vsense_clkout, + msm_mux_sndwire_data, + msm_mux_phase_flag18, + msm_mux_blsp_i2c7, + msm_mux_phase_flag19, + msm_mux_vfr_1, + msm_mux_phase_flag20, + msm_mux_blsp_spi8_cs1, + msm_mux_blsp_spi8_cs2, + msm_mux_m_voc, + msm_mux_phase_flag21, + msm_mux_phase_flag22, + msm_mux_blsp_i2c8_a, + msm_mux_blsp_i2c8_b, + msm_mux_phase_flag23, + msm_mux_pwr_modem, + msm_mux_phase_flag24, + msm_mux_qdss_gpio, + msm_mux_cam_mclk, + msm_mux_pwr_nav, + msm_mux_qdss_gpio0, + msm_mux_qspi_data0, + msm_mux_pwr_crypto, + msm_mux_qdss_gpio1, + msm_mux_qspi_data1, + msm_mux_agera_pll, + msm_mux_qdss_gpio2, + msm_mux_qspi_data2, + msm_mux_jitter_bist, + msm_mux_qdss_gpio3, + msm_mux_qdss_gpio7, + msm_mux_mdss_vsync0, + msm_mux_mdss_vsync1, + msm_mux_mdss_vsync2, + msm_mux_mdss_vsync3, + msm_mux_qdss_gpio9, + msm_mux_atest_usb2, + msm_mux_cci_i2c, + msm_mux_pll_bypassnl, + msm_mux_atest_tsens, + msm_mux_atest_usb21, + msm_mux_pll_reset, + msm_mux_atest_usb23, + msm_mux_qdss_gpio6, + msm_mux_qspi_cs, + msm_mux_qdss_gpio10, + msm_mux_qdss_gpio11, + msm_mux_cci_async, + msm_mux_qdss_gpio12, + msm_mux_qdss_gpio13, + msm_mux_qspi_clk, + msm_mux_phase_flag30, + msm_mux_qdss_gpio14, + msm_mux_qspi_resetn, + msm_mux_phase_flag1, + msm_mux_qdss_gpio15, + msm_mux_phase_flag2, + msm_mux_phase_flag9, + msm_mux_qspi_data3, + msm_mux_phase_flag15, + msm_mux_qdss_gpio8, + msm_mux_phase_flag16, + msm_mux_phase_flag6, + msm_mux_phase_flag29, + msm_mux_phase_flag25, + msm_mux_phase_flag10, + msm_mux_atest_usb20, + msm_mux_gcc_gp1, + msm_mux_phase_flag4, + msm_mux_atest_usb22, + msm_mux_gcc_gp2, + msm_mux_atest_char, + msm_mux_mdp_vsync, + msm_mux_gcc_gp3, + msm_mux_atest_char3, + msm_mux_cri_trng0, + msm_mux_atest_char2, + msm_mux_cri_trng1, + msm_mux_atest_char1, + msm_mux_audio_ref, + msm_mux_cri_trng, + msm_mux_atest_char0, + msm_mux_blsp_spi8_a, + msm_mux_blsp_spi8_b, + msm_mux_sp_cmu, + msm_mux_nav_pps_a, + msm_mux_nav_pps_b, + msm_mux_nav_pps_c, + msm_mux_gps_tx_a, + msm_mux_gps_tx_b, + msm_mux_gps_tx_c, + msm_mux_adsp_ext, + msm_mux_ssc_irq, + msm_mux_isense_dbg, + msm_mux_phase_flag0, + msm_mux_phase_flag7, + msm_mux_phase_flag8, + msm_mux_tsense_pwm1, + msm_mux_tsense_pwm2, + msm_mux_mss_lte, + msm_mux_uim2_data, + msm_mux_uim2_clk, + msm_mux_uim2_reset, + msm_mux_uim2_present, + msm_mux_uim1_data, + msm_mux_uim1_clk, + msm_mux_uim1_reset, + msm_mux_uim1_present, + msm_mux_uim_batt, + msm_mux_pa_indicator,drivers/pinctrl/qcom/pinctrl-sdm660.c line 527
Quoted 10 lines
drivers/pinctrl/qcom/pinctrl-sdm660.c new file +10
-0+ msm_mux_ldo_en, + msm_mux_ldo_update, + msm_mux_qlink_request, + msm_mux_qlink_enable, + msm_mux_prng_rosc, + msm_mux__, +}; + +static const char *const gpio_groups[] = { + "gpio0", "gpio1", "gpio2", "gpio3", "gpio4", "gpio5", "gpio6","gpio7",
drivers/pinctrl/qcom/pinctrl-sdm660.c line 529
Quoted 2 lines
drivers/pinctrl/qcom/pinctrl-sdm660.c new file +2
-0+"gpio8" ,"gpio9" ,"gpio10" ,"gpio11" ,"gpio12" ,"gpio13" ,"gpio14" , + "gpio15", "gpio16", "gpio17", "gpio18", "gpio19", "gpio20","gpio21",
drivers/pinctrl/qcom/pinctrl-sdm660.c line 530
Quoted 1 line
drivers/pinctrl/qcom/pinctrl-sdm660.c new file +1
-0+ "gpio22", "gpio23", "gpio24", "gpio25", "gpio26", "gpio27","gpio28",
drivers/pinctrl/qcom/pinctrl-sdm660.c line 531
Quoted 1 line
drivers/pinctrl/qcom/pinctrl-sdm660.c new file +1
-0+ "gpio29", "gpio30", "gpio31", "gpio32", "gpio33", "gpio34","gpio35",
drivers/pinctrl/qcom/pinctrl-sdm660.c line 532
Quoted 1 line
drivers/pinctrl/qcom/pinctrl-sdm660.c new file +1
-0+ "gpio36", "gpio37", "gpio38", "gpio39", "gpio40", "gpio41","gpio42",
drivers/pinctrl/qcom/pinctrl-sdm660.c line 533
Quoted 1 line
drivers/pinctrl/qcom/pinctrl-sdm660.c new file +1
-0+ "gpio43", "gpio44", "gpio45", "gpio46", "gpio47", "gpio48","gpio49",
drivers/pinctrl/qcom/pinctrl-sdm660.c line 534
Quoted 1 line
drivers/pinctrl/qcom/pinctrl-sdm660.c new file +1
-0+ "gpio50", "gpio51", "gpio52", "gpio53", "gpio54", "gpio55","gpio56",
drivers/pinctrl/qcom/pinctrl-sdm660.c line 535
Quoted 1 line
drivers/pinctrl/qcom/pinctrl-sdm660.c new file +1
-0+ "gpio57", "gpio58", "gpio59", "gpio60", "gpio61", "gpio62","gpio63",
drivers/pinctrl/qcom/pinctrl-sdm660.c line 536
Quoted 1 line
drivers/pinctrl/qcom/pinctrl-sdm660.c new file +1
-0+ "gpio64", "gpio65", "gpio66", "gpio67", "gpio68", "gpio69","gpio70",
drivers/pinctrl/qcom/pinctrl-sdm660.c line 537
Quoted 1 line
drivers/pinctrl/qcom/pinctrl-sdm660.c new file +1
-0+ "gpio71", "gpio72", "gpio73", "gpio74", "gpio75", "gpio76","gpio77",
drivers/pinctrl/qcom/pinctrl-sdm660.c line 538
Quoted 1 line
drivers/pinctrl/qcom/pinctrl-sdm660.c new file +1
-0+ "gpio78", "gpio79", "gpio80", "gpio81", "gpio82", "gpio83","gpio84",
drivers/pinctrl/qcom/pinctrl-sdm660.c line 539
Quoted 1 line
drivers/pinctrl/qcom/pinctrl-sdm660.c new file +1
-0+ "gpio85", "gpio86", "gpio87", "gpio88", "gpio89", "gpio90","gpio91",
drivers/pinctrl/qcom/pinctrl-sdm660.c line 540
Quoted 1 line
drivers/pinctrl/qcom/pinctrl-sdm660.c new file +1
-0+ "gpio92", "gpio93", "gpio94", "gpio95", "gpio96", "gpio97","gpio98",
Quoted 164 lines
drivers/pinctrl/qcom/pinctrl-sdm660.c new file +164
-0+"gpio99" ,"gpio100" ,"gpio101" ,"gpio102" ,"gpio103" ,"gpio104" , +"gpio105" ,"gpio106" ,"gpio107" ,"gpio108" ,"gpio109" ,"gpio110" , + "gpio111", "gpio112", "gpio113", +}; +static const char *const blsp_spi1_groups[] = { +"gpio0" ,"gpio1" ,"gpio2" ,"gpio3" ,"gpio46" , +}; +static const char *const blsp_uim1_groups[] = { +"gpio0" ,"gpio1" , +}; +static const char *const tgu_ch0_groups[] = { +"gpio0" , +}; +static const char *const qdss_gpio4_groups[] = { +"gpio0" ,"gpio36" , +}; +static const char *const atest_gpsadc1_groups[] = { +"gpio0" , +}; +static const char *const blsp_uart1_groups[] = { +"gpio0" ,"gpio1" ,"gpio2" ,"gpio3" , +}; +static const char *const phase_flag14_groups[] = { +"gpio5" , +}; +static const char *const blsp_i2c2_groups[] = { +"gpio6" ,"gpio7" , +}; +static const char *const phase_flag31_groups[] = { +"gpio6" , +}; +static const char *const blsp_spi3_groups[] = { +"gpio8" ,"gpio9" ,"gpio10" ,"gpio11" , +}; +static const char *const blsp_spi3_cs1_groups[] = { +"gpio30" , +}; +static const char *const blsp_spi3_cs2_groups[] = { +"gpio65" , +}; +static const char *const wlan1_adc1_groups[] = { +"gpio8" , +}; +static const char *const atest_usb13_groups[] = { +"gpio8" , +}; +static const char *const tgu_ch1_groups[] = { +"gpio1" , +}; +static const char *const qdss_gpio5_groups[] = { +"gpio1" ,"gpio37" , +}; +static const char *const atest_gpsadc0_groups[] = { +"gpio1" , +}; +static const char *const blsp_i2c1_groups[] = { +"gpio2" ,"gpio3" , +}; +static const char *const ddr_bist_groups[] = { +"gpio3" ,"gpio8" ,"gpio9" ,"gpio10" , +}; +static const char *const atest_tsens2_groups[] = { +"gpio3" , +}; +static const char *const atest_usb1_groups[] = { +"gpio3" , +}; +static const char *const blsp_spi2_groups[] = { +"gpio4" ,"gpio5" ,"gpio6" ,"gpio7" , +}; +static const char *const blsp_uim2_groups[] = { +"gpio4" ,"gpio5" , +}; +static const char *const phase_flag3_groups[] = { +"gpio4" , +}; +static const char *const bimc_dte1_groups[] = { +"gpio8" ,"gpio10" , +}; +static const char *const wlan1_adc0_groups[] = { +"gpio9" , +}; +static const char *const atest_usb12_groups[] = { +"gpio9" , +}; +static const char *const bimc_dte0_groups[] = { +"gpio9" ,"gpio11" , +}; +static const char *const blsp_i2c3_groups[] = { +"gpio10" ,"gpio11" , +}; +static const char *const wlan2_adc1_groups[] = { +"gpio10" , +}; +static const char *const atest_usb11_groups[] = { +"gpio10" , +}; +static const char *const dbg_out_groups[] = { +"gpio11" , +}; +static const char *const wlan2_adc0_groups[] = { +"gpio11" , +}; +static const char *const atest_usb10_groups[] = { +"gpio11" , +}; +static const char *const RCM_MARKER_groups[] = { +"gpio12" ,"gpio13" , +}; +static const char *const blsp_spi4_groups[] = { +"gpio12" ,"gpio13" ,"gpio14" ,"gpio15" , +}; +static const char *const pri_mi2s_groups[] = { +"gpio12" ,"gpio14" ,"gpio15" ,"gpio61" , +}; +static const char *const phase_flag26_groups[] = { +"gpio12" , +}; +static const char *const qdss_cti0_a_groups[] = { +"gpio49" ,"gpio50" , +}; +static const char *const qdss_cti0_b_groups[] = { +"gpio13" ,"gpio21" , +}; +static const char *const qdss_cti1_a_groups[] = { +"gpio53" ,"gpio55" , +}; +static const char *const qdss_cti1_b_groups[] = { +"gpio12" ,"gpio66" , +}; +static const char *const pri_mi2s_ws_groups[] = { +"gpio13" , +}; +static const char *const phase_flag27_groups[] = { +"gpio13" , +}; +static const char *const blsp_i2c4_groups[] = { +"gpio14" ,"gpio15" , +}; +static const char *const phase_flag28_groups[] = { +"gpio14" , +}; +static const char *const blsp_uart5_groups[] = { +"gpio16" ,"gpio17" ,"gpio18" ,"gpio19" , +}; +static const char *const blsp_spi5_groups[] = { +"gpio16" ,"gpio17" ,"gpio18" ,"gpio19" , +}; +static const char *const blsp_uim5_groups[] = { +"gpio16" ,"gpio17" , +}; +static const char *const phase_flag5_groups[] = { +"gpio17" , +}; +static const char *const blsp_i2c5_groups[] = { +"gpio18" ,"gpio19" , +}; +static const char *const blsp_spi6_groups[] = { +"gpio49" ,"gpio52" ,"gpio22" ,"gpio23" , +}; +static const char *const blsp_uart2_groups[] = { +"gpio4" ,"gpio5" ,"gpio6" ,"gpio7" , +}; +static const char *const blsp_uim6_groups[]
Signature · 1 line
Sent from my Android device with K-9 Mail. Please excuse my brevity.
Quoted 16 lines · Craig Tatlor
Quoted 13 lines · Michal Vokáč
Hi Craig,
Quoted 6 lines · Craig Tatlor
Add initial pinctrl driver to support pin configuration with pinctrl framework for sdm660.
Based off CAF implementation.Signed-off-by Craig Tatlor <[email protected]>---
The documentation portion should be a separate patch. Please refer to
Documentation/devicetree/bindings/submitting-patches.txt
Quoted 7 lines
Quoted 6 lines
It is easier for DT maintainers to review just the relevant part. The binding patches are also rebased to a separate tree as they are not Linux specific and can be re-used in other OSes
Best regards,
MichalI know, just did this because it is basically exactly same as other qcom pinctrl docs and they also only had one patch.
OK, I see. Anyway to me it seems that at some point this practice should change. Is it not better to prepare the patches how we want them to look like than how they looked like in the past?
I see the same problems elsewhere where folks are copying commits from each other. Like the messy SPDX license headers transformation..
Quoted 1,031 lines
Sorry if you got this multiple times, apparently my email client adds HTML to non inline replies
Quoted 1,028 lines
Quoted 9 lines
Changes from v1:
Adds gpio-ranges property to bindings.../bindings/pinctrl/qcom,sdm660-pinctrl.txt | 202 +++ drivers/pinctrl/qcom/Kconfig | 10 + drivers/pinctrl/qcom/Makefile | 1 + drivers/pinctrl/qcom/pinctrl-sdm660.c | 1451+++++++++++++++++
Quoted 2 lines
4 files changed, 1663 insertions(+)create mode 100644
Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txtQuoted 3 lines
create mode 100644
drivers/pinctrl/qcom/pinctrl-sdm660.cdiff --git
a/Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txtb/Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txtQuoted 4 lines
new file mode 100644
index 000000000000..801960ad2112
---/dev/null
+++
b/Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txtDocumentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt line 3
Quoted 4 lines
Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt new file +3
-0@@ -0,0 +1,202 @@ +Qualcomm Technologies, Inc. SDM660 TLMM block + +This binding describes the Top Level Mode Multiplexer block found inthe
Quoted 16 lines
Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt new file +16
-0+SDM660 platform. + +- compatible: + Usage: required + Value type: <string> + Definition: must be "qcom,sdm660-pinctrl" + +- reg: + Usage: required + Value type: <prop-encoded-array> + Definition: the base address and size of the TLMM register space. + +- interrupts: + Usage: required + Value type: <prop-encoded-array> + Definition: should specify the TLMM summary IRQ.Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt
Quoted 10 lines
Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt new file +10
-0+ +- interrupt-controller: + Usage: required + Value type: <none> + Definition: identifies this node as an interrupt controller + +- #interrupt-cells: + Usage: required + Value type: <u32> + Definition: must be 2. Specifying the pin number and flags, asdefined
Quoted 7 lines
Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt new file +7
-0+ in <dt-bindings/interrupt-controller/irq.h> + +- gpio-controller: + Usage: required + Value type: <none> + Definition: identifies this node as a gpio controller +Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt
Quoted 10 lines
Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt new file +10
-0+- gpio-ranges: + Usage: required + Value type: <prop-encoded-array> + Definition: Specifies the mapping between gpio controller and + pin-controller pins. + +- #gpio-cells: + Usage: required + Value type: <u32> + Definition: must be 2. Specifying the pin number and flags, asdefined
Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt
Quoted 3 lines
Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt new file +3
-0+ in <dt-bindings/gpio/gpio.h> + +Please refer to ../gpio/gpio.txt and
../interrupt-controller/interrupts.txtforDocumentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt
Quoted 3 lines
Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt new file +3
-0+a general description of GPIO and interrupt bindings. + +Please refer to pinctrl-bindings.txt in this directory for detailsof the
Review line 53
Quoted 1 line
(quoted diff) +1
-0+common pinctrl bindings used by client devices, including themeaning of the
Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt
Quoted 3 lines
Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt new file +3
-0+phrase "pin configuration node". + +The pin configuration nodes act as a container for an arbitrarynumber of
Review line 57
Quoted 1 line
(quoted diff) +1
-0+subnodes. Each of these subnodes represents some desiredconfiguration for a
Review line 58
Quoted 1 line
(quoted diff) +1
-0+pin, a group, or a list of pins or groups. This configuration caninclude the
Review line 59
Quoted 1 line
(quoted diff) +1
-0+mux function to select on those pin(s)/group(s), and various pinconfiguration
Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt
Quoted 6 lines
Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt new file +6
-0+parameters, such as pull-up, drive strength, etc. + + +PIN CONFIGURATION NODES: + +The name of each subnode is not important; all subnodes should beenumerated
Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt
Quoted 3 lines
Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt new file +3
-0+and processed purely based on their content. + +Each subnode only affects those parameters that are explicitlylisted. In
Review line 69
Quoted 1 line
(quoted diff) +1
-0+other words, a subnode that lists a mux function but no pinconfiguration
Review line 70
Quoted 1 line
(quoted diff) +1
-0+parameters implies no information about any pin configurationparameters.
Review line 71
Quoted 1 line
(quoted diff) +1
-0+Similarly, a pin subnode that describes a pullup parameter impliesno
Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt
Quoted 4 lines
Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt new file +4
-0+information about e.g. the mux function. + + +The following generic properties as defined in pinctrl-bindings.txtare valid
Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt
Quoted 6 lines
Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt new file +6
-0+to specify in a pin configuration subnode: + +- pins: + Usage: required + Value type: <string-array> + Definition: List of gpio pins affected by the properties specifiedin
Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt
Quoted 4 lines
Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt new file +4
-0+ this subnode. Valid pins are: + gpio0-gpio113, + Supports mux, bias and drive-strength + sdc1_clk, sdc1_cmd, sdc1_data sdc2_clk, sdc2_cmd, sdc2_data
sdc1_rclk,Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt
Quoted 6 lines
Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt new file +6
-0+ Supports bias and drive-strength + +- function: + Usage: required + Value type: <string> + Definition: Specify the alternative function to be configured forthe
Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt
Quoted 6 lines
Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt new file +6
-0+ specified pins. Functions are only valid for gpio pins. + Valid values are: + + blsp_uart1, blsp_spi1, blsp_i2c1, blsp_uim1, atest_tsens, + bimc_dte1, dac_calib0, blsp_spi8, blsp_uart8, blsp_uim8, + qdss_cti_trig_out_b, bimc_dte0, dac_calib1,
qdss_cti_trig_in_b,Review line 99
Quoted 2 lines
(quoted diff) +2
-0+ dac_calib2, atest_tsens2, atest_usb1, blsp_spi10, blsp_uart10, + blsp_uim10, atest_bbrx1, atest_usb13, atest_bbrx0,
atest_usb12,Review line 101
Quoted 2 lines
(quoted diff) +2
-0+ mdp_vsync, edp_lcd, blsp_i2c10, atest_gpsadc1, atest_usb11, + atest_gpsadc0, edp_hot, atest_usb10, m_voc, dac_gpio,
atest_char,Review line 102
Quoted 1 line
(quoted diff) +1
-0+ cam_mclk, pll_bypassnl, qdss_stm7, blsp_i2c8,
qdss_tracedata_b,Review line 103
Quoted 1 line
(quoted diff) +1
-0+ pll_reset, qdss_stm6, qdss_stm5, qdss_stm4, atest_usb2,
cci_i2c,Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt
Quoted 5 lines
Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt new file +5
-0+ qdss_stm3, dac_calib3, atest_usb23, atest_char3, dac_calib4, + qdss_stm2, atest_usb22, atest_char2, qdss_stm1, dac_calib5, + atest_usb21, atest_char1, dbg_out, qdss_stm0, dac_calib6, + atest_usb20, atest_char0, dac_calib10, qdss_stm10, + qdss_cti_trig_in_a, cci_timer4, blsp_spi6, blsp_uart6,
blsp_uim6,Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt
Quoted 9 lines
Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt new file +9
-0+ blsp2_spi, qdss_stm9, qdss_cti_trig_out_a, dac_calib11, + qdss_stm8, cci_timer0, qdss_stm13, dac_calib7, cci_timer1, + qdss_stm12, dac_calib8, cci_timer2, blsp1_spi, qdss_stm11, + dac_calib9, cci_timer3, cci_async, dac_calib12, blsp_i2c6, + qdss_tracectl_a, dac_calib13, qdss_traceclk_a, dac_calib14, + dac_calib15, hdmi_rcv, dac_calib16, hdmi_cec, pwr_modem, + dac_calib17, hdmi_ddc, pwr_nav, dac_calib18, pwr_crypto, + dac_calib19, hdmi_hot, dac_calib20, dac_calib21, pci_e0, + dac_calib22, dac_calib23, dac_calib24, tsif1_sync,
dac_calib25,Review line 119
Quoted 2 lines
(quoted diff) +2
-0+ sd_write, tsif1_error, blsp_spi2, blsp_uart2, blsp_uim2, + qdss_cti, blsp_i2c2, blsp_spi3, blsp_uart3, blsp_uim3,
blsp_i2c3,Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt
Quoted 3 lines
Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt new file +3
-0+ uim3, blsp_spi9, blsp_uart9, blsp_uim9, blsp10_spi, blsp_i2c9, + blsp_spi7, blsp_uart7, blsp_uim7, qdss_tracedata_a, blsp_i2c7, + qua_mi2s, gcc_gp1_clk_a, ssc_irq, uim4, blsp_spi11,
blsp_uart11,Review line 123
Quoted 1 line
(quoted diff) +1
-0+ blsp_uim11, gcc_gp2_clk_a, gcc_gp3_clk_a, blsp_i2c11,
cri_trng0,Review line 124
Quoted 1 line
(quoted diff) +1
-0+ cri_trng1, cri_trng, qdss_stm18, pri_mi2s, qdss_stm17,
blsp_spi4,Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt
Quoted 8 lines
Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt new file +8
-0+ blsp_uart4, blsp_uim4, qdss_stm16, qdss_stm15, blsp_i2c4, + qdss_stm14, dac_calib26, spkr_i2s, audio_ref, lpass_slimbus, + isense_dbg, tsense_pwm1, tsense_pwm2, btfm_slimbus, ter_mi2s, + qdss_stm22, qdss_stm21, qdss_stm20, qdss_stm19, gcc_gp1_clk_b, + sec_mi2s, blsp_spi5, blsp_uart5, blsp_uim5, gcc_gp2_clk_b, + gcc_gp3_clk_b, blsp_i2c5, blsp_spi12, blsp_uart12, blsp_uim12, + qdss_stm25, qdss_stm31, blsp_i2c12, qdss_stm30, qdss_stm29, + tsif1_clk, qdss_stm28, tsif1_en, tsif1_data, sdc4_cmd,
qdss_stm27,Review line 133
Quoted 1 line
(quoted diff) +1
-0+ qdss_traceclk_b, tsif2_error, sdc43, vfr_1, qdss_stm26,
tsif2_clk,Review line 134
Quoted 1 line
(quoted diff) +1
-0+ sdc4_clk, qdss_stm24, tsif2_en, sdc42, qdss_stm23,
qdss_tracectl_b,Review line 136
Quoted 2 lines
(quoted diff) +2
-0+ sd_card, tsif2_data, sdc41, tsif2_sync, sdc40, mdp_vsync_p_b, + ldo_en, mdp_vsync_s_b, ldo_update, blsp11_uart_tx_b,
blsp11_uart_rx_b,Review line 137
Quoted 1 line
(quoted diff) +1
-0+ blsp11_i2c_sda_b, prng_rosc, blsp11_i2c_scl_b, uim2, uim1,
uim_batt,Review line 139
Quoted 2 lines
(quoted diff) +2
-0+ pci_e2, pa_indicator, adsp_ext, ddr_bist, qdss_tracedata_11, + qdss_tracedata_12, modem_tsync, nav_dr, nav_pps, pci_e1,
gsm_tx,Review line 140
Quoted 1 line
(quoted diff) +1
-0+ qspi_cs, ssbi2, ssbi1, mss_lte, qspi_clk, qspi0, qspi1, qspi2,qspi3,
Quoted 11 lines
Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt new file +11
-0+ gpio + +- bias-disable: + Usage: optional + Value type: <none> + Definition: The specified pins should be configued as no pull. + +- bias-pull-down: + Usage: optional + Value type: <none> + Definition: The specified pins should be configued as pull down.Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt
Quoted 10 lines
Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt new file +10
-0+ +- bias-pull-up: + Usage: optional + Value type: <none> + Definition: The specified pins should be configued as pull up. + +- output-high: + Usage: optional + Value type: <none> + Definition: The specified pins are configured in output mode,driven
Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt
Quoted 7 lines
Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt new file +7
-0+ high. + Not valid for sdc pins. + +- output-low: + Usage: optional + Value type: <none> + Definition: The specified pins are configured in output mode,driven
Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt
Quoted 7 lines
Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt new file +7
-0+ low. + Not valid for sdc pins. + +- drive-strength: + Usage: optional + Value type: <u32> + Definition: Selects the drive strength for the specified pins, inmA.
Review
Quoted 28 lines
Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt new file +27
-0+ Valid values are: 2, 4, 6, 8, 10, 12, 14 and 16 + +Example: + + tlmm: pinctrl@1010000 { + compatible = "qcom,sdm660-pinctrl"; + reg = <0x1010000 0x300000>; + interrupts = <0 208 0>; + gpio-controller; + gpio-ranges = <&tlmm 0 0 114>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + + uart_console_active: uart_console_active { + mux { + pins = "gpio4", "gpio5"; + function = "blsp_uart8"; + }; + + config { + pins = "gpio4", "gpio5"; + drive-strength = <2>; + bias-disable; + }; + }; + };(quoted diff) +0
-0b/drivers/pinctrl/qcom/Kconfig
drivers/pinctrl/qcom/Kconfig config PINCTRL_QCOM_SSBI_PMIC · line 147
Quoted 5 lines
index 195492033075..091beadb8a1c 100644
drivers/pinctrl/qcom/Kconfig +0
-0@@ -147,6 +147,16 @@ config PINCTRL_QCOM_SSBI_PMIC which are using SSBI for communication with SoC. ExamplePMIC's
drivers/pinctrl/qcom/Kconfig config PINCTRL_QCOM_SSBI_PMIC
Quoted 4 lines
drivers/pinctrl/qcom/Kconfig +2
-0devices are pm8058 and pm8921. +config PINCTRL_SDM660 + tristate "Qualcomm Technologies Inc SDM660 pin controllerdriver"
drivers/pinctrl/qcom/Kconfig config PINCTRL_QCOM_SSBI_PMIC
Quoted 4 lines
drivers/pinctrl/qcom/Kconfig +4
-0+ depends on GPIOLIB && OF + select PINCTRL_MSM + help + This is the pinctrl, pinmux, pinconf and gpiolib driver forthe
drivers/pinctrl/qcom/Kconfig config PINCTRL_QCOM_SSBI_PMIC
Quoted 6 lines
drivers/pinctrl/qcom/Kconfig +4
-0+ Qualcomm Technologies Inc TLMM block found on the Qualcomm + Technologies Inc SDM660 platform. + + config PINCTRL_SDM845 tristate "Qualcomm Technologies Inc SDM845 pin controllerdriver"
Review
Quoted 2 lines
drivers/pinctrl/qcom/Kconfig +0
-0depends on GPIOLIB && OF(quoted diff) +0
-0b/drivers/pinctrl/qcom/Makefile
drivers/pinctrl/qcom/Makefile obj-$(CONFIG_PINCTRL_QCOM_SPMI_PMIC) +=
Quoted 4 lines
index
0c6f3ddc296d..9b08808a2f1c100644drivers/pinctrl/qcom/Makefile +0
-0@@ -19,4 +19,5 @@ obj-$(CONFIG_PINCTRL_QCOM_SPMI_PMIC) +=pinctrl-spmi-gpio.o
Review
Quoted 6 lines
drivers/pinctrl/qcom/Makefile +1
-0obj-$(CONFIG_PINCTRL_QCOM_SPMI_PMIC) += pinctrl-spmi-mpp.o obj-$(CONFIG_PINCTRL_QCOM_SSBI_PMIC) += pinctrl-ssbi-gpio.o obj-$(CONFIG_PINCTRL_QCOM_SSBI_PMIC) += pinctrl-ssbi-mpp.o +obj-$(CONFIG_PINCTRL_SDM660) += pinctrl-sdm660.o obj-$(CONFIG_PINCTRL_SDM845) += pinctrl-sdm845.o(quoted diff) +0
-0
b/drivers/pinctrl/qcom/pinctrl-sdm660.cQuoted 522 lines
new file mode 100644
index 000000000000..ded56111f168drivers/pinctrl/qcom/pinctrl-sdm660.c new file +517
-0@@ -0,0 +1,1451 @@ +// SPDX-License-Identifier: GPL-2.0 +/* +* Copyright (c) 2016, The Linux Foundation. All rights reserved. +* Copyright (c) 2018, Craig Tatlor. +*/ + +#include <linux/module.h> +#include <linux/of.h> +#include <linux/platform_device.h> +#include <linux/pinctrl/pinctrl.h> + +#include "pinctrl-msm.h" + +#define NORTH 0x00900000 +#define CENTER 0x00500000 +#define SOUTH 0x00100000 +#define REG_SIZE 0x1000 + +#define FUNCTION (fname) \ + [msm_mux_##fname] = { \ + .name = #fname, \ + .groups = fname##_groups, \ + .ngroups = ARRAY_SIZE(fname##_groups), \ + } + + +#define PINGROUP(id, base, f1, f2, f3, f4, f5, f6, f7, f8, f9) \ + { \ + .name = "gpio" #id, \ + .pins = gpio##id##_pins, \ + .npins = (unsigned)ARRAY_SIZE(gpio##id##_pins), \ + .funcs = (int[]){ \ + msm_mux_gpio, /* gpio mode */ \ + msm_mux_##f1, \ + msm_mux_##f2, \ + msm_mux_##f3, \ + msm_mux_##f4, \ + msm_mux_##f5, \ + msm_mux_##f6, \ + msm_mux_##f7, \ + msm_mux_##f8, \ + msm_mux_##f9 \ + }, \ + .nfuncs = 10, \ + .ctl_reg = base + REG_SIZE * id, \ + .io_reg = base + 0x4 + REG_SIZE * id, \ + .intr_cfg_reg = base + 0x8 + REG_SIZE * id, \ + .intr_status_reg = base + 0xc + REG_SIZE * id, \ + .intr_target_reg = base + 0x8 + REG_SIZE * id, \ + .mux_bit = 2, \ + .pull_bit = 0, \ + .drv_bit = 6, \ + .oe_bit = 9, \ + .in_bit = 0, \ + .out_bit = 1, \ + .intr_enable_bit = 0, \ + .intr_status_bit = 0, \ + .intr_target_bit = 5, \ + .intr_target_kpss_val = 3, \ + .intr_raw_status_bit = 4, \ + .intr_polarity_bit = 1, \ + .intr_detection_bit = 2, \ + .intr_detection_width = 2, \ + } + +#define SDC_QDSD_PINGROUP (pg_name, ctl, pull, drv) \ + { \ + .name = #pg_name, \ + .pins = pg_name##_pins, \ + .npins = (unsigned)ARRAY_SIZE(pg_name##_pins), \ + .ctl_reg = ctl, \ + .io_reg = 0, \ + .intr_cfg_reg = 0, \ + .intr_status_reg = 0, \ + .intr_target_reg = 0, \ + .mux_bit = -1, \ + .pull_bit = pull, \ + .drv_bit = drv, \ + .oe_bit = -1, \ + .in_bit = -1, \ + .out_bit = -1, \ + .intr_enable_bit = -1, \ + .intr_status_bit = -1, \ + .intr_target_bit = -1, \ + .intr_raw_status_bit = -1, \ + .intr_polarity_bit = -1, \ + .intr_detection_bit = -1, \ + .intr_detection_width = -1, \ + } + +static const struct pinctrl_pin_desc sdm660_pins[] = { +PINCTRL_PIN (0 ,"GPIO_0" ), +PINCTRL_PIN (1 ,"GPIO_1" ), +PINCTRL_PIN (2 ,"GPIO_2" ), +PINCTRL_PIN (3 ,"GPIO_3" ), +PINCTRL_PIN (4 ,"GPIO_4" ), +PINCTRL_PIN (5 ,"GPIO_5" ), +PINCTRL_PIN (6 ,"GPIO_6" ), +PINCTRL_PIN (7 ,"GPIO_7" ), +PINCTRL_PIN (8 ,"GPIO_8" ), +PINCTRL_PIN (9 ,"GPIO_9" ), +PINCTRL_PIN (10 ,"GPIO_10" ), +PINCTRL_PIN (11 ,"GPIO_11" ), +PINCTRL_PIN (12 ,"GPIO_12" ), +PINCTRL_PIN (13 ,"GPIO_13" ), +PINCTRL_PIN (14 ,"GPIO_14" ), +PINCTRL_PIN (15 ,"GPIO_15" ), +PINCTRL_PIN (16 ,"GPIO_16" ), +PINCTRL_PIN (17 ,"GPIO_17" ), +PINCTRL_PIN (18 ,"GPIO_18" ), +PINCTRL_PIN (19 ,"GPIO_19" ), +PINCTRL_PIN (20 ,"GPIO_20" ), +PINCTRL_PIN (21 ,"GPIO_21" ), +PINCTRL_PIN (22 ,"GPIO_22" ), +PINCTRL_PIN (23 ,"GPIO_23" ), +PINCTRL_PIN (24 ,"GPIO_24" ), +PINCTRL_PIN (25 ,"GPIO_25" ), +PINCTRL_PIN (26 ,"GPIO_26" ), +PINCTRL_PIN (27 ,"GPIO_27" ), +PINCTRL_PIN (28 ,"GPIO_28" ), +PINCTRL_PIN (29 ,"GPIO_29" ), +PINCTRL_PIN (30 ,"GPIO_30" ), +PINCTRL_PIN (31 ,"GPIO_31" ), +PINCTRL_PIN (32 ,"GPIO_32" ), +PINCTRL_PIN (33 ,"GPIO_33" ), +PINCTRL_PIN (34 ,"GPIO_34" ), +PINCTRL_PIN (35 ,"GPIO_35" ), +PINCTRL_PIN (36 ,"GPIO_36" ), +PINCTRL_PIN (37 ,"GPIO_37" ), +PINCTRL_PIN (38 ,"GPIO_38" ), +PINCTRL_PIN (39 ,"GPIO_39" ), +PINCTRL_PIN (40 ,"GPIO_40" ), +PINCTRL_PIN (41 ,"GPIO_41" ), +PINCTRL_PIN (42 ,"GPIO_42" ), +PINCTRL_PIN (43 ,"GPIO_43" ), +PINCTRL_PIN (44 ,"GPIO_44" ), +PINCTRL_PIN (45 ,"GPIO_45" ), +PINCTRL_PIN (46 ,"GPIO_46" ), +PINCTRL_PIN (47 ,"GPIO_47" ), +PINCTRL_PIN (48 ,"GPIO_48" ), +PINCTRL_PIN (49 ,"GPIO_49" ), +PINCTRL_PIN (50 ,"GPIO_50" ), +PINCTRL_PIN (51 ,"GPIO_51" ), +PINCTRL_PIN (52 ,"GPIO_52" ), +PINCTRL_PIN (53 ,"GPIO_53" ), +PINCTRL_PIN (54 ,"GPIO_54" ), +PINCTRL_PIN (55 ,"GPIO_55" ), +PINCTRL_PIN (56 ,"GPIO_56" ), +PINCTRL_PIN (57 ,"GPIO_57" ), +PINCTRL_PIN (58 ,"GPIO_58" ), +PINCTRL_PIN (59 ,"GPIO_59" ), +PINCTRL_PIN (60 ,"GPIO_60" ), +PINCTRL_PIN (61 ,"GPIO_61" ), +PINCTRL_PIN (62 ,"GPIO_62" ), +PINCTRL_PIN (63 ,"GPIO_63" ), +PINCTRL_PIN (64 ,"GPIO_64" ), +PINCTRL_PIN (65 ,"GPIO_65" ), +PINCTRL_PIN (66 ,"GPIO_66" ), +PINCTRL_PIN (67 ,"GPIO_67" ), +PINCTRL_PIN (68 ,"GPIO_68" ), +PINCTRL_PIN (69 ,"GPIO_69" ), +PINCTRL_PIN (70 ,"GPIO_70" ), +PINCTRL_PIN (71 ,"GPIO_71" ), +PINCTRL_PIN (72 ,"GPIO_72" ), +PINCTRL_PIN (73 ,"GPIO_73" ), +PINCTRL_PIN (74 ,"GPIO_74" ), +PINCTRL_PIN (75 ,"GPIO_75" ), +PINCTRL_PIN (76 ,"GPIO_76" ), +PINCTRL_PIN (77 ,"GPIO_77" ), +PINCTRL_PIN (78 ,"GPIO_78" ), +PINCTRL_PIN (79 ,"GPIO_79" ), +PINCTRL_PIN (80 ,"GPIO_80" ), +PINCTRL_PIN (81 ,"GPIO_81" ), +PINCTRL_PIN (82 ,"GPIO_82" ), +PINCTRL_PIN (83 ,"GPIO_83" ), +PINCTRL_PIN (84 ,"GPIO_84" ), +PINCTRL_PIN (85 ,"GPIO_85" ), +PINCTRL_PIN (86 ,"GPIO_86" ), +PINCTRL_PIN (87 ,"GPIO_87" ), +PINCTRL_PIN (88 ,"GPIO_88" ), +PINCTRL_PIN (89 ,"GPIO_89" ), +PINCTRL_PIN (90 ,"GPIO_90" ), +PINCTRL_PIN (91 ,"GPIO_91" ), +PINCTRL_PIN (92 ,"GPIO_92" ), +PINCTRL_PIN (93 ,"GPIO_93" ), +PINCTRL_PIN (94 ,"GPIO_94" ), +PINCTRL_PIN (95 ,"GPIO_95" ), +PINCTRL_PIN (96 ,"GPIO_96" ), +PINCTRL_PIN (97 ,"GPIO_97" ), +PINCTRL_PIN (98 ,"GPIO_98" ), +PINCTRL_PIN (99 ,"GPIO_99" ), +PINCTRL_PIN (100 ,"GPIO_100" ), +PINCTRL_PIN (101 ,"GPIO_101" ), +PINCTRL_PIN (102 ,"GPIO_102" ), +PINCTRL_PIN (103 ,"GPIO_103" ), +PINCTRL_PIN (104 ,"GPIO_104" ), +PINCTRL_PIN (105 ,"GPIO_105" ), +PINCTRL_PIN (106 ,"GPIO_106" ), +PINCTRL_PIN (107 ,"GPIO_107" ), +PINCTRL_PIN (108 ,"GPIO_108" ), +PINCTRL_PIN (109 ,"GPIO_109" ), +PINCTRL_PIN (110 ,"GPIO_110" ), +PINCTRL_PIN (111 ,"GPIO_111" ), +PINCTRL_PIN (112 ,"GPIO_112" ), +PINCTRL_PIN (113 ,"GPIO_113" ), +PINCTRL_PIN (114 ,"SDC1_CLK" ), +PINCTRL_PIN (115 ,"SDC1_CMD" ), +PINCTRL_PIN (116 ,"SDC1_DATA" ), +PINCTRL_PIN (117 ,"SDC2_CLK" ), +PINCTRL_PIN (118 ,"SDC2_CMD" ), +PINCTRL_PIN (119 ,"SDC2_DATA" ), +PINCTRL_PIN (120 ,"SDC1_RCLK" ), +}; + +#define DECLARE_MSM_GPIO_PINS (pin) \ + static const unsigned int gpio##pin##_pins[] = { pin } +DECLARE_MSM_GPIO_PINS (0 ); +DECLARE_MSM_GPIO_PINS (1 ); +DECLARE_MSM_GPIO_PINS (2 ); +DECLARE_MSM_GPIO_PINS (3 ); +DECLARE_MSM_GPIO_PINS (4 ); +DECLARE_MSM_GPIO_PINS (5 ); +DECLARE_MSM_GPIO_PINS (6 ); +DECLARE_MSM_GPIO_PINS (7 ); +DECLARE_MSM_GPIO_PINS (8 ); +DECLARE_MSM_GPIO_PINS (9 ); +DECLARE_MSM_GPIO_PINS (10 ); +DECLARE_MSM_GPIO_PINS (11 ); +DECLARE_MSM_GPIO_PINS (12 ); +DECLARE_MSM_GPIO_PINS (13 ); +DECLARE_MSM_GPIO_PINS (14 ); +DECLARE_MSM_GPIO_PINS (15 ); +DECLARE_MSM_GPIO_PINS (16 ); +DECLARE_MSM_GPIO_PINS (17 ); +DECLARE_MSM_GPIO_PINS (18 ); +DECLARE_MSM_GPIO_PINS (19 ); +DECLARE_MSM_GPIO_PINS (20 ); +DECLARE_MSM_GPIO_PINS (21 ); +DECLARE_MSM_GPIO_PINS (22 ); +DECLARE_MSM_GPIO_PINS (23 ); +DECLARE_MSM_GPIO_PINS (24 ); +DECLARE_MSM_GPIO_PINS (25 ); +DECLARE_MSM_GPIO_PINS (26 ); +DECLARE_MSM_GPIO_PINS (27 ); +DECLARE_MSM_GPIO_PINS (28 ); +DECLARE_MSM_GPIO_PINS (29 ); +DECLARE_MSM_GPIO_PINS (30 ); +DECLARE_MSM_GPIO_PINS (31 ); +DECLARE_MSM_GPIO_PINS (32 ); +DECLARE_MSM_GPIO_PINS (33 ); +DECLARE_MSM_GPIO_PINS (34 ); +DECLARE_MSM_GPIO_PINS (35 ); +DECLARE_MSM_GPIO_PINS (36 ); +DECLARE_MSM_GPIO_PINS (37 ); +DECLARE_MSM_GPIO_PINS (38 ); +DECLARE_MSM_GPIO_PINS (39 ); +DECLARE_MSM_GPIO_PINS (40 ); +DECLARE_MSM_GPIO_PINS (41 ); +DECLARE_MSM_GPIO_PINS (42 ); +DECLARE_MSM_GPIO_PINS (43 ); +DECLARE_MSM_GPIO_PINS (44 ); +DECLARE_MSM_GPIO_PINS (45 ); +DECLARE_MSM_GPIO_PINS (46 ); +DECLARE_MSM_GPIO_PINS (47 ); +DECLARE_MSM_GPIO_PINS (48 ); +DECLARE_MSM_GPIO_PINS (49 ); +DECLARE_MSM_GPIO_PINS (50 ); +DECLARE_MSM_GPIO_PINS (51 ); +DECLARE_MSM_GPIO_PINS (52 ); +DECLARE_MSM_GPIO_PINS (53 ); +DECLARE_MSM_GPIO_PINS (54 ); +DECLARE_MSM_GPIO_PINS (55 ); +DECLARE_MSM_GPIO_PINS (56 ); +DECLARE_MSM_GPIO_PINS (57 ); +DECLARE_MSM_GPIO_PINS (58 ); +DECLARE_MSM_GPIO_PINS (59 ); +DECLARE_MSM_GPIO_PINS (60 ); +DECLARE_MSM_GPIO_PINS (61 ); +DECLARE_MSM_GPIO_PINS (62 ); +DECLARE_MSM_GPIO_PINS (63 ); +DECLARE_MSM_GPIO_PINS (64 ); +DECLARE_MSM_GPIO_PINS (65 ); +DECLARE_MSM_GPIO_PINS (66 ); +DECLARE_MSM_GPIO_PINS (67 ); +DECLARE_MSM_GPIO_PINS (68 ); +DECLARE_MSM_GPIO_PINS (69 ); +DECLARE_MSM_GPIO_PINS (70 ); +DECLARE_MSM_GPIO_PINS (71 ); +DECLARE_MSM_GPIO_PINS (72 ); +DECLARE_MSM_GPIO_PINS (73 ); +DECLARE_MSM_GPIO_PINS (74 ); +DECLARE_MSM_GPIO_PINS (75 ); +DECLARE_MSM_GPIO_PINS (76 ); +DECLARE_MSM_GPIO_PINS (77 ); +DECLARE_MSM_GPIO_PINS (78 ); +DECLARE_MSM_GPIO_PINS (79 ); +DECLARE_MSM_GPIO_PINS (80 ); +DECLARE_MSM_GPIO_PINS (81 ); +DECLARE_MSM_GPIO_PINS (82 ); +DECLARE_MSM_GPIO_PINS (83 ); +DECLARE_MSM_GPIO_PINS (84 ); +DECLARE_MSM_GPIO_PINS (85 ); +DECLARE_MSM_GPIO_PINS (86 ); +DECLARE_MSM_GPIO_PINS (87 ); +DECLARE_MSM_GPIO_PINS (88 ); +DECLARE_MSM_GPIO_PINS (89 ); +DECLARE_MSM_GPIO_PINS (90 ); +DECLARE_MSM_GPIO_PINS (91 ); +DECLARE_MSM_GPIO_PINS (92 ); +DECLARE_MSM_GPIO_PINS (93 ); +DECLARE_MSM_GPIO_PINS (94 ); +DECLARE_MSM_GPIO_PINS (95 ); +DECLARE_MSM_GPIO_PINS (96 ); +DECLARE_MSM_GPIO_PINS (97 ); +DECLARE_MSM_GPIO_PINS (98 ); +DECLARE_MSM_GPIO_PINS (99 ); +DECLARE_MSM_GPIO_PINS (100 ); +DECLARE_MSM_GPIO_PINS (101 ); +DECLARE_MSM_GPIO_PINS (102 ); +DECLARE_MSM_GPIO_PINS (103 ); +DECLARE_MSM_GPIO_PINS (104 ); +DECLARE_MSM_GPIO_PINS (105 ); +DECLARE_MSM_GPIO_PINS (106 ); +DECLARE_MSM_GPIO_PINS (107 ); +DECLARE_MSM_GPIO_PINS (108 ); +DECLARE_MSM_GPIO_PINS (109 ); +DECLARE_MSM_GPIO_PINS (110 ); +DECLARE_MSM_GPIO_PINS (111 ); +DECLARE_MSM_GPIO_PINS (112 ); +DECLARE_MSM_GPIO_PINS (113 ); + +static const unsigned int sdc1_clk_pins[] = {114 }; +static const unsigned int sdc1_cmd_pins[] = {115 }; +static const unsigned int sdc1_data_pins[] = {116 }; +static const unsigned int sdc2_clk_pins[] = {117 }; +static const unsigned int sdc2_cmd_pins[] = {118 }; +static const unsigned int sdc2_data_pins[] = {119 }; +static const unsigned int sdc1_rclk_pins[] = {120 }; + +enum sdm660_functions { + msm_mux_blsp_spi1, + msm_mux_gpio, + msm_mux_blsp_uim1, + msm_mux_tgu_ch0, + msm_mux_qdss_gpio4, + msm_mux_atest_gpsadc1, + msm_mux_blsp_uart1, + msm_mux_phase_flag14, + msm_mux_blsp_i2c2, + msm_mux_phase_flag31, + msm_mux_blsp_spi3, + msm_mux_blsp_spi3_cs1, + msm_mux_blsp_spi3_cs2, + msm_mux_wlan1_adc1, + msm_mux_atest_usb13, + msm_mux_tgu_ch1, + msm_mux_qdss_gpio5, + msm_mux_atest_gpsadc0, + msm_mux_blsp_i2c1, + msm_mux_ddr_bist, + msm_mux_atest_tsens2, + msm_mux_atest_usb1, + msm_mux_blsp_spi2, + msm_mux_blsp_uim2, + msm_mux_phase_flag3, + msm_mux_bimc_dte1, + msm_mux_wlan1_adc0, + msm_mux_atest_usb12, + msm_mux_bimc_dte0, + msm_mux_blsp_i2c3, + msm_mux_wlan2_adc1, + msm_mux_atest_usb11, + msm_mux_dbg_out, + msm_mux_wlan2_adc0, + msm_mux_atest_usb10, + msm_mux_blsp_spi4, + msm_mux_pri_mi2s, + msm_mux_phase_flag26, + msm_mux_qdss_cti0_a, + msm_mux_qdss_cti0_b, + msm_mux_qdss_cti1_a, + msm_mux_qdss_cti1_b, + msm_mux_pri_mi2s_ws, + msm_mux_phase_flag27, + msm_mux_blsp_i2c4, + msm_mux_phase_flag28, + msm_mux_blsp_uart5, + msm_mux_blsp_spi5, + msm_mux_blsp_uim5, + msm_mux_phase_flag5, + msm_mux_blsp_i2c5, + msm_mux_blsp_spi6, + msm_mux_blsp_uart2, + msm_mux_blsp_uim6, + msm_mux_phase_flag11, + msm_mux_vsense_data0, + msm_mux_blsp_i2c6, + msm_mux_phase_flag12, + msm_mux_vsense_data1, + msm_mux_phase_flag13, + msm_mux_vsense_mode, + msm_mux_blsp_spi7, + msm_mux_blsp_uart6_a, + msm_mux_blsp_uart6_b, + msm_mux_sec_mi2s, + msm_mux_sndwire_clk, + msm_mux_phase_flag17, + msm_mux_vsense_clkout, + msm_mux_sndwire_data, + msm_mux_phase_flag18, + msm_mux_blsp_i2c7, + msm_mux_phase_flag19, + msm_mux_vfr_1, + msm_mux_phase_flag20, + msm_mux_blsp_spi8_cs1, + msm_mux_blsp_spi8_cs2, + msm_mux_m_voc, + msm_mux_phase_flag21, + msm_mux_phase_flag22, + msm_mux_blsp_i2c8_a, + msm_mux_blsp_i2c8_b, + msm_mux_phase_flag23, + msm_mux_pwr_modem, + msm_mux_phase_flag24, + msm_mux_qdss_gpio, + msm_mux_cam_mclk, + msm_mux_pwr_nav, + msm_mux_qdss_gpio0, + msm_mux_qspi_data0, + msm_mux_pwr_crypto, + msm_mux_qdss_gpio1, + msm_mux_qspi_data1, + msm_mux_agera_pll, + msm_mux_qdss_gpio2, + msm_mux_qspi_data2, + msm_mux_jitter_bist, + msm_mux_qdss_gpio3, + msm_mux_qdss_gpio7, + msm_mux_mdss_vsync0, + msm_mux_mdss_vsync1, + msm_mux_mdss_vsync2, + msm_mux_mdss_vsync3, + msm_mux_qdss_gpio9, + msm_mux_atest_usb2, + msm_mux_cci_i2c, + msm_mux_pll_bypassnl, + msm_mux_atest_tsens, + msm_mux_atest_usb21, + msm_mux_pll_reset, + msm_mux_atest_usb23, + msm_mux_qdss_gpio6, + msm_mux_qspi_cs, + msm_mux_qdss_gpio10, + msm_mux_qdss_gpio11, + msm_mux_cci_async, + msm_mux_qdss_gpio12, + msm_mux_qdss_gpio13, + msm_mux_qspi_clk, + msm_mux_phase_flag30, + msm_mux_qdss_gpio14, + msm_mux_qspi_resetn, + msm_mux_phase_flag1, + msm_mux_qdss_gpio15, + msm_mux_phase_flag2, + msm_mux_phase_flag9, + msm_mux_qspi_data3, + msm_mux_phase_flag15, + msm_mux_qdss_gpio8, + msm_mux_phase_flag16, + msm_mux_phase_flag6, + msm_mux_phase_flag29, + msm_mux_phase_flag25, + msm_mux_phase_flag10, + msm_mux_atest_usb20, + msm_mux_gcc_gp1, + msm_mux_phase_flag4, + msm_mux_atest_usb22, + msm_mux_gcc_gp2, + msm_mux_atest_char, + msm_mux_mdp_vsync, + msm_mux_gcc_gp3, + msm_mux_atest_char3, + msm_mux_cri_trng0, + msm_mux_atest_char2, + msm_mux_cri_trng1, + msm_mux_atest_char1, + msm_mux_audio_ref, + msm_mux_cri_trng, + msm_mux_atest_char0, + msm_mux_blsp_spi8_a, + msm_mux_blsp_spi8_b, + msm_mux_sp_cmu, + msm_mux_nav_pps_a, + msm_mux_nav_pps_b, + msm_mux_nav_pps_c, + msm_mux_gps_tx_a, + msm_mux_gps_tx_b, + msm_mux_gps_tx_c, + msm_mux_adsp_ext, + msm_mux_ssc_irq, + msm_mux_isense_dbg, + msm_mux_phase_flag0, + msm_mux_phase_flag7, + msm_mux_phase_flag8, + msm_mux_tsense_pwm1, + msm_mux_tsense_pwm2, + msm_mux_mss_lte, + msm_mux_uim2_data, + msm_mux_uim2_clk, + msm_mux_uim2_reset, + msm_mux_uim2_present, + msm_mux_uim1_data, + msm_mux_uim1_clk, + msm_mux_uim1_reset, + msm_mux_uim1_present, + msm_mux_uim_batt, + msm_mux_pa_indicator,drivers/pinctrl/qcom/pinctrl-sdm660.c line 527
Quoted 10 lines
drivers/pinctrl/qcom/pinctrl-sdm660.c new file +10
-0+ msm_mux_ldo_en, + msm_mux_ldo_update, + msm_mux_qlink_request, + msm_mux_qlink_enable, + msm_mux_prng_rosc, + msm_mux__, +}; + +static const char *const gpio_groups[] = { + "gpio0", "gpio1", "gpio2", "gpio3", "gpio4", "gpio5", "gpio6","gpio7",
drivers/pinctrl/qcom/pinctrl-sdm660.c line 529
Quoted 2 lines
drivers/pinctrl/qcom/pinctrl-sdm660.c new file +2
-0+"gpio8" ,"gpio9" ,"gpio10" ,"gpio11" ,"gpio12" ,"gpio13" ,"gpio14" , + "gpio15", "gpio16", "gpio17", "gpio18", "gpio19", "gpio20","gpio21",
drivers/pinctrl/qcom/pinctrl-sdm660.c line 530
Quoted 1 line
drivers/pinctrl/qcom/pinctrl-sdm660.c new file +1
-0+ "gpio22", "gpio23", "gpio24", "gpio25", "gpio26", "gpio27","gpio28",
drivers/pinctrl/qcom/pinctrl-sdm660.c line 531
Quoted 1 line
drivers/pinctrl/qcom/pinctrl-sdm660.c new file +1
-0+ "gpio29", "gpio30", "gpio31", "gpio32", "gpio33", "gpio34","gpio35",
drivers/pinctrl/qcom/pinctrl-sdm660.c line 532
Quoted 1 line
drivers/pinctrl/qcom/pinctrl-sdm660.c new file +1
-0+ "gpio36", "gpio37", "gpio38", "gpio39", "gpio40", "gpio41","gpio42",
drivers/pinctrl/qcom/pinctrl-sdm660.c line 533
Quoted 1 line
drivers/pinctrl/qcom/pinctrl-sdm660.c new file +1
-0+ "gpio43", "gpio44", "gpio45", "gpio46", "gpio47", "gpio48","gpio49",
drivers/pinctrl/qcom/pinctrl-sdm660.c line 534
Quoted 1 line
drivers/pinctrl/qcom/pinctrl-sdm660.c new file +1
-0+ "gpio50", "gpio51", "gpio52", "gpio53", "gpio54", "gpio55","gpio56",
drivers/pinctrl/qcom/pinctrl-sdm660.c line 535
Quoted 1 line
drivers/pinctrl/qcom/pinctrl-sdm660.c new file +1
-0+ "gpio57", "gpio58", "gpio59", "gpio60", "gpio61", "gpio62","gpio63",
drivers/pinctrl/qcom/pinctrl-sdm660.c line 536
Quoted 1 line
drivers/pinctrl/qcom/pinctrl-sdm660.c new file +1
-0+ "gpio64", "gpio65", "gpio66", "gpio67", "gpio68", "gpio69","gpio70",
drivers/pinctrl/qcom/pinctrl-sdm660.c line 537
Quoted 1 line
drivers/pinctrl/qcom/pinctrl-sdm660.c new file +1
-0+ "gpio71", "gpio72", "gpio73", "gpio74", "gpio75", "gpio76","gpio77",
drivers/pinctrl/qcom/pinctrl-sdm660.c line 538
Quoted 1 line
drivers/pinctrl/qcom/pinctrl-sdm660.c new file +1
-0+ "gpio78", "gpio79", "gpio80", "gpio81", "gpio82", "gpio83","gpio84",
drivers/pinctrl/qcom/pinctrl-sdm660.c line 539
Quoted 1 line
drivers/pinctrl/qcom/pinctrl-sdm660.c new file +1
-0+ "gpio85", "gpio86", "gpio87", "gpio88", "gpio89", "gpio90","gpio91",
drivers/pinctrl/qcom/pinctrl-sdm660.c line 540
Quoted 1 line
drivers/pinctrl/qcom/pinctrl-sdm660.c new file +1
-0+ "gpio92", "gpio93", "gpio94", "gpio95", "gpio96", "gpio97","gpio98",
Quoted 164 lines
drivers/pinctrl/qcom/pinctrl-sdm660.c new file +164
-0+"gpio99" ,"gpio100" ,"gpio101" ,"gpio102" ,"gpio103" ,"gpio104" , +"gpio105" ,"gpio106" ,"gpio107" ,"gpio108" ,"gpio109" ,"gpio110" , + "gpio111", "gpio112", "gpio113", +}; +static const char *const blsp_spi1_groups[] = { +"gpio0" ,"gpio1" ,"gpio2" ,"gpio3" ,"gpio46" , +}; +static const char *const blsp_uim1_groups[] = { +"gpio0" ,"gpio1" , +}; +static const char *const tgu_ch0_groups[] = { +"gpio0" , +}; +static const char *const qdss_gpio4_groups[] = { +"gpio0" ,"gpio36" , +}; +static const char *const atest_gpsadc1_groups[] = { +"gpio0" , +}; +static const char *const blsp_uart1_groups[] = { +"gpio0" ,"gpio1" ,"gpio2" ,"gpio3" , +}; +static const char *const phase_flag14_groups[] = { +"gpio5" , +}; +static const char *const blsp_i2c2_groups[] = { +"gpio6" ,"gpio7" , +}; +static const char *const phase_flag31_groups[] = { +"gpio6" , +}; +static const char *const blsp_spi3_groups[] = { +"gpio8" ,"gpio9" ,"gpio10" ,"gpio11" , +}; +static const char *const blsp_spi3_cs1_groups[] = { +"gpio30" , +}; +static const char *const blsp_spi3_cs2_groups[] = { +"gpio65" , +}; +static const char *const wlan1_adc1_groups[] = { +"gpio8" , +}; +static const char *const atest_usb13_groups[] = { +"gpio8" , +}; +static const char *const tgu_ch1_groups[] = { +"gpio1" , +}; +static const char *const qdss_gpio5_groups[] = { +"gpio1" ,"gpio37" , +}; +static const char *const atest_gpsadc0_groups[] = { +"gpio1" , +}; +static const char *const blsp_i2c1_groups[] = { +"gpio2" ,"gpio3" , +}; +static const char *const ddr_bist_groups[] = { +"gpio3" ,"gpio8" ,"gpio9" ,"gpio10" , +}; +static const char *const atest_tsens2_groups[] = { +"gpio3" , +}; +static const char *const atest_usb1_groups[] = { +"gpio3" , +}; +static const char *const blsp_spi2_groups[] = { +"gpio4" ,"gpio5" ,"gpio6" ,"gpio7" , +}; +static const char *const blsp_uim2_groups[] = { +"gpio4" ,"gpio5" , +}; +static const char *const phase_flag3_groups[] = { +"gpio4" , +}; +static const char *const bimc_dte1_groups[] = { +"gpio8" ,"gpio10" , +}; +static const char *const wlan1_adc0_groups[] = { +"gpio9" , +}; +static const char *const atest_usb12_groups[] = { +"gpio9" , +}; +static const char *const bimc_dte0_groups[] = { +"gpio9" ,"gpio11" , +}; +static const char *const blsp_i2c3_groups[] = { +"gpio10" ,"gpio11" , +}; +static const char *const wlan2_adc1_groups[] = { +"gpio10" , +}; +static const char *const atest_usb11_groups[] = { +"gpio10" , +}; +static const char *const dbg_out_groups[] = { +"gpio11" , +}; +static const char *const wlan2_adc0_groups[] = { +"gpio11" , +}; +static const char *const atest_usb10_groups[] = { +"gpio11" , +}; +static const char *const RCM_MARKER_groups[] = { +"gpio12" ,"gpio13" , +}; +static const char *const blsp_spi4_groups[] = { +"gpio12" ,"gpio13" ,"gpio14" ,"gpio15" , +}; +static const char *const pri_mi2s_groups[] = { +"gpio12" ,"gpio14" ,"gpio15" ,"gpio61" , +}; +static const char *const phase_flag26_groups[] = { +"gpio12" , +}; +static const char *const qdss_cti0_a_groups[] = { +"gpio49" ,"gpio50" , +}; +static const char *const qdss_cti0_b_groups[] = { +"gpio13" ,"gpio21" , +}; +static const char *const qdss_cti1_a_groups[] = { +"gpio53" ,"gpio55" , +}; +static const char *const qdss_cti1_b_groups[] = { +"gpio12" ,"gpio66" , +}; +static const char *const pri_mi2s_ws_groups[] = { +"gpio13" , +}; +static const char *const phase_flag27_groups[] = { +"gpio13" , +}; +static const char *const blsp_i2c4_groups[] = { +"gpio14" ,"gpio15" , +}; +static const char *const phase_flag28_groups[] = { +"gpio14" , +}; +static const char *const blsp_uart5_groups[] = { +"gpio16" ,"gpio17" ,"gpio18" ,"gpio19" , +}; +static const char *const blsp_spi5_groups[] = { +"gpio16" ,"gpio17" ,"gpio18" ,"gpio19" , +}; +static const char *const blsp_uim5_groups[] = { +"gpio16" ,"gpio17" , +}; +static const char *const phase_flag5_groups[] = { +"gpio17" , +}; +static const char *const blsp_i2c5_groups[] = { +"gpio18" ,"gpio19" , +}; +static const char *const blsp_spi6_groups[] = { +"gpio49" ,"gpio52" ,"gpio22" ,"gpio23" , +}; +static const char *const blsp_uart2_groups[] = { +"gpio4" ,"gpio5" ,"gpio6" ,"gpio7" , +}; +static const char *const blsp_uim6_groups[]
Quoted 4 lines · Craig Tatlor
Add initial pinctrl driver to support pin configuration with pinctrl framework for sdm660.
Based off CAF implementation.
Quoted 8 lines
Signed-off-by Craig Tatlor <[email protected]>---
Changes from v1:
Adds gpio-ranges property to bindings.../bindings/pinctrl/qcom,sdm660-pinctrl.txt | 202 +++
As the DT binding part of the patch is significant, please split it into its own patch.
Quoted 8 lines
drivers/pinctrl/qcom/Kconfig | 10 + drivers/pinctrl/qcom/Makefile | 1 + drivers/pinctrl/qcom/pinctrl-sdm660.c | 1451 +++++++++++++++++ 4 files changed, 1663 insertions(+) create mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt create mode 100644 drivers/pinctrl/qcom/pinctrl-sdm660.cDocumentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt +0
-0
[..]
Quoted 44 lines
+- function:
Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt +43
-0+ Usage: required + Value type: <string> + Definition: Specify the alternative function to be configured for the + specified pins. Functions are only valid for gpio pins. + Valid values are: + + blsp_uart1, blsp_spi1, blsp_i2c1, blsp_uim1, atest_tsens, + bimc_dte1, dac_calib0, blsp_spi8, blsp_uart8, blsp_uim8, + qdss_cti_trig_out_b, bimc_dte0, dac_calib1, qdss_cti_trig_in_b, + dac_calib2, atest_tsens2, atest_usb1, blsp_spi10, blsp_uart10, + blsp_uim10, atest_bbrx1, atest_usb13, atest_bbrx0, atest_usb12, + mdp_vsync, edp_lcd, blsp_i2c10, atest_gpsadc1, atest_usb11, + atest_gpsadc0, edp_hot, atest_usb10, m_voc, dac_gpio, atest_char, + cam_mclk, pll_bypassnl, qdss_stm7, blsp_i2c8, qdss_tracedata_b, + pll_reset, qdss_stm6, qdss_stm5, qdss_stm4, atest_usb2, cci_i2c, + qdss_stm3, dac_calib3, atest_usb23, atest_char3, dac_calib4, + qdss_stm2, atest_usb22, atest_char2, qdss_stm1, dac_calib5, + atest_usb21, atest_char1, dbg_out, qdss_stm0, dac_calib6, + atest_usb20, atest_char0, dac_calib10, qdss_stm10, + qdss_cti_trig_in_a, cci_timer4, blsp_spi6, blsp_uart6, blsp_uim6, + blsp2_spi, qdss_stm9, qdss_cti_trig_out_a, dac_calib11, + qdss_stm8, cci_timer0, qdss_stm13, dac_calib7, cci_timer1, + qdss_stm12, dac_calib8, cci_timer2, blsp1_spi, qdss_stm11, + dac_calib9, cci_timer3, cci_async, dac_calib12, blsp_i2c6, + qdss_tracectl_a, dac_calib13, qdss_traceclk_a, dac_calib14, + dac_calib15, hdmi_rcv, dac_calib16, hdmi_cec, pwr_modem, + dac_calib17, hdmi_ddc, pwr_nav, dac_calib18, pwr_crypto, + dac_calib19, hdmi_hot, dac_calib20, dac_calib21, pci_e0, + dac_calib22, dac_calib23, dac_calib24, tsif1_sync, dac_calib25, + sd_write, tsif1_error, blsp_spi2, blsp_uart2, blsp_uim2, + qdss_cti, blsp_i2c2, blsp_spi3, blsp_uart3, blsp_uim3, blsp_i2c3, + uim3, blsp_spi9, blsp_uart9, blsp_uim9, blsp10_spi, blsp_i2c9, + blsp_spi7, blsp_uart7, blsp_uim7, qdss_tracedata_a, blsp_i2c7, + qua_mi2s, gcc_gp1_clk_a, ssc_irq, uim4, blsp_spi11, blsp_uart11, + blsp_uim11, gcc_gp2_clk_a, gcc_gp3_clk_a, blsp_i2c11, cri_trng0, + cri_trng1, cri_trng, qdss_stm18, pri_mi2s, qdss_stm17, blsp_spi4, + blsp_uart4, blsp_uim4, qdss_stm16, qdss_stm15, blsp_i2c4, + qdss_stm14, dac_calib26, spkr_i2s, audio_ref, lpass_slimbus, + isense_dbg, tsense_pwm1, tsense_pwm2, btfm_slimbus, ter_mi2s, + qdss_stm22, qdss_stm21, qdss_stm20, qdss_stm19, gcc_gp1_clk_b, + sec_mi2s, blsp_spi5, blsp_uart5, blsp_uim5, gcc_gp2_clk_b, + gcc_gp3_clk_b, blsp_i2c5, blsp_spi12, blsp_uart12, blsp_uim12, + qdss_stm25, qdss_stm31, blsp_i2c12, qdss_stm30, qdss_stm29,
Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt line 141
Quoted 10 lines
Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt +10
-0+ tsif1_clk, qdss_stm28, tsif1_en, tsif1_data, sdc4_cmd, qdss_stm27, + qdss_traceclk_b, tsif2_error, sdc43, vfr_1, qdss_stm26, tsif2_clk, + sdc4_clk, qdss_stm24, tsif2_en, sdc42, qdss_stm23, qdss_tracectl_b, + sd_card, tsif2_data, sdc41, tsif2_sync, sdc40, mdp_vsync_p_b, + ldo_en, mdp_vsync_s_b, ldo_update, blsp11_uart_tx_b, blsp11_uart_rx_b, + blsp11_i2c_sda_b, prng_rosc, blsp11_i2c_scl_b, uim2, uim1, uim_batt, + pci_e2, pa_indicator, adsp_ext, ddr_bist, qdss_tracedata_11, + qdss_tracedata_12, modem_tsync, nav_dr, nav_pps, pci_e1, gsm_tx, + qspi_cs, ssbi2, ssbi1, mss_lte, qspi_clk, qspi0, qspi1, qspi2, qspi3, + gpio
Please review this list, there are a few items in here that are not valid functions in your driver.
[..]
Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt line 183
Quoted 7 lines
Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt +7
-0+ +Example: + + tlmm: pinctrl@1010000 { + compatible = "qcom,sdm660-pinctrl"; + reg = <0x1010000 0x300000>; + interrupts = <0 208 0>;
Replace the 0s in the interrupts specifier.
Quoted 8 lines
Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt +8
-0+ gpio-controller; + gpio-ranges = <&tlmm 0 0 114>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + + uart_console_active: uart_console_active { + mux {
Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt line 201
Quoted 10 lines
Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt +10
-0+ pins = "gpio4", "gpio5"; + function = "blsp_uart8"; + }; + + config { + pins = "gpio4", "gpio5"; + drive-strength = <2>; + bias-disable; + }; + };
This example isn't valid. Please update it, or just drop the pinctrl state from the example.
Quoted 9 lines
Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt +1
-0+ };drivers/pinctrl/qcom/Kconfig +0
-0@@ -147,6 +147,16 @@ config PINCTRL_QCOM_SSBI_PMIC which are using SSBI for communication with SoC. Example PMIC's devices are pm8058 and pm8921.
drivers/pinctrl/qcom/Kconfig config PINCTRL_QCOM_SSBI_PMIC · line 159
Quoted 10 lines
drivers/pinctrl/qcom/Kconfig +10
-0+config PINCTRL_SDM660 + tristate "Qualcomm Technologies Inc SDM660 pin controller driver" + depends on GPIOLIB && OF + select PINCTRL_MSM + help + This is the pinctrl, pinmux, pinconf and gpiolib driver for the + Qualcomm Technologies Inc TLMM block found on the Qualcomm + Technologies Inc SDM660 platform. + +
Extra empty line.
Quoted 25 lines
drivers/pinctrl/qcom/Kconfig +0
-0config PINCTRL_SDM845 tristate "Qualcomm Technologies Inc SDM845 pin controller driver" depends on GPIOLIB && OFdrivers/pinctrl/qcom/Makefile +1
-0@@ -19,4 +19,5 @@ obj-$(CONFIG_PINCTRL_QCOM_SPMI_PMIC) += pinctrl-spmi-gpio.o obj-$(CONFIG_PINCTRL_QCOM_SPMI_PMIC) += pinctrl-spmi-mpp.o obj-$(CONFIG_PINCTRL_QCOM_SSBI_PMIC) += pinctrl-ssbi-gpio.o obj-$(CONFIG_PINCTRL_QCOM_SSBI_PMIC) += pinctrl-ssbi-mpp.o +obj-$(CONFIG_PINCTRL_SDM660) += pinctrl-sdm660.o obj-$(CONFIG_PINCTRL_SDM845) += pinctrl-sdm845.odrivers/pinctrl/qcom/pinctrl-sdm660.c new file +6
-0@@ -0,0 +1,1451 @@ +// SPDX-License-Identifier: GPL-2.0 +/* +* Copyright (c) 2016, The Linux Foundation. All rights reserved. +* Copyright (c) 2018, Craig Tatlor. +*/ +
drivers/pinctrl/qcom/pinctrl-sdm660.c line 16
Quoted 10 lines
drivers/pinctrl/qcom/pinctrl-sdm660.c new file +10
-0+#include <linux/module.h> +#include <linux/of.h> +#include <linux/platform_device.h> +#include <linux/pinctrl/pinctrl.h> + +#include "pinctrl-msm.h" + +#define NORTH 0x00900000 +#define CENTER 0x00500000 +#define SOUTH 0x00100000
Please respin this on top of the QCS404 series, where we describe each tile explicitly in DT.
The three regions are:
South: 0x03100000 size 0x300000 Center: 0x03500000 size 0x300000 North: 0x03900000 size 0x300000
[..]
drivers/pinctrl/qcom/pinctrl-sdm660.c line 338
Quoted 7 lines
drivers/pinctrl/qcom/pinctrl-sdm660.c new file +7
-0+static const unsigned int sdc1_clk_pins[] = {114 }; +static const unsigned int sdc1_cmd_pins[] = {115 }; +static const unsigned int sdc1_data_pins[] = {116 }; +static const unsigned int sdc2_clk_pins[] = {117 }; +static const unsigned int sdc2_cmd_pins[] = {118 }; +static const unsigned int sdc2_data_pins[] = {119 }; +static const unsigned int sdc1_rclk_pins[] = {120 };
The numbering of these "fake" pins isn't significant, so please reorder sdc1_rclk to follow the other sdc1 pins.
drivers/pinctrl/qcom/pinctrl-sdm660.c line 341
Quoted 3 lines
drivers/pinctrl/qcom/pinctrl-sdm660.c new file +3
-0+ +enum sdm660_functions { + msm_mux_blsp_spi1,
There's no harm in sorting this list, but it makes it easier to read.
drivers/pinctrl/qcom/pinctrl-sdm660.c line 1100
Quoted 3 lines
drivers/pinctrl/qcom/pinctrl-sdm660.c new file +3
-0+ +static const struct msm_function sdm660_functions[] = { +FUNCTION (blsp_spi1),
Ditto.
[..]
Quoted 1 line
+static const struct
msm_pingroupsdm660_groups[] = {
[..]
drivers/pinctrl/qcom/pinctrl-sdm660.c line 1405
Quoted 7 lines
drivers/pinctrl/qcom/pinctrl-sdm660.c new file +7
-0+SDC_QDSD_PINGROUP (sdc1_clk,0x99a000 ,13 ,6 ), +SDC_QDSD_PINGROUP (sdc1_cmd,0x99a000 ,11 ,3 ), +SDC_QDSD_PINGROUP (sdc1_data,0x99a000 ,9 ,0 ), +SDC_QDSD_PINGROUP (sdc2_clk,0x99b000 ,14 ,6 ), +SDC_QDSD_PINGROUP (sdc2_cmd,0x99b000 ,11 ,3 ), +SDC_QDSD_PINGROUP (sdc2_data,0x99b000 ,9 ,0 ), + SDC_QDSD_PINGROUP(sdc1_rclk, 0x99a000, 15, 0),
Move the sdc1_rclk up to the other sdc1 groups.
Quoted 1 line
+};
Regards,
Bjorn
Quoted 13 lines · Bjorn Andersson
Quoted 11 lines · Craig Tatlor
Add initial pinctrl driver to support pin configuration with pinctrl framework for sdm660.
Based off CAF implementation.Signed-off-by Craig Tatlor <[email protected]>---
Changes from v1:
Adds gpio-ranges property to bindings
Quoted 6 lines
Quoted 1 line
.../bindings/pinctrl/qcom,sdm660-pinctrl.txt | 202 +++As the DT binding part of the patch is significant, please split it into
its own patch.
Right
Quoted 83 lines
Quoted 3 lines
drivers/pinctrl/qcom/Kconfig | 10 + drivers/pinctrl/qcom/Makefile | 1 + drivers/pinctrl/qcom/pinctrl-sdm660.c | 1451+++++++++++++++++
Quoted 2 lines
4 files changed, 1663 insertions(+) create mode 100644
Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txtQuoted 3 lines
create mode 100644 drivers/pinctrl/qcom/pinctrl-sdm660.cdiff --git
a/Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txtb/Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt[..]Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt
Quoted 4 lines
+- function:
Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt new file +3
-0+ Usage: required + Value type: <string> + Definition: Specify the alternative function to be configured forthe
Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt
Quoted 6 lines
Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt new file +6
-0+ specified pins. Functions are only valid for gpio pins. + Valid values are: + + blsp_uart1, blsp_spi1, blsp_i2c1, blsp_uim1, atest_tsens, + bimc_dte1, dac_calib0, blsp_spi8, blsp_uart8, blsp_uim8, + qdss_cti_trig_out_b, bimc_dte0, dac_calib1,
qdss_cti_trig_in_b,Review
Quoted 2 lines
(quoted diff) +2
-0+ dac_calib2, atest_tsens2, atest_usb1, blsp_spi10, blsp_uart10, + blsp_uim10, atest_bbrx1, atest_usb13, atest_bbrx0,
atest_usb12,Review
Quoted 2 lines
(quoted diff) +2
-0+ mdp_vsync, edp_lcd, blsp_i2c10, atest_gpsadc1, atest_usb11, + atest_gpsadc0, edp_hot, atest_usb10, m_voc, dac_gpio,
atest_char,Review
Quoted 1 line
(quoted diff) +1
-0+ cam_mclk, pll_bypassnl, qdss_stm7, blsp_i2c8,
qdss_tracedata_b,Review
Quoted 1 line
(quoted diff) +1
-0+ pll_reset, qdss_stm6, qdss_stm5, qdss_stm4, atest_usb2,
cci_i2c,Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt
Quoted 5 lines
Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt new file +5
-0+ qdss_stm3, dac_calib3, atest_usb23, atest_char3, dac_calib4, + qdss_stm2, atest_usb22, atest_char2, qdss_stm1, dac_calib5, + atest_usb21, atest_char1, dbg_out, qdss_stm0, dac_calib6, + atest_usb20, atest_char0, dac_calib10, qdss_stm10, + qdss_cti_trig_in_a, cci_timer4, blsp_spi6, blsp_uart6,
blsp_uim6,Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt
Quoted 9 lines
Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt new file +9
-0+ blsp2_spi, qdss_stm9, qdss_cti_trig_out_a, dac_calib11, + qdss_stm8, cci_timer0, qdss_stm13, dac_calib7, cci_timer1, + qdss_stm12, dac_calib8, cci_timer2, blsp1_spi, qdss_stm11, + dac_calib9, cci_timer3, cci_async, dac_calib12, blsp_i2c6, + qdss_tracectl_a, dac_calib13, qdss_traceclk_a, dac_calib14, + dac_calib15, hdmi_rcv, dac_calib16, hdmi_cec, pwr_modem, + dac_calib17, hdmi_ddc, pwr_nav, dac_calib18, pwr_crypto, + dac_calib19, hdmi_hot, dac_calib20, dac_calib21, pci_e0, + dac_calib22, dac_calib23, dac_calib24, tsif1_sync,
dac_calib25,Review
Quoted 2 lines
(quoted diff) +2
-0+ sd_write, tsif1_error, blsp_spi2, blsp_uart2, blsp_uim2, + qdss_cti, blsp_i2c2, blsp_spi3, blsp_uart3, blsp_uim3,
blsp_i2c3,Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt
Quoted 3 lines
Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt new file +3
-0+ uim3, blsp_spi9, blsp_uart9, blsp_uim9, blsp10_spi, blsp_i2c9, + blsp_spi7, blsp_uart7, blsp_uim7, qdss_tracedata_a, blsp_i2c7, + qua_mi2s, gcc_gp1_clk_a, ssc_irq, uim4, blsp_spi11,
blsp_uart11,Review
Quoted 1 line
(quoted diff) +1
-0+ blsp_uim11, gcc_gp2_clk_a, gcc_gp3_clk_a, blsp_i2c11,
cri_trng0,Review
Quoted 1 line
(quoted diff) +1
-0+ cri_trng1, cri_trng, qdss_stm18, pri_mi2s, qdss_stm17,
blsp_spi4,Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt
Quoted 8 lines
Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt new file +8
-0+ blsp_uart4, blsp_uim4, qdss_stm16, qdss_stm15, blsp_i2c4, + qdss_stm14, dac_calib26, spkr_i2s, audio_ref, lpass_slimbus, + isense_dbg, tsense_pwm1, tsense_pwm2, btfm_slimbus, ter_mi2s, + qdss_stm22, qdss_stm21, qdss_stm20, qdss_stm19, gcc_gp1_clk_b, + sec_mi2s, blsp_spi5, blsp_uart5, blsp_uim5, gcc_gp2_clk_b, + gcc_gp3_clk_b, blsp_i2c5, blsp_spi12, blsp_uart12, blsp_uim12, + qdss_stm25, qdss_stm31, blsp_i2c12, qdss_stm30, qdss_stm29, + tsif1_clk, qdss_stm28, tsif1_en, tsif1_data, sdc4_cmd,
qdss_stm27,Review
Quoted 1 line
(quoted diff) +1
-0+ qdss_traceclk_b, tsif2_error, sdc43, vfr_1, qdss_stm26,
tsif2_clk,Review
Quoted 1 line
(quoted diff) +1
-0+ sdc4_clk, qdss_stm24, tsif2_en, sdc42, qdss_stm23,
qdss_tracectl_b,Review
Quoted 2 lines
(quoted diff) +2
-0+ sd_card, tsif2_data, sdc41, tsif2_sync, sdc40, mdp_vsync_p_b, + ldo_en, mdp_vsync_s_b, ldo_update, blsp11_uart_tx_b,
blsp11_uart_rx_b,Review
Quoted 1 line
(quoted diff) +1
-0+ blsp11_i2c_sda_b, prng_rosc, blsp11_i2c_scl_b, uim2, uim1,
uim_batt,Review
Quoted 2 lines
(quoted diff) +2
-0+ pci_e2, pa_indicator, adsp_ext, ddr_bist, qdss_tracedata_11, + qdss_tracedata_12, modem_tsync, nav_dr, nav_pps, pci_e1,
gsm_tx,
Quoted 7 lines
Review
Quoted 1 line
(quoted diff) +1
-0+ qspi_cs, ssbi2, ssbi1, mss_lte, qspi_clk, qspi0, qspi1, qspi2,qspi3,
Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt line 141
Quoted 1 line
Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt new file +1
-0+ gpioPlease review this list, there are a few items in here that are not valid functions in your driver.
Okay, will do
Quoted 10 lines
[..]
Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt line 183
Quoted 7 lines
Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt new file +7
-0+ +Example: + + tlmm: pinctrl@1010000 { + compatible = "qcom,sdm660-pinctrl"; + reg = <0x1010000 0x300000>; + interrupts = <0 208 0>;Replace the 0s in the interrupts specifier.
Okay
Quoted 14 lines
Quoted 14 lines
Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt new file +13
-0+ gpio-controller; + gpio-ranges = <&tlmm 0 0 114>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + + uart_console_active: uart_console_active { + mux { + pins = "gpio4", "gpio5"; + function = "blsp_uart8"; + }; + + config {
Quoted 9 lines
Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt line 201
Quoted 5 lines
Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt new file +5
-0+ pins = "gpio4", "gpio5"; + drive-strength = <2>; + bias-disable; + }; + };This example isn't valid. Please update it, or just drop the pinctrl state from the example.
Right, will drop it
Quoted 18 lines
Review
Quoted 2 lines
(quoted diff) +1
-0+ };(quoted diff) +0
-0b/drivers/pinctrl/qcom/Kconfig
drivers/pinctrl/qcom/Kconfig config PINCTRL_QCOM_SSBI_PMIC · line 147
Quoted 5 lines
index 195492033075..091beadb8a1c 100644
drivers/pinctrl/qcom/Kconfig +0
-0@@ -147,6 +147,16 @@ config PINCTRL_QCOM_SSBI_PMIC which are using SSBI for communication with SoC. ExamplePMIC's
drivers/pinctrl/qcom/Kconfig config PINCTRL_QCOM_SSBI_PMIC
Quoted 4 lines
drivers/pinctrl/qcom/Kconfig +2
-0devices are pm8058 and pm8921. +config PINCTRL_SDM660 + tristate "Qualcomm Technologies Inc SDM660 pin controllerdriver"
drivers/pinctrl/qcom/Kconfig config PINCTRL_QCOM_SSBI_PMIC
Quoted 4 lines
drivers/pinctrl/qcom/Kconfig +4
-0+ depends on GPIOLIB && OF + select PINCTRL_MSM + help + This is the pinctrl, pinmux, pinconf and gpiolib driver for
Quoted 7 lines
the
drivers/pinctrl/qcom/Kconfig config PINCTRL_QCOM_SSBI_PMIC · line 159
Quoted 4 lines
drivers/pinctrl/qcom/Kconfig +4
-0+ Qualcomm Technologies Inc TLMM block found on the Qualcomm + Technologies Inc SDM660 platform. + +Extra empty line
Yeah
Quoted 44 lines
drivers/pinctrl/qcom/Kconfig config PINCTRL_QCOM_SSBI_PMIC · line 161
Quoted 3 lines
drivers/pinctrl/qcom/Kconfig +0
-0config PINCTRL_SDM845 tristate "Qualcomm Technologies Inc SDM845 pin controllerdriver"
Review
Quoted 2 lines
drivers/pinctrl/qcom/Kconfig +0
-0depends on GPIOLIB && OF(quoted diff) +0
-0b/drivers/pinctrl/qcom/Makefile
drivers/pinctrl/qcom/Makefile obj-$(CONFIG_PINCTRL_QCOM_SPMI_PMIC) +=
Quoted 4 lines
index
0c6f3ddc296d..9b08808a2f1c100644drivers/pinctrl/qcom/Makefile +0
-0@@ -19,4 +19,5 @@ obj-$(CONFIG_PINCTRL_QCOM_SPMI_PMIC) +=pinctrl-spmi-gpio.o
Review
Quoted 6 lines
drivers/pinctrl/qcom/Makefile +1
-0obj-$(CONFIG_PINCTRL_QCOM_SPMI_PMIC) += pinctrl-spmi-mpp.o obj-$(CONFIG_PINCTRL_QCOM_SSBI_PMIC) += pinctrl-ssbi-gpio.o obj-$(CONFIG_PINCTRL_QCOM_SSBI_PMIC) += pinctrl-ssbi-mpp.o +obj-$(CONFIG_PINCTRL_SDM660) += pinctrl-sdm660.o obj-$(CONFIG_PINCTRL_SDM845) += pinctrl-sdm845.o(quoted diff) +0
-0
b/drivers/pinctrl/qcom/pinctrl-sdm660.cQuoted 11 lines
new file mode 100644
index 000000000000..ded56111f168drivers/pinctrl/qcom/pinctrl-sdm660.c new file +6
-0@@ -0,0 +1,1451 @@ +// SPDX-License-Identifier: GPL-2.0 +/* +* Copyright (c) 2016, The Linux Foundation. All rights reserved. +* Copyright (c) 2018, Craig Tatlor. +*/ +drivers/pinctrl/qcom/pinctrl-sdm660.c line 16
Quoted 10 lines
drivers/pinctrl/qcom/pinctrl-sdm660.c new file +10
-0+#include <linux/module.h> +#include <linux/of.h> +#include <linux/platform_device.h> +#include <linux/pinctrl/pinctrl.h> + +#include "pinctrl-msm.h" + +#define NORTH 0x00900000 +#define CENTER 0x00500000 +#define SOUTH 0x00100000Please respin this on top of the QCS404 series, where we describe each tile explicitly in DT.
Quoted 5 lines
The three regions are:
South: 0x03100000 size 0x300000 Center: 0x03500000 size 0x300000 North: 0x03900000 size 0x300000
Right, will do
Quoted 12 lines
[..]
drivers/pinctrl/qcom/pinctrl-sdm660.c line 338
Quoted 7 lines
drivers/pinctrl/qcom/pinctrl-sdm660.c new file +7
-0+static const unsigned int sdc1_clk_pins[] = {114 }; +static const unsigned int sdc1_cmd_pins[] = {115 }; +static const unsigned int sdc1_data_pins[] = {116 }; +static const unsigned int sdc2_clk_pins[] = {117 }; +static const unsigned int sdc2_cmd_pins[] = {118 }; +static const unsigned int sdc2_data_pins[] = {119 }; +static const unsigned int sdc1_rclk_pins[] = {120 };The numbering of these "fake" pins isn't significant, so please reorder
sdc1_rclkto follow the other sdc1 pins.
Yup
Quoted 7 lines
drivers/pinctrl/qcom/pinctrl-sdm660.c line 341
Quoted 4 lines
drivers/pinctrl/qcom/pinctrl-sdm660.c new file +3
-0+ +enum sdm660_functions { + msm_mux_blsp_spi1,There's no harm in sorting this list, but it makes it easier to read.
Quoted 1 line
+
Okay, will do, alphabetically I guess?
Quoted 8 lines
drivers/pinctrl/qcom/pinctrl-sdm660.c line 1100
Quoted 2 lines
drivers/pinctrl/qcom/pinctrl-sdm660.c new file +2
-0+static const struct msm_function sdm660_functions[] = { +FUNCTION (blsp_spi1),Ditto.
[..]
Quoted 1 line
+static const struct
msm_pingroupsdm660_groups[] = {[..]
Quoted 9 lines
drivers/pinctrl/qcom/pinctrl-sdm660.c line 1405
Quoted 7 lines
drivers/pinctrl/qcom/pinctrl-sdm660.c new file +7
-0+SDC_QDSD_PINGROUP (sdc1_clk,0x99a000 ,13 ,6 ), +SDC_QDSD_PINGROUP (sdc1_cmd,0x99a000 ,11 ,3 ), +SDC_QDSD_PINGROUP (sdc1_data,0x99a000 ,9 ,0 ), +SDC_QDSD_PINGROUP (sdc2_clk,0x99b000 ,14 ,6 ), +SDC_QDSD_PINGROUP (sdc2_cmd,0x99b000 ,11 ,3 ), +SDC_QDSD_PINGROUP (sdc2_data,0x99b000 ,9 ,0 ), + SDC_QDSD_PINGROUP(sdc1_rclk, 0x99a000, 15, 0),Move the
sdc1_rclkup to the other sdc1 groups.
Right
Quoted 5 lines
Quoted 2 lines
+};
Regards,
Bjorn
PATCH v3 1/2 pinctrl: qcom: Add sdm660 pinctrl driver
In reply to Craig TatlorFrom: Neeraj Upadhyay <[email protected]>
Add initial pinctrl driver to support pin configuration with pinctrl framework for sdm660.
Based off CAF implementation.
--- drivers/pinctrl/qcom/Kconfig | 9 + drivers/pinctrl/qcom/Makefile | 1 + drivers/pinctrl/qcom/pinctrl-sdm660.c | 1455 +++++++++++++++++++++++++ 3 files changed, 1465 insertions(+) create mode 100644 drivers/pinctrl/qcom/pinctrl-sdm660.c
Changes from V2:
Sort everything
Use tiles
Add sdm630 compatible
drivers/pinctrl/qcom/Kconfig +9 -0
@@ -155,6 +155,15 @@ config PINCTRL_QCOM_SSBI_PMIC which are using SSBI for communication with SoC. Example PMIC's devices are pm8058 and pm8921. +config PINCTRL_SDM660 + tristate "Qualcomm Technologies Inc SDM660 pin controller driver" + depends on GPIOLIB && OF + select PINCTRL_MSM + help + This is the pinctrl, pinmux, pinconf and gpiolib driver for the + Qualcomm Technologies Inc TLMM block found on the Qualcomm + Technologies Inc SDM660 platform. + config PINCTRL_SDM845 tristate "Qualcomm Technologies Inc SDM845 pin controller driver" depends on GPIOLIB && OF
drivers/pinctrl/qcom/Makefile +1 -0
@@ -20,4 +20,5 @@ obj-$(CONFIG_PINCTRL_QCOM_SPMI_PMIC) += pinctrl-spmi-gpio.o obj-$(CONFIG_PINCTRL_QCOM_SPMI_PMIC) += pinctrl-spmi-mpp.o obj-$(CONFIG_PINCTRL_QCOM_SSBI_PMIC) += pinctrl-ssbi-gpio.o obj-$(CONFIG_PINCTRL_QCOM_SSBI_PMIC) += pinctrl-ssbi-mpp.o +obj-$(CONFIG_PINCTRL_SDM660) += pinctrl-sdm660.o obj-$(CONFIG_PINCTRL_SDM845) += pinctrl-sdm845.o
drivers/pinctrl/qcom/pinctrl-sdm660.c new file +1455 -0
1,455 lines not on this page · raw message
Signature · 1 line
2.18.0
PATCH v3 2/2 dt-bindings: pinctrl: qcom: Add SDM660 pinctrl binding
Add the binding for the TLMM pinctrl block found in the SDM660 platform.
--- .../bindings/pinctrl/qcom,sdm660-pinctrl.txt | 181 ++++++++++++++++++ 1 file changed, 181 insertions(+) create mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt
Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt new file +181 -0
@@ -0,0 +1,181 @@ +Qualcomm Technologies, Inc. SDM660 TLMM block + +This binding describes the Top Level Mode Multiplexer block found in the +SDM660 platform. + +- compatible: + Usage: required + Value type: <string> + Definition: must be "qcom,sdm660-pinctrl" or + "qcom,sdm630-pinctrl". + +- reg: + Usage: required + Value type: <prop-encoded-array> + Definition: the base address and size of the TLMM register space. + +- interrupts: + Usage: required + Value type: <prop-encoded-array> + Definition: should specify the TLMM summary IRQ. + +- interrupt-controller: + Usage: required + Value type: <none> + Definition: identifies this node as an interrupt controller + +- #interrupt-cells: + Usage: required + Value type: <u32> + Definition: must be 2. Specifying the pin number and flags, as defined + in <dt-bindings/interrupt-controller/irq.h> + +- gpio-controller: + Usage: required + Value type: <none> + Definition: identifies this node as a gpio controller + +- gpio-ranges: + Usage: required + Value type: <prop-encoded-array> + Definition: Specifies the mapping between gpio controller and + pin-controller pins. + +- #gpio-cells: + Usage: required + Value type: <u32> + Definition: must be 2. Specifying the pin number and flags, as defined + in <dt-bindings/gpio/gpio.h> + +Please refer to ../gpio/gpio.txt and ../interrupt-controller/interrupts.txt for +a general description of GPIO and interrupt bindings. + +Please refer to pinctrl-bindings.txt in this directory for details of the +common pinctrl bindings used by client devices, including the meaning of the +phrase "pin configuration node". + +The pin configuration nodes act as a container for an arbitrary number of +subnodes. Each of these subnodes represents some desired configuration for a +pin, a group, or a list of pins or groups. This configuration can include the +mux function to select on those pin(s)/group(s), and various pin configuration +parameters, such as pull-up, drive strength, etc. + + +PIN CONFIGURATION NODES: + +The name of each subnode is not important; all subnodes should be enumerated +and processed purely based on their content. + +Each subnode only affects those parameters that are explicitly listed. In +other words, a subnode that lists a mux function but no pin configuration +parameters implies no information about any pin configuration parameters. +Similarly, a pin subnode that describes a pullup parameter implies no +information about e.g. the mux function. + + +The following generic properties as defined in pinctrl-bindings.txt are valid +to specify in a pin configuration subnode: + +- pins: + Usage: required + Value type: <string-array> + Definition: List of gpio pins affected by the properties specified in + this subnode. Valid pins are: + gpio0-gpio113, + Supports mux, bias and drive-strength + sdc1_clk, sdc1_cmd, sdc1_data sdc2_clk, sdc2_cmd, sdc2_data sdc1_rclk, + Supports bias and drive-strength + +- function: + Usage: required + Value type: <string> + Definition: Specify the alternative function to be configured for the + specified pins. Functions are only valid for gpio pins. + Valid values are: + adsp_ext, agera_pll, atest_char, atest_char0, atest_char1, + atest_char2, atest_char3, atest_gpsadc0, atest_gpsadc1, + atest_tsens, atest_tsens2, atest_usb1, atest_usb10, + atest_usb11, atest_usb12, atest_usb13, atest_usb2, + atest_usb20, atest_usb21, atest_usb22, atest_usb23, + audio_ref, bimc_dte0, bimc_dte1, blsp_i2c1, blsp_i2c2, + blsp_i2c3, blsp_i2c4, blsp_i2c5, blsp_i2c6, blsp_i2c7, + blsp_i2c8_a, blsp_i2c8_b, blsp_spi1, blsp_spi2, blsp_spi3, + blsp_spi3_cs1, blsp_spi3_cs2, blsp_spi4, blsp_spi5, + blsp_spi6, blsp_spi7, blsp_spi8_a, blsp_spi8_b, + blsp_spi8_cs1, blsp_spi8_cs2, blsp_uart1, blsp_uart2, + blsp_uart5, blsp_uart6_a, blsp_uart6_b, blsp_uim1, + blsp_uim2, blsp_uim5, blsp_uim6, cam_mclk, cci_async, + cci_i2c, cri_trng, cri_trng0, cri_trng1, dbg_out, ddr_bist, + gcc_gp1, gcc_gp2, gcc_gp3, gpio, gps_tx_a, gps_tx_b, gps_tx_c, + isense_dbg, jitter_bist, ldo_en, ldo_update, m_voc, mdp_vsync, + mdss_vsync0, mdss_vsync1, mdss_vsync2, mdss_vsync3, mss_lte, + nav_pps_a, nav_pps_b, nav_pps_c, pa_indicator, phase_flag0, + phase_flag1, phase_flag10, phase_flag11, phase_flag12, + phase_flag13, phase_flag14, phase_flag15, phase_flag16, + phase_flag17, phase_flag18, phase_flag19, phase_flag2, + phase_flag20, phase_flag21, phase_flag22, phase_flag23, + phase_flag24, phase_flag25, phase_flag26, phase_flag27, + phase_flag28, phase_flag29, phase_flag3, phase_flag30, + phase_flag31, phase_flag4, phase_flag5, phase_flag6, + phase_flag7, phase_flag8, phase_flag9, pll_bypassnl, + pll_reset, pri_mi2s, pri_mi2s_ws, prng_rosc, pwr_crypto, + pwr_modem, pwr_nav, qdss_cti0_a, qdss_cti0_b, qdss_cti1_a, + qdss_cti1_b, qdss_gpio, qdss_gpio0, qdss_gpio1, qdss_gpio10, + qdss_gpio11, qdss_gpio12, qdss_gpio13, qdss_gpio14, qdss_gpio15, + qdss_gpio2, qdss_gpio3, qdss_gpio4, qdss_gpio5, qdss_gpio6, + qdss_gpio7, qdss_gpio8, qdss_gpio9, qlink_enable, qlink_request, + qspi_clk, qspi_cs, qspi_data0, qspi_data1, qspi_data2, + qspi_data3, qspi_resetn, sec_mi2s, sndwire_clk, sndwire_data, + sp_cmu, ssc_irq, tgu_ch0, tgu_ch1, tsense_pwm1, tsense_pwm2, + uim1_clk, uim1_data, uim1_present, uim1_reset, uim2_clk, + uim2_data, uim2_present, uim2_reset, uim_batt, vfr_1, + vsense_clkout, vsense_data0, vsense_data1, vsense_mode, + wlan1_adc0, wlan1_adc1, wlan2_adc0, wlan2_adc1 + +- bias-disable: + Usage: optional + Value type: <none> + Definition: The specified pins should be configued as no pull. + +- bias-pull-down: + Usage: optional + Value type: <none> + Definition: The specified pins should be configued as pull down. + +- bias-pull-up: + Usage: optional + Value type: <none> + Definition: The specified pins should be configued as pull up. + +- output-high: + Usage: optional + Value type: <none> + Definition: The specified pins are configured in output mode, driven + high. + Not valid for sdc pins. + +- output-low: + Usage: optional + Value type: <none> + Definition: The specified pins are configured in output mode, driven + low. + Not valid for sdc pins. + +- drive-strength: + Usage: optional + Value type: <u32> + Definition: Selects the drive strength for the specified pins, in mA. + Valid values are: 2, 4, 6, 8, 10, 12, 14 and 16 + +Example: + + tlmm: pinctrl@1010000 { + compatible = "qcom,sdm660-pinctrl"; + reg = <0x1010000 0x300000>; + interrupts = <0 208 0>; + gpio-controller; + gpio-ranges = <&tlmm 0 0 114>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + };
Signature · 1 line
2.18.0
Re: [PATCH v3 2/2] dt-bindings: pinctrl: qcom: Add SDM660 pinctrl binding
Quoted 1 line · Craig Tatlor
Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt +0
-0
[..]
Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt line 15
Quoted 4 lines
+- reg:
Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt +3
-0+ Usage: required + Value type: <prop-encoded-array> + Definition: the base address and size of the TLMM register space.
This should mention that we're expecting address and size of the three tiles. And the proposed patches depends on reg-names for the lookup.
Quoted 1 line
+
[..]
Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt line 174
Quoted 5 lines
Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt +5
-0+Example: + + tlmm: pinctrl@1010000 { + compatible = "qcom,sdm660-pinctrl"; + reg = <0x1010000 0x300000>;
reg (and the node address) needs to be updated.
Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt line 175
Quoted 1 line
Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt +1
-0+ interrupts = <0 208 0>;
interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt line 181
Quoted 6 lines
Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt +6
-0+ gpio-controller; + gpio-ranges = <&tlmm 0 0 114>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + };
Regards,
Bjorn
Quoted 11 lines · Craig Tatlor
From: Neeraj Upadhyay <[email protected]>
Add initial pinctrl driver to support pin configuration with pinctrl framework for sdm660.
Based off CAF implementation.Signed-off-by Neeraj Upadhyay <[email protected]>Co-Developed-by Venkatesh Yadav Abbarapu <[email protected]>Signed-off-by Venkatesh Yadav Abbarapu <[email protected]>[craig: minor updates for upstreaming, updated tile handling]Signed-off-by Craig Tatlor <[email protected]>
Regards,
Bjorn
Quoted 1,506 lines
--- drivers/pinctrl/qcom/Kconfig | 9 + drivers/pinctrl/qcom/Makefile | 1 + drivers/pinctrl/qcom/pinctrl-sdm660.c | 1455 +++++++++++++++++++++++++ 3 files changed, 1465 insertions(+) create mode 100644 drivers/pinctrl/qcom/pinctrl-sdm660.cChanges from V2:
Sort everything
Use tiles
Add sdm630 compatibledrivers/pinctrl/qcom/Kconfig +9
-0@@ -155,6 +155,15 @@ config PINCTRL_QCOM_SSBI_PMIC which are using SSBI for communication with SoC. Example PMIC's devices are pm8058 and pm8921. +config PINCTRL_SDM660 + tristate "Qualcomm Technologies Inc SDM660 pin controller driver" + depends on GPIOLIB && OF + select PINCTRL_MSM + help + This is the pinctrl, pinmux, pinconf and gpiolib driver for the + Qualcomm Technologies Inc TLMM block found on the Qualcomm + Technologies Inc SDM660 platform. + config PINCTRL_SDM845 tristate "Qualcomm Technologies Inc SDM845 pin controller driver" depends on GPIOLIB && OFdrivers/pinctrl/qcom/Makefile +1
-0@@ -20,4 +20,5 @@ obj-$(CONFIG_PINCTRL_QCOM_SPMI_PMIC) += pinctrl-spmi-gpio.o obj-$(CONFIG_PINCTRL_QCOM_SPMI_PMIC) += pinctrl-spmi-mpp.o obj-$(CONFIG_PINCTRL_QCOM_SSBI_PMIC) += pinctrl-ssbi-gpio.o obj-$(CONFIG_PINCTRL_QCOM_SSBI_PMIC) += pinctrl-ssbi-mpp.o +obj-$(CONFIG_PINCTRL_SDM660) += pinctrl-sdm660.o obj-$(CONFIG_PINCTRL_SDM845) += pinctrl-sdm845.odrivers/pinctrl/qcom/pinctrl-sdm660.c new file +1455
-0@@ -0,0 +1,1455 @@ +// SPDX-License-Identifier: GPL-2.0 +/* +* Copyright (c) 2016, The Linux Foundation. All rights reserved. +* Copyright (c) 2018, Craig Tatlor. +*/ + +#include <linux/module.h> +#include <linux/of.h> +#include <linux/platform_device.h> +#include <linux/pinctrl/pinctrl.h> + +#include "pinctrl-msm.h" + +static const char *const sdm660_tiles[] = { +"north" , +"center" , +"south" +}; + +enum { +NORTH , +CENTER , +SOUTH +}; + +#define REG_SIZE 0x1000 + +#define FUNCTION (fname) \ + [msm_mux_##fname] = { \ + .name = #fname, \ + .groups = fname##_groups, \ + .ngroups = ARRAY_SIZE(fname##_groups), \ + } + + +#define PINGROUP(id, base, f1, f2, f3, f4, f5, f6, f7, f8, f9) \ + { \ + .name = "gpio" #id, \ + .pins = gpio##id##_pins, \ + .npins = (unsigned)ARRAY_SIZE(gpio##id##_pins), \ + .funcs = (int[]){ \ + msm_mux_gpio, /* gpio mode */ \ + msm_mux_##f1, \ + msm_mux_##f2, \ + msm_mux_##f3, \ + msm_mux_##f4, \ + msm_mux_##f5, \ + msm_mux_##f6, \ + msm_mux_##f7, \ + msm_mux_##f8, \ + msm_mux_##f9 \ + }, \ + .nfuncs = 10, \ + .ctl_reg = base + REG_SIZE * id, \ + .io_reg = base + 0x4 + REG_SIZE * id, \ + .intr_cfg_reg = base + 0x8 + REG_SIZE * id, \ + .intr_status_reg = base + 0xc + REG_SIZE * id, \ + .intr_target_reg = base + 0x8 + REG_SIZE * id, \ + .mux_bit = 2, \ + .pull_bit = 0, \ + .drv_bit = 6, \ + .oe_bit = 9, \ + .in_bit = 0, \ + .out_bit = 1, \ + .intr_enable_bit = 0, \ + .intr_status_bit = 0, \ + .intr_target_bit = 5, \ + .intr_target_kpss_val = 3, \ + .intr_raw_status_bit = 4, \ + .intr_polarity_bit = 1, \ + .intr_detection_bit = 2, \ + .intr_detection_width = 2, \ + } + +#define SDC_QDSD_PINGROUP (pg_name, ctl, pull, drv) \ + { \ + .name = #pg_name, \ + .pins = pg_name##_pins, \ + .npins = (unsigned)ARRAY_SIZE(pg_name##_pins), \ + .ctl_reg = ctl, \ + .io_reg = 0, \ + .intr_cfg_reg = 0, \ + .intr_status_reg = 0, \ + .intr_target_reg = 0, \ + .mux_bit = -1, \ + .pull_bit = pull, \ + .drv_bit = drv, \ + .oe_bit = -1, \ + .in_bit = -1, \ + .out_bit = -1, \ + .intr_enable_bit = -1, \ + .intr_status_bit = -1, \ + .intr_target_bit = -1, \ + .intr_raw_status_bit = -1, \ + .intr_polarity_bit = -1, \ + .intr_detection_bit = -1, \ + .intr_detection_width = -1, \ + } + +static const struct pinctrl_pin_desc sdm660_pins[] = { +PINCTRL_PIN (0 ,"GPIO_0" ), +PINCTRL_PIN (1 ,"GPIO_1" ), +PINCTRL_PIN (2 ,"GPIO_2" ), +PINCTRL_PIN (3 ,"GPIO_3" ), +PINCTRL_PIN (4 ,"GPIO_4" ), +PINCTRL_PIN (5 ,"GPIO_5" ), +PINCTRL_PIN (6 ,"GPIO_6" ), +PINCTRL_PIN (7 ,"GPIO_7" ), +PINCTRL_PIN (8 ,"GPIO_8" ), +PINCTRL_PIN (9 ,"GPIO_9" ), +PINCTRL_PIN (10 ,"GPIO_10" ), +PINCTRL_PIN (11 ,"GPIO_11" ), +PINCTRL_PIN (12 ,"GPIO_12" ), +PINCTRL_PIN (13 ,"GPIO_13" ), +PINCTRL_PIN (14 ,"GPIO_14" ), +PINCTRL_PIN (15 ,"GPIO_15" ), +PINCTRL_PIN (16 ,"GPIO_16" ), +PINCTRL_PIN (17 ,"GPIO_17" ), +PINCTRL_PIN (18 ,"GPIO_18" ), +PINCTRL_PIN (19 ,"GPIO_19" ), +PINCTRL_PIN (20 ,"GPIO_20" ), +PINCTRL_PIN (21 ,"GPIO_21" ), +PINCTRL_PIN (22 ,"GPIO_22" ), +PINCTRL_PIN (23 ,"GPIO_23" ), +PINCTRL_PIN (24 ,"GPIO_24" ), +PINCTRL_PIN (25 ,"GPIO_25" ), +PINCTRL_PIN (26 ,"GPIO_26" ), +PINCTRL_PIN (27 ,"GPIO_27" ), +PINCTRL_PIN (28 ,"GPIO_28" ), +PINCTRL_PIN (29 ,"GPIO_29" ), +PINCTRL_PIN (30 ,"GPIO_30" ), +PINCTRL_PIN (31 ,"GPIO_31" ), +PINCTRL_PIN (32 ,"GPIO_32" ), +PINCTRL_PIN (33 ,"GPIO_33" ), +PINCTRL_PIN (34 ,"GPIO_34" ), +PINCTRL_PIN (35 ,"GPIO_35" ), +PINCTRL_PIN (36 ,"GPIO_36" ), +PINCTRL_PIN (37 ,"GPIO_37" ), +PINCTRL_PIN (38 ,"GPIO_38" ), +PINCTRL_PIN (39 ,"GPIO_39" ), +PINCTRL_PIN (40 ,"GPIO_40" ), +PINCTRL_PIN (41 ,"GPIO_41" ), +PINCTRL_PIN (42 ,"GPIO_42" ), +PINCTRL_PIN (43 ,"GPIO_43" ), +PINCTRL_PIN (44 ,"GPIO_44" ), +PINCTRL_PIN (45 ,"GPIO_45" ), +PINCTRL_PIN (46 ,"GPIO_46" ), +PINCTRL_PIN (47 ,"GPIO_47" ), +PINCTRL_PIN (48 ,"GPIO_48" ), +PINCTRL_PIN (49 ,"GPIO_49" ), +PINCTRL_PIN (50 ,"GPIO_50" ), +PINCTRL_PIN (51 ,"GPIO_51" ), +PINCTRL_PIN (52 ,"GPIO_52" ), +PINCTRL_PIN (53 ,"GPIO_53" ), +PINCTRL_PIN (54 ,"GPIO_54" ), +PINCTRL_PIN (55 ,"GPIO_55" ), +PINCTRL_PIN (56 ,"GPIO_56" ), +PINCTRL_PIN (57 ,"GPIO_57" ), +PINCTRL_PIN (58 ,"GPIO_58" ), +PINCTRL_PIN (59 ,"GPIO_59" ), +PINCTRL_PIN (60 ,"GPIO_60" ), +PINCTRL_PIN (61 ,"GPIO_61" ), +PINCTRL_PIN (62 ,"GPIO_62" ), +PINCTRL_PIN (63 ,"GPIO_63" ), +PINCTRL_PIN (64 ,"GPIO_64" ), +PINCTRL_PIN (65 ,"GPIO_65" ), +PINCTRL_PIN (66 ,"GPIO_66" ), +PINCTRL_PIN (67 ,"GPIO_67" ), +PINCTRL_PIN (68 ,"GPIO_68" ), +PINCTRL_PIN (69 ,"GPIO_69" ), +PINCTRL_PIN (70 ,"GPIO_70" ), +PINCTRL_PIN (71 ,"GPIO_71" ), +PINCTRL_PIN (72 ,"GPIO_72" ), +PINCTRL_PIN (73 ,"GPIO_73" ), +PINCTRL_PIN (74 ,"GPIO_74" ), +PINCTRL_PIN (75 ,"GPIO_75" ), +PINCTRL_PIN (76 ,"GPIO_76" ), +PINCTRL_PIN (77 ,"GPIO_77" ), +PINCTRL_PIN (78 ,"GPIO_78" ), +PINCTRL_PIN (79 ,"GPIO_79" ), +PINCTRL_PIN (80 ,"GPIO_80" ), +PINCTRL_PIN (81 ,"GPIO_81" ), +PINCTRL_PIN (82 ,"GPIO_82" ), +PINCTRL_PIN (83 ,"GPIO_83" ), +PINCTRL_PIN (84 ,"GPIO_84" ), +PINCTRL_PIN (85 ,"GPIO_85" ), +PINCTRL_PIN (86 ,"GPIO_86" ), +PINCTRL_PIN (87 ,"GPIO_87" ), +PINCTRL_PIN (88 ,"GPIO_88" ), +PINCTRL_PIN (89 ,"GPIO_89" ), +PINCTRL_PIN (90 ,"GPIO_90" ), +PINCTRL_PIN (91 ,"GPIO_91" ), +PINCTRL_PIN (92 ,"GPIO_92" ), +PINCTRL_PIN (93 ,"GPIO_93" ), +PINCTRL_PIN (94 ,"GPIO_94" ), +PINCTRL_PIN (95 ,"GPIO_95" ), +PINCTRL_PIN (96 ,"GPIO_96" ), +PINCTRL_PIN (97 ,"GPIO_97" ), +PINCTRL_PIN (98 ,"GPIO_98" ), +PINCTRL_PIN (99 ,"GPIO_99" ), +PINCTRL_PIN (100 ,"GPIO_100" ), +PINCTRL_PIN (101 ,"GPIO_101" ), +PINCTRL_PIN (102 ,"GPIO_102" ), +PINCTRL_PIN (103 ,"GPIO_103" ), +PINCTRL_PIN (104 ,"GPIO_104" ), +PINCTRL_PIN (105 ,"GPIO_105" ), +PINCTRL_PIN (106 ,"GPIO_106" ), +PINCTRL_PIN (107 ,"GPIO_107" ), +PINCTRL_PIN (108 ,"GPIO_108" ), +PINCTRL_PIN (109 ,"GPIO_109" ), +PINCTRL_PIN (110 ,"GPIO_110" ), +PINCTRL_PIN (111 ,"GPIO_111" ), +PINCTRL_PIN (112 ,"GPIO_112" ), +PINCTRL_PIN (113 ,"GPIO_113" ), +PINCTRL_PIN (114 ,"SDC1_CLK" ), +PINCTRL_PIN (115 ,"SDC1_CMD" ), +PINCTRL_PIN (116 ,"SDC1_DATA" ), +PINCTRL_PIN (117 ,"SDC2_CLK" ), +PINCTRL_PIN (118 ,"SDC2_CMD" ), +PINCTRL_PIN (119 ,"SDC2_DATA" ), +PINCTRL_PIN (120 ,"SDC1_RCLK" ), +}; + +#define DECLARE_MSM_GPIO_PINS (pin) \ + static const unsigned int gpio##pin##_pins[] = { pin } +DECLARE_MSM_GPIO_PINS (0 ); +DECLARE_MSM_GPIO_PINS (1 ); +DECLARE_MSM_GPIO_PINS (2 ); +DECLARE_MSM_GPIO_PINS (3 ); +DECLARE_MSM_GPIO_PINS (4 ); +DECLARE_MSM_GPIO_PINS (5 ); +DECLARE_MSM_GPIO_PINS (6 ); +DECLARE_MSM_GPIO_PINS (7 ); +DECLARE_MSM_GPIO_PINS (8 ); +DECLARE_MSM_GPIO_PINS (9 ); +DECLARE_MSM_GPIO_PINS (10 ); +DECLARE_MSM_GPIO_PINS (11 ); +DECLARE_MSM_GPIO_PINS (12 ); +DECLARE_MSM_GPIO_PINS (13 ); +DECLARE_MSM_GPIO_PINS (14 ); +DECLARE_MSM_GPIO_PINS (15 ); +DECLARE_MSM_GPIO_PINS (16 ); +DECLARE_MSM_GPIO_PINS (17 ); +DECLARE_MSM_GPIO_PINS (18 ); +DECLARE_MSM_GPIO_PINS (19 ); +DECLARE_MSM_GPIO_PINS (20 ); +DECLARE_MSM_GPIO_PINS (21 ); +DECLARE_MSM_GPIO_PINS (22 ); +DECLARE_MSM_GPIO_PINS (23 ); +DECLARE_MSM_GPIO_PINS (24 ); +DECLARE_MSM_GPIO_PINS (25 ); +DECLARE_MSM_GPIO_PINS (26 ); +DECLARE_MSM_GPIO_PINS (27 ); +DECLARE_MSM_GPIO_PINS (28 ); +DECLARE_MSM_GPIO_PINS (29 ); +DECLARE_MSM_GPIO_PINS (30 ); +DECLARE_MSM_GPIO_PINS (31 ); +DECLARE_MSM_GPIO_PINS (32 ); +DECLARE_MSM_GPIO_PINS (33 ); +DECLARE_MSM_GPIO_PINS (34 ); +DECLARE_MSM_GPIO_PINS (35 ); +DECLARE_MSM_GPIO_PINS (36 ); +DECLARE_MSM_GPIO_PINS (37 ); +DECLARE_MSM_GPIO_PINS (38 ); +DECLARE_MSM_GPIO_PINS (39 ); +DECLARE_MSM_GPIO_PINS (40 ); +DECLARE_MSM_GPIO_PINS (41 ); +DECLARE_MSM_GPIO_PINS (42 ); +DECLARE_MSM_GPIO_PINS (43 ); +DECLARE_MSM_GPIO_PINS (44 ); +DECLARE_MSM_GPIO_PINS (45 ); +DECLARE_MSM_GPIO_PINS (46 ); +DECLARE_MSM_GPIO_PINS (47 ); +DECLARE_MSM_GPIO_PINS (48 ); +DECLARE_MSM_GPIO_PINS (49 ); +DECLARE_MSM_GPIO_PINS (50 ); +DECLARE_MSM_GPIO_PINS (51 ); +DECLARE_MSM_GPIO_PINS (52 ); +DECLARE_MSM_GPIO_PINS (53 ); +DECLARE_MSM_GPIO_PINS (54 ); +DECLARE_MSM_GPIO_PINS (55 ); +DECLARE_MSM_GPIO_PINS (56 ); +DECLARE_MSM_GPIO_PINS (57 ); +DECLARE_MSM_GPIO_PINS (58 ); +DECLARE_MSM_GPIO_PINS (59 ); +DECLARE_MSM_GPIO_PINS (60 ); +DECLARE_MSM_GPIO_PINS (61 ); +DECLARE_MSM_GPIO_PINS (62 ); +DECLARE_MSM_GPIO_PINS (63 ); +DECLARE_MSM_GPIO_PINS (64 ); +DECLARE_MSM_GPIO_PINS (65 ); +DECLARE_MSM_GPIO_PINS (66 ); +DECLARE_MSM_GPIO_PINS (67 ); +DECLARE_MSM_GPIO_PINS (68 ); +DECLARE_MSM_GPIO_PINS (69 ); +DECLARE_MSM_GPIO_PINS (70 ); +DECLARE_MSM_GPIO_PINS (71 ); +DECLARE_MSM_GPIO_PINS (72 ); +DECLARE_MSM_GPIO_PINS (73 ); +DECLARE_MSM_GPIO_PINS (74 ); +DECLARE_MSM_GPIO_PINS (75 ); +DECLARE_MSM_GPIO_PINS (76 ); +DECLARE_MSM_GPIO_PINS (77 ); +DECLARE_MSM_GPIO_PINS (78 ); +DECLARE_MSM_GPIO_PINS (79 ); +DECLARE_MSM_GPIO_PINS (80 ); +DECLARE_MSM_GPIO_PINS (81 ); +DECLARE_MSM_GPIO_PINS (82 ); +DECLARE_MSM_GPIO_PINS (83 ); +DECLARE_MSM_GPIO_PINS (84 ); +DECLARE_MSM_GPIO_PINS (85 ); +DECLARE_MSM_GPIO_PINS (86 ); +DECLARE_MSM_GPIO_PINS (87 ); +DECLARE_MSM_GPIO_PINS (88 ); +DECLARE_MSM_GPIO_PINS (89 ); +DECLARE_MSM_GPIO_PINS (90 ); +DECLARE_MSM_GPIO_PINS (91 ); +DECLARE_MSM_GPIO_PINS (92 ); +DECLARE_MSM_GPIO_PINS (93 ); +DECLARE_MSM_GPIO_PINS (94 ); +DECLARE_MSM_GPIO_PINS (95 ); +DECLARE_MSM_GPIO_PINS (96 ); +DECLARE_MSM_GPIO_PINS (97 ); +DECLARE_MSM_GPIO_PINS (98 ); +DECLARE_MSM_GPIO_PINS (99 ); +DECLARE_MSM_GPIO_PINS (100 ); +DECLARE_MSM_GPIO_PINS (101 ); +DECLARE_MSM_GPIO_PINS (102 ); +DECLARE_MSM_GPIO_PINS (103 ); +DECLARE_MSM_GPIO_PINS (104 ); +DECLARE_MSM_GPIO_PINS (105 ); +DECLARE_MSM_GPIO_PINS (106 ); +DECLARE_MSM_GPIO_PINS (107 ); +DECLARE_MSM_GPIO_PINS (108 ); +DECLARE_MSM_GPIO_PINS (109 ); +DECLARE_MSM_GPIO_PINS (110 ); +DECLARE_MSM_GPIO_PINS (111 ); +DECLARE_MSM_GPIO_PINS (112 ); +DECLARE_MSM_GPIO_PINS (113 ); + +static const unsigned int sdc1_clk_pins[] = {114 }; +static const unsigned int sdc1_cmd_pins[] = {115 }; +static const unsigned int sdc1_data_pins[] = {116 }; +static const unsigned int sdc1_rclk_pins[] = {120 }; +static const unsigned int sdc2_clk_pins[] = {117 }; +static const unsigned int sdc2_cmd_pins[] = {118 }; +static const unsigned int sdc2_data_pins[] = {119 }; + +enum sdm660_functions { + msm_mux_adsp_ext, + msm_mux_agera_pll, + msm_mux_atest_char, + msm_mux_atest_char0, + msm_mux_atest_char1, + msm_mux_atest_char2, + msm_mux_atest_char3, + msm_mux_atest_gpsadc0, + msm_mux_atest_gpsadc1, + msm_mux_atest_tsens, + msm_mux_atest_tsens2, + msm_mux_atest_usb1, + msm_mux_atest_usb10, + msm_mux_atest_usb11, + msm_mux_atest_usb12, + msm_mux_atest_usb13, + msm_mux_atest_usb2, + msm_mux_atest_usb20, + msm_mux_atest_usb21, + msm_mux_atest_usb22, + msm_mux_atest_usb23, + msm_mux_audio_ref, + msm_mux_bimc_dte0, + msm_mux_bimc_dte1, + msm_mux_blsp_i2c1, + msm_mux_blsp_i2c2, + msm_mux_blsp_i2c3, + msm_mux_blsp_i2c4, + msm_mux_blsp_i2c5, + msm_mux_blsp_i2c6, + msm_mux_blsp_i2c7, + msm_mux_blsp_i2c8_a, + msm_mux_blsp_i2c8_b, + msm_mux_blsp_spi1, + msm_mux_blsp_spi2, + msm_mux_blsp_spi3, + msm_mux_blsp_spi3_cs1, + msm_mux_blsp_spi3_cs2, + msm_mux_blsp_spi4, + msm_mux_blsp_spi5, + msm_mux_blsp_spi6, + msm_mux_blsp_spi7, + msm_mux_blsp_spi8_a, + msm_mux_blsp_spi8_b, + msm_mux_blsp_spi8_cs1, + msm_mux_blsp_spi8_cs2, + msm_mux_blsp_uart1, + msm_mux_blsp_uart2, + msm_mux_blsp_uart5, + msm_mux_blsp_uart6_a, + msm_mux_blsp_uart6_b, + msm_mux_blsp_uim1, + msm_mux_blsp_uim2, + msm_mux_blsp_uim5, + msm_mux_blsp_uim6, + msm_mux_cam_mclk, + msm_mux_cci_async, + msm_mux_cci_i2c, + msm_mux_cri_trng, + msm_mux_cri_trng0, + msm_mux_cri_trng1, + msm_mux_dbg_out, + msm_mux_ddr_bist, + msm_mux_gcc_gp1, + msm_mux_gcc_gp2, + msm_mux_gcc_gp3, + msm_mux_gpio, + msm_mux_gps_tx_a, + msm_mux_gps_tx_b, + msm_mux_gps_tx_c, + msm_mux_isense_dbg, + msm_mux_jitter_bist, + msm_mux_ldo_en, + msm_mux_ldo_update, + msm_mux_m_voc, + msm_mux_mdp_vsync, + msm_mux_mdss_vsync0, + msm_mux_mdss_vsync1, + msm_mux_mdss_vsync2, + msm_mux_mdss_vsync3, + msm_mux_mss_lte, + msm_mux_nav_pps_a, + msm_mux_nav_pps_b, + msm_mux_nav_pps_c, + msm_mux_pa_indicator, + msm_mux_phase_flag0, + msm_mux_phase_flag1, + msm_mux_phase_flag2, + msm_mux_phase_flag3, + msm_mux_phase_flag4, + msm_mux_phase_flag5, + msm_mux_phase_flag6, + msm_mux_phase_flag7, + msm_mux_phase_flag8, + msm_mux_phase_flag9, + msm_mux_phase_flag10, + msm_mux_phase_flag11, + msm_mux_phase_flag12, + msm_mux_phase_flag13, + msm_mux_phase_flag14, + msm_mux_phase_flag15, + msm_mux_phase_flag16, + msm_mux_phase_flag17, + msm_mux_phase_flag18, + msm_mux_phase_flag19, + msm_mux_phase_flag20, + msm_mux_phase_flag21, + msm_mux_phase_flag22, + msm_mux_phase_flag23, + msm_mux_phase_flag24, + msm_mux_phase_flag25, + msm_mux_phase_flag26, + msm_mux_phase_flag27, + msm_mux_phase_flag28, + msm_mux_phase_flag29, + msm_mux_phase_flag30, + msm_mux_phase_flag31, + msm_mux_pll_bypassnl, + msm_mux_pll_reset, + msm_mux_pri_mi2s, + msm_mux_pri_mi2s_ws, + msm_mux_prng_rosc, + msm_mux_pwr_crypto, + msm_mux_pwr_modem, + msm_mux_pwr_nav, + msm_mux_qdss_cti0_a, + msm_mux_qdss_cti0_b, + msm_mux_qdss_cti1_a, + msm_mux_qdss_cti1_b, + msm_mux_qdss_gpio, + msm_mux_qdss_gpio0, + msm_mux_qdss_gpio1, + msm_mux_qdss_gpio10, + msm_mux_qdss_gpio11, + msm_mux_qdss_gpio12, + msm_mux_qdss_gpio13, + msm_mux_qdss_gpio14, + msm_mux_qdss_gpio15, + msm_mux_qdss_gpio2, + msm_mux_qdss_gpio3, + msm_mux_qdss_gpio4, + msm_mux_qdss_gpio5, + msm_mux_qdss_gpio6, + msm_mux_qdss_gpio7, + msm_mux_qdss_gpio8, + msm_mux_qdss_gpio9, + msm_mux_qlink_enable, + msm_mux_qlink_request, + msm_mux_qspi_clk, + msm_mux_qspi_cs, + msm_mux_qspi_data0, + msm_mux_qspi_data1, + msm_mux_qspi_data2, + msm_mux_qspi_data3, + msm_mux_qspi_resetn, + msm_mux_sec_mi2s, + msm_mux_sndwire_clk, + msm_mux_sndwire_data, + msm_mux_sp_cmu, + msm_mux_ssc_irq, + msm_mux_tgu_ch0, + msm_mux_tgu_ch1, + msm_mux_tsense_pwm1, + msm_mux_tsense_pwm2, + msm_mux_uim1_clk, + msm_mux_uim1_data, + msm_mux_uim1_present, + msm_mux_uim1_reset, + msm_mux_uim2_clk, + msm_mux_uim2_data, + msm_mux_uim2_present, + msm_mux_uim2_reset, + msm_mux_uim_batt, + msm_mux_vfr_1, + msm_mux_vsense_clkout, + msm_mux_vsense_data0, + msm_mux_vsense_data1, + msm_mux_vsense_mode, + msm_mux_wlan1_adc0, + msm_mux_wlan1_adc1, + msm_mux_wlan2_adc0, + msm_mux_wlan2_adc1, + msm_mux__, +}; + +static const char *const gpio_groups[] = { +"gpio0" ,"gpio1" ,"gpio2" ,"gpio3" ,"gpio4" ,"gpio5" ,"gpio6" ,"gpio7" , +"gpio8" ,"gpio9" ,"gpio10" ,"gpio11" ,"gpio12" ,"gpio13" ,"gpio14" , +"gpio15" ,"gpio16" ,"gpio17" ,"gpio18" ,"gpio19" ,"gpio20" ,"gpio21" , +"gpio22" ,"gpio23" ,"gpio24" ,"gpio25" ,"gpio26" ,"gpio27" ,"gpio28" , +"gpio29" ,"gpio30" ,"gpio31" ,"gpio32" ,"gpio33" ,"gpio34" ,"gpio35" , +"gpio36" ,"gpio37" ,"gpio38" ,"gpio39" ,"gpio40" ,"gpio41" ,"gpio42" , +"gpio43" ,"gpio44" ,"gpio45" ,"gpio46" ,"gpio47" ,"gpio48" ,"gpio49" , +"gpio50" ,"gpio51" ,"gpio52" ,"gpio53" ,"gpio54" ,"gpio55" ,"gpio56" , +"gpio57" ,"gpio58" ,"gpio59" ,"gpio60" ,"gpio61" ,"gpio62" ,"gpio63" , +"gpio64" ,"gpio65" ,"gpio66" ,"gpio67" ,"gpio68" ,"gpio69" ,"gpio70" , +"gpio71" ,"gpio72" ,"gpio73" ,"gpio74" ,"gpio75" ,"gpio76" ,"gpio77" , +"gpio78" ,"gpio79" ,"gpio80" ,"gpio81" ,"gpio82" ,"gpio83" ,"gpio84" , +"gpio85" ,"gpio86" ,"gpio87" ,"gpio88" ,"gpio89" ,"gpio90" ,"gpio91" , +"gpio92" ,"gpio93" ,"gpio94" ,"gpio95" ,"gpio96" ,"gpio97" ,"gpio98" , +"gpio99" ,"gpio100" ,"gpio101" ,"gpio102" ,"gpio103" ,"gpio104" , +"gpio105" ,"gpio106" ,"gpio107" ,"gpio108" ,"gpio109" ,"gpio110" , +"gpio111" ,"gpio112" ,"gpio113" , +}; + +static const char *const adsp_ext_groups[] = { +"gpio65" , +}; +static const char *const agera_pll_groups[] = { +"gpio34" ,"gpio36" , +}; +static const char *const atest_char0_groups[] = { +"gpio62" , +}; +static const char *const atest_char1_groups[] = { +"gpio61" , +}; +static const char *const atest_char2_groups[] = { +"gpio60" , +}; +static const char *const atest_char3_groups[] = { +"gpio59" , +}; +static const char *const atest_char_groups[] = { +"gpio58" , +}; +static const char *const atest_gpsadc0_groups[] = { +"gpio1" , +}; +static const char *const atest_gpsadc1_groups[] = { +"gpio0" , +}; +static const char *const atest_tsens2_groups[] = { +"gpio3" , +}; +static const char *const atest_tsens_groups[] = { +"gpio36" , +}; +static const char *const atest_usb10_groups[] = { +"gpio11" , +}; +static const char *const atest_usb11_groups[] = { +"gpio10" , +}; +static const char *const atest_usb12_groups[] = { +"gpio9" , +}; +static const char *const atest_usb13_groups[] = { +"gpio8" , +}; +static const char *const atest_usb1_groups[] = { +"gpio3" , +}; +static const char *const atest_usb20_groups[] = { +"gpio56" , +}; +static const char *const atest_usb21_groups[] = { +"gpio36" , +}; +static const char *const atest_usb22_groups[] = { +"gpio57" , +}; +static const char *const atest_usb23_groups[] = { +"gpio37" , +}; +static const char *const atest_usb2_groups[] = { +"gpio35" , +}; +static const char *const audio_ref_groups[] = { +"gpio62" , +}; +static const char *const bimc_dte0_groups[] = { +"gpio9" ,"gpio11" , +}; +static const char *const bimc_dte1_groups[] = { +"gpio8" ,"gpio10" , +}; +static const char *const blsp_i2c1_groups[] = { +"gpio2" ,"gpio3" , +}; +static const char *const blsp_i2c2_groups[] = { +"gpio6" ,"gpio7" , +}; +static const char *const blsp_i2c3_groups[] = { +"gpio10" ,"gpio11" , +}; +static const char *const blsp_i2c4_groups[] = { +"gpio14" ,"gpio15" , +}; +static const char *const blsp_i2c5_groups[] = { +"gpio18" ,"gpio19" , +}; +static const char *const blsp_i2c6_groups[] = { +"gpio22" ,"gpio23" , +}; +static const char *const blsp_i2c7_groups[] = { +"gpio26" ,"gpio27" , +}; +static const char *const blsp_i2c8_a_groups[] = { +"gpio30" ,"gpio31" , +}; +static const char *const blsp_i2c8_b_groups[] = { +"gpio44" ,"gpio52" , +}; +static const char *const blsp_spi1_groups[] = { +"gpio0" ,"gpio1" ,"gpio2" ,"gpio3" ,"gpio46" , +}; +static const char *const blsp_spi2_groups[] = { +"gpio4" ,"gpio5" ,"gpio6" ,"gpio7" , +}; +static const char *const blsp_spi3_cs1_groups[] = { +"gpio30" , +}; +static const char *const blsp_spi3_cs2_groups[] = { +"gpio65" , +}; +static const char *const blsp_spi3_groups[] = { +"gpio8" ,"gpio9" ,"gpio10" ,"gpio11" , +}; +static const char *const blsp_spi4_groups[] = { +"gpio12" ,"gpio13" ,"gpio14" ,"gpio15" , +}; +static const char *const blsp_spi5_groups[] = { +"gpio16" ,"gpio17" ,"gpio18" ,"gpio19" , +}; +static const char *const blsp_spi6_groups[] = { +"gpio49" ,"gpio52" ,"gpio22" ,"gpio23" , +}; +static const char *const blsp_spi7_groups[] = { +"gpio24" ,"gpio25" ,"gpio26" ,"gpio27" , +}; +static const char *const blsp_spi8_a_groups[] = { +"gpio28" ,"gpio29" ,"gpio30" ,"gpio31" , +}; +static const char *const blsp_spi8_b_groups[] = { +"gpio40" ,"gpio41" ,"gpio44" ,"gpio52" , +}; +static const char *const blsp_spi8_cs1_groups[] = { +"gpio64" , +}; +static const char *const blsp_spi8_cs2_groups[] = { +"gpio76" , +}; +static const char *const blsp_uart1_groups[] = { +"gpio0" ,"gpio1" ,"gpio2" ,"gpio3" , +}; +static const char *const blsp_uart2_groups[] = { +"gpio4" ,"gpio5" ,"gpio6" ,"gpio7" , +}; +static const char *const blsp_uart5_groups[] = { +"gpio16" ,"gpio17" ,"gpio18" ,"gpio19" , +}; +static const char *const blsp_uart6_a_groups[] = { +"gpio24" ,"gpio25" ,"gpio26" ,"gpio27" , +}; +static const char *const blsp_uart6_b_groups[] = { +"gpio28" ,"gpio29" ,"gpio30" ,"gpio31" , +}; +static const char *const blsp_uim1_groups[] = { +"gpio0" ,"gpio1" , +}; +static const char *const blsp_uim2_groups[] = { +"gpio4" ,"gpio5" , +}; +static const char *const blsp_uim5_groups[] = { +"gpio16" ,"gpio17" , +}; +static const char *const blsp_uim6_groups[] = { +"gpio20" ,"gpio21" , +}; +static const char *const cam_mclk_groups[] = { +"gpio32" ,"gpio33" ,"gpio34" ,"gpio35" , +}; +static const char *const cci_async_groups[] = { +"gpio45" , +}; +static const char *const cci_i2c_groups[] = { +"gpio36" ,"gpio37" ,"gpio38" ,"gpio39" , +}; +static const char *const cri_trng0_groups[] = { +"gpio60" , +}; +static const char *const cri_trng1_groups[] = { +"gpio61" , +}; +static const char *const cri_trng_groups[] = { +"gpio62" , +}; +static const char *const dbg_out_groups[] = { +"gpio11" , +}; +static const char *const ddr_bist_groups[] = { +"gpio3" ,"gpio8" ,"gpio9" ,"gpio10" , +}; +static const char *const gcc_gp1_groups[] = { +"gpio57" ,"gpio78" , +}; +static const char *const gcc_gp2_groups[] = { +"gpio58" ,"gpio81" , +}; +static const char *const gcc_gp3_groups[] = { +"gpio59" ,"gpio82" , +}; +static const char *const gps_tx_a_groups[] = { +"gpio65" , +}; +static const char *const gps_tx_b_groups[] = { +"gpio98" , +}; +static const char *const gps_tx_c_groups[] = { +"gpio80" , +}; +static const char *const isense_dbg_groups[] = { +"gpio68" , +}; +static const char *const jitter_bist_groups[] = { +"gpio35" , +}; +static const char *const ldo_en_groups[] = { +"gpio97" , +}; +static const char *const ldo_update_groups[] = { +"gpio98" , +}; +static const char *const m_voc_groups[] = { +"gpio28" , +}; +static const char *const mdp_vsync_groups[] = { +"gpio59" ,"gpio74" , +}; +static const char *const mdss_vsync0_groups[] = { +"gpio42" , +}; +static const char *const mdss_vsync1_groups[] = { +"gpio42" , +}; +static const char *const mdss_vsync2_groups[] = { +"gpio42" , +}; +static const char *const mdss_vsync3_groups[] = { +"gpio42" , +}; +static const char *const mss_lte_groups[] = { +"gpio81" ,"gpio82" , +}; +static const char *const nav_pps_a_groups[] = { +"gpio65" , +}; +static const char *const nav_pps_b_groups[] = { +"gpio98" , +}; +static const char *const nav_pps_c_groups[] = { +"gpio80" , +}; +static const char *const pa_indicator_groups[] = { +"gpio92" , +}; +static const char *const phase_flag0_groups[] = { +"gpio68" , +}; +static const char *const phase_flag1_groups[] = { +"gpio48" , +}; +static const char *const phase_flag2_groups[] = { +"gpio49" , +}; +static const char *const phase_flag3_groups[] = { +"gpio4" , +}; +static const char *const phase_flag4_groups[] = { +"gpio57" , +}; +static const char *const phase_flag5_groups[] = { +"gpio17" , +}; +static const char *const phase_flag6_groups[] = { +"gpio53" , +}; +static const char *const phase_flag7_groups[] = { +"gpio69" , +}; +static const char *const phase_flag8_groups[] = { +"gpio70" , +}; +static const char *const phase_flag9_groups[] = { +"gpio50" , +}; +static const char *const phase_flag10_groups[] = { +"gpio56" , +}; +static const char *const phase_flag11_groups[] = { +"gpio21" , +}; +static const char *const phase_flag12_groups[] = { +"gpio22" , +}; +static const char *const phase_flag13_groups[] = { +"gpio23" , +}; +static const char *const phase_flag14_groups[] = { +"gpio5" , +}; +static const char *const phase_flag15_groups[] = { +"gpio51" , +}; +static const char *const phase_flag16_groups[] = { +"gpio52" , +}; +static const char *const phase_flag17_groups[] = { +"gpio24" , +}; +static const char *const phase_flag18_groups[] = { +"gpio25" , +}; +static const char *const phase_flag19_groups[] = { +"gpio26" , +}; +static const char *const phase_flag20_groups[] = { +"gpio27" , +}; +static const char *const phase_flag21_groups[] = { +"gpio28" , +}; +static const char *const phase_flag22_groups[] = { +"gpio29" , +}; +static const char *const phase_flag23_groups[] = { +"gpio30" , +}; +static const char *const phase_flag24_groups[] = { +"gpio31" , +}; +static const char *const phase_flag25_groups[] = { +"gpio55" , +}; +static const char *const phase_flag26_groups[] = { +"gpio12" , +}; +static const char *const phase_flag27_groups[] = { +"gpio13" , +}; +static const char *const phase_flag28_groups[] = { +"gpio14" , +}; +static const char *const phase_flag29_groups[] = { +"gpio54" , +}; +static const char *const phase_flag30_groups[] = { +"gpio47" , +}; +static const char *const phase_flag31_groups[] = { +"gpio6" , +}; +static const char *const pll_bypassnl_groups[] = { +"gpio36" , +}; +static const char *const pll_reset_groups[] = { +"gpio37" , +}; +static const char *const pri_mi2s_groups[] = { +"gpio12" ,"gpio14" ,"gpio15" ,"gpio61" , +}; +static const char *const pri_mi2s_ws_groups[] = { +"gpio13" , +}; +static const char *const prng_rosc_groups[] = { +"gpio102" , +}; +static const char *const pwr_crypto_groups[] = { +"gpio33" , +}; +static const char *const pwr_modem_groups[] = { +"gpio31" , +}; +static const char *const pwr_nav_groups[] = { +"gpio32" , +}; +static const char *const qdss_cti0_a_groups[] = { +"gpio49" ,"gpio50" , +}; +static const char *const qdss_cti0_b_groups[] = { +"gpio13" ,"gpio21" , +}; +static const char *const qdss_cti1_a_groups[] = { +"gpio53" ,"gpio55" , +}; +static const char *const qdss_cti1_b_groups[] = { +"gpio12" ,"gpio66" , +}; +static const char *const qdss_gpio0_groups[] = { +"gpio32" ,"gpio67" , +}; +static const char *const qdss_gpio10_groups[] = { +"gpio43" ,"gpio77" , +}; +static const char *const qdss_gpio11_groups[] = { +"gpio44" ,"gpio79" , +}; +static const char *const qdss_gpio12_groups[] = { +"gpio45" ,"gpio80" , +}; +static const char *const qdss_gpio13_groups[] = { +"gpio46" ,"gpio78" , +}; +static const char *const qdss_gpio14_groups[] = { +"gpio47" ,"gpio72" , +}; +static const char *const qdss_gpio15_groups[] = { +"gpio48" ,"gpio73" , +}; +static const char *const qdss_gpio1_groups[] = { +"gpio33" ,"gpio63" , +}; +static const char *const qdss_gpio2_groups[] = { +"gpio34" ,"gpio64" , +}; +static const char *const qdss_gpio3_groups[] = { +"gpio35" ,"gpio56" , +}; +static const char *const qdss_gpio4_groups[] = { +"gpio0" ,"gpio36" , +}; +static const char *const qdss_gpio5_groups[] = { +"gpio1" ,"gpio37" , +}; +static const char *const qdss_gpio6_groups[] = { +"gpio38" ,"gpio70" , +}; +static const char *const qdss_gpio7_groups[] = { +"gpio39" ,"gpio71" , +}; +static const char *const qdss_gpio8_groups[] = { +"gpio51" ,"gpio75" , +}; +static const char *const qdss_gpio9_groups[] = { +"gpio42" ,"gpio76" , +}; +static const char *const qdss_gpio_groups[] = { +"gpio31" ,"gpio52" ,"gpio68" ,"gpio69" , +}; +static const char *const qlink_enable_groups[] = { +"gpio100" , +}; +static const char *const qlink_request_groups[] = { +"gpio99" , +}; +static const char *const qspi_clk_groups[] = { +"gpio47" , +}; +static const char *const qspi_cs_groups[] = { +"gpio43" ,"gpio50" , +}; +static const char *const qspi_data0_groups[] = { +"gpio33" , +}; +static const char *const qspi_data1_groups[] = { +"gpio34" , +}; +static const char *const qspi_data2_groups[] = { +"gpio35" , +}; +static const char *const qspi_data3_groups[] = { +"gpio51" , +}; +static const char *const qspi_resetn_groups[] = { +"gpio48" , +}; +static const char *const sec_mi2s_groups[] = { +"gpio24" ,"gpio25" ,"gpio26" ,"gpio27" ,"gpio62" , +}; +static const char *const sndwire_clk_groups[] = { +"gpio24" , +}; +static const char *const sndwire_data_groups[] = { +"gpio25" , +}; +static const char *const sp_cmu_groups[] = { +"gpio64" , +}; +static const char *const ssc_irq_groups[] = { +"gpio67" ,"gpio68" ,"gpio69" ,"gpio70" ,"gpio71" ,"gpio72" ,"gpio74" , +"gpio75" ,"gpio76" , +}; +static const char *const tgu_ch0_groups[] = { +"gpio0" , +}; +static const char *const tgu_ch1_groups[] = { +"gpio1" , +}; +static const char *const tsense_pwm1_groups[] = { +"gpio71" , +}; +static const char *const tsense_pwm2_groups[] = { +"gpio71" , +}; +static const char *const uim1_clk_groups[] = { +"gpio88" , +}; +static const char *const uim1_data_groups[] = { +"gpio87" , +}; +static const char *const uim1_present_groups[] = { +"gpio90" , +}; +static const char *const uim1_reset_groups[] = { +"gpio89" , +}; +static const char *const uim2_clk_groups[] = { +"gpio84" , +}; +static const char *const uim2_data_groups[] = { +"gpio83" , +}; +static const char *const uim2_present_groups[] = { +"gpio86" , +}; +static const char *const uim2_reset_groups[] = { +"gpio85" , +}; +static const char *const uim_batt_groups[] = { +"gpio91" , +}; +static const char *const vfr_1_groups[] = { +"gpio27" , +}; +static const char *const vsense_clkout_groups[] = { +"gpio24" , +}; +static const char *const vsense_data0_groups[] = { +"gpio21" , +}; +static const char *const vsense_data1_groups[] = { +"gpio22" , +}; +static const char *const vsense_mode_groups[] = { +"gpio23" , +}; +static const char *const wlan1_adc0_groups[] = { +"gpio9" , +}; +static const char *const wlan1_adc1_groups[] = { +"gpio8" , +}; +static const char *const wlan2_adc0_groups[] = { +"gpio11" , +}; +static const char *const wlan2_adc1_groups[] = { +"gpio10" , +}; + +static const struct msm_function sdm660_functions[] = { +FUNCTION (adsp_ext), +FUNCTION (agera_pll), +FUNCTION (atest_char), +FUNCTION (atest_char0), +FUNCTION (atest_char1), +FUNCTION (atest_char2), +FUNCTION (atest_char3), +FUNCTION (atest_gpsadc0), +FUNCTION (atest_gpsadc1), +FUNCTION (atest_tsens), +FUNCTION (atest_tsens2), +FUNCTION (atest_usb1), +FUNCTION (atest_usb10), +FUNCTION (atest_usb11), +FUNCTION (atest_usb12), +FUNCTION (atest_usb13), +FUNCTION (atest_usb2), +FUNCTION (atest_usb20), +FUNCTION (atest_usb21), +FUNCTION (atest_usb22), +FUNCTION (atest_usb23), +FUNCTION (audio_ref), +FUNCTION (bimc_dte0), +FUNCTION (bimc_dte1), +FUNCTION (blsp_i2c1), +FUNCTION (blsp_i2c2), +FUNCTION (blsp_i2c3), +FUNCTION (blsp_i2c4), +FUNCTION (blsp_i2c5), +FUNCTION (blsp_i2c6), +FUNCTION (blsp_i2c7), +FUNCTION (blsp_i2c8_a), +FUNCTION (blsp_i2c8_b), +FUNCTION (blsp_spi1), +FUNCTION (blsp_spi2), +FUNCTION (blsp_spi3), +FUNCTION (blsp_spi3_cs1), +FUNCTION (blsp_spi3_cs2), +FUNCTION (blsp_spi4), +FUNCTION (blsp_spi5), +FUNCTION (blsp_spi6), +FUNCTION (blsp_spi7), +FUNCTION (blsp_spi8_a), +FUNCTION (blsp_spi8_b), +FUNCTION (blsp_spi8_cs1), +FUNCTION (blsp_spi8_cs2), +FUNCTION (blsp_uart1), +FUNCTION (blsp_uart2), +FUNCTION (blsp_uart5), +FUNCTION (blsp_uart6_a), +FUNCTION (blsp_uart6_b), +FUNCTION (blsp_uim1), +FUNCTION (blsp_uim2), +FUNCTION (blsp_uim5), +FUNCTION (blsp_uim6), +FUNCTION (cam_mclk), +FUNCTION (cci_async), +FUNCTION (cci_i2c), +FUNCTION (cri_trng), +FUNCTION (cri_trng0), +FUNCTION (cri_trng1), +FUNCTION (dbg_out), +FUNCTION (ddr_bist), +FUNCTION (gcc_gp1), +FUNCTION (gcc_gp2), +FUNCTION (gcc_gp3), +FUNCTION (gpio), +FUNCTION (gps_tx_a), +FUNCTION (gps_tx_b), +FUNCTION (gps_tx_c), +FUNCTION (isense_dbg), +FUNCTION (jitter_bist), +FUNCTION (ldo_en), +FUNCTION (ldo_update), +FUNCTION (m_voc), +FUNCTION (mdp_vsync), +FUNCTION (mdss_vsync0), +FUNCTION (mdss_vsync1), +FUNCTION (mdss_vsync2), +FUNCTION (mdss_vsync3), +FUNCTION (mss_lte), +FUNCTION (nav_pps_a), +FUNCTION (nav_pps_b), +FUNCTION (nav_pps_c), +FUNCTION (pa_indicator), +FUNCTION (phase_flag0), +FUNCTION (phase_flag1), +FUNCTION (phase_flag2), +FUNCTION (phase_flag3), +FUNCTION (phase_flag4), +FUNCTION (phase_flag5), +FUNCTION (phase_flag6), +FUNCTION (phase_flag7), +FUNCTION (phase_flag8), +FUNCTION (phase_flag9), +FUNCTION (phase_flag10), +FUNCTION (phase_flag11), +FUNCTION (phase_flag12), +FUNCTION (phase_flag13), +FUNCTION (phase_flag14), +FUNCTION (phase_flag15), +FUNCTION (phase_flag16), +FUNCTION (phase_flag17), +FUNCTION (phase_flag18), +FUNCTION (phase_flag19), +FUNCTION (phase_flag20), +FUNCTION (phase_flag21), +FUNCTION (phase_flag22), +FUNCTION (phase_flag23), +FUNCTION (phase_flag24), +FUNCTION (phase_flag25), +FUNCTION (phase_flag26), +FUNCTION (phase_flag27), +FUNCTION (phase_flag28), +FUNCTION (phase_flag29), +FUNCTION (phase_flag30), +FUNCTION (phase_flag31), +FUNCTION (pll_bypassnl), +FUNCTION (pll_reset), +FUNCTION (pri_mi2s), +FUNCTION (pri_mi2s_ws), +FUNCTION (prng_rosc), +FUNCTION (pwr_crypto), +FUNCTION (pwr_modem), +FUNCTION (pwr_nav), +FUNCTION (qdss_cti0_a), +FUNCTION (qdss_cti0_b), +FUNCTION (qdss_cti1_a), +FUNCTION (qdss_cti1_b), +FUNCTION (qdss_gpio), +FUNCTION (qdss_gpio0), +FUNCTION (qdss_gpio1), +FUNCTION (qdss_gpio10), +FUNCTION (qdss_gpio11), +FUNCTION (qdss_gpio12), +FUNCTION (qdss_gpio13), +FUNCTION (qdss_gpio14), +FUNCTION (qdss_gpio15), +FUNCTION (qdss_gpio2), +FUNCTION (qdss_gpio3), +FUNCTION (qdss_gpio4), +FUNCTION (qdss_gpio5), +FUNCTION (qdss_gpio6), +FUNCTION (qdss_gpio7), +FUNCTION (qdss_gpio8), +FUNCTION (qdss_gpio9), +FUNCTION (qlink_enable), +FUNCTION (qlink_request), +FUNCTION (qspi_clk), +FUNCTION (qspi_cs), +FUNCTION (qspi_data0), +FUNCTION (qspi_data1), +FUNCTION (qspi_data2), +FUNCTION (qspi_data3), +FUNCTION (qspi_resetn), +FUNCTION (sec_mi2s), +FUNCTION (sndwire_clk), +FUNCTION (sndwire_data), +FUNCTION (sp_cmu), +FUNCTION (ssc_irq), +FUNCTION (tgu_ch0), +FUNCTION (tgu_ch1), +FUNCTION (tsense_pwm1), +FUNCTION (tsense_pwm2), +FUNCTION (uim1_clk), +FUNCTION (uim1_data), +FUNCTION (uim1_present), +FUNCTION (uim1_reset), +FUNCTION (uim2_clk), +FUNCTION (uim2_data), +FUNCTION (uim2_present), +FUNCTION (uim2_reset), +FUNCTION (uim_batt), +FUNCTION (vfr_1), +FUNCTION (vsense_clkout), +FUNCTION (vsense_data0), +FUNCTION (vsense_data1), +FUNCTION (vsense_mode), +FUNCTION (wlan1_adc0), +FUNCTION (wlan1_adc1), +FUNCTION (wlan2_adc0), +FUNCTION (wlan2_adc1), +}; + +static const struct msm_pingroup sdm660_groups[] = { +PINGROUP (0 ,SOUTH , blsp_spi1, blsp_uart1, blsp_uim1, tgu_ch0, _, _, qdss_gpio4, atest_gpsadc1, _), +PINGROUP (1 ,SOUTH , blsp_spi1, blsp_uart1, blsp_uim1, tgu_ch1, _, _, qdss_gpio5, atest_gpsadc0, _), +PINGROUP (2 ,SOUTH , blsp_spi1, blsp_uart1, blsp_i2c1, _, _, _, _, _, _), +PINGROUP (3 ,SOUTH , blsp_spi1, blsp_uart1, blsp_i2c1, ddr_bist, _, _, atest_tsens2, atest_usb1, _), +PINGROUP (4 ,NORTH , blsp_spi2, blsp_uim2, blsp_uart2, phase_flag3, _, _, _, _, _), +PINGROUP (5 ,SOUTH , blsp_spi2, blsp_uim2, blsp_uart2, phase_flag14, _, _, _, _, _), +PINGROUP (6 ,SOUTH , blsp_spi2, blsp_i2c2, blsp_uart2, phase_flag31, _, _, _, _, _), +PINGROUP (7 ,SOUTH , blsp_spi2, blsp_i2c2, blsp_uart2, _, _, _, _, _, _), +PINGROUP (8 ,NORTH , blsp_spi3, ddr_bist, _, _, _, wlan1_adc1, atest_usb13, bimc_dte1, _), +PINGROUP (9 ,NORTH , blsp_spi3, ddr_bist, _, _, _, wlan1_adc0, atest_usb12, bimc_dte0, _), +PINGROUP (10 ,NORTH , blsp_spi3, blsp_i2c3, ddr_bist, _, _, wlan2_adc1, atest_usb11, bimc_dte1, _), +PINGROUP (11 ,NORTH , blsp_spi3, blsp_i2c3, _, dbg_out, wlan2_adc0, atest_usb10, bimc_dte0, _, _), +PINGROUP (12 ,NORTH , blsp_spi4, pri_mi2s, _, phase_flag26, qdss_cti1_b, _, _, _, _), +PINGROUP (13 ,NORTH , blsp_spi4, _, pri_mi2s_ws, _, _, phase_flag27, qdss_cti0_b, _, _), +PINGROUP (14 ,NORTH , blsp_spi4, blsp_i2c4, pri_mi2s, _, phase_flag28, _, _, _, _), +PINGROUP (15 ,NORTH , blsp_spi4, blsp_i2c4, pri_mi2s, _, _, _, _, _, _), +PINGROUP (16 ,CENTER , blsp_uart5, blsp_spi5, blsp_uim5, _, _, _, _, _, _), +PINGROUP (17 ,CENTER , blsp_uart5, blsp_spi5, blsp_uim5, _, phase_flag5, _, _, _, _), +PINGROUP (18 ,CENTER , blsp_uart5, blsp_spi5, blsp_i2c5, _, _, _, _, _, _), +PINGROUP (19 ,CENTER , blsp_uart5, blsp_spi5, blsp_i2c5, _, _, _, _, _, _), +PINGROUP (20 ,SOUTH , _, _, blsp_uim6, _, _, _, _, _, _), +PINGROUP (21 ,SOUTH , _, _, blsp_uim6, _, phase_flag11, qdss_cti0_b, vsense_data0, _, _), +PINGROUP (22 ,CENTER , blsp_spi6, _, blsp_i2c6, _, phase_flag12, vsense_data1, _, _, _), +PINGROUP (23 ,CENTER , blsp_spi6, _, blsp_i2c6, _, phase_flag13, vsense_mode, _, _, _), +PINGROUP (24 ,NORTH , blsp_spi7, blsp_uart6_a, sec_mi2s, sndwire_clk, _, _, phase_flag17, vsense_clkout, _), +PINGROUP (25 ,NORTH , blsp_spi7, blsp_uart6_a, sec_mi2s, sndwire_data, _, _, phase_flag18, _, _), +PINGROUP (26 ,NORTH , blsp_spi7, blsp_uart6_a, blsp_i2c7, sec_mi2s, _, phase_flag19, _, _, _), +PINGROUP (27 ,NORTH , blsp_spi7, blsp_uart6_a, blsp_i2c7, vfr_1, sec_mi2s, _, phase_flag20, _, _), +PINGROUP (28 ,CENTER , blsp_spi8_a, blsp_uart6_b, m_voc, _, phase_flag21, _, _, _, _), +PINGROUP (29 ,CENTER , blsp_spi8_a, blsp_uart6_b, _, _, phase_flag22, _, _, _, _), +PINGROUP (30 ,CENTER , blsp_spi8_a, blsp_uart6_b, blsp_i2c8_a, blsp_spi3_cs1, _, phase_flag23, _, _, _), +PINGROUP (31 ,CENTER , blsp_spi8_a, blsp_uart6_b, blsp_i2c8_a, pwr_modem, _, phase_flag24, qdss_gpio, _, _), +PINGROUP (32 ,SOUTH , cam_mclk, pwr_nav, _, _, qdss_gpio0, _, _, _, _), +PINGROUP (33 ,SOUTH , cam_mclk, qspi_data0, pwr_crypto, _, _, qdss_gpio1, _, _, _), +PINGROUP (34 ,SOUTH , cam_mclk, qspi_data1, agera_pll, _, _, qdss_gpio2, _, _, _), +PINGROUP (35 ,SOUTH , cam_mclk, qspi_data2, jitter_bist, _, _, qdss_gpio3, _, atest_usb2, _), +PINGROUP (36 ,SOUTH , cci_i2c, pll_bypassnl, agera_pll, _, _, qdss_gpio4, atest_tsens, atest_usb21, _), +PINGROUP (37 ,SOUTH , cci_i2c, pll_reset, _, _, qdss_gpio5, atest_usb23, _, _, _), +PINGROUP (38 ,SOUTH , cci_i2c, _, _, qdss_gpio6, _, _, _, _, _), +PINGROUP (39 ,SOUTH , cci_i2c, _, _, qdss_gpio7, _, _, _, _, _), +PINGROUP (40 ,SOUTH , _, _, blsp_spi8_b, _, _, _, _, _, _), +PINGROUP (41 ,SOUTH , _, _, blsp_spi8_b, _, _, _, _, _, _), +PINGROUP (42 ,SOUTH , mdss_vsync0, mdss_vsync1, mdss_vsync2, mdss_vsync3, _, _, qdss_gpio9, _, _), +PINGROUP (43 ,SOUTH , _, _, qspi_cs, _, _, qdss_gpio10, _, _, _), +PINGROUP (44 ,SOUTH , _, _, blsp_spi8_b, blsp_i2c8_b, _, _, qdss_gpio11, _, _), +PINGROUP (45 ,SOUTH , cci_async, _, _, qdss_gpio12, _, _, _, _, _), +PINGROUP (46 ,SOUTH , blsp_spi1, _, _, qdss_gpio13, _, _, _, _, _), +PINGROUP (47 ,SOUTH , qspi_clk, _, phase_flag30, qdss_gpio14, _, _, _, _, _), +PINGROUP (48 ,SOUTH , _, phase_flag1, qdss_gpio15, _, _, _, _, _, _), +PINGROUP (49 ,SOUTH , blsp_spi6, phase_flag2, qdss_cti0_a, _, _, _, _, _, _), +PINGROUP (50 ,SOUTH , qspi_cs, _, phase_flag9, qdss_cti0_a, _, _, _, _, _), +PINGROUP (51 ,SOUTH , qspi_data3, _, phase_flag15, qdss_gpio8, _, _, _, _, _), +PINGROUP (52 ,SOUTH , _, blsp_spi8_b, blsp_i2c8_b, blsp_spi6, phase_flag16, qdss_gpio, _, _, _), +PINGROUP (53 ,NORTH , _, phase_flag6, qdss_cti1_a, _, _, _, _, _, _), +PINGROUP (54 ,NORTH , _, _, phase_flag29, _, _, _, _, _, _), +PINGROUP (55 ,SOUTH , _, phase_flag25, qdss_cti1_a, _, _, _, _, _, _), +PINGROUP (56 ,SOUTH , _, phase_flag10, qdss_gpio3, _, atest_usb20, _, _, _, _), +PINGROUP (57 ,SOUTH , gcc_gp1, _, phase_flag4, atest_usb22, _, _, _, _, _), +PINGROUP (58 ,SOUTH , _, gcc_gp2, _, _, atest_char, _, _, _, _), +PINGROUP (59 ,NORTH , mdp_vsync, gcc_gp3, _, _, atest_char3, _, _, _, _), +PINGROUP (60 ,NORTH , cri_trng0, _, _, atest_char2, _, _, _, _, _), +PINGROUP (61 ,NORTH , pri_mi2s, cri_trng1, _, _, atest_char1, _, _, _, _), +PINGROUP (62 ,NORTH , sec_mi2s, audio_ref, _, cri_trng, _, _, atest_char0, _, _), +PINGROUP (63 ,NORTH , _, _, _, qdss_gpio1, _, _, _, _, _), +PINGROUP (64 ,SOUTH , blsp_spi8_cs1, sp_cmu, _, _, qdss_gpio2, _, _, _, _), +PINGROUP (65 ,SOUTH , _, nav_pps_a, nav_pps_a, gps_tx_a, blsp_spi3_cs2, adsp_ext, _, _, _), +PINGROUP (66 ,NORTH , _, _, qdss_cti1_b, _, _, _, _, _, _), +PINGROUP (67 ,NORTH , _, _, qdss_gpio0, _, _, _, _, _, _), +PINGROUP (68 ,NORTH , isense_dbg, _, phase_flag0, qdss_gpio, _, _, _, _, _), +PINGROUP (69 ,NORTH , _, phase_flag7, qdss_gpio, _, _, _, _, _, _), +PINGROUP (70 ,NORTH , _, phase_flag8, qdss_gpio6, _, _, _, _, _, _), +PINGROUP (71 ,NORTH , _, _, qdss_gpio7, tsense_pwm1, tsense_pwm2, _, _, _, _), +PINGROUP (72 ,NORTH , _, qdss_gpio14, _, _, _, _, _, _, _), +PINGROUP (73 ,NORTH , _, _, qdss_gpio15, _, _, _, _, _, _), +PINGROUP (74 ,NORTH , mdp_vsync, _, _, _, _, _, _, _, _), +PINGROUP (75 ,NORTH , _, _, qdss_gpio8, _, _, _, _, _, _), +PINGROUP (76 ,NORTH , blsp_spi8_cs2, _, _, _, qdss_gpio9, _, _, _, _), +PINGROUP (77 ,NORTH , _, _, qdss_gpio10, _, _, _, _, _, _), +PINGROUP (78 ,NORTH , gcc_gp1, _, qdss_gpio13, _, _, _, _, _, _), +PINGROUP (79 ,SOUTH , _, _, qdss_gpio11, _, _, _, _, _, _), +PINGROUP (80 ,SOUTH , nav_pps_b, nav_pps_b, gps_tx_c, _, _, qdss_gpio12, _, _, _), +PINGROUP (81 ,CENTER , mss_lte, gcc_gp2, _, _, _, _, _, _, _), +PINGROUP (82 ,CENTER , mss_lte, gcc_gp3, _, _, _, _, _, _, _), +PINGROUP (83 ,SOUTH , uim2_data, _, _, _, _, _, _, _, _), +PINGROUP (84 ,SOUTH , uim2_clk, _, _, _, _, _, _, _, _), +PINGROUP (85 ,SOUTH , uim2_reset, _, _, _, _, _, _, _, _), +PINGROUP (86 ,SOUTH , uim2_present, _, _, _, _, _, _, _, _), +PINGROUP (87 ,SOUTH , uim1_data, _, _, _, _, _, _, _, _), +PINGROUP (88 ,SOUTH , uim1_clk, _, _, _, _, _, _, _, _), +PINGROUP (89 ,SOUTH , uim1_reset, _, _, _, _, _, _, _, _), +PINGROUP (90 ,SOUTH , uim1_present, _, _, _, _, _, _, _, _), +PINGROUP (91 ,SOUTH , uim_batt, _, _, _, _, _, _, _, _), +PINGROUP (92 ,SOUTH , _, _, pa_indicator, _, _, _, _, _, _), +PINGROUP (93 ,SOUTH , _, _, _, _, _, _, _, _, _), +PINGROUP (94 ,SOUTH , _, _, _, _, _, _, _, _, _), +PINGROUP (95 ,SOUTH , _, _, _, _, _, _, _, _, _), +PINGROUP (96 ,SOUTH , _, _, _, _, _, _, _, _, _), +PINGROUP (97 ,SOUTH , _, ldo_en, _, _, _, _, _, _, _), +PINGROUP (98 ,SOUTH , _, nav_pps_c, nav_pps_c, gps_tx_b, ldo_update, _, _, _, _), +PINGROUP (99 ,SOUTH , qlink_request, _, _, _, _, _, _, _, _), +PINGROUP (100 ,SOUTH , qlink_enable, _, _, _, _, _, _, _, _), +PINGROUP (101 ,SOUTH , _, _, _, _, _, _, _, _, _), +PINGROUP (102 ,SOUTH , _, prng_rosc, _, _, _, _, _, _, _), +PINGROUP (103 ,SOUTH , _, _, _, _, _, _, _, _, _), +PINGROUP (104 ,SOUTH , _, _, _, _, _, _, _, _, _), +PINGROUP (105 ,SOUTH , _, _, _, _, _, _, _, _, _), +PINGROUP (106 ,SOUTH , _, _, _, _, _, _, _, _, _), +PINGROUP (107 ,SOUTH , _, _, _, _, _, _, _, _, _), +PINGROUP (108 ,SOUTH , _, _, _, _, _, _, _, _, _), +PINGROUP (109 ,SOUTH , _, _, _, _, _, _, _, _, _), +PINGROUP (110 ,SOUTH , _, _, _, _, _, _, _, _, _), +PINGROUP (111 ,SOUTH , _, _, _, _, _, _, _, _, _), +PINGROUP (112 ,SOUTH , _, _, _, _, _, _, _, _, _), +PINGROUP (113 ,SOUTH , _, _, _, _, _, _, _, _, _), +SDC_QDSD_PINGROUP (sdc1_clk,0x99a000 ,13 ,6 ), +SDC_QDSD_PINGROUP (sdc1_cmd,0x99a000 ,11 ,3 ), +SDC_QDSD_PINGROUP (sdc1_data,0x99a000 ,9 ,0 ), +SDC_QDSD_PINGROUP (sdc2_clk,0x99b000 ,14 ,6 ), +SDC_QDSD_PINGROUP (sdc2_cmd,0x99b000 ,11 ,3 ), +SDC_QDSD_PINGROUP (sdc2_data,0x99b000 ,9 ,0 ), +SDC_QDSD_PINGROUP (sdc1_rclk,0x99a000 ,15 ,0 ), +}; + +static const struct msm_pinctrl_soc_data sdm660_pinctrl = { + .pins = sdm660_pins, + .npins =ARRAY_SIZE (sdm660_pins), + .functions = sdm660_functions, + .nfunctions =ARRAY_SIZE (sdm660_functions), + .groups = sdm660_groups, + .ngroups =ARRAY_SIZE (sdm660_groups), + .ngpios =114 , + .tiles = sdm660_tiles, + .ntiles =ARRAY_SIZE (sdm660_tiles), +}; + +static int sdm660_pinctrl_probe (struct platform_device *pdev) +{ +return msm_pinctrl_probe (pdev, &sdm660_pinctrl); +} + +static const struct of_device_id sdm660_pinctrl_of_match[] = { + { .compatible ="qcom,sdm660-pinctrl" , }, + { .compatible ="qcom,sdm630-pinctrl" , }, + { }, +}; + +static struct platform_driver sdm660_pinctrl_driver = { + .driver = { + .name ="sdm660-pinctrl" , + .of_match_table = sdm660_pinctrl_of_match, + }, + .probe = sdm660_pinctrl_probe, + .remove = msm_pinctrl_remove, +}; + +static int __init sdm660_pinctrl_init (void ) +{ +return platform_driver_register (&sdm660_pinctrl_driver); +} +arch_initcall (sdm660_pinctrl_init); + +static void __exit sdm660_pinctrl_exit(void) +{ +platform_driver_unregister (&sdm660_pinctrl_driver); +} +module_exit (sdm660_pinctrl_exit); + +MODULE_DESCRIPTION ("QTI sdm660 pinctrl driver" ); +MODULE_LICENSE ("GPL v2" ); +MODULE_DEVICE_TABLE (of, sdm660_pinctrl_of_match);Signature · 1 line
2.18.0
Quoted 11 lines · Craig Tatlor
From: Neeraj Upadhyay <[email protected]>
Add initial pinctrl driver to support pin configuration with pinctrl framework for sdm660.
Based off CAF implementation.Signed-off-by Neeraj Upadhyay <[email protected]>Co-Developed-by Venkatesh Yadav Abbarapu <[email protected]>Signed-off-by Venkatesh Yadav Abbarapu <[email protected]>[craig: minor updates for upstreaming, updated tile handling]Signed-off-by Craig Tatlor <[email protected]>
Co-Developed-by? That was innovative.
Anyways, since there is also a signoff all is fine.
Patch applied with Björn's ACK.
Yours,
Linus Walleij
Hey,
You seem to have missed the bindings, it might be an idea to drop and reapply with the new ones I just sent off when they get a review.
Quoted 23 lines · Linus Walleij
Quoted 11 lines · Craig Tatlor
From: Neeraj Upadhyay <[email protected]>
Add initial pinctrl driver to support pin configuration with pinctrl framework for sdm660.
Based off CAF implementation.Signed-off-by Neeraj Upadhyay <[email protected]>Co-Developed-by Venkatesh Yadav Abbarapu <[email protected]>Signed-off-by Venkatesh Yadav Abbarapu <[email protected]>[craig: minor updates for upstreaming, updated tile handling]Signed-off-by Craig Tatlor <[email protected]>Co-Developed-by? That was innovative.
Anyways, since there is also a signoff all is fine.
Patch applied with Björn's ACK.
Yours,
Linus Walleij
Signature · 1 line
Sent from my Android device with K-9 Mail. Please excuse my brevity.
Quoted 1 line · Craig
You seem to have missed the bindings, it might be an idea to drop and reapply with the new ones I just sent off when they get a review.
Nah I just didn't coordinate things. It gets too messy sometimes, I will apply the bindings separately I guess.
Yours,
Linus Walleij
PATCH v4 1/2 pinctrl: qcom: Add sdm660 pinctrl driver
In reply to Craig TatlorFrom: Neeraj Upadhyay <[email protected]>
Add initial pinctrl driver to support pin configuration with pinctrl framework for sdm660.
Based off CAF implementation.
---
Changes from v3:
none
drivers/pinctrl/qcom/Kconfig | 9 + drivers/pinctrl/qcom/Makefile | 1 + drivers/pinctrl/qcom/pinctrl-sdm660.c | 1455 +++++++++++++++++++++++++ 3 files changed, 1465 insertions(+) create mode 100644 drivers/pinctrl/qcom/pinctrl-sdm660.c
Changes from V2:
Sort everything
Use tiles
Add sdm630 compatible
drivers/pinctrl/qcom/Kconfig +9 -0
@@ -155,6 +155,15 @@ config PINCTRL_QCOM_SSBI_PMIC which are using SSBI for communication with SoC. Example PMIC's devices are pm8058 and pm8921. +config PINCTRL_SDM660 + tristate "Qualcomm Technologies Inc SDM660 pin controller driver" + depends on GPIOLIB && OF + select PINCTRL_MSM + help + This is the pinctrl, pinmux, pinconf and gpiolib driver for the + Qualcomm Technologies Inc TLMM block found on the Qualcomm + Technologies Inc SDM660 platform. + config PINCTRL_SDM845 tristate "Qualcomm Technologies Inc SDM845 pin controller driver" depends on GPIOLIB && OF
drivers/pinctrl/qcom/Makefile +1 -0
@@ -20,4 +20,5 @@ obj-$(CONFIG_PINCTRL_QCOM_SPMI_PMIC) += pinctrl-spmi-gpio.o obj-$(CONFIG_PINCTRL_QCOM_SPMI_PMIC) += pinctrl-spmi-mpp.o obj-$(CONFIG_PINCTRL_QCOM_SSBI_PMIC) += pinctrl-ssbi-gpio.o obj-$(CONFIG_PINCTRL_QCOM_SSBI_PMIC) += pinctrl-ssbi-mpp.o +obj-$(CONFIG_PINCTRL_SDM660) += pinctrl-sdm660.o obj-$(CONFIG_PINCTRL_SDM845) += pinctrl-sdm845.o
drivers/pinctrl/qcom/pinctrl-sdm660.c new file +1455 -0
1,455 lines not on this page · raw message
Signature · 1 line
2.18.0
PATCH v4 2/2 dt-bindings: pinctrl: qcom: Add SDM660 pinctrl binding
Add the binding for the TLMM pinctrl block found in the SDM660 platform.
---
Changes from v3:
Updated for tile structure
change irq field
.../bindings/pinctrl/qcom,sdm660-pinctrl.txt | 181 ++++++++++++++++++ 1 file changed, 181 insertions(+) create mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt
Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt new file +191 -0
@@ -0,0 +1,191 @@ +Qualcomm Technologies, Inc. SDM660 TLMM block + +This binding describes the Top Level Mode Multiplexer block found in the +SDM660 platform. + +- compatible: + Usage: required + Value type: <string> + Definition: must be "qcom,sdm660-pinctrl" or + "qcom,sdm630-pinctrl". + +- reg: + Usage: required + Value type: <prop-encoded-array> + Definition: the base address and size of the north, center and south + TLMM tiles. + +- reg-names: + Usage: required + Value type: <stringlist> + Definition: names for the cells of reg, must contain "north", "center" + and "south". + +- interrupts: + Usage: required + Value type: <prop-encoded-array> + Definition: should specify the TLMM summary IRQ. + +- interrupt-controller: + Usage: required + Value type: <none> + Definition: identifies this node as an interrupt controller + +- #interrupt-cells: + Usage: required + Value type: <u32> + Definition: must be 2. Specifying the pin number and flags, as defined + in <dt-bindings/interrupt-controller/irq.h> + +- gpio-controller: + Usage: required + Value type: <none> + Definition: identifies this node as a gpio controller + +- gpio-ranges: + Usage: required + Value type: <prop-encoded-array> + Definition: Specifies the mapping between gpio controller and + pin-controller pins. + +- #gpio-cells: + Usage: required + Value type: <u32> + Definition: must be 2. Specifying the pin number and flags, as defined + in <dt-bindings/gpio/gpio.h> + +Please refer to ../gpio/gpio.txt and ../interrupt-controller/interrupts.txt for +a general description of GPIO and interrupt bindings. + +Please refer to pinctrl-bindings.txt in this directory for details of the +common pinctrl bindings used by client devices, including the meaning of the +phrase "pin configuration node". + +The pin configuration nodes act as a container for an arbitrary number of +subnodes. Each of these subnodes represents some desired configuration for a +pin, a group, or a list of pins or groups. This configuration can include the +mux function to select on those pin(s)/group(s), and various pin configuration +parameters, such as pull-up, drive strength, etc. + + +PIN CONFIGURATION NODES: + +The name of each subnode is not important; all subnodes should be enumerated +and processed purely based on their content. + +Each subnode only affects those parameters that are explicitly listed. In +other words, a subnode that lists a mux function but no pin configuration +parameters implies no information about any pin configuration parameters. +Similarly, a pin subnode that describes a pullup parameter implies no +information about e.g. the mux function. + + +The following generic properties as defined in pinctrl-bindings.txt are valid +to specify in a pin configuration subnode: + +- pins: + Usage: required + Value type: <string-array> + Definition: List of gpio pins affected by the properties specified in + this subnode. Valid pins are: + gpio0-gpio113, + Supports mux, bias and drive-strength + sdc1_clk, sdc1_cmd, sdc1_data sdc2_clk, sdc2_cmd, sdc2_data sdc1_rclk, + Supports bias and drive-strength + +- function: + Usage: required + Value type: <string> + Definition: Specify the alternative function to be configured for the + specified pins. Functions are only valid for gpio pins. + Valid values are: + adsp_ext, agera_pll, atest_char, atest_char0, atest_char1, + atest_char2, atest_char3, atest_gpsadc0, atest_gpsadc1, + atest_tsens, atest_tsens2, atest_usb1, atest_usb10, + atest_usb11, atest_usb12, atest_usb13, atest_usb2, + atest_usb20, atest_usb21, atest_usb22, atest_usb23, + audio_ref, bimc_dte0, bimc_dte1, blsp_i2c1, blsp_i2c2, + blsp_i2c3, blsp_i2c4, blsp_i2c5, blsp_i2c6, blsp_i2c7, + blsp_i2c8_a, blsp_i2c8_b, blsp_spi1, blsp_spi2, blsp_spi3, + blsp_spi3_cs1, blsp_spi3_cs2, blsp_spi4, blsp_spi5, + blsp_spi6, blsp_spi7, blsp_spi8_a, blsp_spi8_b, + blsp_spi8_cs1, blsp_spi8_cs2, blsp_uart1, blsp_uart2, + blsp_uart5, blsp_uart6_a, blsp_uart6_b, blsp_uim1, + blsp_uim2, blsp_uim5, blsp_uim6, cam_mclk, cci_async, + cci_i2c, cri_trng, cri_trng0, cri_trng1, dbg_out, ddr_bist, + gcc_gp1, gcc_gp2, gcc_gp3, gpio, gps_tx_a, gps_tx_b, gps_tx_c, + isense_dbg, jitter_bist, ldo_en, ldo_update, m_voc, mdp_vsync, + mdss_vsync0, mdss_vsync1, mdss_vsync2, mdss_vsync3, mss_lte, + nav_pps_a, nav_pps_b, nav_pps_c, pa_indicator, phase_flag0, + phase_flag1, phase_flag10, phase_flag11, phase_flag12, + phase_flag13, phase_flag14, phase_flag15, phase_flag16, + phase_flag17, phase_flag18, phase_flag19, phase_flag2, + phase_flag20, phase_flag21, phase_flag22, phase_flag23, + phase_flag24, phase_flag25, phase_flag26, phase_flag27, + phase_flag28, phase_flag29, phase_flag3, phase_flag30, + phase_flag31, phase_flag4, phase_flag5, phase_flag6, + phase_flag7, phase_flag8, phase_flag9, pll_bypassnl, + pll_reset, pri_mi2s, pri_mi2s_ws, prng_rosc, pwr_crypto, + pwr_modem, pwr_nav, qdss_cti0_a, qdss_cti0_b, qdss_cti1_a, + qdss_cti1_b, qdss_gpio, qdss_gpio0, qdss_gpio1, qdss_gpio10, + qdss_gpio11, qdss_gpio12, qdss_gpio13, qdss_gpio14, qdss_gpio15, + qdss_gpio2, qdss_gpio3, qdss_gpio4, qdss_gpio5, qdss_gpio6, + qdss_gpio7, qdss_gpio8, qdss_gpio9, qlink_enable, qlink_request, + qspi_clk, qspi_cs, qspi_data0, qspi_data1, qspi_data2, + qspi_data3, qspi_resetn, sec_mi2s, sndwire_clk, sndwire_data, + sp_cmu, ssc_irq, tgu_ch0, tgu_ch1, tsense_pwm1, tsense_pwm2, + uim1_clk, uim1_data, uim1_present, uim1_reset, uim2_clk, + uim2_data, uim2_present, uim2_reset, uim_batt, vfr_1, + vsense_clkout, vsense_data0, vsense_data1, vsense_mode, + wlan1_adc0, wlan1_adc1, wlan2_adc0, wlan2_adc1 + +- bias-disable: + Usage: optional + Value type: <none> + Definition: The specified pins should be configued as no pull. + +- bias-pull-down: + Usage: optional + Value type: <none> + Definition: The specified pins should be configued as pull down. + +- bias-pull-up: + Usage: optional + Value type: <none> + Definition: The specified pins should be configued as pull up. + +- output-high: + Usage: optional + Value type: <none> + Definition: The specified pins are configured in output mode, driven + high. + Not valid for sdc pins. + +- output-low: + Usage: optional + Value type: <none> + Definition: The specified pins are configured in output mode, driven + low. + Not valid for sdc pins. + +- drive-strength: + Usage: optional + Value type: <u32> + Definition: Selects the drive strength for the specified pins, in mA. + Valid values are: 2, 4, 6, 8, 10, 12, 14 and 16 + +Example: + + tlmm: pinctrl@3100000 { + compatible = "qcom,sdm660-pinctrl"; + reg = <0x3100000 0x200000>, + <0x3500000 0x200000>, + <0x3900000 0x200000>; + reg-names = "south", "center", "north"; + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + gpio-ranges = <&tlmm 0 0 114>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + };
Signature · 1 line
2.18.0
Re: [PATCH v4 2/2] dt-bindings: pinctrl: qcom: Add SDM660 pinctrl binding
Quoted 3 lines · Craig Tatlor
Add the binding for the TLMM pinctrl block found in the SDM660 platform.
Signed-off-by Craig Tatlor <[email protected]>
Thanks for the updates Craig.
Regards,
Bjorn
Quoted 208 lines
---
Changes from v3:
Updated for tile structure
change irq field.../bindings/pinctrl/qcom,sdm660-pinctrl.txt | 181 ++++++++++++++++++ 1 file changed, 181 insertions(+) create mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txtDocumentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt new file +191
-0@@ -0,0 +1,191 @@ +Qualcomm Technologies, Inc. SDM660 TLMM block + +This binding describes the Top Level Mode Multiplexer block found in the +SDM660 platform. + +- compatible: + Usage: required + Value type: <string> + Definition: must be "qcom,sdm660-pinctrl" or + "qcom,sdm630-pinctrl". + +- reg: + Usage: required + Value type: <prop-encoded-array> + Definition: the base address and size of the north, center and south + TLMM tiles. + +- reg-names: + Usage: required + Value type: <stringlist> + Definition: names for the cells of reg, must contain "north", "center" + and "south". + +- interrupts: + Usage: required + Value type: <prop-encoded-array> + Definition: should specify the TLMM summary IRQ. + +- interrupt-controller: + Usage: required + Value type: <none> + Definition: identifies this node as an interrupt controller + +- #interrupt-cells: + Usage: required + Value type: <u32> + Definition: must be 2. Specifying the pin number and flags, as defined + in <dt-bindings/interrupt-controller/irq.h> + +- gpio-controller: + Usage: required + Value type: <none> + Definition: identifies this node as a gpio controller + +- gpio-ranges: + Usage: required + Value type: <prop-encoded-array> + Definition: Specifies the mapping between gpio controller and + pin-controller pins. + +- #gpio-cells: + Usage: required + Value type: <u32> + Definition: must be 2. Specifying the pin number and flags, as defined + in <dt-bindings/gpio/gpio.h> + +Please refer to ../gpio/gpio.txt and ../interrupt-controller/interrupts.txt for +a general description of GPIO and interrupt bindings. + +Please refer to pinctrl-bindings.txt in this directory for details of the +common pinctrl bindings used by client devices, including the meaning of the +phrase "pin configuration node". + +The pin configuration nodes act as a container for an arbitrary number of +subnodes. Each of these subnodes represents some desired configuration for a +pin, a group, or a list of pins or groups. This configuration can include the +mux function to select on those pin(s)/group(s), and various pin configuration +parameters, such as pull-up, drive strength, etc. + + +PIN CONFIGURATION NODES: + +The name of each subnode is not important; all subnodes should be enumerated +and processed purely based on their content. + +Each subnode only affects those parameters that are explicitly listed. In +other words, a subnode that lists a mux function but no pin configuration +parameters implies no information about any pin configuration parameters. +Similarly, a pin subnode that describes a pullup parameter implies no +information about e.g. the mux function. + + +The following generic properties as defined in pinctrl-bindings.txt are valid +to specify in a pin configuration subnode: + +- pins: + Usage: required + Value type: <string-array> + Definition: List of gpio pins affected by the properties specified in + this subnode. Valid pins are: + gpio0-gpio113, + Supports mux, bias and drive-strength + sdc1_clk, sdc1_cmd, sdc1_data sdc2_clk, sdc2_cmd, sdc2_data sdc1_rclk, + Supports bias and drive-strength + +- function: + Usage: required + Value type: <string> + Definition: Specify the alternative function to be configured for the + specified pins. Functions are only valid for gpio pins. + Valid values are: + adsp_ext, agera_pll, atest_char, atest_char0, atest_char1, + atest_char2, atest_char3, atest_gpsadc0, atest_gpsadc1, + atest_tsens, atest_tsens2, atest_usb1, atest_usb10, + atest_usb11, atest_usb12, atest_usb13, atest_usb2, + atest_usb20, atest_usb21, atest_usb22, atest_usb23, + audio_ref, bimc_dte0, bimc_dte1, blsp_i2c1, blsp_i2c2, + blsp_i2c3, blsp_i2c4, blsp_i2c5, blsp_i2c6, blsp_i2c7, + blsp_i2c8_a, blsp_i2c8_b, blsp_spi1, blsp_spi2, blsp_spi3, + blsp_spi3_cs1, blsp_spi3_cs2, blsp_spi4, blsp_spi5, + blsp_spi6, blsp_spi7, blsp_spi8_a, blsp_spi8_b, + blsp_spi8_cs1, blsp_spi8_cs2, blsp_uart1, blsp_uart2, + blsp_uart5, blsp_uart6_a, blsp_uart6_b, blsp_uim1, + blsp_uim2, blsp_uim5, blsp_uim6, cam_mclk, cci_async, + cci_i2c, cri_trng, cri_trng0, cri_trng1, dbg_out, ddr_bist, + gcc_gp1, gcc_gp2, gcc_gp3, gpio, gps_tx_a, gps_tx_b, gps_tx_c, + isense_dbg, jitter_bist, ldo_en, ldo_update, m_voc, mdp_vsync, + mdss_vsync0, mdss_vsync1, mdss_vsync2, mdss_vsync3, mss_lte, + nav_pps_a, nav_pps_b, nav_pps_c, pa_indicator, phase_flag0, + phase_flag1, phase_flag10, phase_flag11, phase_flag12, + phase_flag13, phase_flag14, phase_flag15, phase_flag16, + phase_flag17, phase_flag18, phase_flag19, phase_flag2, + phase_flag20, phase_flag21, phase_flag22, phase_flag23, + phase_flag24, phase_flag25, phase_flag26, phase_flag27, + phase_flag28, phase_flag29, phase_flag3, phase_flag30, + phase_flag31, phase_flag4, phase_flag5, phase_flag6, + phase_flag7, phase_flag8, phase_flag9, pll_bypassnl, + pll_reset, pri_mi2s, pri_mi2s_ws, prng_rosc, pwr_crypto, + pwr_modem, pwr_nav, qdss_cti0_a, qdss_cti0_b, qdss_cti1_a, + qdss_cti1_b, qdss_gpio, qdss_gpio0, qdss_gpio1, qdss_gpio10, + qdss_gpio11, qdss_gpio12, qdss_gpio13, qdss_gpio14, qdss_gpio15, + qdss_gpio2, qdss_gpio3, qdss_gpio4, qdss_gpio5, qdss_gpio6, + qdss_gpio7, qdss_gpio8, qdss_gpio9, qlink_enable, qlink_request, + qspi_clk, qspi_cs, qspi_data0, qspi_data1, qspi_data2, + qspi_data3, qspi_resetn, sec_mi2s, sndwire_clk, sndwire_data, + sp_cmu, ssc_irq, tgu_ch0, tgu_ch1, tsense_pwm1, tsense_pwm2, + uim1_clk, uim1_data, uim1_present, uim1_reset, uim2_clk, + uim2_data, uim2_present, uim2_reset, uim_batt, vfr_1, + vsense_clkout, vsense_data0, vsense_data1, vsense_mode, + wlan1_adc0, wlan1_adc1, wlan2_adc0, wlan2_adc1 + +- bias-disable: + Usage: optional + Value type: <none> + Definition: The specified pins should be configued as no pull. + +- bias-pull-down: + Usage: optional + Value type: <none> + Definition: The specified pins should be configued as pull down. + +- bias-pull-up: + Usage: optional + Value type: <none> + Definition: The specified pins should be configued as pull up. + +- output-high: + Usage: optional + Value type: <none> + Definition: The specified pins are configured in output mode, driven + high. + Not valid for sdc pins. + +- output-low: + Usage: optional + Value type: <none> + Definition: The specified pins are configured in output mode, driven + low. + Not valid for sdc pins. + +- drive-strength: + Usage: optional + Value type: <u32> + Definition: Selects the drive strength for the specified pins, in mA. + Valid values are: 2, 4, 6, 8, 10, 12, 14 and 16 + +Example: + + tlmm: pinctrl@3100000 { + compatible = "qcom,sdm660-pinctrl"; + reg = <0x3100000 0x200000>, + <0x3500000 0x200000>, + <0x3900000 0x200000>; + reg-names = "south", "center", "north"; + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + gpio-ranges = <&tlmm 0 0 114>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + };Signature · 1 line
2.18.0
Re: [PATCH v4 2/2] dt-bindings: pinctrl: qcom: Add SDM660 pinctrl binding
In reply to Craig TatlorQuoted 12 lines · Craig Tatlor
Add the binding for the TLMM pinctrl block found in the SDM660 platform.
Signed-off-by Craig Tatlor <[email protected]>---
Changes from v3:
Updated for tile structure
change irq field.../bindings/pinctrl/qcom,sdm660-pinctrl.txt | 181 ++++++++++++++++++ 1 file changed, 181 insertions(+) create mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt
Re: [PATCH v4 2/2] dt-bindings: pinctrl: qcom: Add SDM660 pinctrl binding
In reply to Craig TatlorQuoted 7 lines · Craig Tatlor
Add the binding for the TLMM pinctrl block found in the SDM660 platform.
Signed-off-by Craig Tatlor <[email protected]>---
Changes from v3:
Updated for tile structure
change irq field
This v3 applied with the ACKs.
Yours,
Linus Walleij