Skip to contentSkip to conversation

Add a standard authorization framework

PATCH Superseded Daniel P. Berrangé 1 participant 13 messages Aug 16, 2018 – Aug 29, 2018

Subsystems (2)

v4 of 8 Superseded Latest is v8 →

lore
Share & tools
lore
#0 lore raw

v4 cover Add a standard authorization framework

An update to

v2: https://lists.gnu.org/archive/html/qemu-devel/2018-06/msg04469.html
v3: https://lists.gnu.org/archive/html/qemu-devel/2018-06/msg05660.html

The current network services now support encryption via TLS and in some cases support authentication via SASL. In cases where SASL is not available, x509 client certificates can be used as a crude authorization scheme, but using a sub-CA and controlling who you give certs to. In general this is not very flexible though, so this series introduces a new standard authorization framework.

It comes with four initial authorization mechanisms

- Simple - an exact username match. This is useful when there is exactly one user that is known to connect. For example when live migrating from one QEMU to another with TLS, libvirt would use the simple scheme to whitelist the TLS cert of the source QEMU.

- List - an full access control list, with optional regex matching. This is more flexible and is used to provide 100% backcompat with the existing HMP ACL commands. The caveat is that we can't create these via the CLI -object arg yet.

- ListFile - the same as List, but with the rules stored in JSON format in an external file. This avoids the -object limitation while also allowing the admin to change list entries on the file. QEMU uses inotify to notice these changes and auto-reload the file contents. This is likely a good default choice for most network services, if the "simple" mechanism isn't sufficient.

- PAM - delegate the username lookup to a PAM module, which opens the door to many options including things like SQL/LDAP lookups.

A later series that follows will integrate this framework into the VNC, NBD, migration, and character device servers.

Changed in v4:

- Rebase to latest git master

Changed in v3:

- Added docs for object types in qemu-options.hx
- Added example CLI syntax in header files
- Improved commit messages

Changed in v2:

- Switch to a global shared instance of the file monitor so only a single inotify file descriptor is required

- Require all watches to be registered against directories. File watches are useless in Linux, since they are tied to inodes, and so stop working when editors save by doing a tmpfile + rename dance.

- Change auth list impl to use a directory based watch instead of filename

- Put MTP const-ness fixes in separate patch

- Split QOM change off into separate patch

- Fix conditionals on Win32 build

Daniel P. Berrangé (11):
util: add helper APIs for dealing with inotify in portable manner
qom: don't require user creatable objects to be registered hw/usb: don't set IN_ISDIR for inotify watch in MTP driver hw/usb: fix const-ness for string params in MTP driver hw/usb: switch MTP to use new inotify APIs
authz: add QAuthZ object as an authorization base class
authz: add QAuthZSimple object type for easy whitelist auth checks
authz: add QAuthZList object type for an access control list
authz: add QAuthZListFile object type for a file access control list
authz: add QAuthZPAM object type for authorizing using PAM
authz: delete existing ACL implementation

 .gitignore                     |   4 +
 MAINTAINERS                    |  14 ++
 Makefile                       |  17 +-
 Makefile.objs                  |  10 ++
 Makefile.target                |   2 +
 authz/Makefile.objs            |   7 +
 authz/base.c                   |  82 +++++++++
 authz/list.c                   | 315 +++++++++++++++++++++++++++++++++
 authz/listfile.c               | 284 +++++++++++++++++++++++++++++
 authz/pamacct.c                | 149 ++++++++++++++++
 authz/simple.c                 | 122 +++++++++++++
 authz/trace-events             |  18 ++
 configure                      |  37 ++++
 crypto/tlssession.c            |  35 ++--
 crypto/trace-events            |   2 +-
 hw/usb/dev-mtp.c               | 257 ++++++++++-----------------
 hw/usb/trace-events            |   2 +-
 include/authz/base.h           | 112 ++++++++++++
 include/authz/list.h           | 106 +++++++++++
 include/authz/listfile.h       | 110 ++++++++++++
 include/authz/pamacct.h        | 100 +++++++++++
 include/authz/simple.h         |  84 +++++++++
 include/qemu/acl.h             |  66 -------
 include/qemu/filemonitor.h     | 117 ++++++++++++
 monitor.c                      | 180 ++++++++++++-------
 qapi/authz.json                |  58 ++++++
 qapi/qapi-schema.json          |   1 +
 qemu-options.hx                | 103 +++++++++++
 qom/object.c                   |  12 +-
 qom/object_interfaces.c        |  16 +-
 tests/Makefile.include         |   8 +-
 tests/test-authz-list.c        | 171 ++++++++++++++++++
 tests/test-crypto-tlssession.c |  15 +-
 tests/test-io-channel-tls.c    |  16 +-
 ui/vnc-auth-sasl.c             |  23 ++-
 ui/vnc-auth-sasl.h             |   5 +-
 ui/vnc-auth-vencrypt.c         |   2 +-
 ui/vnc-ws.c                    |   2 +-
 ui/vnc.c                       |  37 ++--
 ui/vnc.h                       |   4 +-
 util/Makefile.objs             |   2 +-
 util/acl.c                     | 179 -------------------
 util/filemonitor.c             | 315 +++++++++++++++++++++++++++++++++
 util/trace-events              |   9 +
 44 files changed, 2671 insertions(+), 539 deletions(-)
 create mode 100644 authz/Makefile.objs
 create mode 100644 authz/base.c
 create mode 100644 authz/list.c
 create mode 100644 authz/listfile.c
 create mode 100644 authz/pamacct.c
 create mode 100644 authz/simple.c
 create mode 100644 authz/trace-events
 create mode 100644 include/authz/base.h
 create mode 100644 include/authz/list.h
 create mode 100644 include/authz/listfile.h
 create mode 100644 include/authz/pamacct.h
 create mode 100644 include/authz/simple.h
 delete mode 100644 include/qemu/acl.h
 create mode 100644 include/qemu/filemonitor.h
 create mode 100644 qapi/authz.json
 create mode 100644 tests/test-authz-list.c
 delete mode 100644 util/acl.c
 create mode 100644 util/filemonitor.c
Signature · 1 line
2.17.1
#1 lore raw

PATCH v4 1/11 util: add helper APIs for dealing with inotify in portable manner

The inotify userspace API for reading events is quite horrible, so it is useful to wrap it in a more friendly API to avoid duplicating code across many users in QEMU. Wrapping it also allows introduction of a platform portability layer, so that we can add impls for non-Linux based equivalents in future.

---
 MAINTAINERS                |   6 +
 include/qemu/filemonitor.h | 117 ++++++++++++++
 util/Makefile.objs         |   1 +
 util/filemonitor.c         | 315 +++++++++++++++++++++++++++++++++++++
 util/trace-events          |   9 ++
 5 files changed, 448 insertions(+)
 create mode 100644 include/qemu/filemonitor.h
 create mode 100644 util/filemonitor.c
MAINTAINERS +6 -0
index 666e936812..1284bb3443 100644
@@ -1803,6 +1803,12 @@ F: include/qemu/sockets.h
 F: util/qemu-sockets.c
 F: qapi/sockets.json
 
+File monitor
+M: Daniel P. Berrange <[email protected]>
+S: Odd fixes
+F: util/filemonitor.c
+F: include/qemu/filemonitor.h
+
 Throttling infrastructure
 M: Alberto Garcia <[email protected]>
 S: Supported
include/qemu/filemonitor.h new file +117 -0

117 lines not on this page · raw message

util/Makefile.objs +1 -0
index e1c3fed4dc..769d295a27 100644
@@ -48,4 +48,5 @@ util-obj-y += range.o
 util-obj-y += stats64.o
 util-obj-y += systemd.o
 util-obj-y += iova-tree.o
+util-obj-y += filemonitor.o
 util-obj-$(CONFIG_LINUX) += vfio-helpers.o
util/filemonitor.c new file +315 -0

315 lines not on this page · raw message

util/trace-events +9 -0
index 4822434c89..1a429f5525 100644
@@ -21,6 +21,15 @@ buffer_move_empty(const char *buf, size_t len, const char *from) "%s: %zd bytes
 buffer_move(const char *buf, size_t len, const char *from) "%s: %zd bytes from %s"
 buffer_free(const char *buf, size_t len) "%s: capacity %zd"
 
+# util/filemonitor.c
+qemu_file_monitor_add_watch(void *mon, const char *dirpath, const char *filename, void *cb, void *opaque, int id) "File monitor %p add watch dir='%s' file='%s' cb=%p opaque=%p id=%u"
+qemu_file_monitor_remove_watch(void *mon, const char *dirpath, int id) "File monitor %p remove watch dir='%s' id=%u"
+qemu_file_monitor_new(void *mon, int fd) "File monitor %p created fd=%d"
+qemu_file_monitor_enable_watch(void *mon, const char *dirpath, int id) "File monitor %p enable watch dir='%s' id=%u"
+qemu_file_monitor_disable_watch(void *mon, const char *dirpath, int id) "Fle monitor %p disable watch dir='%s' id=%u"
+qemu_file_monitor_event(void *mon, const char *dirpath, const char *filename, int mask, unsigned int id) "File monitor %p event dir='%s' file='%s' mask=0x%x id=%u"
+qemu_file_monitor_dispatch(void *mon, const char *dirpath, const char *filename, int ev, void *cb, void *opaque, unsigned int id) "File monitor %p dispatch dir='%s' file='%s' ev=%d cb=%p opaque=%p id=%u"
+
 # util/qemu-coroutine.c
 qemu_aio_coroutine_enter(void *ctx, void *from, void *to, void *opaque) "ctx %p from %p to %p opaque %p"
 qemu_coroutine_yield(void *from, void *to) "from %p to %p"
Signature · 1 line
2.17.1
#2 lore raw

PATCH v4 2/11 qom: don't require user creatable objects to be registered

In reply to Daniel P. Berrangé

When an object is in turn owned by another user object, it is not desirable to expose this in the QOM object hierarchy, as it is just an internal implementation detail, we should be free to change without exposure.

---
 qom/object.c            | 12 ++++++++----
 qom/object_interfaces.c | 16 ++++++++++------
 2 files changed, 18 insertions(+), 10 deletions(-)
qom/object.c +8 -4
index 75d1d48944..fff85d6d62 100644
@@ -600,15 +600,19 @@ Object *object_new_with_propv(const char *typename,
         goto error;
     }
 
-    object_property_add_child(parent, id, obj, &local_err);
-    if (local_err) {
-        goto error;
+    if (id != NULL) {
+        object_property_add_child(parent, id, obj, &local_err);
+        if (local_err) {
+            goto error;
+        }
     }
 
     if (object_dynamic_cast(obj, TYPE_USER_CREATABLE)) {
         user_creatable_complete(obj, &local_err);
         if (local_err) {
-            object_unparent(obj);
+            if (id != NULL) {
+                object_unparent(obj);
+            }
             goto error;
         }
     }
qom/object_interfaces.c +10 -6
index 72b97a8bed..e0f12c0a9b 100644
@@ -83,16 +83,20 @@ Object *user_creatable_add_type(const char *type, const char *id,
         goto out;
     }
 
-    object_property_add_child(object_get_objects_root(),
-                              id, obj, &local_err);
-    if (local_err) {
-        goto out;
+    if (id != NULL) {
+        object_property_add_child(object_get_objects_root(),
+                                  id, obj, &local_err);
+        if (local_err) {
+            goto out;
+        }
     }
 
     user_creatable_complete(obj, &local_err);
     if (local_err) {
-        object_property_del(object_get_objects_root(),
-                            id, &error_abort);
+        if (id != NULL) {
+            object_property_del(object_get_objects_root(),
+                                id, &error_abort);
+        }
         goto out;
     }
 out:
Signature · 1 line
2.17.1
#3 lore raw

PATCH v4 3/11 hw/usb: don't set IN_ISDIR for inotify watch in MTP driver

In reply to Daniel P. Berrangé

IN_ISDIR is not a bit that one can request when registering a watch with inotify_add_watch. Rather it is a bit that is set automatically when reading events from the kernel.

---
 hw/usb/dev-mtp.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)
hw/usb/dev-mtp.c +1 -2
index 1ded7ac9a3..80f88e40fa 100644
@@ -638,8 +638,7 @@ static void usb_mtp_inotify_cleanup(MTPState *s)
 
 static int usb_mtp_add_watch(int inotifyfd, char *path)
 {
-    uint32_t mask = IN_CREATE | IN_DELETE | IN_MODIFY |
-        IN_ISDIR;
+    uint32_t mask = IN_CREATE | IN_DELETE | IN_MODIFY;
 
     return inotify_add_watch(inotifyfd, path, mask);
 }
Signature · 1 line
2.17.1
#4 lore raw

PATCH v4 4/11 hw/usb: fix const-ness for string params in MTP driver

In reply to Daniel P. Berrangé

Various functions accepting 'char *' string parameters were missing 'const' qualifiers.

---
 hw/usb/dev-mtp.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)
hw/usb/dev-mtp.c +4 -4
index 80f88e40fa..d5f570fb56 100644
@@ -368,7 +368,7 @@ static const USBDesc desc = {
 /* ----------------------------------------------------------------------- */
 
 static MTPObject *usb_mtp_object_alloc(MTPState *s, uint32_t handle,
-                                       MTPObject *parent, char *name)
+                                       MTPObject *parent, const char *name)
 {
     MTPObject *o = g_new0(MTPObject, 1);
 
@@ -450,7 +450,7 @@ static MTPObject *usb_mtp_object_lookup(MTPState *s, uint32_t handle)
 }
 
 static MTPObject *usb_mtp_add_child(MTPState *s, MTPObject *o,
-                                    char *name)
+                                    const char *name)
 {
     MTPObject *child =
         usb_mtp_object_alloc(s, s->next_handle++, o, name);
@@ -469,7 +469,7 @@ static MTPObject *usb_mtp_add_child(MTPState *s, MTPObject *o,
 }
 
 static MTPObject *usb_mtp_object_lookup_name(MTPObject *parent,
-                                             char *name, int len)
+                                             const char *name, int len)
 {
     MTPObject *iter;
 
@@ -636,7 +636,7 @@ static void usb_mtp_inotify_cleanup(MTPState *s)
     }
 }
 
-static int usb_mtp_add_watch(int inotifyfd, char *path)
+static int usb_mtp_add_watch(int inotifyfd, const char *path)
 {
     uint32_t mask = IN_CREATE | IN_DELETE | IN_MODIFY;
 
Signature · 1 line
2.17.1
#5 lore raw

PATCH v4 5/11 hw/usb: switch MTP to use new inotify APIs

In reply to Daniel P. Berrangé

The internal inotify APIs allow alot of conditional statements to be cleared out, and provide a simpler callback for handling events.

---
 hw/usb/dev-mtp.c    | 250 ++++++++++++++++----------------------------
 hw/usb/trace-events |   2 +-
 2 files changed, 93 insertions(+), 159 deletions(-)
hw/usb/dev-mtp.c +92 -158
index d5f570fb56..68309ce66d 100644
@@ -15,13 +15,11 @@
 #include <dirent.h>
 
 #include <sys/statvfs.h>
-#ifdef CONFIG_INOTIFY1
-#include <sys/inotify.h>
-#include "qemu/main-loop.h"
-#endif
+
 
 #include "qemu-common.h"
 #include "qemu/iov.h"
+#include "qemu/filemonitor.h"
 #include "trace.h"
 #include "hw/usb.h"
 #include "desc.h"
@@ -123,7 +121,6 @@ enum {
     EP_EVENT,
 };
 
-#ifdef CONFIG_INOTIFY1
 typedef struct MTPMonEntry MTPMonEntry;
 
 struct MTPMonEntry {
@@ -132,7 +129,6 @@ struct MTPMonEntry {
 
     QTAILQ_ENTRY(MTPMonEntry) next;
 };
-#endif
 
 struct MTPControl {
     uint16_t     code;
@@ -158,10 +154,8 @@ struct MTPObject {
     char         *name;
     char         *path;
     struct stat  stat;
-#ifdef CONFIG_INOTIFY1
-    /* inotify watch cookie */
+    /* file monitor watch cookie */
     int          watchfd;
-#endif
     MTPObject    *parent;
     uint32_t     nchildren;
     QLIST_HEAD(, MTPObject) children;
@@ -184,11 +178,8 @@ struct MTPState {
     bool         readonly;
 
     QTAILQ_HEAD(, MTPObject) objects;
-#ifdef CONFIG_INOTIFY1
-    /* inotify descriptor */
-    int          inotifyfd;
+    QFileMonitor *file_monitor;
     QTAILQ_HEAD(events, MTPMonEntry) events;
-#endif
     /* Responder is expecting a write operation */
     bool write_pending;
     struct {
@@ -473,6 +464,10 @@ static MTPObject *usb_mtp_object_lookup_name(MTPObject *parent,
 {
     MTPObject *iter;
 
+    if (len == -1) {
+        len = strlen(name);
+    }
+
     QLIST_FOREACH(iter, &parent->children, list) {
         if (strncmp(iter->name, name, len) == 0) {
             return iter;
@@ -482,7 +477,6 @@ static MTPObject *usb_mtp_object_lookup_name(MTPObject *parent,
     return NULL;
 }
 
-#ifdef CONFIG_INOTIFY1
 static MTPObject *usb_mtp_object_lookup_wd(MTPState *s, int wd)
 {
     MTPObject *iter;
@@ -496,158 +490,98 @@ static MTPObject *usb_mtp_object_lookup_wd(MTPState *s, int wd)
     return NULL;
 }
 
-static void inotify_watchfn(void *arg)
+static void file_monitor_event(int wd,
+                               QFileMonitorEvent ev,
+                               const char *name,
+                               void *opaque)
 {
-    MTPState *s = arg;
-    ssize_t bytes;
-    /* From the man page: atleast one event can be read */
-    int pos;
-    char buf[sizeof(struct inotify_event) + NAME_MAX + 1];
-
-    for (;;) {
-        bytes = read(s->inotifyfd, buf, sizeof(buf));
-        pos = 0;
-
-        if (bytes <= 0) {
-            /* Better luck next time */
+    MTPState *s = opaque;
+    int watchfd = 0;
+    MTPObject *parent = usb_mtp_object_lookup_wd(s, wd);
+    MTPMonEntry *entry = NULL;
+    MTPObject *o;
+
+    if (!parent) {
+        return;
+    }
+
+    switch (ev) {
+    case QFILE_MONITOR_EVENT_CREATED:
+        if (usb_mtp_object_lookup_name(parent, name, -1)) {
+            /* Duplicate create event */
             return;
         }
+        entry = g_new0(MTPMonEntry, 1);
+        entry->handle = s->next_handle;
+        entry->event = EVT_OBJ_ADDED;
+        o = usb_mtp_add_child(s, parent, name);
+        if (!o) {
+            g_free(entry);
+            return;
+        }
+        o->watchfd = watchfd;
+        trace_usb_mtp_file_monitor_event(s->dev.addr, name, "Obj Added");
+        break;
 
+    case QFILE_MONITOR_EVENT_DELETED:
         /*
-         * TODO: Ignore initiator initiated events.
-         * For now we are good because the store is RO
+         * The kernel issues a IN_IGNORED event
+         * when a dir containing a watchpoint is
+         * deleted, so we don't have to delete the
+         * watchpoint
          */
-        while (bytes > 0) {
-            char *p = buf + pos;
-            struct inotify_event *event = (struct inotify_event *)p;
-            int watchfd = 0;
-            uint32_t mask = event->mask & (IN_CREATE | IN_DELETE |
-                                           IN_MODIFY | IN_IGNORED);
-            MTPObject *parent = usb_mtp_object_lookup_wd(s, event->wd);
-            MTPMonEntry *entry = NULL;
-            MTPObject *o;
-
-            pos = pos + sizeof(struct inotify_event) + event->len;
-            bytes = bytes - pos;
-
-            if (!parent) {
-                continue;
-            }
-
-            switch (mask) {
-            case IN_CREATE:
-                if (usb_mtp_object_lookup_name
-                    (parent, event->name, event->len)) {
-                    /* Duplicate create event */
-                    continue;
-                }
-                entry = g_new0(MTPMonEntry, 1);
-                entry->handle = s->next_handle;
-                entry->event = EVT_OBJ_ADDED;
-                o = usb_mtp_add_child(s, parent, event->name);
-                if (!o) {
-                    g_free(entry);
-                    continue;
-                }
-                o->watchfd = watchfd;
-                trace_usb_mtp_inotify_event(s->dev.addr, event->name,
-                                            event->mask, "Obj Added");
-                break;
-
-            case IN_DELETE:
-                /*
-                 * The kernel issues a IN_IGNORED event
-                 * when a dir containing a watchpoint is
-                 * deleted, so we don't have to delete the
-                 * watchpoint
-                 */
-                o = usb_mtp_object_lookup_name(parent, event->name, event->len);
-                if (!o) {
-                    continue;
-                }
-                entry = g_new0(MTPMonEntry, 1);
-                entry->handle = o->handle;
-                entry->event = EVT_OBJ_REMOVED;
-                trace_usb_mtp_inotify_event(s->dev.addr, o->path,
-                                      event->mask, "Obj Deleted");
-                usb_mtp_object_free(s, o);
-                break;
-
-            case IN_MODIFY:
-                o = usb_mtp_object_lookup_name(parent, event->name, event->len);
-                if (!o) {
-                    continue;
-                }
-                entry = g_new0(MTPMonEntry, 1);
-                entry->handle = o->handle;
-                entry->event = EVT_OBJ_INFO_CHANGED;
-                trace_usb_mtp_inotify_event(s->dev.addr, o->path,
-                                      event->mask, "Obj Modified");
-                break;
-
-            case IN_IGNORED:
-                trace_usb_mtp_inotify_event(s->dev.addr, parent->path,
-                                      event->mask, "Obj parent dir ignored");
-                break;
-
-            default:
-                fprintf(stderr, "usb-mtp: failed to parse inotify event\n");
-                continue;
-            }
+        o = usb_mtp_object_lookup_name(parent, name, -1);
+        if (!o) {
+            return;
+        }
+        entry = g_new0(MTPMonEntry, 1);
+        entry->handle = o->handle;
+        entry->event = EVT_OBJ_REMOVED;
+        trace_usb_mtp_file_monitor_event(s->dev.addr, o->path, "Obj Deleted");
+        usb_mtp_object_free(s, o);
+        break;
 
-            if (entry) {
-                QTAILQ_INSERT_HEAD(&s->events, entry, next);
-            }
+    case QFILE_MONITOR_EVENT_MODIFIED:
+        o = usb_mtp_object_lookup_name(parent, name, -1);
+        if (!o) {
+            return;
         }
-    }
-}
+        entry = g_new0(MTPMonEntry, 1);
+        entry->handle = o->handle;
+        entry->event = EVT_OBJ_INFO_CHANGED;
+        trace_usb_mtp_file_monitor_event(s->dev.addr, o->path, "Obj Modified");
+        break;
 
-static int usb_mtp_inotify_init(MTPState *s)
-{
-    int fd;
+    case QFILE_MONITOR_EVENT_IGNORED:
+        trace_usb_mtp_file_monitor_event(s->dev.addr, parent->path,
+                                    "Obj parent dir ignored");
+        break;
 
-    fd = inotify_init1(IN_NONBLOCK);
-    if (fd == -1) {
-        return 1;
+    default:
+        g_assert_not_reached();
     }
 
-    QTAILQ_INIT(&s->events);
-    s->inotifyfd = fd;
-
-    qemu_set_fd_handler(fd, inotify_watchfn, NULL, s);
-
-    return 0;
+    if (entry) {
+        QTAILQ_INSERT_HEAD(&s->events, entry, next);
+    }
 }
 
-static void usb_mtp_inotify_cleanup(MTPState *s)
+static void usb_mtp_file_monitor_cleanup(MTPState *s)
 {
     MTPMonEntry *e, *p;
 
-    if (!s->inotifyfd) {
-        return;
-    }
-
-    qemu_set_fd_handler(s->inotifyfd, NULL, NULL, s);
-    close(s->inotifyfd);
-
     QTAILQ_FOREACH_SAFE(e, &s->events, next, p) {
         QTAILQ_REMOVE(&s->events, e, next);
         g_free(e);
     }
 }
 
-static int usb_mtp_add_watch(int inotifyfd, const char *path)
-{
-    uint32_t mask = IN_CREATE | IN_DELETE | IN_MODIFY;
-
-    return inotify_add_watch(inotifyfd, path, mask);
-}
-#endif
 
 static void usb_mtp_object_readdir(MTPState *s, MTPObject *o)
 {
     struct dirent *entry;
     DIR *dir;
+    Error *err = NULL;
 
     if (o->have_children) {
         return;
@@ -658,16 +592,19 @@ static void usb_mtp_object_readdir(MTPState *s, MTPObject *o)
     if (!dir) {
         return;
     }
-#ifdef CONFIG_INOTIFY1
-    int watchfd = usb_mtp_add_watch(s->inotifyfd, o->path);
+
+    int watchfd = qemu_file_monitor_add_watch(s->file_monitor, o->path, NULL,
+                                              file_monitor_event, s, &err);
     if (watchfd == -1) {
-        fprintf(stderr, "usb-mtp: failed to add watch for %s\n", o->path);
+        fprintf(stderr, "usb-mtp: failed to add watch for %s: %s\n", o->path,
+                error_get_pretty(err));
+        error_free(err);
     } else {
-        trace_usb_mtp_inotify_event(s->dev.addr, o->path,
-                                    0, "Watch Added");
+        trace_usb_mtp_file_monitor_event(s->dev.addr, o->path,
+                                         "Watch Added");
         o->watchfd = watchfd;
     }
-#endif
+
     while ((entry = readdir(dir)) != NULL) {
         usb_mtp_add_child(s, o, entry->d_name);
     }
@@ -1175,13 +1112,11 @@ enum {
 /* Assumes that children, if any, have been already freed */
 static void usb_mtp_object_free_one(MTPState *s, MTPObject *o)
 {
-#ifndef CONFIG_INOTIFY1
     assert(o->nchildren == 0);
     QTAILQ_REMOVE(&s->objects, o, next);
     g_free(o->name);
     g_free(o->path);
     g_free(o);
-#endif
 }
 
 static int usb_mtp_deletefn(MTPState *s, MTPObject *o, uint32_t trans)
@@ -1280,6 +1215,7 @@ static void usb_mtp_command(MTPState *s, MTPControl *c)
     MTPData *data_in = NULL;
     MTPObject *o = NULL;
     uint32_t nres = 0, res0 = 0;
+    Error *err = NULL;
 
     /* sanity checks */
     if (c->code >= CMD_CLOSE_SESSION && s->session == 0) {
@@ -1307,19 +1243,21 @@ static void usb_mtp_command(MTPState *s, MTPControl *c)
         trace_usb_mtp_op_open_session(s->dev.addr);
         s->session = c->argv[0];
         usb_mtp_object_alloc(s, s->next_handle++, NULL, s->root);
-#ifdef CONFIG_INOTIFY1
-        if (usb_mtp_inotify_init(s)) {
-            fprintf(stderr, "usb-mtp: file monitoring init failed\n");
+
+        s->file_monitor = qemu_file_monitor_get_instance(&err);
+        if (err) {
+            fprintf(stderr, "usb-mtp: file monitoring init failed: %s\n",
+                    error_get_pretty(err));
+            error_free(err);
+        } else {
+            QTAILQ_INIT(&s->events);
         }
-#endif
         break;
     case CMD_CLOSE_SESSION:
         trace_usb_mtp_op_close_session(s->dev.addr);
         s->session = 0;
         s->next_handle = 0;
-#ifdef CONFIG_INOTIFY1
-        usb_mtp_inotify_cleanup(s);
-#endif
+        usb_mtp_file_monitor_cleanup(s);
         usb_mtp_object_free(s, QTAILQ_FIRST(&s->objects));
         assert(QTAILQ_EMPTY(&s->objects));
         break;
@@ -1532,9 +1470,7 @@ static void usb_mtp_handle_reset(USBDevice *dev)
 
     trace_usb_mtp_reset(s->dev.addr);
 
-#ifdef CONFIG_INOTIFY1
-    usb_mtp_inotify_cleanup(s);
-#endif
+    usb_mtp_file_monitor_cleanup(s);
     usb_mtp_object_free(s, QTAILQ_FIRST(&s->objects));
     s->session = 0;
     usb_mtp_data_free(s->data_in);
@@ -1899,7 +1835,6 @@ static void usb_mtp_handle_data(USBDevice *dev, USBPacket *p)
         }
         break;
     case EP_EVENT:
-#ifdef CONFIG_INOTIFY1
         if (!QTAILQ_EMPTY(&s->events)) {
             struct MTPMonEntry *e = QTAILQ_LAST(&s->events, events);
             uint32_t handle;
@@ -1923,7 +1858,6 @@ static void usb_mtp_handle_data(USBDevice *dev, USBPacket *p)
             g_free(e);
             return;
         }
-#endif
         p->status = USB_RET_NAK;
         return;
     default:
hw/usb/trace-events +1 -1
index 2c18770ca5..99b1e8b8ce 100644
@@ -237,7 +237,7 @@ usb_mtp_op_unknown(int dev, uint32_t code) "dev %d, command code 0x%x"
 usb_mtp_object_alloc(int dev, uint32_t handle, const char *path) "dev %d, handle 0x%x, path %s"
 usb_mtp_object_free(int dev, uint32_t handle, const char *path) "dev %d, handle 0x%x, path %s"
 usb_mtp_add_child(int dev, uint32_t handle, const char *path) "dev %d, handle 0x%x, path %s"
-usb_mtp_inotify_event(int dev, const char *path, uint32_t mask, const char *s) "dev %d, path %s mask 0x%x event %s"
+usb_mtp_file_monitor_event(int dev, const char *path, const char *s) "dev %d, path %s event %s"
 
 # hw/usb/host-libusb.c
 usb_host_open_started(int bus, int addr) "dev %d:%d"
Signature · 1 line
2.17.1
#6 lore raw

PATCH v4 6/11 authz: add QAuthZ object as an authorization base class

In reply to Daniel P. Berrangé

From: "Daniel P. Berrange" <[email protected]>

The current qemu_acl module provides a simple access control list facility inside QEMU, which is used via a set of monitor commands acl_show, acl_policy, acl_add, acl_remove & acl_reset.

Note there is no ability to create ACLs - the network services (eg VNC server) were expected to create ACLs that they want to check.

There is also no way to define ACLs on the command line, nor potentially integrate with external authorization systems like polkit, pam, ldap lookup, etc.

The QAuthZ object defines a minimal abstract QOM class that can be subclassed for creating different authorization providers.

---
 MAINTAINERS          |   7 +++
 Makefile             |  10 ++--
 Makefile.objs        |   6 +++
 Makefile.target      |   2 +
 authz/Makefile.objs  |   1 +
 authz/base.c         |  82 +++++++++++++++++++++++++++++++
 authz/trace-events   |   4 ++
 include/authz/base.h | 112 +++++++++++++++++++++++++++++++++++++++++++
 8 files changed, 220 insertions(+), 4 deletions(-)
 create mode 100644 authz/Makefile.objs
 create mode 100644 authz/base.c
 create mode 100644 authz/trace-events
 create mode 100644 include/authz/base.h
MAINTAINERS +7 -0
index 1284bb3443..999541b7c6 100644
@@ -1794,6 +1794,13 @@ F: io/
 F: include/io/
 F: tests/test-io-*
 
+User authorization
+M: Daniel P. Berrange <[email protected]>
+S: Maintained
+F: authz/
+F: include/authz/
+F: tests/test-authz-*
+
 Sockets
 M: Daniel P. Berrange <[email protected]>
 M: Gerd Hoffmann <[email protected]>
Makefile +6 -4
index 2da686be33..7c414d9918 100644
@@ -411,6 +411,7 @@ endif
 
 dummy := $(call unnest-vars,, \
                 stub-obj-y \
+                authz-obj-y \
                 chardev-obj-y \
                 util-obj-y \
                 qga-obj-y \
@@ -472,6 +473,7 @@ qemu-options.def: $(SRC_PATH)/qemu-options.hx $(SRC_PATH)/scripts/hxtool
 SUBDIR_RULES=$(patsubst %,subdir-%, $(TARGET_DIRS))
 SOFTMMU_SUBDIR_RULES=$(filter %-softmmu,$(SUBDIR_RULES))
 
+$(SOFTMMU_SUBDIR_RULES): $(authz-obj-y)
 $(SOFTMMU_SUBDIR_RULES): $(block-obj-y)
 $(SOFTMMU_SUBDIR_RULES): $(crypto-obj-y)
 $(SOFTMMU_SUBDIR_RULES): $(io-obj-y)
@@ -534,9 +536,9 @@ COMMON_LDADDS = libqemuutil.a
 
 qemu-img.o: qemu-img-cmds.h
 
-qemu-img$(EXESUF): qemu-img.o $(block-obj-y) $(crypto-obj-y) $(io-obj-y) $(qom-obj-y) $(COMMON_LDADDS)
-qemu-nbd$(EXESUF): qemu-nbd.o $(block-obj-y) $(crypto-obj-y) $(io-obj-y) $(qom-obj-y) $(COMMON_LDADDS)
-qemu-io$(EXESUF): qemu-io.o $(block-obj-y) $(crypto-obj-y) $(io-obj-y) $(qom-obj-y) $(COMMON_LDADDS)
+qemu-img$(EXESUF): qemu-img.o $(authz-obj-y) $(block-obj-y) $(crypto-obj-y) $(io-obj-y) $(qom-obj-y) $(COMMON_LDADDS)
+qemu-nbd$(EXESUF): qemu-nbd.o $(authz-obj-y) $(block-obj-y) $(crypto-obj-y) $(io-obj-y) $(qom-obj-y) $(COMMON_LDADDS)
+qemu-io$(EXESUF): qemu-io.o $(authz-obj-y) $(block-obj-y) $(crypto-obj-y) $(io-obj-y) $(qom-obj-y) $(COMMON_LDADDS)
 
 qemu-bridge-helper$(EXESUF): qemu-bridge-helper.o $(COMMON_LDADDS)
 
@@ -545,7 +547,7 @@ qemu-keymap$(EXESUF): qemu-keymap.o ui/input-keymap.o $(COMMON_LDADDS)
 fsdev/virtfs-proxy-helper$(EXESUF): fsdev/virtfs-proxy-helper.o fsdev/9p-marshal.o fsdev/9p-iov-marshal.o $(COMMON_LDADDS)
 fsdev/virtfs-proxy-helper$(EXESUF): LIBS += -lcap
 
-scsi/qemu-pr-helper$(EXESUF): scsi/qemu-pr-helper.o scsi/utils.o $(crypto-obj-y) $(io-obj-y) $(qom-obj-y) $(COMMON_LDADDS)
+scsi/qemu-pr-helper$(EXESUF): scsi/qemu-pr-helper.o scsi/utils.o $(authz-obj-y) $(crypto-obj-y) $(io-obj-y) $(qom-obj-y) $(COMMON_LDADDS)
 ifdef CONFIG_MPATH
 scsi/qemu-pr-helper$(EXESUF): LIBS += -ludev -lmultipath -lmpathpersist
 endif
Makefile.objs +6 -0
index 7a9828da28..42cdb1c1c3 100644
@@ -62,6 +62,11 @@ util-obj-y += qapi/qapi-introspect.o
 
 chardev-obj-y = chardev/
 
+#######################################################################
+# authz-obj-y is code used by both qemu system emulation and qemu-img
+
+authz-obj-y = authz/
+
 #######################################################################
 # block-obj-y is code used by both qemu system emulation and qemu-img
 
@@ -199,6 +204,7 @@ trace-events-subdirs =
 trace-events-subdirs += accel/kvm
 trace-events-subdirs += accel/tcg
 trace-events-subdirs += audio
+trace-events-subdirs += authz
 trace-events-subdirs += block
 trace-events-subdirs += chardev
 trace-events-subdirs += crypto
Makefile.target +2 -0
index 4d56298bbf..c08461726d 100644
@@ -172,6 +172,7 @@ include $(SRC_PATH)/Makefile.objs
 dummy := $(call unnest-vars,,target-obj-y)
 target-obj-y-save := $(target-obj-y)
 dummy := $(call unnest-vars,.., \
+               authz-obj-y \
                block-obj-y \
                block-obj-m \
                chardev-obj-y \
@@ -185,6 +186,7 @@ target-obj-y := $(target-obj-y-save)
 all-obj-y += $(common-obj-y)
 all-obj-y += $(target-obj-y)
 all-obj-y += $(qom-obj-y)
+all-obj-$(CONFIG_SOFTMMU) += $(authz-obj-y)
 all-obj-$(CONFIG_SOFTMMU) += $(block-obj-y) $(chardev-obj-y)
 all-obj-$(CONFIG_USER_ONLY) += $(crypto-aes-obj-y)
 all-obj-$(CONFIG_SOFTMMU) += $(crypto-obj-y)
authz/Makefile.objs new file +1 -0
new file mode 100644
index 0000000000..12597c9528
@@ -0,0 +1 @@
+authz-obj-y += base.o
authz/base.c new file +82 -0

82 lines not on this page · raw message

authz/trace-events new file +4 -0
new file mode 100644
index 0000000000..481c90f511
@@ -0,0 +1,4 @@
+# See docs/devel/tracing.txt for syntax documentation.
+
+# authz/base.c
+qauthz_is_allowed(void *authz, const char *identity, bool allowed) "AuthZ %p check identity=%s allowed=%d"
include/authz/base.h new file +112 -0

112 lines not on this page · raw message

Signature · 1 line
2.17.1
#7 lore raw

PATCH v4 7/11 authz: add QAuthZSimple object type for easy whitelist auth checks

In reply to Daniel P. Berrangé

In many cases a single VM will just need to whilelist a single identity as the allowed user of network services. This is especially the case for TLS live migration (optionally with NBD storage) where we just need to whitelist the x509 certificate distinguished name of the source QEMU host.

Via QMP this can be configured with:

  {
    "execute": "object-add",
    "arguments": {
      "qom-type": "authz-simple",
      "id": "authz0",
      "parameters": {
        "identity": "fred"
      }
    }
  }

Or via the command line

-object authz-simple,id=authz0,identity=fred

---
 authz/Makefile.objs    |   1 +
 authz/simple.c         | 122 +++++++++++++++++++++++++++++++++++++++++
 authz/trace-events     |   3 +
 include/authz/simple.h |  84 ++++++++++++++++++++++++++++
 qemu-options.hx        |  21 +++++++
 5 files changed, 231 insertions(+)
 create mode 100644 authz/simple.c
 create mode 100644 include/authz/simple.h
authz/Makefile.objs +1 -0
index 12597c9528..2a75d53840 100644
@@ -1 +1,2 @@
 authz-obj-y += base.o
+authz-obj-y += simple.o
authz/simple.c new file +122 -0

122 lines not on this page · raw message

authz/trace-events +3 -0
index 481c90f511..1ef796c1e1 100644
@@ -2,3 +2,6 @@
 
 # authz/base.c
 qauthz_is_allowed(void *authz, const char *identity, bool allowed) "AuthZ %p check identity=%s allowed=%d"
+
+# auth/simple.c
+qauthz_simple_is_allowed(void *authz, const char *wantidentity, const char *gotidentity) "AuthZ simple %p check want identity=%s got identity=%s"
include/authz/simple.h new file +84 -0

84 lines not on this page · raw message

qemu-options.hx +21 -0
index ea4edb4938..6713ebbc0a 100644
@@ -4441,6 +4441,27 @@ e.g to launch a SEV guest
      .....
 
 @end example
+
+
+@item -object authz-simple,id=@var{id},identity=@var{string}
+
+Create an authorization object that will control access to network services.
+
+The @option{identity} parameter is identifies the user and its format
+depends on the network service that authorization object is associated
+with. For authorizing based on TLS x509 certificates, the identity must
+be the x509 distinguished name. Note that care must be taken to escape
+any commas in the distinguished name.
+
+An example authorization object to validate a x509 distinguished name
+would look like:
+@example
+ # $QEMU \
+     ...
+     -object authz-simple,id=auth0,identity=CN=laptop.example.com,,O=Example Org,,L=London,,ST=London,,C=GB \
+     ...
+@end example
+
 @end table
 
 ETEXI
Signature · 1 line
2.17.1
#8 lore raw

PATCH v4 8/11 authz: add QAuthZList object type for an access control list

In reply to Daniel P. Berrangé

From: "Daniel P. Berrange" <[email protected]>

Add a QAuthZList object type that implements the QAuthZ interface. This built-in implementation maintains a trivial access control list with a sequence of match rules and a final default policy. This replicates the functionality currently provided by the qemu_acl module.

To create an instance of this object via the QMP monitor, the syntax used would be:

  {
    "execute": "object-add",
    "arguments": {
      "qom-type": "authz-list",
      "id": "authz0",
      "parameters": {
        "rules": [
           { "match": "fred", "policy": "allow", "format": "exact" },
           { "match": "bob", "policy": "allow", "format": "exact" },
           { "match": "danb", "policy": "deny", "format": "glob" },
           { "match": "dan*", "policy": "allow", "format": "exact" },
        ],
        "policy": "deny"
      }
    }
  }

This sets up an authorization rule that allows 'fred', 'bob' and anyone whose name starts with 'dan', except for 'danb'. Everyone unmatched is denied.

It is not currently possible to create this via -object, since there is no syntax supported to specify non-scalar properties for objects. This is likely to be addressed by later support for using JSON with -object, or an equivalent approach.

In any case the future "authz-listfile" object can be used from the CLI and is likely a better choice, as it allows the ACL to be refreshed automatically on change.

---
 .gitignore              |   4 +
 MAINTAINERS             |   1 +
 Makefile                |   7 +-
 Makefile.objs           |   4 +
 authz/Makefile.objs     |   1 +
 authz/list.c            | 315 ++++++++++++++++++++++++++++++++++++++++
 authz/trace-events      |   4 +
 include/authz/list.h    | 106 ++++++++++++++
 qapi/authz.json         |  58 ++++++++
 qapi/qapi-schema.json   |   1 +
 tests/Makefile.include  |   4 +
 tests/test-authz-list.c | 171 ++++++++++++++++++++++
 12 files changed, 675 insertions(+), 1 deletion(-)
 create mode 100644 authz/list.c
 create mode 100644 include/authz/list.h
 create mode 100644 qapi/authz.json
 create mode 100644 tests/test-authz-list.c
.gitignore +4 -0
index 5668d02782..5aab952505 100644
@@ -47,6 +47,7 @@
 /qapi/qapi-commands-trace.[ch]
 /qapi/qapi-commands-transaction.[ch]
 /qapi/qapi-commands-ui.[ch]
+/qapi/qapi-commands-authz.[ch]
 /qapi/qapi-commands.[ch]
 /qapi/qapi-events-block-core.[ch]
 /qapi/qapi-events-block.[ch]
@@ -65,6 +66,7 @@
 /qapi/qapi-events-trace.[ch]
 /qapi/qapi-events-transaction.[ch]
 /qapi/qapi-events-ui.[ch]
+/qapi/qapi-events-authz.[ch]
 /qapi/qapi-events.[ch]
 /qapi/qapi-introspect.[ch]
 /qapi/qapi-types-block-core.[ch]
@@ -84,6 +86,7 @@
 /qapi/qapi-types-trace.[ch]
 /qapi/qapi-types-transaction.[ch]
 /qapi/qapi-types-ui.[ch]
+/qapi/qapi-types-authz.[ch]
 /qapi/qapi-types.[ch]
 /qapi/qapi-visit-block-core.[ch]
 /qapi/qapi-visit-block.[ch]
@@ -102,6 +105,7 @@
 /qapi/qapi-visit-trace.[ch]
 /qapi/qapi-visit-transaction.[ch]
 /qapi/qapi-visit-ui.[ch]
+/qapi/qapi-visit-authz.[ch]
 /qapi/qapi-visit.[ch]
 /qapi/qapi-doc.texi
 /qemu-doc.html
MAINTAINERS +1 -0
index 999541b7c6..77a11213c9 100644
@@ -1798,6 +1798,7 @@ User authorization
 M: Daniel P. Berrange <[email protected]>
 S: Maintained
 F: authz/
+F: qapi/authz.json
 F: include/authz/
 F: tests/test-authz-*
 
Makefile +6 -1
index 7c414d9918..1fc74ff15b 100644
@@ -596,7 +596,8 @@ qapi-modules = $(SRC_PATH)/qapi/qapi-schema.json $(SRC_PATH)/qapi/common.json \
                $(SRC_PATH)/qapi/tpm.json \
                $(SRC_PATH)/qapi/trace.json \
                $(SRC_PATH)/qapi/transaction.json \
-               $(SRC_PATH)/qapi/ui.json
+               $(SRC_PATH)/qapi/ui.json \
+               $(SRC_PATH)/qapi/authz.json
 
 qapi/qapi-builtin-types.c qapi/qapi-builtin-types.h \
 qapi/qapi-types.c qapi/qapi-types.h \
@@ -617,6 +618,7 @@ qapi/qapi-types-tpm.c qapi/qapi-types-tpm.h \
 qapi/qapi-types-trace.c qapi/qapi-types-trace.h \
 qapi/qapi-types-transaction.c qapi/qapi-types-transaction.h \
 qapi/qapi-types-ui.c qapi/qapi-types-ui.h \
+qapi/qapi-types-authz.c qapi/qapi-types-authz.h \
 qapi/qapi-builtin-visit.c qapi/qapi-builtin-visit.h \
 qapi/qapi-visit.c qapi/qapi-visit.h \
 qapi/qapi-visit-block-core.c qapi/qapi-visit-block-core.h \
@@ -636,6 +638,7 @@ qapi/qapi-visit-tpm.c qapi/qapi-visit-tpm.h \
 qapi/qapi-visit-trace.c qapi/qapi-visit-trace.h \
 qapi/qapi-visit-transaction.c qapi/qapi-visit-transaction.h \
 qapi/qapi-visit-ui.c qapi/qapi-visit-ui.h \
+qapi/qapi-visit-authz.c qapi/qapi-visit-authz.h \
 qapi/qapi-commands.h qapi/qapi-commands.c \
 qapi/qapi-commands-block-core.c qapi/qapi-commands-block-core.h \
 qapi/qapi-commands-block.c qapi/qapi-commands-block.h \
@@ -654,6 +657,7 @@ qapi/qapi-commands-tpm.c qapi/qapi-commands-tpm.h \
 qapi/qapi-commands-trace.c qapi/qapi-commands-trace.h \
 qapi/qapi-commands-transaction.c qapi/qapi-commands-transaction.h \
 qapi/qapi-commands-ui.c qapi/qapi-commands-ui.h \
+qapi/qapi-commands-authz.c qapi/qapi-commands-authz.h \
 qapi/qapi-events.c qapi/qapi-events.h \
 qapi/qapi-events-block-core.c qapi/qapi-events-block-core.h \
 qapi/qapi-events-block.c qapi/qapi-events-block.h \
@@ -672,6 +676,7 @@ qapi/qapi-events-tpm.c qapi/qapi-events-tpm.h \
 qapi/qapi-events-trace.c qapi/qapi-events-trace.h \
 qapi/qapi-events-transaction.c qapi/qapi-events-transaction.h \
 qapi/qapi-events-ui.c qapi/qapi-events-ui.h \
+qapi/qapi-events-authz.c qapi/qapi-events-authz.h \
 qapi/qapi-introspect.h qapi/qapi-introspect.c \
 qapi/qapi-doc.texi: \
 qapi-gen-timestamp ;
Makefile.objs +4 -0
index 42cdb1c1c3..60c0af70cc 100644
@@ -21,6 +21,7 @@ util-obj-y += qapi/qapi-types-tpm.o
 util-obj-y += qapi/qapi-types-trace.o
 util-obj-y += qapi/qapi-types-transaction.o
 util-obj-y += qapi/qapi-types-ui.o
+util-obj-y += qapi/qapi-types-authz.o
 util-obj-y += qapi/qapi-builtin-visit.o
 util-obj-y += qapi/qapi-visit.o
 util-obj-y += qapi/qapi-visit-block-core.o
@@ -40,6 +41,7 @@ util-obj-y += qapi/qapi-visit-tpm.o
 util-obj-y += qapi/qapi-visit-trace.o
 util-obj-y += qapi/qapi-visit-transaction.o
 util-obj-y += qapi/qapi-visit-ui.o
+util-obj-y += qapi/qapi-visit-authz.o
 util-obj-y += qapi/qapi-events.o
 util-obj-y += qapi/qapi-events-block-core.o
 util-obj-y += qapi/qapi-events-block.o
@@ -58,6 +60,7 @@ util-obj-y += qapi/qapi-events-tpm.o
 util-obj-y += qapi/qapi-events-trace.o
 util-obj-y += qapi/qapi-events-transaction.o
 util-obj-y += qapi/qapi-events-ui.o
+util-obj-y += qapi/qapi-events-authz.o
 util-obj-y += qapi/qapi-introspect.o
 
 chardev-obj-y = chardev/
@@ -160,6 +163,7 @@ common-obj-y += qapi/qapi-commands-tpm.o
 common-obj-y += qapi/qapi-commands-trace.o
 common-obj-y += qapi/qapi-commands-transaction.o
 common-obj-y += qapi/qapi-commands-ui.o
+common-obj-y += qapi/qapi-commands-authz.o
 common-obj-y += qapi/qapi-introspect.o
 common-obj-y += qmp.o hmp.o
 endif
authz/Makefile.objs +1 -0
index 2a75d53840..921fa624d7 100644
@@ -1,2 +1,3 @@
 authz-obj-y += base.o
 authz-obj-y += simple.o
+authz-obj-y += list.o
authz/list.c new file +315 -0

315 lines not on this page · raw message

authz/trace-events +4 -0
index 1ef796c1e1..a896d876e8 100644
@@ -5,3 +5,7 @@ qauthz_is_allowed(void *authz, const char *identity, bool allowed) "AuthZ %p che
 
 # auth/simple.c
 qauthz_simple_is_allowed(void *authz, const char *wantidentity, const char *gotidentity) "AuthZ simple %p check want identity=%s got identity=%s"
+
+# auth/list.c
+qauthz_list_check_rule(void *authz, const char *identity, const char *rule, int format, int policy) "AuthZ list %p check rule=%s identity=%s format=%d policy=%d"
+qauthz_list_default_policy(void *authz, const char *identity, int policy) "AuthZ list %p default identity=%s policy=%d"
include/authz/list.h new file +106 -0

106 lines not on this page · raw message

qapi/authz.json new file +58 -0

58 lines not on this page · raw message

qapi/qapi-schema.json +1 -0
index 65b6dc2f6f..6a5a02a388 100644
@@ -89,6 +89,7 @@
 { 'include': 'rocker.json' }
 { 'include': 'tpm.json' }
 { 'include': 'ui.json' }
+{ 'include': 'authz.json' }
 { 'include': 'migration.json' }
 { 'include': 'transaction.json' }
 { 'include': 'trace.json' }
tests/Makefile.include +4 -0
index a49282704e..50157934c1 100644
@@ -171,6 +171,7 @@ check-unit-y += tests/ptimer-test$(EXESUF)
 gcov-files-ptimer-test-y = hw/core/ptimer.c
 check-unit-y += tests/test-qapi-util$(EXESUF)
 gcov-files-test-qapi-util-y = qapi/qapi-util.c
+check-unit-y += tests/test-authz-list$(EXESUF)
 
 check-block-$(CONFIG_POSIX) += tests/qemu-iotests-quick.sh
 
@@ -670,6 +671,9 @@ tests/test-timed-average$(EXESUF): tests/test-timed-average.o $(test-util-obj-y)
 tests/test-base64$(EXESUF): tests/test-base64.o $(test-util-obj-y)
 tests/ptimer-test$(EXESUF): tests/ptimer-test.o tests/ptimer-test-stubs.o hw/core/ptimer.o
 
+tests/test-authz-list$(EXESUF): tests/test-authz-list.o \
+	$(test-util-obj-y) $(authz-obj-y) $(qom-obj-y)
+
 tests/test-logging$(EXESUF): tests/test-logging.o $(test-util-obj-y)
 
 tests/test-replication$(EXESUF): tests/test-replication.o $(test-util-obj-y) \
tests/test-authz-list.c new file +171 -0

171 lines not on this page · raw message

Signature · 1 line
2.17.1
#9 lore raw

PATCH v4 9/11 authz: add QAuthZListFile object type for a file access control list

In reply to Daniel P. Berrangé

Add a QAuthZListFile object type that implements the QAuthZ interface. This built-in implementation is a proxy around the QAtuhZList object type, initializing it from an external file, and optionally, automatically reloading it whenever it changes.

To create an instance of this object via the QMP monitor, the syntax used would be:

      {
        "execute": "object-add",
        "arguments": {
          "qom-type": "authz-list-file",
          "id": "authz0",
          "parameters": {
            "filename": "/etc/qemu/vnc.acl",
	    "refresh": "yes"
          }
        }
      }

If "refresh" is "yes", inotify is used to monitor the file, automatically reloading changes. If an error occurs during reloading, all authorizations will fail until the file is next successfully loaded.

The /etc/qemu/vnc.acl file would contain a JSON representation of a QAuthZList object

    {
      "rules": [
         { "match": "fred", "policy": "allow", "format": "exact" },
         { "match": "bob", "policy": "allow", "format": "exact" },
         { "match": "danb", "policy": "deny", "format": "glob" },
         { "match": "dan*", "policy": "allow", "format": "exact" },
      ],
      "policy": "deny"
    }

This sets up an authorization rule that allows 'fred', 'bob' and anyone whose name starts with 'dan', except for 'danb'. Everyone unmatched is denied.

The object can be loaded on the comand line using

-object authz-list-file,id=authz0,filename=/etc/qemu/vnc.acl,refresh=yes

---
 authz/Makefile.objs      |   1 +
 authz/listfile.c         | 284 +++++++++++++++++++++++++++++++++++++++
 authz/trace-events       |   4 +
 include/authz/listfile.h | 110 +++++++++++++++
 qemu-options.hx          |  47 +++++++
 5 files changed, 446 insertions(+)
 create mode 100644 authz/listfile.c
 create mode 100644 include/authz/listfile.h
authz/Makefile.objs +1 -0
index 921fa624d7..8351bf181d 100644
@@ -1,3 +1,4 @@
 authz-obj-y += base.o
 authz-obj-y += simple.o
 authz-obj-y += list.o
+authz-obj-y += listfile.o
authz/listfile.c new file +284 -0

284 lines not on this page · raw message

authz/trace-events +4 -0
index a896d876e8..fb65349a90 100644
@@ -9,3 +9,7 @@ qauthz_simple_is_allowed(void *authz, const char *wantidentity, const char *goti
 # auth/list.c
 qauthz_list_check_rule(void *authz, const char *identity, const char *rule, int format, int policy) "AuthZ list %p check rule=%s identity=%s format=%d policy=%d"
 qauthz_list_default_policy(void *authz, const char *identity, int policy) "AuthZ list %p default identity=%s policy=%d"
+
+# auth/listfile.c
+qauthz_list_file_load(void *authz, const char *filename) "AuthZ file %p load filename=%s"
+qauthz_list_file_refresh(void *authz, const char *filename, int success) "AuthZ file %p load filename=%s success=%d"
include/authz/listfile.h new file +110 -0

110 lines not on this page · raw message

qemu-options.hx +47 -0

53 lines not on this page · raw message

Signature · 1 line
2.17.1
#10 lore raw

PATCH v4 10/11 authz: add QAuthZPAM object type for authorizing using PAM

In reply to Daniel P. Berrangé

From: "Daniel P. Berrange" <[email protected]>

Add an authorization backend that talks to PAM to check whether the user identity is allowed. This only uses the PAM account validation facility, which is essentially just a check to see if the provided username is permitted access. It doesn't use the authentication or session parts of PAM, since that's dealt with by the relevant part of QEMU (eg VNC server).

Consider starting QEMU with a VNC server and telling it to use TLS with x509 client certificates and configuring it to use an PAM to validate the x509 distinguished name. In this example we're telling it to use PAM for the QAuthZ impl with a service name of "qemu-vnc"

 $ qemu-system-x86_64 \
     -object tls-creds-x509,id=tls0,dir=/home/berrange/security/qemutls,\
             endpoint=server,verify-peer=yes \
     -object authz-pam,id=authz0,service=qemu-vnc \
     -vnc :1,tls-creds=tls0,tls-authz=authz0

This requires an /etc/pam/qemu-vnc file to be created with the auth rules. A very simple file based whitelist can be setup using

  $ cat > /etc/pam/qemu-vnc <<EOF
  account         requisite       pam_listfile.so item=user sense=allow file=/etc/qemu/vnc.allow
  EOF

The /etc/qemu/vnc.allow file simply contains one username per line. Any username not in the file is denied. The usernames in this example are the x509 distinguished name from the client's x509 cert.

  $ cat > /etc/qemu/vnc.allow <<EOF
  CN=laptop.berrange.com,O=Berrange Home,L=London,ST=London,C=GB
  EOF

More interesting would be to configure PAM to use an LDAP backend, so that the QEMU authorization check data can be centralized instead of requiring each compute host to have file maintained.

The main limitation with this PAM module is that the rules apply to all QEMU instances on the host. Setting up different rules per VM, would require creating a separate PAM service name & config file for every guest. An alternative approach for the future might be to not pass in the plain username to PAM, but instead combine the VM name or UUID with the username. This requires further consideration though.

---
 authz/Makefile.objs     |   3 +
 authz/pamacct.c         | 149 ++++++++++++++++++++++++++++++++++++++++
 authz/trace-events      |   3 +
 configure               |  37 ++++++++++
 include/authz/pamacct.h | 100 +++++++++++++++++++++++++++
 qemu-options.hx         |  35 ++++++++++
 6 files changed, 327 insertions(+)
 create mode 100644 authz/pamacct.c
 create mode 100644 include/authz/pamacct.h
authz/Makefile.objs +3 -0
index 8351bf181d..ed7b273596 100644
@@ -2,3 +2,6 @@ authz-obj-y += base.o
 authz-obj-y += simple.o
 authz-obj-y += list.o
 authz-obj-y += listfile.o
+authz-obj-$(CONFIG_AUTH_PAM) += pamacct.o
+
+pamacct.o-libs = -lpam
authz/pamacct.c new file +149 -0

149 lines not on this page · raw message

authz/trace-events +3 -0
index fb65349a90..72c411927d 100644
@@ -13,3 +13,6 @@ qauthz_list_default_policy(void *authz, const char *identity, int policy) "AuthZ
 # auth/listfile.c
 qauthz_list_file_load(void *authz, const char *filename) "AuthZ file %p load filename=%s"
 qauthz_list_file_refresh(void *authz, const char *filename, int success) "AuthZ file %p load filename=%s success=%d"
+
+# auth/pam.c
+qauthz_pam_check(void *authz, const char *identity, const char *service) "AuthZ PAM %p identity=%s service=%s"
configure +37 -0
index 2a7796ea80..bebd84c541 100755
@@ -462,6 +462,7 @@ nettle_kdf="no"
 gcrypt=""
 gcrypt_hmac="no"
 gcrypt_kdf="no"
+auth_pam=""
 vte=""
 virglrenderer=""
 tpm="yes"
@@ -1359,6 +1360,10 @@ for opt do
   ;;
   --enable-gcrypt) gcrypt="yes"
   ;;
+  --disable-auth-pam) auth_pam="no"
+  ;;
+  --enable-auth-pam) auth_pam="yes"
+  ;;
   --enable-rdma) rdma="yes"
   ;;
   --disable-rdma) rdma="no"
@@ -1645,6 +1650,7 @@ disabled with --disable-FEATURE, default is enabled if available:
   gnutls          GNUTLS cryptography support
   nettle          nettle cryptography support
   gcrypt          libgcrypt cryptography support
+  auth-pam        PAM access control
   sdl             SDL UI
   --with-sdlabi     select preferred SDL ABI 1.2 or 2.0
   gtk             gtk UI
@@ -2885,6 +2891,33 @@ else
 fi
 
 
+##########################################
+# PAM probe
+
+if test "x$auth_pam" != "no"; then
+    cat > $TMPC <<EOF
+#include <security/pam_appl.h>
+#include <stdio.h>
+int main(void) {
+   const char *service_name = "qemu";
+   const char *user = "frank";
+   const struct pam_conv *pam_conv = NULL;
+   pam_handle_t *pamh = NULL;
+   pam_start(service_name, user, pam_conv, &pamh);
+   return 0;
+}
+EOF
+    if compile_prog "" "-lpam" ; then
+	auth_pam=yes
+    else
+	if test "$auth_pam" = "yes"; then
+	    feature_not_found "PAM" "Install pam-devel"
+	else
+	    auth_pam=no
+	fi
+    fi
+fi
+
 ##########################################
 # getifaddrs (for tests/test-io-channel-socket )
 
@@ -5909,6 +5942,7 @@ echo "libgcrypt kdf     $gcrypt_kdf"
 echo "nettle            $nettle $(echo_version $nettle $nettle_version)"
 echo "nettle kdf        $nettle_kdf"
 echo "libtasn1          $tasn1"
+echo "PAM               $auth_pam"
 echo "curses support    $curses"
 echo "virgl support     $virglrenderer $(echo_version $virglrenderer $virgl_version)"
 echo "curl support      $curl"
@@ -6373,6 +6407,9 @@ fi
 if test "$tasn1" = "yes" ; then
   echo "CONFIG_TASN1=y" >> $config_host_mak
 fi
+if test "$auth_pam" = "yes" ; then
+    echo "CONFIG_AUTH_PAM=y" >> $config_host_mak
+fi
 if test "$have_ifaddrs_h" = "yes" ; then
     echo "HAVE_IFADDRS_H=y" >> $config_host_mak
 fi
include/authz/pamacct.h new file +100 -0

100 lines not on this page · raw message

qemu-options.hx +35 -0
index 8fcea2fae2..ad8e0c4715 100644
@@ -4509,6 +4509,41 @@ would look like:
      ...
 @end example
 
+@item -object authz-pam,id=@var{id},service=@var{string}
+
+Create an authorization object that will control access to network services.
+
+The @option{service} parameter provides the name of a PAM service to use
+for authorization. It requires that a file @code{/etc/pam.d/@var{service}}
+exist to provide the configuration for the @code{account} subsystem.
+
+An example authorization object to validate a TLS x509 distinguished
+name would look like:
+
+@example
+ # $QEMU \
+     ...
+     -object authz-simple,id=auth0,service=qemu-vnc
+     ...
+@end example
+
+There would then be a corresponding config file for PAM at
+@code{/etc/pam.d/qemu-vnc} that contains:
+
+@example
+account requisite  pam_listfile.so item=user sense=allow \
+           file=/etc/qemu/vnc.allow
+@end example
+
+Finally the @code{/etc/qemu/vnc.allow} file would contain
+the list of x509 distingished names that are permitted
+access
+
+@example
+CN=laptop.example.com,O=Example Home,L=London,ST=London,C=GB
+@end example
+
+
 @end table
 
 ETEXI
Signature · 1 line
2.17.1
#11 lore raw

PATCH v4 11/11 authz: delete existing ACL implementation

In reply to Daniel P. Berrangé

From: "Daniel P. Berrange" <[email protected]>

The 'qemu_acl' type was a previous non-QOM based attempt to provide an authorization facility in QEMU. Because it is non-QOM based it cannot be created via the command line and requires special monitor commands to manipulate it.

The new QAuthZ subclasses provide a superset of the functionality in qemu_acl, so the latter can now be deleted. The HMP 'acl_*' monitor commands are converted to use the new QAuthZSimple data type instead in order to provide temporary backwards compatibility.

---
 crypto/tlssession.c            |  35 ++++---
 crypto/trace-events            |   2 +-
 include/qemu/acl.h             |  66 ------------
 monitor.c                      | 180 ++++++++++++++++++++++-----------
 tests/Makefile.include         |   4 +-
 tests/test-crypto-tlssession.c |  15 ++-
 tests/test-io-channel-tls.c    |  16 ++-
 ui/vnc-auth-sasl.c             |  23 +++--
 ui/vnc-auth-sasl.h             |   5 +-
 ui/vnc-auth-vencrypt.c         |   2 +-
 ui/vnc-ws.c                    |   2 +-
 ui/vnc.c                       |  37 ++++---
 ui/vnc.h                       |   4 +-
 util/Makefile.objs             |   1 -
 util/acl.c                     | 179 --------------------------------
 15 files changed, 210 insertions(+), 361 deletions(-)
 delete mode 100644 include/qemu/acl.h
 delete mode 100644 util/acl.c
crypto/tlssession.c +17 -18
index 66a6fbe19c..23842aa95d 100644
@@ -24,7 +24,7 @@
 #include "crypto/tlscredspsk.h"
 #include "crypto/tlscredsx509.h"
 #include "qapi/error.h"
-#include "qemu/acl.h"
+#include "authz/base.h"
 #include "trace.h"
 
 #ifdef CONFIG_GNUTLS
@@ -37,7 +37,7 @@ struct QCryptoTLSSession {
     QCryptoTLSCreds *creds;
     gnutls_session_t handle;
     char *hostname;
-    char *aclname;
+    char *authzid;
     bool handshakeComplete;
     QCryptoTLSSessionWriteFunc writeFunc;
     QCryptoTLSSessionReadFunc readFunc;
@@ -56,7 +56,7 @@ qcrypto_tls_session_free(QCryptoTLSSession *session)
     gnutls_deinit(session->handle);
     g_free(session->hostname);
     g_free(session->peername);
-    g_free(session->aclname);
+    g_free(session->authzid);
     object_unref(OBJECT(session->creds));
     g_free(session);
 }
@@ -101,7 +101,7 @@ qcrypto_tls_session_pull(void *opaque, void *buf, size_t len)
 QCryptoTLSSession *
 qcrypto_tls_session_new(QCryptoTLSCreds *creds,
                         const char *hostname,
-                        const char *aclname,
+                        const char *authzid,
                         QCryptoTLSCredsEndpoint endpoint,
                         Error **errp)
 {
@@ -111,13 +111,13 @@ qcrypto_tls_session_new(QCryptoTLSCreds *creds,
     session = g_new0(QCryptoTLSSession, 1);
     trace_qcrypto_tls_session_new(
         session, creds, hostname ? hostname : "<none>",
-        aclname ? aclname : "<none>", endpoint);
+        authzid ? authzid : "<none>", endpoint);
 
     if (hostname) {
         session->hostname = g_strdup(hostname);
     }
-    if (aclname) {
-        session->aclname = g_strdup(aclname);
+    if (authzid) {
+        session->authzid = g_strdup(authzid);
     }
     session->creds = creds;
     object_ref(OBJECT(creds));
@@ -268,6 +268,7 @@ qcrypto_tls_session_check_certificate(QCryptoTLSSession *session,
     unsigned int nCerts, i;
     time_t now;
     gnutls_x509_crt_t cert = NULL;
+    Error *err = NULL;
 
     now = time(NULL);
     if (now == ((time_t)-1)) {
@@ -355,19 +356,17 @@ qcrypto_tls_session_check_certificate(QCryptoTLSSession *session,
                            gnutls_strerror(ret));
                 goto error;
             }
-            if (session->aclname) {
-                qemu_acl *acl = qemu_acl_find(session->aclname);
-                int allow;
-                if (!acl) {
-                    error_setg(errp, "Cannot find ACL %s",
-                               session->aclname);
+            if (session->authzid) {
+                bool allow;
+
+                allow = qauthz_is_allowed_by_id(session->authzid,
+                                                session->peername, &err);
+                if (err) {
+                    error_propagate(errp, err);
                     goto error;
                 }
-
-                allow = qemu_acl_party_is_allowed(acl, session->peername);
-
                 if (!allow) {
-                    error_setg(errp, "TLS x509 ACL check for %s is denied",
+                    error_setg(errp, "TLS x509 authz check for %s is denied",
                                session->peername);
                     goto error;
                 }
@@ -558,7 +557,7 @@ qcrypto_tls_session_get_peer_name(QCryptoTLSSession *session)
 QCryptoTLSSession *
 qcrypto_tls_session_new(QCryptoTLSCreds *creds G_GNUC_UNUSED,
                         const char *hostname G_GNUC_UNUSED,
-                        const char *aclname G_GNUC_UNUSED,
+                        const char *authzid G_GNUC_UNUSED,
                         QCryptoTLSCredsEndpoint endpoint G_GNUC_UNUSED,
                         Error **errp)
 {
crypto/trace-events +1 -1
index 597389b73c..a38ad7b787 100644
@@ -19,5 +19,5 @@ qcrypto_tls_creds_x509_load_cert(void *creds, int isServer, const char *file) "T
 qcrypto_tls_creds_x509_load_cert_list(void *creds, const char *file) "TLS creds x509 load cert list creds=%p file=%s"
 
 # crypto/tlssession.c
-qcrypto_tls_session_new(void *session, void *creds, const char *hostname, const char *aclname, int endpoint) "TLS session new session=%p creds=%p hostname=%s aclname=%s endpoint=%d"
+qcrypto_tls_session_new(void *session, void *creds, const char *hostname, const char *authzid, int endpoint) "TLS session new session=%p creds=%p hostname=%s authzid=%s endpoint=%d"
 qcrypto_tls_session_check_creds(void *session, const char *status) "TLS session check creds session=%p status=%s"
include/qemu/acl.h deleted +0 -66

66 lines not on this page · raw message

monitor.c +120 -60

233 lines not on this page · raw message

tests/Makefile.include +2 -2
index 50157934c1..9a40971a83 100644
@@ -614,8 +614,8 @@ test-qom-obj-y = $(qom-obj-y) $(test-util-obj-y)
 test-qapi-obj-y = tests/test-qapi-visit.o tests/test-qapi-types.o \
 	tests/test-qapi-events.o tests/test-qapi-introspect.o \
 	$(test-qom-obj-y)
-benchmark-crypto-obj-y = $(crypto-obj-y) $(test-qom-obj-y)
-test-crypto-obj-y = $(crypto-obj-y) $(test-qom-obj-y)
+benchmark-crypto-obj-y = $(authz-obj-y) $(crypto-obj-y) $(test-qom-obj-y)
+test-crypto-obj-y = $(authz-obj-y) $(crypto-obj-y) $(test-qom-obj-y)
 test-io-obj-y = $(io-obj-y) $(test-crypto-obj-y)
 test-block-obj-y = $(block-obj-y) $(test-io-obj-y) tests/iothread.o
 
tests/test-crypto-tlssession.c +10 -5
index 6fa9950afb..15212ec276 100644
@@ -28,7 +28,7 @@
 #include "qom/object_interfaces.h"
 #include "qapi/error.h"
 #include "qemu/sockets.h"
-#include "qemu/acl.h"
+#include "authz/list.h"
 
 #ifdef QCRYPTO_HAVE_TLS_TEST_SUPPORT
 
@@ -229,7 +229,7 @@ static void test_crypto_tls_session_x509(const void *opaque)
     QCryptoTLSCreds *serverCreds;
     QCryptoTLSSession *clientSess = NULL;
     QCryptoTLSSession *serverSess = NULL;
-    qemu_acl *acl;
+    QAuthZList *auth;
     const char * const *wildcards;
     int channel[2];
     bool clientShake = false;
@@ -285,11 +285,15 @@ static void test_crypto_tls_session_x509(const void *opaque)
         SERVER_CERT_DIR);
     g_assert(serverCreds != NULL);
 
-    acl = qemu_acl_init("tlssessionacl");
-    qemu_acl_reset(acl);
+    auth = qauthz_list_new("tlssessionacl",
+                           QAUTHZ_LIST_POLICY_DENY,
+                           &error_abort);
     wildcards = data->wildcards;
     while (wildcards && *wildcards) {
-        qemu_acl_append(acl, 0, *wildcards);
+        qauthz_list_append_rule(auth, *wildcards,
+                                QAUTHZ_LIST_POLICY_ALLOW,
+                                QAUTHZ_LIST_FORMAT_GLOB,
+                                &error_abort);
         wildcards++;
     }
 
@@ -377,6 +381,7 @@ static void test_crypto_tls_session_x509(const void *opaque)
 
     object_unparent(OBJECT(serverCreds));
     object_unparent(OBJECT(clientCreds));
+    object_unparent(OBJECT(auth));
 
     qcrypto_tls_session_free(serverSess);
     qcrypto_tls_session_free(clientSess);
tests/test-io-channel-tls.c +11 -5
index 4900c6d433..43b707eba7 100644
@@ -29,8 +29,8 @@
 #include "io-channel-helpers.h"
 #include "crypto/init.h"
 #include "crypto/tlscredsx509.h"
-#include "qemu/acl.h"
 #include "qapi/error.h"
+#include "authz/list.h"
 #include "qom/object_interfaces.h"
 
 #ifdef QCRYPTO_HAVE_TLS_TEST_SUPPORT
@@ -113,7 +113,7 @@ static void test_io_channel_tls(const void *opaque)
     QIOChannelTLS *serverChanTLS;
     QIOChannelSocket *clientChanSock;
     QIOChannelSocket *serverChanSock;
-    qemu_acl *acl;
+    QAuthZList *auth;
     const char * const *wildcards;
     int channel[2];
     struct QIOChannelTLSHandshakeData clientHandshake = { false, false };
@@ -161,11 +161,15 @@ static void test_io_channel_tls(const void *opaque)
         SERVER_CERT_DIR);
     g_assert(serverCreds != NULL);
 
-    acl = qemu_acl_init("channeltlsacl");
-    qemu_acl_reset(acl);
+    auth = qauthz_list_new("channeltlsacl",
+                           QAUTHZ_LIST_POLICY_DENY,
+                           &error_abort);
     wildcards = data->wildcards;
     while (wildcards && *wildcards) {
-        qemu_acl_append(acl, 0, *wildcards);
+        qauthz_list_append_rule(auth, *wildcards,
+                                QAUTHZ_LIST_POLICY_ALLOW,
+                                QAUTHZ_LIST_FORMAT_GLOB,
+                                &error_abort);
         wildcards++;
     }
 
@@ -253,6 +257,8 @@ static void test_io_channel_tls(const void *opaque)
     object_unref(OBJECT(serverChanSock));
     object_unref(OBJECT(clientChanSock));
 
+    object_unparent(OBJECT(auth));
+
     close(channel[0]);
     close(channel[1]);
 }
ui/vnc-auth-sasl.c +16 -7
index 3751a777a4..7b2b09f242 100644
@@ -24,6 +24,7 @@
 
 #include "qemu/osdep.h"
 #include "qapi/error.h"
+#include "authz/base.h"
 #include "vnc.h"
 #include "trace.h"
 
@@ -146,13 +147,14 @@ size_t vnc_client_read_sasl(VncState *vs)
 static int vnc_auth_sasl_check_access(VncState *vs)
 {
     const void *val;
-    int err;
-    int allow;
+    int rv;
+    Error *err = NULL;
+    bool allow;
 
-    err = sasl_getprop(vs->sasl.conn, SASL_USERNAME, &val);
-    if (err != SASL_OK) {
+    rv = sasl_getprop(vs->sasl.conn, SASL_USERNAME, &val);
+    if (rv != SASL_OK) {
         trace_vnc_auth_fail(vs, vs->auth, "Cannot fetch SASL username",
-                            sasl_errstring(err, NULL, NULL));
+                            sasl_errstring(rv, NULL, NULL));
         return -1;
     }
     if (val == NULL) {
@@ -163,12 +165,19 @@ static int vnc_auth_sasl_check_access(VncState *vs)
     vs->sasl.username = g_strdup((const char*)val);
     trace_vnc_auth_sasl_username(vs, vs->sasl.username);
 
-    if (vs->vd->sasl.acl == NULL) {
+    if (vs->vd->sasl.authzid == NULL) {
         trace_vnc_auth_sasl_acl(vs, 1);
         return 0;
     }
 
-    allow = qemu_acl_party_is_allowed(vs->vd->sasl.acl, vs->sasl.username);
+    allow = qauthz_is_allowed_by_id(vs->vd->sasl.authzid,
+                                    vs->sasl.username, &err);
+    if (err) {
+        trace_vnc_auth_fail(vs, vs->auth, "Error from authz",
+                            error_get_pretty(err));
+        error_free(err);
+        return -1;
+    }
 
     trace_vnc_auth_sasl_acl(vs, allow);
     return allow ? 0 : -1;
ui/vnc-auth-sasl.h +3 -2
index 2ae224ee3a..fb55fe04ca 100644
@@ -30,8 +30,8 @@
 typedef struct VncStateSASL VncStateSASL;
 typedef struct VncDisplaySASL VncDisplaySASL;
 
-#include "qemu/acl.h"
 #include "qemu/main-loop.h"
+#include "authz/base.h"
 
 struct VncStateSASL {
     sasl_conn_t *conn;
@@ -60,7 +60,8 @@ struct VncStateSASL {
 };
 
 struct VncDisplaySASL {
-    qemu_acl *acl;
+    QAuthZ *authz;
+    char *authzid;
 };
 
 void vnc_sasl_client_cleanup(VncState *vs);
ui/vnc-auth-vencrypt.c +1 -1
index d99ea362c1..f072e16ace 100644
@@ -109,7 +109,7 @@ static int protocol_client_vencrypt_auth(VncState *vs, uint8_t *data, size_t len
         tls = qio_channel_tls_new_server(
             vs->ioc,
             vs->vd->tlscreds,
-            vs->vd->tlsaclname,
+            vs->vd->tlsauthzid,
             &err);
         if (!tls) {
             trace_vnc_auth_fail(vs, vs->auth, "TLS setup failed",
ui/vnc-ws.c +1 -1
index 950f1cd2ac..95c9703c72 100644
@@ -62,7 +62,7 @@ gboolean vncws_tls_handshake_io(QIOChannel *ioc G_GNUC_UNUSED,
     tls = qio_channel_tls_new_server(
         vs->ioc,
         vs->vd->tlscreds,
-        vs->vd->tlsaclname,
+        vs->vd->tlsauthzid,
         &err);
     if (!tls) {
         VNC_DEBUG("Failed to setup TLS %s\n", error_get_pretty(err));
ui/vnc.c +25 -12
index 359693238b..9fb8430c35 100644
@@ -33,7 +33,7 @@
 #include "qemu/option.h"
 #include "qemu/sockets.h"
 #include "qemu/timer.h"
-#include "qemu/acl.h"
+#include "authz/list.h"
 #include "qemu/config-file.h"
 #include "qapi/qapi-events.h"
 #include "qapi/error.h"
@@ -3267,12 +3267,24 @@ static void vnc_display_close(VncDisplay *vd)
         object_unparent(OBJECT(vd->tlscreds));
         vd->tlscreds = NULL;
     }
-    g_free(vd->tlsaclname);
-    vd->tlsaclname = NULL;
+    if (vd->tlsauthz) {
+        object_unparent(OBJECT(vd->tlsauthz));
+        vd->tlsauthz = NULL;
+    }
+    g_free(vd->tlsauthzid);
+    vd->tlsauthzid = NULL;
     if (vd->lock_key_sync) {
         qemu_remove_led_event_handler(vd->led);
         vd->led = NULL;
     }
+#ifdef CONFIG_VNC_SASL
+    if (vd->sasl.authz) {
+        object_unparent(OBJECT(vd->sasl.authz));
+        vd->sasl.authz = NULL;
+    }
+    g_free(vd->sasl.authzid);
+    vd->sasl.authzid = NULL;
+#endif
 }
 
 int vnc_display_password(const char *id, const char *password)
@@ -4019,23 +4031,24 @@ void vnc_display_open(const char *id, Error **errp)
 
     if (acl) {
         if (strcmp(vd->id, "default") == 0) {
-            vd->tlsaclname = g_strdup("vnc.x509dname");
+            vd->tlsauthzid = g_strdup("vnc.x509dname");
         } else {
-            vd->tlsaclname = g_strdup_printf("vnc.%s.x509dname", vd->id);
+            vd->tlsauthzid = g_strdup_printf("vnc.%s.x509dname", vd->id);
         }
-        qemu_acl_init(vd->tlsaclname);
+        vd->tlsauthz = QAUTHZ(qauthz_list_new(vd->tlsauthzid,
+                                              QAUTHZ_LIST_POLICY_DENY,
+                                              &error_abort));
     }
 #ifdef CONFIG_VNC_SASL
     if (acl && sasl) {
-        char *aclname;
-
         if (strcmp(vd->id, "default") == 0) {
-            aclname = g_strdup("vnc.username");
+            vd->sasl.authzid = g_strdup("vnc.username");
         } else {
-            aclname = g_strdup_printf("vnc.%s.username", vd->id);
+            vd->sasl.authzid = g_strdup_printf("vnc.%s.username", vd->id);
         }
-        vd->sasl.acl = qemu_acl_init(aclname);
-        g_free(aclname);
+        vd->sasl.authz = QAUTHZ(qauthz_list_new(vd->sasl.authzid,
+                                                QAUTHZ_LIST_POLICY_DENY,
+                                                &error_abort));
     }
 #endif
 
ui/vnc.h +3 -1
index a86e0610e8..29ee1738a5 100644
@@ -39,6 +39,7 @@
 #include "io/channel-socket.h"
 #include "io/channel-tls.h"
 #include "io/net-listener.h"
+#include "authz/base.h"
 #include <zlib.h>
 
 #include "keymaps.h"
@@ -177,7 +178,8 @@ struct VncDisplay
     bool lossy;
     bool non_adaptive;
     QCryptoTLSCreds *tlscreds;
-    char *tlsaclname;
+    QAuthZ *tlsauthz;
+    char *tlsauthzid;
 #ifdef CONFIG_VNC_SASL
     VncDisplaySASL sasl;
 #endif
util/Makefile.objs +0 -1
index 769d295a27..99a808014e 100644
@@ -19,7 +19,6 @@ util-obj-y += envlist.o path.o module.o
 util-obj-y += host-utils.o
 util-obj-y += bitmap.o bitops.o hbitmap.o
 util-obj-y += fifo8.o
-util-obj-y += acl.o
 util-obj-y += cacheinfo.o
 util-obj-y += error.o qemu-error.o
 util-obj-y += id.o
util/acl.c deleted +0 -179

179 lines not on this page · raw message

Signature · 1 line
2.17.1
#12 lore raw
In reply to Daniel P. Berrangé

Ping, is anyone able to review this series ?

Quoted 134 lines · Daniel P. Berrangé

An update to

v2: https://lists.gnu.org/archive/html/qemu-devel/2018-06/msg04469.html
v3: https://lists.gnu.org/archive/html/qemu-devel/2018-06/msg05660.html

The current network services now support encryption via TLS and in some cases support authentication via SASL. In cases where SASL is not available, x509 client certificates can be used as a crude authorization scheme, but using a sub-CA and controlling who you give certs to. In general this is not very flexible though, so this series introduces a new standard authorization framework.

It comes with four initial authorization mechanisms

- Simple - an exact username match. This is useful when there is exactly one user that is known to connect. For example when live migrating from one QEMU to another with TLS, libvirt would use the simple scheme to whitelist the TLS cert of the source QEMU.

- List - an full access control list, with optional regex matching. This is more flexible and is used to provide 100% backcompat with the existing HMP ACL commands. The caveat is that we can't create these via the CLI -object arg yet.

- ListFile - the same as List, but with the rules stored in JSON format in an external file. This avoids the -object limitation while also allowing the admin to change list entries on the file. QEMU uses inotify to notice these changes and auto-reload the file contents. This is likely a good default choice for most network services, if the "simple" mechanism isn't sufficient.

- PAM - delegate the username lookup to a PAM module, which opens the door to many options including things like SQL/LDAP lookups.

A later series that follows will integrate this framework into the VNC, NBD, migration, and character device servers.

Changed in v4:

- Rebase to latest git master

Changed in v3:

- Added docs for object types in qemu-options.hx
- Added example CLI syntax in header files
- Improved commit messages

Changed in v2:

- Switch to a global shared instance of the file monitor so only a single inotify file descriptor is required

- Require all watches to be registered against directories. File watches are useless in Linux, since they are tied to inodes, and so stop working when editors save by doing a tmpfile + rename dance.

- Change auth list impl to use a directory based watch instead of filename

- Put MTP const-ness fixes in separate patch

- Split QOM change off into separate patch

- Fix conditionals on Win32 build

Daniel P. Berrangé (11):
util: add helper APIs for dealing with inotify in portable manner
qom: don't require user creatable objects to be registered hw/usb: don't set IN_ISDIR for inotify watch in MTP driver hw/usb: fix const-ness for string params in MTP driver hw/usb: switch MTP to use new inotify APIs
authz: add QAuthZ object as an authorization base class
authz: add QAuthZSimple object type for easy whitelist auth checks
authz: add QAuthZList object type for an access control list
authz: add QAuthZListFile object type for a file access control list
authz: add QAuthZPAM object type for authorizing using PAM
authz: delete existing ACL implementation

 .gitignore                     |   4 +
 MAINTAINERS                    |  14 ++
 Makefile                       |  17 +-
 Makefile.objs                  |  10 ++
 Makefile.target                |   2 +
 authz/Makefile.objs            |   7 +
 authz/base.c                   |  82 +++++++++
 authz/list.c                   | 315 +++++++++++++++++++++++++++++++++
 authz/listfile.c               | 284 +++++++++++++++++++++++++++++
 authz/pamacct.c                | 149 ++++++++++++++++
 authz/simple.c                 | 122 +++++++++++++
 authz/trace-events             |  18 ++
 configure                      |  37 ++++
 crypto/tlssession.c            |  35 ++--
 crypto/trace-events            |   2 +-
 hw/usb/dev-mtp.c               | 257 ++++++++++-----------------
 hw/usb/trace-events            |   2 +-
 include/authz/base.h           | 112 ++++++++++++
 include/authz/list.h           | 106 +++++++++++
 include/authz/listfile.h       | 110 ++++++++++++
 include/authz/pamacct.h        | 100 +++++++++++
 include/authz/simple.h         |  84 +++++++++
 include/qemu/acl.h             |  66 -------
 include/qemu/filemonitor.h     | 117 ++++++++++++
 monitor.c                      | 180 ++++++++++++-------
 qapi/authz.json                |  58 ++++++
 qapi/qapi-schema.json          |   1 +
 qemu-options.hx                | 103 +++++++++++
 qom/object.c                   |  12 +-
 qom/object_interfaces.c        |  16 +-
 tests/Makefile.include         |   8 +-
 tests/test-authz-list.c        | 171 ++++++++++++++++++
 tests/test-crypto-tlssession.c |  15 +-
 tests/test-io-channel-tls.c    |  16 +-
 ui/vnc-auth-sasl.c             |  23 ++-
 ui/vnc-auth-sasl.h             |   5 +-
 ui/vnc-auth-vencrypt.c         |   2 +-
 ui/vnc-ws.c                    |   2 +-
 ui/vnc.c                       |  37 ++--
 ui/vnc.h                       |   4 +-
 util/Makefile.objs             |   2 +-
 util/acl.c                     | 179 -------------------
 util/filemonitor.c             | 315 +++++++++++++++++++++++++++++++++
 util/trace-events              |   9 +
 44 files changed, 2671 insertions(+), 539 deletions(-)
 create mode 100644 authz/Makefile.objs
 create mode 100644 authz/base.c
 create mode 100644 authz/list.c
 create mode 100644 authz/listfile.c
 create mode 100644 authz/pamacct.c
 create mode 100644 authz/simple.c
 create mode 100644 authz/trace-events
 create mode 100644 include/authz/base.h
 create mode 100644 include/authz/list.h
 create mode 100644 include/authz/listfile.h
Quoted 12 lines
 create mode 100644 include/authz/pamacct.h
 create mode 100644 include/authz/simple.h
 delete mode 100644 include/qemu/acl.h
 create mode 100644 include/qemu/filemonitor.h
 create mode 100644 qapi/authz.json
 create mode 100644 tests/test-authz-list.c
 delete mode 100644 util/acl.c
 create mode 100644 util/filemonitor.c
Signature · 1 line
2.17.1

Regards,
Daniel

Signature · 3 lines
|: https://berrange.com      -o-    https://www.flickr.com/photos/dberrange :|
|: https://libvirt.org         -o-            https://fstop138.berrange.com :|
|: https://entangle-photo.org    -o-    https://www.instagram.com/dberrange :|