Skip to contentSkip to conversation

DM: GPIO: Fix da8xx GPIO indexing over GPIO 32

PATCH In review Adam Ford 2 participants 2 messages Aug 17, 2018 – Sep 18, 2018 GPIO

lore
Share & tools
lore

Adam Ford

author
#0 lore raw

PATCH 1/1 DM: GPIO: Fix da8xx GPIO indexing over GPIO 32

The GPIO banks are broken up into two 16-bit registers for each bank set. Unfortunately, the math that determines how to shift blindly shifted by the number of the gpio. This worked for gpio numbers under 32, but higher gpio's are broken. This fixes the gpio index, so the bank is passed and the shift amount within the register is passed now instead of the gpio number.

Fixes 8e51c0f25406("dm: gpio: Add DM compatibility to

GPIO driver for Davinci")

drivers/gpio/da8xx_gpio.c +15 -7
index 1a1d37ae2a..3e95f039f0 100644
@@ -13,6 +13,7 @@
 #include <asm/gpio.h>
 #include <asm/arch/hardware.h>
 #include <asm/arch/davinci_misc.h>
+#include <dt-bindings/gpio/gpio.h>
 
 #ifndef CONFIG_DM_GPIO
 static struct gpio_registry {
@@ -429,20 +430,27 @@ int gpio_set_value(unsigned int gpio, int value)
 static struct davinci_gpio *davinci_get_gpio_bank(struct udevice *dev, unsigned int offset)
 {
 	struct davinci_gpio_bank *bank = dev_get_priv(dev);
+	unsigned int addr;
 
-	/* The device tree is not broken into banks but the infrastructure is
+	/*
+	 * The device tree is not broken into banks but the infrastructure is
 	 * expecting it this way, so we'll first include the 0x10 offset, then
 	 * calculate the bank manually based on the offset.
+	 * Casting 'addr' as Unsigned long is needed to make the math work.
 	 */
-
-	return ((struct davinci_gpio *)bank->base) + 0x10 + (offset >> 5);
+	addr = ((unsigned long)(struct davinci_gpio *)bank->base) +
+			0x10 + (0x28 * (offset >> 5));
+	return (struct davinci_gpio *)addr;
 }
 
 static int davinci_gpio_direction_input(struct udevice *dev, unsigned int offset)
 {
 	struct davinci_gpio *base = davinci_get_gpio_bank(dev, offset);
 
-	_gpio_direction_input(base, offset);
+	/*
+	 * Fetch the address based on GPIO, but only pass the masked low 32-bits
+	 */
+	_gpio_direction_input(base, (offset & 0x1f));
 	return 0;
 }
 
@@ -451,7 +459,7 @@ static int davinci_gpio_direction_output(struct udevice *dev, unsigned int offse
 {
 	struct davinci_gpio *base = davinci_get_gpio_bank(dev, offset);
 
-	_gpio_direction_output(base, offset, value);
+	_gpio_direction_output(base, (offset & 0x1f), value);
 	return 0;
 }
 
@@ -459,7 +467,7 @@ static int davinci_gpio_get_value(struct udevice *dev, unsigned int offset)
 {
 	struct davinci_gpio *base = davinci_get_gpio_bank(dev, offset);
 
-	return _gpio_get_value(base, offset);
+	return _gpio_get_value(base, (offset & 0x1f));
 }
 
 static int davinci_gpio_set_value(struct udevice *dev, unsigned int offset,
@@ -467,7 +475,7 @@ static int davinci_gpio_set_value(struct udevice *dev, unsigned int offset,
 {
 	struct davinci_gpio *base = davinci_get_gpio_bank(dev, offset);
 
-	_gpio_set_value(base, offset, value);
+	_gpio_set_value(base, (offset & 0x1f), value);
 
 	return 0;
 }
Signature · 1 line
2.17.1
#1 lore raw

drivers/gpio/da8xx_gpio.c

Quoted 14 lines · Adam Ford

The GPIO banks are broken up into two 16-bit registers for each bank set. Unfortunately, the math that determines how to shift blindly shifted by the number of the gpio. This worked for gpio numbers under 32, but higher gpio's are broken. This fixes the gpio index, so the bank is passed and the shift amount within the register is passed now instead of the gpio number.

Fixes 8e51c0f25406("dm: gpio: Add DM compatibility to

GPIO driver for Davinci")

drivers/gpio/da8xx_gpio.c +0 -0
index 1a1d37ae2a..3e95f039f0 100644

Applied to u-boot/master, thanks!

Signature · 8 lines
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20180918/1fd9fe04/attachment.sig>