ARM: omap3_logic_defconfig: Convert to DM_SPL
PATCH 1/1 ARM: omap3_logic_defconfig: Convert to DM_SPL
The OF_CONTROL and OF_PLATDATA are not really useful without DM. This patch supports DM_SPL, but it requires manual references both Serial and MMC.
Signed-off-by Adam Ford <[email protected]>
board/logicpd/omap3som/omap3logic.c +31 -0
@@ -24,6 +24,7 @@#include <asm/arch/mem.h> #include <asm/arch/sys_proto.h> #include <asm/gpio.h> +#include <asm/omap_mmc.h> #include <asm/mach-types.h> #include <linux/mtd/rawnand.h> #include <asm/omap_musb.h>
@@ -39,6 +40,36 @@DECLARE_GLOBAL_DATA_PTR ; +/* This is only needed until SPL gets OF support */ +#ifdef CONFIG_SPL_BUILD +static const struct ns16550_platdata omap3logic_serial = { + .base =OMAP34XX_UART1 , + .reg_shift =2 , + .clock =V_NS16550_CLK , + .fcr =UART_FCR_DEFVAL , +}; + +U_BOOT_DEVICE (omap3logic_uart) = { +"ns16550_serial" , + &omap3logic_serial +}; + +static const struct omap_hsmmc_plat omap3_logic_mmc0_platdata = { + .base_addr = (struct hsmmc *)OMAP_HSMMC1_BASE , + .cfg.host_caps = MMC_MODE_HS_52MHz |MMC_MODE_HS |MMC_MODE_4BIT , + .cfg.f_min =400000 , + .cfg.f_max =52000000 , + .cfg.voltages =MMC_VDD_32_33 |MMC_VDD_33_34 |MMC_VDD_165_195 , + .cfg.b_max =CONFIG_SYS_MMC_MAX_BLK_COUNT , +}; + +U_BOOT_DEVICE (am335x_mmc0) = { + .name ="omap_hsmmc" , + .platdata = &omap3_logic_mmc0_platdata, +}; + +#endif +/* * two dimensional array of strucures containining board name and Linux * machine IDs; row it selected based on CPU column is slected based
configs/omap3_logic_defconfig +4 -2
@@ -1,11 +1,11 @@ CONFIG_ARM=y CONFIG_ARCH_OMAP2PLUS=y CONFIG_TI_COMMON_CMD_OPTIONS=y +# CONFIG_SPL_GPIO_SUPPORT is not set CONFIG_SYS_MALLOC_F_LEN=0x2000 CONFIG_TARGET_OMAP3_LOGIC=y # CONFIG_SPL_OMAP3_ID_NAND is not set CONFIG_SPL=y -CONFIG_DEFAULT_DEVICE_TREE="logicpd-torpedo-37xx-devkit" CONFIG_DISTRO_DEFAULTS=y CONFIG_NR_DRAM_BANKS=2 # CONFIG_USE_BOOTCOMMAND is not set
@@ -29,9 +29,11 @@ CONFIG_MTDPARTS_DEFAULT="mtdparts=omap2-nand.0:512k(MLO),1792k(u-boot),128k(spl- CONFIG_CMD_UBI=y CONFIG_OF_CONTROL=y CONFIG_SPL_OF_CONTROL=y +CONFIG_DEFAULT_DEVICE_TREE="logicpd-torpedo-37xx-devkit" CONFIG_SPL_OF_PLATDATA=y # CONFIG_ENV_IS_IN_FAT is not set CONFIG_ENV_IS_IN_NAND=y +CONFIG_SPL_DM=y CONFIG_USB_FUNCTION_FASTBOOT=y CONFIG_FASTBOOT_BUF_ADDR=0x82000000 CONFIG_DM_I2C=y
@@ -43,10 +45,10 @@ CONFIG_SYS_NAND_BUSWIDTH_16BIT=y CONFIG_SYS_NAND_U_BOOT_LOCATIONS=y CONFIG_SYS_NAND_U_BOOT_OFFS=0x80000 CONFIG_SPL_NAND_SIMPLE=y -CONFIG_NETDEVICES=y CONFIG_SMC911X=y CONFIG_SMC911X_BASE=0x08000000 CONFIG_SMC911X_32_BIT=y +CONFIG_SPECIFY_CONSOLE_INDEX=y CONFIG_SYS_NS16550=y CONFIG_SPI=y CONFIG_DM_SPI=y
Signature · 1 line
2.17.1
board/logicpd/omap3som/omap3logic.c
Quoted 8 lines · Adam Ford
The
OF_CONTROLandOF_PLATDATAare not really useful without DM. This patch supportsDM_SPL, but it requires manual references both Serial and MMC.Signed-off-by Adam Ford <[email protected]>board/logicpd/omap3som/omap3logic.c +0
-0
Applied to u-boot/master, thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: not available URL: <http://lists.denx.de/pipermail/u-boot/attachments/20180918/0133cff1/attachment.sig>